• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Abbott Laboratories v. Miracor Medical SANo claims unpatentable
  PTAB · Jun 11, 2026 · IPR2025-00116 · APJ John D Hamann · IPR · Final written decision

  The Board held claims 1–5, 7, 10, 16–24, 26, and 28 not unpatentable under any of the four § 103 grounds because the petition failed to prove required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find that the ’077 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’077 patent is consistent with the definition of one of ordinary skill in the art proposed by Petitioner, which we adopt. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We further find that our determinations in this Decision would be the same if we were to instead adopt the level of skill proposed by Patent Owner.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner that “axially adjacent” should be given its plain and ordinary meaning of “adjacent to one another as measured along a central axis.” PO Resp. 5–6; see also Ex. 2015 ¶¶ 73–79 (Mr. Leschinsky addressing the claim term “axially adjacent” and explaining that a person of ordinary skill would have understood it to mean that the “first magnetic device and the rotor are ‘adjacent’ to one another, i.e., disposed next to one another, as measured along the central axis about which the rotor spins”). Patent Owner’s construction also is supported by Petitioner’s expert, Mr. Crosby, who agrees that “adjacent to one another as measured along a central axis,” could be “one meaning,” along with “many other meanings.” Ex. 2014,8 19:13–20:11. In sum, consistent with our Institution Decision, we conclude that the plain and ordinary meaning of “axially adjacent” is “at a position adjacent to one another as measured along a central axis.” See Dec. on Inst. 12.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Second, for the reasons below, we determine that we do not need to construe any other claim terms to resolve the disputes between the parties. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner. As we discuss above, we find “axially adjacent” to mean “adjacent to one another as measured along a central arguments that rest on Petitioner’s assertion that in the Parallel Litigation, Patent Owner “asserts that a magnetic element sealed within a rotor is . . . ‘axially adjacent.’” Id. at 20–21, n.6 (citing Ex. 1019, 5–7). In particular, we find unavailing Petitioner’s argument that Wampler teaches that magnetic pieces 88 (“a first magnetic device”) “are inserted [‘axially adjacent’] in…the impeller.” Id. at 20–21 (citing Ex. 1008 ¶ 80, Fig. 13; Ex. 1003 ¶ 174). We also find unavailing Petitioner’s reliance on Wampler’s Figure 13 and Mr. Crosby’s cited testimony that “the ‘impeller’ and ‘magnetic pieces’ are axially adjacent—situated next to each other on the same axis.” Id. at 21–22 (annotating Ex. 1008, Fig. 13; citing Ex. 1003 ¶¶ 174–176). Petitioner does not sufficiently explain this argument, but appears to conflate being adjacent along a central axis with about an axis. Id. We also find unavailing Petitioner’s argument that under Patent Owner’s construction, Wampler also teaches this limitation, because Patent Owner “concedes that ‘axially adjacent’ components ‘have positioning that is next to one another, perhaps touching or sharing a common side, when measured along the axis.’” Pet. Reply 14–15 (citing PO Resp. 14). Petitioner mischaracterizes Patent Owner’s arguments and ignores Patent Owner’s showing that “axially adjacent” components are “distinct from components that are aligned with one another such that they overlap or occupy the same portion of an axis upon which they are positioned.” PO Resp. 14 (citing Ex. 2015 ¶ 78). For the preceding reasons, Petitioner fails to show by a” slip op. at 24

  Patent outcomesUS 11,754,077 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,754,077
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Apr 29, 2026 · IPR2024-01493 · APJ John D Hamann · IPR · Final written decision

