• Gettattle, Inc. v. Afterwords, Inc.All claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00677 · APJ Ryan H Flax · IPR · Final written decision

  Claims 1–7, 10, 13, 16, 18, and 19 are unpatentable as anticipated by Douglas and Ganesh; the revised contingent motion to amend is denied.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “record before us, we conclude that Petitioner proves by a preponderance of the evidence that each challenged claim of the ’811 patent is anticipated by Douglas and by Ganesh. Accordingly, we find that claims 1–7, 10, 13, 16, 18, and 19 of the ’811 patent are unpatentable. Moreover, we find that Patent Owner’s Revised Contingent Motion to Amend adds new matter in every proposed substitute claim, and, therefore, the motion is denied.” slip op. at 80

  • 112 supportMotion to amend, deniedDenied

    “Because the RMTA does not meet the foundational statutory and regulatory requirements, we decline to reach Petitioner’s arguments as to the asserted unpatentability of the proposed substitute claims. C. CONCLUSION ON REVISED MOTION TO AMEND Because the RMTA does not meet foundational statutory and regulatory requirements for a motion to amend, it is denied.” slip op. at 80

  Patent outcomesUS 10,430,811 unpatentable
  § 102 anticipationcites Phillips
  Patents in suitUS 10,430,811
• Evenflo Company, Inc. v. Baby Jogger II, LLCAll claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53

  Patent outcomesUS 11,731,682 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 11,731,682
• First Quality Retail Services, LLC / First Quality Consumer Products, LLC et al. v. Essity Hygiene And Health ABAll claims unpatentable
  PTAB · May 12, 2026 · IPR2024-01487 · APJ Kristina M Kalan · IPR · Final written decision

  Claims 1–5, 7, 8, 20–22, 24, and 25 are unpatentable, based on anticipation by Bergstrom and obviousness over the stated combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Institution Decision, we adopted Petitioner’s definition. Dec. 9–10. In its Response, Patent Owner cites to Petitioner’s definition and states that Patent Owner “applies Petitioners’ definition.” PO Resp. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’138 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “We begin our analysis with the language of the claims. Phillips, 415 F.3d at 1312; see also SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 874–875 (Fed. Cir. 2004) (“There is a ‘heavy presumption’ that the terms used in the claims ‘mean what they say and have the ordinary meaning that would be attributed to those words by persons skilled in the relevant art.’”). Claim 1 recites, in relevant part, “said fluid flow control structure being a layered structure comprising a non-perforated fibrous polymeric layer and a first perforated polymeric layer.” Ex. 1001, 13:62–64 (limitation [1h]). The plain language of claim 1 does not address additional properties of the perforated polymeric layer; the language of the dependent claims, however, imposes additional limitations on the properties of the perforated polymeric layer such as a particular basis weight (claim 2), a particular makeup (claim 3), a particular aperture size (claim 7), a particular open area (claim 8), and that it “is a three-dimensionally formed layer having penetrating apertures extending from a first surface of the first perforated polymeric layer towards a second surface of the first perforated polymeric layer and forming protrusions on said second surface” (claim 4). The dependent claims’ additional language indicates that the term “perforated” within the term “perforated polymeric layer” in claim 1 is not limited in the manner asserted by Patent Owner’s proposed construction.” slip op. at 12

