- Cambridge Industries USA, Inc. / Accelight Technologies, Inc. v. Applied Optoelectronics, Inc.No claims unpatentablePTAB · Jul 27, 2026 · IPR2025-01570 · APJ Monica S Ullagaddi · IPR · Final written decision
The majority held claims 1–19 not shown unpatentable: Wang did not anticipate claims 1–10, and Wang with Xiong did not render claims 11–19 obvious.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Patent is self-explanatory and would have been recognized by a [person of ordinary skill in the art] as having plain and ordinary meanings.” Pet. 10. “Petitioner submits that no special constructions are required” because “the claim terms appear understandable in the context of the disclosure provided by the specification of the ’690 Patent.” Id. (citing Ex. 1003 ¶ 58). Patent Owner “agrees that the claim terms should be given their plain and ordinary meaning as understood by a [person of ordinary skill in the art].” PO Resp. 10. After reviewing the arguments and evidence before us, we determine that we do not need to expressly construe any claim term to resolve any controversy in the proceeding. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- BurdenNot shown unpatentable
“Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner sufficiently establishes that claim 1 is unpatentable under 35 U.S.C. § 102 as anticipated by Wang by a preponderance of the evidence.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12
Patent outcomesUS 10,788,690 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,788,690 - Micron Technology, Inc. v. Yangtze Memory Technologies Co., Ltd.No claims unpatentablePTAB · Jul 21, 2026 · IPR2025-00190 · APJ Kimberly Mcgraw · IPR · Final written decision
Claims 1, 3–11, 13, and 14 were not shown unpatentable because Dong did not disclose the claimed vertical wordline arrangement, and the proposed 3D NAND combination lacked support for motivation and reasonable expectation of success.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“understanding that the claim term “from bottom to top” refers to the vertical arrangement of word lines in the memory portions from bottom to top and not from source end to drain end, as asserted by Petitioner. Inst. Dec. 17. In other words, the claim terms describing the first and second portions having word lines “from top to bottom” refer to the relative vertical location of the word lines within the memory portions and not to location of the word lines relative to the source or drain. Our construction is based on the plain and ordinary meaning of the express language of the independent claims, which states that the second memory portion is formed either above or below the first memory portion. The forming of one memory portion above or below another portion establishes a top and bottom in relation to those portions. For example, claim 5 is directed to a “program method of memory” that requires a second portion formed above the first portion. A second memory portion that is formed above a first memory portion is on top relative to the first portion. Similarly, claims 1 and 1 and 11, which recite a memory having a second portion formed below a first portion, establish that the second portion is on the bottom relative to the first portion. Thus, the claim language itself establishes the vertical locations of the memory portions relative to each other (e.g., a second memory portion that is above the first portion is on top, relative to the first portion). It follows that claim terms referring to the top and bottom of word lines within the memory portions also refer to relative vertical locations of the word lines within the memory portions. Thus, we understand the plain and ordinary meaning of claim” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner
“In our Decision, we treated the preambles of claims 5 and 11 as limiting, noting that these preambles provide antecedent basis for the word line limitations recited in the body of their respective claim. Dec. 14–15, 8. Neither party disputes that the preambles of claims 5 and 11 are limiting. See PO Resp. 34–35 (agreeing that the preambles are limiting); see generally Reply 1–6 (not disputing that the preambles are limiting). We maintain our construction of the preambles in this Decision.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“we consider the level of ordinary skill at the time of filing. 35 U.S.C. § 103; see also Graham, 383 U.S. at 17 (discussing pre-AIA obviousness). Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had a had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) NAND memory devices (including issues relating to the operation, e.g., programming, of said devices), or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience). Pet. 22 (citing Ex. 1004 ¶¶ 40–42). Petitioner also asserts that a POSITA would have been aware of and generally knowledgeable about NAND memory’s structure and fabrication, its component parts, how it operates, and how it is controlled. Id. at 22–23 (citing Ex. 1004 ¶ 41). In the Institution Decision, we adopted the assessment offered by Petitioner, which Patent Owner did not contest. Inst. Dec. 13. Following institution, Patent Owner stated it does not dispute Petitioner’s definition of a POSITA. PO Resp. 9 (citing Khatri Dec. ¶¶ 42–47). Because Petitioner’s definition of the level of skill in the art appears consistent with the ’941 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9
