- Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentablePTAB · Jun 10, 2026 · IPR2025-00350 · APJ Jason M Repko · IPR · Final written decision
Claims 7–12 were held unpatentable over Wannamaker alone or with Avellan; claims 1–6 and 13 were not shown unpatentable because Avellan did not teach the claimed screen-capture sequence and assembly.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art. PO Resp. 17. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 19–20; PO Resp. 18. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding.” slip op. at 5
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Yet paragraph 122 of Mr. Lipoff’s declaration merely repeats the Petition’s argument almost verbatim. Compare Ex. 1007 ¶ 122, with Pet. 28. Mr. Lipoff does not add any citation to Avellan or any other source that supports his testimony. See Ex. 1007 ¶ 122. Nor does Mr. Lipoff offer any additional technical reasoning than what is stated in the Petition. Testimony may be entitled to little weight if it merely restates the petition’s unsupported, conclusory assertions without adding supporting evidence or technical reasoning. Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). That is the case here.” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We are persuaded by Patent Owner’s argument that claim 1 is not obvious over Avellan because it does not assemble a media stream of multimedia items using the recited screen captures. See PO Resp. 21–23. We agree with Patent Owner that the plain language of the claim requires more than transmitting individual media items. PO Sur-reply 20. To the extent that Avellan captures images, those images do not meet the claimed requirements for a “temporal sequence of screen captures” in the independent claims, which must (1) be of the web page rendered by a browser, (2) “define all the content of the web page at a given time,” (3) “illustrate a dynamic change of at least a portion of the content over time” when two of them are compared, and (4) used to assemble “the at least one media stream.” Rather, the record better supports Patent Owner’s argument that Avellan transmits the multimedia items separate from any media stream assembled from screen captures. PO Resp. 21–23; PO Sur-reply 20.” slip op. at 7
Patent outcomesUS 10,524,002 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 10,524,002 - Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentablePTAB · May 28, 2026 · IPR2025-00351 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–9 are unpatentable as obvious over the stated combinations; claims 10–26 were not shown unpatentable because Avellan does not teach limitations [10d]–[10f].
RulingsFinal written decision- Skill levelOther
“would have a bachelor’s or equivalent degree in computer science or a related field and at least 2 years of experience in multimedia processing or delivery using internet protocols.” Pet. 10 (citing Ex. 1002 ¶¶ 67–68). The Petition further states that “a person with less formal education but more experience, or more formal education but less experience, could have also met the relevant standard for a POSITA.” Id. Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art of delivering multimedia content. Resp. 18. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions. slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 11; Resp. 18–19; Reply 5. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Expert testimonyPetitioner expert creditedDecided for petitioner
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentableNot shown unpatentable
“To establish inherency, the extrinsic evidence “must make clear that the missing descriptive matter is necessarily present in the thing described in the reference, and that it would be so recognized by persons of ordinary skill.” Continental Can Co. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991). “‘Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.’” Id. at 1269 (quoting In re Oelrich, 666 F.2d 578, 581 (C.C.P.A. 1981)). Reasonable inferences of a POSITA may suffice to establish inherent disclosure in a prior art reference such as Farber. See Eli Lilly v. Los Angeles Biomedical Research Institute, 849 F.3d 1073, 1074–1075 (Fed. Cir. 2017) (“[T]he dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference.”). Here, however, we find the Petition’s argument and evidence insufficient to establish by a preponderance of the evidence that Farber inherently discloses limitation [1b].” slip op. at 16
Patent outcomesUS 11,140,441 mixedClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,140,441 - Kohler Co. v. Delta Faucet Co.Some claims unpatentablePTAB · Oct 1, 2025 · IPR2024-00700 · APJ Jane E Inglese · IPR · Final written decision
Claims 1, 2, and 9 are unpatentable as obvious; claims 3–8 and 10–24 were not shown unpatentable because the asserted references failed to establish limitations including the claimed light pipe features.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt Petitioner’s definition of a POSITA. Petitioner’s witness (Mr. Cook) qualifies as a POSITA under this definition, and, therefore, is qualified to opine from the perspective of a POSITA on technical matters included within the areas of expertise prescribed by the definition. As indicated above, Petitioner’s definition of a POSITA does not require education in the field of optics and professional experience designing or analyzing optical apparatus, unlike Patent Owner’s definition. We are aware, however, that Patent Owner’s witness (Dr. Klopp) has more extensive experience with optical systems and methods than Petitioner’s witness (Mr. Cook). Compare Ex 1003 ¶¶ 8–14, Ex. 2005, 39:21–59:17, with Ex. 2003 ¶¶ 3–20, Ex. 2004, 1–2, Ex. 1015, 10:22–13:25. Although Mr. Cook possesses excellent credentials in the field of mechanical engineering, his experience in the design and analysis of optical systems and methods is sparse and insubstantial compared to that of Dr. Klopp. Id. Due to this difference in experience levels, in instances where the witnesses express differing views on factual issues related to optical systems and methods, we will accord more weight to Dr. Klopp’s testimony than to Mr. Cook’s.” slip op. at 8
- Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed
“through the light transmission portion and bottom output face 313 of light conductor 38, which teaches transmitting light in parallel with the longitudinal axis of the housing. Tseng does not disclose or teach that light is emitted through the side surface of annular protrusion 383 in a direction perpendicular to the longitudinal axis of the housing. Ex. 1004 ¶ 97. Petitioner’s assertions that this would be the case consist solely of conclusory statements, supported only by citations to Mr. Cook’s declaration. Mr. Cook, however, simply repeats Petitioner’s conclusory statements, without providing sound technical reasoning supported by objective evidence to explain and support his opinions. Ex. 2003 ¶¶ 101– 102, 105, 195–198, 202. We, therefore, accord little weight to Mr. Cook’s opinion on this particular matter because it “merely repeats, verbatim, the conclusory assertion for which it is offered to support,” and “does not cite to any additional supporting evidence or provide any technical reasoning [in] support.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). Furthermore, Mr. Cook’s opinion conflicts with that of Patent Owner’s witness, Dr. Klopp, who opines that a “POSITA would understand from Tseng’s third embodiment that light from the LED would bypass the annular protrusion 383 of outer cliff 381, while transmitting downwardly toward the output face 313.” Compare Ex. 1003 ¶¶ 174–175, 190–194, with Ex. 2003 ¶¶ 101–102, 105. As discussed above, Mr. Cook is qualified to opine from the perspective of a POSITA on technical matters included within the expertise of a person meeting Petitioner’s definition of a POSITA, which do not include optics and optical apparatus. We, therefore, credit Dr. Klopp’s opinion over that of Mr. Cook on this particular factual issue of how it is directly related to optical systems and methods about which Mr. Cook possesses limited relevant experience. See Ex. 1003 ¶¶ 6–15 (experience in communication systems and electronics); Ex. 2005, 55:16–58:19 (design experience with electronics that use indicator lights or fiber-optic communications; no professional experience with light pipes, diffusers, or plumbing fixtures). Dr. Klopp possesses substantial research and professional experience with optical methods, fiber optic light pipes, light guides, diffusers, prisms, and analysis of faucets, spray heads, and plumbing fixtures. See Ex. 2003 ¶¶ 6–10 Supra 8 (discussing weight accorded to conflicting witness testimony); see also Resp. 2–3 (arguing that “Petitioner’s expert, Mr. Cook, is a mechanical engineer with substantial professional experience in electronics for high-voltage power systems and communications, but he has limited experience with the claimed subject matter.”).” slip op. at 34
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“would be used to construe the claim[s] in a civil action [held] under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention when read in the context of the specification and prosecution history. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe terms in controversy only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner asserts that the claim terms do not require construction and should be afforded their plain and ordinary meaning. Pet. 13. Patent Owner contends that it applies the plain and ordinary meaning of the claim terms. Resp. 7. Taking into consideration the information presented, we determine that none of the claim terms requires express construction for purposes of resolving the dispute before us.” slip op. at 9
- BurdenMixed
“perpendicular to the longitudinal axis of Tseng’s housing (internal 33 and external 34 sleeves). “In an inter partes review, the burden of persuasion is on the petitioner to prove ‘unpatentability by a preponderance of the evidence,’ 35 U.S.C. § 316(e), and that burden never shifts to the patentee.” In re Magnum Oil Tools Int’l Ltd., 829 F.3d 1364, 1375 (Fed. Cir. 2016) (quoting Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015)); see also Aqua Products, Inc. v. Matal, 872 F.3d 1290, 1306 (Fed. Cir. 2017 (en banc (quoting Magnum Oil)).” slip op. at 40
Patent outcomesUS 10,393,363 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,393,363 - Ceva Santé Animale S.A. / Egg-Chick Automated Technologies S.A.S et al. v. Targan, Inc.Some claims unpatentablePTAB · Jul 24, 2025 · IPR2024-00595 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–15 are unpatentable as obvious over the asserted §103 grounds; Petitioner did not show claims 16–18 unpatentable because the angled-conveyor combination lacked a supported rationale.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us, including the ’124 patent, the Gershman, Pierre, Yavnai, Tao, and Goodwin references, and the background and qualifications of both sides expert witnesses that reflect the knowledge and experience of a POSITA, including knowledge of systems for assessing and transporting poultry in an industrial setting. Patent Owner’s proposed skill level overlaps with Petitioner’s proposed skill level, and any differences would not alter the outcome of this proceeding. Therefore, we adopt Patent Owner’s proposed skill level with two modifications. A POSITA also could have a Bachelor of Science degree in Animal Science or similar discipline, and a POSITA would be familiar with techniques for assessing and transporting poultry in an industrial setting, such as visual and/or anatomical characteristics of a chick.