- Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentablePTAB · Jan 16, 2026 · IPR2022-00572 · APJ Jeffrey S Smith · IPR · Remand
Claims 1–4 and 6 are unpatentable under §103 because the prior-art combinations teach the limitations at issue under the Federal Circuit’s construction of “style.”
RulingsRemand decision- RemandDecided for petitioner
“We agree with Petitioner. Lemay Web discloses that the style settings of width, height, pause, and repeat for the pocket watch images can be changed by changing the values for width, height, pause, and repeat in the HTML file. Ex. 1004, 89–90. This results in changing the size, duration, and frequency of the display of the multiple pocket watch image objects without changing the image files or the Java applet. Id. That is, the 12 image objects of Lemay Web can be uniformly formatted by applying and altering the style settings of the HTML file, which is stored separately from the image objects and the Java applet. Id. at 88– 89. In our Final Written Decision, we wrote that “Lemay Web discloses that the image files that are displayed as the animation object are separate from the HTML.” Ex. 1004, 88–89.” Dec. 22. The Federal Circuit wrote that “how the Board evaluated what constitutes separateness in the prior art software is less than clear.” Opinion, 13 n.7. To be clear, the animation of Lemay Web comprises 12 different pocket watch image objects. Ex. 1004, 89. The HTML file that contains the style settings for the 12 different pocket watch image objects is stored separately from the 12 different pocket watch image objects. Id. at 88–91. The style of the 12 different pocket watch image objects can be altered by changing the values of the style settings in the separate HTML file, thus allowing the style to be uniformly applied to each of the associated 12 pocket watch image objects when the pocket watch image objects are created on the web page. Id.; see Ex. 1030 ¶¶ 28–29; Dec. 21–22. In conclusion for issue (B), we find that Lemay Web teaches applying the style located in the separate HTML file to the pocket watch image objects when creating the pocket watch image objects on the web page. Therefore, Lemay Web’s style is “defined separately from any single object” as claimed. Because Lemay Web’s style can be applied to one object and more than one object and Lemay Web’s style is defined separately from any single object, we find that the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style.”” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 9
- Expert testimonyPetitioner expert creditedDecided for petitioner
“What you see in the bottom right is an excerpt from the Lemay Web book . . . [y]ou can still use the Java applet just by putting this applet code into your HTML file. So this shows the animator class is going to be run within height or how big a window within the browser should be allocated in this applet. You can . . . tell the animator class how long to pause in between each image. So that’s a style that’s being applied to all of the multiple images that make up this animation. Ex. 2029, 746:23–747:7. Patent Owner then asked GoDaddy’s expert “for each unique animation you want to create with this animator class that’s shown here, you’re going to have to have a unique set of HTML code with the settings along with any of the images you’ll want to associate with the animator class, right?” Ex. 2030, 793:7–11. GoDaddy’s expert testified, with reference to Exhibit 2027, 80, that “Yeah. I’m not a hundred percent sure I understand your question, but yes, if you had six animations on a page, for example, you’d have six blocks of markup that looked like the markup at the bottom right of that slide, starting with applet.” Id. at 793:12–16. In addressing Patent Owner’s question about “each unique animation,” GoDaddy’s expert provided a hypothetical example of a web page having six animations, and explained that the six animations have six blocks of markup. Ex. 2030, 793:13–16. We find that this testimony means that if a web page has six unique animations, then for each unique animation, a corresponding HTML file contains the style settings for the image objects of that animation, such that the “six animations on a page . . . have six blocks of markup.” Id. We find that the subsequent testimony of GoDaddy’s expert cited by Patent Owner is consistent with the expert’s initial testimony that Lemay Web’s style is “applied to all of the multiple images that make up this animation.” Ex. 2029, 747:5–7. We also find that the subsequent testimony is consistent with and supported by the disclosure of Lemay Web, which teaches that an animation has a set of image files and is added to a Web page using the Animator applet. Ex. 1004, 88 (“[Y]ou’ll learn just enough about Java applets to set up animation on your Web page. . . . To create animation using Java and the Animator applet, you’ll need . . . [a] set of image files . . . that make up your animation.”); see id. at 88–91. That is, Lemay Web, consistent with the testimony of GoDaddy’s expert, discloses that the style settings for the animation of the pocket watch in the HTML file are uniformly applied to the 12 pocket watch image objects. Id. at 88–91.” slip op. at 17
Patent outcomesUS 7,594,168 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 7,594,168 - Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentablePTAB · Jan 16, 2026 · IPR2022-00597 · APJ Jeffrey S Smith · IPR · Remand
Claims 1–4 and 6 are unpatentable under §103 over both listed prior art combinations; Lemay Web teaches the claimed style under the Federal Circuit’s construction.
