• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13

  • Expert testimonyPatent owner expert discountedMixed

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32

  Patent outcomesUS 10,583,449 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 10,583,449
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10

  Patent outcomesUS 9,527,094 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 9,527,094
• Evenflo Company, Inc. v. Baby Jogger II, LLCAll claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53

  Patent outcomesUS 11,731,682 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 11,731,682
• Trove Brands, LLC v. Camelbak Products, LLCSome claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00140 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6 are unpatentable as obvious; claims 7–18 were not shown unpatentable because Ribarits does not disclose a mouthpiece disposed on the pivotal mount.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 15 (citing Ex. 1002 ¶ 25). While CamelBak offers “a similar, though slightly different level,” it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision in this proceeding.” PO Resp. 27. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is 2 JP 2002-211613A, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 WO 2004/063042 A2, published July 29, 2004 (Ex. 1006, “Ribarits”). 4 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 5 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1008, “Hughes”). reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’250 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We will not bite. CamelBak’s original assertion—that the plain and ordinary meaning of the constituent parts of “mouth” and “piece” is “a piece (or part) that goes in the mouth”—underscores the fallacy of CamelBak’s additional physical contact requirement. PO Resp. 28 (emphasis added). Indeed, in support of that earlier assertion, CamelBak pointed to the very dictionary definition that we relied on at institution in construing “mouthpiece” as a part that either “goes in the mouth or to which the mouth is applied.” See id. at 31 (citing Ex. 2005 (emphasis added)). Even the original testimony of CamelBak’s own expert confirms that one skilled in the art “would understand that the term ‘mouthpiece’ is commonly known in the art as a part designed for a user’s mouth,” without any requirement for physical contact with the mouth. Ex. 2016 ¶ 58 (citing Ex. 2005) (emphasis added)). And nothing in the Specification limits that common understanding. Although, indisputably, the Specification contemplates an embodiment where the user physically contacts the mouthpiece with their teeth (i.e., a bite-actuated mouthpiece), it also contemplates an embodiment where the user simply inserts the bottle in their mouth and commences fluid flow by squeezing it. See Ex. 1001, 10:9–13. That disclosure supports a meaning of “mouthpiece” that simply requires placement in the opening of the user’s mouth without necessarily incurring physical contact with some portion of the mouth, such as the teeth, tongue, or lips. Indeed, had CamelBak wished to premise the meaning of “mouthpiece” on some sort of physical contact with the mouth, it knew how to do so. For instance, the independent claims of CamelBak’s earlier ’255 patent, which is the subject of the related 1137 IPR, are limited in just such a manner, as they recite “wherein the resilient mouthpiece is adapted to resiliently compress responsive to compressive forces applied to the resilient mouthpiece by a user’s teeth.” Ex. 2023, at 20–25 (emphasis added). Thus, we reject CamelBak’s attempt to narrow our construction of “mouthpiece” to something other than “a part (as of an instrument) that goes in the mouth or to which the mouth is applied.” Neither the intrinsic nor extrinsic evidence supports the narrower construction proposed by CamelBak.” slip op. at 11

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In reply, Trove argues that CamelBak’s “novel” construction that the mouthpiece moves with rotational motion about that same axis of rotation defined by the two joint as the pivotal mount and in the same direction as the pivotal mount “are inconsistent with the claim language’s plain and ordinary meaning and find no support in the intrinsic and extrinsic record.” See Pet. Reply 16. But, because we find that, when properly construed, the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis” requires that the mouthpiece rotate about the same axis and in the same direction as the pivotal mount, we reject Trove’s argument as unavailing. And, although we agree with Trove that Nakajima’s mouthpiece engages in counter-clockwise rotation about a “Second Pivot Axis” when Nakajima’s lid 4 is opened (id. at 20–22), that rotation is about a different axis—one defined by Nakajima’s protrusions 24 rather than the claimed “pivotal axis” defined by Nakajima’s hinge shafts 19—and in a different manner—an upward and counterclockwise path rather than the claimed “pivotal movement with the pivotal mount” defined by Nakajima’s lid 4. Finally, in an alternative theory, Trove and its expert use “image- manipulation tools” in an attempt to show that Nakajima’s mouthpiece engages in some initial “clockwise-rotation” with Nakajima’s lid as it is opened. See Pet. Reply 18–24. We reject that theory as entirely conjectural and unsupported by the evidence.” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We disagree. As discussed above, the proper construction of “for pivotal movement with the pivotal mount” requires that the mouthpiece mirror the rotational movement of the pivotal mount, i.e., rotate about the same axis as the pivotal mount and in the same direction as the pivotal mount. See supra § II.B.3. But Nakajima’s mouthpiece does neither, and, thus, does not exhibit the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis for . . . the pivotal mount axis,” as properly construed.” slip op. at 36