- Expert testimonyPatent owner expert creditedOther
“We disagree and find that Dong’s Figure 5a does not depict wordlines in a physical vertical orientation, but rather depicts voltage diagrams. We agree with Patent Owner’s argument, supported by persuasive testimony by Dr. Khatri, that a POSITA would have understood that Dong’s voltage charts (e.g., Fig. 5a) simply represent which voltages are applied to which word lines and do not depict the physical orientation of the wordlines. See, e.g., Ex. 2028 ¶ 171 (citing Ex. 1005 ¶ 20; Ex. 1009 ¶¶ 52–54). As Dr. Khatri explains, Dong Figures 5a–5h depict different examples of self-boosting modes showing voltages applied differently to the wordlines and are not intended to depict the physical orientation of these word lines. Ex. 2028 ¶ 171; see also Sur-reply 11–12 (citing Ex. 1005 ¶¶ 47, 65, 63–67; Ex. 2028 ¶¶ 177–186). We agree with Dr. Kahtri’s persuasive testimony that a POSITA would understand that Figures 5a–5h are illustrated vertically, but do not represent the actual physical arrangement of the word lines in memory, which are shown to be horizontal in Dong’s Figure 4. See, e.g., Ex. 2028 ¶ 172 (citing Ex. 1005 ¶¶ 20, 45, 47, 87).” slip op. at 24
Patent outcomesUS 11,568,941 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,568,941 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonNo claims unpatentablePTAB · May 29, 2026 · IPR2025-00349 · APJ Jason M Repko · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Avellan did not disclose the claimed sequence of screen captures used to assemble a media stream.
RulingsFinal written decision- Skill levelOther
“Patent Owner submits a similar definition and does not dispute the Petition’s characterization of the level of ordinary skill in the art. PO Resp. 22. No express finding is necessary. The level of ordinary skill in the art is reflected by the prior art of record. Any perceived difference in how each party characterizes a POSITA does not change our analysis or conclusions.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“on ordinary and customary meaning. Pet. 14–15; PO Resp. 22. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding.” slip op. at 6
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“c. Analysis “A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros. v. Union Oil Co. of California, 814 F.2d 628, 631 (Fed. Cir. 1987). We are persuaded by Patent Owner’s argument that Avellan does not anticipate claim 1 because it does not assemble a media stream of multimedia items using the recited screen captures. See PO Resp. 26–29. We agree with Patent Owner that the plain language of the claim requires more than transmitting individual media items. Sur-reply 21. To the extent that Avellan captures images, those images do not meet the claimed requirements for a “temporal sequence of screen captures” in the independent claims, which must (1) be of the web page rendered by a browser, (2) “define all the content of the web page at a given time,” (3) “illustrate a dynamic change of at least a portion of the content over time” when two of them are compared, and (4) used to assemble “the at least one media stream.” Rather, the record better supports Patent Owner’s argument that Avellan transmits the multimedia items separate from any media stream assembled from screen captures. PO Resp. 26–29; Sur-reply 21.” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“All other challenged claims require the “generating” and “assembling” operations because they depend from claims 1, 12, or 17. Petitioner does not allege that the additional references—Durante, Ma, Suzuki, Wanamaker, Heikens, Matthews, or Wilsher—teach or suggest the “temporal sequence of screen captures” recited in claim 1. Rather, Petitioner’s reasoning in the challenges to the dependent claims pertaining to the screen captures mirror the rationale presented in the independent claim. See, e.g., Pet. 25 (arguing that Avellan’s screen captures correspond to the video content in the challenge to claim 2), 26–27 (arguing that Avellan obtains screen captures from a playback of a video on the webpage in the challenge to claim 4). Petitioner’s argument that Avellan teaches or suggests these operations in the grounds based on obviousness under 35 U.S.C. § 103 depend on the reasoning and insufficiently supported characterizations of Avellan in the challenges based on 35 U.S.C. § 102, as discussed above. See Pet. 40–60. grounds based on anticipation under 35 U.S.C. § 102 or teaches or suggests these operations in the grounds based on obviousness under 35 U.S.C. § 103, Petitioner has not met its burden to show that any challenged claim is unpatentable as anticipated by Avellan or obvious over any of the combinations of Avellan and the other cited references.” slip op. at 15
