- Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Foursquare Labs, Inc. v. Boardactive CorporationAll claims unpatentablePTAB · Nov 27, 2024 · IPR2023-00918 · APJ Robert J Silverman · IPR · Final written decision
Claims 1–29 are unpatentable: claims 1–27 under the Adharapurapu (Alcatel) and Kerr obviousness ground, and claims 28–29 under the Adharapurapu (Alcatel) anticipation ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Our Institution Decision addressed the matter of the appropriate level of ordinary skill, in view of the Petition and the Preliminary Response, as follows: The parties’ descriptions of the level of ordinary skill at the time of the invention do not appear to differ in any material way that would affect this Decision. However, at this stage of the proceeding, it is unclear whether it would be proper to require Patent Owner’s proposed requirement of “three years of experience working with digital advertising and geofencing.” Prelim. Resp. 10–11. Accordingly, for the purposes of this [Institution] Decision, we adopt Petitioner’s description of the relevant level of skill in the art, because it appears to be consistent with the level of skill reflected in the ’620 patent and asserted prior art. Inst. Dec. 16. Patent Owner’s Response endorses the determination presented in the Institution Decision. PO Resp. 2. Petitioner does not address our initial determination in its Reply. See generally Pet. Reply. Accordingly, consistent with our Institution Decision, in this Final Written Decision, we employ Petitioner’s description of the relevant level of skill in the art. C. Claim Interpretation” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“The Specification of the ’620 patent supports the understanding that a “consumer” is “a user or person,” per Patent Owner’s proposal (PO Resp. 11). See Ex. 1001, 8:36–38 (“The AdDrop™ may require the consumer to be one of the first few people to input an answer to a question to win the promotion.”) However, Patent Owner’s further proposed requirement — i.e., that a “consumer” be someone “to whom an advertisement may be sent” — would cloud, rather than clarify, the term’s meaning. PO Resp. 11 (emphasis added). For instance, under Patent Owner’s construction, it is not clear if “consumers” require access to the cellular network or Internet in order to be sent advertisements. Further, Patent Owner’s proposed construction would not assist in resolving any issue in this proceeding, contrary to our ambition to construe claim terms “only to the extent necessary to resolve the controversy.” Vivid Techs., 200 F.3d at 803. Moreover, the role of the term “consumer,” in the ’620 patent’s claims, is based upon the relationship of the “consumer” to particular actions and instrumentalities, e.g., associated “media content,” “profile data,” or a “device.” See, e.g., Ex. 1001, 37:57, 66–67, 38:15. In view of the foregoing, we do not adopt Patent Owner’s proposed construction that requires a “consumer” to be a person “to whom an advertisement may be sent.” See PO Resp. 11 (emphasis added). D. Prior Art References” slip op. at 15
- Strike new argumentNew argument disregardedDecided for petitioner
“As an initial matter, such a new argument that is introduced in a Sur- reply is improper. See 37 C.F.R. § 42.23(b) (“A sur-reply may only respond to arguments raised in the corresponding reply.”); Consolidated Trial Practice Guide10 74 (Nov. 2019) (“While replies and sur-replies can help crystalize issues for decision, a reply or sur-reply that raises a new issue or belatedly presents evidence may not be considered. The Board is not required to attempt to sort proper from improper portions of the reply or surreply.”); Hulu, LLC v. SITO Mobile R&D IP, LLC, IPR2021-00158, Paper 34 at 55 (PTAB Apr. 15, 2022). In addition, Patent Owner’s new “geolocation” argument is founded on attorney argument, without adequate support in record evidence, and is contradicted by the unchallenged testimony of Dr. Goldberg. See Ex. 2002 ¶¶ 29–66 (discussing terrestrial location technologies), 175–195 (discussing the disclosure of “geolocation” features in the Adharapurapu (Alcatel) reference).” slip op. at 22
