- Yealink (USA) Network Technology Co., Ltd. / Yealink Network Technology Co., Ltd. v. Barco NVNo claims unpatentablePTAB · Oct 5, 2026 · IPR2025-00598 · APJ David C Mckone · IPR · Final written decision
Claims 1–31 were not shown unpatentable under either § 103 ground because the asserted combinations did not teach required claim limitations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“admissions by Patent Owner in litigation, contends that a person of ordinary skill in the art would have had “a Master of Science (M.S.) degree in electrical engineering or computer science, and five years of work experience in a related field” and that “[a]dditional educational experience could substitute for some of the work experience.” Pet. 5 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art (Petition, 5) at this time.” PO Resp. 6. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is uncontested and is consistent with the technology described in the ’347 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In the Preliminary Response, “Patent Owner accept[ed] the Petition’s claim construction.” Prelim. Resp. 6. However, in the Patent Owner Response, Patent Owner argues that “the claims of the ’347 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Based on the complete record, we do not find it necessary to provide express claim constructions of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Beel actually discloses the following: [0321] On the peripheral device 32 the video packets are received at the corresponding plug and play port, e.g. the USB port 11, read by the Human Interface Driver (HID) interface handler 13, unpacked to remove HID protocol headers in an unpacker 20 and then transmitted to the communications network by a transmitter 21. The network can be wireless for example WiFi or LiFi network. [0322] Having been routed over a communications network to the base unit 33, the incoming stream is read from the communications interface such as a WiFi access point 22, unpacked in an unpacker 25, decoded in a decoder 26 and then inserted into a suitable composition such as an OpenGL based composition in the compositor 29 for display on a central display device. Ex. 1005 ¶¶ 321–322 (emphasis added to portions quoted by Petitioner). Patent Owner notes that “[t]he Petition mistakenly cites to ¶ 322 of Beel but quotes ¶ 321.” PO Resp. 20 n.3. However, it appears that Petitioner has grafted together a portion of paragraph 321 that introduces peripheral device 32 with a portion of paragraph 322, which discusses features of base unit 33. However, this grafting has been done in such a way as to convey (incorrectly) that peripheral device 32, not base unit 33, includes unpacker 25, decoder 26, and compositor 29 that process the first processed video data received by the first peripheral device to generate second video data. Dr. Almeroth’s testimony, which copies Petitioner’s incorrectly altered quotation to paragraph 322 of Beel, is unreliable as to this claim limitation and is entitled to no weight.4 Thus, Petitioner has no expert testimony on which to rely for this claim limitation.” slip op. at 19
- Strike new argumentNew argument disregardedDecided for patent owner
“5 At the oral argument, when challenged on its reliance on paragraph 322, Petitioner argued that paragraph 321 of Beel teaches this limitation. Tr. 22:26–23:24. Petitioner did not make this argument in the Petition and, instead, raised it for the first time during oral argument; thus, it will not be considered. See Dell Inc. v. Acceleron, LLC, 884 F.3d 1364, 1369 (Fed. Cir. 2018) (“Unless it chose to exercise its waiver authority under 37 C.F.R. § 42.5(b), the Board was obligated to dismiss Dell’s untimely argument given that the untimely argument in this case was raised for the first time during oral argument.”). Even if we were to consider this new argument, it would not be persuasive. As Patent Owner observes (PO Resp. 20), any processing performed by peripheral device 32 in paragraph 321 is on data received from the processing device and destined for the base station via the network, rather than data flowing in the direction of the first processed video data of claim 1.” slip op. at 22
Patent outcomesUS 11,966,347 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,966,347 - Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco Limited And Willow Innovations, Inc.All claims unpatentablePTAB · Sep 25, 2026 · IPR2025-00554 · APJ Barry L Grossman · IPR · Final written decision
Claims 17–19 and 21–33 are unpatentable as obvious under each asserted § 103 ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Factors pertinent to a determination of the level of ordinary skill in the art include: (1) educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of workers active in the field. Env’t Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–697 (Fed. Cir. 1983) (citing Orthopedic Equip. Co. v. All Orthopedic Appliances, Inc., 707 F.2d 1376, 1381–82 (Fed. Cir. 1983)). Not all such factors may be present in every case, and one or more of these or other factors may predominate in a particular case. Id. Moreover, these factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). In determining a level of ordinary skill, we also may look to the prior art, which may reflect an appropriate skill level. Okajima, 261 F.3d at 1355.” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“according to the Phillips standard,” and that “no formal claim constructions are necessary for purposes of resolving controversies in this proceeding. Pet. 3. We agree. Given the lack of dispute on this record, we do not perceive the need to construe any claim limitation. Claims must be construed “only to the extent necessary to resolve the controversy.” AstraZeneca AB v. Mylan Pharms. Inc., 19 F.4th 1325, 1345 (Fed. Cir. 2021) (quoting Vivid Techs., Inc. v. American Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe the claim preambles here where the construction is not ‘material to the [obviousness] dispute.’” (citations omitted)).” slip op. at 18
