- Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - Encube Ethicals PTV. Ltd. v. Dermavant Sciences GmbHAdverse judgmentPTAB · Mar 7, 2025 · IPR2024-00834 · APJ Tawen Chang · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner on all challenged claims, 1–4, 6–10, 16, 18, 21, and 22, following their disclaimer.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Terminate Proceeding and Parties’ Joint Motion for Entry of Adverse Judgment (collectively “Motion”). The parties jointly request that the Board enter adverse judgment in light of the disclaimer filed by Patent Owner disclaiming all challenged claims. Mot. 1 (citing 37 C.F.R. § 42.73(b)(2)). The Motion attaches as an exhibit a disclaimer under 37 C.F.R. § 1.321(a), filed January 28, 2025, of claims 1–4, 6–10, 16, 18, 21, and 22 of the ’088 patent, which constitute all of the claims challenged in the inter partes review. Ex. 2001; Paper 1, 3.” slip op. at 2
- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Denied
“Accordingly, we grant the Parties’ Joint Motion for Entry of Adverse Judgment. This Adverse Judgment is sufficient to dispose of this proceeding and Patent Owner’s Motion to Terminate is denied as moot.1” slip op. at 3
NonePatents in suitUS 11,590,088 - Biofrontera Inc. / Biofrontera Bioscience GmbH et al. v. Sun Pharmaceutical Industries, Inc.InstitutedPTAB · Feb 24, 2025 · IPR2024-01312 · APJ Erica A Franklin · IPR · Institution
The Board instituted review of claims 1, 2, 4-6, 16, 17, and 19-21 on all asserted grounds, finding a reasonable likelihood of unpatentability over Lundahl and Larsen.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“justification for requiring a POSITA to have both an engineering degree and a medical degree. We agree, insofar as Petitioner has not clearly set out any particular explanation or evidence in support of its dual-degree requirement. In all other respects, we note that the parties’ proposed definitions are largely similar. Because we determine that Patent Owner’s proposed definition is reasonable and consistent with the ’028 patent and the cited art, we adopt Patent Owner’s definition for purposes of this Decision. In any event, our decision whether to institute does not turn on this level of skill determination.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“used to construe the claim in a civil action under 35 U.S.C. § 282(b); 37 C.F.R. § 100(b). Under that standard, claim terms “are generally given their ordinary and customary meaning” as understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner and Patent Owner assert that the Board need not construe any claims for the purpose of deciding whether to institute an inter partes review. Pet. 12; Prelim. Resp. 24. We agree.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Based on our review of the Petition, Petitioner explains that a driving motivation for a POSITA to modify Lundahl to include Larsen’s five panels is “to increase the flexibility of the device to ensure the light panels could be maintained at a distance of 2-4′′ from surface of the treatment area, whether the face, arm, or back, etc.” Pet. 29 (emphasis added). As Lundahl’s device is not flexible, and such flexibility would improve its ability to treat areas other than an average sized face, we determine, at this stage in the proceeding, that this motivation for the combination is sufficient.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightInstituted
“would have been motivated to modify Lundahl’s device by incorporating Larsen’s use of LEDs on the surface of the light applicators in place of Lundahl’s fluorescent tubes with a reasonable expectation of success. Prelim. Resp. 55. Patent Owner argues that Petitioner’s modification is based on improper hindsight bias because “Petitioner cherry-picks Larsen’s LEDs (together with the five panels) and purports to arrange them according to the [sic] ‘the uneven spacing’ of Lundahl’s fluorescent tubes.” Id. at 56 (citing Pet. 46–49; Ex. 1015 ¶¶ 175–80). According to Patent Owner, “Petitioner cannot on the one hand argue that a ‘POSITA would have understood that Larsen’s applicator is configured to uniformly illuminate a treatment surface of the patient,’ while on the other ignore Larsen’s teaching that the ‘light sources 17 are placed in regular row arrangements.’” Id. Patent Owner asserts that Petitioner’s proposed modification “mish-mashes aspects of Lundahl and Larsen ([while] avoiding the overall teachings of [challenged] claims.” Id. at 56–57. As discussed above, based on our consideration of the current record, Petitioner has provided sufficient motivation for employing Larsen’s flexible five panel configuration. These panels in Larsen already use LEDs as their light source. So, in our view, Petitioner’s incorporation of the five panels includes the lighting source, i.e., LEDs, for those panels taught by Larsen. Further, we note that Petitioner has persuasively asserted that a skilled artisan would have been motivated to use Larsen’s LEDs as they are more cost-efficient and last longer. See Pet. 31.” slip op. at 20
