- Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision
Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13
- Prior constructionPrior construction adoptedDecided for petitioner
“In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner
“evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62
Patent outcomesUS 11,336,832 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,336,832 - Infineon Technologies AG v. Amatech Group LimitedRehearing grantedPTAB · Apr 3, 2024 · IPR2022-00951 · APJ Stacey G White · IPR · Rehearing
On rehearing, the Board held claim 3 unpatentable as obvious over Eray-WO799, revising the final written decision’s outcome for that claim.
RulingsRehearing decision- RehearingRehearing, grantedGranted
“unrebutted expert testimony corroborated by two prior art patents describing RFID smart cards” and that this evidence “demonstrated that a conventional and obvious way to manufacture Eray-WO799’s smart card was by forming a card antenna on a card body before adding the chip.” Req. Reh’g 2 (citing Pet. 39–40; Paper 20 (“Reply”) at 31). Thus, Petitioner argues a person of ordinary skill in the art would have understood that an obvious and conventional way of manufacturing the card body of Eray- WO799 would have had unconnected ends as required by our construction. Id. Paragraph 149 of Dr. van der Weide’s declaration states that a person of ordinary skill in the art “would have understood that an obvious and conventional way to construct the smart card as shown in Eray-WO799 FIG. 12 would have been to form the turns S1, S2, SC3 and SC4 on or in the card body (e.g., by laying wire) before connecting the wire to (or forming) access terminals and connecting module M.” Ex. 1003 ¶ 149. In support of that because it was “directed to solving problems that occur during the manufacture of cards.” Dec. 42 (citing Ex. 1028, 1:25–2:53). Petitioner points out that “[w]hile Ryu discloses manufacturing techniques, Ryu also describes and claims a ‘communication system’ with a smart card and a reader.” Reh’g Req. 9 (citing Ex. 1028, code (57), claims 1–2). Petitioner is correct in noting that Ryu’s disclosures are not so narrow as we described in the Decision. As to Finn-089, we found that reference unhelpful because it was “directed to a process for the contacting of a wire conductor in the course of manufacture of a transponder unit.” Dec. 41–42 (citing Ex. 1015, 1:15–17). Petitioner asserts that we failed to acknowledge to the fact that Finn-089 was incorporated by reference in the ’240 patent noting that “[p]atents incorporated by reference ‘are effectively part of the host [patents] as if [they] were explicitly contained therein.’” Reh’g Req. 9 (citing X2Y Attenuators, LLC v. U.S. Int’l Trade Comm’n, 757 F.3d 1358, 1362–63 (Fed. Cir. 2014) (alterations in Rehearing Request)). On this record, we agree that we overlooked and misapprehended the import of Ryu and Finn-089 and if those references are given appropriate weight, they lend further credence to Dr. van der Weide’s testimony that one of ordinary skill in the art would have known that an obvious way to manufacture Eray-WO799 would have created an intermediate product with requisite free ends. Further, we adopt the full reasoning stated in the Dissent as to the unpatentability of claim 3 (Dec. 53–57). Therefore, we GRANT Petitioner’s Request for Rehearing slip op. at 6
- Skill levelSkill level petitioner adoptedOther
“As stated in our Final Written Decision, we adopted Petitioner’s definition of the person of ordinary skill in the art and found that the person of ordinary skill in the art would have possessed “a Bachelor’s degree in electrical engineering or a similar field, and 1–2 years of experience researching and developing antennas used in RFID applications.” Dec. 6–7 (citing Pet. 8; PO Resp. 18). Petitioner’s declarant, Dr. Daniel van der Weide, supported Petitioner’s definition, which was adopted for this proceeding. Ex. 1003 ¶ 25. Dr. van der Weide defined himself as “a person of more than ordinary skill in the art during the relevant timeframe” because “[b]y 2010, [he] held a Ph.D. in electrical engineering, and [he] had at least” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“unrebutted expert testimony corroborated by two prior art patents describing RFID smart cards” and that this evidence “demonstrated that a conventional and obvious way to manufacture Eray-WO799’s smart card was by forming a card antenna on a card body before adding the chip.” Req. Reh’g 2 (citing Pet. 39–40; Paper 20 (“Reply”) at 31). Thus, Petitioner argues a person of ordinary skill in the art would have understood that an obvious and conventional way of manufacturing the card body of Eray- WO799 would have had unconnected ends as required by our construction. Id. Paragraph 149 of Dr. van der Weide’s declaration states that a person of ordinary skill in