• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Njoy, LLC / Njoy Holdings, Inc. v. Juul Labs, Inc.No claims unpatentable
  PTAB · Jun 10, 2025 · IPR2024-00231 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 14–16, 18, 27–29, 31, and 32 were not proven unpatentable because the asserted references failed to establish the claimed airflow path or a reason to make the proposed combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s and Patent Owner’s proposed levels of skill are similar and differ in that Petitioner’s relevant degrees and corresponding two years of experience additionally includes “industrial design” and “product design” and familiarity with “electrically powered vaporizing articles, their components or the underlying technologies” where Patent Owner requires two years of experience “designing electro-mechanical consumer products or an advanced degree.” Compare Pet. 7, with PO Resp. 2. Patent Owner alleges that “Petitioner has failed to establish unpatentability under either standard,” indicating that the level of skill in the art is not a dispositive issue. PO Resp. 3. In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’123 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’123 patent and the prior art. We note that the outcome of this Decision would be the same under Patent Owner’s proposed definition.” slip op. at 11

  • Expert testimonyPetitioner expert creditedOther

    “In this case, Mr. McAlexander meets both Petitioner’s and Patent Owner’s proposed level of skill in the art. As a result, we are persuaded Mr. McAlexander has the requisite skill and relevant expertise to offer testimony in this matter. For example, Mr. McAlexander has a Bachelor’s Degree in Electrical Engineering and far more than 2 years of experience in the electrical engineering field. Ex. 1027, 3–6, 7. In addition, Mr. McAlexander has provided expert consulting services in a wide range of technology areas involving the process and design of electro-mechanical consumer products. Ex. 1003 ¶ 5. Through one of Mr. McAlexander’s business ventures, his laboratory has “performed detailed airflow analyses, designing and constructing specialized apparatuses to emulate human breath, allowing for precise activation testing of ENDS devices.” Ex. 1043 ¶ 16. That said, a declarant’s expertise, even clothed as a skilled artisan, does not entitle a naked opinion persuasive weight. Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985). Here, Patent Owner had the opportunity to, and in fact did, thoroughly cross examine Mr. McAlexander about the purported deficiencies in his testimony. See, e.g., Exs. 2052, 2054; Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579, 595 (1993) (“Vigorous cross examination [and] presentation of contrary evidence . . . are the traditional and appropriate means of attacking shaky but admissible evidence.”). Therefore, to the extent Patent Owner credibly identifies deficiencies in Mr. McAlexander’s testimony or that testimony lacks factual support or is based on broad, conclusory assertions, we will assign appropriate weight. See Velander v. Garner, 348 F.3d 1359, 1371 (Fed. Cir. 2003) (explaining that it is within the Board’s discretion, as the trier of fact, to accord appropriate weight to the evidence presented).” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner contends that the parties proposed a construction for “pressure valve,” a limitation appearing in claims 18 and 31, during the ITC investigation. Pet. 7 (citing Ex. 1001, 41:58–65). Patent Owner contends that the terms of the ’123 patent should be given their plain and ordinary meaning. PO Resp. 4. Because resolution of the issues presented in this case do not require construction of the term “pressure valve,” we do not expressly construe this claim term. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 14

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. To anticipate a claim, a reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, 545 F.3d at 1369. “The requirement that the prior art elements themselves be arranged as in the claim means that the claims cannot be treated . . . as mere catalogs of separate parts, in disregard of the part-to-part relationships set forth in the claims.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Indeed, the prior art reference “must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference.” Net MoneyIN, 545 F.3d at 1371 (citation omitted). “[D]ifferences between the prior art reference and the claimed invention, however slight, invoke the question of obviousness, not anticipation.” Id.” slip op. at 20

  Patent outcomesUS 10,130,123 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,130,123
• Juul Labs, Inc. v. Njoy, LLCNo claims unpatentable
  PTAB · May 21, 2025 · IPR2024-00160 · APJ Kimberly Mcgraw · IPR · Final written decision

  The Board held claims 1–48 not shown unpatentable on any of six § 103 grounds because the asserted references did not teach the required housing aperture and the proposed combinations lacked adequate support.