  Patent outcomesUS 11,851,250 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 11,851,250
• Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed

    “We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached

    “Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12

  Patent outcomesUS 11,780,689 unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 11,780,689
• Trove Brands, LLC v. Camelbak Products, LLCNo claims unpatentable
  PTAB · Jan 15, 2026 · IPR2024-01137 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–7 and 9–23 were not shown unpatentable under § 103 because the asserted combinations failed to teach the claimed mouthpiece movement or bite-actuated compression.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 18 (citing Ex. 1003 ¶ 26). While CamelBak offers a “slightly different” level of skill in the art, it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the 2 JP 2002-211613, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 US 6,070,767, issued June 6, 2000 (Ex. 1005, “Gardner”). 4 WO 2004/063042, published July 29, 2004 (Ex. 1006, “Ribarits”). 5 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 6 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1010, “Hughes”). Board’s decision on the patentability of the ’255 patent.” PO Resp. 14–15. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’255 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed patent owner constructionDecided for patent owner

    “not move in a circular path that maintains a constant radius about the axis of rotation defined by McDonough’s axle 30, but instead engages in up-and-down translational motion (red arrows) relative to axle 30. Thus, we understand CamelBak’s arguments during reexamination to have distinguished the purely rotational (i.e., circular) motion of the claimed mouthpiece from a mouthpiece that moves with a translational component relative to the pivotal axis. In sum, this reexamination history shows that, by distinguishing over the translational motion of McDonough’s mouthpiece, CamelBak limited the claimed mouthpiece to one that (1) maintains a circular path of constant radius about the pivotal mount’s axis of rotation, and (2) does not include a path that has a translational component relative to the pivotal axis. See Fenner Investments, Ltd. v. Cellco Partnership, 778 F.3d 1320, 1323 & 1325 (Fed. Cir. 2015) (“Any explanation, elaboration, or qualification presented by the inventor during patent examination is relevant, for the role of claim construction is to capture the scope of the actual invention that is disclosed, described, and patented.”) (internal quotation marks omitted); CVI/Beta Ventures, Inc. v. Tura LP, 112 F.3d 1146, 1158 (Fed. Cir. 1997) (“[T]hrough statements made during prosecution or reexamination an applicant for a patent or a patent owner, as the case may be, may commit to a particular meaning for a patent term, which meaning is then binding in litigation.”) (emphasis added); see also Univ. of Massachusetts v. L’Oreal S.A., 36 F.4th 1374, 1379 (Fed. Cir. 2022) (“The prosecution history, in particular, may be critical in interpreting disputed claim terms, and even where prosecution history statements do not rise to the level of unmistakable disavowal, they do inform the claim construction.”) (internal quotations omitted).” slip op. at 17

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Those detailed descriptions demonstrate that “adapted to,” as recited in claims 1 and 20, means that the resilient mouthpiece is specifically designed and configured to dispense fluid as a result of a user biting the mouthpiece, rather than merely being “capable of” being compressed. See Giannelli, 739 F.3d at 1379–80. Indeed, as disclosed, a distinct benefit of the resilient mouthpiece being bite-actuated “is that a user may position the drink bottle (and mouthpiece) to a desired drinking orientation, and even a partially or completely inverted orientation, without drink fluid being dispensed from the mouthpiece” until the user bites upon the mouthpiece to commence fluid flow through self-sealing valve to the user. Id. at 10:9–19. Thus, the intrinsic evidence, i.e., the specification and figures of the ’255 patent, confirm that the phrase “adapted to” means “designed or configured to” and is not satisfied by mere hypothetical capability. That is, as claimed, the resilient mouthpiece is designed or configured to compress based on actual forces applied by a user’s teeth, as opposed to merely being capable of compression based on the inherent nature of the mouthpiece’s material. C. Obviousness” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Although we agree with Trove that Nakajima’s mouthpiece engages in up-and-down movement relative to the pivot axis identified in Trove’s annotated figures, we disagree that Nakajima’s mouthpiece is “pivotal about an axis defined by the pair of lateral projections as [they] rotate within the pair of sockets,” as required by claim 1. As discussed above, the proper construction of this claim limitation requires that the mouthpiece moves with rotational motion in a circular path of constant radius about the pivotal axis defined by the pair of lateral projections. See supra § II.B.1. Nakajima, on the other hand, discloses that its mouthpiece moves with translational motion, i.e., up-and-down movement, relative to the pivotal axis defined by lateral projections 19 of Nakajima’s lid 4—“[T]he mouthpiece moves up and down in conjunction with the opening and closing of the lid.” Ex. 1004 ¶ 3 (emphasis added); see also id., Abstract (“[T]he mouthpiece 2 moves up and down in conjunction with the opening and closing of the lid 4.”). Indeed, although Trove relies exclusively on Nakajima’s disclosure of up-and-down movement for the mouthpiece, Trove never explains how such up-and-down movement equates to rotational motion required by the disputed limitation of claim 1. Nor can it.” slip op. at 28