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“Therefore, we find that Applicant distinguished Tao from “an unrestrained chick” because in Tao’s automated system a chick is restrained—the chick is held in place—by a retainer unit on a moving platform, whereas in Applicant’s claimed system a chick is not held in place on a moving platform. We further conclude that Applicant’s reason for distinguishing the claimed invention over Tao informs the claim construction even if the “prosecution history statements do not rise to the level of unmistakable disavowal . . . .” Personalized Media, 952 F.3d at 1345 (Fed. Cir. 2020). In view of the ’124 patent claims, specification, and prosecution history, we determine “an unrestrained chick” is a chick not held in place on the moving platform and free to open its wings.” slip op. at 19
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“For the reasons given below, we find the Petition has established that Gershman discloses and teaches “a moving platform to support an unrestrained chick of a particular breed” by a preponderance of the evidence.” slip op. at 29
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“to determine a characteristic [of the chick] . . . [that] manifests in one of two or more possible states, e.g., sex (male vs. female), health (healthy vs. unhealthy), genetic mutation (present vs. not present).” Reply 13 (citing Ex. 1004, 3). The recitation of a generic “database of images” does not distinguish limitation [1.4] from the asserted combination of Gershman-Pierre, particularly in view of Pierre’s disclosure of “a computerized processing process is implemented in order to compare the captured images to reference images,” as asserted in the Petition. Ex. 1004, 3 (emphasis added); see Pet. 23–24 (citing Ex. 1003, 2–5; Ex. 1004, 3, 5). Thus, we find that storage of Pierre’s reference images of male and female wing feathers in a database used for comparison in Gershman’s computerized digital chick image processing system would have been obvious to a POSITA and satisfies limitation [1.4].19 We agree with Petitioner that it would have been obvious and well within the skill level of a POSITA—someone with a Bachelor of Science degree in agricultural, industrial, or electrical engineering and two years of experience in industrial poultry sexing and/or image processing (Resp. 20)—to store reference images as taught by Pierre in a “computerized processing” database. The rationale argued by Petitioner, to organize the collection of reference images for comparison to determine whether the characteristic of interest was present, finds direct support in Gershman and Pierre. Both references disclose comparing digital images of a chick’s wing feathers to reference data (Gershman) or reference images (Pierre) of male and female chick wing patterns. Pet. 23–24; Reply 12–13. Storing digital reference images in a database for comparison to captured digital images is, moreover, a basic and straightforward task in any computerized image processing” slip op. at 44
Patent outcomesUS 10,806,124 mixedClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,806,124 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentablePTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30
- Obviousness (§103) › KSR rationalesMotivation foundUnpatentable
“We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43
Patent outcomesUS 7,812,409 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,812,409 - Institut Straumann AG / Dental Wings Inc. v. Sirona Dental Systems GmbHSome claims unpatentablePTAB · Nov 15, 2016 · IPR2015-01190 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–8 were held unpatentable as obvious over Bannuscher and Truppe; claims 9–10 were not shown unpatentable; the motion to amend was denied.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“interpretation of the language used in claim 1 and the additional limitations of dependent claims 9 and 10. Patent Owner’s proposed construction also impermissibly reads limitations from the preferred embodiment of Figure 5 into claim 1. Patent Owner would limit the pilot hole location exclusively to a position directly over the implant position and require the drill bit to pass through the pilot hole while drilling a bore hole into the patient’s jaw. The language recited in claim 1, in the context of the ’006 specification, does not so-limit the “determinating a pilot hole” step. First, Patent Owner fails to consider the present participle form “determinating”5 at the beginning of the recited method step at issue. As a result, Patent Owner conflates the recited device production step with a specific process for drilling a bore hole into a patient’s jaw during tooth implant surgery. PO Resp. 14–15. For example, Patent Owner relies on Dr. Erickson’s Declaration testimony (and Dr. Benjamin’s deposition testimony) for the proposition that “pilot hole” is a term of art referring to “an initial hole through which a pilot drill passes during an operation.” Ex. 2002 ¶ 37 (cited at PO Resp. 16–17); see also PO Resp. 16–17 (citing Ex. 2023, 24:3– 22, 25:18–27:2, 52:2–9). The ’006 patent does not describe or reference any such “pilot drill” or “initial hole” being made during a tooth implant operation. Regardless, the claim limitation at issue is a step in a method of producing a drill template. It recites defining a pilot hole in a drill template with reference to the surfaces of neighboring teeth, nothing more. The function of actually passing a drill through a pilot hole in a drill template” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“Petitioner argues that the term “pseudo-x-ray picture” is not a term that has a commonly understood meaning to a POSA. Pet. 19 (citing Ex. 1002 ¶ 45 [47]). Patent Owner does not comment on the construction of “pseudo-x-ray picture.” PO Resp. 15–19. Having reviewed the complete record, we adopt Petitioner’s argument and evidence in support of Petitioner’s proposed broadest reasonable interpretation of “pseudo-x-ray picture.” Therefore, we adopt Petitioner’s proposed broadest reasonable interpretation of “pseudo-x-ray picture” as “any representation of measured data records of the three-dimensional optical measuring that can be superimposed on an x-ray image.” Pet. 19 (citing Ex. 1002 ¶ 49).” slip op. at 17
