- Juul Labs, Inc. v. Njoy, LLCNo claims unpatentablePTAB · May 21, 2025 · IPR2024-00161 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 1–27 were not shown unpatentable because the asserted obviousness grounds failed to establish the claimed central airflow passageway or a reason to combine the references.
RulingsFinal written decision- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Relying on the testimony of Patent Owner’s declarant Dr. Singhose, Petitioner argues that a person of ordinary skill in the art “would have known a central straight path has less airflow resistance than a circuitous one.” Reply 22–23 (citing Ex. 1035, 127:15–128:9). But the same witness also testified that higher airflow resistance might be desirable and explained that providing more resistance to airflow might result in improved mixing. Ex. 1035, 21:21–22:12, 127:20–24, 170:10–14. In addition, Dr. Singhose testifies that the complicated design of the airflow passageway in Xia “serves important functions,” including “allow[ing] large droplets to be reabsorbed by the liquid-guiding mechanism,” allowing “excessive liquid in the airflow [to] condense,” and “prevent[ing] the chemical liquid from being sucked into the mouth.” Ex. 2022 ¶ 183 (citing Ex. 1004, 11, 13–14, 16). Although Petitioner’s declarant Dr. Sturges testifies that a straight airflow passageway “would provide improved, smoother air flow,” he does not provide any evidence supporting the view that the air flow would be improved. Ex. 1007 ¶ 118. We credit the testimony of Dr. Singhose that using a straight passageway in Xia would have been detrimental rather than beneficial. Ex. 2022 ¶ 183. Petitioner also argues that the inventors’ use of a straight path is evidence that the use of a straight passageway was “merely common-sense obviousness.” Reply 22–23. This is hindsight. Otsuka Pharm. Co. v. Sandoz, Inc., 678 F.3d 1280, 1296 (Fed. Cir. 2012) (“The inventor’s own path itself never leads to a conclusion of obviousness; that is hindsight.”). Moreover, it does not address the testimony of Dr. Singhose that the use of a complicated passageway like that in Xia had benefits not present in a straight central passageway.” slip op. at 29
- Skill levelSkill level petitioner adoptedOther
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had a mechanical or electrical engineering degree, industrial design degree, or a similar technical degree, or equivalent work experience, and 5 to 10 years of experience in electromechanical devices.” Pet. 10 (citing Ex. 1007 ¶ 16). Prior to institution, Patent Owner stated that, for “the limited purpose of this Preliminary Response,” it “does not challenge the definition of a POSITA set forth in the Petition.” Prelim. Resp. 9. We adopted Petitioner’s proposed definition in our Decision granting institution. During trial, neither party disputed this definition. Upon a complete record, we see no reason to change the adopted definition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Patent Owner argues, however, that this presumption is overcome in the present case, and we agree. PO Resp. 28–32. We note that, although the claims require the first aperture to be “on the first end,” the claims still require that the “housing hav[e] a first aperture.” Thus, the issue is whether the aperture must be on the housing itself or part of the housing, as well as whether the aperture is on the first end of the housing. Although “having” and “includes” are used with respect to the solution holding medium to refer to elements located inside the housing, the specification of the ’881 patent suggests that the ends of the housing are part of the housing itself, rather than located inside the housing. First, “the first end . . . can be integrated into a single assembly as part of the housing.” Ex. 1001, 6:16–17. Second, “the housing . . . may comprise the cylindrical wall and two end-caps,” or “the housing . . . may comprise the cartridge wall and a single end-cap.” Id. at 3:55–59. The only figures of the ’881 patent that depict first end 206 show it at the end of the housing rather than located within the interior of housing 202. Id. at Figs. 2, 3. Moreover, there is no requirement to construe a claim term uniformly across multiple uses in the claims when doing so would be nonsensical. Microprocessor Enhancement Corp. v. Texas Instruments, Inc., 520 F.3d 1367, 1375 (Fed. Cir. 2008). Here, construing a first element that is recited as “having” or “includ[ing]” a second element always as encompassing not only second elements that are part of the first element, but also second elements that are located within the interior of the first element, would lead to nonsensical results. Claim 2 recites an airflow passageway “having a length having a circular cross section.” Ex. 1001, 17:59–60. It would be nonsensical to interpret this claim as encompassing an airflow passageway of non-circular cross section that contains another object that has a circular cross section, and neither party argues in favor of such a reading. Similarly, claim 16 recites an “airflow passageway having an interior having a uniform cross-sectional area,” and there is no reason to interpret this claim as encompassing an airflow passageway of non-uniform cross-sectional area that contains another object that itself has uniform cross-sectional area. Id. at 19:47–48. Thus, the claims do not use “having” or “includes” consistently to refer to elements located within the interior of an object; instead, they sometimes use these terms to refer to elements that are a part of an object. See Epcon Gas Sys., Inc. v. Bauer Compressors, Inc., 279 F.3d 1022, 1030–31 (Fed. Cir. 2002) (terms should be construed based on the context of how the terms are used in the claims).” slip op. at 13
- Prior constructionPrior construction not adoptedDecided for patent owner
“When we instituted trial, we preliminarily construed this phrase to encompass apertures that are located within the first end of the housing, determining on the record available at that time that “[t]he term does not require that the first aperture be located in the housing itself.” Inst. Dec. 16. We invited the parties to “address [the] construction of this term during trial,” id., and, on the full record developed during trial, we reach a different conclusion.” slip op. at 10
Patent outcomesUS 10,334,881 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,334,881 - PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution
The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38
- Skill levelSkill level petitioner adoptedDecided for petitioner
“At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,591,706 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision
Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.
