- PTAB · Dec 12, 2025 · IPR2025-01116 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over Sudre, Lee, and Penven.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023). In other words, a decision to institute under § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). In addition, if the Board institutes trial, it will “institute . . . on all grounds in the petition.” PTAB Consolidated Trial Practice Guide, 5–6 (Nov. 2019)1 (“CTPG”); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least (1) a Bachelor’s Degree (or higher) in material science, materials engineering, mechanical engineering, textile engineering, or a related field, and (2) a minimum of two years of working experience in textiles engineering, fibers and textiles manufacturing, or a related field.” Pet. 4 (citing Ex. 1003 ¶¶ 21–22). Petitioner also argues that “[a]dditional education could substitute for professional experience, and vice versa.” Id. On the present record, Patent Owner does not contest Petitioner’s proposed level of ordinary skill. Prelim. Resp. 25–26. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’566 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Both parties argue that no claim terms require express construction at this stage of the proceeding. Pet. 3; Prelim. Resp. 26. On the present record, we agree. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent the parties’ arguments regarding unpatentability do address claim construction issues, we address these issues below.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“articulated a reason why a person of ordinary skill in the art would have combined the teachings of Sudre, Lee, and Penven. Prelim. Resp. 60–63. In particular, Patent Owner argues that a person of ordinary skill in the art “would not have been motivated to look into Penven to modify the teachings of Lee because Lee and Penven disclose substantially different structures.” Id. at 60–61. This argument does not address Petitioner’s proposed reason to combine, which looks to Lee and Penven each to modify Sudre, not to Penven to modify Lee. See Pet. 79–81. In addition, “[c]ombining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). In other words, “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425–26 (CCPA 1981). Petitioner provides “some articulated reasoning with some rational underpinning” to combine the teachings of Sudre with those of Lee and Penven. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). In particular, Petitioner directs us to Sudre’s teaching of “a method for manufacturing PMC,” to Sudre’s lack of teaching of “specific parameters, such as warp thread size and spacing” to satisfy the “particular requirements” of its fabric. Pet. 79 (citing Ex. 1003 ¶¶ 248–250; Ex. 1004, 1:2–5, 6:14–17). As Petitioner points out, id. at 79–80, Lee and Penven provided yarn diameters and loop diameters that were conventional, and there is evidence of record that a person of ordinary skill in the art would have used these conventional diameters in constructing Sudre’s paper machine clothing. Ex. 1003 ¶¶ 258–261, 263–266; Ex. 1006, 3:64–66.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,261,566 - PTAB · Nov 10, 2025 · IPR2025-00878 · APJ Carl M Defranco · IPR · Institution
The Board instituted review of claims 1–3 and 11 after finding a reasonable likelihood that claim 1 is anticipated by Cleveland or obvious over Nakagawa.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“contentions, the cited portions of Cleveland, and the testimony of Clearwater’s expert), we find, preliminarily, that Cleveland discloses each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as anticipated by Cleveland.” slip op. at 6
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“5 Clearwater argues that Cleveland qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Pet. 17. In support, Clearwater asserts that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (id. at 18) and submits claim charts to demonstrate that the Cleveland provisional provides written support for: (1) at least claim 1 of Cleveland (id. at 18–21); and (2) the subject matter relied upon in Cleveland (id. at 21–40 (citing Ex. 1006 throughout)). Based on our review of the Cleveland provisional, as well as Clearwater’s claim charts, we are persuaded that the current record demonstrates that Cleveland is prior art to the challenged patent. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1381 (Fed. Cir. 2015).” slip op. at 4
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“satisfies each claim element as identified above in Section I.D, i.e., elements [1.pre]–[1.6]. See id. at 22–40. Clearwater also submits annotated Figure 3 of Cleveland, reproduced below, to further illustrate the specific laminate structure of Cleveland’s coffee cup. See id. at 39.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted
“protective layers have “a coat weight of from 5 to 30 lbs/3000 ft2,” Clearwater submits the declaration of its expert, who explains that, because Nakagawa identifies the specific polymers and the thickness of the coat used for the plastic layers and one skilled in the art “would recognize that the disclosed polymers have a given density,” then “[w]ith these known parameters, the coat weight is easily calculated to be 23.04 lbs./ 3000 ft2 — falling squarely within the claimed range.” Pet. 53–54 (citing Ex. 1003 ¶¶ 132–133; Ex. 1008 ¶ 24; Ex. 1024, at 4). At this stage, we find that testimony credible and supported by the evidence presently of record. After reviewing the preliminary record (including Clearwater’s contentions, the cited portions of Nakagawa, and the testimony of Clearwater’s expert), we find, preliminarily, that Nakagawa discloses or otherwise suggests each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as obvious over Nakagawa. We need not decide Clearwater’s challenge of the dependent claims based on Nakagawa alone nor its challenge of claims 1–3 based on Nakagawa and Tanner. Our analysis of these challenges, in our view, is best left for trial after full development of the record.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,637,126 - PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution
Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,745,847 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027 - Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentablePTAB · Aug 13, 2025 · IPR2024-00101 · APJ Steven M Amundson · IPR · Final written decision
Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not shown unpatentable under the asserted grounds.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we” slip op. at 32
- PTAB / AIA Trials › §315(b) time barDecided for patent owner
“III. WHETHER THE PETITION IS TIME BARRED The parties dispute whether the Petition is time barred based on a” slip op. at 18
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“vacated the panel’s decision denying institution. Paper 12, 6. Among other things, the Director determined based on a “review of the current record” that (1) Menard is not a real party in interest in this proceeding and (2) Menard is not a privy of Petitioner. Id. at 5. Further, the Director remanded the case to the panel and instructed the panel “to determine whether the Petition presents a reasonable likelihood of prevailing with respect to at least one of the challenged claims under 35 U.S.C. § 314(a), and to determine whether to institute inter partes review accordingly.” Id. at 5–6.” slip op. at 3
- BurdenMixed
“U.S. Patent No. 10,299,336 B2 (“the ’336 patent”) (Exhibit 1001). For the reasons explained below, a preponderance of the evidence shows that claims 1–7, 9–15, and 18–20 in the ’336 patent are unpatentable and does not show that claims 8, 16, and 17 are unpatentable. See 35 U.S.C. § 316(e) (2024).” slip op. at 2
Patent outcomesUS 10,299,336 mixed§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,299,336 - Posco Co., Ltd. v. ArcelormittalInstitutedPTAB · Jul 23, 2025 · IPR2025-00371 · APJ Brian D Range · IPR · Institution
The Board instituted IPR on claims 1–25 based on all petitioned grounds, finding a reasonable likelihood that POSCO would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioner meets the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–25 of the ’227 patent based upon Petitioner’s asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’227 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not propose any claim constructions. Pet. 3. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“35 U.S.C. § 103(a) as obvious over Takagi and Cornette, citing the Declaration of Dr. Miles for support. Pet. 1, 6–49 (citing Ex. 1003) (Petitioner’s Ground 1A). a. Claim 1 Petitioner argues that Takagi and Cornette teach or suggest each recitation of claim 1. Pet. 6–31. Petitioner argues, for example, that the preamble of claim 1 is not limiting or, alternatively, imparts no structural distinction from Takagi. Id. at 20–23 (citing, e.g., Ex. 1003 ¶ 48). Petitioner further argues that Takagi and Cornette teach forming or hot stamping to arrive at their products. Id. at 23 (citing, e.g., Ex. 1016 ¶ 36 (Takagi referring to “form[ing]” its products shape); Ex. 1014, 9–11 (Cornette referring to “hot stamping”); Ex. 1003 ¶ 48. Petitioner argues that Takagi teaches a strip of base steel having a first and second side. Id. at 23–24 (citing, e.g., Ex. 1003 ¶ 49; Ex. 1016 ¶¶ 13, 36. Petitioner argues that Takagi teaches a coating that is a “diffusion layer” having five phases as depicted by Takagi Figure 2A and explained by Takagi Table 1 (Takagi Fig. 4). Id. at 24–30 (citing, e.g., Ex. 1003 ¶¶ 50–59; Ex. 1016 ¶ 20, Fig. 2A). Petitioner argues that Takagi alone or as modified by Cornette teaches a coating thickness greater than than 30 µm. Id. at 30–31; Ex. 1014, 9; Ex. 1016 ¶ 35; Ex. 1003 ¶¶ 60–61. Petitioner explains why a person having ordinary skill in the art would have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 31–47; Ex. 1016 ¶¶ 19–37, 47; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13; Ex. 1055 ¶¶ 2, 7, 14–15, 18, Fig. 3). Based on our review and consideration of the current record, we determine that the information presented sufficiently supports, for purposes of institution, Petitioner’s assertions that Takagi and Cornette teach or suggest each limitation of claim 1. See Pet. 6–31. We therefore determine Petitioner has met its burden to show a reasonable likelihood it would prevail in demonstrating that claim 1 would have been obvious over Takagi and Cornette.” slip op. at 12