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Yet, Patent Owner does not address Petitioner’s stated reasons (quoted above) for combining teachings of Adharapurapu (Alcatel) and Kerr, regarding the “registering asset data” features of limitation 1(a) (including its subparts) — reasons that are supported by the unchallenged testimony of Dr. Goldberg. See Pet. 50–51 (citing Ex. 1002 ¶¶ 196–197). Still further, Patent Owner does not address Petitioner’s other reasons for combining teachings of Adharapurapu (Alcatel) and Kerr, concerning the recited “content interaction layer” and “consumer tracking layer” features of limitation 1(b) (including its subparts): , POSITA would have found it obvious to incorporate Kerr’s user content interaction features into Alcatel to provide user subjective information/feedback for improving the accuracy, reducing noise, and enhancing efficiency in tailored communications. Pet. 43–44. Petitioner’s discussion of these reasons for combining the references’ teachings is supported by additional unrebutted testimony of Dr. Goldberg. Ex. 1002 ¶ 180. Having considered the parties’ arguments and the evidence of record (including the unchallenged testimony of Dr. Goldberg), we determine that Petitioner has sufficiently shown that the combination of Adharapurapu (Alcatel) and Kerr teach or suggest limitation 1(a) (including all subparts).” slip op. at 23
Patent outcomesUS 10,621,620 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,621,620 - Foursquare Labs, Inc. v. Boardactive CorporationAll claims unpatentablePTAB · Nov 27, 2024 · IPR2023-00919 · APJ Michael L Woods · IPR · Final written decision
Claims 1–23 are unpatentable: claims 13–19 were anticipated by Felt, and claims 1–23 would have been obvious over Adharapurapu and Felt.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“Accordingly, we deny Petitioner’s motion to exclude in its entirety. IV. PATENT OWNER’s MOTION TO EXCLUDE Patent Owner moves to exclude Exhibits 1002 and 1009—the” slip op. at 84
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, the Petition fails to establish that Felt satisfies” slip op. at 34
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableUnpatentable
“uncontroverted testimony of Dr. Goldberg, and the reasoning to combine the references, Petitioner has shown by a preponderance of the evidence that claims 1–23 would have been obvious over the combination of Adharapurapu and Felt (Ground 6). Petitioner has also shown, by a preponderance of the evidence, that Felt anticipates claims 13–19 (Ground 1), renders obvious claims 13–19 (Ground 2), and that claims 1–19 would have been obvious over Felt in view of Creemer or Scofield (Ground 4).” slip op. at 86
Patent outcomesUS 10,692,108 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,692,108 - Copeland Comfort Control LP v. Ollnova Technologies Ltd.All claims unpatentablePTAB · Oct 1, 2024 · IPR2023-00624 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–5, 7–11, 13–16, and 20–21 are unpatentable: claims 1–5, 7–11, and 20–21 over McFarland, and claims 13–16 over McFarland and Kates-089.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Claim 1 recites “a multi-sensor package configured to detect a plurality of variables and generate sensor data for each detected variable.” Ex. 1001, 10:46–48. Both parties agree that a “multi-sensor package” is a single packaged device with multiple sensors, not a group of individual sensors. See PO Resp. 6; Pet. Reply 2. Claim 1 does not recite a multi-sensor package with “multiple operational sensors.” Patent Owner does not explain the difference between operational sensors and sensors “configured” as recited in claim 1 or why claim 1 should be construed as requiring an “operational” limitation that does not appear in the claim. Consequently, a requirement that the sensors comprising the package be “operational” is neither required by claim 1 nor suggested by the language of claim 1.” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would have had a minimum of a bachelor’s degree in electrical engineering, or a related field, along with at least two years of professional experience in sensors, controls, and/or wireless communications.” Pet. 10–11 (citing Ex. 1002 ¶¶ 46–49). Petitioner further contends that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. Patent Owner does not address the level of ordinary skill in the art. See PO Resp. We apply Petitioner’s level of skill in the art because it appears consistent with the problems addressed in the ’282 patent and the prior art.