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,697,028 - Amphenol Corp. v. PPC Broadband, Inc.All claims unpatentablePTAB · Feb 19, 2025 · IPR2023-01363 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1, 2, and 10–13 are unpatentable as obvious over the stated combinations of Holmberg, Battey, Blankenship, and Cowen.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least 1 year of experience related to communication networks or the equivalent.” Pet. 7. Petitioner further contends that “[a]dditional education could substitute for professional experience or significant experience in the field could substitute for formal education.” Id. at 7–8 (citing Ex. 1003 ¶¶ 29–31). Dr. Eldering agrees that one of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least one year of experience related to communication networks or the equivalent.” Ex. 2001 ¶ 24. According to Dr. Eldering, “[a] person with less relevant practical experience but with additional experience would also qualify.” Id. Patent Owner contends that” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Although Patent Owner disagrees with Petitioner’s construction, it contends “the Board need not resolve this claim construction dispute because Petitioner’s proposed grounds 1-5 are all insufficient under either construction.” PO Resp. 19. Upon review of the parties’ arguments and the prior art of record, we determine that no claim terms require express construction for purposes of this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For example, we discuss below in Section III.G why we do not reach the claim construction issue presented by Petitioner.” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We find that Holmberg expressly contemplates using its wall box within multi-dwelling units, notes that multi-dwelling wall boxes in the prior art were “typically provided” on every floor, and discloses that the multi-dwelling wall boxes would contain optical couplings for each resident on a given floor. Ex. 1004 ¶¶ 7, 34; Pet. Reply 8–10. In view of these disclosures, we credit the testimony of Dr. Kiaei that one of ordinary skill in the art would have sought to use Holmberg’s wall box in multi-dwelling units and would have seen a need to access the area behind spice tray 230 to connect and disconnect subscribers. Ex. 1003 ¶ 92; Ex. 1033 ¶¶ 7–8. Moreover, even if Holmberg were limited to mid-span locations and distributing drop cables, as opposed to distribution cables for individual subscribers, as asserted by Patent Owner, Patent Owner does not dispute that a technician would still need periodic access to the area behind splice tray 230 in these mid-span devices. Tr. 38:3–39:1 (counsel agreeing that one would need to access the area behind splice tray 230 in Holmberg, albeit in “rare occasions”); Ex. 1003 ¶¶ 90–92; Ex. 1033 ¶¶ 7–8. Thus, whether used in the manner contemplated by Petitioner or Patent Owner, Petitioner persuasively demonstrates that access to the space behind splice tray 230 in Holmberg would be necessary. With access behind splice tray 230 required, Petitioner persuasively demonstrates that one of ordinary skill in the art would have seen a benefit to replacing Holmberg’s fasteners or screws with a hinged connection, such as that disclosed in Battey, to allow easier access to the area behind the splice tray. Pet. 41 (citing Ex. 1005 ¶ 39 (disclosing that a rotatable splice tray or shelf would “provide[] full and convenient access to the splice tray”)). First, Petitioner and Dr. Kiaei persuasively demonstrate that once the fibers of Holmberg are routed from behind splice tray 230 and the distribution cables spooled on this tray, a technician could not reasonably access fiber optic cables stored behind splice tray 230 without releasing or opening splice tray 230. Pet. Reply 14–15 (citing Ex. 1023, 60:20–61:15); Ex. 1033 ¶¶ 31–32. Second, Petitioner persuasively demonstrates that without a hinged connection, the technician would have to either hold the splice tray of Holmberg with one hand while performing the necessary routing and splicing steps, two screws would need to remain in place (essentially replicating a hinge), or the tray would have to be left to dangle, supported only by the routed and spliced fibers. Pet. Reply 19–20.” slip op. at 22
- Strike new argumentNew argument consideredDecided for petitioner