RulingsFinal written decision- Skill levelOther
“In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31
Patent outcomesUS 10,312,335 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,312,335 - PTAB · Mar 20, 2025 · IPR2024-01406 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted IPR on claims 1, 3, 4, 8–13, and 15 on all asserted grounds, finding a reasonable likelihood that Takeuchi anticipates those claims.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’202 patent. Accordingly, we institute an inter partes review of claims 1, 3, 4, 8–13, and 15 of the ’202 patent. A. Real Parties in Interest” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“or “POSITA”) would have had “a bachelor’s degree in mechanical engineering, electrical engineering, or a related field, and three to four years of experience, or a master’s degree in mechanical engineering, electrical engineering, or a related field, and one to two years of experience.” Pet. 6 (citing Ex. 1003 ¶ 13). Petitioner further contends that “[s]uch experience would include a familiarity with thermal fluid delivery devices and/or the components and underlying technology used therein, and a higher level of 1 US 5,249,586, issued Oct. 5, 1993 (Ex. 1004, “Morgan”). 2 EP 0 845 220 B1, published Jan. 26, 1998 (Ex. 1006, “Susa”). 3 US 2005/0205084 A1, published Sept. 22, 2005 (Ex. 1007, “Gupta”). 4 US 6,155,268, issued Dec. 5, 2000 (Ex. 1009, “Takeuchi”). at 6–7 (citing Ex. 1003 ¶ 13). Patent Owner states that, for purposes of the Preliminary Response, “Patent Owner maintains that Petitioners’ arguments fail even under Petitioners’ POSA definition.” Prelim. Resp. 13. On this record, we preliminarily adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’202 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). B. Claim Construction” slip op. at 6
- Prior constructionPrior construction adoptedDecided for petitioner
“term “wicked into contact” that the Board adopted in a prior inter partes review proceeding that addressed the same term in an earlier, related patent. Pet. 7 (citing IPR2020-01602, Paper 32 at 8–15 (PTAB March 30, 2022)). ‘wicked into contact’ to mean: ‘wicked into contact (1) with the heater, or (2) with an area in close proximity to, and exposed [to] the heat produced by, the heater,’” and “[t]he present Petition adopts this formal construction for purposes of this IPR proceeding.” Id. (citing IPR2020-01602, Paper 32 at 15). Patent Owner also “adopts this construction for purposes of” the Preliminary Response, and argues that “Petitioner’s grounds fail even under its proposed construction of ‘wicked into contact.’” Prelim. Resp. 13. For purposes of this Decision, we adopt the Board’s prior construction of “wicked into contact,” namely, “wicked into contact (1) with the heater, or (2) with an area in close proximity to, and exposed to the heat produced by, the heater,” which is undisputed on this record. See Philip Morris Products, S.A. v. RAI Strategic Holdings, Inc., IPR2020-01602, Paper 32 at 8–15 (PTAB March 30, 2022). C. Asserted Anticipation by Morgan” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot reached
“To establish anticipation, each and every element in a claim, arranged as recited in the claim, must be found in a single prior art reference. Net Karsten Mfg. Corp. v. Cleveland Golf Co., 242 F.3d 1376, 1383 (Fed. Cir. 2001). “A reference may anticipate inherently if a claim limitation that is not expressly disclosed is ‘necessarily present, or inherent, in the single anticipating reference.’” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012) (quoting Verizon Servs. Corp. v. Fibernet Va., Inc., 602 F.3d 1325, 1336–37 (Fed. Cir. 2010)). Based on the current record, we are not persuaded that Petitioner sufficiently establishes that Morgan discloses “a storage compartment . . . being arranged such that the liquid aerosol-forming material can be wicked into contact with the electrical resistance heater to volatilize the liquid aerosol-forming material” as recited in claim 1.” slip op. at 12
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 11,925,202 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision
Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.