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“McFarland discloses an exemplary sensor 209 that “is configured as any of a temperature sensor, humidity sensor, fire sensor, pressure sensor, smoke sensor, occupancy sensor, air quality sensor, gas sensor, O2, CO2, or CO sensor, accelerometer, velocity sensor, [or] combinations thereof” and “may be . . . micro-mechanical sensors . . . or larger sensors for sensing any condition or parameter.” Ex. 1027 ¶ 43 (emphasis added). Patent Owner submits that paragraph 43 of McFarland describes “a device . . . that sense[s] conditions, parameters and/or events such as an environmental condition in a building.” PO Resp. 28 (emphasis added). Based on the foregoing, we find that McFarland teaches “a multi-sensor package configured to detect a plurality of variables.” Ex. 1002 ¶ 72 (“sensor 209 may be configured to detect multiple different variables including temperature, humidity, and other variables”); Ex. 1027 ¶ 43. McFarland further discloses “sensor 209 generates information or data related to the sensed or monitored condition” and “output as one or more signals that may be read by the processor 214.” Ex. 1027 ¶ 43. McFarland further discloses that “information may be generated in response to a physical stimulus such as light, sound, pressure, heat, magnetism, motion, and/or acceleration” that “may be detected as a result of sensing or monitoring the conditions or parameters.” Id.; see also id. ¶ 44 (“A signal generated by the sensor 209 may be an indicator of the sensed condition.”). McFarland also discloses that “processor 214 implements a control process for the device 207” that “may be implemented based on a signal that is read from and/or provided by the sensor 209, such as a measured value of a parameter, an indicator of a sensed condition and/or status of an event.” Id. ¶ 39. Thus, we find McFarland teaches that sensor 209 “generate[s] sensor data for each detected variable.” Ex. 1002 ¶ 74 (“For each condition that it monitors, the sensor generates and outputs sensor data for each measured variable in the form of ‘a measured variable’ or ‘indicator.’” (citing Ex. 1027 ¶¶ 39, 45, 47)). For the foregoing reasons and after reviewing Petitioner’s evidence in light of Patent Owner’s contentions, we find that McFarland teaches this limitation.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Motivation to Combine/Reasonable Expectation of Success Petitioner contends that McFarland discloses that a wireless automation device wakes up and enters a standby or sleep mode in response to a report instruction. Pet. 46. Petitioner acknowledges that McFarland “does not explicitly state that the ‘report instruction’ includes a ‘wake-up command’ or describe how the device is instructed to return to a ‘sleep’ mode between reporting intervals.” Id. (citing Ex. 1027 ¶¶8, 18, 48, 62). Petitioner next contends that Kates-089 “teaches that such a ‘report instruction’ comprises a ‘wake-up command,’ and that a controller issues a ‘standby mode’ instruction (i.e., a ‘power down command’).” Id. (citing Ex. 1029 ¶¶ 78, 82, 86). According to Petitioner, an ordinarily skilled artisan “would have been motivated to modify McFarland with” the teachings of Kates-089 “to advantageously facilitate reporting data both periodically and in response to commands while conserving power via ‘wake-up’ and ‘standby’ (i.e., power-down) commands.” Id. (citing Ex. 1002 ¶ 147; Ex. 1027 ¶ 62; Ex. 1029 ¶¶ 40, 74–75, 82, 86); id. at 47 (arguing that an ordinarily skilled artisan in light of Kates-089 “would have been motivated to modify McFarland’s ‘report’ instruction to include a wake-up command” (citing Ex. 1002 ¶ 149)) (emphasis omitted). Petitioner further contends that an ordinarily skilled artisan would have been motivated to combine McFarland and Kates-089 “to save power consumed during, e.g., the 99.9% of the polling interval when the device may otherwise be unnecessarily turned on.” Id. at 48 (citing Ex. 1002 ¶ 150). Petitioner next contends that an ordinarily skilled artisan would have had a reasonable expectation of success “applying Kates-089’s wake-up and power-down command teachings to McFarland’s wireless automation device” because “McFarland already teaches that the wireless automation device wakes up and powers down in response to certain commands[] and such commands were well understood.” Pet. 48 (citing Ex. 1002 ¶ 151; Ex. 1005 ¶ 32; Ex. 1027 ¶¶ 8, 18, 48, 62; Ex. 1032, 12:48–54; Ex. 1033, 12:16– 22) (emphasis omitted). Patent Owner does not address motivation to combine or reasonable expectation of success for claim 13. See PO Resp. 26–35. We have reviewed Petitioner’s evidence and contentions and find that” slip op. at 45
Patent outcomesUS 8,224,282 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,224,282 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45
Patent outcomesUS 10,994,923 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,994,923 - Hunter’S Manufacturing Company, Inc. D/B/A Tenpoint Crossbow Technologies v. Ravin Crossbows, LLCAll claims unpatentablePTAB · Jul 9, 2024 · IPR2023-00407 · APJ Robert J Silverman · IPR · Final written decision
