• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-00532 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–16 are unpatentable under § 103 over Warren, Warren and Dunn, Calderon and RepRap20208, and Calderon, RepRap20208, and Dunn.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “of ordinary skill in the art would have made the proposed combination in the manner asserted with a reasonable expectation of success. Weighing our underlying factual determinations, a preponderance of the evidence persuades us that claim 7 of the ’381 patent is unpatentable over Calderon, RepRap20208, and Dunn. Arctic Cat, 876 F.3d at 1361.” slip op. at 108

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). Whether a document qualifies as a printed publication is a legal conclusion based on underlying factual determinations. Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). slip op. at 69

  Patent outcomesUS 10,556,381 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,556,381
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Some claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00531 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–11 and 13–15 are unpatentable over the stated obviousness grounds; claim 12 was not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Petitioner filed a Petition (Paper 2, “Pet.”) requesting institution of an inter partes review of claims 1–15 of the ’698 patent. Discretionary denial of institution was determined to be not appropriate in this proceeding, and the proceeding was referred to the Board. Paper 10. Pursuant to 35 U.S.C. § 314, we instituted an inter partes review of claims 1–15 of the ’698 patent on all presented challenges. Paper 11 (“Inst. Dec.”), 15.” slip op. at 2

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Decision is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73 (2025). For the reasons that follow, we determine that Shenzhen Tuozhu Technology Co., Ltd. (“Petitioner”) has shown by a preponderance of the evidence that claims 1–11 and 13–15, but not claim 12, of U.S. Patent No. 9,168,698 B2 (Ex. 1001, “the ’698 patent”) are unpatentable.” slip op. at 2

  Patent outcomesUS 9,168,698 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,168,698
• Ajinomoto Co., Inc. v. Abtis Co., Ltd.No claims unpatentable
  PTAB · Aug 3, 2026 · IPR2025-00283 · APJ Lilan Ren · IPR · Final written decision

  The Board cancelled claim 11 and granted substitute claims 14–16, finding Petitioner had not shown those claims unpatentable on any asserted ground.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted

    “must determine whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. In that regard, Patent Owner bears the burden of persuasion to show that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter;” slip op. at 9

  • ExcludeMotion to exclude, deniedDenied

    “In this case, Patent Owner’s expert “Dr. Zhou signed the second declaration, stood behind its contents, and was available for cross-examination.” Paper 35, 4. Petitioner does not dispute this statement. Paper 39, 1. Petitioner does not identify any specific undue prejudice caused by Exhibit 2008. For example, Petitioner argues that “the failure to impress upon a witness that a statement is under oath goes to the heart of its reliability as evidence” and that “as the Board has recognized, hearsay is inherently unreliable” without specifying what statement in Exhibit 2008 lacks reliability. Paper 39, 4. Because Petitioner does not provide specific evidence of undue prejudice, we find Petitioner has suffered no such undue prejudice in this case. See Liquidia, 2021 WL 4860773 at *25. We therefore deny Petitioner’s Motion to Exclude on the basis of lack of authenticity. With regard to the assertion that Exhibit 2008 is hearsay, Petitioner objects to the exhibit because the testimony is based “on other informal and unpublished documents that are hearsay under FRE 802.” Paper 29, 1. Petitioner does not specify what such “informal and unpublished documents” are. See id. Federal Rule of Evidence 703 expressly states, “[a]n expert may base an opinion on fact or data in the case that the expert has been made aware of or personally observed.” The facts or data “need not be deny Petitioner’s Motion to Exclude on the basis of hearsay.” slip op. at 50

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable

    “Petitioner’s argument is unpersuasive. Paragraph 59 of the ’503 application describes formula 8-1 but does not support Petitioner’s argument that other unknown formulas may be included in the recited modified heavy chains. Ex. 2003 ¶ 59. Petitioner’s hypothesis that the recited heavy chains may (or may not) encompass unknown formulas is also inapposite to the written description inquiry before us — that is, whether the inventor was in possession of the subject matter recited in claims 14–16 based on the disclosure including formulas 8-1, 8-2, and 8-3. See PowerOasis, 522 F.3d at 1306.” slip op. at 14