  Claims 1, 3, 5, 7–11, 14, and 15 are unpatentable as obvious; claims 2, 4, 6, 12, and 13 were not shown unpatentable because the references did not establish entirely crystallized CoFeB layers.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In our Decision on Institution, we adopted the definition Petitioner proposes for one having ordinary skill in the art at the time of the invention of the ’167 patent. Dec. on Inst. 6. Namely, we found that one of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Id. (citing Pet. 20 (citing Ex. 1024 ¶ 25)). We also found that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Id. Patent Owner does not address Petitioner’s definition, nor provide its own. See generally PO Resp. Because Petitioner’s definition of the level of skill in the art is consistent with the ’167 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC, 57 F.3d at 1579; In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Here, neither party sets forth any term for claim construction. Pet. 17; see generally PO Resp. Thus, for purposes of this Decision, we afford the claim terms their plain and ordinary meaning. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”)).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In addition, we agree with Petitioner and find that one of ordinary skill in the art “would have been motivated to replace either or both of Bowen’s electrodes with CoFeB to increase TMR and lower Hf [(coupling field)] and Hc [(coercivity)].” Pet. 24, 27; Ex. 1055,30 2270 (“[I]t is natural to replace both the free and pinned layers to CoFeB to further increase the TMR value.”); Ex. 105631 ¶¶ 67–68 (“[B]oth the ferromagnetic layers 5, 7 are made of an FeCoB”32 for “improvement of the TMR ratio.”); Ex. 1024 ¶¶ 129, 132. We credit Dr. Bokor’s cited testimony as it is consistent with the cited evidence. Moreover, as Petitioner explains, “[r]esearchers were . . . interested in optimizing MTJs to improve MRAM performance,” and “[h]igher TMRs long promised improved performance for MRAM.” Pet. 6 30 Dexin Wang et al., 70% TMR at room temperature for SDT sandwich junctions with CoFeB as free and reference layers, 40 IEEE Trans. Magn. 2269–71 (July 2004). 31 US 2004/0136232 A1, published July 15, 2004, to Hosomi. 32 We find persuasive Dr. Bokor’s testimony that “a skilled artisan [would have] understood that CoFeB and FeCoB refer to the same alloy.” Ex. 1024 ¶ 121. 36–44) (emphasis omitted). In addition, we agree with Petitioner that one of ordinary skill in the art “would have found it obvious to use Parkin’s CoFeB layer in place of Bowen’s electrodes to increase TMR” in light of Parkin’s explicit teachings. Pet. 27; Ex. 1024 ¶ 133. In particular, Parkin explicitly teaches that “very high TMR values are unexpectedly found for MTJs with highly textured (100) MgO tunnel barriers but with nominally amorphous storage layers.” Ex. 1062, 18:49–51. Notably, Parkin provides that “[t]he TMR of the device of F[igure] 3A is nearly two times higher than the highest TMR ever reported in prior art devices using conventional alumina tunnel barriers.” Id. at 18:63–65; Pet. 27. And as we discuss above, Parkin teaches that Figure 3A’s MTJ may be inverted, such that the storage layer is formed beneath the tunnel barrier. Ex. 1062, 17:7–10. In addition, we agree that one of ordinary skill in the art would have had a reasonable expectation of success in modifying Bowen in the manner Petitioner proposes, as forming electrodes with CoFeB alloys was known. Pet. 28. As Petitioner argues, “forming electrodes with CoFeB alloys in MTJs was known and had been successfully done,” and thus we are persuaded that “one of skill would have found it to be a straightforward, predictable, and desirable improvement to TMR, Hf, and Hc in Bowen’s” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We find unavailing Patent Owner’s arguments that Bowen teaches a “radically different manufacturing process[] from the claimed invention,” and that Bowen “went to heroic lengths to provide a crystalline (001) bottom electrode that provides a template for epitaxially growing a crystalline MgO(001) layer.” PO Resp. 2 (emphasis omitted). Patent Owner describes in detail Bowen’s specific manufacturing process, including the specific structure of the MTJ manufactured, and argues the claimed invention differs. PO Resp. 30–33. These arguments are inapposite. Petitioner cites the specific teachings Petitioner relies on from Bowen, rather than adopting the entirety of Bowen’s process or MTJ. See, e.g., Pet. 21–36 (citing the portions of Bowen—that in combination with Parkin—teach claim 1). Petitioner is not “compelled to adopt every single aspect of [Bowen’s] teaching without the exercise of independent judgment.” Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). We also find unavailing Patent Owner’s argument that Bowen and Parkin each teach away from Petitioner’s combination because Parkin used boron to avoid crystalline electrodes whereas Bowen tried to achieve perfect crystalline electrodes. PO Resp. 4. As we discuss above, one of ordinary skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB to increase TMR. And Patent Owner does not identify in either reference a specific teaching that criticizes, discredits, or otherwise 35 M. Jimbo et al., Thermal stability of spin valves using amorphous CoFeB, 165 J. Magnetism & Magnetic Materials 308–11 (1997) (“Jimbo”). combination. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004).” slip op. at 23

  Patent outcomesUS 10,680,167 mixed
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,680,167
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1No claims unpatentable
  PTAB · Apr 28, 2026 · IPR2024-01494 · APJ Justin T Arbes · IPR · Final written decision

