- Activision Blizzard, Inc. v. Milestone Entertainment, LLCNo claims unpatentablePTAB · Oct 14, 2026 · IPR2025-00708 · APJ Kevin W Cherry · IPR · Final written decision
Claims 1, 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 were not shown unpatentable over Kelly or Walker and Schneier.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art (“POSITA”). In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “[O]ne or more factors may predominate.” Id. Based on the testimony of Mr. Crevelt, we determine that a person of ordinary skill in the art would have had at least a bachelor’s degree in computer science or computer engineering, with at least three years of experience in game development. Pet. 14 (citing Ex. 1003 ¶¶ 62–65). Additional experience could substitute for less education, and additional education could likewise substitute for less experience. Id. We determine that the level of ordinary skill in the art adopted above is consistent with the level of technical understanding and competence reflected in the ’336 patent Specification and the asserted prior art references, based on our review of the record. Patent Owner states that “[f]or the purposes of this response, Patent Owner does not dispute Petitioners’ proposed level of skill, and under any level of skill a POSITA would not understand the asserted Grounds to raise any unpatentability issue,” and “this POR and supporting declarations apply Petitioner’s proposed level of skill.” PO Resp. 8. Thus, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’336 patent and the asserted prior art, and we apply it in our obviousness analysis below.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We determine that no terms require express construction to resolve the parties’ disputes in this case. See id. slip op. at 13
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“b) Walker Priority Date Under Dynamic Drinkware, the Petitioner is required to show that “the provisional application provides support for the claims of the patent or published application.” In re Riggs, 131 F.4th 1377, 1384 (Fed. Cir. 2025). Thus, Petitioner must show that (1) at least one claim of Walker is supported by its provisional (U.S. Provisional Application No. 60/378,289 (the “’289PROV”) and (2) the specific subject matter relied upon as prior art is supported by the ’289PROV. Id. Petitioner does provide a detailed explanation about how the ’289PROV supports claim 1 of Walker. See Reply 6–12. However, as Patent Owner argues, Petitioner fails to show that the ’298PROV provides support for the specific subject matter relied on in Walker. See Sur-Reply 3–8. Petitioner only explains how the ’298PROV discloses “predetermined criteria” but does not provide any other explanation for how the other subject matter relied on in Walker is supported by the ’298PROV. Thus, we find that Petitioner has failed to show that Walker is entitled a priority date before May 1, 2003. See Riggs, 131 F.3d at 1384 (noting while “a prior art patent or published application cannot be accorded the benefit of its provisional application’s filing date absent a showing that the provisional application provides support for the claims of the patent or published application,” the challenger must also show that “the specific portions of the patent specification identified and relied on” to demonstrate purported invalidity have written description support).” slip op. at 24
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We find that Petitioner has failed to show by a preponderance of the evidence that Kelly teaches limitation 1[f]. As Patent Owner persuasively argues, “the game play events” of limitation 1[f] refers to “game play events” in limitation 1[d], but Petitioner does not map “the game play events” identified in limitation 1[d] to limitation 1[f]. In its Reply, Petitioner does not dispute Patent Owner’s assertion, but merely reiterates its arguments from the Petition. See Reply 23–24, 26. However, none of these arguments or evidence demonstrates that the “game play events” in limitation 1[f] are same the “game play events” that are allegedly stored in limitation 1[d]. Even if we accept Petitioner’s contention that it was not identifying button presses, but rather includes “game states and game events in the game process,” Petitioner provides no evidence or even arguments that what it has identified here relates to what it has identified for limitation 1[f]. See Pet. 25–26 (citing Ex. 1005, 25:23–24, 32:27–33, 40:33–45, 56:49–51). For these reasons, Petitioner has failed to show by a preponderance of the evidence that Kelly teaches or suggests limitation 1[f]. Accordingly, we find that Petitioner has failed to show that claim 1 would have been obvious over Kelly. 2. Claims 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 Claims 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 all depend from claim 1. See PO Resp. 16 (explaining that the arguments for independent claim 1 also apply to the dependent claims inherent the deficiencies asserted with respect to the independent claims). We find Patent Owner’s arguments availing, as explained above. Accordingly, we find that Petitioner has failed to show by a preponderance of the evidence that claims 3–5, 12, 13, 18–20, 22, 24–26, 29, 42, 44–47, and 50 would have been obvious over Kelly.” slip op. at 40
Patent outcomesUS 8,529,336 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 8,529,336 - Ajinomoto Co., Inc. v. Abtis Co., Ltd.No claims unpatentablePTAB · Aug 3, 2026 · IPR2025-00283 · APJ Lilan Ren · IPR · Final written decision
The Board cancelled claim 11 and granted substitute claims 14–16, finding Petitioner had not shown those claims unpatentable on any asserted ground.
