- Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - PTAB · Feb 27, 2025 · IPR2024-01227 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on all grounds for claims 1–5 and 8–13, finding a reasonable likelihood that claim 8 is anticipated by Fukui and claims 1 and 8 are obvious over Fukui-based grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“Patent Owner contends that we should deny institution under 35 U.S.C. § 325(d) “because the Petition presents ‘the same or substantially the same prior art or arguments previously . . . presented to the Office.’” Prelim. Resp. 25–31 (alteration in original). Specifically, Patent Owner explains, the Office previously considered Sedor during the ’542 patent’s prosecution, and Sauter was made of record but not considered during prosecution. Id. Patent Owner, however, states that it “recognizes that this argument only reaches Sauter-based grounds, not Fukui-based grounds. This argument thus only needs to be addressed after the Board confirms the fundamental deficiencies in Petitioner’s Fukui-based grounds.” Id. at 25 n.3. Because, as set forth below, we do not, on the present record, find any “fundamental deficiencies in Petitioner’s Fukui-based grounds” that inhibit institution of trial, we regard Patent Owner’s § 325 request as moot, and we need not consider it further.” slip op. at 10
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have [had] a B.S. degree or equivalent in mechanical or electrical engineering or similar fields, in addition to a minimum of two years of professional experience with or graduate studies involving design, development, and/or utilization of optical communication systems.” Pet. 26. On the present record, Patent Owner does not dispute this proposed level of skill. Prelim. Resp. 1–31. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’542 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“enough to resolve . . . the lead Fukui ground” but that “[t]here are two disputes relevant to the alternative Sauter ground.” Pet. 22. With respect to the first of these “disputes,” Petitioner presents two claim constructions for the claim term or phrase “cassette width as measured between outer side edges thereof of one of one, two, three, four and six standard width units.” Id. at 23. The constructions are said to be from “the co-pending litigation,” with one characterized as “Patent Owner’s proposed construction”6 and the other as “CommScope’s proposed construction.”7 Of note is Petitioner’s 6 The claim construction attributed to Patent Owner is: “cassette width as measured between the outer side edges thereof that accommodates one of one, two, three, four, or six receptable modules.” Pet. 23. 7 Petitioner’s construction is: “The cassette width as measured between the outer side edges thereof equals one, two, three, four, or six times the contention that “[Patent Owner]’s construction cannot be correct,” and accompanying explanation in that respect. Id. at 22–23, 24. Patent Owner acknowledges that there is a dispute between the parties as to the noted claim construction but urges that “[t]he Board, however, need not fully resolve this claim construction dispute,” as, in Patent Owner’s view, the grounds based on Sauter are deficient based on either construction. Prelim. Resp. 21–22. We are mindful of Petitioner’s view that Patent Owner’s litigation construction is not correct. We also question whether that construction adds clarity in substituting “width that accommodates” for “width of,” and replacing “standard width units” with “receptable modules,” without, on this record, support for such word variations. Nevertheless, our determination whether to institute trial does not require resolution of any claim construction dispute, nor does it necessitate that we adopt any particular construction for the pertinent claim term. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). We invite the parties to develop the record more fully on this claim- construction issue during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,435,542 - Foursquare Labs, Inc. v. Boardactive CorporationAll claims unpatentablePTAB · Nov 27, 2024 · IPR2023-00918 · APJ Robert J Silverman · IPR · Final written decision
Claims 1–29 are unpatentable: claims 1–27 under the Adharapurapu (Alcatel) and Kerr obviousness ground, and claims 28–29 under the Adharapurapu (Alcatel) anticipation ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Our Institution Decision addressed the matter of the appropriate level of ordinary skill, in view of the Petition and the Preliminary Response, as follows: The parties’ descriptions of the level of ordinary skill at the time of the invention do not appear to differ in any material way that would affect this Decision. However, at this stage of the proceeding, it is unclear whether it would be proper to require Patent Owner’s proposed requirement of “three years of experience working with digital advertising and geofencing.” Prelim. Resp. 10–11. Accordingly, for the purposes of this [Institution] Decision, we adopt Petitioner’s description of the relevant level of skill in the