  Patent outcomesUS 10,676,255 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 10,676,255
• Trove Brands, LLC v. Camelbak Products, LLCNo claims unpatentable
  PTAB · Oct 28, 2025 · IPR2024-00858 · APJ Carl M Defranco · IPR · Final written decision

  Claims 5–7 and 16–19 were not shown unpatentable under § 102 or § 103 because the cited references failed to disclose the claimed closure retention mechanism.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesPrior construction adoptedDecided for petitioner

    “1. “closure retention mechanism” Trove proposes that “closure retention mechanism” should be construed as a means-plus-function term under 35 U.S.C. § 112(f). See Pet. 18–19; Pet. Reply 1. CamelBak agrees. See PO Resp. 8. Indeed, subsequent to our institution decision, the district court in the parallel action held that the “closure retention mechanism” is a means-plus-function term governed by 35 U.S.C. § 112(f). See Ex. 2010, at 5–6. We see no reason to depart from that holding and adopt the district court’s reasoning in that regard as our own. See id. at 6–8.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with CamelBak that the plain language of the claim imposes a temporal condition on when the closure is received by the closure retention mechanism, namely, only after it is removed from the drink spout. In other words, the closure cannot be in engagement with, i.e., “received by,” the closure retention mechanism while it remains on the drink spout. This interpretation is consistent with the specification, which repeatedly states that spaced-apart tabs 56 “engage” the closure when it is removed from the spout and moved to the stowed position. Ex. 1001, 8:58–60 (“tabs 56 . . . are configured to selectively engage and retain, or otherwise grip, the closure in the stowed position”); 9:32–39 (“when the closure is positioned between and/or otherwise in engagement with the tabs, the tabs engage the closure across the maximum width, such as with the tabs resiliently deflecting, bending, or compressing to accommodate the greater width of the closure”); 11:36–39 (“the closure retention mechanism 54 may be configured to engage . . . the closure to operatively retain the closure in its stowed configuration.”); 13:26–31 (“When the closure is operatively positioned within the closed perimeter of the handle into its stowed position . . . such closure is compressed slightly.”) (emphases added). Moreover, the specification describes this engagement as occurring by means of a “friction-fit” or “snap-fit” arrangement (id. at 8:50–52, 14:33– 36), which confirms that the closure is not permanently engaged with the tabs, but rather moved into engagement with the tabs, i.e., “received by the closure retention mechanism” per the plain language of the claim. Thus, the intrinsic evidence—the claim language and the specification—supports a construction that imposes a temporal condition on the recited function of the claimed “closure retention mechanism” such that it receives the closure only after the closure has been removed from the drink spout, meaning the closure is not engaged with the closure retention mechanism before it is selectively removed from the drink spout.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “3. “retain the closure in a stowed position” CamelBak contends that this limitation should be construed to mean “to hold or keep the closure in a position removed from the drink spout.” PO Resp. 13–14; PO Sur-Reply 4. Although Trove contends that CamelBak’s construction “impermissibly rewrites” the claim language, Trove nonetheless “does not disagree that it encompasses ‘hold or keep the Indeed, the claim language itself already contemplates just such a construction by expressly reciting that the closure retention mechanism “selectively retain[s] the closure in a stowed position relative to the handle when the closure is selectively removed from the drink spout.” Ex. 1001, 18:63–66 (emphasis added). As such, we determine that further construction of this limitation is not necessary to resolve the present dispute.” slip op. at 14