  The Board found claims 5, 6, and 9–20 not shown unpatentable over either Bowen and Soukup or Nagahama and Soukup under § 103.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that at the time of the ’909 patent (2004), a person of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 18–19. In the Decision on Institution, we agreed with and applied Petitioner’s proposed definition. Dec. on Inst. 9. Patent Owner does not propose a different level of ordinary skill in the art in its Response. Both experts utilized Petitioner’s proposed definition. See Ex. 1024 ¶ 25; Ex. 2053 ¶¶ 29–30. Based on the full record developed during trial, including our review of the ’909 patent and the types of problems and solutions described in the ’909 patent and cited prior art, we maintain the previously adopted definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “B. Claim Interpretation We interpret the claims of the challenged patent using the same claim construction standard that would be used to construe the [claims] in a civil action under 35 U.S.C. 282(b), including construing the [claims] in accordance with the ordinary and customary meaning of such [claims] as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 15. We did not interpret any terms in the Decision on Institution. Dec. on Inst. 9–10. Patent Owner does not propose interpretations of any claim terms in its Response. We conclude, based on the full trial record, that no term requires express interpretation to determine whether Petitioner has met its burden to prove unpatentability of the challenged claims. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (emphasis added) (citation omitted)).” slip op. at 8

  • Strike new argumentNew argument disregardedGranted in part

    “Pursuant to 37 C.F.R. § 42.23(b), “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” Patent Trial and Appeal Board Trial Practice Guide § II.I, available at https://www.uspto.gov/patents/ptab/trial-practice-guide (last updated Dec. 12, 2025). “While replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered.” Id. An indication that a new issue is improperly raised in a reply is where a petitioner submits “new evidence necessary to make out a prima facie case” of unpatentability, such as a “newly raised rationale to combine the prior art references that was not expressed in the petition.” Id. That is the case here. Petitioner’s rationale in the Petition for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV based on Soukup was that such an artisan would have expected lowering the barrier height to increase TMR. See Pet. 34–36. Faced with Dr. Bokor’s testimony on cross-examination, Petitioner presents a new theory in its Reply that a person of ordinary skill in the art would not have known what impact lowering the barrier height would have (increase TMR, decrease it, or have no impact at all), but would have expected it to change in some “uncertain” way, which is a “legally sufficient motivation” in Petitioner’s view. See Reply 6–10, 13–16, 23–25. In other words, “[r]ather than explaining how its original” position that lowering barrier height would increase TMR “was correct,” Petitioner articulated “an entirely new theory . . . absent from the [P]etition” after Patent Owner cross-examined Dr. Bokor and “pointed out the flaws of [Petitioner’s] position” in its Response. See Wasica Finance GmbH v. Continental Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). “Shifting arguments in this fashion is foreclosed by statute, [Federal Circuit] precedent, and Board guidelines.” Id.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “Ultimately, the cross-examination testimony above is inconsistent with Dr. Bokor’s opinions in his declaration that, for example, “[i]t was understood to one of skill that lowering the barrier height to increase tunneling would have increased the TMR,” and “[o]ne of skill would have been motivated to adjust oxygen vacancy defects to improve TMR by lowering the barrier height.” See Ex. 1024 ¶¶ 176, 277 (emphasis added); see also id. ¶ 172 (“[O]ne of skill in the art would have been motivated to use [Soukup’s 0.33 eV] or similar height in an MgO MTJ to improve tunneling and hence TMR in Bowen.”). Accordingly, we do not find Dr. Bokor’s declaration testimony regarding a motivation to lower Bowen’s barrier height credible. It is Petitioner’s burden to provide a reasoned, evidence-supported explanation for why a person of ordinary skill in the art would have been motivated to lower Bowen’s 0.9 eV barrier height to 0.33 eV as disclosed in Soukup. See NuVasive, 842 F.3d at 1383; Magnum Oil, 829 F.3d at 1380; TriVascular, 812 F.3d at 1066. Petitioner’s reasoning in the Petition that lowering the barrier height (by introducing oxygen defects) would increase TMR is unsupported by evidence.” slip op. at 31

  Patent outcomesUS 11,968,909 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,968,909
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Mar 27, 2026 · IPR2024-01447 · APJ Sheila F Mcshane · IPR · Final written decision

