• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Oct 7, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Rehearing

  The Board denied Solus’s rehearing request, leaving institution denied for claims 1–8 because the petition did not adequately show motivation to combine Hanafusa and Dobashi.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve Dobashi’s RSm values. Dobashi teaches that because RSm “can be adopted as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66–3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66– 3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 4

  § 103 obviousness
  Patents in suitUS 11,346,014
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Oct 7, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Rehearing

  The Board denied rehearing and left in place its denial of institution because Petitioner did not show that claims 1–10 were likely obvious over the asserted combinations.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “II. STANDARD OF REVIEW When rehearing a decision on institution, we do not review the merits of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors.” Arnold Partnership v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004) (citing In re 1 US 2013/0108922 A1, published May 2, 2013 (Ex. 1004, “Shinozaki”). 2 G. Khatibi, Temperature Dependent Elastic and Thermal Properties of Thin Copper Foils, Copper; Proceedings of the International Conference Copper ’06 (2006) (Ex. 1006, “Khatibi”). 3 Korean Patent Pub. No. 10-2012-0003485, published Jan. 10, 2012 (Ex. 1013; Ex. 1014 (English translation), “Toshio”). 4 US 2013/0108887 A1, published May 2, 2013 (Ex. 1012, “Kim”). 5 Griesi, M.B., Characterization of Electrodeposited Copper Foil Surface Roughness for Accurate Conductor Power Loss Modeling (2014) (Master’s Thesis, University of South Carolina) (Ex. 1015, “Griesi”). rehearing has the burden to show that the decision should be modified. 37 C.F.R. § 42.71(d). Additionally, the request for rehearing “must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply.” Id.” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not shown unpatentable

    “For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE[6] value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added).” slip op. at 4

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Petitioner, however, does not adequately explain why a POSITA would have been motivated to modify Kim’s copper foil surface to have a Pc value of 19.2 as reported in Griesi. In particular, neither Petitioner nor Dr. Randall points us to, nor do we discern, any teaching in Griesi that a peak count of 19.2 provides any particular benefits or properties that would have lead a POSITA to modify Kim’s copper foil surface as Petitioner proposes. Instead, Petitioner’s arguments that a POSITA would have been motivated to modify Kim’s copper foil surface with Griesi’s peak count patent itself. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 421 (2007) (stating that the fact finder must be aware “of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning”). It was Petitioner’s burden to establish that the combined teachings Kim and Griesi disclose limitation [1g] as proposed. We are not persuaded that we misapprehended Petitioner’s argument when we determined that Petitioner did not meet that burden.” slip op. at 8

  • BurdenDecided for patent owner

    “It was Petitioner’s burden to establish the Khatibi, alone or in combination with Shinozaki, Toshio, and Kim, discloses limitation [1d]. We concluded that Petitioner failed to meet that burden for the reasons explained in our Decision. We are not persuaded that we overlooked or misapprehended Khatibi’s disclosures, or Petitioner’s evidence and explanation thereof, in doing so.7” slip op. at 5

  § 103 obviousnesscites KSR
  Patents in suitUS 10,811,689
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Sep 15, 2025 · IPR2025-00005 · APJ John G New · IPR · Rehearing

  Denied Solus’s rehearing request; the Board maintained its denial of institution because the petition did not show a reasonable likelihood of prevailing on the challenged claims.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors.” Arnold” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “[O]f the 44 specimens tested by Ye, as revealed in Ye’s Table II, only a single specimen, specimen 15, meets the required TC ratios recited in challenged claim 1 of the ’541 patent. Furthermore, none of the references cited by Petitioner teach, or even remotely suggest, the four requisite TC ratios recited by challenged claim 1. We find Petitioner’s argument that a person of ordinary skill in the art would have been motivated to exclusively select Ye’s sample 15, out of the remaining 43, to which to apply the teachings of Hara and Otsuka concerning the requisite tensile strength and weight deviation ranges in the hope of arriving at the claimed invention, is implausible. Indeed, only the ’541 patent, among all of the evidence of record, that actually mentions the required texture coefficient ratios recited in challenged claim 1. Petitioner provides no convincing argument as to why a skilled artisan would have selected sample 15 for combination with Hara and Otsuka.” slip op. at 10