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)EnabledNot shown unpatentable

    “These arguments in the Sur-Reply are unpersuasive to show a lack of enablement first and foremost because the arguments do not specifically provide evidence showing that any purported experimentation is undue. See Sur-Reply 2–8 (asserting, but without providing evidence under any specific Wands factors, that the examples and guidance in the specification do not extend to the broad scope of all antibodies); see Wands, 858 F.2d at 737. We again emphasize that the analysis of undue experimentation does not necessarily require every Wands factor to be explicitly addressed but the analysis must be based on “weighing many factual considerations” depending on the nature of the invention and underlying art. Cephalon, Inc. v. Watson Pharms., Inc., 707 F.3d 1330, 1336 (Fed. Cir. 2013). The assertion that the claim scope is broad alone does not suffice to show a lack of enablement based on the record before us. Moreover, as we note supra, Petitioner’s claim scope argument is based on the false premise that the scope of claims 14–16 is as broad as the claim term “antibody” without taking into account all other claim elements. For example, Petitioner does not disagree with Patent Owner’s statement that “[t]he ’675 Patent’s specification discloses the structural modification site, the chemistry used to modify that residue, and working examples demonstrating the modification” (Reply 2), but asserts only that “[t]he disclosure of SSFI that only binds to IgG1 Fc domains (SEQ ID NO:1) is . . . . inconsistent with the expansive scope of the claims.” Sur-Reply 5. Petitioner’s argument that the claims encompass proteins that lack a lysine reside at a 248 position improperly excludes from the claim language the “lysine residue at 248 position . . . [as] determined by the EU numbering system” that claims 14–16 require. As Dr. Zhou testifies, “each proposed lysine residue at position 248 (EU numbering) is covalently modified with a specific attachment with a terminal bio-orthogonal click-chemistry functional group. The specification describes targeted transfer of a chemical functional group to lysine 248” and when claims 14–16 are considered in their entirety, which includes all claim elements, “[a] POSA would understand the claim itself to limit the modified antibodies to those with lysine at position 248.” Ex. 2004 ¶ 48; Ex. 2008 ¶ 47. We also note that Patent Owner states “a POSA would understand that the phrase ‘one or more modified heavy chain’ encompasses antibodies within typical DAR distributions (i.e., fractional numbers) rather than requiring a distinct process for producing antibodies bearing modified heavy chains in exact integers.” Reply 2–3. Moreover, Patent Owner states that PepTalk Presentation demonstrates that “a POSA would understand antibody conjugation products to exist as mixtures rather than discrete whole number species” because PepTalk Presentation “presents DAR values as non-integer measurements, i.e. DARs of 1.8 and 1.9 reflecting such distributions.” Id. at 3 (citing Ex. 1007, 28). According to Patent Owner, “preparations having an average DAR of approximately 1.8 (commonly referred to in practice as ‘DAR2’) may reflect typical reaction distributions in which some antibodies contain two modified heavy chains while others contain fewer.” Id. at 3 (citing Ex. 2008 ¶ 46). Petitioner does not rebut these statements. See Sur-Reply 2–8. Based on the foregoing, the evidence before us does not show any” slip op. at 27

  Patent outcomesUS 11,896,675 not shown unpatentable
  § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 11,896,675
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 3, 2026 · IPR2025-00257 · APJ Lilan Ren · IPR · Final written decision

  Claims 1–15 are unpatentable because Petitioner proved by a preponderance of the evidence that the asserted § 103 grounds render them unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “proceeding, we determine Petitioner has proven by a preponderance of the evidence that each of claims 1–15 of the ’660 patent is unpatentable.” slip op. at 85

  Patent outcomesUS 9,592,660 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,592,660
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · May 13, 2026 · IPR2025-00032 · APJ Mitchell G Weatherly · IPR · Final written decision