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,686,562 - PTAB · Jul 9, 2025 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1–16 and all asserted grounds, finding a reasonable likelihood that claim 1 is obvious over Bonn and Mizuta.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. On the present record, Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. Prelim. Resp. 1–52. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’003 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We apply the same claim-construction standard used in the federal courts—in other words, the claim-construction standard that would be used to construe the claim in a civil action under 35 U.S.C. § 282(b), which is articulated in Phillips. See 37 C.F.R. § 42.100(b). Under the Phillips standard, the “words of a claim ‘are generally given their ordinary and customary meaning,’” which “is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1312–13. Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–52. On the present record, we agree. As discussed below, we are able to determine whether to institute inter partes review of the ’003 patent without expressly construing any terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner argues that Petitioner does not show sufficiently that a person of ordinary skill in the art would have had a reason to modify Bonn to remove local oscillator 55. Prelim. Resp. 13–15. We disagree. Petitioner argues that, “[i]n addition to using Figure 7’s ‘dual gate FET structure in high frequency signal mixing’ applications . . . , Bonn discloses using this dual gate FET in ‘other applications such as high frequency signal amplification.’” Pet. 22 (quoting Ex. 1006, 11:26–37). Indeed, Bonn does suggest using its structure for signal amplification. Ex. 1006, 11:26–37 (“the dual gate FET structure of the present invention can be tailored to provide superior performance . . . in . . . other applications such as high frequency signal amplification”). On the present record, this appears to have provided the motivation for a person of ordinary skill in the art to use Bonn for amplification instead of for signal mixing. Petitioner relies on the testimony of Dr. Bernstein to show the modifications that a person of ordinary skill in the art would have considered necessary in order to convert Bonn’s structure for signal-amplification use. Pet. 23–25 (citing Ex. 1003 ¶¶ 98–109). In particular, Petitioner cites Dr. Bernstein’s testimony that a person of ordinary skill in the art “would have found it obvious to remove Figure 1’s LO (local oscillator) port 55 and its associated impedance matching components because the LO signal is no longer being mixed.” Ex. 1003 ¶ 98; see Pet. 23. Dr. Bernstein supports this testimony with citations to Bonn and with reasoning regarding why a person of ordinary skill in the art would have made this modification. Ex. 1003 ¶ 98 (citing Ex. 1006, 1:20–23, 3:19–21, 3:30–41). Accordingly, on the present record, we are persuaded that Petitioner has shown sufficiently that a person of ordinary skill in the art would have had reason to modify Bonn’s structure to remove the connection between a local oscillator and the gate of the second transistor. Finally, Patent Owner argues that Petitioner’s proposed modification would have rendered Bonn inoperable for its intended purpose because the modification would eliminate the ability of Bonn’s structure to conduct high frequency signal mixing. Prelim. Resp. 26–27. As Patent Owner notes, one purpose of Bonn is to mix high-frequency signals. Ex. 1006, 11:33–36. But Bonn itself teaches using its structure for “other applications,” including “high frequency signal amplification.” Id. at 11:33–37. Thus, on the present record, we are persuaded that Petitioner’s proposed modification does not render Bonn inoperable for its intended purpose so much as it acknowledges the modifications necessary to convert Bonn from one of its intended purposes to another. Thus, Petitioner has shown sufficiently for the purpose of the present Decision that a person of ordinary skill in the art would have had reason to combine Bonn and Mizuta and that the combination of Bonn and Mizuta teaches or suggests the disputed limitation of claim 1. We encourage the parties to develop the arguments and the record surrounding this issue further during the trial.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,264,003
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.