Claim 1 is unpatentable as anticipated by Stanziale ’771; the Board did not reach the alternative grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“As an initial matter, the recited expression “mounted to” is broad. The Federal Circuit has explained that words in a claim “will ordinarily be given their full meaning,” without imposing narrowing modifications on the claim language. Johnson Worldwide, 175 F.3d at 989, see also Virginia Panel, 133 F.3d at 865–66. As to whether the “mounted to” connection may be an indirect connection, the parties agree that an indirect connection is permitted — a view that is amply supported by the intrinsic record, as discussed above. With regard to the types of movement that may occur between a “string guide” and a corresponding “limb,” the intrinsic record shows that that various types of movements (including no movement at all) are characterized as “mounted to.” Slight variations of “mounted to,” occurring in the intrinsic record, are helpful in understanding the claim language — particularly because the ’015 patent itself uses such a variant (“mounted . . . on”) to describe the very connection (between a “string guide” and a “limb”) that is elsewhere, and in claim 1, is described as “mounted to.” See Ex. 1001, 5:23–26.” slip op. at 22
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“Patent Owner’ sole argument — i.e., that Stanziale ’771 fails to teach the “mounted to” limitation — is based upon its construction of the “mounted to” limitation, which permits the “string guide” to be rotatable relative the corresponding “limb,” but permits no other type of relative motion. See PO Resp. 4, 13–14. As discussed above, we do not accept Patent Owner’s construction of the “mounted to” limitation. In Stanziale ’771, first and second pulleys 145, 146, and interconnecting pivot 147 (all three of which Petitioner maps to claim 1’s “string guide[s]”) are pivotally connected to a number of intermediate members (e.g., lever arms or pushing arms 32, connecting elements 27, and constraining member 29) which are, in turn, pivotally connected to elastic members 10 (which Petitioner maps to claim 1’s “limb[s]”). See Pet. 41–42 (citing Ex. 1012 7:9–17, 8:26–8:13, 11:8–9, 14:18–15:22, 16:24–25, 16:29, 17:2, 17:15–17, 17:24–27, 19:12–30, 20:32–21:16, Figs. 1–7; Ex. 1016 ¶¶ 177–179); see also Ex. 1012 11:3–7, 11:34–12:4, 12:10–17, 16:29–18:3, 18:22–19:30, Figs. 8, 9, 10a, 10b. Therefore, Stanziale ’771, in Petitioner’s mapping, teaches the “string guide[s]” connected indirectly to the “limb[s].” Per the construction of the “mounted to” limitation employed herein (“connected to, either directly or indirectly”), Petitioner establishes, by a preponderance of the evidence, that Stanziale ’771 teaches the “string guide[s]” “mounted to” the “limb[s],” as recited in claim 1 of the ’015 patent. Contrary to Patent Owner’s concerns (see Paper 47, 1), the indirect connection between Stanziale ’771’s “string guide[s]” and “limb[s]” is not “unbounded.” Rather, the connection disclosed by Stanziale ’771 is the type of indirect connection supported by the intrinsic record. See supra § II.B. Patent Owner’s contention that “a POSA would be disinclined to rely on [Stanziale ’771] as a reference for the improved crossbow design disclosed in Claim 1” is not persuasive. See PO Resp. 38 (citing Ex. 2029 ¶ 46). The test for anticipation is whether a prior art reference discloses each and every element recited in the claim, not whether one of ordinary skill in the art would have been inclined to rely on the reference. See Net MoneyIN, Inc., 545 F.3d at 1369.” slip op. at 32
- ExcludeMotion to exclude, deniedMixed
“Motions to exclude evidence are authorized under 35 C.F.R. § 42.64. Rule 42.64(b)(1) states: “Once a trial has been instituted, any objection [to evidence] must be filed within five business days of service of evidence to which the objection is directed.” Further, “[t]he objection must identify the grounds for the objection with sufficient particularity to allow correction in the form of supplemental evidence.” 35 C.F.R. § 42.64(b)(1). “A motion to exclude evidence must be filed to preserve any objection.” 35 C.F.R. § 42.64(c).” slip op. at 40
- Expert testimonyPatent owner expert creditedDecided for patent owner
