- Yealink (USA) Network Technology Co., Ltd. / Yealink Network Technology Co., Ltd. v. Barco NVNo claims unpatentablePTAB · Oct 5, 2026 · IPR2025-00598 · APJ David C Mckone · IPR · Final written decision
Claims 1–31 were not shown unpatentable under either § 103 ground because the asserted combinations did not teach required claim limitations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“admissions by Patent Owner in litigation, contends that a person of ordinary skill in the art would have had “a Master of Science (M.S.) degree in electrical engineering or computer science, and five years of work experience in a related field” and that “[a]dditional educational experience could substitute for some of the work experience.” Pet. 5 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art (Petition, 5) at this time.” PO Resp. 6. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is uncontested and is consistent with the technology described in the ’347 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In the Preliminary Response, “Patent Owner accept[ed] the Petition’s claim construction.” Prelim. Resp. 6. However, in the Patent Owner Response, Patent Owner argues that “the claims of the ’347 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Based on the complete record, we do not find it necessary to provide express claim constructions of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Beel actually discloses the following: [0321] On the peripheral device 32 the video packets are received at the corresponding plug and play port, e.g. the USB port 11, read by the Human Interface Driver (HID) interface handler 13, unpacked to remove HID protocol headers in an unpacker 20 and then transmitted to the communications network by a transmitter 21. The network can be wireless for example WiFi or LiFi network. [0322] Having been routed over a communications network to the base unit 33, the incoming stream is read from the communications interface such as a WiFi access point 22, unpacked in an unpacker 25, decoded in a decoder 26 and then inserted into a suitable composition such as an OpenGL based composition in the compositor 29 for display on a central display device. Ex. 1005 ¶¶ 321–322 (emphasis added to portions quoted by Petitioner). Patent Owner notes that “[t]he Petition mistakenly cites to ¶ 322 of Beel but quotes ¶ 321.” PO Resp. 20 n.3. However, it appears that Petitioner has grafted together a portion of paragraph 321 that introduces peripheral device 32 with a portion of paragraph 322, which discusses features of base unit 33. However, this grafting has been done in such a way as to convey (incorrectly) that peripheral device 32, not base unit 33, includes unpacker 25, decoder 26, and compositor 29 that process the first processed video data received by the first peripheral device to generate second video data. Dr. Almeroth’s testimony, which copies Petitioner’s incorrectly altered quotation to paragraph 322 of Beel, is unreliable as to this claim limitation and is entitled to no weight.4 Thus, Petitioner has no expert testimony on which to rely for this claim limitation.” slip op. at 19
- Strike new argumentNew argument disregardedDecided for patent owner
“5 At the oral argument, when challenged on its reliance on paragraph 322, Petitioner argued that paragraph 321 of Beel teaches this limitation. Tr. 22:26–23:24. Petitioner did not make this argument in the Petition and, instead, raised it for the first time during oral argument; thus, it will not be considered. See Dell Inc. v. Acceleron, LLC, 884 F.3d 1364, 1369 (Fed. Cir. 2018) (“Unless it chose to exercise its waiver authority under 37 C.F.R. § 42.5(b), the Board was obligated to dismiss Dell’s untimely argument given that the untimely argument in this case was raised for the first time during oral argument.”). Even if we were to consider this new argument, it would not be persuasive. As Patent Owner observes (PO Resp. 20), any processing performed by peripheral device 32 in paragraph 321 is on data received from the processing device and destined for the base station via the network, rather than data flowing in the direction of the first processed video data of claim 1.” slip op. at 22
Patent outcomesUS 11,966,347 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,966,347 - Alliance Laundry Systems, LLC v. Payrange LLCSome claims unpatentablePTAB · Aug 19, 2026 · PGR2025-00027 · APJ George R Hoskins · PGR · Final written decision
Claims 1–6 and 8–20 are unpatentable under § 101; claim 7 was not shown unpatentable.