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We find Mr. Bauer’s testimonial evidence persuasive and undisputed as to why a person of ordinary skill, a degreed engineer with two years of experience designing human breast pump equipment, would modify Furrer to use a battery as a power source, and have a reasonable degree of confidence that it would work successfully.” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We find Mr. Bauer’s testimonial evidence persuasive and undisputed as to why a person of ordinary skill, a degreed engineer with two years of experience designing human breast pump equipment, would modify Furrer to use a battery as a power source, and have a reasonable degree of confidence that it would work successfully. Concerning the proposed combination of Furrer and Alvarez, Mr. Bauer testifies why a person of ordinary skill would combine Furrer and Alvarez, explaining that: a POSITA6 would have turned to the teachings of Alvarez to implement Furrer’s vacuum pump using a conventional pump controller having a portable, battery-powered pump to not only increase portability and to allow the user to move about when using the device but also to provide improved control for the system. Ex. 1003 ¶ 138. Mr. Bauer also testifies: a POSITA would have recognized that Alvarez advantageously provides details for such a conventional vacuum pump suitable for safely and controllably delivering negative pressure using a “[c]ontroller 115 [that] “houses the power source and drive mechanism for pumping device 100, and also contains hardware for various functions, such as controlling pumping device 100, milk production quantification, and communication with other devices. 6 “POSITA” is a patent law acronym for a “person of ordinary skill in the art.” Id. ¶ 139 (citing Ex. 1005 ¶ 69). Mr. Bauer further explains that Alvarez discloses that a “pump unit2100 [disclosed in Alvarez] preferably include[es] a controller and processor 2104 as well as a motor 2102 for actuating the device.” Id. (citing Ex. 1005 ¶ 115); see also id. ¶¶ 140–142 (providing “second,” “third,” and “fourth” reasons why a person of ordinary skill would have been motivated to combine Furrer and Alvarez). Mr. Bauer concludes from his analysis that “a person skilled in the art” slip op. at 26
Patent outcomesUS 11,806,454 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,806,454 - Apple Inc. v. Proxense, LLCAll claims unpatentablePTAB · Sep 17, 2026 · IPR2025-00562 · APJ Thu A Dang · IPR · Final written decision
Claims 1–20 are unpatentable as obvious over Giobbi ’157, Giobbi ’139, and Dua; the Board also finds the claims unpatentable under the Broadcom grounds.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) does not applyDecided for petitioner
“IPR2024-00783, Ex. 1001, 22:36–49. As the Federal Circuit stated, when a disputed claim limitation does not employ “means for” language, the presumption is that each of the terms conveys sufficiently definite structure or act and, thus, is not subject to § 112 ¶ 6. See Dyfan, 28 F.4th at 1367. Based on the record before us, this presumption that each of the terms is not subject to § 112 ¶ 6 is not overcome.” slip op. at 17
- Skill levelOther
“differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of non-obviousness. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966).” slip op. at 25
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We find persuasive Dr. Wolfe’s supporting testimony that a POSITA would have understood the terms “PDK” and “RDC” to have “definite structure.” Ex. 1013 ¶¶ 35–56. In particular, we find persuasive Dr. Wolfe’s testimony that the term “PDK,” for example, “encompasses at least ‘a collection of circuit components that includes an antenna, a transceiver, and a controller and memory for storing information particular to a user.’” Id. ¶ 35. Dr. Wolfe’s testimony is consistent with the Specification of the ’188 patent. See Ex. 1001, 5:42–6:7, 3:48–62. In particular, the Specification of the ’188 patent describes a microchip that stores information in memory and responds through an antenna when probed, which is consistent with Dr. Wolfe’s testimony. Id.; Ex. 1001, 1:30–62.” slip op. at 19
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of non-obviousness. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966).” slip op. at 25
Patent outcomesUS 9,049,188 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,049,188 - Shenzhen Root Technology Co., Ltd. v. Willow Blossom Holdco LimitedAll claims unpatentablePTAB · Jul 30, 2026 · IPR2025-00560 · APJ Barry L Grossman · IPR · Final written decision
Claims 1–29 are unpatentable under each asserted obviousness ground, including Chang and Fang, because Petitioner proved unpatentability by a preponderance of the evidence.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedDecided for petitioner
“Additionally, we note that Patent Owner did not cross-examine Mr. Ryan Bauer, who provided a detailed, 169-page expert report providing, on behalf of Petitioner, his opinions about the issues in this proceeding. See Exhibit 1003. Mr. Bauer’s testimonial evidence in this proceeding remains unrebutted.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art would have had “bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment. More education could substitute for experience and vice versa.” Pet. 8 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s Declaration testimony states he considered some of the factors listed above. Ex. 1003 ¶ 17. Mr. Bauer testifies that based on his background and experience, in his opinion, the level of ordinary skill is as stated by Petitioner. Id. at 18. Based on the prior art, the sophistication of the disclosed technology in the ’381 patent, and Mr. Bauer’s undisputed testimony, we adopt Petitioner’s definition of the level of ordinary skill.” slip op. at 17