the art “would have understood that an obvious and conventional way to construct the smart card as shown in Eray-WO799 FIG. 12 would have been to form the turns S1, S2, SC3 and SC4 on or in the card body (e.g., by laying wire) before connecting the wire to (or forming) access terminals and connecting module M.” Ex. 1003 ¶ 149. In support of that because it was “directed to solving problems that occur during the manufacture of cards.” Dec. 42 (citing Ex. 1028, 1:25–2:53). Petitioner points out that “[w]hile Ryu discloses manufacturing techniques, Ryu also describes and claims a ‘communication system’ with a smart card and a reader.” Reh’g Req. 9 (citing Ex. 1028, code (57), claims 1–2). Petitioner is correct in noting that Ryu’s disclosures are not so narrow as we described in the Decision. As to Finn-089, we found that reference unhelpful because it was “directed to a process for the contacting of a wire conductor in the course of manufacture of a transponder unit.” Dec. 41–42 (citing Ex. 1015, 1:15–17). Petitioner asserts that we failed to acknowledge to the fact that Finn-089 was incorporated by reference in the ’240 patent noting that “[p]atents incorporated by reference ‘are effectively part of the host [patents] as if [they] were explicitly contained therein.’” Reh’g Req. 9 (citing X2Y Attenuators, LLC v. U.S. Int’l Trade Comm’n, 757 F.3d 1358, 1362–63 (Fed. Cir. 2014) (alterations in Rehearing Request)). On this record, we agree that we overlooked and misapprehended the import of Ryu and Finn-089 and if those references are given appropriate weight, they lend further credence to Dr. van der Weide’s testimony that one of ordinary skill in the art would have known that an obvious way to manufacture Eray-WO799 would have created an intermediate product with requisite free ends. Further, we adopt the full reasoning stated in the Dissent as to the unpatentability of claim 3 (Dec. 53–57). Therefore, we GRANT Petitioner’s Request for Rehearing slip op. at 6
§ 103 obviousnessPatents in suitUS 9,165,240 - Stmicroelectronics, Inc. v. Monterey Research, LLCAll claims unpatentablePTAB · Jun 10, 2022 · IPR2021-01230 · APJ Kristen L Droesch · IPR · Final written decision
Claims 1–12 and 14 are unpatentable under §103 based on How-767 and Feild; the Board did not reach the other listed grounds.
RulingsFinal written decision- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“review. Paper 6 (“Institution Decision,” “Dec.”). Following institution, STMicroelectronics filed a petition for inter partes review and a Motion for Joinder in IPR2021-01230, requesting that STMicroelectronics be joined as a petitioner in IPR2021-00130. STMicroelectronics, Inc. v. Monterey Research, LLC, IPR2021-01230, Papers 1, 3. We instituted trial in IPR2021-01230, granted the Motion for Joinder, and added STMicroelectronics as a petitioner to IPR2021-00130. Id., Paper 7. A copy of that decision was entered in the record of IPR2021-00130. Paper 15.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“regarding the definition of a person of ordinary skill in the art. Accordingly, we again adopt Petitioner’s definition as it is consistent with the level of skill reflected by the ’625 Patent Specification and the asserted prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“claims 1 and 6 are limited to a flash memory; (2) the preamble of claim 10 is limited to a memory device; and (3) a “periphery area” is “an area outside the core memory cell area.” Accordingly, we adopt the parties’ construction that the preambles of claims 1 and 6 are limited to a flash memory, the preamble of claim 10 is limited to a memory device, and a “periphery area” is “an area outside the core memory cell area.” We do not need to further construe these claim terms in order to address the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 19
- Strike new argumentNew argument disregardedDecided for patent owner
“Petitioner’s Reply argument is not responsive to Patent Owner’s argument that a person of ordinary skill in the art would not have been motivated to integrate a standalone flash memory within an ASIC. See PO Resp. 75 (citing Ex. 2002, 53:25–54:3). Instead, Petitioner’s Reply arguments appear to proceed in a new direction with a new approach as compared to the positions advanced in the Petition. Accordingly, Petitioner’s new and non-responsive Reply arguments exceed the proper scope of a reply and have not been considered in rendering this Final Written Decision. See CTPG 73–74.” slip op. at 83
Patent outcomesUS 6,459,625 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 6,459,625 - Stmicroelectronics, Inc. v. Monterey Research, LLCAll claims unpatentablePTAB · Jun 10, 2022 · IPR2021-00130 · APJ Kristen L Droesch · IPR · Final written decision
Claims 1–12 and 14 are unpatentable under § 103 based on the grounds shown in the decision’s conclusion table.