RulingsFinal written decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Pet.”) pursuant to 35 U.S.C. §§ 321–329 to institute a post-grant review of U.S. Patent No. 11,966,920 B2 (Ex. 1001, “the ’920 patent”), claims 1–20. We issued an Institution Decision (Paper 12) granting the petitioned review. slip op. at 2
- Skill levelOther
“B. Level of Ordinary Skill in the Art Petitioner contends a person having ordinary skill in the art pertaining” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“thereby supporting our conclusion that the plain and ordinary meaning of “affordance” in claim 1 refers to an interactive user interface element.” slip op. at 30
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“For the foregoing reasons, we conclude Petitioner’s reliance on Low’s” slip op. at 21
Patent outcomesUS 11,966,920 mixedClaim construction§ 101 eligibility§ 103 obviousnesscites Alice · Mayo · Bilski · Berkheimer · Enfish · Electric Power · KSRPatents in suitUS 11,966,920 - Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00167 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1–13, 21, 22, 64, and 65 are unpatentable over the asserted grounds; claims 15, 17, 19, 20, 23–30, 66, and 67 were not shown unpatentable over KR996, JP705, and Beltrami.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“B. Analysis “The moving party has the burden of proof to establish that it is” slip op. at 9
- Skill levelOther
“B. Level of Ordinary Skill in the Art We review the grounds of unpatentability in view of the” slip op. at 21
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownPrior construction adoptedDecided for petitioner
“lexicographical, we agree with the parties that “mainframe” is not limited to a single weldment. Pet. Init. CC Br. 1; PO Init. CC Br. 1–2. Instead, a single-weldment “mainframe” is merely one disclosed embodiment. See Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner
“probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 55
Patent outcomesUS 9,321,386 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,321,386 - Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00171 · APJ Eric C Jeschke · IPR · Final written decision
Claims 1–13 and 28 are unpatentable over KR996; claims 14–16 and 19–27 were not shown unpatentable over Bares and Beltrami.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“(“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”). Turning to the prosecution history, neither Petitioner nor Patent Owner has highlighted any specific statements that impact the scope of the term “mainframe.” And from our independent review, we do not discern any such statements. For these reasons, the intrinsic evidence as a whole supports construing “mainframe” as a primary supporting structure.” slip op. at 35
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusNot shown unpatentable
“probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 54
- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 28
Patent outcomesUS 10,202,266 mixedClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,202,266 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - BTL Industries, Inc. v. Inmode Ltd.No claims unpatentablePTAB · Oct 1, 2025 · IPR2024-00703 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1–58 were not shown unpatentable: the Edwards, Ingle, and Mosher combination fails to establish key limitations, and Ollivier was not shown to be a prior art printed publication.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“We apply Patent Owner’s proposed definition, as it appears consistent with the field of the ’511 patent and the prior art and is consistent with testimony of Dr. Poulos and the cross-examination testimony of Dr. Berenholz. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself); Ex. 2001 ¶¶ 35–39; Ex. 2005, 55:5–17, 57:17–58:19. In our view, however, Petitioner’s proposed definition is not so different that our decision would change if we were to apply Petitioner’s proposed definition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Patent Owner’s argument are persuasive. We agree with Patent Owner that a plain reading of the wherein clause requires the treating to begin at the introitus and extend at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. This construction is consistent with the ’511 patent’s Specification, which states: In typical embodiments, the length of the energy delivery element is about 1 to about 3 cm in length, in other embodiments it may be as long as about 4 cm. This is a length well adapted to treating the lower aspects of the vagina, wherein treatment by the method comprises contacting the vaginal epithelium in a region that extends from the introitus inward to a position about 3 to 4 cm inward from the introitus. In some embodiments of the invention, the method can b[e] practiced with a single row of parallel contract sites immediately inside the introitus. In other embodiments, the method may include deeper rows, or rows that overlap an initial row, while keeping the contact sites within the lower portion of the vagina. Ex. 1001, 3:28–40 (emphasis added); see also id. at 14:47–57. The ’511 patent Specification also states: “the portion of the vagina to be treated is a region between the introitus and a position located no further than about 3 to about 4 cm inward from the introitus.” Id. at 11:48–51 (emphasis added). Given the plain language of claim 1, consistent with the ’511 patent’s Specification, we construe “heating a portion of the vagina extending from the introitus inwardly to a location from 1 cm to 3.5 cm in from the introitus” to require heating a portion of the vagina beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus.” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Patent Owner’s arguments is persuasive. The cited portion of Mosher does not explicitly state the location of the treatment area. Ex. 1006 ¶ 74. In it Reply, Petitioner additionally points to paragraph 54 of Mosher, which states: “Preferably, the location of the treatment volume of endopelvic fascia will be disposed along a length of the urethra between the bladder neck and the external meatus so as to avoid injuring nerves.” Pet. Reply 14 (quoting Ex. 1006 ¶ 54). Petitioner argues that “[t]reating the vaginal wall adjacent to the mid-urethral region is within the claimed region of ‘from 1 cm to 3.5 cm in from the introitus.’” Pet. Reply 14–16. This, however, does not teach the claimed area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. The Petition fails to show that either Edwards or Mosher discloses heating a portion of the vagina beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. In its Reply, Petitioner argues that it would have been obvious to modify Edwards to treat the area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. See, e.g., Pet. Reply 2–4, 16–17 (citing Pet. 35). The Petition’s argument is unpersuasive because it is conclusory and does not adequately address Edwards’s use of a speculum. Pet. 35. The Petition includes no” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“In its Reply, Petitioner argues that it would have been obvious to modify Edwards to treat the area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. See, e.g., Pet. Reply 2–4, 16–17 (citing Pet. 35). The Petition’s argument is unpersuasive because it is conclusory and does not adequately address Edwards’s use of a speculum. Pet. 35. The Petition includes no persuasive explanation as to why it would have been obvious to modify Edwards to use the treatment blade without the speculum. See Pet. 22–24, 35–36. We determine that Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 1 is unpatentable over Edwards, Ingle, and Mosher.” slip op. at 26
Patent outcomesUS 8,961,511 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,961,511 - Hesai Technology Co., Ltd. v. Ouster, Inc.No claims unpatentablePTAB · Mar 13, 2025 · IPR2023-01422 · APJ Jon M Jurgovan · IPR · Final written decision
The Board held claims 1–2, 4–9, 11–14, 16–17, and 19–25 not shown unpatentable over the asserted obviousness grounds, principally because the combinations lacked claimed limitations.
RulingsFinal written decision- Skill levelSkill level board ownDecided for patent owner
“Considering the applicable factors in light of the parties’ contentions, we adopt the following level of ordinary skill in the art, which we apply in this Decision: A person of ordinary skill in the art would have had an undergraduate degree in mechanical or electrical engineering and two to three years of work experience with electro-optical and electro-mechanical devices or systems, relevant to light ranging systems. Less work experience would have been compensated by a higher level of education or vice versa. The work experience would have included at least one year relevant to light ranging systems including LIDAR with a rotor-stator structure. We determine that this level of skill is consistent with the problems and solutions identified in the ’515 patent and the prior art. See, e.g., Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001); Ex. 1001, 1:30–3:48; Ex. 1004 ¶¶ 3–10; Ex. 1005, 1:1–2:31; Ex. 1006, 1:1–2:60; Ex. 1007, 1. We also determine that the proposed level of skill is reflective of the education and experience a person of ordinary skill would have had. Ex. 1003 ¶¶ 39–41; Ex. 2004 ¶¶ 67–68.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“We determine that the claimed “stator circuit board” and “stator assembly” are separate and distinct elements in claims 1 and 14 because they are set forth as separate elements in these claims. See Ex. 1001, 48:27–29, 48:37–42, 50:8–10. Similarly, claim 22 recites “a stator circuit board assembly” that includes as subcomponents “a first circuit board,” “a second circuit board,” and a “stator assembly” which are separate and distinct subelements. Id. at 51:49–59. “Where a claim lists elements separately, ‘the clear implication of the claim language is that those elements are ‘distinct component[s]’ of the invention.” Becton, Dickinson and Co. v. Tyco Healthcare Gr., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (citing Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996)). This construction is confirmed by the ’515 patent’s specification. For example, the specification states that stator assembly 644 is affixed to circuit board 622, and, consistent with this statement, Figures 6A and 6D show them as separate elements joined together. Ex. 1001, 28:28–31, 30:16–24. Contrary to Petitioner’s contention, the specification’s stating that the stator elements are “built onto” or “integrated on” circuit boards (or assemblies containing them) does not mean that the stator assembly and circuit board are the same thing. Pet. Reply 1 (citing Ex. 1001, 4:19–22, 4:28–31). Rather, the specification describes the stator elements as part of the stator assembly which is coupled to a circuit board, as follows: VII. Integrated Electric Motor According to certain embodiments, an electric rotary motor can be integrated directly onto the circuit boards. The motor can have a "pancake" or "axial" design having a planar rotor assembly on a rotor board that opposes a planar stator assembly