  Claims 1–2 are unpatentable as obvious over each Bowen-based combination; claims 3–4 were not shown unpatentable, and the Nagahama-based grounds failed for all claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are 5 Nagahama, EP 1391942 A1, published February 25, 2004 (Ex. 1027, “Nagahama”). made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Consistent with the Institution Decision (Dec. 7), we adopt the assessment offered by Petitioner as it is consistent with the ’134 patent and the asserted prior art. Patent Owner does not dispute that Dr. Bokor is qualified as a person of ordinary skill in the art in accordance with the assessment adopted. See Tr. 90:9–15. Patent Owner, however, questions Dr. Bokor’s knowledge on the formation of crystalline materials and seeks to exclude his related testimony. See PO Resp. 1–2, 27; PO Mot. Excl. 12–15. We address this issue infra Section V.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner “submits the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 24. Patent Owner does not raise any claim construction issues in its Response. See generally PO Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Strike new argumentNew argument consideredDenied

    “A reply may only respond to arguments raised” in the patent owner response. 37 C.F.R § 42.23(b). The Consolidated Trial Practice Guide states that responding “does not mean proceed[ing] in a new direction with a new approach,” and “[w]hile replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered,” that is, “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Consolidated Trial Practice Guide § II.I (last updated Dec. 12, 2025) (“CTPG”), available at https://www.uspto.gov/patents/ptab/trial-practice-guide. We are not persuaded by Patent Owner’s assertions that Petitioner’s reply arguments on Parkin should not be considered. As discussed supra Section II.D.3.i above, the Petition includes the assertion that if Parkin’s CoFeB electrodes were used to modify Bowen, the MgO polycrystalline or single-crystal layer would still have the same 001 orientation. Pet. 33–34 (citing Ex. 1024 ¶ 129; Ex. 1062, 9:58–10:2, 18:49–51; Ex. 1005, 4:30–32). Petitioner’s support in the Petition references disclosures relating to Parkin’s Figure 3A (Ex. 1062, 18:49–51), which discloses a MgO(100) tunnel barrier, and the Petition also notes that the structure of Figure 3A may be inverted. Pet. 40 (citing Ex. 1062, 17:7–10). Patent Owner’s arguments, in large part, are related to Petitioner’s arguments in the Reply relating to Parkin’s Figure 11. Parkin’s Figure 11 is an embodiment where the structure of the devices of Figure 3A is inverted. See Ex. 1062, 22:29–33. We do not find that Petitioner’s arguments that are at issue in the Reply represent a new direction in its approach—the Petition is clearly based on the assertion that if Parkin’s CoFeB electrodes are used in Bowen, the device would have a MgO(001) tunnel barrier layer. Further, the Petition refers to Parkin’s disclosure that the device in Figure 3A may be inverted, which would be encompassed by the Figure 11 embodiment. Moreover, in the Institution Decision, we invited additional briefing on whether Parkin’s storage magnetic electrode was an amorphous ferromagnetic electrode, which relates to Parkin’s Figure 11 (Dec. 28–29). We are also not persuaded by Patent Owner’s argument that the Petition’s assertions do not correspond to what Petitioner argues in the Reply because they were referred to in the section pertaining to limitation 1[e]. The Petition includes a cross-reference in the limitation 1[d] discussion on the tunnel barrier layer limitation: “if Sunai’s or Parkin’s CoFeB electrodes are used as described in Claims 1[e] and 2 in this Ground, one of skill would understand that the MgO . . . would still have the same (001) orientation.” Pet. 33. Further, Petitioner’s arguments in its Reply properly respond to arguments made on contested issues. Patent Owner’s contentions on the merits in its Response are largely based upon the assertion that the modified MTJ of Bowen would not have a MgO(001) layer as claimed. See PO Resp. 4–10, 18–48. Petitioner’s reply arguments on Parkin relate to whether there would be a MgO(001) layer in its structure, so we find that Petitioner’s arguments on Parkin in its Reply (Pet. Reply 2–5) and the related evidence are appropriately responsive. slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We find that there is sufficient evidence in support of Petitioner’s assertion of the rationale to replace Bowen’s electrodes with CoFeB and anneal them. As discussed supra Section II.D.ii.2, Parkin’s Figure 11 depicts and describes a storage electrode that may be composed of amorphous CoFeB, with the formation of a MgO(001) barrier layer atop it. See Ex. 1062, 22:29–66. Patent Owner argues that Parkin’s benefits are because its CoFeB electrode is amorphous (PO Resp. 51–52), but this is not accurate. In Parkin, the CoFeB amorphous electrode crystallized at the interface layer between the barrier and the electrode. Id. at 19:6–19. Parkin discloses that higher TMRs were attributable to the crystallization of CoFeB. Id. at 18:63–19:22. Parkin also discloses that its completed CoFeB- MgOH(001)-CoFeB device was annealed with resulting high TMRs. Id. at 17:60–18:16. These disclosures provide support that one of skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB and anneal to crystallize them because of the known improvements of TMR. Additionally, Parkin’s disclosures support that the results of the combination would have been predictable. That is, Parkin actually discloses an amorphous CoFeB electrode, formation of a MgO(001) tunnel barrier on the amorphous electrode, and annealing the assembly, with a resulting high TMR. Accordingly, Petitioner has provided reasoning with rationale underpinning for the motivation to combine. See KSR, 550 U.S. at 415 (“[t]he combination of familiar elements according to known methods is likely to be obvious when it does no more than yield predictable results”).” slip op. at 31

