- Infineon Technologies AG v. Amatech Group LimitedRehearing grantedPTAB · Apr 3, 2024 · IPR2022-00951 · APJ Stacey G White · IPR · Rehearing
On rehearing, the Board held claim 3 unpatentable as obvious over Eray-WO799, revising the final written decision’s outcome for that claim.
RulingsRehearing decision- RehearingRehearing, grantedGranted
“unrebutted expert testimony corroborated by two prior art patents describing RFID smart cards” and that this evidence “demonstrated that a conventional and obvious way to manufacture Eray-WO799’s smart card was by forming a card antenna on a card body before adding the chip.” Req. Reh’g 2 (citing Pet. 39–40; Paper 20 (“Reply”) at 31). Thus, Petitioner argues a person of ordinary skill in the art would have understood that an obvious and conventional way of manufacturing the card body of Eray- WO799 would have had unconnected ends as required by our construction. Id. Paragraph 149 of Dr. van der Weide’s declaration states that a person of ordinary skill in the art “would have understood that an obvious and conventional way to construct the smart card as shown in Eray-WO799 FIG. 12 would have been to form the turns S1, S2, SC3 and SC4 on or in the card body (e.g., by laying wire) before connecting the wire to (or forming) access terminals and connecting module M.” Ex. 1003 ¶ 149. In support of that because it was “directed to solving problems that occur during the manufacture of cards.” Dec. 42 (citing Ex. 1028, 1:25–2:53). Petitioner points out that “[w]hile Ryu discloses manufacturing techniques, Ryu also describes and claims a ‘communication system’ with a smart card and a reader.” Reh’g Req. 9 (citing Ex. 1028, code (57), claims 1–2). Petitioner is correct in noting that Ryu’s disclosures are not so narrow as we described in the Decision. As to Finn-089, we found that reference unhelpful because it was “directed to a process for the contacting of a wire conductor in the course of manufacture of a transponder unit.” Dec. 41–42 (citing Ex. 1015, 1:15–17). Petitioner asserts that we failed to acknowledge to the fact that Finn-089 was incorporated by reference in the ’240 patent noting that “[p]atents incorporated by reference ‘are effectively part of the host [patents] as if [they] were explicitly contained therein.’” Reh’g Req. 9 (citing X2Y Attenuators, LLC v. U.S. Int’l Trade Comm’n, 757 F.3d 1358, 1362–63 (Fed. Cir. 2014) (alterations in Rehearing Request)). On this record, we agree that we overlooked and misapprehended the import of Ryu and Finn-089 and if those references are given appropriate weight, they lend further credence to Dr. van der Weide’s testimony that one of ordinary skill in the art would have known that an obvious way to manufacture Eray-WO799 would have created an intermediate product with requisite free ends. Further, we adopt the full reasoning stated in the Dissent as to the unpatentability of claim 3 (Dec. 53–57). Therefore, we GRANT Petitioner’s Request for Rehearing slip op. at 6
- Skill levelSkill level petitioner adoptedOther
“As stated in our Final Written Decision, we adopted Petitioner’s definition of the person of ordinary skill in the art and found that the person of ordinary skill in the art would have possessed “a Bachelor’s degree in electrical engineering or a similar field, and 1–2 years of experience researching and developing antennas used in RFID applications.” Dec. 6–7 (citing Pet. 8; PO Resp. 18). Petitioner’s declarant, Dr. Daniel van der Weide, supported Petitioner’s definition, which was adopted for this proceeding. Ex. 1003 ¶ 25. Dr. van der Weide defined himself as “a person of more than ordinary skill in the art during the relevant timeframe” because “[b]y 2010, [he] held a Ph.D. in electrical engineering, and [he] had at least” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“unrebutted expert testimony corroborated by two prior art patents describing RFID smart cards” and that this evidence “demonstrated that a conventional and obvious way to manufacture Eray-WO799’s smart card was by forming a card antenna on a card body before adding the chip.” Req. Reh’g 2 (citing Pet. 39–40; Paper 20 (“Reply”) at 31). Thus, Petitioner argues a person of ordinary skill in the art would have understood that an obvious and conventional way of manufacturing the card body of Eray- WO799 would have had unconnected ends as required by our construction. Id. Paragraph 149 of Dr. van der Weide’s declaration states that a person of ordinary skill in the art “would have understood that an obvious and conventional way to construct the smart card as shown in Eray-WO799 FIG. 12 would have been to form the turns S1, S2, SC3 and SC4 on or in the card body (e.g., by laying wire) before connecting the wire to (or forming) access terminals and connecting module M.” Ex. 1003 ¶ 149. In support of that because it was “directed to solving problems that occur during the manufacture of cards.” Dec. 42 (citing Ex. 1028, 