Patent outcomesUS 10,123,074 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,123,074 - Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.No claims unpatentablePTAB · Nov 5, 2025 · IPR2024-00792 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–6 were not shown unpatentable because the asserted references did not establish the claimed bias voltages and pre-verify stage.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 5–6. Because Petitioner’s definition of the level of skill in the art is consistent with the ’957 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 6
- Expert testimonyPatent owner expert creditedOther
“It is within our discretion to assign the appropriate weight to Dr. Przybylski’s testimony. See, e.g., Yorkey v. Diab, 601 F.3d 1279, 1284 (Fed. Cir. 2010) (holding that the Board has discretion to give more weight to one item of evidence over another “unless no reasonable trier of fact could have done so”); In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declaration and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). On this record, we decline to generally discount Dr. Przybylski’s based on Petitioner’s contentions. When assigning upon which the testimony is based. See PTAB Consolidated Trial Practice Guide 40–41 (Nov. 2019). In our analysis of the asserted grounds of unpatentability, we weigh Dr. Przybylski’s testimony accordingly.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record and the arguments raised by the parties, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 7
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“claim 1 would have been obvious over the combined teachings of Hongtao and Yu by a preponderance of the evidence. 35 U.S.C. § 316(e) (2018); see also Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). After considering the parties’ arguments and evidence of record, and weighing the testimony of Dr. Liu and Dr. Przybylski, we are not persuaded that Petitioner meets its burden of establishing, by a preponderance of the evidence, that Hongtao teaches or suggests applying a second bias voltage that is smaller than the first bias voltage in the verify stage as recited in limitation [1.d]. Hongtao is silent with respect to the magnitudes of the pre-conduction and conduction voltages. Hongtao teaches that “a pre-conduction voltage is applied to both the unselected word line and the selected word line to turn on the channels of the selected string and the unselected string.” Ex. 1005 ¶ 23. Hongtao then teaches that, in the reading phase, “[t]he gates of the unselected memory cells on the selected string are applied with a conduction voltage through the unselected word lines.” Id. ¶ 25. Hongtao, however, describes the magnitudes of the pre-conduction and conduction relative to each other. See id. ¶¶ 21–26. Petitioner and Dr. Liu point to Hongtao’s statement that “the greater the conduction voltage, the greater the read disturbance” to support its contention that the conduction voltage is smaller than the pre-conduction voltage, but that statement refers to the relationship between conduction voltage and the read interference it causes and does not compare the conduction voltage to the pre-conduction voltage. See Pet. 40 (citing Ex. 1005 ¶ 26); Ex. 1003 ¶ 120 (citing Ex. 1005 ¶ 26). We also find credible Dr. Przybylski’s testimony that Hongtao lacks the details needed to determine how the gate voltages develop over time, in particular the length of the pre-conduction period. See Ex. 2003 ¶ 96. Dr. Przybylski’s testimony is consistent with the ’957 patent’s teaching that when the pre-pulse time is long enough that the bias voltages are fully developed before the TSG transistor is switched off at the unselected memory cell string, hot carrier injection “may not be generated from the selected memory cell to the upper adjacent memory cell of the selected memory cell in the selected memory cell.” Ex. 1001, 11:60–12:1. In contrast, when the pre-pulse time is insufficient for the bias voltages to fully develop, hot carrier injection may be generated. Id. at 12:1–9. And we are not persuaded that Petitioner and Dr. Liu sufficiently rebut Dr. Przybylski’s persuasive testimony that casts doubt on Petitioner’s contention that Hongtao teaches a second bias voltage that is smaller than a first bias voltage as recited in limitation [1.d]. For example, Dr. Liu’s