  RulingsFinal written decision

  • Skill levelDecided for patent owner

    “time it was made, we consider the level of ordinary skill in the pertinent art at the time of invention. Graham, 383 U.S. at 17. Petitioner does not provide its own definition of the level of ordinary skill in the art. Instead, Petitioner asserts: In previous litigation involving the ’881 patent – the parent patent to the ’864 patent (Fuma International LLC v. R.J. Reynolds Vapor Company, Case No. 1:19-cv-260 (M.D.N.C. 2019)) with an identical specification – Patent Owner’s predecessor-in-interest asserted that a person of ordinary skill in the art (“POSITA”) at the time of the purported invention would have had a mechanical or electrical engineering degree, industrial design degree, or a similar technical degree, or equivalent work experience, and 5 to 10 years of experience in electromechanical devices. Ex. 1007, ¶¶14-17. Pet. 11–12; see also Ex. 1007 ¶ 16 (Mr. Sturges testifying that he meets “that qualification” without affirmatively providing a definition for a POSITA). Before institution, Patent Owner stated it did not challenge this definition (Prelim. Resp. 9), and we adopted Petitioner’s proposed definition in our Decision granting institution. During trial, Patent Owner also adopted this definition. PO Resp. 10–11. Upon a complete record, we see no reason to change and we maintain the agreed upon definition of a POSITA.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Patent Owner argues, and Petitioner does not dispute, that an aperture is a “hole” or an “opening.” See, e.g., id. at 21; see generally Reply. Patent Owner asserts that, in the proper context, the plain and ordinary meaning of a housing having an aperture is that the aperture is a hole, or an opening, on the housing structure itself. Id. at 21–22. We agree. In order for an object to have an “aperture” or an “opening,” the aperture or opening must be on the structure itself and not on a separate object that is located in the structure. This construction is in accord with the Specification of the ’864 patent, which refers to apertures in context of the structure on which they are located. See, e.g., Ex. 1001, 6:12–18 (referring to a first end comprising a first aperture), 7:11–12, 7:65–67 (stating that the wall of an airflow passageway may have apertures).” slip op. at 18

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed patent owner constructionDecided for patent owner

    “large obstructions that force the air flow to near the peripheral surface of the housing, render the passageway non-central. During prosecution of the ’864 patent, the Examiner rejected certain claims (i.e., dependent claims 49, 63, and 75) over Han. To overcome this rejection, the applicant argued that Han cannot meet the limitation “wherein the airflow passageway extends centrally and axially from the first aperture to the second aperture.” Ex. 1002, 273. The applicant explained that Han does not meet this limitation because Han’s shell (b) does not include a central airflow passageway and instead places the perforated component for liquid storage (9) in the middle of shell (b), thereby forcing the airflow around the peripheral surface of the perforated component for liquid storage (9). Id. at 273–274. The examiner relied on this argument in determining that the applicant had overcome an earlier rejection. Id. at 195. Thus, some obstructions of a passageway render the passageway non-central; in particular those obstructions that force air to flow near the peripheral surface of the housing are large enough to render the passageway non-central.” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “lacks motivation and is plagued by improper hindsight.” Sur-reply 15–17. On the record developed during trial, we agree with Patent Owner that Petitioner has not shown by a preponderance of the evidence that a person of ordinary skill in the art would have had a reason to combine the teachings of Xia with those of Wang to arrive at the claimed limitations. Relying on the testimony of Patent Owner’s declarant Dr. Singhose, Petitioner argues that a person of ordinary skill in the art “would have known a central straight path has less airflow resistance than a circuitous one.” Reply 22 (citing Ex. 1035, 127:15–128:9). But the same witness also testified that higher airflow resistance might be desirable and explained that providing more resistance to airflow might result in improved mixing. Ex. 1035, 21:21–22:12, 127:20–24, 170:10–14. In addition, Dr. Singhose testifies that the complicated design of the airflow passageway in Xia “serves important functions,” including “allow[ing] large droplets to be reabsorbed by the liquid-guiding mechanism,” allowing “excessive liquid in the airflow [to] condense,” and “prevent[ing] the chemical liquid from being sucked into the mouth.” Ex. 2022 ¶ 190 (citing Ex. 1004, 11, 13–14, 16). Although Petitioner’s declarant Dr. Sturges testifies that a straight airflow passageway “would provide improved, smoother air flow,” he does not provide any evidence supporting the view that the air flow would be improved. Ex. 1007 ¶ 144. We credit the testimony of Dr. Singhose that using a straight passageway in Xia would have been detrimental rather than beneficial. Ex. 2022 ¶ 190. slip op. at 40