“Allegedly New Arguments on Reply Patent Owner contends that Petitioner’s arguments regarding the benefits of a hinged connection when performing the splicing and routing steps should be dismissed or ignored because they were improperly raised for the first time on reply. Sur-reply 19–20. We disagree. The Petition asserts that one of ordinary skill in the art would have sought to add a hinged connection, such as that disclosed in Battey, in Holmberg and would have seen a benefit to so doing. Pet. 40–44. Petitioner did not change its proposed combination or its stated rationale in its Reply. Rather, in response to Patent Owner’s counter-arguments, Petitioner expands upon the benefits of its proposed combination, i.e., the substitution of a hinged connection in place of fasteners. Pet. Reply 15–21. This is permissible, as a reply may properly expand on or extend previously raised arguments relating to the motivation to make the proposed changes to the prior art. See Rembrandt Diagnostics, LP v. Alere, Inc., 76 F.4th 1376, 1385 (Fed. Cir. 2023) (explaining that the reply arguments properly relied on the same legal ground, the same prior art references, and same legal argument—the motivation to make the proposed changes to the prior art reference).” slip op. at 25
Patent outcomesUS 9,008,483 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,008,483 - Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision
Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15
Patent outcomesUS 7,749,641 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - PTAB · Feb 6, 2025 · IPR2024-01212 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR of claims 1–27 on all petitioned grounds after finding a reasonable likelihood that claim 1 would be obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner demonstrates a reasonable likelihood of prevailing in showing that at least one of the challenged claims of the ’664 patent is unpatentable. Accordingly, we institute an inter partes review as to all the challenged claims of the ’664 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“According to Petitioner, the relevant technical field is “‘thermal ablation systems and methods,’ which includes ‘methods for performing Radio Frequency (RF) neurotomy.”’ Pet. 11 (citing Ex. 1003, 1:24–27). Relying on the testimony of Dr. Tucker, Petitioner contends that the ordinarily skilled artisan in this field would have had at least (i) a bachelor’s degree in biomedical engineering, or a related field, such as mechanical engineering, biomechanical engineering, or bioengineering, who also has at least 3 years of experience with thermal ablation system and methods; or (ii) an advanced degree in the same areas of academic study with at least 1 years of experience with thermal ablation systems and methods. Id. (citing Ex. 1034 ¶ 105) (paragraphing added). Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears consistent with the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that Petitioner’s open-ended language “at least” expands the ranges of education and experience indefinitely with no upper bound, thereby encompassing those of extraordinary skill. Therefore, we do not adopt this aspect of Petitioner’s formulation. B.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Claim Construction The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe claims in a civil action in federal district court. See 37 C.F.R. § 42.100(b)). In construing claims, district courts give claims their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1034 ¶ 106 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). On the presents record, we agree with Petitioner that no term requires express construction. C.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“through [1e]. Pet. 28–30. Petitioner further relies on “Racz as modified in view of Fitz and Lee,” with respect to elements [1e] through [1h]. See generally, id. at 30–47. Supported by the testimony of Dr. Tucker, Petitioner contends that one of ordinary skill in the art would have been motivated to combine the teachings of Racz, Fitz, and Lee with a reasonable expectation of success of arriving at the claimed invention. Id. at 1–6, 21–27; Ex. 1034 ¶¶ 132–149. In short, Petitioner contends that “[m]ost of the recited RF needle features—including an elongate cannula, a removable RF probe, a conductive tip, and a monopolar configuration—are conventional features disclosed in . . . Racz,” whereas Fitz discloses that a single-tip device, such as disclosed in Racz, “would produce limited ablation volumes and would have motivated a POSA to solve this problem by adding deployable filaments,” as recited in claim elements [1e] and [1f]. Id. at 4–5, 21–22. In addition to its reliance on the multiple electrode tips disclosed in Fitz, Petitioner contends that Lee would have “motivate[ed] a POSA to implement deployable filaments on the tip of Racz’s device using channels within the cannula,” and “also shows how the filaments can extend outwardly around the needle’s tip to advantageously expand and control the ablation volume.” Id. at 5–6. Accordingly, Petitioner contends, one of ordinary skill in the art “would have found it obvious to modify Racz’s device to include the well-known deployable filaments described in Fitz and Lee,” and would have implemented this combination as “a matter of routine engineering.” Id. at 6, 27.