on an opposing stator board. The stator and rotor assemblies of the electric motor can be integrated onto the boards of the rotary actuator 608, i.e., the elements of the electric motor are one of many components on the surface of the printed circuit boards and thus a separate motor module is not required for LIDAR system 600. For example, referring back to FIG. 6D, stator assembly 644 can include an annular arrangement of multiple stator elements 644(i), e.g., vertically oriented solenoids (having their longitudinal axes perpendicular to the surface of the board) that are affixed (e.g., using an adhesive) to a board of the lower circuit board assembly 620 (e.g., board 622) or to a soft magnetic core that is then affixed to the lower circuit board assembly 620. Ex. 1001, 30:16–22. Thus, the ’515 patent’s specification expressly states that the stator elements of the stator assembly can be affixed to a printed circuit board, and thus the stator assembly is not the same thing as the board. Other parts of the specification are consistent with this view. See, e.g., id. at 4:54–57, 5:14–18, 6:50–53, 16:22–25.” slip op. at 23
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We have construed claim 1’s limitation 1(g) to require “stator circuit board” and “stator assembly” that are separate and distinct elements. See § III.C.1, supra. Johnson discloses coil windings that are formed by patterning interleaved structures in a multi-layered printed circuit board (PCB) forming the stator platform 330, and interconnecting them in groups with vias filled with conductive material. Ex. 1005, 11:66–13:57. Figs. 3C–3D; Ex. 2004 ¶¶ 138–139. We agree with Patent Owner that a POSITA would have considered the coil windings to be subcomponents of Johnson’s stator platform 330, which do not define a separate and distinct “stator assembly . . . coupled to a stator circuit board.” Ex. 2004 ¶ 139. In other words, the “printed” conductive tracks and traces would have been considered part of the PCB, not something separate. Id. Although Petitioner contends that Johnson discloses other embodiments in which a stator assembly is comprised of wires wound around a magnetic core (Pet. Reply 14–15 (citing Ex. 1005, 3:30–39, 4:56– 5:7; Ex. 1050 ¶ 30)), Petitioner does not show that Johnson discloses that those embodiments are coupled to a stator circuit board as recited in claim 1’s limitation 1(g). Petitioner did not rely on Pacala, Pardhan, nor Zhang to cover the deficiencies of Johnson. Accordingly, for the above reasons, we determine that Petitioner has” slip op. at 41
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner’s arguments are persuasive. Johnson, Pardhan, and Zhang all disclose transformer coils positioned inside of the rotor/stator elements of the motor. Specifically, Johnson’s Figure 3B shows a transformer coil 310b positioned inside rotor elements (magnets 320, 322, 324, 326), and Figure 3C shows the corresponding transformer coil (unnumbered) inside of the stator coils defined by conductive structures. Ex. 1005, 11:51–60, 13:26–40. Similarly, Pardhan shows in Figure 7B a transformer 740a, 740b positioned inside of rotor/stator elements 738a, 738b, and suggests that a smaller rotary transformer is desirable. Ex. 1006, 20:64–21:13. Likewise, Zhang’s Figures 2 and 3 show an electrical power transmission unit including first coupling coil (5) and second coupling coil (unnumbered) positioned inside of motor coil (2). Ex. 1007, 4–5. Against the teachings of Johnson, Pardhan, and Zhang, Petitioner argues that putting the transformer coils outside of the stator coils would have been an obvious design choice. Pet. 50–51, 54–55. However, as Patent Owner noted, “merely stating that a particular placement of an element is a design choice does not make it obvious.” PO Resp. 50 (citing Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1067–70, 1069 n.4 (Fed. Cir. 2018); Ex. 2004 ¶ 186). That Johnson, Pardhan, and Zhang all disclose the transformer coils inside of the rotor/stator elements of the motor suggests that there were good reasons for doing this in their configurations. Zhang expressly teaches that one such reason is to avoid interference with power transmission.15 Ex. 1007, 3. Thus, according to Zhang, moving transformer coils outside of the rotor/stator elements in Petitioner’s combination would undesirably interfere with power transmission such that a POSITA would not have pursued the combination. Accordingly, we find that claim 22’s limitation 22(h) is missing from the combination of Pacala, Johnson, Pardhan, and Zhang.” slip op. at 53
Patent outcomesUS 11,287,515 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,287,515 - Nike, Inc. v. Sherrywear LLCInstitutedPTAB · Feb 12, 2025 · IPR2024-01126 · APJ Jon M Jurgovan · IPR · Institution