  Patent outcomesUS 11,497,864 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,497,864
• Juul Labs, Inc. v. Njoy, LLCNo claims unpatentable
  PTAB · May 21, 2025 · IPR2024-00161 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–27 were not shown unpatentable because the asserted obviousness grounds failed to establish the claimed central airflow passageway or a reason to combine the references.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Relying on the testimony of Patent Owner’s declarant Dr. Singhose, Petitioner argues that a person of ordinary skill in the art “would have known a central straight path has less airflow resistance than a circuitous one.” Reply 22–23 (citing Ex. 1035, 127:15–128:9). But the same witness also testified that higher airflow resistance might be desirable and explained that providing more resistance to airflow might result in improved mixing. Ex. 1035, 21:21–22:12, 127:20–24, 170:10–14. In addition, Dr. Singhose testifies that the complicated design of the airflow passageway in Xia “serves important functions,” including “allow[ing] large droplets to be reabsorbed by the liquid-guiding mechanism,” allowing “excessive liquid in the airflow [to] condense,” and “prevent[ing] the chemical liquid from being sucked into the mouth.” Ex. 2022 ¶ 183 (citing Ex. 1004, 11, 13–14, 16). Although Petitioner’s declarant Dr. Sturges testifies that a straight airflow passageway “would provide improved, smoother air flow,” he does not provide any evidence supporting the view that the air flow would be improved. Ex. 1007 ¶ 118. We credit the testimony of Dr. Singhose that using a straight passageway in Xia would have been detrimental rather than beneficial. Ex. 2022 ¶ 183. Petitioner also argues that the inventors’ use of a straight path is evidence that the use of a straight passageway was “merely common-sense obviousness.” Reply 22–23. This is hindsight. Otsuka Pharm. Co. v. Sandoz, Inc., 678 F.3d 1280, 1296 (Fed. Cir. 2012) (“The inventor’s own path itself never leads to a conclusion of obviousness; that is hindsight.”). Moreover, it does not address the testimony of Dr. Singhose that the use of a complicated passageway like that in Xia had benefits not present in a straight central passageway.” slip op. at 29

  • Skill levelSkill level petitioner adoptedOther

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had a mechanical or electrical engineering degree, industrial design degree, or a similar technical degree, or equivalent work experience, and 5 to 10 years of experience in electromechanical devices.” Pet. 10 (citing Ex. 1007 ¶ 16). Prior to institution, Patent Owner stated that, for “the limited purpose of this Preliminary Response,” it “does not challenge the definition of a POSITA set forth in the Petition.” Prelim. Resp. 9. We adopted Petitioner’s proposed definition in our Decision granting institution. During trial, neither party disputed this definition. Upon a complete record, we see no reason to change the adopted definition.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Patent Owner argues, however, that this presumption is overcome in the present case, and we agree. PO Resp. 28–32. We note that, although the claims require the first aperture to be “on the first end,” the claims still require that the “housing hav[e] a first aperture.” Thus, the issue is whether the aperture must be on the housing itself or part of the housing, as well as whether the aperture is on the first end of the housing. Although “having” and “includes” are used with respect to the solution holding medium to refer to elements located inside the housing, the specification of the ’881 patent suggests that the ends of the housing are part of the housing itself, rather than located inside the housing. First, “the first end . . . can be integrated into a single assembly as part of the housing.” Ex. 1001, 6:16–17. Second, “the housing . . . may comprise the cylindrical wall and two end-caps,” or “the housing . . . may comprise the cartridge wall and a single end-cap.” Id. at 3:55–59. The only figures of the ’881 patent that depict first end 206 show it at the end of the housing rather than located within the interior of housing 202. Id. at Figs. 2, 3. Moreover, there is no requirement to construe a claim term uniformly across multiple uses in the claims when doing so would be nonsensical. Microprocessor Enhancement Corp. v. Texas Instruments, Inc., 520 F.3d 1367, 1375 (Fed. Cir. 2008). Here, construing a first element that is recited as “having” or “includ[ing]” a second element always as encompassing not only second elements that are part of the first element, but also second elements that are located within the interior of the first element, would lead to nonsensical results. Claim 2 recites an airflow passageway “having a length having a circular cross section.” Ex. 1001, 17:59–60. It would be nonsensical to interpret this claim as encompassing an airflow passageway of non-circular cross section that contains another object that has a circular cross section, and neither party argues in favor of such a reading. Similarly, claim 16 recites an “airflow passageway having an interior having a uniform cross-sectional area,” and there is no reason to interpret this claim as encompassing an airflow passageway of non-uniform cross-sectional area that contains another object that itself has uniform cross-sectional area. Id. at 19:47–48. Thus, the claims do not use “having” or “includes” consistently to refer to elements located within the interior of an object; instead, they sometimes use these terms to refer to elements that are a part of an object. See Epcon Gas Sys., Inc. v. Bauer Compressors, Inc., 279 F.3d 1022, 1030–31 (Fed. Cir. 2002) (terms should be construed based on the context of how the terms are used in the claims).” slip op. at 13