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “At the heart of this flaw is Petitioner’s argument, and Dr. Josefowicz’s opinion, that it would have been conventional in the art at the time of filing to vary the electrolyte concentration, electrolysis plating parameters, temperature, and the use of organic and inorganic additives, in order to obtain a copper foil with tensile strength and elongation values falling within the claimed ranges as these ranges were well known, at least since 1974. Ex. 1003 ¶ 63. This statement is largely unsupported by evidence of record, with the sole exception of Table 2 of Lowenheim, which, as Patent Owner points out, provides tensile strengths well outside the claimed range. Petitioner provides insufficient guidance as to how a person of ordinary skill in the art would have known which parameters to vary, or how to vary them, to provide the foil of Hirose with a tensile strength or weight deviation within the claimed range. Dr. Josefowicz’s statement that this would result from routine optimization, and was “conventional” may or may not be true, but it is insufficiently supported by evidence of record to be persuasive.” slip op. at 6

  § 103 obviousness
  Patents in suitUS 9,457,541
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Sep 15, 2025 · IPR2025-00005 · APJ John G New · IPR · Rehearing

  The Board denied rehearing and left in place its denial of institution because Petitioner did not show a reasonable likelihood of prevailing on claims 1-4.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “In summary, we again conclude that Petitioner has failed to provide sufficient evidence to demonstrate that a person of ordinary skill in the art would have had a reasonable expectation of success in combining the cited prior art references, in combination with Dr. Josefowicz’s relatively unsupported testimony concerning a skilled artisan’s ability to optimize various constituents and conditions, to arrive at the claimed invention. Petitioner has not pointed to any argument or unconsidered evidence of record that is sufficient to show that, in reaching its conclusion, the Board abused its discretion by basing its Decision on an erroneous interpretation of law, a factual finding not supported by substantial evidence, or an unreasonable judgment in weighing relevant factors. Arnold, 362 F.3d at 1340.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “teaches the tensile strengths of various types of copper-electroplated steel electrical cable wire of different properties, including high strength, hardness, low electrical resistivity, near zero strength, good leveling, and thermal stability, some of which fall within the claimed range of tensile strength of 30 to 40 kgf/mm2. Lowenheim, 196, Table II. However, none of these categories correspond to those copper foil properties recited in the claims, and Dr. Josefowicz’s testimony provides little guidance as to how a person of ordinary skill in the art would have known how to optimize the recited properties, and particularly so in combination with the teachings of Hirose and the other cited prior art references. Furthermore, as we noted in our Decision:” slip op. at 7

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “At the heart of this flaw is Petitioner’s argument, and Dr. Josefowicz’s opinion, that it would have been conventional in the art at the time of filing to vary the electrolyte concentration, electrolysis plating parameters, temperature, and the use of organic and inorganic additives, in order to obtain a copper foil with tensile strength and elongation values falling within the claimed ranges as these ranges were well known, at least since 1974. Ex. 1003 ¶ 63. This statement is largely unsupported by evidence of record, with the sole exception of Table 2 of Lowenheim, which, as Patent Owner points out, provides tensile strengths well outside the claimed range. Petitioner provides insufficient guidance as to how a person of ordinary skill in the art would have known which parameters to vary, or how to vary them, to provide the foil of Hirose with a tensile strength or weight deviation within the claimed range. Dr. Josefowicz’s statement that this would result from routine optimization, and was “conventional” may or may not be true, but it is insufficiently supported by evidence of record to be persuasive. Id. (emphasis added) (footnote omitted).” slip op. at 6

  § 103 obviousness
  Patents in suitUS 9,457,541
• Zhuhai Cosmx Battery Co., Ltd. v. Ninge Amperex Technology LimitedInstitution denied
  PTAB · Aug 20, 2025 · IPR2025-00385 · APJ Debra L Dennett · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were anticipated by Nishikawa or obvious over the asserted combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition and Preliminary Response, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we deny the Petition and decline to institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner contends that A person of ordinary skill in the relevant art would typically hold an advanced degree in chemistry, material science, and/or a related discipline, and have at least two years of experience with designing and/or fabricating battery separators or have an equivalent level of education, training, and experience. Pet. 5. Patent Owner “adopts the definition proposed by Petitioner” for the purposes of the Preliminary Response. Prelim. Resp. 22. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s unopposed definition because it is consistent with the specification. We note that neither party indicated that the result would change under any different definition.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Absolute plastic deformation rate” and “relative plastic deformation rate” are the only claim terms disputed in this proceeding, and are clearly defined in the Specification and in claim 1. See Spec. 4:22–27, 4:47–54; 25:31–37. Because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review). slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Petitioner’s arguments are unconvincing. Petitioner points to nothing in Nishikawa that allows a POSITA to determine L2 (defined as “a length of 4 Tensile strength is measured as force per units area, such as MPa or psi. One MPa equals one N/mm2. Nishikawa Table 1 discloses tensile strength in N/cm. Ex. 1004 Table 1. Petitioner makes calculations to convert the reported N/cm into N/m2 and then to GPa, but provides no explanation for why tensile strength is reported in N/cm or how it was measured. See Pet. 31. the porous substrate after the porous substrate is stretched to breakage and docked along the fracture caused by the breakage and flattened”) or L2 – L0. See generally Pet., Ex. 1004. Petitioner and its expert, Dr. Pecht, fail to adequately explain why tensile strength divided by Young’s modulus is “a proxy for L1 – L2” or why such a proxy is sufficient to disclose the limitation as stated. Instead, we are required to rely on “approximations” and “estimates” with insufficient explanation of why such they are appropriate or adequate. See Pet. 26, 30, 32; see also Ex. 1003 ¶¶ 97, 105–108, 111.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,964,927
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · May 19, 2025 · IPR2025-00005 · APJ John G New · IPR · Institution