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “layer pierced through with holes or apertures,” we are persuaded that Petitioner meets its burden as to this limitation. Petitioner argues that under our construction, Bergstrom’s express disclosure of forming element 60, and Bergstrom’s explanation of the properties of forming element 60, meets the claimed “perforated polymeric layer” limitation. Pet. 38–41 (citing Ex. 1002 ¶¶ 114–117). Even under Patent Owner’s proposed construction, Petitioner argues, forming element 60 would also allow free flow of liquid bodily waste. Pet. Reply 3– 4 (citing Ex. 1021 ¶¶ 20–23). Importantly, Bergstrom expressly discloses: “suitable materials for the forming element 60 are plastic films, perforated plastic films and reinforced tissue or reinforced nonwoven materials.” Ex. 1004, 10:1–4. This express disclosure is clear. Even though the forming element 60 in Bergstrom might be “typically” liquid-impermeable (Ex. 1004, 9:24–30), that does not preclude a layer that is perforated, particularly where Bergstrom expressly discloses a perforated plastic film as one of the possibilities for forming element 60. Ex. 1004, 10:1–4. Additionally, although Patent Owner focuses on Bergstrom’s disclosure that forming element 60 is “typically liquid-impermeable” (PO Resp. 58–60; Ex. 1004, 9:24–30), we do not view Bergstrom’s use of the word “typically” as mandating that the forming element always be liquid impermeable. We agree that the word “typically” does not mean “always” and that such a reading would render “typically” superfluous. Pet. Reply. 5. We do not find any ambiguity in Bergstrom’s disclosure regarding possible use of perforated plastic films for its forming element 60; whether or not the forming element 60 provides other functions (like stiffness) does not dictate whether it may also be perforated, or be part of a fluid flow control structure. On this point, we credit Petitioner’s arguments and explanation, as supported by Dr. Pourdeyhimi’s testimony. Pet. Reply 6–7; Ex. 1021 ¶ 27–28 (“components of absorbent articles could be multifunctional”).” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “from the start” (PO Resp. 29), and that “using all or part of [Glaug’s] fluid-acquisition system in place of [Nakazawa’s] diffusion sheet would be antithetical to the teachings of both references” (id. at 35), we agree that the proposed combination of Nakazawa’s structure with the layers of Glaug is sufficiently motivated and reasonably expected to result in a successful article, for the reasons articulated by Petitioner. See, e.g., Pet. 59–65; Ex. 1002 ¶¶ 176–192. Namely, although fluid may flow in both Z directions in Nakazawa (PO Resp. 30), that does not foreclose the combination with Glaug in the manner proposed by Petitioner. See generally Ex. 1002 ¶¶ 176–192; see id. ¶ 184 (detailing the mechanics of the proposed combinations), ¶¶ 188–191 (discussing motivation to combine), ¶ 192 (discussing reasonable expectation of success). The combination can be achieved “either by adding the lower acquisition layer 64 [of Glaug] to diffusion sheet 63 [of Nakazawa], or by replacing diffusion sheet 63 [of Nakazawa] with the two-layer fluid acquisition system 34 [of Glaug],” and as persuasively explained by Dr. Pourdeyhimi, the arrangement constitutes a “fluid flow control structure.” See Ex. 1021 ¶¶ 45–47. Additionally, the diffusion sheet in Nakazawa can be made from the same material as used in Glaug, namely, AquiDry™. Id. ¶¶ 53–55; see also Tr. 17:25–18:3 (“although Glaug does not specify the name AquiDry in its disclosure, Patent Owner’s expert testified that it’s his understanding that Glaug is discussing the AquiDry material, the same material that is in Nakazawa . . . . they disclose using the same material, and Nakazawa says this material work[s]”). When asked if Patent Owner’s expert had any concerns that AquiDry was not the same as between Nakazawa and Glaug, Patent Owner’s counsel replied “They are the same, Your Honor. And we embrace that.” Tr. 46:8–12; see also id. at 58:19 (Petitioner’s counsel commenting about Patent Owner’s counsel: “they agree, AquiDry is used in both Nakazawa and Glaug”). Thus, Patent Owner’s argument that Nakazawa’s diffusion sheet and Glaug’s fluid acquisition layer have different purposes because Nakazawa’s diffusion sheet allegedly must promote fluid flow in the Z-directions, both toward and away from the body (PO Resp. 29–37; Ex. 2004 ¶¶ 26–28, 30– 35)) is not clearly supported by Nakazawa, and is also contravened by the shared disclosure of Nakazawa and Glaug as to the composition of the disputed layer. We have reviewed the complete record, including Patent Owner’s and Mr. Sheldon’s assertions that Nakazawa requires promoting fluid flow in both Z-directions (see id.), but find that Petitioner carries its burden to demonstrate that one of ordinary skill in the art would have been motivated to combine Nakazawa and Glaug with a reasonable expectation of success. On this complete record, Petitioner explains sufficiently why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, i.e., to use Glaug’s fluid acquisition system, or the lower non-perforated layer of its fluid acquisition system, in Nakazawa, and Petitioner provides well-supported reasons for doing so.” slip op. at 36

  Patent outcomesUS 9,308,138 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,308,138
• Nxtgen Toys, LLC v. Zipstring, LLCAll claims unpatentable
  PTAB · Feb 20, 2026 · IPR2024-01213 · APJ Richard H Marschall · IPR · Final written decision