  • Prior constructionPrior construction not adoptedDecided for patent owner

    “When we instituted trial, we preliminarily construed this phrase to encompass apertures that are located within the first end of the housing, determining on the record available at that time that “[t]he term does not require that the first aperture be located in the housing itself.” Inst. Dec. 16. We invited the parties to “address [the] construction of this term during trial,” id., and, on the full record developed during trial, we reach a different conclusion.” slip op. at 10

  Patent outcomesUS 10,334,881 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,334,881
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

    “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

  • ExcludeDenied

    “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

  Patent outcomesUS 8,404,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,404,508
• Commscope Technologies LLC v. Belden, Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-01056 · APJ Kimberly Mcgraw · IPR · Final written decision

  CommScope did not prove claims 1–3, 9–14, and 16–18 unpatentable; the asserted anticipation and obviousness grounds failed on the barrier tape’s conductive material extending to the lateral edges.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “would have had a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in connection with designing, manufacturing, and testing of twisted-pair data cables,” and an “individual with a master’s degree in electrical engineering would require less industry experience (e.g., 1-2 years).” Pet. 15 (citing Ex. 1006 ¶ 12). Prior to institution, Patent Owner’s declarant asserted that a POSITA would have had at least a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in the telecommunications industry and disagreed that industry experience specifically with respect to twisted-pair data cables was necessary to qualify as having ordinary skill in the art. Ex. 2001 ¶ 26 (cited at Prelim. Resp. 22 n.6). Patent Owner stated, however, that any differences between the parties’ proposed definitions “are insubstantial and do not impact the analysis of the issues presented.” Prelim. Resp. 22 n.6. In our Decision on Institution, we adopted Petitioner’s proposal of a person of ordinary skill in the art (POSITA) as someone that “would have had a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in connection with designing, manufacturing, and testing of twisted-pair data cables,” and an “individual with a master’s degree in electrical engineering would require less industry experience (e.g., 1-2 years).” Inst. Dec. 7–8. During the trial, neither party disputed our definition of a POSITA nor argued that the outcome of this case would differ based upon our adoption of any particular definition of a POSITA. See generally Reply; PO Resp. 12 n.4 (agreeing the POSITA definition does not impact analysis of issues presented). Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution.” slip op. at 10