testimony that Hongtao teaches applying voltages on gate terminals does not adequately address Patent Owner’s argument and Dr. Przybylski’s testimony that Hongtao depicts target values for the word line voltages instead of the See Ex. 1027 ¶¶ 16–40. Neither Petitioner nor Dr. Liu adequately establish that Hongtao’s applied voltages are sufficiently developed such that the preconduction voltage actually is bigger than the conduction voltage. Petitioner’s argument that Hongtao teaches or discloses a second bias voltage that is smaller than the first bias voltage hinges on a POSITA’s interpretation of Hongtao’s Figure 2. In light of Hongtao’s dearth of details regarding the absolute or relative magnitudes of the pre-conduction and conduction voltages, and Dr. Przybylski’s unrebutted testimony that Hongtao does not provide sufficient information to ascertain the actual bias voltages that will be applied on the gate terminals of the memory cells over time, we are not persuaded that Petitioner carries its burden of establishing that Hongtao discloses limitation [1.d]. For these reasons, we determine that Petitioner does not establish by a preponderance of the evidence, that independent claim 1, and claims 2–6 that depend, directly or indirectly, therefrom, would have been obvious over the combined teachings of Hongtao and Yu.” slip op. at 15
Patent outcomesUS 11,468,957 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,468,957 - Trove Brands, LLC v. Camelbak Products, LLCNo claims unpatentablePTAB · Oct 28, 2025 · IPR2024-00858 · APJ Carl M Defranco · IPR · Final written decision
Claims 5–7 and 16–19 were not shown unpatentable under § 102 or § 103 because the cited references failed to disclose the claimed closure retention mechanism.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesPrior construction adoptedDecided for petitioner
“1. “closure retention mechanism” Trove proposes that “closure retention mechanism” should be construed as a means-plus-function term under 35 U.S.C. § 112(f). See Pet. 18–19; Pet. Reply 1. CamelBak agrees. See PO Resp. 8. Indeed, subsequent to our institution decision, the district court in the parallel action held that the “closure retention mechanism” is a means-plus-function term governed by 35 U.S.C. § 112(f). See Ex. 2010, at 5–6. We see no reason to depart from that holding and adopt the district court’s reasoning in that regard as our own. See id. at 6–8.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We agree with CamelBak that the plain language of the claim imposes a temporal condition on when the closure is received by the closure retention mechanism, namely, only after it is removed from the drink spout. In other words, the closure cannot be in engagement with, i.e., “received by,” the closure retention mechanism while it remains on the drink spout. This interpretation is consistent with the specification, which repeatedly states that spaced-apart tabs 56 “engage” the closure when it is removed from the spout and moved to the stowed position. Ex. 1001, 8:58–60 (“tabs 56 . . . are configured to selectively engage and retain, or otherwise grip, the closure in the stowed position”); 9:32–39 (“when the closure is positioned between and/or otherwise in engagement with the tabs, the tabs engage the closure across the maximum width, such as with the tabs resiliently deflecting, bending, or compressing to accommodate the greater width of the closure”); 11:36–39 (“the closure retention mechanism 54 may be configured to engage . . . the closure to operatively retain the closure in its stowed configuration.”); 13:26–31 (“When the closure is operatively positioned within the closed perimeter of the handle into its stowed position . . . such closure is compressed slightly.”) (emphases added). Moreover, the specification describes this engagement as occurring by means of a “friction-fit” or “snap-fit” arrangement (id. at 8:50–52, 14:33– 36), which confirms that the closure is not permanently engaged with the tabs, but rather moved into engagement with the tabs, i.e., “received by the closure retention mechanism” per the plain language of the claim. Thus, the intrinsic evidence—the claim language and the specification—supports a construction that imposes a temporal condition on the recited function of the claimed “closure retention mechanism” such that it receives the closure only after the closure has been removed from the drink spout, meaning the closure is not engaged with the closure retention mechanism before it is selectively removed from the drink spout.