1:25–2:53). Petitioner points out that “[w]hile Ryu discloses manufacturing techniques, Ryu also describes and claims a ‘communication system’ with a smart card and a reader.” Reh’g Req. 9 (citing Ex. 1028, code (57), claims 1–2). Petitioner is correct in noting that Ryu’s disclosures are not so narrow as we described in the Decision. As to Finn-089, we found that reference unhelpful because it was “directed to a process for the contacting of a wire conductor in the course of manufacture of a transponder unit.” Dec. 41–42 (citing Ex. 1015, 1:15–17). Petitioner asserts that we failed to acknowledge to the fact that Finn-089 was incorporated by reference in the ’240 patent noting that “[p]atents incorporated by reference ‘are effectively part of the host [patents] as if [they] were explicitly contained therein.’” Reh’g Req. 9 (citing X2Y Attenuators, LLC v. U.S. Int’l Trade Comm’n, 757 F.3d 1358, 1362–63 (Fed. Cir. 2014) (alterations in Rehearing Request)). On this record, we agree that we overlooked and misapprehended the import of Ryu and Finn-089 and if those references are given appropriate weight, they lend further credence to Dr. van der Weide’s testimony that one of ordinary skill in the art would have known that an obvious way to manufacture Eray-WO799 would have created an intermediate product with requisite free ends. Further, we adopt the full reasoning stated in the Dissent as to the unpatentability of claim 3 (Dec. 53–57). Therefore, we GRANT Petitioner’s Request for Rehearing slip op. at 6
§ 103 obviousnessPatents in suitUS 9,165,240 - Eis GmbH v. Novoluto GmbHRehearing grantedPTAB · Sep 25, 2020 · IPR2020-00007 · APJ Susan L C Mitchell · IPR · Rehearing
Granted EIS GMBH’s rehearing request and instituted IPR of claims 1–3, 5, 7, 8, 11, 14, 15, 17–21, and 23–26 on all asserted grounds.
RulingsRehearing decision- RehearingRehearing, grantedGranted
“We find that Dr. Prisco’s testimony is a reasonable interpretation of how Taylor works if the bellows are bidirectional, and the bellows are expanded and contracted when the suction cup is sealingly engaged. Figure 3 of Taylor shown above appears to support Dr. Prisco’s testimony that the bellows may be expanded or contracted from the initial position shown in Figure 3 and does not appear to show any valve or second opening in the bellows to provide unidirectional flow as Dr. Jensen, Patent Owner’s declarant, asserts. Also, as Petitioner asserts, Taylor indicates that a squeeze ball may be substituted for the bellows expressly indicating a device with a bidirectional flow. Although Patent Owner raises valid arguments concerning a common definition of bellows indicating unidirectional flow and provides testimony from Dr. Jensen reasonably supporting such a position, these dueling positions create a genuine issue of material fact that we weigh in favor of Petitioner on institution. See 37 C.F.R. 42.108(c).” slip op. at 18
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We conclude from a review of Fang and Taylor that they are not substantially the same art nor is Petitioner making substantially the same argument as was presented the Office during prosecution of the ’061 Patent based on Fang. We find that the way in which Fang and Taylor work appear to be materially different. Fang appears to apply only suction to the skin whereas Taylor, with the sealingly connected suction cup, appears to apply a cyclical vacuum that Dr. Prisco testifies meets the claim limitations requiring generation of a pattern of negative and positive pressures, modulated with respect to a reference pressure. Ex. 1002 ¶¶ 62–64, 75. Thus Taylor appears to teach the claim element Patent Owner argued during prosecution was missing from Fang. Also, in applying factors (b) and (d) of Becton, Dickinson, because of such differences noted above, we find that Taylor is not cumulative of Fang, which was considered and applied by the Office during prosecution of the ’061 Patent. 4. Conclusion Thus, we find that Taylor and Fang are not substantially the same art, nor were substantially the same arguments based on these references presented in the Petition and during prosecution of the ’061 Patent, respectively. As discussed above, because Petitioner primarily relies on Taylor in all four grounds for teaching the modulation of positive and negative pressures with respect to a reference pressure as required by all of the challenged claims, we also find that, overall, the same or substantially the same art was not previously presented to the Office nor were the same or substantially the same arguments previously presented to the Office. Therefore, we do not need to reach the application of the remaining Becton, Dickenson factors relating to whether the Petitioner has demonstrated a material error by the Office. Thus, we decline to exercise our discretion under § 325(d) to deny institution of an inter partes review here.” slip op. at 12