RulingsFinal written decision- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“must determine whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. In that regard, Patent Owner bears the burden of persuasion to show that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter;” slip op. at 9
- ExcludeMotion to exclude, deniedDenied
“In this case, Patent Owner’s expert “Dr. Zhou signed the second declaration, stood behind its contents, and was available for cross-examination.” Paper 35, 4. Petitioner does not dispute this statement. Paper 39, 1. Petitioner does not identify any specific undue prejudice caused by Exhibit 2008. For example, Petitioner argues that “the failure to impress upon a witness that a statement is under oath goes to the heart of its reliability as evidence” and that “as the Board has recognized, hearsay is inherently unreliable” without specifying what statement in Exhibit 2008 lacks reliability. Paper 39, 4. Because Petitioner does not provide specific evidence of undue prejudice, we find Petitioner has suffered no such undue prejudice in this case. See Liquidia, 2021 WL 4860773 at *25. We therefore deny Petitioner’s Motion to Exclude on the basis of lack of authenticity. With regard to the assertion that Exhibit 2008 is hearsay, Petitioner objects to the exhibit because the testimony is based “on other informal and unpublished documents that are hearsay under FRE 802.” Paper 29, 1. Petitioner does not specify what such “informal and unpublished documents” are. See id. Federal Rule of Evidence 703 expressly states, “[a]n expert may base an opinion on fact or data in the case that the expert has been made aware of or personally observed.” The facts or data “need not be deny Petitioner’s Motion to Exclude on the basis of hearsay.” slip op. at 50
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable
“Petitioner’s argument is unpersuasive. Paragraph 59 of the ’503 application describes formula 8-1 but does not support Petitioner’s argument that other unknown formulas may be included in the recited modified heavy chains. Ex. 2003 ¶ 59. Petitioner’s hypothesis that the recited heavy chains may (or may not) encompass unknown formulas is also inapposite to the written description inquiry before us — that is, whether the inventor was in possession of the subject matter recited in claims 14–16 based on the disclosure including formulas 8-1, 8-2, and 8-3. See PowerOasis, 522 F.3d at 1306.” slip op. at 14
- Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)EnabledNot shown unpatentable
“These arguments in the Sur-Reply are unpersuasive to show a lack of enablement first and foremost because the arguments do not specifically provide evidence showing that any purported experimentation is undue. See Sur-Reply 2–8 (asserting, but without providing evidence under any specific Wands factors, that the examples and guidance in the specification do not extend to the broad scope of all antibodies); see Wands, 858 F.2d at 737. We again emphasize that the analysis of undue experimentation does not necessarily require every Wands factor to be explicitly addressed but the analysis must be based on “weighing many factual considerations” depending on the nature of the invention and underlying art. Cephalon, Inc. v. Watson Pharms., Inc., 707 F.3d 1330, 1336 (Fed. Cir. 2013). The assertion that the claim scope is broad alone does not suffice to show a lack of enablement based on the record before us. Moreover, as we note supra, Petitioner’s claim scope argument is based on the false premise that the scope of claims 14–16 is as broad as the claim term “antibody” without taking into account all other claim elements. For example, Petitioner does not disagree with Patent Owner’s statement that “[t]he ’675 Patent’s specification discloses the structural modification site, the chemistry used to modify that residue, and working examples demonstrating the modification” (Reply 2), but asserts only that “[t]he disclosure of SSFI that only binds to IgG1 Fc domains (SEQ ID NO:1) is . . . . inconsistent with the expansive scope of the claims.” Sur-Reply 5. Petitioner’s argument that the claims encompass proteins that lack a lysine reside at a 248 position improperly excludes from the claim language the “lysine residue at 248 position . . . [as] determined by the EU numbering system” that claims 14–16 require. As Dr. Zhou testifies, “each proposed lysine residue at position 248 (EU numbering) is covalently modified with a specific attachment with a terminal bio-orthogonal click-chemistry functional group. The specification describes targeted transfer of a chemical functional group to lysine 248” and when claims 14–16 are considered in their entirety, which includes all claim elements, “[a] POSA would understand the claim itself to limit the modified