“In the present proceeding, Petitioner proposed — and Patent Owner does not dispute (see PO Resp. 3) — the following definition of a person of ordinary skill in the art: A hypothetical POSA to which the ’015 Patent pertains would be a technical person who has at least some experience working in the field of archery, reviewing crossbows or engineering related to bows and/or crossbows, and is generally familiar with prior art crossbows. (Ex. 1016 ¶17.) Such a person would likely have at least a bachelor’s degree in mechanical engineering or, alternatively, would have several years of experience in the field of archery or engineering related to bows and/or crossbows. (Id.) Pet. 28. As discussed above, we adopt Petitioner’s description of a person of ordinary skill for the purposes of this Decision. See supra § II.A. Petitioner alleges various deficiencies in Mr. Teater’s background, education, and knowledge. Paper 39, 4–8. Nevertheless, Mr. Teater satisfies the definition, of a person of ordinary skill in the art, that Petitioner advanced. Specifically, Mr. Teater has reviewed crossbows for 14 years, encompassing the relevant priority date for the ’015 patent, during which time he wrote evaluations of various bows and crossbows, developed and published testing standards for crossbows, and served on the Archery Trade Association’s technical committee for standards and guidelines. Paper 41, 4 (citing Ex. 2029 ¶¶ 3, 4, 7). Accordingly, Mr. Teater satisfies Petitioner’s definition of “a technical person who has at least some experience working in the field of archery, reviewing crossbows or engineering related to bows and/or crossbows, and is generally familiar with prior art crossbows.” Pet. 28. Petitioner emphasizes that Mr. Teater “does not have a degree in mechanical engineering.” Paper 39, 4 (citing Ex. 2034, 1; Ex. 1034, 43:20–44:5). However, no degree of any kind is mandatory for satisfying Petitioner’s definition of a person of ordinary skill in the art. Indeed, Petitioner’s definition states that “[s]uch a person would likely have at least a bachelor’s degree in mechanical engineering or, alternatively, would have several years of experience in the field of archery or engineering related to bows and/or crossbows.” Pet. 28 (emphasis added). There is no dispute that Mr. Teater meets this standard. Petitioner raises various other issues that form no part of the definition that Petitioner advanced — for example, whether Mr. Teater has taught courses related to crossbows, whether he is named as an inventor on a” slip op. at 36
Patent outcomesUS 9,354,015 unpatentableClaim construction§ 102 anticipationcites PhillipsPatents in suitUS 9,354,015 - Home Depot U.S.A., Inc. v. Lynk Labs, Inc.All claims unpatentablePTAB · May 22, 2023 · PGR2022-00009 · APJ Monica S Ullagaddi · PGR · Final written decision
Claims 1–5, 7–12, and 14–19 are unpatentable based on lack of written description, anticipation by Bruning, or obviousness over Bruning and Kabel.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“lighting device.” Accordingly, we determine that the level of ordinary skill in the art is “a bachelor’s degree in electrical engineering, or similar technical field, with two years of relevant experience in the field of design and/or development of LEDs and circuits,” as Petitioner proposes and that “the field of design and/or development” would be “in the context of lighting devices” as Patent Owner proposes, in which “[a]n increase in experience could compensate for less education.” Id.; Pet. 24 (citing Ex. 1002 ¶ 46).” slip op. at 15
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“theoretically fall under the “or greater” portion of the amended claim limitation “forward voltage of 6V or greater,” Applicant distinguished Colby on the basis that the 120V AC voltage from a wall outlet is not “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs.” See Ex. 1023, 9 (emphasis added). Applicant’s argument specifically identifies the claim language at issue––“forward voltage of 6V or greater”––and specifically states that it is not disclosed because Colby does not disclose the minimum voltage and instead, discloses something else, something larger–– 120V AC voltage. Accordingly, we conclude that Applicant disclaimed any voltage that is more than “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs” from the scope of “forward voltage.”” slip op. at 25
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable
“4. 35 U.S.C. § 112(a) With respect to the written description requirement, we are persuaded” slip op. at 32
- Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable
“Basis § Unpatentable Unpatentable Lack of written description, 3, 10, 17 112(a) 3, 10, 17 Lack of enablement 3, 10, 17 112(b) Indefiniteness 3, 10, 17 Lack of written description, 4, 11, 18 112(a) 4, 11, 18 Lack of enablement 4, 11, 18 112(b) indefiniteness 4, 11, 18” slip op. at 77