  The Board denied institution on all grounds, finding no reasonable likelihood that claims 1–4 were obvious because Petitioner did not show a reasonable expectation of success in combining the cited references.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “Analysis The burden of proving the unpatentability of the challenged claims rests with (and is borne at all times by) Petitioner. 35 U.S.C. §§ 314(a), 316(e); see also In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1375 (Fed. Cir. 2016). To satisfy this burden, Petitioner must “articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness”; “mere conclusory statements” will not suffice. Magnum Tools, 829 F.3d at 1380. Indeed, “[i]t is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Furthermore, “[a]n obviousness determination requires finding that a person of ordinary skill in the art would have been motivated to combine or modify the teachings in the prior art and would have had a reasonable expectation of success in doing so.” See Regents of the Univ. of Cal. v. Broad Inst., Inc., 903 F.3d 1286, 1291 (Fed. Cir. 2018). We have consistently denied institution of inter partes review in cases in which the petitioner fails to meet its burden of demonstrating a reasonable likelihood of success at trial with respect to the latter requirement. See NJOY, LLC v. JUUL Labs., Inc., IPR2024-00536, Paper 17 (PTAB Aug. 12, 2024) (denying institution where petitioner did not show a reasonable expectation of success in combining the asserted references); see also Honeywell Int’l Inc. v. DSM IP Assets, B.V., IPR2024-00493, Paper 7 (PTAB Aug. 21, 2024). We conclude that, in this instance, Petitioner fails to meet its burden of showing that a person of ordinary skill in the art would have had a reasonable expectation of success in combining the references.” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “As an initial matter, we note that, of the 44 specimens tested by Ye, as revealed in Ye’s Table II, only a single specimen, specimen 15, meets the required TC ratios recited in challenged claim 1 of the ’541 patent. Furthermore, none of the references cited by Petitioner teach, or even remotely suggest, the four requisite TC ratios recited by challenged claim 1. We find Petitioner’s argument that a person of ordinary skill in the art would have been motivated to exclusively select Ye’s sample 15, out of the remaining 43, to which to apply the teachings of Hara and Otsuka concerning the requisite tensile strength and weight deviation ranges in the hope of arriving at the claimed invention, is implausible. Indeed, only the ’541 patent, among all of the evidence of record, that actually mentions the required texture coefficient ratios recited in challenged claim 1. Petitioner provides no convincing argument as to why a skilled artisan would have selected sample 15 for combination with Hara and Otsuka. Rather, Petitioner’s argument appears to be based upon impermissible hindsight reconstruction. However: Any judgment on obviousness is in a sense necessarily a reconstruction based upon hindsight reasoning, but so long as it takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant's disclosure, such a reconstruction is proper. In re McLaughlin, 443 F.2d 1392, 1395 (C.C.P.A. 1971). Accordingly, Petitioner’s failure to suggest a reason as to why a person of ordinary skill in the art would have been motivated to select that single specimen, without knowledge of the specific TC ratios disclosed by the ’541 patent argues against Petitioner’s contention that the claims are obvious.” slip op. at 47

  • PTAB / AIA Trials › Discretionary denialNot reached

    “Discretionary Denial of Institution under 35 U.S.C. §§ 314(a) and 325(d) Because we deny institution of inter partes review on the merits, we do not reach the parties’ arguments in this respect.” slip op. at 58