antibodies to those with lysine at position 248.” Ex. 2004 ¶ 48; Ex. 2008 ¶ 47. We also note that Patent Owner states “a POSA would understand that the phrase ‘one or more modified heavy chain’ encompasses antibodies within typical DAR distributions (i.e., fractional numbers) rather than requiring a distinct process for producing antibodies bearing modified heavy chains in exact integers.” Reply 2–3. Moreover, Patent Owner states that PepTalk Presentation demonstrates that “a POSA would understand antibody conjugation products to exist as mixtures rather than discrete whole number species” because PepTalk Presentation “presents DAR values as non-integer measurements, i.e. DARs of 1.8 and 1.9 reflecting such distributions.” Id. at 3 (citing Ex. 1007, 28). According to Patent Owner, “preparations having an average DAR of approximately 1.8 (commonly referred to in practice as ‘DAR2’) may reflect typical reaction distributions in which some antibodies contain two modified heavy chains while others contain fewer.” Id. at 3 (citing Ex. 2008 ¶ 46). Petitioner does not rebut these statements. See Sur-Reply 2–8. Based on the foregoing, the evidence before us does not show any” slip op. at 27
Patent outcomesUS 11,896,675 not shown unpatentable§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 11,896,675 - Cambridge Industries USA, Inc. / Accelight Technologies, Inc. v. Applied Optoelectronics, Inc.No claims unpatentablePTAB · Jul 27, 2026 · IPR2025-00437 · APJ Monica S Ullagaddi · IPR · Final written decision
The majority held claims 1–19 not unpatentable: Wang did not establish anticipation of claims 1–10, and Wang with Xiong did not establish obviousness of claims 11–19.
RulingsFinal written decision- BurdenNot shown unpatentable
“Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“challenge set forth in the Petition by citing the background of the ’690 patent and Dr. Willner’s deposition testimony and characterizing the same as “admissions” of Patent Owner in Petitioner’s Reply, such “evidence” did not form the basis of Appellant’s original position set forth in the Petition.6 Petitioner’s arguments that all of the components recited in claim 11 “were known in the prior art” or that Dr. Willner admitted the same are unpersuasive at least because the Petition did not set forth this position. Contrary to Petitioner’s arguments during the oral hearing, the Petition does not present challenges based on “Applicant Admitted Prior Art.” See generally Pet.” slip op. at 23
- Skill levelSkill level petitioner adoptedDecided for petitioner
“field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
Patent outcomesUS 10,788,690 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,788,690 - Micron Technology, Inc. v. Yangtze Memory Technologies Co., Ltd.No claims unpatentablePTAB · Jul 21, 2026 · IPR2025-00190 · APJ Kimberly Mcgraw · IPR · Final written decision
Claims 1, 3–11, 13, and 14 were not shown unpatentable because Dong did not disclose the claimed vertical wordline arrangement, and the proposed 3D NAND combination lacked support for motivation and reasonable expectation of success.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“understanding that the claim term “from bottom to top” refers to the vertical arrangement of word lines in the memory portions from bottom to top and not from source end to drain end, as asserted by Petitioner. Inst. Dec. 17. In other words, the claim terms describing the first and second portions having word lines “from top to bottom” refer to the relative vertical location of the word lines within the memory portions and not to location of the word lines relative to the source or drain. Our construction is based on the plain and ordinary meaning of the express language of the independent claims, which states that the second memory portion is formed either above or below the first memory portion. The forming of one memory portion above or below another portion establishes a top and bottom in relation to those portions. For example, claim 5 is directed to a “program method of memory” that requires a second portion formed above the first portion. A second memory portion that is formed above a first memory portion is on top relative to the first portion. Similarly, claims 1 and 1 and 11, which recite a memory having a second portion formed below a first portion, establish that the second portion is on the bottom relative to the first portion. Thus, the claim language itself establishes the vertical locations of the memory portions relative to each other (e.g., a second memory portion that is above the first portion is on top, relative to the first portion). It follows that claim terms referring to the top and bottom of word lines within the memory portions also refer to relative vertical locations of the word lines within the memory portions. Thus, we understand the plain and ordinary meaning of claim” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner
“In our Decision, we treated the preambles of claims 5 and 11 as limiting, noting that these preambles provide antecedent basis for the word line limitations recited in the body of their respective claim. Dec. 14–15, 8. Neither party disputes that the preambles of claims 5 and 11 are limiting. See PO Resp. 34–35 (agreeing that the preambles are limiting); see generally Reply 1–6 (not disputing that the preambles are limiting). We maintain our construction of the preambles in this Decision.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“we consider the level of ordinary skill at the time of filing. 35 U.S.C. § 103; see also Graham, 383 U.S. at 17 (discussing pre-AIA obviousness). Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had a had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) NAND memory devices (including issues relating to the operation, e.g., programming, of said devices), or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience). Pet. 22 (citing Ex. 1004 ¶¶ 40–42). Petitioner also asserts that a POSITA would have been aware of and generally knowledgeable about NAND memory’s structure and fabrication, its component parts, how it operates, and how it is controlled. Id. at 22–23 (citing Ex. 1004 ¶ 41). In the Institution Decision, we adopted the assessment offered by Petitioner, which Patent Owner did not contest. Inst. Dec. 13. Following institution, Patent Owner stated it does not dispute Petitioner’s definition of a POSITA. PO Resp. 9 (citing Khatri Dec. ¶¶ 42–47). Because Petitioner’s definition of the level of skill in the art appears consistent with the ’941 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9
- Expert testimonyPatent owner expert creditedOther
“We disagree and find that Dong’s Figure 5a does not depict wordlines in a physical vertical orientation, but rather depicts voltage diagrams. We agree with Patent Owner’s argument, supported by persuasive testimony by Dr. Khatri, that a POSITA would have understood that Dong’s voltage charts (e.g., Fig. 5a) simply represent which voltages are applied to which word lines and do not depict the physical orientation of the wordlines. See, e.g., Ex. 2028 ¶ 171 (citing Ex. 1005 ¶ 20; Ex. 1009 ¶¶ 52–54). As Dr. Khatri explains, Dong Figures 5a–5h depict different examples of self-boosting modes showing voltages applied differently to the wordlines and are not intended to depict the physical orientation of these word lines. Ex. 2028 ¶ 171; see also Sur-reply 11–12 (citing Ex. 1005 ¶¶ 47, 65, 63–67; Ex. 2028 ¶¶ 177–186). We agree with Dr. Kahtri’s persuasive testimony that a POSITA would understand that Figures 5a–5h are illustrated vertically, but do not represent the actual physical arrangement of the word lines in memory, which are shown to be horizontal in Dong’s Figure 4. See, e.g., Ex. 2028 ¶ 172 (citing Ex. 1005 ¶¶ 20, 45, 47, 87).” slip op. at 24
Patent outcomesUS 11,568,941 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,568,941 - Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentablePTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17
- Expert testimonyPetitioner expert discountedDecided for patent owner
“that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21
Patent outcomesUS 8,686,562 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,686,562 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Bio-Rad Laboratories, Inc. v. California Institute Of TechnologyNo claims unpatentablePTAB · Mar 23, 2026 · IPR2024-01451 · APJ Tawen Chang · IPR · Final written decision
Claims 1–19 were not shown unpatentable: Larson did not establish the claimed detection in a single sample volume, and the asserted obviousness combinations did not cure the deficiencies.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner states that, “[f]or purposes of this IPR proceeding, PO does not contest Petitioner’s description of qualifications for a person of ordinary skill in the art (POSA) set forth [above].” PO Resp. 23. In view of the above, and because Petitioner’s uncontested description of one of ordinary skill in the art is reasonable and consistent with the ’921 patent and the cited art, we adopt Petitioner’s definition of a POSA for purposes of this Decision, except that we replace the phrase “at least a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection” with “around a year of experience in quantitative and/or dPCR and fluorescence-based analyte detection.” Pet. 9 (emphasis added).13” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We begin with “the context in which a term is used in the asserted claim,” which can be “highly instructive.” Phillips, 415 F.3d at 1314. In this