  Patent outcomesUS 8,405,134 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,405,134
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Power2b, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2021-01266 · APJ John D Hamann · IPR · Remand

  On remand, the Board held claims 29, 36–38, 44–46, 48, 49, and 56–58 unpatentable as obvious over Reime, with additional grounds also supporting the challenged claims.

  RulingsRemand decision

  • ExcludeMotion to exclude, deniedDenied

    “In addition, Patent Owner filed a Motion to Exclude certain of Petitioner’s evidence (Paper 32) and Petitioner filed an Opposition (Paper 33). We denied this motion. See Final Dec. 58–61.” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “transmission paths. See Pet. Reply 14–15; PO Sur-reply 15. And we agree with both parties that the light that is transmitted directly through the plate to the sensor element does not have intervening reflections—such is consistent with the plain and ordinary meaning of “directly to.” See PO Resp. 31–32; Pet. Reply 14–15; PO Sur-reply 15. Nothing in claim 48’s language, however, requires that all of the reflected light be transmitted directly to the sensor element, which Patent Owner argues. Ex. 1001, 70:32–35; PO Resp. 31–32; PO Sur-reply 14–16. Rather, we agree with Petitioner that the claim language “merely requires that some light reflected by the object goes ‘directly to’ at least one sensor element once it is transmitted through the viewing plane defining plate.” Pet. Reply 14. We also agree that “none of these dependent claims purport to be exclusive of one another.” Id. at 15. Rather, claims 46–48 simply require some light be transmitted (or propagated) for their particular transmission path, without reciting all light. See Ex. 1001, 70:24–35.” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “We find Petitioner’s arguments based on Reime alone insufficient. Thus, we find that Petitioner does not show by a preponderance of the evidence that claim 49 is rendered obvious by Reime alone.” slip op. at 52

  • Obviousness (§103) › KSR rationalesUnpatentableUnpatentable

    “And in view of the above, we find persuasive Dr. Bederson’s testimony that “[c]hoosing a multi-element detector or a single-element detector would have been a simple design choice using commercially available detectors.” Ex. 1002 ¶ 117. Accordingly, we find that one of ordinary skill in the art would have found it obvious for Reime’s receivers to be implemented using discrete single-element detectors. See KSR, 550 U.S. at 417 (“When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp. If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense.”). We find unavailing Patent Owner’s argument that “Petitioner relies on expert testimony to gap-fill missing elements regarding Reime’s failure to disclose or suggest the different claim arrangements of detector elements in a ‘detector assembly.’” PO Resp. 78 (citing Ex. 1002 ¶¶ 111–119; Ex. 2056 ¶ 171). Rather, in light of Reime’s teachings, coupled with the general knowledge of one of ordinary skill in the art, it would have been obvious to employ discrete single-element detectors for Reime’s receivers. See Koninklijke Philips N.V. v. Google LLC, 948 F.3d 1330, 1338 (Fed. Cir. 2020) (finding obviousness can rely on supported expert testimony to supply an element of a claim). We appropriately consider such evidence of the knowledge that one of ordinary skill in the art would have had as part of our obviousness analysis. See Randall Mfg. v. Rea, 733 F.3d 1355, 1362–63 (Fed. Cir. 2013). Moreover, “AAPA can be important evidence of general background knowledge, and general knowledge can be used to supply a missing claim 1371, 1378–79 (Fed. Cir. 2025). Here, Petitioner relies on the cited AAPA as evidence of one of ordinary skill in the art’s general knowledge at the time of the ’093 patent, and the AAPA is not the basis for this ground. See Pet. 4, 42–43; Pet. Remand 4–5. As Shockwave Med. explains, Federal Circuit “case law has long recognized numerous permissible uses for general background knowledge in an IPR such as, ‘for example, furnishing a motivation to combine, or supplying a missing claim limitation.” 142 F.4th at 1378–79 (quoting Qualcomm Inc. v. Apple Inc., 24 F.4th 1367, 1376 (Fed. Cir. 2022) (citing Randall Mfg., 733 F.3d at 1362; Koninklijke, 948 F.3d at 1337–38)).” slip op. at 31

  Patent outcomesUS 9,569,093 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 9,569,093
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Power2b, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2021-01239 · APJ John D Hamann · IPR · Remand

  On remand, the Board held claims 17, 18, 21, 22, 26, and 30 unpatentable as obvious over Reime, with claims 17, 18, 21, 22, and 30 also obvious over Reime and Hinckley.