  § 103 obviousnessDiscretionary denialcites Phillips · KSR
  Patents in suitUS 9,457,541
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,346,014
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 23, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were unpatentable over either asserted § 103 ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had at least an undergraduate degree in materials science, chemical engineering, electrical engineering, or related field, or equivalent knowledge, training, or experience, with at least two years of experience working on the development of materials or components for electronic devices such as batteries.” Pet. 4. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less 7 We refer to the page numbers added by Petitioner to the bottom-center of the page. formal education.” Id. (citing Ex. 1003 ¶ 10). Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’689 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))).” slip op. at 10

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “We are not persuaded, on this record, that Petitioner adequately establishes that Khatibi discloses a CTE in the claimed range of 16 to 22 µm/(m·°C.). Petitioner’s argument that Khatibi’s reported values meet this claim limitation are based solely on Dr. Randall’s testimony that Khatibi’s measurement method would produce results that would not significantly differ from results determined using the claimed method. See Pet. 16–18 (citing Ex. 1003 ¶¶ 56–60). Dr. Randall’s testimony, however, is largely conclusory and unsupported by adequate explanation and/or objective evidence. For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added). to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 12 at 5 (PTAB Feb. 10, 2023) (finding that “the Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support”); Upjohn Co. v. Mova Pharm. Corp., 225 F.3d 1306, 1311 (Fed. Cir. 2000) (“Lack of factual support for expert opinion to factual determinations, however, may render the testimony of little probative value in a validity determination.” (quoting Ashland Oil, Inc. v. Delta Resins and Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985))); see also In re Ethicon, Inc., 844 F.3d 1344, 1348, 1352 (Fed. Cir. 2017) (concluding that the Board properly gave “little weight” to conclusory expert testimony of objective indicia). Because Petitioner offers Dr. Randall’s testimony to supply a limitation missing from the prior art, namely, the CTE measurement method, and we give Dr. Randall’s unsupported and conclusory testimony little weight, we are not persuaded that Petitioner establishes a reasonable likelihood of showing that Khatibi discloses limitation [1d].” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “second surfaces of the electrolytic copper foil ranges from 3 to 92.” Ex. 1001, 13:62–63. Petitioner contends that “Kim teaches that the electrolytic copper foil (e.g., untreated or treated copper foil) having Rz less than 2 µm is advantageous toward battery efficiency and performance,” and, similarly, Griesi describes the use of untreated electrolytic copper foil with an Rz value less than 2 µm in printed circuit boards that are compatible with secondary batteries. Pet. 58–59 (citing Ex. 1012, claim 2, ¶¶ 13, 25, 27; Ex. 1003 ¶ 157). In particular, Petitioner notes that Griesi’s Figure 3.16 describes an “Rz value of 1.2 µm.” Id. at 59 (citing Ex. 1015, 53–54; Ex. 1003 ¶ 158). Petitioner asserts that “Dr. Randall explains that a POSITA would have also recognized another surface roughness-related parameter, Rpc, in Griesi as a potentially useful parameter that can be optimized to further enhance uniformity or generally improve Kim’s copper foil surface, for example, to prevent wrinkles or achieve other advantageous effects.” Id. (citing Ex. 1003 ¶ 159). Although Dr. Randall demonstrates that Griesi’s Pc (or Rpc) value is 19.2 over a 4 mm sampling length (Ex. 1003 ¶ 155), Petitioner does not contend that Griesi addresses this value, or indicates any benefit that might be derived from its use. Instead, Griesi’s Pc value appears to be an incidental finding, which is not discussed or analyzed in the reference. See incidental, unexamined finding would lead a POSITA to import Griesi’s Pc value into Kim’s copper foil, absent a hindsight desire to reconstruct the claimed invention. As such, Petitioner’s arguments with respect to Kim and Griesi are not persuasive. See Cheese Sys. Inc. v. Tetra Pak Cheese and Powder Sys., Inc., 725 F.3d 1341, 1352 (Fed. Cir. 2013) (“Obviousness cannot be based on the hindsight combination of components selectively culled from the prior art to fit the parameters of the patented invention.” (internal quotations marks omitted)). Thus, we are not persuaded, on this record, that the combined disclosures of Kim and Griesi teach all of the elements of limitation [1g].” slip op. at 23

  § 103 obviousnesscites Phillips
  Patents in suitUS 10,811,689
• Solus Advanced Materials Co, Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution

  The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied

    “whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

    “Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

    “Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9

  § 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 10,480,090

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.