- Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision
The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.
RulingsFinal written decision- Skill levelSkill level board ownOther
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable
“We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34
Patent outcomesUS 11,188,124 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,188,124 - Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision
Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17
- Expert testimonyPetitioner expert discountedDecided for patent owner
“modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18
Patent outcomesUS 8,460,385 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,460,385 - Meta Platforms, Inc. v. Sitnet LLCInstitution deniedPTAB · Jul 2, 2026 · IPR2026-00112 · APJ John A Squires · IPR · Director review
Institution was denied for claims 1–12 because the petition did not show that the cited search results taught the claimed “data feed.”
RulingsDirector review decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Although Petitioner asserts that the ’463 patent “does not limit the form of a data feed,” Petitioner does not explain what the ordinary and customary meaning of “data feed” was at the time of the claimed invention or otherwise propose an express construction of “data feed.” Pet. 6–7, 23. Nor does Petitioner point to any prosecution history that bears on the meaning of “data feed.” Id.; see 37 C.F.R. § 42.100. Accordingly, Petitioner does not provide sufficient evidence showing that Kraft’s or Wong’s disclosure of search results in response to a user-entered search query teaches a “data feed,” as recited in each challenged claim of the ’463 patent. As such, Petitioner does not demonstrate a reasonable likelihood it would prevail in showing at least one claim is unpatentable, as 35 U.S.C. § 314(a) requires.” slip op. at 4
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“I agree with Patent Owner. Neither Kraft nor Wong uses the term “data feed” or characterizes its listing of Web pages (Kraft) or nodes (Wong) provided in response to a user-provided query as a “data feed.” See Ex. 1005, 5:8–12, 6:52–59, 16:52–59, 18:31–54, 18:61–19:23; Ex. 1007 ¶¶ 22, 28, 35. Petitioner points to a disclosure in the ’463 patent of a user requesting a personal information aggregator (PIA) to “receive a data feed.” Pet. 23 (citing Ex. 1001, 12:52–64). But Petitioner does not sufficiently explain how this disclosure provides support for broadly construing “browsing a data feed” to encompass a user entering criteria for a search (and not specifically requesting a “data feed”) and receiving a listing of Web pages or nodes in response. See Pet. 23, 58–59; Ex. 1003 ¶¶ 102, 201–202; Ex. 1005, 6:57–59 (describing users searching a data store for models that match “user-specified criteria”), 18:41–54 (describing a user submitting a query); Ex. 1007 ¶ 28 (describing “searching and selecting from keyword identifiers or other search terms”). Petitioner’s reliance on a separate disclosure in the ’463 patent of the PIA “searching . . . the network for information about the situation or event” also is not persuasive, because the ’463 patent does not describe that embodiment as involving a data feed or browsing a data feed. See Pet. 23 (citing Ex. 1001, 20:46–51) (emphasis omitted); Ex. 1001, 20:46–51.” slip op. at 3
§ 103 obviousnessPatents in suitUS 12,256,463 - Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Jul 1, 2026 · IPR2025-00222 · APJ Frederick C Laney · IPR · Final written decision
Claims 1, 2, 4, 5, 8–11, 13, and 14 are unpatentable over Yu and Miyazaki; claims 15, 16, and 19 were not shown unpatentable over Matsushima.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “at, and before, the earliest claimed priority date of the ’158 patent . . . would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2–3 years of experience in digital imaging systems,” adding that “[l]ess experience may be sufficient with additional education, and likewise, less education may be sufficient with additional work experience.” Pet. 6–7 (citing Ex. 1003 ¶¶ 16–18). Patent Owner does not offer a competing definition or dispute Petitioner's articulation. Based on the entire record, we adopt Petitioner’s characterization of the level of skill for one of ordinary skill in the art because that characterization, we find, is consistent with the ’158 patent and the asserted prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“We determine that the claims require a per-channel determination of integration time—that is, an integration time arrived at for each sensor or channel individually—and cannot be satisfied by a single global value merely applied uniformly across the sensors. We do not, however, read the independent claims to require that the per-channel integration times differ from one another.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner
“We adopt the definition clearly and unambiguously set forth in the specification, which was likewise adopted by the Court in the related litigation. See Pet. 7–8, 55; Pet. Reply 1–2 (district court construing the term to mean “the time the image sensor collects and integrates signal from the scene”). The specification states that the integrated photo-charge “is directly related to the time the image sensor collects and integrates signal from the scene,” and that “[t]his is known as integration time.” Ex. 1001, 4:4–7. Accordingly, the ’158 patent demonstrates that the inventors indisputably acted as a lexicographer for the term “integration time.”” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“We construe “during a frame” to mean the period during which data for a single frame of an image is captured. The limitation is satisfied where the per-channel integration time is effectuated during the frame; it does not require that the integration time be re-determined mid-frame, nor does it require actuation of a “charge integration switch.” The specification’s only use of the phrase confirms this reading: “each camera channel is controlled during a frame under an independent integration time.” Ex. 1001, 3:45–50. Consistent with that usage, the specification describes selecting an integration time for each channel and then integrating the photo-signal “within a single frame of data,” and describes placing the charge-integration switch in a state to allow charge to accumulate for the selected period and then transferring the accumulated charge upon completion of the integration period. Id. at 4:51–54, 11:3–18. We decline Patent Owner’s proposal to require in-frame actuation of a charge-integration switch, for the same reason we decline to import that structure into “integration time.” We also decline to read the phrase to require mid-frame re-determination of the integration time, because the patent’s own embodiment selects an integration time and then integrates charge during the frame under that selected time. Ex. 1001, 4:51–54, 11:3– 18. So construed, “during a frame” is not redundant of the independentclaim limitation: it adds that the per-channel control occurs within a single frame (intrascene), as distinct from adjustment from one frame to the next (interscene).” slip op. at 15
Patent outcomesUS 9,232,158 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,232,158 - Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17
- Expert testimonyPetitioner expert discountedDecided for patent owner
“that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21
Patent outcomesUS 8,686,562 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,686,562 - Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00167 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1–13, 21, 22, 64, and 65 are unpatentable over the asserted grounds; claims 15, 17, 19, 20, 23–30, 66, and 67 were not shown unpatentable over KR996, JP705, and Beltrami.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“B. Analysis “The moving party has the burden of proof to establish that it is” slip op. at 9
- Skill levelOther
“B. Level of Ordinary Skill in the Art We review the grounds of unpatentability in view of the” slip op. at 21
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownPrior construction adoptedDecided for petitioner
“lexicographical, we agree with the parties that “mainframe” is not limited to a single weldment. Pet. Init. CC Br. 1; PO Init. CC Br. 1–2. Instead, a single-weldment “mainframe” is merely one disclosed embodiment. See Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner
“probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 55
Patent outcomesUS 9,321,386 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,321,386 - Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00171 · APJ Eric C Jeschke · IPR · Final written decision
Claims 1–13 and 28 are unpatentable over KR996; claims 14–16 and 19–27 were not shown unpatentable over Bares and Beltrami.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“(“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”). Turning to the prosecution history, neither Petitioner nor Patent Owner has highlighted any specific statements that impact the scope of the term “mainframe.” And from our independent review, we do not discern any such statements. For these reasons, the intrinsic evidence as a whole supports construing “mainframe” as a primary supporting structure.” slip op. at 35
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusNot shown unpatentable
“probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 54
- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 28