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,925,664 - PTAB · Feb 6, 2025 · IPR2024-01211 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 18–47 and 53–74 and all petition grounds, finding a reasonable likelihood that claims 18–25, 27, and 29–33 are obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1033 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner argues that, in view of these teachings in Racz and Lee, a skilled artisan would have found implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38) to be a routine engineering task. Pet. 39 (citing Ex. 1033 ¶ 179). According to Petitioner, a person of ordinary skill in the arts would have recognized that it would be appropriate to implement Lee’s perimeter filaments (22/1622) without including Lee’s central filament. Id. Petitioner asserts that Lee discloses that any number and arrangement of filaments may be implemented to provide a desired ablation volume. Id. at 38 (citing Ex. 1010 ¶¶ 103, 105, 106). Additionally, Petitioner argues, because Racz’s tip (14/38) is already active, a skilled artisan would have recognized that Lee’s central filament would not be necessary. Id. (citing Ex. 1009, col. 3, ll. 60–63, col. 4, ll. 18–23; Ex. 1033 ¶ 179). Petitioner therefore argues that a person of ordinary skill in the art a person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 40. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1033 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1033 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 41 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1033 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1033 ¶ 180). Furthermore, argues Petitioner, and to preserve the functionality of Racz’s removable electrical probe (22/52) and active tip (14/38) (and consistent with Lee’s teachings) a skilled artisan would have arranged the perimeter filaments, channels, and ramps around the internal perimeter of Racz’s cannula (10/33). Pet. 41 (citing Ex. 1010 ¶¶ 91, 92, 98, 102; Ex. 1033 ¶ 181). Petitioner recapitulates that Racz’s probe (22/52) is configured to extend the full length of the cannula’s shaft (12/34) to supply RF energy to the tip (14/38) and measure tissue temperature. Pet. 42. According to Petitioner, by omitting Lee’s central filament and arranging the perimeter filaments, channels, and ramps around the inner perimeter of Racz’s cannula (10/33), a skilled artisan could have implemented Lee’s perimeter filaments (22/1622) without obstructing Racz’s cannula (10/33). Id. at 40. Petitioner contends that this modification would preserve the functionality of Racz’s electrical probe (22/52), which is needed to transmit RF energy. Id. (citing Ex. 1033 ¶ 181–182).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688 - PTAB · Feb 6, 2025 · IPR2024-01210 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 1–17 and 48–52 on all asserted grounds, finding a reasonable likelihood that at least one claim was obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1032 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 35. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1032 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1032 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 39 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1032 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1032 ¶ 180).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688 - PTAB · Feb 6, 2025 · IPR2024-01209 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR on claims 1–27 and all petition grounds, finding a reasonable likelihood that at least one claim is obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears consistent with the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that Petitioner’s open-ended language “at least” expands the ranges of education and experience indefinitely with no upper bound, thereby encompassing those of extraordinary skill. Therefore, we do not adopt this aspect of Petitioner’s formulation. B.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1031 ¶ 106 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). On the presents record, we agree with Petitioner that no term requires express construction.” slip op. at 12
Claim constructioncites Phillips · KSRPatents in suitUS 10,966,782 - Opticis Co., Ltd. v. Inneos LLCAll claims unpatentablePTAB · Jan 29, 2025 · IPR2023-01256 · APJ Terry J Owens · IPR · Final written decision