case, claim 1 recites that the claimed assay is “capable of unambiguously detecting the presence or absence of each of said at least M analytes, in any combination of presence or absence, in a single sample volume, . . . wherein the analytes are amplified in the single sample 15 In this regard, we note that Petitioner’s claim construction position is not predicated on the collection of droplets being reconstituted into its original, pre-partition form prior to amplification; rather, the droplets remain compartmentalized from each other in the PCR thermal cycling tube. Tr. 65:21–66:9 (Petitioner’s counsel explaining that the droplets do not combine in the PCR thermal cycling tube but, rather, are “suspended in an immiscible fluid and analyzed en masse”). indicates that the first instance of single sample volume, i.e., the single sample volume in which the presence or absence of each M analytes are to be detected, is the antecedent basis for the second instance of “single sample volume,” i.e., the single sample volume in which the analytes are amplified. Thus, as the parties appear to agree, the single sample volume in which amplification takes places must be the same single sample volume in which the presence or absence of analytes are to be detected. We are not persuaded that, when accorded its plain and ordinary meaning, a single sample volume divided into a collection of droplets would be considered the “same” single sample volume prior to its partition.” slip op. at 17
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“With respect to the limitation, “wherein the analytes are amplified in the single sample volume,” Petitioner asserts that “Larson discloses PCR assays that amplify target polynucleotide in a single sample volume, specifically a portion of the reaction mixture that is subsequently partitioned into droplets.” Pet. 31 (emphasis added). There is no dispute that the amplification of the analytes in Larson occurs in the droplets. Larson ¶¶ 6–7 (explaining that “[d]igital PCR (dPCR) is an alternative quantitation method in which dilute sample are divided into many separate reactions” and that “[t]he template is amplified in the droplet for detection”) (emphasis added). Because the claims require that amplification of the analytes be in the same sample volume in which the at least M analytes, in any combination of presence or absence, is unambiguously detected, and because the pre-partition single sample volume is not the same single sample volume as the collection of droplets after partition under our claim construction set forth above, we find Petitioner has not shown, by a preponderance of evidence, that claims 1–10 and 13–19 are anticipated by Larson.17 Tr. 68:12–69:14 (Petitioner’s counsel” slip op. at 27
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Although we agree with Petitioner that Larson contemplates scenarios in which droplets may contain more than one target molecule and does not require the exclusion of such multiple occupancy droplets in all embodiments, we are nevertheless not persuaded Petitioner has shown, based on a preponderance of evidence, that Larson renders obvious an assay capable of unambiguously detecting, in such multiple occupancy droplets, the presence or absence of each of at least M analytes, in any combination of presence or absence, when M is greater than F and F is at least 2.” slip op. at 32
Patent outcomesUS 11,827,921 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,827,921 - Early Warning Services, LLC v. Intellectual Ventures II LLCNo claims unpatentablePTAB · Feb 11, 2026 · IPR2024-01221 · APJ Iftikhar Ahmed · IPR · Final written decision
Petitioner failed to prove claims 1, 2, 4, 5, 7, 8, 12, 13, 17, 19–21, 23, 24, 26, 27, 29, 30, 34, 39–41, and 43 unpatentable because the cited grounds did not establish the required …
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“image capture device” refers to an imaging-based barcode reader and not a laser-based barcode scanner because we are persuaded that claim language and Specification support that interpretation and also because Patent Owner persuasively shows that a person of ordinary skill in the art would have understood the term as such. Claim 1 recites an “image capture device configured to capture an image.” Ex. 1001, 16:24–25. The plain meaning of the claim term requires that the image be captured, not just scanned. The claim further requires “generating an output based on the information embedded in the image,” requiring that information is retrieved from the captured image. Id. at 16:32–33. A device that does not capture an image is not an “image capture device” under the plain language of the claim. A laser-based barcode scanner employs light reflected from a laser beam to “generate an electrical signal that corresponds