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableInherency not foundNot shown unpatentable
“stylus is used to penetrate the surface of the gum repeatedly to measure the structure of the jaw bone displayed in Figure 25. PO Resp. 30–31 (citing Ex. 1007, 24:53–65 (“[S]tylus member 52 is provided with a sharp stylus 574 (FIG. 1) having a length sufficient[ly] long to penetrate gum tissue and contact the bone surface. . . . [P]ractitioner repeats the procedure of piercing the gum tissue in a region about the desired implantation site and taking point data until enough data has been collected . . . to map . . . the entire surface of bone 558 [Fig. 25] about the implantation site.”)). We agree with Patent Owner and find that the use of a sharp stylus to pierce the gum and take multiple data points via contact digitization of the jaw bone beneath the skin surface is not a 3-D optical measuring of the visible surfaces of a patient’s jaw.” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“would have been motivated to combine their teachings with respect to correlating X-ray imaging data of the jaw and 3-D surface data of the jaw and teeth. Reply 22–23 (citing Ex. 1002 ¶¶ 89, 92; Ex. 1008, 1:10–11 (“precise planning of the surgical operation is necessary”); Ex. 1010, 5:19– 25 (“it is possible to carry out the entire implantological, treatment and operation planning on a scientific basis . . . to implement holistic planning results in a precisely clinical manner”)). More particularly, Bannuscher discloses the desire to obtain “all the necessary [clinical] parameters” relevant to pre-surgical implant planning, which can be “combined together” (“correlated” in the language of claim 1) using planning simulation software, for transfer to a drill template. Ex. 1010, 5:44–6:13, 6:24–40, 7:38–8:4. As Dr. Erickson testified, it would have been desirable for a POSA to have as much diagnostic information as possible when planning for dental implant surgery. Ex. 1029, 31:12–21. Truppe discloses the advantage of correlating three-dimensional X-ray imaging data of the jaw and optical imaging data of the jaw and teeth, using simulation software, to obtain a “vivid” representation. Ex. 1008, 2:7–16, 3:19–28, 3:56–58; 4:1–5. Truppe, therefore, discloses a similar process to that disclosed in Bannuscher with respect to correlating 3-D X-ray imaging data and 3-D optical data representing the surfaces of the jaw and teeth, to generate the best possible representation of the patient’s jaw and teeth. Ex. 1002 ¶¶ 89–92. A POSA would have been motivated to use Truppe’s optical measurement system to generate 3-D surface data of the jaw and teeth for use in Bannuscher’s planning simulation software, in order to produce an enhanced image for determining the optimal bore hole and pilot hole in the drill template. Id.; Ex. 2023, 186:8–187:13 (“the optical imaging [of Truppe] would basically just enhance the diagnostic data [of Bannuscher]”). For example, a POSA would have optically measured the plaster model of the jaw and teeth referenced in Bannuscher and the patient’s actual jaw and teeth, as in Truppe, to produce a “vivid” image for correlation with the X-ray imaging data. Ex. 1002 ¶¶ 89, 92.20 Bannuscher’s determination of the optimized bore hole and corresponding pilot hole in the drill template would be based on the enhanced imagery generated from the correlated 3-D data sets. In short, we are persuaded that a POSA would have had reason to incorporate the teaching of Truppe’s enhanced 3-D optical measurement technique into Bannuscher’s method for correlating 3–D X-ray image and model geometry data sets, to determine an optimal bore hole and corresponding pilot hole in the drill template. For the reasons given above, we are persuaded that Petitioner has established a sufficient motivation for a POSA to combine the relevant teachings of Bannuscher and Truppe, with a reasonable expectation of success, by a preponderance of the evidence.” slip op. at 40
Patent outcomesUS 6,319,006 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,319,006 - Fca US LLC v. Signal IP, Inc.Some claims unpatentablePTAB · Oct 19, 2016 · IPR2015-01118 · APJ John A Hudalla · IPR · Final written decision
Claim 3 is unpatentable under § 103 over three instituted combinations; claims 1 and 2 were not shown unpatentable over Mock and Steele.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We disagree with Signal. In particular, FCA cites Dr. Lall’s testimony on “experience in vehicle electronics” and “experience in the design of automobile components.” Pet. 17 (citing Ex. 1009 ¶¶ 17–19). In addition, Dr. Lall testified at his deposition that an ordinarily skilled artisan also would have had the general background tools provided by obtaining a bachelor’s degree in mechanical or electrical engineering, as defined by the standard curricula for those degrees. See, e.g., Ex. 2001, 11:16–15:22. Dr. Lall also referenced his familiarity with these curricula based on his employment as a professor in the Department of Mechanical Engineering at Auburn University. See id. at 12:19–13:5; Ex. 1009 ¶ 4. Accordingly, we do not agree with Signal that Dr. Lall’s testimony as to the level of ordinary skill in the art for the ’374 patent is conclusory and/or lacking a factual basis. As such, we decline to discount the weight given to Dr. Lall’s testimony on that issue.6 Importantly, Signal never proposed an alternative definition of the ordinary level of skill in the art. See Tr. 48:17–25. As such, we have no indication from Signal about what particular aspects of FCA’s definition Signal believes are incorrect, if any. FCA’s proposed definition of the level of ordinary skill comports with the qualifications a person would need to understand and implement the teachings of the ’374 patent and the prior art of record. Accordingly, we apply it for purposes of this Decision.” slip op. at 16