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that the Examiner construed the term “self- contained, in-bra wearable device” to mean “complete, or having all that is needed, in itself’ and is capable of being worn in a bra.” Pet. 8 (citing Ex. 1005, 2290).14 According to Petitioner, “[Patent Owner] did not dispute this construction, and Petitioner applies it herein.” Id. Petitioner contends that all other terms “should receive their plain and ordinary meaning.” Id. We do not perceive the need to construe any claim limitation. Claims must be construed “only to the extent necessary to resolve the controversy.” AstraZeneca AB v. Mylan Pharms. Inc., 19 F.4th 1325, 1345 (Fed. Cir. 2021) (quoting Vivid Techs., Inc. v. American Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe the claim preambles here where the construction is not ‘material to the [obviousness] dispute.’” (citations omitted)).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“(3) 1[a][1] a diaphragm configured to prevent milk from reaching an air pump by forming a seal around its outer edge; Petitioner relies on Fang for the disclosure of a diaphragm, as stated in this clause. Pet. 25–26. Petitioner asserts the proposed combination of elements suggest a breast pump device that would have used a diaphragm pump including first and second diaphragm housing components and an elastic diaphragm, “in accordance with Fang’s suggestions.” Id. at 25. As also asserted by Petitioner, Fang discloses that flexible diaphragm 7 (i.e., a membrane) is configured to prevent milk from reaching the pump. Id. at 26 (citing Ex. 1009 ¶ 19 (“The elastic diaphragm 7 is used to prevent milk from flowing into the air pump main unit 8.”). Mr. Bauer testifies: The flexible diaphragm [diaphragm 7 in Fang] forms a watertight and airtight seal around its outer edge. In doing so, the diaphragm prevents the passage of milk from reaching the air pump and facilitates generation of negative pressure during operation. Fang also explains that the elastic diaphragm 7 deforms away from the nipple tunnel when a vacuum is created on a pumping chamber, which then creates negative air pressure in the nipple tunnel when a vacuum is created on a pumping chamber.” slip op. at 28
Patent outcomesUS 11,813,381 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,813,381 - Yealink (USA) Network Technology Co. Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentablePTAB · Jul 28, 2026 · IPR2025-00491 · APJ Frederick C Laney · IPR · Final written decision
Claims 1–18 are unpatentable as obvious over Beel and Dinka, with or without Christison; the Kaplan, Van de Laar, and Christison ground fails for lack of motivation to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 9–10 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art.” PO Resp. 6. On the complete record, we adopt Petitioner’s proposed definition of a person of ordinary skill in the pertinent art, as it is consistent with the ’972 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededPlain and ordinary meaningDecided for patent owner
“Rather than addressing Petitioner’s proposals, Patent Owner states “the claims of the ’972 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Our decision in this matter does not turn on resolving any particular differences between the parties’ constructions. Therefore, because only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy, we determine that no claim term requires express construction in this proceeding and that the ordinary and customary meaning of the claim terms apply. See Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019).” slip op. at 11
- Expert testimonyPatent owner expert discountedDecided for petitioner
“device. The ’972 patent expressly defines endpoints broadly “as data sources or sinks.” Ex. 1001, 7:64–67. And the ’972 patent admits that Beel’s Figure 11 discloses the same endpoints depicted in the ’972 patent’s own Figure 4. Id. at 4:28–33, 16:44–67. Beel’s Figure 11 and accompanying description disclose a “[m]ass storage device 12,” a “USB audio device 14,” and a “USB HID device 13” on the peripheral device. Ex. 1005, Fig. 11, ¶¶ 320–323. Patent Owner’s own declarant conceded that a mass storage device is “a type of endpoint” (Ex. 1034, 43:19–21), and that “audio devices are endpoints” (id. at 57:5–61:4). We give reduced weight to Patent Owner’s contrary position to the extent it rests on the premise that a reference cannot disclose an endpoint unless it uses the word “endpoint” (Ex. 2030 ¶ 94; Ex. 1034, 43:19–44:16, 72:18–73:12); a premise that is inconsistent with the ’972 patent’s own broad definition and with the ’972 patent’s admission regarding Beel’s Figure 11. As additional support not separately emphasized by the parties in this connection, we note Dr. Almeroth’s technical explanation that, for data to pass from a functional device to a peripheral device, “both the functional device and the peripheral device must have ‘endpoints’”—a data source and a data sink—reasoning consistent with the ’972 patent’s definition. Ex. 1002 ¶ 125.” slip op. at 27