  Claims 1–29 are unpatentable as obvious under §103 based on the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Petitioner submits that the ordinarily skilled artisan would have at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 30–32). Patent Owner “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For the purposes of our analysis below, we apply Petitioner’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’338 patent and the prior art.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that “amount of charge” reflects no express limitation on the manner of expressing the “amount” or the “charge.” And the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user may specify an “amount of 3 As recited in independent claims 10, 19, and 28 charge.” For example, the Specification describes that a user may specify an amount of charge by specifying a desired travel distance as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Ex. 1001, 19:49–57 (emphasis added). Therefore, “amount of charge” may also refer to a desired mileage or range. Figure 7 further demonstrates that a user may select “amount of charge” in terms of a “percent” or a “range” as shown in Petitioner’s annotated version of the pertinent portion of that figure as shown below.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree with Patent Owner. First, Patent Owner’s reliance on Wonderland as announcing a rule having broad effect is misplaced. Patent Owner contends that the “Federal Circuit has confirmed that where the primary reference already includes the function of the secondary reference, an allegation to incorporate that function into the primary reference is improper hindsight and no motivation to combine exists.” Id. at 29 (citing Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 988 F.Supp. 2d 479, 498–99 (W.D. Pa. 2013), aff'd, 644 F. App'x 1011 (Fed. Cir. 2016); citing Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed.Cir.2012))). Patent Owner’s citation to Wonderland does not support the proposition for which it is cited, namely that the Federal Circuit has “confirmed” that incorporating a function from a secondary reference into a primary reference is “improper hindsight” that precludes a motivation to combine teachings from the primary and secondary references. In Wonderland, the district court denied an accused infringer’s motion for summary judgment of invalidity, in part, due to its finding that genuine issues of material fact existed for the issue of whether sufficient motivation to combine prior art existed. Wonderland, 988 F. Supp. 2d at 511. The Wonderland decision does not constitute a final ruling on that issue, and the Federal Circuit’s summary affirmance of the final ruling by the district court does not address the issue or reflect how the issue was resolved at trial. Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Second, Petitioner also correctly points out that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2003, 54:8–55:9. Ferro also describes manual options for initiating charging, Ex. 1003¶ 146 (citing Ex. 1004 ¶ 109), and that an ordinarily skilled artisan would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without the user having to leave the vehicle, Ex. 1003 ¶¶ 151, 152. Accordingly, we find that Petitioner has established that an ordinarily skilled artisan would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” MCM Portfolio LLC v. Hewlett-Packard Co., 812 F.3d 1284, 1294 (Fed. Cir. 2015). Patent Owner’s argument fails to account for the level of skill and creativity of an ordinarily skilled artisan, who would have possessed a bachelor’s degree in engineering and could have easily accounted for the differences in scale depicted by Letendre’s and Donnelly’s controls. Ex. 1003 ¶¶ 247–249. Accordingly, we find that Petitioner’s showing on the motivation to combine teachings of Ferro, Donnelly, and Letendre to arrive at limitation 1h is persuasive. slip op. at 30

  Patent outcomesUS 11,563,338 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,563,338
• SAP America, Inc. v. Cyandia, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2024-01433 · APJ Jeffrey S Smith · IPR · Final written decision