  Claims 1–4, 12, and 15–17 are unpatentable; substitute claim 27 is allowed, while substitute claims 21–26 and 28 are denied as obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person having ordinary skill in the art at the time of the invention “was typically a person with a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or other science or 6 Patent Owner does not rely on any objective indicia of nonobviousness in this proceeding. engineering based degree that [was] familiar with general principles of mechanics and aerodynamics with at least two years of experience in product design and development in the field of toys or other amusement type devices.” Pet. 32 (citing Ex. 1002 ¶¶ 2–6, 22–26). Patent Owner states that it submitted the following proposal for a POSITA in the related district court litigation: “[a POSITA] would have had at least a B.S. degree in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Industrial Design, Product Design, or similar field, with at least two years industry experience in one of these fields, and such POSITA would have been familiar with general principles of mechanics, fluid mechanics and aerodynamics.” PO Resp. 4–5. We note that the parties’ proposals overlap considerably, and neither party argues the inadequacy of the other party’s proposal or that any patentability issue in this case turns on the resolution of this issue. We find Petitioner’s definition consistent with the problems and solutions disclosed in the ’774 patent and prior art of record, and adopt it as our own. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). We would arrive at the same findings and conclusions in this Decision if we adopted Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner contends that no “term requires construction to resolve the invalidity grounds presented in this Petition since the prior art renders claims 1–4, 12, and 15–17 unpatentable under any reasonable interpretation of the claims.” Pet. 7. Patent Owner argues that it “does not believe express claim constructions are necessary during this proceeding because the claims can readily be given their ordinary and customary meaning in the context of the patent at the time it was filed.” PO Resp. 5. Based on the parties’ positions and our view of the record, we need not expressly construe any claim limitations to resolve the issues in this Decision. To the extent that any implicit claim construction issues relate to the issues raised by the parties, we address them in the context of the parties’ patentability arguments below.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “string, and that adding Scorch’s slot removes this arguably inconvenient process by allowing insertion and removal of a string without removing and reinstalling any aspects of the housing. See Pet 85–86 (citing Ex. 1002 ¶¶ 174–175; Ex. 1007, 3:30–3:53, 6:03; Ex. 1008, 3:46–4:45); Pet. Reply 18–20 (citing in part Ex. 2002 ¶ 187 (Dr. Janét’s testimony that Wagner’s removal and reinstallation of a cover “may be viewed as an inconvenient process”)). Making insertion and removal of the string easier and quicker provides a notable advantage over Wagner’s existing device. See id. Scorch itself supports this argument and the related expert testimony because it discusses insertion and removal of strings and stated that the slot allows a user to “swap them out really quick.” Ex. 1007, 3:30–53. Petitioner also persuasively argues that a POSITA would know how to add the slot while maintaining the proper operation of the device, such as allowing insertion and removal of the string and avoiding inadvertent exiting of the string from the device. See Pet. 86–87 (citing Ex. 1002 ¶¶ 175–176; Ex. 1007, 4:00–30, Ex. 1008, 2:49–52); Pet. Reply 19, 21 (citing Ex. 1002 ¶¶ 174–176). We find Petitioner’s arguments and reasoning in support of adding Scorch’s slot to Wagner’s housing straightforward and persuasive. Patent Owner’s arguments against the combination do not directly refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176).” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “refute Petitioner’s reasoning or cast doubt on Scorch’s statement that its slot enables “quick” insertion and removal of a string—quicker than Wagner’s method that requires removal and replacement of a cover on its housing. See PO Resp. 16–22; PO Sur-reply 14–20; Ex. 2002 ¶ 187 (acknowledging inconvenience of Wagner’s existing process for insertion and removal of a string). Patent Owner suggests that Petitioner’s proposed combination fails to take into consideration certain drawbacks such as the risk of inadvertent string exit from the housing or slot, but Petitioner expressly addresses such concerns in the Petition. See PO Resp. 18 (stating that Scorch’s slotted funnel may allow the string to “shoot out the slot” and that Scorch addresses this by adding “a bent wire” to “prevent the string from coming out the side”); PO Sur-reply 16–17; Pet. 86–87 (arguing that Wagner’s flanges would help to trap the string in place, but if not, Scorch’s additional structures could be used to restring the string and “to further reduce the risk of a string inadvertently exiting” the device). We agree with Petitioner that a POSITA would understand how to incorporate Scorch’s slot without causing inadvertent removal of the string—using structures already present in Wagner and Scorch—and the need to add such unclaimed structurers does not teach away from the combination as Patent Owner suggests. See Pet. 86–87; PO Resp. 22. We also agree with Petitioner that a POSITA would understand how to make minor modifications, if necessary, to allow insertion and removal of the string around Wagner’s flanges. See Pet. Reply 21 (citing Ex. 1002 ¶¶ 174–176). At best, Patent Owner’s arguments on this issue establish potential drawbacks in Petitioner’s proposed combination, but drawbacks alone do not defeat Petitioner’s obviousness rationale that includes readily apparent benefits. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”); Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine “). In addition, even if Patent Owner were correct that Wagner’s existing design works as well as Petitioner’s proposed combination, given all of the tradeoffs involved, that would not fatally undermine Petitioner’s showing. In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (obviousness does not require that the proposed combination “is the preferred, or most desirable, combination”). On this record, Petitioner’s (and Scorch’s) stated advantages that are achieved when adding Scorch’s slot to Wagner’s housing adequately support Petitioner’s motivation to combine rationale.” slip op. at 26