art, because it appears to be consistent with the level of skill reflected in the ’620 patent and asserted prior art. Inst. Dec. 16. Patent Owner’s Response endorses the determination presented in the Institution Decision. PO Resp. 2. Petitioner does not address our initial determination in its Reply. See generally Pet. Reply. Accordingly, consistent with our Institution Decision, in this Final Written Decision, we employ Petitioner’s description of the relevant level of skill in the art. C. Claim Interpretation” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“The Specification of the ’620 patent supports the understanding that a “consumer” is “a user or person,” per Patent Owner’s proposal (PO Resp. 11). See Ex. 1001, 8:36–38 (“The AdDrop™ may require the consumer to be one of the first few people to input an answer to a question to win the promotion.”) However, Patent Owner’s further proposed requirement — i.e., that a “consumer” be someone “to whom an advertisement may be sent” — would cloud, rather than clarify, the term’s meaning. PO Resp. 11 (emphasis added). For instance, under Patent Owner’s construction, it is not clear if “consumers” require access to the cellular network or Internet in order to be sent advertisements. Further, Patent Owner’s proposed construction would not assist in resolving any issue in this proceeding, contrary to our ambition to construe claim terms “only to the extent necessary to resolve the controversy.” Vivid Techs., 200 F.3d at 803. Moreover, the role of the term “consumer,” in the ’620 patent’s claims, is based upon the relationship of the “consumer” to particular actions and instrumentalities, e.g., associated “media content,” “profile data,” or a “device.” See, e.g., Ex. 1001, 37:57, 66–67, 38:15. In view of the foregoing, we do not adopt Patent Owner’s proposed construction that requires a “consumer” to be a person “to whom an advertisement may be sent.” See PO Resp. 11 (emphasis added). D. Prior Art References” slip op. at 15
- Strike new argumentNew argument disregardedDecided for petitioner
“As an initial matter, such a new argument that is introduced in a Sur- reply is improper. See 37 C.F.R. § 42.23(b) (“A sur-reply may only respond to arguments raised in the corresponding reply.”); Consolidated Trial Practice Guide10 74 (Nov. 2019) (“While replies and sur-replies can help crystalize issues for decision, a reply or sur-reply that raises a new issue or belatedly presents evidence may not be considered. The Board is not required to attempt to sort proper from improper portions of the reply or surreply.”); Hulu, LLC v. SITO Mobile R&D IP, LLC, IPR2021-00158, Paper 34 at 55 (PTAB Apr. 15, 2022). In addition, Patent Owner’s new “geolocation” argument is founded on attorney argument, without adequate support in record evidence, and is contradicted by the unchallenged testimony of Dr. Goldberg. See Ex. 2002 ¶¶ 29–66 (discussing terrestrial location technologies), 175–195 (discussing the disclosure of “geolocation” features in the Adharapurapu (Alcatel) reference).” slip op. at 22
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Yet, Patent Owner does not address Petitioner’s stated reasons (quoted above) for combining teachings of Adharapurapu (Alcatel) and Kerr, regarding the “registering asset data” features of limitation 1(a) (including its subparts) — reasons that are supported by the unchallenged testimony of Dr. Goldberg. See Pet. 50–51 (citing Ex. 1002 ¶¶ 196–197). Still further, Patent Owner does not address Petitioner’s other reasons for combining teachings of Adharapurapu (Alcatel) and Kerr, concerning the recited “content interaction layer” and “consumer tracking layer” features of limitation 1(b) (including its subparts): , POSITA would have found it obvious to incorporate Kerr’s user content interaction features into Alcatel to provide user subjective information/feedback for improving the accuracy, reducing noise, and enhancing efficiency in tailored communications. Pet. 43–44. Petitioner’s discussion of these reasons for combining the references’ teachings is supported by additional unrebutted testimony of Dr. Goldberg. Ex. 1002 ¶ 180. Having considered the parties’ arguments and the evidence of record (including the unchallenged testimony of Dr. Goldberg), we determine that Petitioner has sufficiently shown that the combination of Adharapurapu (Alcatel) and Kerr teach or suggest limitation 1(a) (including all subparts).” slip op. at 23
Patent outcomesUS 10,621,620 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,621,620 - Foursquare Labs, Inc. v. Boardactive CorporationAll claims unpatentablePTAB · Nov 27, 2024 · IPR2023-00919 · APJ Michael L Woods · IPR · Final written decision
Claims 1–23 are unpatentable: claims 13–19 were anticipated by Felt, and claims 1–23 would have been obvious over Adharapurapu and Felt.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“Accordingly, we deny Petitioner’s motion to exclude in its entirety. IV. PATENT OWNER’s MOTION TO EXCLUDE Patent Owner moves to exclude Exhibits 1002 and 1009—the” slip op. at 84