  Claims 1–7, 10, 11, 13, 18, 19, 23, 29, 35, and 36 are unpatentable as obvious over the PCT Publication and Austin-Lane.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner asserts that a person of ordinary skill in the art at the time of filing “would have had a Bachelor’s degree in electrical engineering, computer science, or the like, and/or four or more years of experience in server-based applications” and that “[a]dditional experience may make up for a lack of education and vice versa.” PO Resp. 9. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the challenged patent and prior art, we adopt it and use “skilled artisans” to refer to people with such skill at the time the invention was filed. We do not perceive a substantive distinction between the parties’ definitions, but note that Petitioner’s definition provides more detail about the capabilities of skilled artisans. Also, the level of ordinary skill in the art can be evidenced by the references cited, and we find it commensurate with the cited references in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “device indicated by the session data” encompasses “determining a notification method based on” session data indicating the current state of the external device, where the current state of the device encompasses an online state as well as an offline state. See Pet. 53–54; Tr. 55:3–10 (The Board: “Are there any other states of an external device other than online or offline?” Patent Owner: “As far as I know, Your Honor, those are the only two[.]”), Tr. 65:24–66:1 (The Board: “When the claim says current state, they mean it’s online or offline?” Petitioner: “Correct.”), Tr. 20:23–21:8. The specification is consistent with the plain language of the claim in disclosing two examples of the claimed “current state,” namely, online and offline. Ex. 1101, 21:1–4. The specification discloses that the notification manager “queries session manager 456 to determine the user’s connectedness.” Id. at 21:6–8. The specification discloses that if the user is “online, notify by, for example, the user’s active session. If offline, notify by, for example, a txt [sic] message, call the user’s landline, call a friend of the user, and the like.” Id. at 21:1–4, 23:28–31.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Patent Owner’s expert witness, Dr. Goodrich, show written description support for providing a notification to an active external device, Patent Owner has not cited any portion of the 2009 Parent, nor any portion of the testimony of Dr. Goodrich, to show that the 2009 Parent provides written description support for determining a notification method by which to provide an alert to an external device based on the current state of the external device as offline. We highlight that Paragraphs 130 and 131 of the 2011 CIP Application disclose offline notification preferences for determining a notification method by which to provide an alert to an external device based on the current state of the external device as offline. Ex. 1110 ¶¶ 130–131. Specifically, paragraphs 130 and 131 describe that: the notification manager of the eventing and alerting subsystem 452 queries the configuration server 454 for the user's notification preferences and correlates these notification preferences with session manager 456 to determine the best notification method. That is, the notification manager queries the configuration server 454 and determines, for example, that the user has certain online notification preferences and certain offline notification preferences. If online, notify by, for example, the user's active session. If offline, notify by, for example, a txt message. . . . The notification manager of the eventing and alerting subsystem 452 then queries session manager 456 to determine the user's connectedness. Id. That is, if the user’s connectedness, or “current state” of the claimed external device, is offline, and the user’s offline notification preferences are “notify by txt message,” the notification manager will determine that the notification method for the external device having a current state of offline is by txt message. See id. Thus, the 2011 CIP Application describes a notification manager that queries a session manager to determine whether an external device is offline, and if the external device is offline, determines a notification method for providing an alert on the external device based on the current status of the external device as offline and the user’s offline notification preferences. Although we find this written description support for the determining limitation in the 2011 CIP Application, we do not find this written description support in the 2009 Parent.” slip op. at 25

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “As to the “determining a notification method” limitation (1.10), Petitioner asserts that Austin-Lane teaches determining: (1) the user device(s) to send the notification to (e.g., phone, PDA, notebook computer, desktop computer); (2) the communication protocol to use to send the notification, i.e., how to send the notification (e.g., SMTP (for email), SMS (for texts), HTTP (for web browsers)); and (3) the type of alert to provide, i.e., how to present the notification, (e.g., text, an icon, a pop-up window, a video, an email, an audible or tactile alarm), based on the current state of the at least one external device indicated by the session data (“presence information”), which may include whether and on which device(s) the user is online and/or whether and on which applications the user has an active session. Id. at 53 (internal citations omitted) (citing Ex. 1105 ¶¶ 4, 5, 29, 32, 33, 39, 46, 48, 61, 79, Fig. 1). We highlight that paragraph 61 of Austin-Lane discloses that: The type preferences 650 may include preferences for various notification types. . . . [A]uction alert #1 660 defines the following delivery precedence 663: (1) a web browser (if the user is online), (2) an IM client (if the user is online), (3) a mobile phone #1, (4) a PDA, (5) a mobile phone #2, (6) a pager, and (7) an email inbox. Ex. 1105 ¶ 61; see id. ¶¶ 74–77 (Describing that one of several notification methods for delivering an alert to a user’s device is determined based on the current state of the user’s device as online or offline). Thus, Austin-Lane describes determining a notification method by which to provide an alert on an external device based on the current state of the external device as online as well as offline.” slip op. at 29