The Board instituted review of claims 1–14 on all three obviousness grounds, finding a reasonable likelihood that claim 1 would have been obvious over Barg and Pintor.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“In evaluating arguments under § 325(d), we use a two-part framework to assess: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, Paper 6 at 8. In applying the two-part framework, we consider the non-exclusive factors set forth in Becton, Dickinson and Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 (PTAB Dec. 15, 2017) (precedential in relevant part) (“Becton, Dickinson”), which “provide useful insight into how to apply the framework” under § 325(d). Advanced Bionics, Paper 6 at 9. Those non-exclusive factors include: (a) the similarities and material differences between the asserted art and the prior art involved during examination; (b) the cumulative nature of the asserted art and the prior art evaluated during examination; (c) the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for rejection; (d) the extent of the overlap between the arguments made during examination and the manner in which Petitioner relies on the prior art or Patent Owner distinguishes the prior art; (e) whether Petitioner has pointed out sufficiently how the Examiner erred in its evaluation of the asserted prior art; and (f) the extent to which additional evidence and facts presented in the Petition warrant reconsideration of the prior art or arguments. Becton, Dickinson, Paper 8 at 17–18. “If, after review of factors (a), (b), and (d), it is determined that the same or substantially the same art or arguments previously were presented to the Office, then factors (c), (e), and (f) relate to whether the petitioner has demonstrated a material error by the Office.” Advanced Bionics, IPR2019-01469, Paper 6 at 10.4” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“(xiii) Conclusion for Claim 1 Based on the evidence and arguments of record at this stage of the proceeding, we determine that Petitioner has shown that each element of claim 1 of the ’550 patent is disclosed by the combination of Barg and Pintor. Since Petitioner did not assert that Pintor discloses any limitation of claim 1, we determined that Petitioner did not need to establish a motivation to combine Pintor or reasonable expectation of success in doing so for claim 1. Lastly, Patent Owner’s objective indicia did not relate to claim 1. Accordingly, Petitioner has shown a reasonable likelihood that claim 1 would have been obvious over the combination of Barg and Pintor.” slip op. at 41
- Skill levelSkill level petitioner adoptedOther
“Petitioner asserts the following: A POSA9 at the relevant time would have had at least two years of experience working in the design and or/construction of women’s exercise apparel, intimate apparel, and/or sports bras and bras, specifically. . . . Formal education in a relevant field, such as fashion and textile design, may compensate for less experience. Id. Pet. 24 (citing Ex. 1001 ¶ 155). Patent Owner does not address Petitioner’s proposed level of ordinary skill in the art. See generally Prelim. Resp. Petitioner’s proposed level of skill in the art is consistent with the ’550 patent and the asserted prior art except that we set the level to “two . . . years of experience” because the qualifier “at least two” may render the level ambiguous. Otherwise, we agree with and will use Petitioner’s proposed level for this Institution Decision.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither Petitioner nor Patent Owner propose any construction for any claim term in this proceeding. Accordingly, we apply the ordinary and customary meaning to the claim terms without special construction.” slip op. at 21
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 10,219,550 - PTAB · Jan 21, 2025 · IPR2023-01458 · APJ Meredith C Petravick · IPR · Remand
On remand, the Board denied institution because the petition failed to show a reasonable likelihood that any challenged claim was unpatentable, including over Hall and Borowski.
RulingsRemand decision- RemandOther
“We entered a first Decision Denying Institution of Inter Partes Review (Paper 8), and Petitioner filed a Request for Director Review (Paper 13). The former Director of the United States Patent and Trademark Office vacated our denial of institution and remanded for further proceedings consistent with the former Director’s decision. Paper 14. After considering the Petition, the Preliminary Response, the Director’s Review Decision, and the post Director’s Review Supplemental Briefing (Papers 16 and 17), and the evidence of record, we determine the information presented fails to show a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’236 patent.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“After considering the Petition, the Preliminary Response, the Director’s Review Decision, and the post Director’s Review Supplemental Briefing (Papers 16 and 17), and the evidence of record, we determine the information presented fails to show a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’236 patent. Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Accordingly, we do not institute an inter partes review of the ’236 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts: “A [person of ordinary skill in the art (‘POSITA’)] as of August 24, 2016 would have had an undergraduate degree in mechanical engineering, electrical engineering, or physics, and two to three years of experience in LiDAR design.” Pet. 9 (citing Ex. 1003 ¶¶ 59–64). Patent Owner does not dispute Petitioner’s definition of a POSITA. Prelim. Resp. 9. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it is consistent with the ’236 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“37 C.F.R. § 42.100(b). In applying this standard, we generally give claim terms their ordinary and customary meaning as would be understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. See id.; Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir. 2005) (en banc). We do not need to construe any terms explicitly to reach our decision. See Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); see also Pet. 10 (“[N]o formal constructions are necessary.”); Prelim. Resp. 10 (“[N]o formal constructions are necessary.”).” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,422,236
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.