Patent outcomesUS 10,932,341 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 10,932,341 - Samsung Electronics Co. Ltd. v. Lynk Labs, Inc.All claims unpatentablePTAB · May 10, 2023 · IPR2021-01575 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–9 are unpatentable as obvious over the asserted combinations of Saito and Catalano, Saito and Wojnarowski, and those combinations with Johnson.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art as of the priority date of the ’551 patent “would have had at least a bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or the equivalent, and two or more years of experience with LED devices and/or related circuit design, or a related field.” Pet. 9 (citing Ex. 1002 ¶¶ 19–20). For purposes of this proceeding, “Patent Owner does not dispute Petitioner’s definition of a [person of ordinary skill in the art].” PO Resp. 9. Upon review of the parties’ arguments, the prior art of record, and the ’551 patent, adopt Petitioner’s undisputed level of ordinary skill in the art in this proceeding.” slip op. at 6
- Prior constructionPrior construction adoptedDecided for petitioner
“In IPR2021-01367, which also is directed to the ’551 patent, the Board construed the term “driver” to mean “a program, circuitry, or device used to power other programs, circuits, or devices.” Home Depot USA, Inc. v. Lynk Labs, Inc., IPR2021-01367, Paper 8 at 11–14 (PTAB Feb. 14, 2023) (Institution Decision); see also IPR2021-01367, Paper 46 at 7 (Final Written Decision). Patent Owner believes that this construction is broader than that used by the ’551 patent, “but will nevertheless refer to this construction because it is helpful in resolving the disputes over the teachings of the prior art, because none of the prior art teaches or suggests a driver even under this broader construction.” PO Resp. 10–11. Patent Owner does not propose an alternative construction of the claim term. Id. Petitioner does not contest the adopted construction of “driver.” Pet. Reply 1. Upon review of the parties’ arguments and evidence, and for the reasons expressly set forth in IPR2021-01367, we construe “driver” to mean “a program, circuitry, or device used to power other programs, circuits, or devices.” No other claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 6
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date awardedDecided for petitioner
“connector” to describe the 3-pin connector of Catalano was potentially ambiguous. Based on the full trial record, we are persuaded that the citations provided in the Petition provide sufficient evidence that the ’495 Provisional provides written description support for claim 23 of Catalano.11 In response to Patent Owner’s argument that Catalano’s 3-pin connector 612 is connected to bulb base 616, and there is no evidence that such a connector is used in “a conventional incandescent bulb” (Sur-Reply 9), we find that regardless of the internal components connecting the “standard bulb base” to the LED circuit, the “standard bulb base” is a connector that can fit within “standard bulb sockets” and allow the device to replace a conventional incandescent bulb. Ex. 1006 ¶¶ 5–7. Therefore, it is “a standard bulb power connector equivalent to the power connector of a” slip op. at 14
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Upon review of the record and the parties’ arguments as a whole, we agree with Petitioner that Saito discloses a driver, as that term is used in claim 1 of the ’551 patent. First, our construction of “driver” is broad, constituting any “program, circuitry, or device used to power other programs, circuits, or devices.” And, consistent with the structure of claim 1 of the ’551 patent, this construction does not require that the identified circuit or device actually generate power, only provide power to another device or circuit. switch that turns on or off a power source. Rather, the circuit of Saito monitors the voltage provided at both node A 107 and node B 715 and, depending on the reported voltages, switches between voltage sources to provide power to the LEDs. In this way, the voltage applied to the LED circuit is maintained within a range of roughly 16 and 30 Volts, and the LEDs are driven for a prolonged period of time by capacitors 106 and 107, which Saito explains “cut[s] down the consumption of electric current” and results in more efficient use of power. Ex. 1008 ¶¶ 98–103. We find persuasive Dr. Baker’s testimony that one of ordinary skill in the art would have considered such a circuit to be a “driver,” as recited in claims 1 and 5 of the ’551 patent. Ex. 1002 ¶¶ 94–95, 110–111.” slip op. at 23
Patent outcomesUS 10,154,551 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,154,551
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.