- Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - PTAB · Jan 14, 2026 · IPR2025-01191 · APJ Kara L Szpondowski · IPR · Institution
The Board instituted IPR on claims 1–24 and all asserted grounds because the petition showed a reasonable likelihood of prevailing on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on the current record, and for the reasons explained below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one challenged claim, and we institute an inter partes review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“IV. PATENT OWNER’S 35 U.S.C. § 325(D) ARGUMENTS Patent Owner presents arguments directed to discretionary considerations under 35 U.S.C. § 325(d) and requests the Petition be denied based on these arguments. Prelim. Resp. 2–16. However, Patent Owner’s § 325(d) arguments are untimely under the “Interim Director Discretionary Process,”6 and, as such, will not be considered by the Board. See Section I.C. (“The . . . patent owner should not present discretionary considerations in the . . . Patent Owner Preliminary Response (POPR)”); Section I.E. (“[A] Board panel will issue a decision on institution addressing the merits and other non-discretionary considerations.”). 5 Available at https://www.uspto.gov/patents/ptab/trial-practice-guide#step1 6 https://www.uspto.gov/patents/ptab/interim-director-discretionary-process.” slip op. at 38
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Petitioner bears the burden of establishing that Wang is a printed publication. Medtronic, 891 F.3d at 1380. The determination of whether a document is a “printed publication” “involves a case-by-case inquiry into the facts and circumstances surrounding the reference's disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). “[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.” Hulu, IPR2018-01039, Paper 29 at 13.” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“A claim is unpatentable as anticipated under 35 U.S.C. § 102 “if each and every limitation is found either expressly or inherently in a single prior art reference.” WhitServe, LLC v. Computer Packages, Inc., 694 F.3d 10, 21 (Fed. Cir. 2012) (quoting Celeritas Techs., Ltd. v. Rockwell Int’l Corp., 150 F.3d 1354, 1361 (Fed. Cir. 1998)). An anticipatory reference must also “disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)).” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 10,822,165 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Recor Medical, Inc. / Otsuka Medical Devices Co., Ltd. v. Medtronic Ireland Manufacturing Unlimited Co.Some claims unpatentablePTAB · Nov 3, 2025 · IPR2022-00431 · APJ Eric C Jeschke · IPR · Remand
On remand, claims 1–3 and 8–12 are unpatentable over the instituted grounds; claim 4 was not shown unpatentable.
RulingsRemand decision- RemandOther
“Federal Circuit (Paper 33), which vacated the original Final Written Decision and remanded the proceeding to the Board. See ReCor Med., Inc. v. Medtronic Ir. Mfg. Unlimited Co., No. 2023-2251, 2025 WL 944511 (Fed. Cir. Mar. 27, 2025) (“the Appeal Decision” or “Appeal Dec.”); see also Paper 41 (copy of the Appeal Decision). The Federal Circuit’s mandate issued on May 5, 2025. See Paper 40. We have jurisdiction under 35 U.S.C. § 6, and we issue this Final Written Decision on Remand under 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. For the reasons below, on the complete record, we conclude that Petitioner has proven, by a preponderance of the evidence, the unpatentability of claims 1–3 and 8–12 of the challenged patent, and we conclude that Petitioner has not proven, by a preponderance of the evidence, the unpatentability of claim 4.” slip op. at 2
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedNot shown unpatentable
“and Petitioner’s rebuttal evidence. Objective evidence of nonobviousness, when present, must be considered as part of an obviousness inquiry. Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Notwithstanding what the teachings of the prior art would have suggested to one of ordinary skill in the art, the totality of the evidence submitted, including objective evidence of nonobviousness, may lead to a conclusion that one or more of the challenged claims would not have been obvious to one of ordinary skill in the art. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984).” slip op. at 50
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed
“1. Claims 1–3 and 8–11 Because the obviousness ground based on Levin and Acker is dispositive as to challenged claims 1–3 and 8–11, we need not reach this additional ground as to those claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 371 (2018) (holding that a petitioner “is entitled to a final written decision addressing all of the claims it has challenged”); Boston Sci. Scimed, analysis in the appeal to the Federal Circuit. See Appeal Dec. *1–*2 (summarizing grounds at issue on appeal and not discussing anticipation based on Acker). Inc. v. Cook Grp. Inc., 809 F. App’x 984, 990 (Fed. Cir. 2020) (nonprecedential) (stating that the “Board need not address issues that are not necessary to the resolution of the proceeding,” such as “alternative arguments with respect to claims [the Board] found unpatentable on other grounds”); SK Hynix Inc. v. Netlist, Inc., IPR2017-00692, Paper 25 at 40 (PTAB July 5, 2018) (determining all challenged claims to be unpatentable and not addressing additional grounds). 2. Dependent Claim 4 As to dependent claim 4, in the context of this ground, Petitioner relies on Acker as to the additional limitations in claim 4 in the same manner as relied on in the context of the ground based on Levin and Acker. See Pet. 73 (“The combination teaches this element for the same reasons described in [the obviousness ground based on Levin and Acker], claim 4, with the exception that [one of ordinary skill in the art] would have been motivated based on his or her knowledge of prior renal denervation work, as noted above.”). Thus, for the same reasons discussed above (see § II.C.3.c), we determine, based on the complete record, that Petitioner has not demonstrated by a preponderance of the evidence that claim 4 would have been obvious based on Acker and the knowledge of one of ordinary skill in the art. G. Asserted Obviousness of Claim 12 Based on Acker, the Knowledge of a Person of Ordinary Skill in the Art, and Yock Petitioner asserts that claim 12, which depends from independent claim 1, would have been obvious based on Acker, the knowledge of one of ordinary skill in the art, and Yock. Pet. 12, 75; Pet. Reply 35–36. Patent Owner provides arguments addressing this ground. PO Resp. 57–60; PO” slip op. at 75
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“1. Independent Claim 1 Petitioner contends that Acker discloses each limitation of claim 1. Pet. 61–63; Pet. Reply 35. In the “Overview of the Ground” section, Petitioner references its proposed construction of the phrase “configured to” and states that “it is proper to consider whether the prior art is ‘capable of’ performing the recited functions, as opposed to requiring that a designer of a prior art device have actually conceived of the recited functional language.” Pet. 61. Petitioner continues: “If the PTAB agrees that this is the proper approach to claim construction, then Acker also anticipates the claims challenged in this ground.” Id. For the reasons below, we determine, based on the complete record, that Petitioner has not demonstrated by a preponderance of the evidence that claim 1 is anticipated by Acker. As to element 1d, which includes the phrase “configured to,”16 Petitioner states that Acker is capable of being used to target renal neural fibers outside of the blood vessel to thermally induce modulation of target neural fibers while protecting non-target tissue in the blood vessel wall from thermal injury for the reasons discussed under claim 1, limitation [1d] and in the section entitled “Reasonable Expectation of Success”, beginning on page 37 [of the Petition]. Pet. 62–63 (citing Daft Pet. Decl. ¶ 179) (first bracketed text added by Petitioner). Patent Owner argues that, in the context of this asserted ground based” slip op. at 71
Patent outcomesUS 8,845,629 mixed§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,845,629 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Harbor Island Dynamic, LLCInstitutedPTAB · Apr 4, 2025 · IPR2024-01402 · APJ William V Saindon · IPR · Institution
The Board instituted review of claims 1–19 on all petitioned grounds, finding a reasonable likelihood that claim 1 is anticipated by Okashita.