  Patent outcomesUS 11,674,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Nautilus
  Patents in suitUS 11,674,774
• Boe Technology Group Co., Ltd. v. Optronic Sciences LLCAll claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01132 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1–7 are unpatentable: claims 1–3 and 5 are anticipated by Anzai, claim 4 is obvious over Anzai and Yamazaki, and claims 1–7 are obvious over Yamazaki and Anzai.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner describes a person of ordinary skill in the art (“POSITA” or “ordinarily skilled artisan”) at the time of the invention as having “a Bachelors’ degree in electrical engineering or a comparable field of study, plus approximately two to three years of professional experience with electronic and optoelectronic device design” and notes that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 5–6 (citing Ex. 1002, Neikirk Decl., ¶ 23). Patent Owner’s expert, Dr. Bretschneider testifies that In my opinion, the field of “electronic and optoelectronic device design” is too broad. A POSITA of the ’121, had at least a Bachelors’ degree in a field of engineering or physics and at least two to three years of professional experience related to the design and manufacture of the relevant aspects of flat panel displays. Additional relevant graduate education related [sic] could reduce but not eliminate the time requirement for professional experience. While Dr. Neikirk proposes a different definition of a POSITA, the differences do not have material effect on my opinions rendered below. Regardless of which definition of a POSITA were used, my conclusions would remain the same Ex. 2005, Bretschneider Decl., ¶ 39. We agree with and will apply Petitioner’s statement of the level of ordinary skill in the art. This level of ordinary skill is reflective of the education and experience that would have been required to understand the problems and solutions identified in the ’121 patent and the prior art. Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001). We note that our conclusions would be the same even if we applied Patent Owner’s slightly narrower definition of a POSITA.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We find these definitions to be of some help in construing this term. We find that the common thread is that a “passivation layer” is an insulating layer that provides protection from the environment to the layers below it. See Ex. 1012, 140; Ex. 1013, 542, Ex. 1014, 798; Ex. 2010, 3; Ex. 2013, 1. We find this construction to be most consistent with the broad claim language and the disclosure in the Specification. Although “tying up dangling bonds,” may be a mechanism by which some materials provide such protection, nothing in the Specification or the extrinsic evidence provided appears to require that. Also, while chemical protection may be one kind of protection none of the evidence suggests that is the only protection that is provided. Moreover, nothing in the Specification supports reading a chemical protection requirement into the construction. Thus, we decline to adopt that portion of Patent Owner’s construction. Instead, we construe passivation layer as “an insulating layer that provides protection from the environment to the layers below it.” We need not construe the term any further to resolve the parties’ dispute over this claim language. See Realtime, 912 F.3d at 1375.” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “constructions for “passivation layer” and “capping layer.” We find that Petitioner has presented sufficient evidence to show that Anzai discloses both a “passivation layer” and a “capping layer.” As we explained above, we have construed “passivation layer” to mean “an insulating layer that provides protection from the environment to the layers below it.” Petitioner has shown that “first planarization film 17” is an insulating layer. See Ex. 1002 ¶¶ 62–65. We further find that Petitioner has shown sufficiently that “first planarization film 17” is “formed over the entire surface for flattening, which will protect the semiconductor surface from the surrounding environment.” Id. ¶ 63. We have rejected Patent Owner’s contentions that the film must tie up “dangling bonds,” and instead determined that protecting the surface from the environment is sufficient. Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the “passivation layer” of claim 3. As we explained above, we have construed “capping layer” to be “an insulation layer covering (i.e., capping) an underlying layer or structure.” Here, Petitioner has shown that Anzai’s planarization film 19 meets the claimed “capping layer.” See Pet. 20. We find that Petitioner has shown that it is more likely than not that “planarization film 19” is made of insulating material. As Dr. Neikirk persuasively testifies, Anzai discloses that planarization layer 17 may be made of an organic resin for flattening the surface. EX1003, 4:20-24. While Anzai does not disclose the material for planarization layer 19, it must be made of an insulation material because in the embodiment of Fig. 3A, it is the sole layer between electrode layer 71 and cathode layer 65 forming the second capacitor. Id., 6:3–8; Fig. 3A. Moreover, Anzai discloses that the first planarization film 17 and the second planarization film 19 for the first embodiment “function as the capacitance insulating film for this configuration.” Id., 5:62–67. Ex. 1002, Neikirk Decl., ¶ 62. We find this testimony well-reasoned and entitled to substantial weight. We further agree with Dr. Neikirk that a “POSITA would further understand that the second planarization film 19 is then further disposed on the first planarization film 17 (capping the passivation layer).” Id. ¶ 63 (citing Ex. 1003, 5:3–13; Figs. 2A–B, 3A–B). Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the claimed “capping layer.” Accordingly, we find that Petitioner has shown by a preponderance of” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “motivation to combine Anzai and Yamazaki. See Pet. 25–27; Ex. 1002, Neikirk Decl., ¶¶ 78–79. First, Patent Owner argues that essentially silicon nitride is an inferior material to use for Anzai’s planarization layer 17 compared with organic resin. PO Resp. 13–15. However, “[i]t’s not necessary to show that a combination is the best option, only that it be a suitable option.” Intel Corp. v. Qualcomm Inc., 21 F.4th 797, 800 (Fed. Cir. 2021) (emphasis in original). Patent Owner does not argue that silicon nitride would not work, but rather that it would be more difficult and more expensive to use. See PO Resp. 14. But “the fact that the two disclosed apparatus[es] would not be combined by businessmen for economic reasons is not the same as saying that it could not be done because skilled persons in the art felt that there was some technological incompatibility that prevented their combination. Only the latter is telling on the issue of nonobviousness.” Grit Energy Solutions LLC v. Oren Techs., LLC, 957 F.3d 1309, 1323 (Fed. Cir. 2020) (quoting Orthopedic Equip. Co., Inc. v. United States, 702 F.2d 1005, 1013 (Fed. Cir. 1983)). “Likewise, a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Here, Petitioner explains that “a POSITA would have known that organic materials usually have lower dielectric constants than inorganic materials, such as SiN, and a higher dielectric constant is desirable for the insulator in a capacitor since that leads to higher capacitance per unit area.” Pet. 26 (citing Ex. 1002, Neikirk Decl., ¶ 78). Petitioner further explains that this “then allows a reduced area storage capacitance element, one of the objectives of Anzai.” Id. (citing Ex. 1003, code (57)). Patent Owner’s focus mainly on planarization (PO Sur-reply 16–17) ignores that the Anzai’s planarization layers 17 and 19 also “function as the capacitance insulating film.” Ex. 1003, 5:65–67. Thus, although there are tradeoffs, Petitioner has shown sufficiently that a POSITA would have been motivated to incorporate the teachings of Yamazaki regarding potential materials for planarization layers 17 and 19. Second, Patent Owner argues that a Petitioner has failed to provide an adequate reason to select silicon nitride from Yamazaki’s list of potential materials. We disagree. Petitioner has explained the benefits of selecting a high dielectric inorganic material. Pet. 26. Yamazaki provides only three potential options—silicon oxide, silicon nitride, and silicon oxynitride. See Ex. 1004, 11:45–50. Moreover, Dr. Neikirk testified, supported by multiple references, that using silicon nitride was well known in the prior art at the time of the invention. See Ex. 1002, Neikirk Decl., ¶ 75 (citing Ex. 1007; Ex. 1008; Ex. 1009). “When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp.” KSR, 550 U.S. at 421. Indeed, “[i]f a person of ordinary skill can implement a predictable variation, § 103 likely bars its patentability.” Id. at 417. This is the case here. Petitioner has shown that a person of ordinary skill seeking to improve the capacitance of Anzai’s planarization layers 17 and 19, without increasing the size of the capacitor, would have looked at the inorganic materials identified in Yamazaki as suitable for the purpose, and it would have been would obvious to choose silicon nitride, a well-known, and predictable material for the application. Thus, we disagree with Patent Owner that Petitioner has failed to show a sufficient reason for selecting silicon nitride from Yamazaki’s list of suitable materials. Third, Patent Owner argues that Petitioner’s contentions only support” slip op. at 37