to the bars and spaces in the barcode being scanned.” See Ex. 2029 ¶¶ 42–43 (explaining in detail how laser-based barcode self-emitting a laser light across a code to be scanned, with a sensor tuned to capture the reflected light from the laser.”). It simply does not capture an image. slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Based on our review of the complete record, we determine that Petitioner’s stated level of ordinary skill in the art is reasonable because it is consistent with the evidence of record, including the asserted prior art. The field of the ’167 patent “relates generally to secure transactions, and more specifically, to methods and devices for providing secure identification, verification, and authorization using a portable secure device.” Ex. 1001, 1:8–11. The ’167 patent seeks “to provide methods and devices that are capable of providing secure transactions in a more efficient manner.” Id. at 3:11–13. Accordingly, we adopt Petitioner’s definition. We note, however, that our patentability analysis would be the same under Patent Owner’s definition.” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner that Wang fails to disclose limitation 1[a]. Wang discloses a portable electronic authorization device (PEAD) that can be used as a self-checkout terminal. Ex. 1004 ¶ 115. In this context, Wang discloses By entering the UPC code or barcode using keypad on the PEAD or scanning in the UPC code or barcode using the input device built into the PEAD such as a barcode scanner or OCR reader, the PEAD can generate the receipt with the list of item prices through the wireless network and Internet by querying the item price using the barcode as the index for price lookup table which is Stored in a Server System. Id. (emphasis added). As discussed above (Section III.C.1), we are persuaded by Patent Owner’s arguments that the claimed “image capture device” refers to an imaging-based device and not a laser-based barcode scanner. Petitioner does not contend that Wang’s disclosure of the barcode scanner necessarily refers to an imaging-based device, but argues that Wang’s disclosure is sufficient because “both imaging-based barcode scanners and laser-based barcode scanners constitute image capture devices.” Reply 11. In light of our claim construction above, we disagree.” slip op. at 27
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Petitioner contends that claims 1, 4, 5, 7, 12, 17, 23, 26, 27, 29, 34, and 43 are unpatentable as obvious over the combination of Wang and Drummond. Pet. 30–43. 1. Drummond Drummond is a patent titled “Automated Banking Machine System and Method,” and “relates to an automated banking machine apparatus and system that are capable of use in a wide area network, and which provides a user with a remote electronic receipt or other record related to a transaction performed at the machine.” Ex. 1008, code (54), ¶ 2. Drummond discloses that its automated banking machine, may “initiate the sending of a non-paper transaction receipt to the customer,” “[t]he receipt may be sent using a wide area network, such as the Internet,” and “[t]he receipt may be an electronic receipt, for example a receipt in the form of an e-mail message.” Id. ¶ 247. 2. Claims 1, 4, 5, 7, 12, 17, 23, 26, 27, 29, 34, and 43 For this obviousness ground, Petitioner relies on the same arguments and evidence as its Ground 1a (anticipation by Wang), discussed above, for the majority of claim limitations. See Pet. 33–43. Importantly, Petitioner relies solely on Wang as teaching independent claim limitations [1a], [23a], and [43b] relating to an image capture device and embedded information. Pet. 36, 41, 43. Accordingly, for the reasons discussed above with respect to Ground 1a, Petitioner has not established by a preponderance of the evidence, that the subject matter of claims 1, 4, 5, 7, 12, 17, 23, 26, 27, 29, 34, and 43 would have been obvious to one of ordinary skill in the art over the combination of Wang and Drummond.” slip op. at 31
Patent outcomesUS 7,314,167 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,314,167 - Trove Brands, LLC v. Camelbak Products, LLCNo claims unpatentablePTAB · Oct 28, 2025 · IPR2024-00858 · APJ Carl M Defranco · IPR · Final written decision
Claims 5–7 and 16–19 were not shown unpatentable under § 102 or § 103 because the cited references failed to disclose the claimed closure retention mechanism.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesPrior construction adoptedDecided for petitioner