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, the Petition fails to establish that Felt satisfies” slip op. at 34
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableUnpatentable
“uncontroverted testimony of Dr. Goldberg, and the reasoning to combine the references, Petitioner has shown by a preponderance of the evidence that claims 1–23 would have been obvious over the combination of Adharapurapu and Felt (Ground 6). Petitioner has also shown, by a preponderance of the evidence, that Felt anticipates claims 13–19 (Ground 1), renders obvious claims 13–19 (Ground 2), and that claims 1–19 would have been obvious over Felt in view of Creemer or Scofield (Ground 4).” slip op. at 86
Patent outcomesUS 10,692,108 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,692,108 - Elmos Semiconductor SE v. Texas Instruments IncorporatedInstitution deniedPTAB · Nov 5, 2024 · IPR2024-00802 · APJ Bach V Hoang · IPR · Institution
The Board denied institution because Petitioner failed to show a reasonable likelihood that any of claims 1–20 would be unpatentable on any asserted obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having reviewed the parties’ papers and the evidence of record, we determine that Petitioner has not shown a reasonable likelihood it would prevail in establishing the unpatentability of any of the challenged claims. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that “a person having ordinary skill in the art (‘POSITA’) at the relevant time, would have had at least a bachelor’s degree in electrical engineering, or equivalent experience of at least two years working in the field of the design electrical driver systems for Light Emitting Diodes (LEDs).” Pet. 20. Patent Owner has not addressed the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as articulated above. We determine this level of skill comports with the qualifications a person would have needed to understand and implement the teachings of the ʼ432 Patent and the prior art of record. Cf. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (noting that the prior art itself may reflect an appropriate level of skill in the art). We note, however, that the open-ended language “at least” expands the range of education and experience indefinitely with no upper bound. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Based on the record before us, we do not find it necessary to expressly construe any claim terms or phrases to reach our decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (per curiam) (claim terms need to be construed “only to the extent necessary to resolve the controversy” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Petitioner’s constructions do not affect our determinations, and, even under Petitioner’s constructions, Petitioner fails to show a reasonable likelihood of success with respect to its proposed grounds of unpatentability for the challenged claims of the ’432 Patent.” slip op. at 10
- BurdenNot shown unpatentable
“First, even under Petitioner’s assertion that “controller RG . . . performs the functions of an error amplifier and amplifier output stage” (id. at 37), Petitioner has not adequately shown that controller RG meets all three of “an error amplifier,” “a control voltage,” and “an amplifier output stage.” Petitioner’s assertions that those elements are “interior to” or “include[d]” in controller RG are conclusory and unsupported. Petitioner summarizes and reproduces portions of Sudhaus regarding the output currents of controller RG, but has not explained the relevance of its summary and reproduction with respect to each recited claim element. See id. at 37–38 (citing Ex. 1005, 2:32–33, 4:25–28, 4:46–50, 8:47–55), 40– 41. Nor has Petitioner explained why or how the summarized or reproduced portions of Sudhaus show that those claim elements are interior or included in controller RG. See id. Further, Petitioner also fails to show how Sudhaus teaches the claimed interactions and relations between the error amplifier, control voltage, and amplifier output stage. The claim recites the error amplifier compares voltages to “generate a control voltage” and the amplifier output stage controls output current “based on the control voltage.” Petitioner has not explained what specific signal controller RG generates that teaches a “control voltage” used to control output current. Nor has Petitioner stated, let alone explained how, controller RG generates a control voltage in the claimed manner and controls output current based on that control voltage. Simply because controller RG produces outputs that are allegedly similar to the claimed outputs does not by itself show that controller RG produces the claimed outputs using the claimed elements in the claimed manner.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 11,653,432 - Masimo Corporation v. Apple Inc.No claims unpatentablePTAB · Oct 15, 2024 · IPR2023-00745 · APJ Robert L Kinder · IPR · Final written decision
Claims 1–4 and 8–22 were not shown unpatentable because Mills did not disclose the required embedded structure and Markel combined with Mills did not teach it; the revised motion to amend was dismissed as moot.