  Patent outcomesUS 7,586,121 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,586,121
• Allstate Insurance Company v. Atos, LLCSome claims unpatentable
  PTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand

  Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”

  RulingsRemand decision

  • RemandOther

    “was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35

  Patent outcomesUS 9,846,174 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,846,174
• Boe Technology Group Co., Ltd. v. Optronic Sciences, LLCAll claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01133 · APJ Thu A Dang · IPR · Final written decision

  Claims 1–13 are unpatentable: claims 1–5, 9, and 12–13 as anticipated by Weaver, and claims 6–8 and 10–11 as obvious over the stated combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (holding that absent evidence to the contrary, “the prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art). In general, we agree with the areas of agreement in the parties’ proposals. In particular, Patent Owner proposes “at least a Bachelors’ degree in a field of engineering or physics,” which includes “electrical engineering or a comparable field of study” as Petitioner proposes. Pet. 4 (emphasis added); PO Resp. 10. We agree with Petitioner that by defining the engineering field as “electrical” or “comparable,” we can exclude engineering fields “having nothing to do with displays, such as biomedical, civil, chemical or environmental engineering.” Pet. Reply 1. Petitioner also proposes approximately “one or more years of professional experience” which includes Patent Owner’s “at least two years of professional experience.” Pet. 4; PO Resp. 10. Furthermore, both parties agree that “[a]dditional graduate education could [reduce . . . the time requirement] for professional experience.” Id. Thus, we adopt both parties’ proposed POSITA of having a Bachelors’ degree in electrical engineering or a comparable field of study, plus at least two years of professional experience, wherein additional graduate education could reduce the time requirement for professional experience. Id. Such proposal comports with the level of ordinary skill in the art reflected in the prior art of record.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “The plain language in claim 1 of “auxiliary electrode” does not preclude that the “electrode” may be a power line, bus line, or resistor. Ex. 1001, 8:47–52. Nothing in the Specification clearly precludes “auxiliary electrode” from being a “bus line” or “power line,” as Patent Owner proposes. PO Resp. 25–27. We are unpersuaded by Patent Owner’s contention that the Specification discloses that “the power line ‘PL’ is shown in Figure 1, but the power line PL is not an electrode that is shown in Figure 2.” Id. at 26–27. Here, Patent Owner points to no portions in the Specification that provide the requisite “reasonable clarity, deliberateness, and precision” to warrant interpreting the claim language at issue as supporting Patent Owner’s contention that an auxiliary electrode cannot be a power line, bus line, or resistor. Id.; In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1984). That is, although Patent Owner points to Figures 1 and 2 of the Specification for support of its contention, Figures 1 and 2 of the Specification merely show various examples of power line and an auxiliary electrode. PO Resp. 26–27. Thus, although the referenced portions of the Specification discuss various examples wherein an auxiliary electrode may be implemented, nothing in these referenced portions of the Specification clearly precludes the “auxiliary electrode” from being a power line or any electrode that is “the road to get to an end point,” as Patent Owner contends. Id. Patent Owner points to no special definition, implicit or explicit, for “auxiliary electrode” that is set forth in the Specification which supports Patent Owner’s construction with reasonable clarity, deliberateness, and precision. Paulsen, 30 F.3d at 1480.” slip op. at 15

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We find Patent Owner’s arguments unavailing. In particular, we find unavailing Patent Owner’s contention that “‘bus line 430’ is not an ‘auxiliary electrode’” (PO Resp. 28–33), because Patent Owner is relying on a claim construction of “auxiliary electrode” as precluding “essential” elements and requiring “more than the end structure of a conductor” (id.), that is not adopted by our construction discussed above. Here, we are persuaded by Petitioner’s reliance on Weaver’s bus line 430 for providing the claimed “electrode,” that is “supplemental to other electrodes in the structure.” Pet. 18; see also Ex. 1004 ¶ 26, Fig. 4; Ex. 1003 ¶ 92. We find availing Petitioner’s contention, supported by Dr. Baker’s testimony, that a POSITA would have understood that “anode 406 and bus line 430 are connected in parallel,” which means that “bus line 430 is a supplemental electrode that reduces the total resistance of the pixel structure.” Pet. 19; Ex. 1003 ¶ 94. Thus, we find availing Petitioner’s contention, supported by Dr. Baker’s testimony, that Weaver’s bus line 430 is an electrode supplemental to other electrodes in the structure that is electrically insulated from transistor 410 by passivation layer 409, wherein OLED 400, which includes cathode 422, organic layer 424, and anode 406, is disposed above bus line 430, and wherein anode 406 of OLED 400 is electrically connected to bus line 430 by via 428. Pet. 16–19; Ex. 1003 ¶¶ 89–94. That is, we find availing Petitioner’s contention that, like the ’509 patent’s auxiliary electrode 120, bus line 430 is electrically insulated from transistor 410, wherein OLED 400 is disposed above bus line 430 and anode 406 electrically connected with bus line 430. Compare Pet. 2–3 (annotated” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We also find unavailing Patent Owner’s contention that the proposed modifications to Weaver would involve changing the process. PO Resp. 33– 34. We agree with Petitioner, whose contentions are supported by Dr. Baker’s testimony, that “to provide additional components from the same layer is a layout change that a POSITA would have been able to perform without changing the process.” Pet. Reply 17–18 (citing Ex 1003 ¶ 157; Ex. 1020 ¶ 45). Further, contrary to Patent Owner’s contention that POSITA would not have combined Weaver with Lee ’053, Song, Lee ’149, or Bae without the use of hindsight (PO Resp. 33–45), as Petitioner points out, Lee ’149, for example, “explicitly teaches that ‘the electrode pattern 45 serves to lower the resistance of the first electrode 41.” Pet. Reply 58 (citing Ex. 1011 ¶ 38). Similarly, Bae “explicitly teaches that the “auxiliary electrodes 139 contact the first electrode 132 to commonly apply a voltage to the sub-pixels” and “reduces the resistance of the first electrode.” Id. at 66 (citing Ex. 1012 ¶¶ 37, 59). As such, Petitioner’s proposed combinations are supported by at least by Lee ’149’s and Bae’s teachings of applying a second electrode to lower the resistance and voltage drop between anode 406 and the VDD line of Weaver. See, e.g., Ex. 1011 ¶ 38; Ex. 1012 ¶¶ 37, 59. We are persuaded by Dr. Baker’s testimony that a POSITA would have understood that higher resistance between the power or ground line to the light emitting device would consume more power and require higher operating voltages, and thus, would have been motivated to implement the solutions of Lee ’053, Song, Lee ’149, or Bae to lower the resistance between anode 406 and voltage source VDD in Weaver. Ex. 1003 ¶¶ 145, 158, 184, 203. We agree with Petitioner, supported by Dr. Baker’s testimony, that a POSITA would have had a reasonable expectation of success the combining the references as suggested, wherein such modification “involves modifications of only routine skill in the art,” which “involve known method,” and “would have yielded predictable results. Pet. 42, 48–49, 59, 67–68; Ex. 1003 ¶¶ 145, 158, 184, 203. That is, we determine that Petitioner has set forth reasoning with rational underpinning explaining why it would have been obvious to combine the teachings with a reasonable expectation of success. Based on the complete record presented, we determine Petitioner has shown by a preponderance of the evidence that claims 6–8 would have been obvious over the combination of Weaver and Lee ’053 or alternatively over the combination of Weaver and Song, and that claims 10 and 11 would have been obvious over the combination of Weaver and Lee ’149 or alternatively over the combination of Weaver and Bae.” slip op. at 33