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove proposes that one of ordinary skill in the art would have had— an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products . . . [and that] [m]ore work experience may substitute for a lower level of education, and vice versa. Pet. 17–18 (citing Ex. 1003 ¶¶ 25–30). 2 US 9,272,822 B2, issued Mar. 1, 2016 (Ex. 1004, “Samartgis”). 3 EP 2 177 447 A1, published Apr. 21, 2010 (Ex. 1011, “Gorskey”). 4 US 2006/0006578 A1, published Jan. 12, 2006 (Ex. 1012, “Johnson”). 5 US 7,753,240 B2, issued July 13, 2010 (Ex. 1005, “Leoncavallo”). 6 US D586,184 S, issued Feb. 10, 2009 (Ex. 1006, “Miller”). A person having ordinary skill in the art would have had a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa. See PO Resp. 7 (citing Ex. 2009 ¶¶ 61–68). Because CamelBak simply paraphrases Trove’s slightly more detailed definition of the level of skill in the art, we adopt Trove’s definition, as it appears reasonable and consistent with the asserted prior art and the ’252 patent.” slip op. at 6

  Patent outcomesUS 8,905,252 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 8,905,252
• Under Armour, Inc. v. Athalonz, LLCAll claims unpatentable
  PTAB · Sep 11, 2025 · IPR2024-00636 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–8 are unpatentable as obvious over Kim; the Board did not reach the four other instituted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Based on the full record, we determine that Petitioner’s proposed level of skill is reasonable and consistent with the ’786 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art for purposes of this Decision.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Based on the full record, we maintain that it is unnecessary to explicitly construe “athletic positioning” because its meaning is already captured in the claim through the recitation of the relationship between the various slopes of the sole that provide “athletic positioning” of the foot. See Ex. 1001, 44:2–14. The recitations of a “first slope,” “second slope,” “third slope,” and “reference slope” translate into the relative heights proposed in adopt Patent Owner’s proposed construction because it incorporates the specification’s consistent descriptions of “athletic positioning” in terms of relative heights and slopes. For example, one embodiment of an “athletic positioning shape” is where “the heel platform may be 10 to 30 mm higher” than “the toe cup and/or the ball of foot cup.” [Ex. 1001], 13:38–45. Another embodiment discloses “an athletic positioning sole that includes an overall geometric shape” including “the heel of the sole [at] a particular height (e.g., h1, which may be 1’s to 10’s of mm) that slopes at an angle (e.g., Ø1) to the toe on the inside edge of the sole” which “may have a height of zero to a few millimeters.” Id., 17:54–62. PO Resp. 29. However, we find Patent Owner’s contention regarding particular heights and specific angles attempts to import limitations from the Specification into claims. Superguide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). Based on the full record, we determine that express claim construction of “athletic positioning” is not necessary to resolve the present dispute. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “8. Conclusion for Ground 1 We have considered all of the arguments and evidence adduced at trial. For the reasons explained, we find Petitioner has persuasively demonstrated that Kim teaches or suggests all limitations of claims 1–8. We also find that the value of Patent Owner’s objective evidence of non-obviousness is weak in comparison to the evidence regarding the prior art under the first three Graham factors. Accordingly, we find Petitioner has shown by a preponderance of the evidence that claims 1–8 of the ’786 patent would have been obvious over Kim.” slip op. at 39

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “Based on the full record, we determine that Patent Owner fails to show nexus between the claimed invention and the asserted objective indicia of nonobviousness. PO Resp. 70–78; PO Sur-reply 25–28. Other than asserting that “the requisite nexus exists here” (PO Resp. 71), and citing to the Declaration testimony of Mr. Markison (id. (citing Ex. 2008 ¶ 322)), the Patent Owner response does not provide an analysis of Patent Owner’s product with respect to the claims of the ’768 patent, and thus does not demonstrate nexus. To the extent Patent Owner references Mr. Markison’s testimony, Mr. Markison’s testimony consists solely of the statement that Patent Owner “sells and markets golf and baseball shoes that embody the claims of the ’786 patent” with reference to an exhibit from district court litigation. See Ex. 2008 ¶ 322 (citing Ex. 2014). We find Patent Owner’s reliance on Mr. Markison’s testimony to be insufficient to establish a rebuttable presumption of nexus. Thus, Patent Owner is not entitled to a rebuttable presumption of nexus, because Patent Owner has not shown that the asserted evidence is tied to a specific product that is the disclosed and claimed invention. Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019). Patent Owner also does not provide any evidence that the asserted” slip op. at 33