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“3. “retain the closure in a stowed position” CamelBak contends that this limitation should be construed to mean “to hold or keep the closure in a position removed from the drink spout.” PO Resp. 13–14; PO Sur-Reply 4. Although Trove contends that CamelBak’s construction “impermissibly rewrites” the claim language, Trove nonetheless “does not disagree that it encompasses ‘hold or keep the Indeed, the claim language itself already contemplates just such a construction by expressly reciting that the closure retention mechanism “selectively retain[s] the closure in a stowed position relative to the handle when the closure is selectively removed from the drink spout.” Ex. 1001, 18:63–66 (emphasis added). As such, we determine that further construction of this limitation is not necessary to resolve the present dispute.” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Trove proposes that one of ordinary skill in the art would have had— an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products . . . [and that] [m]ore work experience may substitute for a lower level of education, and vice versa. Pet. 17–18 (citing Ex. 1003 ¶¶ 25–30). 2 US 9,272,822 B2, issued Mar. 1, 2016 (Ex. 1004, “Samartgis”). 3 EP 2 177 447 A1, published Apr. 21, 2010 (Ex. 1011, “Gorskey”). 4 US 2006/0006578 A1, published Jan. 12, 2006 (Ex. 1012, “Johnson”). 5 US 7,753,240 B2, issued July 13, 2010 (Ex. 1005, “Leoncavallo”). 6 US D586,184 S, issued Feb. 10, 2009 (Ex. 1006, “Miller”). A person having ordinary skill in the art would have had a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa. See PO Resp. 7 (citing Ex. 2009 ¶¶ 61–68). Because CamelBak simply paraphrases Trove’s slightly more detailed definition of the level of skill in the art, we adopt Trove’s definition, as it appears reasonable and consistent with the asserted prior art and the ’252 patent.” slip op. at 6
Patent outcomesUS 8,905,252 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,905,252 - CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentablePTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand
Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.
RulingsRemand decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable
“We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20
- Expert testimonyPetitioner expert discountedPatent owner expert creditedOther
“witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38
Patent outcomesUS 10,647,861 not shown unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,647,861 - Bowmar Archery LLC v. Matthew FuttereNo claims unpatentablePTAB · Jun 30, 2025 · IPR2024-00401 · APJ Sean P O’Hanlon · IPR · Final written decision
Claims 1–4, 7, 9, 11, 12, 15, and 17 were not shown unpatentable under any asserted anticipation or obviousness ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties do not identify, and we do not discern, any material difference between the parties’ proposed definitions. For purposes of this decision and based on the record before us, we adopt Petitioner’s proposed definition of the level of ordinary skill. Also, we note that we would reach the same conclusions under either proposed standard.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“1. Ferrule Petitioner argues that the ’177 patent “defines ‘ferrule’ as a ‘generally cylindrical body,’” which interpretation Petitioner asserts “is consistent with the ordinary meaning to [an ordinarily skilled artisan].” Pet. 19 (citing Ex. 1001, 2:53–55; Ex. 1019 ¶ 61). Patent Owner does not address Petitioner’s proposed interpretation of this claim term. See generally PO Resp. We adopt Petitioner’s uncontested interpretation of “ferrule.” 2. Blade Member Patent Owner argues that an ordinarily skilled artisan “would” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“As discussed in section II.C.2 above, we interpret a “blade member” to have a cutting surface. Petitioner does not support adequately its assertion that Lint’s barbs 19 have a cutting surface. Petitioner acknowledges that Lint discloses “barb 19,” but Petitioner merely labels the barbs as blade members in annotated versions of Lint Figure 2. Pet. 21–22, 24. Petitioner’s witness, Dr. Kuhn, provides substantially identical testimony, also failing to explain how Lint’s barbs have a cutting surface or perform a cutting function. See Ex. 1019 ¶¶ 68, 70. Such conclusory assertions fail to satisfy Petitioner’s burden of persuasion. To the contrary of Petitioner’s assertions, Lint discloses that its barbs do not perform a cutting function. Lint discloses that its barbs retract to the closed position upon impact with an animal. Ex. 1002, 2:62–67. Only when the arrowhead has “completely penetrated the flesh of an animal” does the spring urge the barbs into the extended position “to retain the arrowhead within the animal.” Id. at 2:67–70.6 Lint discloses that its barbs provide 6 During the hearing, Petitioner’s counsel argued that Lint’s disclosure of its barbs deploying “[a]fter the arrowhead 10 has completely penetrated the flesh of an animal” means the spring urges the barbs forward after the resistance to the removal of the arrow from an animal (id. at 1:53–57, 2:67–70), but Lint does not disclose its barbs as performing any cutting function. Thus, Lint’s barbs are not blade members with a cutting surface as we have interpreted the term above. Petitioner has failed to explain adequately how Lint discloses first and second blade members as recited in independent claims 1 and 11.” slip op. at 21