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We disagree with Signal. In particular, FCA cites Dr. Lall’s testimony on “experience in vehicle electronics” and “experience in the design of automobile components.” Pet. 17 (citing Ex. 1009 ¶¶ 17–19). In addition, Dr. Lall testified at his deposition that an ordinarily skilled artisan also would have had the general background tools provided by obtaining a bachelor’s degree in mechanical or electrical engineering, as defined by the standard curricula for those degrees. See, e.g., Ex. 2001, 11:16–15:22. Dr. Lall also referenced his familiarity with these curricula based on his employment as a professor in the Department of Mechanical Engineering at Auburn University. See id. at 12:19–13:5; Ex. 1009 ¶ 4. Accordingly, we do not agree with Signal that Dr. Lall’s testimony as to the level of ordinary skill in the art for the ’374 patent is conclusory and/or lacking a factual basis. As such, we decline to discount the weight given to Dr. Lall’s testimony on that issue.6” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We are persuaded by Signal’s arguments. “Distinctive” ordinarily means “characteristic of one person or thing, and so serving to distinguish it from others.” Distinctive, NEW OXFORD AMERICAN DICTIONARY (1st ed. 2001) (Ex. 3001). Accordingly, the plain and ordinary meaning of the limitation “distinctive codes for tire transmitters and vehicle function transmitters” must reflect that the recited codes distinguish tire transmitters from vehicle function transmitters. This is consistent with the surrounding language of claim 1, which recites different actions taken depending on whether the transmitted data contains “a distinctive code for tire transmitters” or “a distinctive code for the vehicle function transmitters.” This usage within the claim is important because “the claims themselves provide substantial guidance as to the meaning of particular claim terms.” Phillips, 415 F.3d at 1314. In particular, “the context in which a term is used in the asserted claim can be highly instructive.” Id. We also note that FCA’s proposed interpretation would read out language from the claim. Under FCA’s theory, the claim does not require the codes to distinguish between tire transmitters and vehicle function transmitters, and encompasses codes that are merely distinct from each other. In effect, FCA would have us read the limitation as “the remote transmitters all having the same data format but distinctive codes.” The claim does not stop there, however. The full limitation is “the remote transmitters all having the same data format but distinctive codes for tire transmitters and vehicle function transmitters” (emphasis added). Thus, the codes are distinctive “for” tire transmitters and vehicle function transmitters, and the processor performs different actions depending on whether the transmitted data contains “a distinctive code for tire transmitters” versus “a distinctive code for vehicle function transmitters.” FCA’s proposed interpretation would read out this important aspect of the claim. Interpreting the claim to require the codes to distinguish between the two types of transmitters also is consistent with the Specification. We agree with Signal that the usage of “distinctive codes” in claim 1 is supported by the Specification’s disclosure of an exemplary message format with a “header” that “identif[ies] the source as a tire sender or a keyless entry fob.” Ex. 1001, 4:51–55, Fig. 4. Importantly, the header is separate and distinct from the “unique transmitter identification code,” an identifier unique to each transmitter that corresponds to the “ID” block in Figure 4. Id. at 4:55– 56, Fig. 4. In other words, the Header distinguishes types of transmitters (i.e., a tire sender or keyless entry fob) by their function or category, whereas the ID uniquely identifies a particular transmitter and distinguishes it from the others. An exemplary use of the ID block is illustrated with respect to step 94 of Figure 7, and it serves to show the different uses of the Header and the ID: After a message is determined to be a tire pressure message via category identification at step 78, a low pressure warning may be displayed “for the particular tire position which sent the message as determined by the identification code incorporated in the transmission,” among other things. Id. at 5:20–23, 5:32–44, Fig. 7.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We are not persuaded by Signal’s arguments because we do not agree with Signal that Schuermann’s separate interrogation implies that a sign-up procedure is unnecessary. Rather, Schuermann is silent as to whether and how a sign-up procedure would be used, so FCA is correct that Schuermann “leaves it to persons of ordinary skill in the art to use known techniques for accomplishing transponder sign-up.” Pet. Reply 4. As such, we are persuaded by FCA’s rationale that an ordinarily skilled artisan would have had reason to incorporate Mock’s sign-up procedure to ensure reliable identification of tire transmitters. See Pet. 29–30; Ex. 1009 ¶ 35. We additionally agree with FCA that an ordinarily skilled artisan would have appreciated the benefits of adding Mock’s sign-up procedure based on the cost reductions Mock mentions that are associated with a changeable identification code at the tire transmitter. Ex. 1005, 4:47–51. Signal’s counsel conceded that Mock teaches this benefit at the oral hearing. Tr. 38:4–25.” slip op. at 24