RulingsRemand decision- RemandOther
“As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“We agree with Petitioner. As discussed above, the plain meaning of an “image object” read in light of the Specification encompasses data that defines an image, such as each of the 12 different pocket watch images of Lemay Web. Ex. 1004, 89–90. Therefore, the HTML file of Lemay Web, which specifies attributes including width, height, pause value, and repeat value of the pocket watch image objects, is “capable of being applied to more than one” image object, such as each of the 12 different pocket watch image objects described by Lemay Web. Id.” slip op. at 11
- Strike new argumentNew argument consideredDecided for petitioner
“We agree with Petitioner. The Board and Petitioner understood the meaning of “or” in the phrase “one or more objects” in Patent Owner’s proposed construction of style as meaning that “a style . . . can be associated with just one object.” Dec. 22; see Reply 4–5. The Federal Circuit “ultimately conclude[d] that Express Mobile’s proposed construction, with ‘or’ properly interpreted,” means “that the claimed ‘style’ must be capable of being applied to both one and more than one ‘object,’” and “remand[ed] for further proceedings in view of the correct claim construction.” Remand Opinion 13. In doing so, the Federal Circuit stated that “[i]t may be that under the correct claim construction, the Board finds that Lemay Web teaches the claimed ‘style’; however, that is still an open fact question for the Board to decide in the first instance.” Id. at n.6. Given that the Federal Circuit has ordered the Board to determine whether the prior art teaches the claimed “style” under the proper construction, we find that Petitioner’s arguments on this issue are timely.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“Contrary to Patent Owner’s contention, the Specification discloses, “Data that defines text button, image, paragraph, or other parent objects . . . can be stored in two-dimensional arrays (by web page and by object number).” Ex. 1001, 22:11–13 (emphasis added). The Specification further discloses that “objects . . . include colors, fonts, images, audio clips, video clips, text areas, URLs and thread objects.” Id. at 2:16–17 (emphasis added); see id. at 8:40. We highlight that the Specification’s use of “object” is consistent with a definition of “object” in the computing art at the time of the invention, which is “(2) A passive entity that contains or receives data; for example, bytes, blocks, clocks fields, files . . . .” George McDaniel, IBM Dictionary of Computing, McGraw-Hill, Inc. 1994, p. 471 (Ex. 3001). Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 8
Patent outcomesUS 7,594,168 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 7,594,168 - PTAB · Jan 14, 2026 · PGR2025-00059 · APJ Devon Zastrow Newman · PGR · Institution
The Board instituted post-grant review of claims 1–4 on all four asserted grounds, finding a sufficient preliminary showing of obviousness and lack of enablement.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“V. CONCLUSION Petitioner has, at this stage, established that it will more likely than not prevail in showing that at least one of the challenged claims is unpatentable. This determination is, however, based on a preliminary record and is not final on any issues of patentability. We will make a final determination on the patentability of the challenged claims, as necessary and applying the preponderance of the evidence standard, based on a fully developed record through trial. VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that, pursuant to 35 U.S.C. § 324(a) post grant review of claims 1–4 of the ’233 patent is hereby instituted on the grounds set forth in the Petition, commencing on the entry date of this Order, and pursuant to 35 U.S.C. § 324(d) and 37 C.F.R. § 42.4, notice is hereby given of the institution of a trial; and” slip op. at 40
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not proffer a description of a POSA. See generally, Prelim. Resp. For the purposes of this decision, on the record at this time, we find that Petitioner’s definition appears consistent with the level of skill shown in the prior art references of record, and apply it herein. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). We invite the parties to further address the definition of a POSA during trial should they find it necessary.” slip op. at 7
- Expert testimonyPetitioner expert discountedDecided for patent owner