  Patent outcomesUS 8,751,948 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips
  Patents in suitUS 8,751,948
• Adobe Inc. v. Jonathan E. JaffeNo claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01352 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–6 were not shown unpatentable under any asserted §103 ground because the references did not teach monitoring the physical coupling between the sensor and memory.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The Institution Decision adopted and applied Petitioner’s proposed level of ordinary skill because Petitioner’s “definition generally comports with the level of skill necessary to understand and implement the teachings” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “The parties present various claim construction arguments, disputing the meaning of three limitations recited in claim 1: “a sensor, which is tightly coupled to said memory”; “monitoring the integrity of the tight coupling between said memory and said sensor”; and “based on.” See Pet. 9–14; PO Resp. 5–12; Pet. Reply 4–9; PO Sur-reply 4–11. For purposes of this Decision, we do not need to discuss the construction of “based on.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As explained below, this Decision turns on whether Glass or Rieger discloses limitation [1c] reciting “monitoring the integrity of the tight coupling between said memory and said sensor.” Ex. 1001, 20:65–66; see infra §§ II.C.2, II.E.1, II.F. That limitation recites an element which overlaps with the earlier-recited limitation “a sensor, which is tightly coupled to said memory.” To reach our decision, we need only provide a limited discussion of two of the parties’ claim construction arguments. Our analysis follows.” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “said integrity is compromised, then also providing an indication of said compromised integrity.” Ex. 1001, 20:65–21:2. Although Petitioner points out that the limitation does not expressly recite “‘specifically’ monitoring the tight coupling” (Pet. Reply 8), the structure of the clause suggests that the tight coupling is specifically monitored. At a high level, the limitation is straightforward in its recitation that the integrity being monitored is “of the tight coupling” (Ex. 1001, 20:65–66 (emphasis added)), plainly suggesting that the tight coupling is specifically monitored. More granularly, breaking the relevant clause down to its grammatical parts, the clause recites a gerund (“monitoring”) acting on a direct object (“the integrity”) which is modified by a prepositional phrase (“of the tight coupling”). Notably, the object of the preposition (“of”) is “the tight coupling.” Altogether, this reads that the integrity being monitored is specifically of the tight coupling. Also, the claim recites that “if said integrity is compromised, then also providing an indication of said compromised integrity.” Therefore, from the claim language we know that the “integrity” of the tight coupling is something that may be “compromised,” which is consistent with Patent Owner’s proposed construction of determining whether the physical coupling has been “accessed or disturbed.” Petitioner’s interpretation effectively inserts additional language into the limitation such that the limitation includes monitoring the integrity of a device containing or surrounding the tight coupling, such as a camera (or camera housing), e.g., “monitoring the integrity of a camera that includes the tight coupling.” But, because the plain reading and the structure of the limitation reads that it is specifically the tight coupling’s integrity—not another physical structure, like a camera—which is being monitored, a monitored is not consistent with the language of the claim. See PO Resp. 9 (arguing that “Petitioner’s construction is improper because the claim language explicitly requires monitoring the physical coupling between the memory and the sensor as opposed to some third structure” (emphasis omitted)).” slip op. at 17