RulingsFinal written decision- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“1 STMicroelectronics, Inc. was joined as a petitioner in this proceeding based on a petition and motion for joinder filed in IPR2021-01230, which were granted. These proceedings were terminated as to petitioner Qualcomm Incorporated. See Paper 37.” slip op. at 1
- Skill levelSkill level petitioner adoptedDecided for petitioner
“regarding the definition of a person of ordinary skill in the art. Accordingly, we again adopt Petitioner’s definition as it is consistent with the level of skill reflected by the ’625 Patent Specification and the asserted prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“claims 1 and 6 are limited to a flash memory; (2) the preamble of claim 10 is limited to a memory device; and (3) a “periphery area” is “an area outside the core memory cell area.” Accordingly, we adopt the parties’ construction that the preambles of claims 1 and 6 are limited to a flash memory, the preamble of claim 10 is limited to a memory device, and a “periphery area” is “an area outside the core memory cell area.” We do not need to further construe these claim terms in order to address the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“does not explain how any of the supposed advantages of Feild are relevant to How-767 or how the combination would achieve these supposed advantages. Petitioner identifies reducing fabrication steps, eliminating polishing steps, and high electromigration performance as benefits of Feild’s fabrication method. See Pet. 63 (citing Ex. 1011, 2:48–3:10; Ex. 1006 ¶ 149). Dr. Lall’s cited testimony identifies these advantages compared to the prior art techniques discussed in Feild that use additional polishing steps, multiple-step processing, and the use of chemical mechanical polishing. See Ex. 1006 ¶ 149 (citing Ex. 1011, 2:16–32, 2:20–30, 2:48–3:10). Petitioner also asserts that How-767 presents Figure 1 as an exemplary cross-sectional view of a generic integrated circuit and never suggests that the precise structure of Figure 1 is required. See Pet. 65 (citing Ex. 1003, 1:21–22). On this basis Petitioner contends that a person of ordinary skill in the art would have understood that other cross-sectional interconnection arrangements could be used. See id. (citing Ex. 1006 ¶ 152). Petitioner asserts that a person of ordinary skill in the art would have understood that forming How-767’s routing structure according to the interconnect structure taught by Feild would involve a simple substitution of Feild’s cross-sectional interconnect structure for How-767’s exemplary cross-sectional interconnect structure to obtain predictable results. See id. (citing Ex. 1006 ¶ 153). Accordingly, we understand that Feild’s advantages of reducing fabrication steps, eliminating polishing steps, and high electromigration performance would be achieved by forming How-767’s routing structure according to Feild’s cross-sectional interconnect structure. In sum, based on the entire trial record, we determine that Petitioner sets forth sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to modify How-767 by “forming How-767’s routing structure according to the interconnect structure taught by Feild” in order to obtain the advantages of reducing fabrication steps, eliminating polishing steps, and high electromigration performance. See Pet. 62–65 (citations omitted); KSR, 550 U.S. at 418.” slip op. at 76
Patent outcomesUS 6,459,625 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 6,459,625 - Apple Inc. v. Virnetx Inc.All claims unpatentablePTAB · Jul 29, 2015 · IPR2014-00483 · APJ Karl D Easthom · IPR · Final written decision
Claims 1, 7, 8, 10, 12, 13, 15, and 17 are unpatentable as anticipated by Provino; claims 2–5 and 18 are unpatentable as obvious over Provino with Kosiur and Xu, respectively.