“In addition, the opinion stated in the Pomper Declaration that “the term of ‘low molecular weight’ is well accepted in the chemical arts” and the declarant “recognize[s] that low molecular weight compounds would have a molecular weight of typically from about 50 Daltons to about 1,500 Daltons” is offered by a co-inventor. We, as factfinder, have discretion to weigh the credibility of expert witnesses and to give each item of evidence such weight as appropriate. See In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). In this case, we find that the published references on metabolites do not support the opinion. In re Am. Acad. of Sci. Tech Ctr., 367 F.3d at 1368 (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”) US-121, of which Dr. Pomper is lead inventor, also uses the term “low molecular weight”—without further characterization of the term—and is uninformative as to the meaning of the term. See Ex. 1006, ¶ 12. In addition, Patent Owner’s definition does not appear to apply to all compounds claimed in US-121.5” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“limited to Patent Owner’s proposed “from about 50 Daltons to about 1,500 Daltons.” The cited evidence relied on in the Pomper Declaration to define “low molecular weight” as a term well accepted in the chemical arts relates to metabolomics and metabolites. See Ex. 1002, 169, (specifically, ¶ 17 of Dr. Pomper’s declaration). Patent Owner admits that Dr. Pomper’s testimony is about molecules that differ from the claimed imaging and radiotherapeutic agents targeting FAP-α, but argues that the testimony is still relevant for purposes of explanation. Prelim Resp. 21. While it may be relevant, the testimony is not persuasive in light of the Specification. We find the uncontested fact that several of the B moieties alone—without the A moiety or L linker—specifically identified in the ’233 patent fall outside of Patent Owner’s proposed definition persuasive, as we normally do not interpret claim terms in a way that excludes examples disclosed in the specification. See, e.g., Verizon Servs. Corp. v. Vonage Holdings Corp., 503 F.3d 1295, 1305 (Fed. Cir. 2007) (rejecting proposed claim interpretation that would exclude disclosed examples in the specification). The cases cited by Patent Owner supporting that a claim term may be construed to exclude embodiments where the prosecution history supports such construction are factually distinguishable from the instant case as they regard instances of specific prosecution history disclaimer, clear prosecution disavowal, or relate to a specific definition of the terms in the Specification for the term being construed. Here, “low molecular weight” is not defined in the Specification, but, as Petitioner argues (see Pet. 21–25) is characterized as “demonstrat[ing] faster pharmacokinetics and a higher specific signal within clinically convenient times after administration” and that it “can be synthesized in radiolabeled form more easily.” Ex.1001, 13:33–50, 14:56– 16:14, 17:9–20. We are persuaded by the testimony of Dr. Zeglis, Petitioner’s declarant, that compounds weighing over 1500 Da may share those same behaviors, along with certain identified B moieties disclosed as embodiments. See Ex. 1003 ¶ 83.” slip op. at 10
Claim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 12,115,233 - Aroma360, LLC v. Air Esscentials, Inc.InstitutedPTAB · Oct 8, 2025 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Institution
The Board instituted IPR on claims 7–9 and 11 on all asserted grounds after finding a reasonable likelihood of prevailing on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. We thus institute inter partes review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(1) a bachelor’s degree in mechanical engineering, aerospace engineering, chemical engineering, or a similar engineering field, with at least two years of work experience in fluid dynamics or fluid systems engineering; or (2) a master’s degree in mechanical engineering, aerospace engineering, chemical engineering, or a similar engineering field, with at least one year of work experience in fluid dynamics or fluid systems engineering.