“1. “closure retention mechanism” Trove proposes that “closure retention mechanism” should be construed as a means-plus-function term under 35 U.S.C. § 112(f). See Pet. 18–19; Pet. Reply 1. CamelBak agrees. See PO Resp. 8. Indeed, subsequent to our institution decision, the district court in the parallel action held that the “closure retention mechanism” is a means-plus-function term governed by 35 U.S.C. § 112(f). See Ex. 2010, at 5–6. We see no reason to depart from that holding and adopt the district court’s reasoning in that regard as our own. See id. at 6–8.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We agree with CamelBak that the plain language of the claim imposes a temporal condition on when the closure is received by the closure retention mechanism, namely, only after it is removed from the drink spout. In other words, the closure cannot be in engagement with, i.e., “received by,” the closure retention mechanism while it remains on the drink spout. This interpretation is consistent with the specification, which repeatedly states that spaced-apart tabs 56 “engage” the closure when it is removed from the spout and moved to the stowed position. Ex. 1001, 8:58–60 (“tabs 56 . . . are configured to selectively engage and retain, or otherwise grip, the closure in the stowed position”); 9:32–39 (“when the closure is positioned between and/or otherwise in engagement with the tabs, the tabs engage the closure across the maximum width, such as with the tabs resiliently deflecting, bending, or compressing to accommodate the greater width of the closure”); 11:36–39 (“the closure retention mechanism 54 may be configured to engage . . . the closure to operatively retain the closure in its stowed configuration.”); 13:26–31 (“When the closure is operatively positioned within the closed perimeter of the handle into its stowed position . . . such closure is compressed slightly.”) (emphases added). Moreover, the specification describes this engagement as occurring by means of a “friction-fit” or “snap-fit” arrangement (id. at 8:50–52, 14:33– 36), which confirms that the closure is not permanently engaged with the tabs, but rather moved into engagement with the tabs, i.e., “received by the closure retention mechanism” per the plain language of the claim. Thus, the intrinsic evidence—the claim language and the specification—supports a construction that imposes a temporal condition on the recited function of the claimed “closure retention mechanism” such that it receives the closure only after the closure has been removed from the drink spout, meaning the closure is not engaged with the closure retention mechanism before it is selectively removed from the drink spout.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“3. “retain the closure in a stowed position” CamelBak contends that this limitation should be construed to mean “to hold or keep the closure in a position removed from the drink spout.” PO Resp. 13–14; PO Sur-Reply 4. Although Trove contends that CamelBak’s construction “impermissibly rewrites” the claim language, Trove nonetheless “does not disagree that it encompasses ‘hold or keep the Indeed, the claim language itself already contemplates just such a construction by expressly reciting that the closure retention mechanism “selectively retain[s] the closure in a stowed position relative to the handle when the closure is selectively removed from the drink spout.” Ex. 1001, 18:63–66 (emphasis added). As such, we determine that further construction of this limitation is not necessary to resolve the present dispute.” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Trove proposes that one of ordinary skill in the art would have had— an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products . . . [and that] [m]ore work experience may substitute for a lower level of education, and vice versa. Pet. 17–18 (citing Ex. 1003 ¶¶ 25–30). 2 US 9,272,822 B2, issued Mar. 1, 2016 (Ex. 1004, “Samartgis”). 3 EP 2 177 447 A1, published Apr. 21, 2010 (Ex. 1011, “Gorskey”). 4 US 2006/0006578 A1, published Jan. 12, 2006 (Ex. 1012, “Johnson”). 5 US 7,753,240 B2, issued July 13, 2010 (Ex. 1005, “Leoncavallo”). 6 US D586,184 S, issued Feb. 10, 2009 (Ex. 1006, “Miller”). A person having ordinary skill in the art would have had a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa. See PO Resp. 7 (citing Ex. 2009 ¶¶ 61–68). Because CamelBak simply paraphrases Trove’s slightly more detailed definition of the level of skill in the art, we adopt Trove’s definition, as it appears reasonable and consistent with the asserted prior art and the ’252 patent.” slip op. at 6
Patent outcomesUS 8,905,252 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,905,252 - Cradlepoint, Inc. / Honeywell International, Inc. et al. v. Sisvel S.P.A.No claims unpatentablePTAB · Sep 29, 2025 · IPR2021-00580 · APJ Monica S Ullagaddi · IPR · Remand
On remand, the Board held claims 1–10 not shown unpatentable under the Sachs anticipation and obviousness grounds because Sachs did not disclose the required timer stopping, and the new theories were not considered.