  RulingsRemand decision

  • ExcludeMotion to exclude, deniedDenied

    “In addition, Patent Owner filed a Motion to Exclude certain of Petitioner’s evidence (Paper 28) and Petitioner filed an Opposition (Paper 34). We denied this motion. See Paper 41, 47–50.” slip op. at 3

  • Skill levelSkill level board ownOther

    “one having ordinary skill in the art at the time of the invention of the ’850 patent: one who “would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and . . . years of experience in the research, design, development, and/or testing of touch and/or proximity sensors, human-machine interaction and 3 The Leahy-Smith America Invents Act (“AIA”) included revisions to 35 U.S.C. § 103 that became effective on March 16, 2013. Because the ’850 patent issued from an application filed before March 16, 2013, we apply the pre-AIA version of the statutory basis for unpatentability. 4 US 2003/0034439 A1, published Feb. 20, 2003 (Ex. 1010, “Reime”). 5 US 2002/0021278 A1, published Feb. 21, 2002 (Ex. 1011, “Hinckley”). Petitioner lists the combination of Reime and Hinckley as a separate asserted ground for claim 26. We combine these two asserted grounds into one as they rely on the same combination. additional education substituting for experience and vice versa.” Final Dec. 8–9. This definition for one having ordinary skill was not the subject of appeal, and we maintain it for purposes of this Final Written Decision on Remand. Moreover, it is consistent with the ’850 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “PO Resp. 17–29; Pet. Reply 8–15; PO Sur-reply 6–11. We construed this term in the Final Written Decision. Final Dec. 10–24. In particular, we concluded that (i) “detector assembly” means “two or more detector elements that detect electromagnetic radiation,” and (ii) a detector assembly is not required to be physically separate from (i.e., not interspersed with) a pixel array. Id. at 20, 22. The Federal Circuit found the first part of our construction erroneous. Appeal Dec. 7–10. In particular, the Federal Circuit concluded that “[t]he element.” Id. at 8. In addition, to guide the Board’s analysis on remand, the Federal Circuit construed “the terms ‘at an edge’ and ‘at least one edge’ [to] require a detector assembly to be arranged along one or more edges of a viewing plane defining plate.” Id. at 10–11. In other words, the Federal Circuit “clarif[ied] that arranging a detector assembly ‘at,’ ‘along,’ or ‘about’ ‘at least one edge’ or ‘an edge’ does not limit the detector assembly to being arranged entirely on ‘one edge.’” Id. at 12.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “the Federal Circuit already has concluded that claim 15 is obvious in view of Reime. Appeal Dec. 9–10. Claim 17 further recites “wherein the detector assembly comprises: a support substrate, and an arrangement of detector elements.” Ex. 1001, 67:15–18. We agree with Petitioner and find that Reime teaches these further limitations. Pet. 34–35; Pet. Remand 2–4; Pet. Resp. Remand 1–3. First, as we found in the Final Written Decision, Reime’s receivers 30 and 32 are two detector elements that detect electromagnetic radiation (i.e., light), and Reime’s receivers 30 and 32, collectively, comprise a detector assembly. Final Dec. 27–28 (citations omitted). Moreover, Reime’s two receivers 30 and 32 comprise a detector assembly having multiple detector elements (e.g., two receivers) to teach “an arrangement of detector elements.” Ex. 1010 ¶¶ 73, 86, Figs. 9A–9C; Ex. 2060,7 127:17–18; Pet. 32–33; Pet. Reply 20; Pet. Remand 3. In addition, as we found in the Final Written Decision, Reime teaches that each of receivers 30 and 32 are centered on opposite edges of the plate. 7 Deposition Transcript of Dr. Benjamin Bederson (Apr. 7, 2022). Ex. 1010, Fig. 6A, ¶ 82) (affirming that Reime teaches having one light receiver (e.g., 30 or 32) on each side of a four-sided touch pad). In further support, we agree with Petitioner and find that Reime teaches that receivers 30 and 32 “are mounted in the peripheral area surrounding the LCD 92.” Pet. 32–33; Ex. 1010 ¶ 86; see also id. at Figs. 9A–9C (showing that the receivers are positioned at the edge of the LCD screen); infra annotated Fig. 9E (showing receivers 30 and 32 along edges of the LCD). Accordingly, we find Reime’s detector assembly that comprises receivers 30 and 32 is arranged along two edges (one edge for each receiver) of the LCD, which meets the Federal Circuit’s construction for being arranged at at least one edge. See supra Section III (concluding “at least one edge” means “arranged along one or more edges”) (emphasis added).” slip op. at 12