  Patent outcomesUS 9,263,509 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,263,509
• Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentable
  PTAB · Jan 7, 2026 · PGR2024-00043 · APJ Ryan H Flax · PGR · Final written decision

  Claims 1–39 are unpatentable under Grounds 1–10; Petitioner did not prove lack of enablement under Ground 11, and Patent Owner’s motion to exclude was denied.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “REAL PARTIES-IN-INTEREST Petitioner identifies Avation Medical, Inc. as the real party-in-interest. Pet. x. Patent Owner identifies EMKinetics, Inc. as the real party-in-interest. Paper 5, 1; Paper 6, 1. Neither party contests the other’s assertions on this. C.” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A POSA at the time of the claimed invention would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices. Additional work experience could substitute for a formal degree and vice versa. Ex.1003, ¶21. Pet. 20 (citing Ex. 1003). Patent Owner does not contest this proposed definition or offer an alternative. See generally Resp. We accept and use Petitioner’s uncontested definition of the ordinarily skilled artisan, which appears to comport with the level of skill in the art reflected in the prior art of record and the ’943 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may]” slip op. at 19

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.200(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner states that, “no terms require construction for purposes of this Petition.” Pet. 21. Patent Owner presents no express position on claim construction. See generally Resp. We do not expressly construe any claim terms. E.” slip op. at 20

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner

    “question, based on factual findings. VidStream, 981 F.3d at 1063–64. Moreover, public accessibility is the touchstone in determining whether a reference is a printed publication and such depends on whether the reference was available to interested, ordinarily skilled persons exercising reasonable diligence, which is determined on a case-by-case basis. Id. at 1065. Particularly pertinent here is that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” Id. Hulu (which cites VidStream on this issue) concerned, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. Hulu, 2021 WL 487622. Hulu holds that, although testimonial evidence is one way to prove public accessibility, there are also a variety of hallmarks of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at *10–13, 21. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established, and whether the reference’s “purpose of publishing . . . was ‘dialogue with an intended audience.’” Id. at *10–21 (citing Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)).” slip op. at 30

  Patent outcomesUS 11,844,943 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 11,844,943
• Straumann USA, LLC v. Smart Denture Conversions, LLCInstituted
  PTAB · Nov 21, 2025 · IPR2025-00956 · APJ Ryan H Flax · IPR · Institution