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “package 50 does not specifically monitor the integrity of the coupling between Glass’s sensor and the memory and, instead, argues that Glass detects tampering of all “the components and interconnections contained in that packaging,” e.g., control logic 44, cropper 46, compressor 47, MUX 45, code generator 48, and the various interconnections between those components. See Pet. Reply 16; Ex. 1005, 5:13–41. As explained above, we construe “monitoring the integrity of the tight coupling between said memory and said sensor” to mean determining whether the physical 7 Petitioner does not assert that a person of ordinary skill in the art would have been motivated to modify Glass’s device in any way; Petitioner solely argues that Glass teaches limitation [1c], based on Petitioner’s proposed claim construction. See Pet. 30–32 (“Glass discloses this limitation.”); Pet. Reply 16–17 (“Glass and Rieger disclose the ‘monitoring’ step.”). disturbed, which specifically requires monitoring the physical coupling between the sensor and the memory. See supra § II.C.2. As we agree with Patent Owner that this limitation requires monitoring the physical coupling between the sensor and the memory, monitoring Glass’s tamper resistant package 50 does not teach or disclose “monitoring the integrity of the tight coupling between said memory and said sensor.” Accordingly, we determine that Petitioner fails to show that Glass teaches or suggests [1c] monitoring the integrity of the tight coupling between said memory and said sensor when said at least one internal and unique parameter is generated, and, if said integrity is compromised, then also providing an indication of said compromised integrity, as required by claim 1. Consequently, we determine that Petitioner has not shown, by a preponderance of the evidence, that the subject matter of claim 1 would have been obvious over Glass.8” slip op. at 30

  Patent outcomesUS 6,757,828 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 6,757,828
• Biofrontera Inc. / Biofrontera Bioscience GmbH et al. v. Sun Pharmaceutical Industries, Inc.All claims unpatentable
  PTAB · Feb 23, 2026 · IPR2024-01312 · APJ Mary C Hoffman · IPR · Final written decision

  Claims 1, 2, 4–6, 16, 17, and 19–21 are unpatentable as obvious over Lundahl and Larsen; Ground 2 was conceded, and the motion to exclude was denied.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Patent Owner asserts that Petitioner has not provided a valid justification for requiring a POSITA to have both an engineering degree and a medical degree. Prelim. Resp. 22. We agree, insofar as Petitioner has not clearly set out any particular explanation or evidence in support of its dual-degree requirement. In all other respects, we note that the parties’ proposed definitions are largely similar. Because we determine that Patent Owner’s proposed definition is reasonable and consistent with the ’028 patent and the cited art, we adopt Patent Owner’s definition. In any event, our Decision does not turn on this level of skill determination. B.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “device “[f]or the treatment of large-area tissues,” such as the backs of human patients, wherein several applicators 13 are “flexibly connected to each other through hinges.” Id. (quoting Ex. 1004 ¶ 72). Petitioner asserts that a POSITA would have been motivated “to incorporate Larsen’s solution of connecting light applicators by hinges, to allow for adjustability of Lundahl’s device to provide the desired irradiance and irradiance uniformity to all target areas during PDT.” Id. (citing Ex. 1015 ¶ 127). According to Petitioner, a “POSITA would have had a reasonable expectation of success in combining Lundahl with Larsen, because both references describe similar illuminators for using light to treat conditions on a patient’s skin.” Id. at 31 (citing Ex. 1015 ¶ 128). Petitioner’s proposed modification of Lundahl also involves using LEDs as a light source instead of Lundahl’s fluorescent tubes. Id. According to Petitioner, a POSITA would have been motivated to make this change because: (1) LEDs had a lower cost and a longer lifetime than fluorescent tubes; (2) fluorescent tubes were known to have inconsistent light output within the tube itself; and (3) “the use of LEDs would be more practical to reduce spacing between light sources and the edges of the panels, as opposed to the bulky metal couplings at the end of fluorescent tubes, to reduce optical dead space across the light surface.” Id. (citing Ex. 1014, 4:41–42, 6:31–42; Ex. 1015 ¶ 129). Petitioner asserts that a POSITA would have had a reasonable expectation of success with this modification because Lundahl and Larsen “describe similar illuminators and the conversion from fluorescent tubes to LEDs was a routine practice prior to 2015.” Id. at 32 (citing Ex. 1015 ¶ 131). Patent Owner does not meaningfully dispute the Petitioner’s proposed reasons to combine Lundahl and Larsen. See generally PO Resp. To the extent Patent Owner argues that a POSITA would not have been motivated to make the combination because it would negatively affecting uniform illumination (PO Resp. 24), the motivating benefit here—using adjustable LED panels instead of monolith fluorescent tubes—outweighs the alleged disadvantages for the many reasons given by Petitioner, including greater adjustability and improved LED performance. See Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“[t]he fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify.”); Reply 14. We are persuaded that a POSITA would have been motivated to combine Lundahl and Larsen for the reasons advanced by Petitioner.” slip op. at 20