Patent outcomesUS 5,463,374 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 5,463,374 - Google, Inc. v. Personal Audio LLCSome claims unpatentablePTAB · Sep 9, 2016 · IPR2015-00846 · APJ Mitchell G Weatherly · IPR · Final written decision
Claims 1–4, 9, and 13 are unpatentable as obvious over Chase and Loeb; claims 5–8, 14–17, 28, and 29 were not shown unpatentable.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“construction in light of the specification of the patent in which it appears.” 37 C.F.R. § 42.100(b); see also Cuozzo Speed Techs., LLC v. Lee, 136 S. Ct. 2131, 2142 (2016) (affirming that USPTO has statutory authority to construe claims according to Rule 42.100(b)). When applying that standard, we interpret the claim language as it would be understood by one of ordinary skill in the art in light of the specification, and absent any special definition, we give claim terms their ordinary and customary meaning. See In re Suitco Surface, Inc., 603 F.3d 1255, 1260 (Fed. Cir. 2010); In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007) (“The ordinary and customary meaning is the meaning that the term would have to a person of ordinary skill in the art in question.” (internal quotation marks omitted)). Only terms which are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999). In our Institution Decision, we preliminarily interpreted the “processor for . . .” elements of claims 1 and 4 Dec. 7–8. After our Institution Decision, neither party identified any issues relating to our preliminary interpretation of the “processor for . . .,” and we discern no other reason to modify our interpretation. Accordingly, we maintain our interpretation of the “processor for . . .” for the purposes of this Final Written Decision. Our interpretation is consistent with the findings of the District Court in the Apple Litigation, which interpreted the “processor for . . .” elements as recited in claims 1, 4, 5, 6, and 14 under 35 U.S.C. § 112, ¶ 6. Because the parties raise issues regarding the scope of terms introduced in claims 5, 6, and 14, we also adopt the District Court’s interpretation of those terms and the reasoning supporting those interpretations. The claim interpretations upon which we rely in resolving disputed issues are summarized in the table below.” slip op. at 8
- Prior constructionPrior construction adoptedDecided for petitioner
“In our Institution Decision, we preliminarily interpreted the “processor for . . .” elements of claims 1 and 4 Dec. 7–8. After our Institution Decision, neither party identified any issues relating to our preliminary interpretation of the “processor for . . .,” and we discern no other reason to modify our interpretation. Accordingly, we maintain our interpretation of the “processor for . . .” for the purposes of this Final Written Decision. Our interpretation is consistent with the findings of the District Court in the Apple Litigation, which interpreted the “processor for . . .” elements as recited in claims 1, 4, 5, 6, and 14 under 35 U.S.C. § 112, ¶ 6. Because the parties raise issues regarding the scope of terms introduced in claims 5, 6, and 14, we also adopt the District Court’s interpretation of those terms and the reasoning supporting those interpretations. The claim interpretations upon which we rely in resolving disputed issues are summarized in the table below.” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“As stated by the Federal Circuit, “a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012). “Rather, the test for obviousness is what the combined teachings of the references would have suggested to those having ordinary skill in the art.” Id. Petitioner does not seek to combine the devices of Chase and Loeb physically. Rather, Petitioner argues that Loeb describes an example of a conventional interface used for controlling a device that plays music and contends that features of that interface would have been recognized as advantageous for Chase’s affiliate terminal. We are persuaded that a skilled artisan would have sought out examples of admittedly conventional interfaces to improve the functionality of Chase’s affiliate terminal. See KSR, 550 U.S. at 417 (“[I]f a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.”).” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We are not persuaded that Chase teaches away from discontinuing a currently playing song to advance to a next segment. According to Chase, “[t]he jock box is a physical representation of a DAC cart located in a studio. It provides 8 pushbuttons each with an LED and a small LCD display. Conceptually the jock box is a CD player with an automated changer.” Ex. 1007 ¶ 219. As explained above, and shown in Chase’s Figure 4, DAC 52 is a component separate from remote control terminal 54. The jock box is a “physical representation of a DAC cart.” Id. We read this to be a typographical error and view the jock box as a physical representation of a DAC card, e.g., DAC card 52. If “cart” is not a typographical error, it could refer to a “cart machine,” id. ¶ 36, which also is a component separate from remote control terminal 54 (Figure 4 shows line 56 communicating with a cart, not shown). In either case, Chase’s description of a jock box does not refer to the behavior of remote control terminal 54, which is described elsewhere as follows: The DJ may also request, through the remote control terminal, that the DAC 52 start play of the next segment queued in the DAC 52, stop play of the current segment, fast forward/rewind through the current segment or to a next/previous segment. The DJ may use up/down arrows on the remote control terminal to scroll through a play list displayed to the DJ and select, out of turn, a segment from the play list. Id. ¶ 186. This description is consistent with a device that can discontinue play of a current segment and skip to the next. Thus, Chase does not teach away from a player with that behavior.” slip op. at 24