RulingsFinal written decision- Expert testimonyPatent owner expert creditedDecided for patent owner
“We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached
“During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13
- ExcludeDenied
“III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47
Patent outcomesUS 8,404,508 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,404,508 - Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - Billerud Aktiebolag (Publ) v. Westrock MWV, LLCSome claims unpatentablePTAB · Mar 12, 2025 · IPR2023-01206 · APJ Elizabeth M Roesel · IPR · Final written decision
Claims 1, 2, and 4–22 are unpatentable as obvious; claim 23 was not shown unpatentable. Substitute claims 25–26 are allowed, while 24 and 27 are denied for lack of written-description support.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedOther
“Exhibits 1013 and 1014 are also not admissible as expert testimony because Mr. Wirén is not “qualified as an expert by knowledge, skill, experience, training, or education.” Fed. R. Evid. 703. “To offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). Mr. Wirén does not meet our definition of a person of ordinary skill in the art. See Section II.B, supra. That definition is based on the undisputed testimony of Messrs. Zotterman and Klass. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. Although Mr. Wirén has a Master’s of Science in chemical engineering, he lacks any experience or specialization in paperboard manufacturing. Ex. 2011, 12:1–10, 19:6–25, 20:2–7. We therefore agree with Patent Owner that Exhibits 1013 and 1014 are the testimony of Mr. Wirén and should be excluded from evidence because Mr. Wirén is not a person of ordinary skill in the relevant art. PO MTE 5–6, 9; Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362 (Fed. Cir. 2008) (“Unless a patent lawyer is also a qualified technical” slip op. at 61
- Skill levelSkill level board ownOther
“Level of Ordinary Skill in the Art Based on the testimony of the parties’ witnesses, we determine that a person of ordinary skill in the art would have had a bachelor’s degree in paper science and engineering, chemical engineering, process engineering, mechanical engineering, or a related degree, with three to five years of experience in paperboard manufacturing, or a master’s degree in paper science and engineering, chemical engineering, process engineering, or mechanical engineering, or a similar field with a specialization in paperboard manufacturing. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’142 Patent Specification and the asserted prior art references.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDecided for petitioner
“A claim construction that excludes a particular element is viewed as a “negative limitation.” Ethicon LLC v. Intuitive Surgical, Inc., 847 Fed. App’x 901, 907 (Fed. Cir. Mar. 15, 2021). “[S]uch exclusions must find support either in ‘the words of the claim’ or through an ‘express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.’” Id. (citing Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002)). “The standards for finding lexicography and disavowal are exacting.” GE Lighting Sols., LLC v. AgiLight, Inc., 750 F.3d 1304, 1309 (Fed. Cir. 2014). “To act as its own lexicographer, a patentee must ‘clearly set forth a definition of the disputed claim term,’ and ‘clearly express an intent to define the term.’” Id. (citing Thorner, 669 F.3d at 1365). Similarly, disclaimer or disavowal requires that the specification or prosecution history demonstrate that the invention does not include a particular feature. Id. Here, we find no claim language, lexicography, or disclaimer in the ’142 Patent or its file history that would support defining a “hot-hard calender” as requiring that only one of the two rollers be heated to an elevated temperature.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“a contact surface of said thermo-roller is heated to an elevated temperature of at least 250°F.” Petitioner shows persuasively that the temperature limitation is taught by the combination of Fugitt and Papermaking. Pet. 32–34. Fugitt discloses that “[t]he rolls of the calender may be steam heated.” Ex. 1004 ¶ 26. In a section titled “Heated Rolls,” Papermaking discloses that “Steam can be used up to 170°C [338°F] surface temperature.” Ex. 1010, 95, 98. Petitioner is thus correct that, “[w]hile Fugitt teaches that a hot calender may be steam heated, Papermaking clarifies that one of ordinary skill in the art would understand that steam heated thermo-rollers may reach up to 338°F.” Pet. 36. Based on these disclosures, we are persuaded by Mr. Zotterman’s testimony that it would have been “obvious to heat the thermo-roller of Fugitt to at least 250°F.” Ex. 1003 ¶ 159. combine Fugitt and Papermaking because of Papermaking’s status as a “trusted handbook[],” because