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“petition and in the parallel proceeding. After the Preliminary Response was filed, Petitioner submitted a stipulation stating that it will not pursue, in the District Court Litigation, any ground that was raised or could have reasonably been raised in this proceeding. Paper 8, 1. Petitioner’s stipulation aligns with the stipulation relied on by the Board in Sotera Wireless, Inc. v. Masimo Corp., IPR2020-01019, Paper 12 at 18–19 (PTAB Dec. 1, 2020) (precedential). Patent Owner argues that we should reject any “late” Sotera stipulation. Prelim. Resp. 47–48. The only authority cited for this argument are Board decisions concerning stipulations filed after a Decision on Institution was entered. Id. As Petitioner’s stipulation was filed prior to this Decision being entered, it is not “late” under the authority Patent Owner cites, and, thus, on this record, we decline to reject Petitioner’s stipulation. See NXP USA, Inc. v. Impinj, Inc., IPR2021-01556, Paper 13 (Sept. 7, 2022) (precedential) (holding that the only appropriate time for a petitioner to offer a stipulation is prior to the Board’s decision on institution) cited in CAPJ Memo, 2 n.1. In Sotera Wireless, the Board found that a stipulation such as the one proffered here by Petitioner addressed “concerns of duplicative efforts between the district court and the Board, as well as concerns of potentially conflicting decisions” and “ensures that an inter partes review is a ‘true alternative’ to the district court proceeding.” Sotera, IPR2020-01019, Paper 12 at 19. For these reasons, we find that this factor weighs “strongly in favor of not exercising discretion to deny institution.” Id.” slip op. at 9
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review under 35 U.S.C. § 314(b) and 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons provided below, we determine that Petitioner has demonstrated a reasonable likelihood that at least one claim of the ’886 patent is unpatentable, and we institute an inter partes review. 37 C.F.R. § 42.108(a).” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We begin our analysis by pointing out that neither party offers a claim construction of “cascaded transistors,” though both parties reference the understanding of the term set forth by Petitioner’s declarant. Although we do not reject Petitioner’s declarant’s definition, we also do not adopt it as the meaning of “cascaded transistors” at this time, absent the parties’ proposal that we do. According to the ’886 patent, transistors simply “coupled in series” are “cascaded.” Ex. 1001, 6:50–51. We use this disclosure to guide our analysis. Reviewing Figure 7 of Okashita, we see a configuration of transistors 1 and 2 that appears, on this record, to be coupled in series. When transistor 2 acts as a shunt for transistor 1, i.e., when the threshold voltage of transistor 2 has been overcome, then current flows through transistor 1, through transistor 2, and then to ground. Ex. 1004, 7:15–17. At this preliminary stage, this is a sufficient showing that Okashita’s transistors are “cascaded” as contemplated by the ’886 patent.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“intervening silicon layer between the source/drain junctions and the buried silicon oxide layer. Pet. 60. Petitioner asserts that a person of ordinary skill in the art would have had a reason to take advantage of Okashita’s design: (1) to “reduce the operating temperature of the transistors,” which will “enhance their performance and reliability,” (2) to “prevent leakage of radio frequency signals,” and (3) to “minimize the effect of mismatch.” Id. at 60– 63. Patent Owner’s first argument is that a person of ordinary skill in the art would not look to Okashita because Okashita “is entirely focused on keeping AC and DC grounds separate,” something Patent Owner argues “is not present in Burgener.” Prelim. Resp. 37. It is not clear to us on this record that Patent Owner is correct that keeping AC and DC grounds separate is not present in Burgener, given that Burgener has both AC signals coming in from ports A–D, as well as digital control signals coming in from the control ports (e.g., 1708 and 1718, for port A). See Ex. 1006 ¶¶ 100–101 (discussing RF ports and control signals). In any event, even if the particular problem solved by Okashita is not one of the problems articulated in Burgener, that does not mean that the teachings of Okashita cannot be applied to Burgener. KSR, 550 U.S. at 420 (“any need or problem known in the field . . . and addressed by the patent can provide a reason for combining the elements in the manner claimed”). Petitioner has asserted three reasons, mentioned above, why a person of ordinary skill in the art would look to improve Burgener with Okashita’s teachings, and Patent Owner does not appear to contest them at this time.” slip op. at 26
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 7,745,886 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Harbor Island Dynamic, LLCInstitutedPTAB · Mar 24, 2025 · IPR2024-01405 · APJ Arthur M Peslak · IPR · Institution