Patent outcomesUS 7,509,178 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,509,178 - Daifuku Co., Ltd. / Daifuku America Corp. v. Murata Machinery, Ltd.Some claims unpatentablePTAB · May 3, 2016 · IPR2015-00083 · APJ Ken B Barrett · IPR · Final written decision
Claims 1, 3, 4, 9, 11–15, 17, and 20 are unpatentable as anticipated by JPAP ’213; claims 1–20 were not shown unpatentable as obvious over JPAP ’213 and JPAP ’237.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“In our Institution Decision, we construed the “translating stage is configured to vertically move the gripper portion” limitation as follows: Claim 1 merely requires a translating stage configured to vertically move the gripper to a position near (“proximate”) one of two locations, a load port and a storage location. The translating stage need not be configured to move the gripper to a location proximate both because the claim uses the phrase “at least one of” those two locations. Dec. on Inst. 12. After further development of the record and consideration of the arguments presented and evidence relied upon by both parties, we determine that the above construction is appropriate with respect to this Final Written Decision. Accordingly, we construe “at least one of [a] and [b]” to mean “at least one of the listed items but not necessarily both.”” slip op. at 15
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“construction for the “at least one of” phrase, “there is no anticipation because JPAP ’213 cannot move the gripper proximate to the claimed positions.” PO Resp. 22. This argument is not persuasive because, for the reasons set forth above, the properly construed claims are not as narrow as Patent Owner proposes. See Section II.A. Even were we to conclude that Patent Owner’s proposed construction, where “at least one of” modifies both “[a]” and “[b],” Patent Owner’s arguments are not on point. Claim 1, for example, recites “the translating stage is configured to vertically move the gripper portion . . . to at least one of a second position proximate to a load port [beneath the rail] and a third position proximate to a storage location [disposed lateral to the rail].” There is no dispute that the system of JPAP ’213 is capable of moving to a location proximate a location under the rail. As to the storage location, it is not readily apparent how the above-quoted claim language requires, as Patent Owner argues, a vehicle “capable of moving the gripper/hoist mechanism laterally.” PO Resp. 23; see also Ex. 2016 ¶ 102 (Dr. Bottom’s offering the conclusory opinion that “[A] vehicle capable of moving the gripper to a position proximate to the storage location/conveyer lateral to the overhead rail must be capable of moving the gripper/hoist mechanism laterally.”). A vertically-moving system would be configured to move a gripper proximate (near, next to) an adjacent storage location even if lacking the ability to move laterally so as to place a unit on a storage shelf. Cf. Dec. on Inst. 12 (indicating our understanding of “proximate” as meaning “near”); see, e.g., Ex. 1003, col. 8, ll. 12–16 (“[The overhead hoist transport vehicle is moved along a track, as depicted in step 904, to a position adjacent the selected storage bin.”), and Figs. 3, 5b. Accordingly, we find the system of JPAP ’213 has the capability of moving to a position proximate a laterally disposed storage location as well as a positon beneath the rail. Ex. 1005, 20 (Fig. 1). Based on the argument and evidence presented in the Petition, and the insufficiency of the responsive argument and evidence presented in the Patent Owner Response, as discussed above, we are persuaded that Petitioner has established, by a preponderance of the evidence, that claims 1, 3, 4, 9, 11–15, 17 and 20 are anticipated by JPAP ’213.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“paragraph 7 as providing the motivation for one of ordinary skill in the art to add the lateral transfer device from the conveyance truck of JPAP ’237 to moving body 3 in JPAP ’213 Figure 1. Dr. Sturges, moreover, does not provide a reasoned analysis based on the disclosures and embodiments of JPAP ’213 and JPAP ’237, in the context of the knowledge and skill level of a degreed engineer with 3–5 years of experience developing automated material handling systems. Dr. Sturges does not explain why and how one of ordinary skill would have selected the lateral transfer device from the conveyance truck of JPAP ’237 for use with moving body 3 in JPAP ’213 Figure 1. Ex. 1028 ¶¶ 162–165. For example, there is no explanation of why one of ordinary skill would use the lateral transfer device from JPAP ’237, given that mechanically moveable storage tables already are used to effect lateral transfer of articles B on both sides of moving body 3 in JPAP ’213 Figure 1. See id. Even if the proposed modification were to be made, Dr. Sturges does not account for counterweight 51 in JPAP ’237, which extends laterally to the opposite side of extendable arm 42, or explain why the counterweight would not interfere with the articles and storage tables located on the opposite side of moving body 3 in JPAP ’213 Figure 1. Id.; see also Mot. Observ. 4–5 (quoting Ex. 2041, 70:22–71:15 (“Q. [Y]ou did not provide any testimony that the hoist vehicle of the JPAP ’213 reference can utilize the robotic arm on one side while maintaining the swinging shelves on the other side; correct? A. That’s correct.”)). To the extent Petitioner argues that Dr. Sturges has provided evidence on this point (Tr. 83:9–13), such evidence has not been cited in the Petition or the Reply, nor have we located such evidence. Pet. 48–58 (citing Ex. 1028 ¶¶ 57, 157– 196); Reply 12–13 (citing Ex. 1028 ¶¶ 162–65, and 169); Mot. Observ., 2–3 (quoting Ex. 2041, 71:23–72:9 (“Q. [Y]ou did not address whether it would have been necessary to change the functional relationship between the swinging shelf and the hoist vehicle of the JPAP ’213 reference; correct? A. That’s accurate.”)).10” slip op. at 32