  Patent outcomesUS 8,624,850 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,624,850
• Luxottica Of America Inc. v. E-Vision Optics, LLCSome claims unpatentable
  PTAB · Dec 23, 2025 · IPR2024-01030 · APJ Richard H Marschall · IPR · Final written decision

  Claims 1–20, 22–31, and 33–37 are unpatentable; claims 21 and 32 were not shown unpatentable, principally because the proposed combinations failed to establish motivation to combine or the required airtight seal.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We find that the proposals from the parties substantially overlap, such that it remains unclear whether any substantive difference exists. Notably, neither party argues that the minor differences in the proposals lead to a different outcome on any issues in this proceeding. Based on our review of the proposals, we apply Patent Owner’s proposal because it is consistent with the problems and solutions disclosed in the ’483 patent and prior art of record. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). The outcome of the issues addressed in this Decision would not change if we applied Petitioner’s proposal.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “hermetically sealed” module does not encompass waterproof modules that are not airtight. First, as Petitioner admits, as a general matter, “[s]omething that is hermetically sealed is sealed so as to be airtight.” Pet. 28 (citing Ex. 1002 ¶ 103; Ex. 1010, 269); PO Sur-reply 16. Petitioner later tries to argue that the specification puts a different spin on this meaning, but still acknowledges that “[o]utside the context of the ’483 patent, a hermetic seal is sometimes equated with an airtight seal.” See Pet. Post-hearing 2–3 (citing Ex. 1002 ¶ 103; Ex. 1010, 269). Based on our review of the record, the “ordinary meaning” of “hermetically sealed” means “airtight,” and, as noted above, “airtight” is not the same thing as “waterproof.” Second, the claims support Patent Owner’s position by including dependent claims that separately claim a “hermetically sealed” module (claims 13 and 32) and a “waterproof” module (claims 15 and 34), strongly suggesting that the terms have a different scope to avoid rendering some claims redundant. See Ex. 1001, 11: 65–66, 12:3–4, 12:52–53, 12:55–56. Petitioner argues in its Post-hearing brief that claims requiring waterproof modules are “a narrower species” of hermetic seal, but fails to explain how hermetic, airtight, and waterproof seals would not fall within the scope of both claims using its approach. Pet. Post-hearing Reply 2. Petitioner’s earlier argument in its Reply also seems to cut against this position by asserting that the specification “treats hermitically sealing as conventional and equivalent to waterproofing,” with different dependent claims directed to two allegedly “equivalent” terms making little sense. Pet. Reply 14 (emphasis added). The most natural reading of the claim language suggests that “hermetically sealed” means airtight, and does not encompass modules that are waterproof but not airtight. Third, while the specification does not define “hermetically sealed” and uses “waterproof” and “hermetically sealed” in similar contexts, it does not suggest that “hermetically sealed” does not require an airtight seal consistent with its ordinary meaning. See Pet. Reply 14–15 (citing Ex. 1001, 6:47–53, 9:15–18, 10:47–50). Instead, the specification states that hermetic seals prevent water from contacting electronics, which remains consistent with Patent Owner’s position because airtight hermetic seals are also waterproof. See Ex. 1001, 6:47–53, 9:15–18. The specification also states that “[t]he module preferably houses any of the aforementioned electrical components in a substantially water-proof and wear resistant/moisture resistant environment and is preferably hermetically sealed.” Id. at 10:47–50 (emphasis added). This passage supports Patent Owner’s position by suggesting that the preferable “hermetically sealed” module goes beyond mere water resistance. See PO Sur-reply 16–17. slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “2. Petitioner’s Anticipation Arguments and Evidence Petitioner argues that Howell-596 discloses every limitation of claims 1, 9, 10, 14, 15, and 18, and points to specific portions of Howell-596 and expert testimony to support its arguments. See Pet. 10–20 (citing Ex. 1002; Ex. 1003). We have reviewed the evidence and arguments of record and find that Petitioner has shown, by a preponderance of the evidence, that the limitations in claims 1, 9, 10, 14, 15, and 18 are disclosed by Howell-596 for the reasons set forth in the Petition, which we adopt as our own. See id.11 Accordingly, we find that Petitioner has established, by a preponderance of the evidence, that Howell-596 anticipates claims 1, 9, 10, 14, 15, and 18.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Based on these undisputed points and the parties’ arguments, we agree with Patent Owner that Petitioner fails to establish that a POSITA would have been motivated to locate Howell-596’s module housing 1700, which contains its UV detection system 1500, behind a user’s ear. Petitioner never squarely addresses the fact that placing Howell-596’s UV detection system behind a user’s ear would negatively impact its performance. Pet. 31–33; Pet. Reply 17–22. As a result, even if we accept Petitioner’s arguments and evidence as to the various advantages when placing electronics behind a user’s ear, it fails to establish a motivation to combine that requires placing Howell-596’s module housing 1700, and therefore its UV detection system, behind a user’s ear. Petitioner never acknowledges the readily apparent disadvantages of placing a UV detection system behind the ear, where it may not work at all. See Pet. 31–33. Nor does Petitioner argue that, in its combination, adjustments would be made to ensure accurate operation of Howell-596’s UV detection system. See id. Similarly, Petitioner notes that both Howell-596 and Howell-833 disclose UV sensors behind the ear of a user, but those teachings do not establish that placing Howell-596’s module behind the ear would ensure proper operation of its UV detection system housed within that module. See Pet. Reply 17–22. Instead, even though Howell-596 discloses a sensor behind the ear of a user, it maintains the UV detection system in a module toward the front of the temple, away from the ear. See id. at 18–19; PO Surreply 21–22; Ex. 1003 ¶ 205 (describing UV detection system 2102), Fig. 21 (showing UV detection system 2102 toward the front of the temple). Moreover, Petitioner’s reliance on the sensor placed behind the ear of the user in Howell-596 lacks weight because that sensor merely indicates that the device “is being worn by a user,” which serves a very different purpose than Howell-596’s UV detection system, which seeks to monitor a user’s exposure to UV radiation, a central purpose of Howell-596’s eyewear. See Ex. 1003 ¶ 205, code (57). Howell-833 also employs a UV sensor behind the ear, but Petitioner does not establish that it operates any differently than the “being worn” sensor in Howell-596, and therefore does not establish that Howell-596’s UV detection system would still work for its intended purposes in Petitioner’s proposed combination. See Pet. Reply 19–20.” slip op. at 29