  Patent outcomesUS 10,674,786 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,674,786
• Under Armour, Inc. v. Athalonz, LLCAll claims unpatentable
  PTAB · Sep 10, 2025 · IPR2024-00640 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–5, 7, 9–15, and 17 are unpatentable: claims 10, 11, 15, and 17 over Won, and claims 1–5, 7, 9, and 12–14 over Won and Talarico ’911.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art “would have (1) at least a B.S. or equivalent degree related to industrial or product design and at least two years’ experience designing or developing athletic shoes; or (2) at least five years designing or developing athletic shoes.” Pet. 17–18 (citing Ex. 1002 ¶ 31). According to Petitioner, “the claims are obvious in view of any reasonable definition of a [person of ordinary skill in the art].” Id. at 21. For institution, we preliminarily adopted Petitioner’s proposal. Inst. Dec. 4. “For purposes of this proceeding, Patent Owner does not dispute Petitioner’s level of ordinary skill.” PO Resp. 13 (citing Pet. 17–18). Patent Owner contends that its declarant Mr. Markison “far exceeds the proposed level of ordinary skill in the art” and, because he is registered as a patent attorney and licensed as an attorney, “can offer good faith and objective opinions on the issues in this proceeding.” Id. at 13–14 (citing Ex. 2008 ¶¶ 11–13, 17–30, 42–44). Based on the full record, we maintain and affirm that one of ordinary skill in the art “would have (1) at least a B.S. or equivalent degree related to industrial or product design and at least two years’ experience designing or developing athletic shoes; or (2) at least five years designing or developing athletic shoes.” Pet. 20–21 (citing Ex. 1002 ¶ 30); Inst. Dec. 9; Ex. 1002 ¶ 30; Ex. 2008 ¶ 44.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Petitioner notes that, although claim 1 recites a heel platform made of a “first material” and a forefoot platform made of a “second material,” the first and second materials can be the same based on Patent Owner’s apparent interpretation in related litigation. Pet. 27 n.1 (citing Ex. 1012, 30–44). Petitioner applies Patent Owner’s apparent interpretation to the challenges of this proceeding “[w]ithout conceding alternative arguments.” Id. At institution, we were persuaded by Patent Owner’s arguments and adopted a construction that the “first” and “second” materials are “different in some manner.” Inst. Dec. 7–8. Patent Owner responds that we should maintain the same construction and disputes Petitioner’s evidence that the “first” and “second” materials can be the same material. PO Resp. 15–19 (citing Pet. 27 n.1; Inst. Dec. 8, 12–13; Ex. 1012, Ex. E, 38, 52; Ex. 2014, 15). Patent Owner also argues that Petitioner should not be allowed to present new arguments or evidence in reply. Id. at 19–21. Petitioner replies that interpreting “first” and “second” materials to be different materials contradicts the plain language of the claims, the Specification, and Patent Owner’s infringement contentions. Pet. Reply 1–5 (citing Pet. 27 n.1; Prelim. Resp. 16–17; PO Resp. 16–18; Ex. 1001, 10:9– 19, 17:52–54, 21:64–22:4, 27:47–51, Figs. 43, 49, claims 1, 6; Ex. 1023, 47:1–48:1, 215:6–217:12, 224:13–225:19; Ex. 1025, 319; Ex. 1026). Patent Owner replies that Petitioner presents new arguments and evidence in reply. PO Sur-reply 5–9 (citing Pet. 27 n.1; Inst. Dec. 13; PO Resp. 16–21; Pet. Reply 1–3, 14 n.1; Paper 19). Patent Owner also argues that, even if Petitioner’s asserted new arguments and evidence are considered, they fail to support an interpretation of “first” and “second” Resp. 16–17; Pet. Reply 1–3; Ex. 1001, 17:50–54, 27:50–54, Figs. 43, 93; Ex. 1023, 215:6–217:12; Ex. 2014, 19–22)” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “4. Other Terms Based on the full record, express interpretation of other terms is not necessary to resolve the parties’ dispute. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 13

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedMixed

    “Patent Owner does not satisfy its “burden of proof to establish that it is entitled to the requested relief.” 37 C.F.R. § 42.20(c). Evidence of how the inventor viewed claim terms can be useful in considering claim interpretation, and, thus, we agree with Petitioner that the exhibit is relevant. For the reasons stated below, however, we do not need to rely on the exhibit. Accordingly, Patent Owner’s Motion to Exclude Exhibit 1024 is dismissed as moot.” slip op. at 6

  Patent outcomesUS 11,510,456 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,510,456

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.