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“A claimed modification to the prior art may be an obvious design choice if the claimed structure performs the same function as in the prior art and it presents no novel or unexpected result over the prior art. See In re Kuhle, 526 F.2d 553, 555 (CCPA 1975) (finding that the use of the claimed feature “would be an obvious matter of design choice” when it “solves no stated problem” and “presents no novel or unexpected result” over the disclosed alternatives); Ex parte Maeda, Appeal No. 2010-009814, at 6–7 (PTAB Oct. 23, 2012) (informative) (“‘design choice’ may be appropriate where the applicant fails to set forth any reasons why the differences between the claimed invention and the prior art would result in a different function or give unexpected results” (citing In re Chu, 66 F.3d 292, 298–99 (Fed. Cir. 1995)). The ’177 patent explains that the purpose of the recited blade members is to maximize the cutting surface of the arrowhead through an animal’s soft flesh to increase the likelihood of a successful kill and minimize undue suffering of the animal. Ex. 1001, 1:26–30, 4:8–10, 4:21–24. The purpose of Lint’s barbs, on the other hand, is to resist removal of the arrow from an animal. Ex. 1002, 2:67–70. Indeed, Lint discloses that only when the arrowhead has “completely penetrated the flesh of an animal” does the spring urge the barbs into the extended position. Id. Thus, contrary to the conclusory assertions of Petitioner and Petitioner’s witness, Dr. Kuhn (see Pet. 49–51; Ex. 1019 ¶ 119), the recited blade members and Lint’s barbs perform vastly different functions. Neither Petitioner nor Dr. Kuhn explains adequately how the proposed modification to Lint’s barbs would be a mere matter of design choice. For at least the foregoing reasons, Petitioner’s first alternative” slip op. at 28
Patent outcomesUS 8,043,177 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,043,177 - Njoy, LLC / Njoy Holdings, Inc. v. Juul Labs, Inc.No claims unpatentablePTAB · Jun 10, 2025 · IPR2024-00231 · APJ Avelyn M Ross · IPR · Final written decision
Claims 14–16, 18, 27–29, 31, and 32 were not proven unpatentable because the asserted references failed to establish the claimed airflow path or a reason to make the proposed combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s and Patent Owner’s proposed levels of skill are similar and differ in that Petitioner’s relevant degrees and corresponding two years of experience additionally includes “industrial design” and “product design” and familiarity with “electrically powered vaporizing articles, their components or the underlying technologies” where Patent Owner requires two years of experience “designing electro-mechanical consumer products or an advanced degree.” Compare Pet. 7, with PO Resp. 2. Patent Owner alleges that “Petitioner has failed to establish unpatentability under either standard,” indicating that the level of skill in the art is not a dispositive issue. PO Resp. 3. In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’123 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’123 patent and the prior art. We note that the outcome of this Decision would be the same under Patent Owner’s proposed definition.” slip op. at 11
- Expert testimonyPetitioner expert creditedOther
“In this case, Mr. McAlexander meets both Petitioner’s and Patent Owner’s proposed level of skill in the art. As a result, we are persuaded Mr. McAlexander has the requisite skill and relevant expertise to offer testimony in this matter. For example, Mr. McAlexander has a Bachelor’s Degree in Electrical Engineering and far more than 2 years of experience in the electrical engineering field. Ex. 1027, 3–6, 7. In addition, Mr. McAlexander has provided expert consulting services in a wide range of technology areas involving the process and design of electro-mechanical consumer products. Ex. 1003 ¶ 5. Through one of Mr. McAlexander’s business ventures, his laboratory has “performed detailed airflow analyses, designing and constructing specialized apparatuses to emulate human breath, allowing for precise activation testing of ENDS devices.” Ex. 1043 ¶ 16. That said, a declarant’s expertise, even clothed as a skilled artisan, does not entitle a naked opinion persuasive weight. Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985). Here, Patent Owner had the opportunity to, and in fact did, thoroughly cross examine Mr. McAlexander about the purported deficiencies in his testimony. See, e.g., Exs. 2052, 2054; Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579, 595 (1993) (“Vigorous cross examination [and] presentation of contrary evidence . . . are the traditional and appropriate means of attacking shaky but admissible evidence.”). Therefore, to the extent Patent Owner credibly identifies deficiencies in Mr. McAlexander’s testimony or that testimony lacks factual support or is based on broad, conclusory assertions, we will assign appropriate weight. See Velander v. Garner, 348 F.3d 1359, 1371 (Fed. Cir. 2003) (explaining that it is within the Board’s discretion, as the trier of fact, to accord appropriate weight to the evidence presented).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends that the parties proposed a construction for “pressure valve,” a limitation appearing in claims 18 and 31, during the ITC investigation. Pet. 7 (citing Ex. 1001, 41:58–65). Patent Owner contends that the terms of the ’123 patent should be given their plain and ordinary meaning. PO Resp. 4. Because resolution of the issues presented in this case do not require construction of the term “pressure valve,” we do not expressly construe this claim term. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner. To anticipate a claim, a reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, 545 F.3d at 1369. “The requirement that the prior art elements themselves be arranged as in the claim means that the claims cannot be treated . . . as mere catalogs of separate parts, in disregard of the part-to-part relationships set forth in the claims.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Indeed, the prior art reference “must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference.” Net MoneyIN, 545 F.3d at 1371 (citation omitted). “[D]ifferences between the prior art reference and the claimed invention, however slight, invoke the question of obviousness, not anticipation.” Id.” slip op. at 20
Patent outcomesUS 10,130,123 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,130,123 - Intelligent Wellhead Systems, Inc. v. Downing Wellhead Equipment, LLCNo claims unpatentablePTAB · Jun 9, 2025 · IPR2024-00300 · APJ Frederick C Laney · IPR · Final written decision
Claims 1–38 were not shown unpatentable because Petitioner failed to establish Krupa as prior art and failed to show the claimed fluid-triggered valve sequence in Carr or Tolman.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Although we agree with Petitioner that the plain meaning of limitation 1.2 does not require the recited determination to occur at the first well, it does require the determination to be about the condition(s) of the fluid communicated to the first well by the manifold, regardless of where or how the information is gathered to make that determination. Limitation 1.2 recites plainly that the “determining” step is specifically about whether “the fluid communicated via the manifold has satisfied one or more conditions.” Ex. 1001, 22:38–39 (emphasis added). Considering the antecedents for “the fluid” and “the manifold”––i.e., “communicating fluid to a first well via a manifold” (id. at 22:35, limitation 1.1)––limitation 1.2 expressly identifies the fluid which “the manifold” has “communicated” to the first well to be exactly the fluid used for “determining” whether “one or more conditions” are “satisfied” to trigger the recited responses. Id. This is because “the fluid” refers to a fluid passing to a first well by way of a manifold and the past tense of “communicated via the manifold” indicates, more specifically, that it is the fluid passed by the manifold which must satisfy a condition(s). The Specification of ’770 patent illustrates this by checking the “frac rate” of the fluid discharged by a manifold to a first well to make the determination about whether to permit a regular swap or a continuous pumping swap (“CP swap”). Ex. 1001, 13:30–54, Fig. 12. Therefore, contrary to Petitioner’s representation that limitation 1.2 does not “requir[e] the fluid used for ‘determining’ to have been communicated to the first well” (Pet. Reply 3), the plain meaning of limitation 1.2 does require the fluid used” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“anticipated by, or would have been obvious over, Krupa necessarily requires Krupa to be first qualified as prior art. See Tech. Licensing Corp. v. Videotek, Inc., 545 F.3d 1316, 1327 (Fed. Cir. 2008) (party’s burden to prove anticipation of a patent includes initial burden of going forward with evidence that there is anticipating prior art). Under 35 U.S.C. § 102(a)(2)— the subsection under which Petitioner contends Krupa qualifies as prior art—when the reference patent document’s actual filing date is before the challenged patent’s filing date, a petitioner need only refer to the filing dates appearing on the challenged patent and reference patent document to make prima facie showing that the reference is prior art. 35 U.S.C. § 102(d)(1) (“For purposes of determining whether a patent or application for patent is prior art to a claimed invention under subsection (a)(2), such patent or application shall be considered to have been effectively filed, with respect to any subject matter described in the patent or application—(1) if paragraph (2) does not apply, as of the actual filing date of the patent or the application for patent.”).” slip op. at 16