Patent outcomesUS 10,202,266 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,202,266 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 29, 2026 · IPR2025-00247 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1–19 were not shown unpatentable under any of six obviousness grounds because Truitt did not teach or suggest the claimed severity calculation and index, and the Mumford combinations lacked the required sensor disclosures.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, Resmed Inc., as a real party in interest. Paper 29. Petitioner filed an opposition. Paper 31. Patent Owner filed a reply. Paper 32. We denied the Motion to Terminate. Paper 40.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“disorder symptoms” require a “quantitative” calculation or use of an algorithm, we also disagree. See PO Resp. 14–16. First, nothing in the language of the claims themselves describes or requires a “quantitative” calculation or an algorithm. See generally Ex. 1001, 23:6–26:59. To be sure, the ’029 patent discloses embodiments that use known algorithms to “quantify the level of severity of the subject’s sleeping disorder or symptoms.” See, e.g., id. at 20:16–19. But the Specification does not require an algorithm. The Specification also indicates that quantification is merely “preferable” (i.e., not required), and is merely one embodiment. See, e.g., id. at 19:8–12 (“The signals from the one or more sensors used in various embodiments of the present invention are preferably analyzed using a processor and software that can quantitatively estimate or determine the severity of the subject’s sleeping disorder or symptoms.”) (emphasis added), 4:51–59 (“Finally, in still another embodiment, the present invention includes a sleeping disorder treatment system comprising a device for diagnosing and creating a quantitative output of a level of severity of a subject’s sleeping disorder or symptoms . . . .”) (emphasis added); see also Reply 5–6 (citing Ex. 1001, 4:3–59 and 19:8–12 and stating that the ’029 patent lists “numerous embodiments where only one of seven include a quantitative assessment”). Elsewhere, the Specification more generally states that signals from sensors are “analyzed to determine the level of severity of the symptoms,” without specifying that such analysis must be “quantitative” or performed by an algorithm. See Ex. 1001, 3:41–44. In view of these disclosures, Patent Owner does not persuade us to adopt its narrowing claim construction. Indeed, our reviewing court has “repeatedly warned against confining the claims” to specific embodiments disclosed in the Specification. Phillips, 415 F.3d at 1323. Patent Owner’s reliance on a prior Board decision in PGR2024- 00012, which related to the parent of the ’029 patent, is unavailing. See PO Resp. 15–16. We agree with Petitioner that in the cited case, “[t]he Board made no findings about the meaning of the term calculating ‘the data of a severity of the sleep disorder symptoms of the subject’ for claim construction.” Reply 8. Indeed, neither party offered any claim construction, and the Board determined that no claim construction was necessary for purposes of that decision. See ResMed Corp., PGR2024- 00012, Paper 7 at 8. The page of the decision Patent Owner cites addresses written description support in the specification for the claims challenged in that PGR, not claim construction. See id. at 16. In any event, the cited decision is a decision on institution. The Board’s statements there are, by nature, preliminary findings and conclusions based on a preliminary record, and are not binding here. For at least the above reasons, Patent Owner does not persuade us to adopt its narrowing claim construction and we find that the term “data of a severity” does not need construction because the words of the term are clear on their face.” slip op. at 31
- Strike new argumentNew argument disregardedDecided for patent owner
“skilled artisan would have incorporated only portions of Mumford’s algorithm into Truitt’s PAP (i.e., only those portions related to “the detection of sleep disordered events” and not the portions of the algorithm related to “determin[ing] sleep stage”) comes too late because this argument was not in the Petition. See, e.g., Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286–87 (Fed. Cir. 2017) (rejecting petitioner’s “attempts to cure the petition’s deficiencies in its subsequent briefing to the Board”). The Petition does not discuss modifying Mumford’s sleep efficacy algorithm before incorporating it into Truitt’s PAP device or incorporating only certain features of the algorithm. Indeed, the Petition and Dr. Kirkness rely on Mumford’s ability to detect sleep arousals when mapping Mumford to the claimed “data of a severity” and “index.” See Pet. 69–70; Ex. 1003 (Kirkness Decl.) ¶¶ 323–325. Mumford discloses that the mask electrodes detect arousals. See Ex. 1009 (Mumford) 2:4–10, 11:39–48. The same lack of disclosure plagues Petitioner’s belated Reply argument that Truitt’s ports 74 and 76 can incorporate electric sensing elements that would have functioned similar to Mumford’s electrodes. See Reply 22. The Petition did not mention ports 74 and 76 or otherwise suggest that a skilled artisan would have added functionality similar to Mumford’s electrodes to Truitt’s PAP, and we find that it is too late on Reply for Petitioner to posit this modification.” slip op. at 40
- Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed
“significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable to Dr. Jafari’s opinions. His declaration was not prepared for this proceeding and thus Dr. Jafari was not subject to cross examination in this proceeding. See Reply 6 n.3. Moreover, Dr. Jafari was not opining on claim construction; rather, he was addressing the alleged indefiniteness. See Ex. 2020 (Jafari Decl.) 12 (heading addressing definiteness), ¶¶ 41–42, 46. Additionally, paragraphs 41–42 of Dr. Jafari’s declaration discuss claim terms phrases in a different patent (US 11,375,921), which explicitly include the terms “quantified” and “quantitative.” See Reply 6–7; Ex. 2020 (Jafari Decl.) ¶ 34. For at least these reasons, Patent Owner has not persuaded us that Dr. Jafari’s testimony is applicable here. Further, regarding the portion of Patent Owner’s proposed construction reciting “the degree of deviation from the baseline characteristics of a patient without sleep disorder symptoms,” Dr. Borkholder does not do his own analysis, but instead simply states that he “agree[s] with the litigation claim construction opinions of Dr. Jafari.” Ex. 2019 (Borkholder Decl.) ¶ 53. This is insufficient, and thus we do not credit Dr. Borkholder’s testimony regarding claim construction. We instead credit Dr. Kirkness’s statement that “[s]everity data is frequently calculated as the deviation from baseline characteristics of the patient himself, not a generic person ‘without sleep disorder symptoms.’” Ex. 1071 (Kirkness Reply Decl.) ¶ 13; Reply 9. As Dr. Kirkness explains, and Patent Owner does not dispute (see generally Sur-reply), “[t]he ‘baseline characteristics of a [generic] patient without sleep disorder symptoms’ would be irrelevant to any particular patient with their own unique breathing patterns and sleep disorder symptoms.” Ex. 1071 (Kirkness Reply Decl.) ¶ 13 (second alteration in original). For at least these reasons, we reject Patent Owner’s proposed claim construction.” slip op. at 30
Patent outcomesUS 11,872,029 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,872,029 - Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentablePTAB · Jun 23, 2026 · IPR2025-00219 · APJ Frederick C Laney · IPR · Final written decision
Claims 11–22 were not shown unpatentable under any § 103 ground because the prior art did not teach or suggest receiving the claimed resource allocation and multi-level TPC command on one physical channel.
RulingsFinal written decision- BurdenNot shown unpatentable
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). Moreover, a petitioner should 1 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112-29, 125 Stat. 284 (2011), amended 35 U.S.C. § 103, effective March 16, 2013. Because the application from which the ’153 patent issued claims priority to an application filed before this date, the pre-AIA version of § 103 applies. not “place the burden on [the Board] to sift through information presented by the Petitioners, determine where each element [of the challenged claims] is found in [the cited references], and identify any differences between the claimed subject matter and the teachings of [the cited references.]” Google Inc. v. EveryMD.com LLC, IPR2014-00347, Paper 9 at 25 (PTAB May 22, 2014).” slip op. at 5
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“The second and third asserted benefits—reduced complexity and reduced latency—rest on the declaration of Dr. Kotzin (Ex. 1003 ¶ 64) rather than on any disclosure of Andersson or Khan. We accord that testimony little weight on this point because it asserts the benefits in conclusory terms without explaining why they would result from inserting a scheduling grant into Andersson’s undefined “other bits,” as distinct from Khan’s separate-slot design.” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill in the Art Petitioner asserts that ordinarily skilled artisans “would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems.” Pet. 14. Petitioner’s proposed definition, which Patent Owner does not dispute, appears reasonable and consistent with the asserted prior art and the ’500 Patent. Therefore, we adopt it as the ordinary level of skill of an artisan in the field of the patented technology for our analysis below.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent Owner offers a proposed construction for the recited “single physical channel” found in limitation 11.2 and “an accumulation of TPC commands” found in independent claims 12 and 18. PO Resp. 9–17. Petitioner likewise addresses the scope of an accumulation of TPC commands, but Petitioner does not contest directly Patent Owner’s proposed construction for “single physical channel.” Pet. Reply 2–7. We determine, however, that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
Patent outcomesUS 9,706,500 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,706,500 - Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentablePTAB · Jun 22, 2026 · IPR2025-00217 · APJ Frederick C Laney · IPR · Final written decision
The Board held claims 1–5, 10–15, and 20 not unpatentable under four §103 grounds because the petitioner did not establish the claimed enabled-accumulation indication or single-channel combination.