  • Obviousness (§103) › KSR rationalesMotivation foundDecided for petitioner

    “Patent Owner further argues that Petitioner’s reasoning (i.e., that it would have been obvious to try placing the hinges on the inner side surfaces) is unsupported and conclusory. PO Reps. 53–54. Patent Owner argues that Petitioner fails to identify a single prior art reference showing hinged structures on inner side surfaces. Id. This argument ignores that Larsen expressly identifies hinges on at least bottom side surfaces, and Petitioner merely proposes modifying their location from the bottom sides to inner sides. We find credible Dr. Grove’s testimony that relocating hinges would have been within the level of ordinary skill in the art. Ex. 1015 ¶ 155. Dr. Jokerst testifies that a POSITA would have been discouraged from placing hinges between Larsen’s adjustable applicators, because the hinges would create gaps that interfere with uniform illumination as well as the panels’ wiring, and create issues with the use and alignment of the panels. Ex. 2050 ¶ 175. However, a system with discrete panels connected by hinges (like in Larsen) will already have wiring, use and alignment technical challenges, regardless of the location of the hinges— the expected consequence of connecting multiple movable electronic panels. Moreover, the ’028 patent acknowledges in its discussion of conventional illuminators that placing hinges between panels was already known. Ex. 1001, 2:7–15. With respect to Dr. Jokerst’s opinion that the hinges would create gaps negatively affecting uniform illumination, we are persuaded that it would have been within the skill of a POSITA to locate the hinges on the inside surfaces “in a nearly flush arrangement,” such that the gaps would be minimized. Id.; Ex. 1015 ¶ 155. We also credit Dr. Grove’s supplemental testimony on this issue, directly refuting Dr. Jokerst’s testimony regarding gaps and uniform illumination (and therefore within the proper scope of reply, contrary to Patent Owner’s argument otherwise (Mot. 9). See Ex. 1026 ¶¶ 17–20 (explaining LED light divergence and that the physical space caused by hinges “is easily addressed” to maintain uniform illumination).9 We further point out that the ’028 patent also suggests that gaps do” slip op. at 24

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Dr. Jokerst testifies that a POSITA would have been discouraged from placing hinges between Larsen’s adjustable applicators, because the hinges would create gaps that interfere with uniform illumination as well as the panels’ wiring, and create issues with the use and alignment of the panels. Ex. 2050 ¶ 175. However, a system with discrete panels connected by hinges (like in Larsen) will already have wiring, use and alignment technical challenges, regardless of the location of the hinges— the expected consequence of connecting multiple movable electronic panels. Moreover, the ’028 patent acknowledges in its discussion of conventional illuminators that placing hinges between panels was already known. Ex. 1001, 2:7–15. With respect to Dr. Jokerst’s opinion that the hinges would create gaps negatively affecting uniform illumination, we are persuaded that it would have been within the skill of a POSITA to locate the hinges on the inside surfaces “in a nearly flush arrangement,” such that the gaps would be minimized. Id.; Ex. 1015 ¶ 155. We also credit Dr. Grove’s supplemental testimony on this issue, directly refuting Dr. Jokerst’s testimony regarding gaps and uniform illumination (and therefore within the proper scope of reply, contrary to Patent Owner’s argument otherwise (Mot. 9). See Ex. 1026 ¶¶ 17–20 (explaining LED light divergence and that the physical space caused by hinges “is easily addressed” to maintain uniform illumination).9” slip op. at 24

  Patent outcomesUS 11,697,028 unpatentable
  § 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,697,028

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.