RulingsFinal written decision- PTAB / AIA Trials › Motions to amend / substitute claimsNot reached
“Patent Owner’s Revised Contingent Motion to Amend asserts that in “the event the Board finds at least one challenged [Revised Motion to Amend] claim unpatentable, [Patent Owner] respectfully requests that the Board grant this Motion with respect to the corresponding proposed substitute claim(s).” Paper 27, 1. Because we determine that Petitioner has not established that any of the challenged claims 1–4 and 8–22 are unpatentable, Patent Owner’s Revised Contingent Motion to Amend is moot.” slip op. at 61
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner’s proposed level of ordinary skill in the art is somewhat broader in both education and proposed work experience. Patent Owner’s proposed work experience is somewhat vague and potentially outside the scope of the claimed invention. For example, the requirement that the person of ordinary skill in the art have experience with the “capture and processing of data or information, including but not limited to physiological information,” would seemingly encompass data processing areas that do not relate to the scope of the claimed invention. We adopt Petitioner’s level of the level of ordinary skill in art because it is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). Our analysis and the end result are the same under either proposed definition.” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“structure where a lead is embedded in a portion of the enclosure from other embodiments where a lead is merely positioned against or in parallel contact with a portion of the enclosure. See Ex. 2003 ¶¶ 36–37. The Specification describes distinct embodiments such as “lead 472 of the heart sensor can be positioned against the back surface of bezel 460,” or “[a]lternatively, lead 472 can be placed within the thickness of bezel 460 (e.g., in a pocket within the bezel wall), but underneath the outer surface of the bezel.” Ex. 9:44–48. We agree with Patent Owner, and Dr. Kenny, that “[t]his passage distinguishes a lead that is embedded in a portion of the enclosure from a lead that is merely ‘positioned against’ or in parallel contact with a portion of the enclosure.” PO Resp. 6–7 (citing Ex. 2003 ¶¶ 33–35). See also Ex. 2008, 31:10–33:18, 109:18–110:19 (Petitioner’s expert, Mr. Oslan, suggesting that a first component or object in parallel contact with and positioned under a second component or object would not necessarily indicate that the first component or object is embedded in the second component or object). Similarly, we also agree that “the claims of the ’257 use the term ‘embedded in’ while also using the word ‘embedded’ in other contexts, which” indicates distinct claim scope for “the term ‘embedded in,’” versus “the broader term ‘embedded.’” Ex. 2003 ¶ 38. For instance, claim 9 distinctly requires “embedded with,” which is a broader term that, according to Dr. Kenny, encompasses embodiments where a lead may be adjacent/parallel to the first portion of the enclosure. Id.” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“under the exterior of the first portion” (see Pet. 21–22, 24–25; Pet. Reply 4); and (3) leaf spring 62 is embedded in housing 12 and electrode 14 (see Pet. 22–24). None of Petitioner’s mappings disclose every element of claim 1 and Petitioner improperly jumps between these various mappings without fully examining a single mapping for each and every limitation of claim 1. See Pet. 18–25. In essence, Petitioner invites the Board to piece together a single theory that meets all claim elements from these disparate theories that each require distinct structure within Mills. See Amazon.com, Inc., et al. v. Avago Technologies General IP (Singapore) PTE. LTD., IPR2017-01112, Paper 11, at 13 (PTAB Aug. 23, 2017) (“Petitioner is inviting us to assume the role of archeologist of the record, which invitation we decline.”).” slip op. at 36
Patent outcomesUS 10,076,257 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,076,257 - Copeland Comfort Control LP v. Ollnova Technologies Ltd.All claims unpatentablePTAB · Oct 1, 2024 · IPR2023-00624 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–5, 7–11, 13–16, and 20–21 are unpatentable: claims 1–5, 7–11, and 20–21 over McFarland, and claims 13–16 over McFarland and Kates-089.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Claim 1 recites “a multi-sensor package configured to detect a plurality of variables and generate sensor data for each detected variable.” Ex. 1001, 10:46–48. Both parties agree that a “multi-sensor package” is a single packaged device with multiple sensors, not a group of individual sensors. See PO Resp. 6; Pet. Reply 2. Claim 1 does not recite a multi-sensor package with “multiple operational sensors.” Patent Owner does not explain the difference between operational sensors and sensors “configured” as recited in claim 1 or why claim 1 should be construed as requiring an “operational” limitation that does not appear in the claim. Consequently, a requirement that the sensors comprising the package be “operational” is neither required by claim 1 nor suggested by the language of claim 1.” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would have had a minimum of a bachelor’s degree in electrical engineering, or a related field, along with at least two years of professional experience in sensors, controls, and/or wireless communications.” Pet. 10–11 (citing Ex. 1002 ¶¶ 46–49). Petitioner further contends that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. Patent Owner does not address the level of ordinary skill in the art. See PO Resp. We apply Petitioner’s level of skill in the art because it appears consistent with the problems addressed in the ’282 patent and the prior art.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“McFarland discloses an exemplary sensor 209 that “is configured as any of a temperature sensor, humidity sensor, fire sensor, pressure sensor, smoke sensor, occupancy sensor, air quality sensor, gas sensor, O2, CO2, or CO sensor, accelerometer, velocity sensor, [or] combinations thereof” and “may be . . . micro-mechanical sensors . . . or larger sensors for sensing any condition or parameter.” Ex. 1027 ¶ 43 (emphasis added). Patent Owner submits that paragraph 43 of McFarland describes “a device . . . that sense[s] conditions, parameters and/or events such as an environmental condition in a building.” PO Resp. 28 (emphasis added). Based on the foregoing, we find that McFarland teaches “a multi-sensor package configured to detect a plurality of variables.” Ex. 1002 ¶ 72 (“sensor 209 may be configured to detect multiple different variables including temperature, humidity, and other variables”); Ex. 1027 ¶ 43. McFarland further discloses “sensor 209 generates information or data related to the sensed or monitored condition” and “output as one or more signals that may be read by the processor 214.” Ex. 1027 ¶ 43. McFarland further discloses that “information may be generated in response to a physical stimulus such as light, sound, pressure, heat, magnetism, motion, and/or acceleration” that “may be detected as a result of sensing or monitoring the conditions or parameters.” Id.; see also id. ¶ 44 (“A signal generated by the sensor 209 may be an indicator of the sensed condition.”). McFarland also discloses that “processor 214 implements a control process for the device 207” that “may be implemented based on a signal that is read from and/or provided by the sensor 209, such as a measured value of a parameter, an indicator of a sensed condition and/or status of an event.” Id. ¶ 39. Thus, we find McFarland teaches that sensor 209 “generate[s] sensor data for each detected variable.” Ex. 1002 ¶ 74 (“For each condition that it monitors, the sensor generates and outputs sensor data for each measured variable in the form of ‘a measured variable’ or ‘indicator.’” (citing Ex. 1027 ¶¶ 39, 45, 47)). For the foregoing reasons and after reviewing Petitioner’s evidence in light of Patent Owner’s contentions, we find that McFarland teaches this limitation.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Motivation to Combine/Reasonable Expectation of Success Petitioner contends that McFarland discloses that a wireless automation device wakes up and enters a standby or sleep mode in response to a report instruction. Pet. 46. Petitioner acknowledges that McFarland “does not explicitly state that the ‘report instruction’ includes a ‘wake-up command’ or describe how the device is instructed to return to a ‘sleep’ mode between reporting intervals.” Id. (citing Ex. 1027 ¶¶8, 18, 48, 62). Petitioner next contends that Kates-089 “teaches that such a ‘report instruction’ comprises a ‘wake-up command,’ and that a controller issues a ‘standby mode’ instruction (i.e., a ‘power down command’).” Id. (citing Ex. 1029 ¶¶ 78, 82, 86). According to Petitioner, an ordinarily skilled artisan “would have been motivated to modify McFarland with” the teachings of Kates-089 “to advantageously facilitate reporting data both periodically and in response to commands while conserving power via ‘wake-up’ and ‘standby’ (i.e., power-down) commands.” Id. (citing Ex. 1002 ¶ 147; Ex. 1027 ¶ 62; Ex. 1029 ¶¶ 40, 74–75, 82, 86); id. at 47 (arguing that an ordinarily skilled artisan in light of Kates-089 “would have been motivated to modify McFarland’s ‘report’ instruction to include a wake-up command” (citing Ex. 1002 ¶ 149)) (emphasis omitted). Petitioner further contends that an ordinarily skilled artisan would have been motivated to combine McFarland and Kates-089 “to save power consumed during, e.g., the 99.9% of the polling interval when the device may otherwise be unnecessarily turned on.” Id. at 48 (citing Ex. 1002 ¶ 150). Petitioner next contends that an ordinarily skilled artisan would have had a reasonable expectation of success “applying Kates-089’s wake-up and power-down command teachings to McFarland’s wireless automation device” because “McFarland already teaches that the wireless automation device wakes up and powers down in response to certain commands[] and such commands were well understood.” Pet. 48 (citing Ex. 1002 ¶ 151; Ex. 1005 ¶ 32; Ex. 1027 ¶¶ 8, 18, 48, 62; Ex. 1032, 12:48–54; Ex. 1033, 12:16– 22) (emphasis omitted). Patent Owner does not address motivation to combine or reasonable expectation of success for claim 13. See PO Resp. 26–35. We have reviewed Petitioner’s evidence and contentions and find that” slip op. at 45