  • Expert testimonyDecided for patent owner

    “Petitioner’s arguments are not persuasive. Mr. Cornelison’s testimony that a POSITA would understand that the tape shown in Figure 13C “has three layers aligned along the side edges” is not credible. See, e.g., Ex. 1006 ¶ 138. Mr. Cornelison’s testimony that Figure 13C is only “intended to identify and illustrate the three different layers of the multi-layer tape,” not to show the relative positions of the layers relative to each other (id. ¶ 137), is belied by his own testimony, in which he states that Figure 13C shows “metallic layer 133 extends to the front edges of dielectric layers 135 and 137 (id. ¶ 136). Additionally, neither Petitioner nor Mr. Cornelison provide persuasive evidence to support the contention that it would take “much more time and be more complex to make all three layers” in Figure 13C offset from each other or that it would be more costly to make than using the customary slitting processes. See Ex. 1006 ¶ 138. Although Mr. Cornelison provides evidence as to how the slitting process can be used to manufacture barrier tape, he does not provide any evidence to support his contention that the proposed slitting processes is in fact less expensive or complex than other methods. See Ex. 1006 ¶ 138. Indeed, Mr. Cornelison does not address the particular methods disclosed in Glew to manufacture the disclosed multi-layer tapes nor persuasively explain why these disclosed methods would be more costly or complex as compared to the “slitting” process. Ex. 1008 ¶¶ 199–201 (stating the multi-layer tapes can be manufactured in a “variety of ways” including bonding the various layers using adhesive or other bonding agents,” mechanically affixing or bonding the layers, needlepunching, thermal bonding, ultrasonic welding, or calendar bonding). We determine that this portion of Mr. Cornelison’s testimony is conclusory and unsupported and is entitled to little weight. Accordingly, Petitioner has not sufficiently shown that Glew discloses conductive material that extends to the lateral edges of the dielectric material as required by claims 1 and 18. As such, Petitioner has not shown a by a preponderance of the evidence that Glew anticipates independent claims 1 or 18 or the challenged claims that depend therefrom.” slip op. at 42

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Thus, although the Specification does not use the term “lateral edge,” the Specification and figures of the ’030 patent make clear, that in the embodiments having a conductive layer that extends to the edges of the dielectric layers of the tape, the referred to “edge” is the edge of the “long side” of the tape that extends in the longitudinal direction. See, e.g., Ex. 1001, 7:49–51 (stating in some embodiments conductive layer 302 may not extend to the edge of tape 110), 8:1–25 (stating, inter alia, pairs 102 could electrically couple to the corresponding edge 306 resulting in increased ANEXT), 8:41–46, 10:30–36 (stating that the tape edge lies over a pair of conducts and the pair generates more ANEXT). Our construction of term “lateral edge” is supported by Roberts, which also refers to the edges of the long side of the tape extending in the longitudinal direction as the “lateral edges.” See, e.g., Ex. 1009, 2:20–24 (“a shield made from a plurality of tapes helically disposed, the lateral edges of which overlap adjacently lying tapes”), 2:42–46 (“a shield composed of a plurality of …, the lateral edges of which overlap adjacently disposed tapes”), 4:27–33 (“the plastic-coated metal foil shield (15) [FIG. 2] has lateral edges that overlap,” “the lateral edges of the shield overlapping one another”), 4:34–40 (“The lateral edges of the helically disposed tapes [of FIG. 3] overlap adjacently lying tapes.”), 5:65-75 (“the shield (15) [of FIG. 10] is made up of a plurality of tapes, the lateral edges of which overlap adjacently disposed like tapes”), Figs. 2, 3, 10. We credit Dr. Eldering’s testimony that these disclosures of Roberts shows that a POSITA would understand that a tape’s “lateral edges” are the edges running along the sides of the tape parallel to the longitudinal direction. See Ex. 2001 ¶¶ 64–65; see also Thales Visionix, Inc. v. United States, 415 F.3d 1335, 1348 (Fed. Cir. 2020) (considering whether the proposed claim construction is “consistent with the prior art’s usage of that term”).” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “contentions set forth in its Petition are insufficient to show that Cook discloses a barrier tape having a conductive material contained between two layers of dielectric material where the conductive material extends to each lateral edge of the two layers of the dielectric material, as required by claims 1 and 18, and further that the conductive material be continuous as required by claim 1. We agree with Patent Owner that Petitioner relies on multiple disparate embodiments of Cook for each of these limitations without sufficiently articulating how a single embodiment satisfies the requirements of claim 1 or 18 or articulating how the disparate embodiments may be combined to arrive at claim 1 or 18. See, e.g., PO Resp. 18–25; Pet. 18–21; see also NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008) (stating in order to establish anticipation, “it is not enough that the prior art reference . . . include multiple, distinct teachings that the artisan might somehow combine to achieve the claimed invention” and that the “reference must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference”).” slip op. at 29

  Patent outcomesUS 9,991,030 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,991,030
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.No claims unpatentable
  PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

  • Expert testimonyPatent owner expert creditedOther

    “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.