Claims 1, 2, 6, 7, and 9 are unpatentable as obvious over Kurita and Lemoff, with the Board declining to reach the remaining grounds.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“We accept the level of ordinary skill in the art stated by Petitioner and agreed with by Patent Owner with the exception of the open-ended language appears consistent with the ’416 patent and the prior art of record.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“describe elements that are not affirmatively recited in the claims, and in view of the “bedrock principle of patent law that the claims of a patent define the invention,” we conclude that none of the unrecited limitations identified by Patent Owner are required by the claims. See Thorner v. Sony Entm’t Am. LLC, 669 F.3d 1362, 1366 (Fed. Cir. 2012) (explaining that the standard for disavowal is “exacting,” and the use of “the present invention” is not necessarily sufficient to meet this standard).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“art would not have modified Kurita in view of Lemoff because Lemoff positions the signal emitters near the fiber to emulate WDM without the need for an external optical multiplexer or a similar device and discourages using optical wavelength multiplexers for short distances because the complexity of the design is often cost prohibitive (PO Resp. 47–48), Lemoff does not appear to limit the usefulness of the fiber connector to any particular optical signal transmission distance. Petitioner relies upon Lemoff for a suggestion to combine Lemoff’s fiber connector configuration teachings with Kurita’s multiplexer teachings to enable fibers to be plugged Fig. 2) (Pet 29, 31; Reply 17–18). Regarding Patent Owner’s argument that one of ordinary skill in the art would not have combined Lemoff’s receptacle and ferrule with discrete components in Kurita because the fiber would need to be manually fixed and aligned with or without a ferrule and, therefore, would serve no purpose (PO Resp. 48), Lemoff’s fiber connector appears to fix and align the fiber adequately for wavelength division multiplexing without manual fixation or alignment being required (Ex. 1006, 5:65–6:2, Fig. 2; Reply 18). The challenged claims do not require any greater degree of fixing and alignment than that provided by Lemoff’s fiber connector. Regarding Patent Owner argument that Lemoff’s device is not physically combinable with Kurita’s WDM multiplexer due to Lemoff’s device’s small size (PO Resp. 47–48; Reply 17–18), “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference.... Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art” (In re Keller, 642 F.2d 413, 425 (CCPA 1981)). Accordingly, we are not persuaded by Patent Owner’s argument.” slip op. at 26
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“stopped single optical fiber because fixing it in place does not passively align it with the optical components (PO Resp. at 35–37) is not persuasive because fixing Kurita’s fiber (40) in place in accord with Lemoff’s teaching regarding the ferrule (255) inserted until being stopped by the receptacle (260) (Ex. 1006, 5:50–6:15, Fig. 2) would align Kurita’s optical array (20), and lens (30)) (Ex. 1004 Fig. 3) passively in the same manner that Lemoff’s ferrule (255), after being inserted until stopped by the receptacle (260), passively aligns the optical fiber (250) with the optical components (optical imaging element 220 and light emitters within emission apertures 120) (Ex. 1006, 5:50–6:15, Fig. 2; Reply 15–16). Regarding Patent Owner’s argument that the light from each of Kurita’s lasers (11) depicted in Figure 3 cannot pass through a separate focusing lens (30) pie shaped sector because the lasers (11) and collimating lenses (21) are arranged linearly rather than being arranged about a circular axis (PO Resp. at 37–42), we do not agree. Claim 1 requires “focusing means having n separate radial sectors on its surface, and each of said n collimated beams passes through a separate one of said n sectors of said focusing means” (Ex. 1001, 5:34–37), claim 2 requires “four lasers and four collimating lenses are each formed in a two-dimensional, two by two array [centered on the focal axis of lens 30], wherein said focusing means is a single focusing lens, and wherein each radial sector is a pie-shaped quadrant” (id. at 5:41–44), and claim 7 requires “focusing means having four separate quadrants on its surface, and each of said four collimated beams passes through a separate one of said quadrants of said focusing means” (id. at 6:35–38). Kurita meets those claim requirements. Kurita’s two by two array (10A) of lasers (11), collimating lens (21) array (20), and focusing lens (30) are shown in Kurita’s Figure 3 (cropped) as follows: The image is a portion of Kurita’s Figure 3 showing Kurita’s laser array, collimating lens array, and focusing lens (30). Relative to a point at the center of the laser array (10A) or the collimating lens array (20), each laser (11) and each collimating lens (21) is in a separate quadrant that can be a quadrant of a circle (pie-shape) on lens 30 (Reply 12– 13, Ex. 1003 ¶¶ 85–91).” slip op. at 23
Patent outcomesUS 7,198,416 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,198,416
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.