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“Although a final conclusion of obviousness must be supported by findings and analysis establishing a reason to combine or modify the known elements as proposed, the analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). Patent Owner also argues that Petitioner “fails to explain how Zeng’s noise reduction head 20 and inner cover 30, designed for a different atomizer configuration, could be integrated into Sevy’s system without changing the principles of Sevy’s operation.” Prelim. Resp. 13–14; see also id. at 16 (arguing that “Zeng’s components are not mere drop-in replacements”). Although the relied-upon structures from Zeng are, of course, disclosed in that reference as part of another atomizer, “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference.” In re Keller, 642 F.2d 413, 425 (CCPA 1981). “Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” Id. As to the alleged change in the principle of operation, Patent Owner has not adequately explained why Sevy’s principle of operation would change with the proposed combination, which replaces Sevy’s alleged “silencer assembly” with similar teachings of Zeng.” slip op. at 27
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,527,094 - Aroma360, LLC v. Air Esscentials, Inc.InstitutedPTAB · Oct 8, 2025 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Institution
The Board instituted inter partes review of claims 1, 4, and 7–10 on all asserted grounds, finding a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. We thus institute inter partes review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63, 369–70 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant prior art. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” Id. (internal quotation marks and citation omitted).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 12–13; see generally Prelim. Resp. At this stage of the proceeding and based on the current record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Motivation foundInstituted
“On the current record, this argument does not identify a deficiency in Petitioner’s position as to clauses 1C and 1D. Patent Owner implies that the structures recited in clauses 1C and 1D require functionality recited elsewhere in the claim—namely, forming a “fluid dispersion” (Prelim. Resp. 4)—but Patent Owner does not adequately present evidence supporting this implied claim construction. See In re Self, 671 F.2d 1344, 1348 (CCPA 1982) (rejecting arguments “not based on limitations appearing in the claims”). Instead, Patent Owner cites to the entirety of claim 1 in support of these implied functional requirements. See Prelim. Resp. 4. Stated differently, Patent Owner has not adequately explained why any particular component (or collection of components) must perform the function of forming the “fluid dispersion” recited in clause 1G. Moreover, even assuming as correct Patent Owner’s assertion that Sevy “requires downstream separation,” Patent Owner has not explained why such a 8 In its Preliminary Response, Patent Owner appears to use different terms for the same concept: “downstream separation”; “post-formation correction”; and “post-atomization correction.” See, e.g., Prelim. Resp. 3 (“downstream separation”), 4 (“post-formation correction”), 5–6 (“post-atomization correction”). In any response, Patent Owner should clarify the scope of these terms. requirement would fall outside of the scope of claim 1. See Elbit Sys. of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1359 (Fed. Cir. 2018) (“‘[A]ttorney argument is not evidence’ and cannot rebut other admitted evidence.” (quoting Icon Health & Fitness, Inc. v. Strava, Inc., 849 F.3d 1034, 1043 (Fed. Cir. 2017))). On the current record, we determine that Petitioner has made a sufficient showing that Sevy discloses or suggests the structures recited in clauses 1C and 1D.” slip op. at 14
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 10,583,449 - Aroma360, LLC v. Air Esscentials, Inc.InstitutedPTAB · Oct 8, 2025 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Institution
Instituted inter partes review of claims 1 and 3–8 on all asserted grounds after finding a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented shows a reasonable likelihood that Petitioner would prevail with respect to at least 1 As Paper 7 in this proceeding, Patent Owner mistakenly filed the Preliminary Response in a related proceeding. one of the challenged claims. We thus institute inter partes review on all challenged claims on all asserted grounds. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 362–63, 369–70 (2018); 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not dispute Petitioner’s proposed definition of the level of ordinary skill in the art, which appears generally consistent with the record at this stage of the proceeding, including the prior art. See GPAC Inc., 57 F.3d at 1579. We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Patent Owner does not argue at this stage of the proceedings that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would understand either the challenged patent or the prior art. For purposes of this Decision, we adopt the definition of the level of ordinary skill in the art proposed by Petitioner, as revised above.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither Petitioner nor Patent Owner propose constructions for any claim terms. Pet. 16–17; see generally Prelim. Resp. At this stage of the proceeding and based on the current record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Analogous artNot reached