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“First, we agree with Patent Owner that, under the ordinary meaning of the claim language, the endpoint is an endpoint of the peripheral device, and that it must be “a data source or a data sink which is able to store or emit data, of the functional device exposed or made available on the first peripheral device.” Ex. 1001, 23:11–17. The limitation thus identifies a structure—an endpoint, residing on the peripheral device, that is a source or sink and that corresponds to (is “of”) the functional device—through which the communication recited in subsequent element (g) is carried out. By its terms, it imposes no requirement as to the direction in which data flows; it requires only that the endpoint be a data “source” or a data “sink” that is able to “store or emit” data. The operative transmit-and-receive communication “from the functional device to the processing device via the . . . endpoint” is recited in subsequent element (g), which we take up separately below. The disputed question under this limitation is therefore the structural one: whether Beel discloses, on the peripheral device, an endpoint that is “of the functional device.” Because the inquiry is structural and non-directional, we are not persuaded that the audio-out orientation of Beel’s described embodiment, on which Patent Owner relies, is dispositive of this limitation. device. The ’972 patent expressly defines endpoints broadly “as data sources or sinks.” Ex. 1001, 7:64–67. And the ’972 patent admits that Beel’s Figure 11 discloses the same endpoints depicted in the ’972 patent’s own Figure 4. Id. at 4:28–33, 16:44–67. Beel’s Figure 11 and accompanying description disclose a “[m]ass storage device 12,” a “USB audio device 14,” and a “USB HID device 13” on the peripheral device. Ex. 1005, Fig. 11, ¶¶ 320–323. Patent Owner’s own declarant conceded that a mass storage device is “a type of endpoint” (Ex. 1034, 43:19–21), and that “audio devices are endpoints” (id. at 57:5–61:4). We give reduced weight to Patent Owner’s contrary position to the extent it rests on the premise that a reference cannot disclose an endpoint unless it uses the word “endpoint” (Ex. 2030 ¶ 94; Ex. 1034, 43:19–44:16, 72:18–73:12); a premise that is inconsistent with the ’972 patent’s own broad definition and with the ’972 patent’s admission regarding Beel’s Figure 11. As additional support not separately emphasized by the parties in this connection, we note Dr. Almeroth’s technical explanation that, for data to pass from a functional device to a peripheral device, “both the functional device and the peripheral device must have ‘endpoints’”—a data source and a data sink—reasoning consistent with the ’972 patent’s definition. Ex. 1002 ¶ 125. Third, we find that the endpoint Beel discloses is a data source or a data sink that is “able to store or emit data, of the functional device.” We begin with the words of the limitation. The endpoint need only be “able to store or emit data”—language of capability, not a requirement that particular data actually traverse the endpoint in operation, and still less in a particular direction. And the endpoint is defined by the character of the data it handles: it is “a data source or a data sink,” which the ’972 patent instructs An audio endpoint, so understood, is characterized as an audio source or sink; its structure is not tied to any single instance of an audio device. On that understanding, Beel’s disclosure establishes the required capability directly. Beel discloses that “audio data is captured through a virtual sound card interface added as a logical device over the physical interface provided in the peripheral device,” Ex. 1005 ¶ 43, that the peripheral device “acts as a composite device comprising for instance a (virtual) audio speaker device,” id. ¶ 317, and that “audio data is captured at this interface . . . internally in the peripheral device 32” and streamed over the communications network, id. ¶ 319. Beel thus shows the endpoint on the peripheral device actually storing and emitting audio—and, correspondingly, video—data, which is the very type of data produced and consumed by the audio/visual functional devices connected to the base unit, including the microphones, cameras, speakers, and displays. Id. ¶ 120. An endpoint shown to store or emit audio and video data is necessarily one that is “able to store or emit” such data; the capability the limitation requires is thus established by Beel’s disclosure.” slip op. at 26
Patent outcomesUS 10,684,972 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,684,972 - Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentablePTAB · Jul 27, 2026 · IPR2025-00565 · APJ Michael R Zecher · IPR · Final written decision
Claims 1–5 are unpatentable because Amazon showed they are anticipated by Shin; the Board did not reach Amazon’s contingent obviousness ground over Shin.
RulingsFinal written decision- BurdenOther
“Written Decision under 35 U.S.C. § 318(a) as to the patentability of claims 1–5 of the ’337 patent. For the reasons we identify below, we hold that Amazon has demonstrated by a preponderance of the evidence that these claims are unpatentable.” slip op. at 2
- Skill levelOther
“2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed
“1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17
Patent outcomesUS 11,069,337 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,069,337 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Expert testimonyPatent owner expert creditedDecided for patent owner
“gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00186 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board found the combination disclosed the claimed isolation portion and supported the challenged claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id. Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed
“edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.