  Patent outcomesUS 8,708,483 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,708,483
• Apple Inc. v. Apex Beam Technologies LLCInstituted
  PTAB · Dec 2, 2025 · IPR2025-00894 · APJ Scott A Daniels · IPR · Institution

  The Board instituted IPR on claims 1–20 and all petitioned grounds, finding a reasonable likelihood that Yeo and TS36 render at least claim 1 obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the arguments and evidence presented by Petitioner and Patent Owner, we are persuaded that Petitioner has demonstrated a reasonable likelihood that it would prevail in showing the unpatentability of at least one of the challenged claims. See 35 U.S.C. § 314(a). Accordingly, we institute an inter partes review of the challenged claims. slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art stating that “[f]or the purposes of this Preliminary Response only, Patent Owner utilizes Petitioner’s proposed level of skill in the art.” Prelim. Resp. 2. On this record, Petitioner’s proposed level of ordinary skill in the art is not disputed and is consistent with our review and understanding of the technology and descriptions in the ’767 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededNot reached

    “under 112(f) pointing out the respective functions and structure disclosed in the ’767 patent specification. Pet. 18–20. Patent Owner does not dispute the construction of these terms, stating only “that claim construction is not required to resolve any issues.” PO Resp. 2 (citing Pet. 18–20). Where there is no dispute and our Decision does not turn on any particular construction of these terms, we need not decide at this point whether “receiver module” and “transmitter module” invoke means-plus-function under 112(f). Pet. 13; Prelim. Resp. 5. And, because there is no dispute, we conclude that no express interpretation of any claim term is necessary to determine whether to institute an inter partes review in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the” slip op. at 10

  • BurdenInstituted

    “In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1889, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). slip op. at 8

  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,462,767

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.