“At this stage of the proceeding, the record on the analogous art issue is incomplete. Petitioner seems to take the position that Kaiser is in the same “field” (Pet. 47), but Petitioner does not fully address the issue of analogous art. Although Petitioner was not required to anticipate this argument with its initial filing (see Sanofi-Aventis Deutschland GmbH v. Mylan Pharma., Inc., 66 F.4th 1373, 1379 (Fed. Cir. 2023)), Petitioner may wish to address this issue as appropriate in future briefing. We will consider the full record on this issue, if necessary, as part of our analysis in any final written decision. On the current record and in view of our decision to institute based on other grounds, we reach no conclusion as to whether Petitioner has made a sufficient showing that one of ordinary skill in the art would have combined Goubet and Kaiser as proposed.” slip op. at 23
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites PhillipsPatents in suitUS 10,092,918 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - PTAB · Jul 14, 2025 · IPR2025-00152 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR of claims 1–17 on all asserted grounds after finding a reasonable likelihood that claims 1, 6, and 11 are obvious over Sutardja, Donnelly, and Letendre.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Preliminary Response. Paper 6 (“Prelim. Resp.”). Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record,1 we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner contends that an ordinarily skilled artisan would have been motivated to incorporate Donnelly’s GUI into Sutardja’s display to more easily and conveniently communicate Sutardja’s state of charge information to a user in a graphical format. Id. at 35 (citing Ex. 1011 ¶ 242; Ex. 1003 ¶¶ 157–159. Petitioner also argues that an ordinarily skilled artisan would have found it obvious to combine Donnelly’s GUI depicting a bar graph indicating the charged and uncharged capacity of a vehicle battery into Sutardja according to well-known methods that would have yielded predictable results. Pet. 36 (citing Ex. 1003 ¶ 160). Petitioner also contends that an ordinarily skilled artisan would have reasonably expected to successfully combine Donnelly’s GUI as it relates to the state of charge into Sutardja’s vehicle, which already processed information about the state of charge of its battery and included a display showing charging parameters. Id. (citing Ex. 1011 ¶¶ 242, 243, Ex. 1003 ¶ 161).” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“includes “at least” a bar graph as shown in Figure 7. Id. at 4. Patent Owner argues that Petitioner’s “proposed construction should be rejected” because it “would wrongly import embodiments from the specification.” Prelim. Resp. 20–21. Patent Owner also contends that an ordinarily skilled artisan would recognize that the “unitary charge indicator is not limited to a bar graph representation.” Id. at 21. We discern no dispute over the meaning of “unitary vehicle charge indicator” because Petitioner does not argue that the term is “limited” to the embodiment shown in Figure 7, only that the term “at least includes” that embodiment. Patent Owner does not contend otherwise.” slip op. at 8
- Strike new argumentDecided for petitioner