RulingsFinal written decision- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Apple Incorporated (“Petitioner”) also filed a Petition (Paper 2) seeking an inter partes review of claims 1–5, 7, 8, 10, 12, 13, 15, 17, and 18 of the ’274 patent pursuant to 35 U.S.C. §§ 311–319 in Case IPR2014- 00483 (“’483 IPR”). Noting that Microsoft Corporation’s Petition and Apple Incorporated’s Petition were substantially identical in material aspects, the Board instituted an inter partes review of claims 1–5, 7, 8, 10, 12, 13, 15, 17, and 18, and joined IPR2014-00483 with IPR2014-00403 pursuant to 35 U.S.C. § 315(c). See ’483IPR, Paper 11, 6–9.2 Thereafter, pursuant to a settlement agreement, the present proceeding was terminated with respect to Microsoft Corporation only. Paper 38.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed petitioner constructionDisclaimer not foundDecided for petitioner
“proceeding somehow limits the claims here that Patent Owner otherwise could have moved to amend under a broadest reasonable construction, Patent Owner’s arguments were not “unambiguous,” and do not “call for the application of prosecution history disclaimer.” See PO Resp. 17–18. There was no “express disclaimer,” Bigio, 381 F.3d at 1325, or “unambiguous disavowal[],” Grober, 686 F.3d at 1341.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner
“As the latter two sentences show, the ’274 patent Specification describes placing field hopping data (i.e., an address hopping technique, see id. at 46:64–47:11), into a payload portion of a data packet. The Specification does not tie “tunneled” packets into a specific requirement that requires a change in formatting––above and apart from any protocol formatting or structural change that may happen to, or does, occur by placing one type of data field (header) into another type of data field (payload). After discussing the insertion of the field hopping data into the payload portion, the Specification then describes that these “modified message packets preferably conform to the UDP protocol,” or “[a]lternatively . . . can conform to the TCP/IP protocol or the ICPM protocol.” Id. at 50:30–35. In other words, if there is a change in a protocol in these disclosed examples––for example, from one protocol format to a UDP protocol format––any change appears to come in preferred embodiments and after the packets have been modified (i.e., tunneled). Accordingly, based on the foregoing discussion, we modify our construction as set forth in the Institution Decision, such that “tunnel packeting” means “placing data or information from one field, such as a header, into another packet field, such as a payload, wherein the two fields normally have different structures or formats, or placing data structured in one format within the format of another protocol.”” slip op. at 22
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“In any event, to the extent it is material, the ’274 patent Specification employs the term “user’s computer” in a “conventional scheme . . . shown in FIG 25. A user’s computer 2501 includes a client application 2504 (for example a web browser) . . . .” Ex. 1001, 38:61–63. Although Patent Owner refers to this “conventional” computer as “another embodiment,” the ’274 patent Specification disparages the “conventional architecture” that employs a user’s computer, because it is not secure enough. See Ex. 1001, 39:4–13; PO Resp. 21. In general, the ’274 patent Specification states that “[t]he present invention” involves a “client computer” with a “client application” that “communicates with a server.” See Ex. 1001, 7:40–44. This description of “[t]he present invention” does not mention a “user’s computer.” Therefore, the ’274 patent Specification does not repeatedly treat a “client computer” and a “user’s computer” as the same. The broadest reasonable construction of a client computer is a computer associated with a client.” slip op. at 23
Patent outcomesUS 7,987,274 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 7,987,274
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.