RulingsFinal written decision- BurdenNot shown unpatentable
“onset to show with particularity why the patent it challenges is 1 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112-29, 125 Stat. 284 (2011), amended 35 U.S.C. § 103, effective March 16, 2013. Because the application from which the ’153 patent issued claims priority to an application filed before this date, the pre-AIA version of § 103 applies. 2 US 6,334,047 B1, iss. Dec. 25, 2001 (Ex. 1009). 3 US 2001/0036238 A1, pub. Nov. 1, 2001 (Ex. 1010) 4 US 2004/0190485 A1, pub. Sept. 30, 2004 (Ex. 1005). 5 US 2004/0077370 A1, pub. Apr. 22, 2004 (Ex. 1008). 6 US 6,600,772 B1, iss. July 29, 2003 (Ex. 1004). 7 US 6,529,741 B1, iss. Mar. 4, 2003 (Ex. 1007). unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to the patent owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). Moreover, a petitioner should not “place the burden on [the Board] to sift through information presented by the Petitioners, determine where each element [of the challenged claims] is found in [the cited references], and identify any differences between the claimed subject matter and the teachings of [the cited references].” Google Inc. v. EveryMD.com LLC, IPR2014-00347, Paper 9 at 25 (PTAB May 22, 2014).” slip op. at 5
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill in the Art Petitioner asserts that ordinarily skilled artisans “would have a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of wireless communication systems or design of similar communication systems.” Pet. 15. Petitioner’s proposed definition, which Patent Owner does not dispute, appears reasonable and consistent with the asserted prior art and the ’153 patent. Therefore, we adopt it as the ordinary level of skill of an artisan in the field of the patented technology for our analysis below.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“apparent agreement between the parties: “TPC command accumulation” refers to a process that collects and uses TPC commands from a network device to cumulatively affect transmission power. And having studied the intrinsic record of the ’153 patent, we are in accord. But, we decline to further limit the construction of “TPC command accumulation” in the manner proposed by either party––i.e., (1) each TPC command adjustment must be summed to cumulatively affect transmission power (as proposed by Petitioner) or (2) a TPC command value must be added to an integrator. Although both parties are able to point to disclosures in the ’153 Patent where the TPC command accumulation of an exemplary embodiment is described as using an integrator and/or summing each TPC command adjustment to cumulatively affect a UE’s transmission power (PO Resp. 16 (citing Ex. 1001, 3:39–43, 7:15–29, 9:27–42; Ex. 2016 ¶¶ 35–42); Pet. Reply 4–5 (citing Ex. 1001, 3:39–43, 7:2–6, 7:8–22, 9:28–40)), neither party has demonstrated persuasively that the intrinsic record of the ’153 Patent demonstrates a clear intent to limit “TPC command accumulation” to those particular embodiments.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“A rationale supports obviousness only where the proffered benefit would flow from the specific modification proposed; a benefit that the prior art realizes in a different structural context does not, without more, establish that the same benefit would result from inserting one reference’s element into the other. On this record, the nexus between Khan’s benefits and Petitioner’s “other bits” modification is missing.” slip op. at 40
Patent outcomesUS 10,952,153 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,952,153
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.