“Patent Owner argues that Petitioner violates Rule 42.6(a)(3) by impermissibly incorporating arguments from Mr. Andrews’s Declaration into the Petition to avoid the word count limit. Prelim. Resp. 46–49. Patent Owner contends that the Andrews declaration is “over 140 pages” with a substantive portion containing “multiples of the allotted 14000 words” to a petition. Id. at 47. Patent Owner contends that “the only way to potentially understand the Petitioner’s proposed unpatentability challenges is to wade through the extraneous pages cited within the Andrews Declaration.” Id. Patent Owner also complains that Andrews supports his testimony relating to Petitioner’s first challenge by citing “many additional references in addition to references actually ‘relied upon’ by Petitioner.” Id. at 47–48. We discern no violation of Rule 42.6(a)(3). To the contrary, that Mr. Andrews’s supports his extensive explanations of his opinions with citations to dozens of pieces of objective evidence, is a feature, not a bug of his testimony. Mr. Andrews, and Petitioner by extension, leave virtually none of the substance of his testimony unsupported by objective evidence, a practice that we applaud.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,990,788 - PTAB · Jun 11, 2025 · IPR2025-00263 · APJ Barry L Grossman · IPR · Institution
Instituted IPR for claims 1–30 on all asserted grounds; the Board found a reasonable likelihood that claims would be unpatentable over Haley and Lai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“III. CONCLUSION We have determined that there is a reasonable likelihood that Petitioner will prevail on at least one challenged claim. Accordingly, we institute an inter partes review on all challenged claims on each asserted ground. PGS Geophysical, 891 F.3d at 1360 (A decision to institute is a “yes-or-no institution choice respecting a petition, embracing all challenges included in the petition.”).” slip op. at 42
- BurdenInstituted
“limitations of clauses 1.3 and 1.4, but concedes that Haley does not disclose that its driver member has “at least one longitudinal edge with a plurality of spaced-apart protrusions,” as required by clause 1.4. Petitioner further asserts, however, that it would have been obvious “to replace Haley’s hydraulic lifter with the claimed ‘lifter,’ disclosed by [Lai]”. Pet. 13. (citing Ex. 1003 ¶ 54). Dr. Vallee’s cited Declaration testimony provides his opinion on this issue, which is consistent with Petitioner’s argument. Petitioner also asserts that “Lai discloses an electrically-powered, mechanical lifting mechanism with a structure that is essentially identical to the ‘lifter member’ disclosed in the ’776 patent. Pet. 13. Petitioner provides side-by-side colored figures from the ’776 patent and from Lai, reproduced below, to illustrate its argument. Pet. 14. According to Petitioner, the side-by-side comparison of Petitioner’s colored versions of Fig. 12, from the ’776 patent, with Petitioner’s colored versions of Figs. 4 A–D, reproduced above, illustrate why and how the proposed modification would have been obvious. As described by Petitioner, the “lifter member” of the ’776 patent includes a rotatable cam lifter 100 (yellow), with pins 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). Pet. 13 (citing Ex. 1001, 9:30–46, 16:34–48, Fig. 12). Petitioner also cites the “two-pin variants: lifter members 465 and 480” shown in Figs. 31, 33 of the ’776 patent. Id. Petitioner also asserts that, as shown in the side-by-side comparison” slip op. at 33
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededOther
“Petitioner asserts the term “lifter member” in the claims of the ’776 patent is “a means-plus-function term” because the claims “lack any ‘recital of structure, material, or acts in support thereof’ for the ‘lifter’ element.” Pet. 7 (citing 35 U.S.C. § 112(f)). Petitioner also asserts “[t]he Federal Circuit held that the term ‘lifter member’ in the related patents is a means-plus-function term subject to §112(f).” Pet. 7. Petitioner cites no authority for this assertion. We understand this assertion to refer to the decision in Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369 (Fed. Cir. 2022), identified by Petitioner as a related matter. Pet. 2. In this case, which involved patents from the same family as the ’776 patent (see Section I.C of this Decision), the Federal Circuit concluded that “§ 112 ¶ 6 applies to the ‘lifter member’ limitation, and it must be construed to cover only ‘the structure, materials, or acts described in the specification as corresponding to the claimed function and equivalents thereof.’” Id. at 22 F.4th 1379–1381. “Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.” Samsung Elecs. Co. v. Elm 3DS Innovations, LLC, 925 F.3d 1373, 1378 (Fed. Cir. 2019) (citing SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (internal quotation marks omitted). Patent Owner asserts that Petitioner: fails to comply with the requirement of 37 C.F.R. § 42.104(b)(3) to specifically identify the structure in the specification associated with that element. As ‘lifter’ is present in every challenged claim under all four grounds, Petitioner’s failure to provide a claim construction for ‘lifter’ is fatal to its Petition. Prelim. Resp. 13. We disagree. First, the claims in the ’776 patent do not use the single word “lifter” alone. The term used in some of the claims, see, e.g., independent claims 1 and 17, and the claims dependent from claims 1 or 17, is “lifter member.” We recognize that the written description in the ’776 patent states “the rotary-to-lifter 100 is also sometimes referred to herein as a ‘lifter member,’ or simply as a ‘lifter.’” Ex. 1001, 9:5–7. This suggests that that term “lifter” is intended to mean the “lifter member,” which makes the use of either term a distinction without a substantive difference. Moreover, neither independent claims 9 or 24, nor the claims dependent from claims 9 and 24, use the word “lifter” or “lifter member. Second, as stated in Petitioner’s Preliminary Reply, the Petition “identifies the portions of the specification that describe the corresponding structure for the ‘lifter’ when comparing its structure to that of the Lai prior art.” Prelim. Reply 1. The Petition provides a colored version of Figure 12 from the ’776 patent (reproduced below) and identifies the following corresponding structures from the Specification of the ’776 Patent: The “lifter member” of the ’776 patent includes a rotatable cam lifter 100 (yellow [ ]), with pin 104, 106, and 108 (green) on its face surface that engage protrusions 92 (blue) on the driver member 90 (orange). ’776 patent, 9:30–46, 16:34–48, Fig. 12. The ’776 patent also discloses two-pin variants: lifter members 465 and 480 in Figs. 31, 33. [citing] ’776 patent, 32:15–30, 32:48–63. Petition at 13. Based on the record before us, we determine that this identification of corresponding structure is sufficient to satisfy 37 C.F.R. § 42.104(b)(3). We also note that at this stage of the proceeding, Patent Owner does not dispute that Petitioner has identified the correct corresponding structure. To the extent the parties wish to further address the construction of this claim limitation, they may do so during trial, as permitted by our rules.” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“to mean “a chamber that is distinct from the displacement volume of the hollow cylinder and contains part of the working air volume during operation.” Pet. 8. According to Petitioner “there is nothing in the intrinsic record or any of the claims of the ’776 patent that prevents the ‘main storage chamber’ from being in the hollow cylinder, so long as it is distinct from its separately-recited ‘displacement volume.’” Id. at 9 (emphases added). Patent Owner asserts that “[g]rounds 2 and 4 each requires this Board to interpret the ‘storage chamber’ to be the same structure as the hollow cylinder.” Prelim. Resp. 31. According to Patent Owner, “[t]he Federal Circuit, considering both parties’ claim construction arguments, rejected that construction.” Id. Patent Owner does not provide any citation to support its reference to the Federal Circuit decision. It appears to be a reference to the Kyocera decision considering review of the ITC determination. See Kyocera, 22 F.4th at 1383. That decision, however, construed claims in a related patent to “require two distinct structures: the main storage volume and a smaller “hollow cylinder” contained within the main storage volume. Based on the record before us, Petitioner’s proposed construction is consistent with the Federal Circuit’s construction, which states two structures can be distinct even if one distinct structure is “contained within” the other distinct structure. Although the parties dispute the construction of the “storage chamber” claim limitation, this dispute relates only to Grounds 2 and 4. See Prelim. Resp. 31. We need not resolve it to determine whether to institute review. The parties are welcome to develop their arguments regarding this claim limitation during trial. 3. Conclusion Regarding Claim Construction Our claim construction analyses in this decision to institute a trial do not preclude the parties from arguing their proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that claim construction, in general, is an issue to be addressed at trial. Claim construction will be determined at the close of all the evidence and after any hearing. The parties are expected to assert all their claim construction arguments and evidence in the Petition, Patent Owner’s Response, Petitioner’s Reply, or otherwise during trial, as permitted by our rules.” slip op. at 19
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,241,776
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.