- Strike new argumentNew argument disregardedDecided for patent owner
“We determine that the Petition did not adequately present Petitioner’s contention that Tolman discloses or suggests a “master valve” that a skilled artisan would understand to be the claimed “first valve,” which is first introduced in the Reply. The issue is whether Petitioner’s identification of Tolman’s “tree valve” for the claimed first valve was particular enough to allow Petitioner to rely specifically on the “master valve” in the well tree to show Tolman discloses the first valve. We find that it is not. It is undisputed that a well tree include several different valves: (1) valves for communicating fluid to a well (e.g., for treatment or stimulation); (2) valves for communicating fluid from a well (e.g., for flowback); and (3) valves for communicating fluid both to and from a well (e.g., master valve). See Reply 19–20; Ex. 1002 ¶¶ 542–545; Ex. 1044 ¶¶ 33–34, 38–42; Tr. 33:12–18, 34:3–12, 36:8–37:18, 39:4–17; Ex. 2013, 85:4–86:19, 87:1–12, 89:2–11. And the opening/closing of these different valves are controlled independently of the other valves based on different parameters. Id. identifying a tree valve, generally, does not provide the particularity necessary to provide notice that the master valve is the particular valve being relied upon. Further compounding this problem is the fact that the Petition repeatedly refers to a plurality of valves, rather than a singular “master valve.” The variability of possible valves suggested by simply referring to a tree valve fails to provide a level of particularity that clearly identifies which specific structure is being relied upon to perform which part of the recited procedure. Ultimately, we agree with Patent Owner that because the Petition does not specifically identify the master valve in the Petition, which the Petitioner’s Reply suggest was the intention all along, Patent Owner was put at a disadvantage because its ability to fully develop a response was impeded. Therefore, Petitioner’s reliance particularly on the “master valve” of the well tree, and the newly introduced evidence associated therewith, was improper and may not be considered. Nevertheless, as discussed below, even if Petitioner were allowed to rely on the master valve, we still find the Tolman Grounds to be deficient.” slip op. at 56
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“However, Carr does not disclose or suggest: relying on the condition(s) of the fluid communicated by first isolated manifold path 122 to first well 140 to be the determinative factor for causing first and second valves 470 and 472 to perform a sequenced response that includes–– (1) opening second valve 472, (2) communicating fluid to second well 142 through second valve 472, and (3) after opening second valve 472, closing first valve 150 from communicating fluid to first well 140. At the time of the invention, when a first well is being operated individually using high pressure pumping, we find that skilled artisans would have considered concurrent operation of the second well’s valves to be hazardous and activities that can not occur. See Ex. 1031, 4 (“specifically identified activities that were restricted from occurring at the same time (i.e., CAN NOT OCCUR activities). As an example, if the operations on a well involved high pressure pumping . . . then manipulating manifold well valves and wellhead trees valves on another well were not allowed to be performed concurrently”); Ex. 2012 ¶ 148. would have had a reasonable expectation of being able to successfully avoid the unacceptable hazards known to be associated with opening second valve 472 and communicating fluid to second well 142, while individually operating on first well 140 using high pressure pumping.10 Furthermore, Petitioner provides no persuasive evidence that a skilled artisan would have known that those unacceptable hazards could be avoided (or acceptably minimized) by using a condition(s) of the fluid communicated by first isolated manifold path 122 to first well 140 as a trigger for opening second valve 472 and communicating fluid to second well 142, while first well 140 is being individually operated.” slip op. at 34
Patent outcomesUS 11,560,770 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,560,770
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.