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“how Taylor works if the bellows are bidirectional, and the bellows are expanded and contracted when the suction cup is sealingly engaged. Figure 3 of Taylor shown above appears to support Dr. Prisco’s testimony that the bellows may be expanded or contracted from the initial position shown in Figure 3 and does not appear to show any valve or second opening in the bellows to provide unidirectional flow as Dr. Jensen, Patent Owner’s declarant, asserts. Also, as Petitioner asserts, Taylor indicates that a squeeze ball may be substituted for the bellows expressly indicating a device with a bidirectional flow. Although Patent Owner raises valid arguments concerning a common definition of bellows indicating unidirectional flow and provides testimony from Dr. Jensen reasonably supporting such a position, these dueling positions create a genuine issue of material fact that we weigh in favor of Petitioner on institution. See 37 C.F.R. 42.108(c).” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We find that Dr. Prisco’s testimony is a reasonable interpretation of how Taylor works if the bellows are bidirectional, and the bellows are expanded and contracted when the suction cup is sealingly engaged. Figure 3 of Taylor shown above appears to support Dr. Prisco’s testimony that the bellows may be expanded or contracted from the initial position shown in Figure 3 and does not appear to show any valve or second opening in the bellows to provide unidirectional flow as Dr. Jensen, Patent Owner’s declarant, asserts. Also, as Petitioner asserts, Taylor indicates that a squeeze ball may be substituted for the bellows expressly indicating a device with a bidirectional flow. Although Patent Owner raises valid arguments concerning a common definition of bellows indicating unidirectional flow and provides testimony from Dr. Jensen reasonably supporting such a position, these dueling positions create a genuine issue of material fact that we weigh in favor of Petitioner on institution. See 37 C.F.R. 42.108(c).” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialPatents in suitUS 9,849,061 - Eis GmbH v. Novoluto GmbHRehearing grantedPTAB · Jun 17, 2020 · IPR2019-01302 · APJ John E Schneider · IPR · Rehearing
Granted rehearing and instituted inter partes review of claims 1–30 on all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Guan, Lee, and Hovland.
RulingsRehearing decision- RehearingRehearing, grantedGranted
“decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was addressed previously in a motion, an opposition, or a reply. Id. When rehearing a decision on a petition, we review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). “An abuse of discretion occurs if the decision (1) is clearly unreasonable, arbitrary, or fanciful; (2) is based on an erroneous conclusion of law; (3) rests on clearly erroneous fact findings; or (4) involves a record that contains no evidence on which the Board could rationally base its decision.” Redline Detection, LLC v. Star Envirotech, Inc., 811 F.3d 435, 442 (Fed. Cir. 2015). With this in mind, we address the arguments presented by Petitioner in turn.” slip op. at 3
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Request for Rehearing and conclude there are genuine issues of material fact about the teachings of Guan that warrant institution and resolution at trial.” slip op. at 2
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Patent Owner contends that Guan is non-analogous art in that it is not related to stimulation of the clitoris. Prelim. Resp. 59. Patent Owner also contends that there is no motivation to combine the teachings of Lee and Guan. Id. at 60–63. Patent Owner argues that one skilled in the art would not consider using the indirect stimulator of Guan in the dildo of Lee as it would require a modification of Lee beyond a simple substitution of elements. Id.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Petitioner has also provided a reasonable motivation to combine the teachings of Lee and Guan. Lee comprises a dildo with an extension which directly stimulates the clitoris, a body part. Ex. 1006, Fig. 1; Ex. 1002, ¶¶ 72, 134–137. Guan discloses an apparatus, which indirectly stimulates a body part. Ex. 1007, 3; Ex. 1002 ¶ 137. Given the teaching in the art of the problems with direct stimulation versus indirect stimulation, we agree on this record with Dr. Prisco that one skilled in the art would have had a reason to substitute the indirect stimulation device of Guan for the direct intensive and is best decided on a full record. Cf. Monark Knitting Mach, Corp. v. Sulzer Morat GmbH, 139 F.3d 877, 886 (Fed. Cir. 1998) (determining that issues of fact concerning secondary considerations precluded grant of summary judgment) reasonable expectation of success. Ex. 1002 ¶¶ 132–137.” slip op. at 6
§ 103 obviousnessPatents in suitUS 9,937,097
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.