Patent outcomesUS 8,224,282 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,224,282 - New Balance Athletics, Inc. v. Nike, Inc.Institution deniedPTAB · Sep 26, 2024 · IPR2024-00778 · APJ Josiah C Cocks · IPR · Institution
The Board denied institution because the petition did not show a reasonable likelihood of prevailing on any challenged claim: Clark and Mills each failed to disclose required limitations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“partes review may not be instituted unless the information presented in the Petition shows that “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a); see also 37 C.F.R § 42.4(a) (“The Board institutes the trial on behalf of the Director.”).” slip op. at 2
- BurdenDecided for patent owner
“in a continuous fashion, as shown in Figure 5, and this will include the portion that will be used for the upper (the textile element) and the material that is trimmed away (the surrounding textile structure)” (citing Ex. 1003 ¶¶ 124–125)). Notably absent, however, from the above-identified portions of the Petition and testimony of Dr. Bookstein is any reference to material that is “trimmed away” or why any such material is regarded as surrounding a textile element, or any other component of Clark. In a later portion of the Petition addressing the second clause of limitation 1a, Petitioner makes reference to Clark’s column 4, lines 61 through 66, as disclosing a “trimming process.” Pet. 23–24 (citing Ex, 1003 ¶ 128). That portion of Clark generally expresses that “the exposed edge of the upper may be trimmed in any desired outline . . . and the trimmed edge may be bound or finished as desired.” E. 1004, 4:61–66. We agree with Patent Owner that, to the extent Petitioner and Dr. Brookstein rely on that portion of Clark to account for the first clause of limitation 1a, Petitioner does not meaningfully explain why Clark’s disclosure of “the potential trimming of an ‘exposed edge’ (singular)” of any textile element means that the textile element is regarded as “hav[ing] been knitted with a surrounding textile structure.” See Prelim. Resp. 15–16 (citing Ex. 2003 ¶ 38). We credit Dr. Pastore’s testimony to that end, over that of Dr. Brookstein (see, e.g., Ex. 1003 ¶ 128), as we find that Dr. Pastore’s testimony is more consistent with Clark’s actual disclosure and what it would have conveyed to one of ordinary skill in the art.” slip op. at 19
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner states, “[f]or purposes of this Preliminary Response only, Nike applies New Balance’s proposed level of skill in the art.” Prelim. Resp. 13. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’749 patent and the asserted prior art, and we apply it in our patentability evaluations below.” slip op. at 11
- Expert testimonyPatent owner expert creditedDecided for patent owner
“in a continuous fashion, as shown in Figure 5, and this will include the portion that will be used for the upper (the textile element) and the material that is trimmed away (the surrounding textile structure)” (citing Ex. 1003 ¶¶ 124–125)). Notably absent, however, from the above-identified portions of the Petition and testimony of Dr. Bookstein is any reference to material that is “trimmed away” or why any such material is regarded as surrounding a textile element, or any other component of Clark. In a later portion of the Petition addressing the second clause of limitation 1a, Petitioner makes reference to Clark’s column 4, lines 61 through 66, as disclosing a “trimming process.” Pet. 23–24 (citing Ex, 1003 ¶ 128). That portion of Clark generally expresses that “the exposed edge of the upper may be trimmed in any desired outline . . . and the trimmed edge may be bound or finished as desired.” E. 1004, 4:61–66. We agree with Patent Owner that, to the extent Petitioner and Dr. Brookstein rely on that portion of Clark to account for the first clause of limitation 1a, Petitioner does not meaningfully explain why Clark’s disclosure of “the potential trimming of an ‘exposed edge’ (singular)” of any textile element means that the textile element is regarded as “hav[ing] been knitted with a surrounding textile structure.” See Prelim. Resp. 15–16 (citing Ex. 2003 ¶ 38). We credit Dr. Pastore’s testimony to that end, over that of Dr. Brookstein (see, e.g., Ex. 1003 ¶ 128), as we find that Dr. Pastore’s testimony is more consistent with Clark’s actual disclosure and what it would have conveyed to one of ordinary skill in the art.” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,266,749
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.