RulingsRemand decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Whether Mr. Bates is a Person of Ordinary Skill in the Art In the Final Written Decision, we adopted Petitioner’s definition because “there does not appear to be a dispute that needs to be resolved.” FWD 8. Here, where Mr. Bates’ qualifications are challenged, we have reviewed the complete record including the parties’ arguments on remand and we find that Mr. Bates does not meet the requirements for a person of ordinary skill in the art according to Petitioner’s definition for level of ordinary skill in the art, which we adopted (see FWD 8). Notably, the panel adopted Petitioner’s definition of the level of ordinary skill in the Institution Decision (Paper 16, 8), and neither party challenged that determination during the trial, although Patent Owner did offer its own definition (PO Resp. 9). Mr. Bates has one degree: “a bachelor’s degree in Business Management.” Ex. 2001 ¶ 7. A degree in Business Management is not “a degree in electrical engineering or a similar discipline.” Pet. 35 (emphasis added). Accordingly, we disregard the testimony of Mr. Bates in rendering our findings and conclusions in this Decision. We note that, even if we did consider Mr. Bates’s testimony, the findings and conclusions rendered in this Decision would not change.” slip op. at 12
- Expert testimonyPatent owner expert discountedDecided for petitioner
“cover for his lack of education.” Pet. Remand Br. 4. Patent Owner disagrees and argues, inter alia, that “Mr. Bates was a pioneer in the cellular telecommunications field with more than five decades of practical and teaching experience.” PO Remand Resp. 5 (citing Ex. 2001 ¶¶ 8–23) (emphasis omitted); see id. at 3–4, 6. Whether Mr. Bates is a Person of Ordinary Skill in the Art In the Final Written Decision, we adopted Petitioner’s definition because “there does not appear to be a dispute that needs to be resolved.” FWD 8. Here, where Mr. Bates’ qualifications are challenged, we have reviewed the complete record including the parties’ arguments on remand and we find that Mr. Bates does not meet the requirements for a person of ordinary skill in the art according to Petitioner’s definition for level of ordinary skill in the art, which we adopted (see FWD 8). Notably, the panel adopted Petitioner’s definition of the level of ordinary skill in the Institution Decision (Paper 16, 8), and neither party challenged that determination during the trial, although Patent Owner did offer its own definition (PO Resp. 9). Mr. Bates has one degree: “a bachelor’s degree in Business Management.” Ex. 2001 ¶ 7. A degree in Business Management is not “a degree in electrical engineering or a similar discipline.” Pet. 35 (emphasis added). Accordingly, we disregard the testimony of Mr. Bates in rendering our findings and conclusions in this Decision. We note that, even if we did consider Mr. Bates’s testimony, the findings and conclusions rendered in this Decision would not change.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“C. Claim Construction The Federal Circuit determined that “the plain and unambiguous language of claim 1 requires that a method, to come within the claim, must perform both limitations 1[c] and 1[d] where their preconditions apply.” Sierra Wireless, 130 F.4th at 1022. We interpret the claims and analyze Petitioner’s unpatentability arguments under the Federal Circuit’s determination.” slip op. at 13
- Strike new argumentNew argument disregardedDecided for patent owner
“Petitioner was on notice, when Patent Owner’s Response was filed at the latest, that claim 1 could be construed as unconditionally requiring both limitations 1[c] and 1[d]. Indeed, Petitioner contended that it had shown both limitations “in single references.” Pet. Reply 5. Petitioner now seeks to shift its unpatentability contentions for limitation 1[c] from Figure 5 of Sachs to Figures 6 and 7. Petitioner’s new reliance on Figures 6 and 7 of Sachs is “a meaningfully distinct contention” from its position in both the Petition and the Reply. See Ariosa Diagnostics v. Verinata Health, Inc., 805 F.3d 1359, 1367 (Fed. Cir. 2015). We therefore find that Petitioner impermissibly presents new theories of unpatentability on remand. 3. Independent Claim 1 We decline to address Petitioner’s new theories of unpatentability proposed on remand concerning Sachs’s Figure 7. See Pet. Remand Br. 15– 20. Although Petitioner cites pages 59–61 of the Petition as discussing Figure 7 of Sachs (see Pet. Remand Br. 15), the cited discussion concerns dependent claims 5 and 10, not independent claims 1 and 8.” slip op. at 17
Patent outcomesUS 7,869,396 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,869,396
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.