The Board instituted review of claims 1–20 on all petitioned grounds, finding a reasonable likelihood of unpatentability and declining discretionary denial under Fintiv.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review under 35 U.S.C. § 314(a). See 37 C.F.R § 42.4(a) (2023) (“The Board institutes the trial on behalf of the Director.”). Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Considering the Petition, the Preliminary Response, as well as all supporting evidence, we conclude that the information presented in the Petition establishes a reasonable likelihood that Petitioner would prevail in its challenge of at least one claim of the ’826 patent as unpatentable. Pursuant to 35 U.S.C. § 314, we hereby institute an inter partes review of all challenged claims of the ’826 patent on all grounds stated in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“To establish anticipation under 35 U.S.C. § 102, each and every element in a claim, arranged as recited in the claim, must be found in a single prior art reference. Net MoneyConn, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008); Karsten Mfg. Corp. v. Cleveland Golf Co., 242 F.3d 1376, 1383 (Fed. Cir. 2001). Each element of the challenged claim must be found, either expressly or inherently, in the single prior art reference. Verdegaal Bros., Inc. v. Union Oil Co. of Cal., 814 F.2d 628, 631 (Fed. Cir. 1987). When evaluating a prior art reference in the context of anticipation, the reference must be “considered together with the knowledge” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Whether an ordinarily skilled artisan would have been motivated to modify the teachings of a reference is a question of fact.” WBIP, LLC v. Kohler Co., 829 F.3d 1317, 1327 (Fed. Cir. 2016) (citations omitted). “[W]here a party argues a skilled artisan would have been motivated to combine references, it must show the artisan ‘would have had a reasonable expectation of success from doing so.’” Arctic Cat Inc. v. Bombardier Recreational Prods. Inc., 876 F.3d 1350, 1360–61 (Fed. Cir. 2017) (quoting In re Cyclobenzaprine Hydrochloride Extended-Release Capsule Patent Litig., 676 F.3d 1063, 1068–69 (Fed. Cir. 2012)). slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“have had at least a master’s degree in electrical engineering or a similar field and at least two years of experience working with semiconductor systems” and “[a]dditional relevant work experience can compensate for less education, and vice versa.” Pet. 23 (citing Ex. 1003 ¶¶ 73–74). Patent Owner agrees with Petitioner’s proposed level of ordinary skill in the art for the purposes of the Preliminary Response. Prelim. Resp. 16–17. For the purposes of this Decision, we apply Petitioner’s proffered level of skill in the art because it appears consistent with the problems addressed in the ’826 patent and the prior art.” slip op. at 9
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,245,826 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Harbor Island Dynamic, LLCInstitutedPTAB · Mar 24, 2025 · IPR2024-01403 · APJ Arthur M Peslak · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) “would have had at least a master’s degree in electrical engineering or a similar field and at least two years of experience working with semiconductor systems. Additional relevant work experience can compensate for less education, and vice versa.” Pet. 22–23 (citing Ex. 1003 ¶ 63). For purposes of the Preliminary Response, Patent Owner applies Petitioner’s level of ordinary skill in the art. Prelim. Resp. 7. For the purposes of this Decision, we apply Petitioner’s proffered level of skill in the art because it appears consistent with the problems addressed in the ’673 patent and the prior art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Neither Petitioner nor Patent Owner proposes any claim construction. Pet. 19; Prelim. Resp. 8. Based on our review of the record, we determine that no express construction of any claim term is necessary for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“For a prior-art reference to qualify as analogous art, the reference must either be in the field of the applicant's endeavor or reasonably pertinent to the problem with which the inventor was concerned. In re Oetiker, 977 F.2d 1443, 1447 (Fed. Cir. 1992). References are selected as being reasonably pertinent to the problem based on the judgment of a person having ordinary skill in the art. Id. (“[I]t is necessary to consider ‘the reality of the circumstances,’ –– in other words, common sense––in deciding in which fields a person of ordinary skill would reasonably be expected to look for a solution to the problem facing the inventor.” (quoting In re Wood, 599 F.2d 1032, 1036 (CCPA 1979))). Further, in Wyers v. Master Lock Co., 616 F.3d 1231 (Fed. Cir. 2010), the Federal Circuit directed that the scope of analogous art is to be construed broadly. Id. at 1238 (citing KSR Intern’l Co. v. Teleflex, Inc., 550 U.S. 398, 402 (2007)).” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner argues that an ordinarily skilled artisan “would have been motivated to avoid the overfilling of trench sides in Yin’s deep isolation trench that would result from using unchamfered corners by instead using chamfered corners.” Pet. 25 (citing Ex. 1003 ¶ 85). According to Petitioner combining Koshimizu and Yin “is nothing more than using a known method (chamfering a deep isolation trench) that yields a known result (e.g., a reduction in necessary isolating material in said trench.).” Id. (citing Ex. 1003 ¶ 85). Petitioner next contends that an ordinarily skilled artisan would have had a reasonable expectation of success because “[c]hamfering the outer corners of Yin’s trench would have required nothing more than an adjustment to the mask pattern that defines the outline of the trench to have chamfered corners instead of square corners.” Pet. 26 (citing Ex. 1003 ¶ 89). Petitioner further contends that “[i]t was also known in the art that 135˚ angle corners (i.e., chamfered), rather than 90˚ angle corners (i.e., unchamfered) were one solution to improve problems associated with trench refill.” Id. at 26–27 (citing Ex. 1003 ¶ 89). Patent Owner does not directly address Petitioner’s motivation to combine and reasonable expectation of success arguments. Prelim. Resp. 11–15. We have reviewed Petitioner’s contentions and evidence and find, based on the present record at this stage of the proceeding, that Petitioner sufficiently establishes that an ordinarily skilled artisan would have had a motivation to combine Yin and Koshimizu with a reasonable expectation of success.” slip op. at 24
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 7,772,673 - Mercedes-Benz USA, LLC v. Daedalus Prime LLCSome claims unpatentablePTAB · Feb 4, 2025 · IPR2023-01345 · APJ William V Saindon · IPR · Final written decision
Claims 1–4, 7–11, and 14–20 were shown unpatentable over White or Nussbaum; claims 5, 6, 12, and 13 were not shown unpatentable over White or Nussbaum with Shakkarwar.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We are not inclined to adopt Patent Owner’s proposal to require a specific number of years (or a fully bounded range) in the definition of the level of ordinary skill in the art. First, Patent Owner has not offered any legal authority supporting or explaining its position. Second, using the term “at least [X] years” is common practice and generally understood to be an approximation regarding the minimum level of skill of a hypothetical person—in other words, no precision can truly be expected of the specific number of years in this context. In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (“The person of ordinary skill in the art is a hypothetical person.”). The point of the exercise is to provide context for a holistic obviousness analysis. See id. (setting out “various factors” used to analyze the level of ordinary skill); Ryko Mfg. Co. v. Nu-Star, Inc., 950 F.2d 714, 718 (Fed. Cir. 1991) (“The importance of resolving the level of ordinary skill in the art lies in the necessity of maintaining objectivity in the obviousness inquiry.”); Kimberly-Clark Corp. v. Johnson & Johnson, 745 F.2d 1437, 1453 (Fed. Cir. 1984) (the hypothetical person is an “an imaginary being possessing ‘ordinary skill in the art’ created by Congress to provide a standard of patentability”). We are not persuaded of a need for strict precision in the number of years of experience of a hypothetical person used in our analysis in this case. Third, Patent Owner asks for no particular relief based upon its argument. That is, even if we agreed to remove “at least,” Patent Owner does not argue that the outcome of the Decision would be any different.1 1 For example, setting the level of skill to exactly two years of experience would not serve to automatically disqualify an expert having ten years. Kyocera Senco Ind’l Tools v. Int’l Trade Com’n, 22 F.4th 1369, 1377 (Fed. Cir. 2022) (requiring that “a witness must at least have ordinary skill in the art” and stating that “it would be improper to require an expert witness to possess