  The Board instituted IPR on claims 1–12 under all asserted grounds, finding a reasonable likelihood that at least one claim is unpatentable.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institute trial in an inter partes review. We institute an inter partes review only if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’992 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “These two proposed definitions of the ordinarily skilled artisan share many consistencies, for example, the types of degrees and experience such a person would have had, but differ in the number of years of experience. Petitioner proposes the ordinarily skilled artisan would have had at least five years of experience and Patent Owner proposes at least three years (which would necessarily include five years, too). Patent Owner also proposes that the ordinarily skilled artisan would have consulted a dentist, oral surgeon, prosthodontist, or periodontist with experience in dental implants and prosthetics. At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 40. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’992 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This parties may further developed this issue at trial, if desired. C.” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.100(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc).” slip op. at 14

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

    “Here, the first claim limitation at issue is broad, i.e., different thread pattern/profile between a definite and a temporary screw, and the Specification’s and priority applications’ disclosure is narrow and specific, asymmetric buttress style threads in a temporary screw and symmetrical threads in a definite screw (are different). Any apparent predictability in or maturity of the relevant field here must be contrasted with the fact that the Specification, considering the ’992 patent itself or any of the identified priority applications, never once even discusses the (claimed) concept of specifically differing the thread style between a temporary and a definitive screw. Any differences in thread style are not called out by the disclosure, but are described and can be discerned only in relation to the respective threads’ functionality, i.e., Fig. 75’s temporary screw 190 has buttress-style threading so it can be pulled out rather than unscrewed from the abutment; Fig. 9’s definitive screw 75 has male threads that fill the female threads of the abutment 8 for a secure permanent engagement. Ex. 1001, 15:23–30, 21:25–44, 23:3–36; Ex. 1012, 97–98, Figs. 9, 75. And, although it is possible for a single disclosed species to provide written description support for a claimed genus, “a sufficient description of a genus . . . requires the disclosure of either a representative number of species falling within the scope of the genus or structural features common to the members of the genus so that one of skill in the art can ‘visualize or recognize’ the members of the genus.” Ariad, 598 F.3d at 1350; see also Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). That does not appear to be the case here—the present record does not support that the described asymmetrical buttress, serrated style of different temporary screw threading (relative to that of the definitive screw and regardless of the direction of the threads for rotation) is sufficiently representative of the genus’s “different” thread patterns/profiles. See, e.g., Ex. 1006 (a buttress style thread does not function the same as a buttress reverse or 75º joint profile or rounded, or trapezoidal thread).” slip op. at 30

  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham
  Patents in suitUS 11,937,992
• Mim Software Inc. v. Exini Diagnostics AB, Inc.Instituted
  PTAB · Nov 3, 2025 · IPR2025-00827 · APJ Barry L Grossman · IPR · Institution

  The Board instituted IPR on claims 1–5, 7–14, 16–19, 22–26, and 28–32, finding a reasonable likelihood that Renisch anticipates at least one challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not perceive a need to construe any claim limitation at this time. This, however, does not preclude the parties from arguing proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that any disputed claim construction, in general, should be addressed at trial and, if so, should be addressed clearly in a designated section of briefing rather than relegated to arguments on the merits of patentability. Claim construction, if necessary, will be determined at the close of the evidentiary record and after any hearing. slip op. at 15

  • BurdenDecided for petitioner

    “Compliance with the Particularity Requirements of 35 U.S.C. § 312(a)(3) Patent Owner asserts that the Petition fails to meet the particularity requirements of 35 U.S.C. § 312(a)(3). Prelim. Resp. 18–26. According to Patent Owner, “Petitioner’s excessive internal cross-referencing impermissibly forces the Board and Patent Owner to piece together scattered portions of the Petition (and exhibits).” Id. at 26. Patent Owner concludes that “the Petition fails to adequately map the references to the claim elements with particularity.” Id. We disagree. Using claims 1 and 10 as an example, Petitioner asserts: Claim 10 recites a “system for automatically processing 3D images” that is substantively identical to the “method for automatically processing 3D images” recited in claim 1, addressed above. Whereas claim 1 (the method claim) recites a series of steps, each performed “by a processor,” claim 10 (the system claim) recites a “processor” with stored instructions that perform the same steps recited in claim 1. Similarly, dependent claims 11–14, 16, and 26 are substantively identical to dependent claims 2–5, 7, and 19. Pet. 41–42. Claims 1 and 10 contain similar elements and limitations. Petitioner’s reference, for example, in the Petition’s analysis of claim 10, back to the analysis of claim 1 concerning nearly identical elements and limitations (id. at 42) is a matter of efficiency and is sufficiently clear for us to determine the basis for Petitioner’s challenges. We determine that the Petition does not violate the statutory requirement for particularity.” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20

  Claim construction§ 102 anticipationDiscretionary denialcites Phillips
  Patents in suitUS 11,941,817

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.