both references disclose a method of manufacturing a paperboard structure with hot calendering,” and “because of the known advantages of heated rollers.” Pet. 36–37; Ex. 1003 ¶¶ 157, 159, 162. Petitioner’s contention is supported by Papermaking’s disclosures that, for cartonboard, “[p]recalendering is used before the coater to reduce roughness and porosity” and “[h]igh thermo roll temperatures (in some cases over 200°C) result in bulk savings because of the temperature gradient.” Ex. 1005, 80–82; see also Pet. 38; Ex. 1003 ¶ 164 (citing these disclosures). Papermaking’s disclosed range of “up to 170°C [338°F]” for steam- heated rolls (Ex. 1010, 98), overlaps the claimed range of “at least 250°F.” Patent Owner agrees. Tr. 27:11–13. “If the relevant comparison between a disputed claim limitation and the prior art pertains to a range of overlapping values, ‘. . . even a slight overlap in range establishes a prima facie case of obviousness.’” Genentech, Inc. v. Hospira, Inc., 946 F.3d 1333, 1341 (Fed. Cir. 2020) (citing In re Peterson, 315 F.3d 1325, 1329 (Fed. Cir. 2003)). “[S]uch an overlap creates a presumption of obviousness, and . . . the burden of production falls upon the patentee to come forward with pertinent evidence that the overlapping range would not have been obvious in light of the prior art.” Id. (citing E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1006, 1008 (Fed. Cir. 2018)). slip op. at 21
Patent outcomesUS 11,293,142 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,293,142 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - PTAB · Feb 27, 2025 · IPR2024-01228 · APJ Kimberly Mcgraw · IPR · Institution
The Board instituted IPR on all challenged claims and all asserted grounds after finding a reasonable likelihood that claim 1 is unpatentable over Fukui.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“c) Conclusion Petitioner shows a reasonable likelihood that it would prevail in showing that claim 1 is unpatentable over Fukui. Accordingly, we institute inter partes review of all challenged calms based on all grounds asserted in the Petition. See SAS, 138 S.Ct. at 1354.” slip op. at 25
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“III. DISCRETION TO DENY INSTITUTION UNDER 35 U.S.C. § 325(d) Patent Owner argues that if the Board determines that Petitioner’s Fukui-based grounds 1 and 2 are deficient, then the Board should deny institution under § 325(d). Prelim. Resp. 26. In particular, Patent Owner asserts that remaining grounds 3 through 5 rely on art (i.e., Sauter) a reference that is substantially similar to art that was before the Examiner (i.e., Sedor). Id. at 26–27. Because we do not determine that Fukui-based grounds are deficient, we decline to exercise our discretion to deny institution under § 325(d).” slip op. at 31
- Skill levelSkill level petitioner adoptedDecided for petitioner
“time it was made, we consider the level of ordinary skill in the pertinent art at the time of the invention. Graham, 383 U.S. at 17. Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems.” Pet. 26. (citing Ex. 1003 ¶¶ 19–21). At this stage of the proceeding, Patent Owner neither responds to Petitioner’s proposed definition, nor provides a definition of its own. See Prelim. Resp. Petitioner’s undisputed proposed definition appears to be consistent with the cited prior art and the disclosure of the ’422 patent, and we adopt it for purposes of this Decision.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed petitioner constructionDecided for petitioner
“Based on the present record, we agree with Petitioner that Patent Owner’s statements during prosecution are relevant to claim construction. Pet. 24–25. During prosecution of the parent application to the ’422 patent, Patent Owner stated, inter alia, that “a person of ordinary skill in the art would understand that the width of a cassette is simply the width of the cassettes from side to side and not some other ‘dimension’ such as the number of receptables or the like.” Ex. 1002, 187. Patent Owner further stated that it disagreed with the Examiner’s statement that paragraph 15 of the specification6 defines width in terms of the number of receptacles and that such a definition of width makes no sense in view of other claims where the standard with is defined in terms of a width of front edge of a tray on which the cassettes are secured. Id. We note that at this stage of the proceeding, Patent Owner has not provided any argument or evidence opposing Petitioner’s proposed construction or supporting the claim construction that it proposed during the district litigation. Our construction is preliminary and the parties are invited to address this claim construction more fully during trial.” slip op. at 13
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,656,422
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.