- ExcludeMotion to exclude, deniedDenied
“D. Patent Owner’s Motion to Exclude Evidence Patent Owner seeks to exclude Exhibit 1038 and ¶¶ 3–4 of Exhibit 1040 filed by Petitioner with Petitioner’s Reply. Mot. Excl. 1 (Paper 47). Petitioner opposes the motion to exclude. Pet. Excl. Opp. 4–14 (Paper 56). Exhibit 1038 is a confidential product development plan dated September 25, 2002, and produced by Petitioner in this proceeding. Exhibit 1040 is a Second Declaration of Dr. Sturges, and paragraphs 3–4 contain his testimony explaining aspects of the confidential product development plan of Exhibit 1038. Petitioner relies on Exhibit 1038 and paragraphs 3–4 of Exhibit 1040 to rebut Patent Owner’s argument that Petitioner copied Patent Owner’s invention claimed in the ’172 patent. Reply 20, 22, and 25. Patent Owner seeks to exclude Exhibit 1038 and paragraphs 3–4 of Exhibit 1040 as irrelevant (Fed. R. Evid. 401, 402), inadmissible hearsay (Fed. R. 11 In view of our determination, we need not consider Patent Owner’s objective evidence of nonobviousness. See Transocean Offshore Deepwater Drilling, Inc., v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012) (“objective evidence of nonobviousness . . . may be sufficient to disprove or rebut a prima facie case of obviousness”). PO Resp. 46–60; see also Reply 18–25. Evid. 801(c)), and unauthenticated (Fed. R. Evid. 901). Mot. Excl. 1–8. We do not rely on or address Patent Owner’s asserted objective evidence of nonobviousness or Petitioner’s rebuttal evidence in our Decision. Therefore, Patent Owner’s motion to exclude Exhibits 1038 and paragraphs 3–4 of Exhibit 1040 is dismissed as moot.” slip op. at 36
Patent outcomesUS 8,197,172 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 8,197,172 - Apple Inc. v. THX Ltd.Some claims unpatentablePTAB · Jun 9, 2015 · IPR2014-00235 · APJ Brian P Murphy · IPR · Final written decision
Claims 1 and 2 are unpatentable as obvious over Tomonori and Sadaie; claim 3 was not shown unpatentable over Tomonori, Virva, and Sadaie.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“In sum, the ’483 patent describes and claims a sound reflecting surface that redirects sound waves output from the speaker towards the elongate output slot, whereas sound damping material absorbs standing waves inside the sound duct. The ’483 patent goes to great lengths to distinguish a sound reflecting surface from a sound damping surface. Furthermore, given that “sound damping material” is different from a “sound reflecting surface” and both are recited as separate claim limitations, it follows that a sound reflecting surface is not made of sound damping material. For the reasons given above, we construe “sound reflecting surface,” in the context of claim 1 and in light of the ’483 patent specification, as “a surface that redirects sound waves output from a speaker, not made of sound damping material.”” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“2. Other Terms Petitioner proposes to construe additional claim terms. Pet. 11–14. We determine that no express construction of these additional terms is necessary for purposes of this decision.” slip op. at 13
- Skill levelSkill level petitioner adoptedDecided for petitioner
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMotivation not foundMixed
“suppress standing waves inside a duct. Pet. 44 (citing Ex. 1002 ¶ 112). Dr. Vipperman identifies the reason for Sadaie’s use of side wall sound damping as enabling “the sharpness of a fundamental wave resonance of a standing wave determined by the length of the sound path . . . to be suppressed because a substantial length of the sound path cannot be primarily determined.” Ex. 1002 ¶ 112 (citing Ex. 1003, 14). We agree with Petitioner’s reasoning, therefore, that “[e]xtending the damping material of Tomonori along the sidewalls of the duct,” as taught by Sadaie, would have been one of a limited number of known solutions further minimizing the presence of spurious resonances and standing waves inside the duct. Id. at 45 (citing Ex. 1002 ¶ 113). The quoted statements of Petitioner and Dr. Vipperman with respect to Tomonori and Sadaie are consistent with the principles set forth in KSR.10 Petitioner and Dr. Vipperman provide an analysis of why one of ordinary skill in the art of speaker design would have been motivated by Sadaie’s disclosure of side wall sound damping to modify Tomonori’s narrow sound duct, such that sound damping material forms the sides of the sound duct but not the bottom (sound reflecting) surface. In particular, Dr. Vipperman’s Declaration provides a sufficient analysis to support the obvious modification of Tomonori’s narrow profile speaker, by a speaker designer of ordinary skill, such that “sound damping material form[s] sides of the sound duct” to help suppress the presence of spurious resonances and standing waves inside the duct. Ex. 1002 ¶¶ 112, 113.” slip op. at 28
Patent outcomesUS 7,433,483 mixedClaim construction§ 103 obviousnesscites KSRPatents in suitUS 7,433,483
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.