ordinary skill in the art and nothing more”). In conclusion, we apply Petitioner’s proposed level of ordinary skill because it is reasonably consistent with the level of skill implied in the disclosure of the ’588 patent and the cited prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“The description of “mapping” in the ’588 patent makes clear to us that it is an association of an input value from a set of input values to a corresponding output value from a set of output values. Id. at 2:44–46 (describing “the mapping table that associates non-core domain operating frequencies and corresponding interconnect operating frequencies”) (emphases added). The “association” described here in the ’588 patent is not merely describing the fact that both exist, but that knowing the value of the first causes you to know the value of the second. This is also how it is described in the claims, wherein the “mapping” is “of selectable frequencies of the graphics processing circuitry to selectable frequencies of the interconnect.” Id. at 8:63–65 (emphasis added). Or more generally, the claim recites a mapping of a frequency to a frequency. In sum, although we agree with the parties that “mapping” should be given its plain and ordinary meaning in light of the specification, we note that the parties appear to dispute whether the prior art teaches the claimed “mapping” based on differing understandings of the plain and ordinary meaning. Based on our analysis above, we determine that a person of ordinary skill in the art reviewing the ’588 patent would understand that the “mapping” limitation requires (1) frequencies mapped to frequencies and (2) that a mapping is an association of one value to a corresponding value such that knowing the graphics frequency means that you know the corresponding interconnect frequency. Further, given that the corresponding frequencies are “selectable,” we understand that to mean that there is a set of possible frequencies that are defined from which to select. Ex. 2001, 21:19–22:2. With this understanding, we can turn to the dispute over whether the prior art teaches the limitations set forth in claims 5 and 12, as no other terms require construction at this time. Realtime, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms. . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Given this disclosure, we agree with the testimony of Patent Owner’s expert that Shakkarwar’s empirical calculation, by looking up the frequencies of various devices and summing them up, is not the claimed mapping of frequencies to frequencies. Ex. 2002 ¶ 44 (citing Ex. 1006, 6:8– 16, 6:49–7:17). That is, rather than teaching the use of the graphics device frequency get a corresponding interconnect frequency, Shakkarwar calculates the interconnect frequency by adding up the frequencies of all of the devices using the interconnect. Ex. 1006, 6:63–7:30; Ex. 2002 ¶ 44 (“Considerations of the hardware are addressed through empirical calculation, by knowing the requested data bandwidth of each device.”). Based on the above, we find that Shakkarwar’s table does not map a set of frequencies to a set of frequencies, and we find that the alleged mapping in Shakkarwar is not what is required by the claim because knowing the non-core device frequency in Shakkarwar is insufficient to know the required interconnect frequency. Thus, we credit the testimony of Patent Owner’s expert that Shakkarwar does not teach the claimed mapping. Ex. 2002 ¶¶ 42–45. On the other hand, the testimony of Petitioner’s expert is conclusory on this point, and fails to grapple with these differences between the claims and prior art. Ex. 1003 ¶ 140. Thus, we credit the testimony of Patent Owner’s expert over Petitioner’s expert as to the teachings of Shakkarwar.” slip op. at 16
- BurdenMixed
“that Petitioner has not shown sufficiently that Shakkarwar teaches the claimed mapping limitation, for the following reasons. The lookup table in Shakkarwar has a list of clock speeds (frequencies) for specific devices. Ex. 1006, 7:7–10. These clock speeds represent the bandwidth needs of each individual device. Id. at 7:10–13. By looking up the bandwidth needs of each individual device in use, the system can determine the total bandwidth need. Id. at 7:5–17. For example, if one device requires 20 Megabits of data and the second device requires 10 Megabits of data, then the data rate (bandwidth) required will be 30 Megabits of data. Id. at 7:13–17. If the required bandwidth is different from the current bandwidth, then the current bandwidth must be modified. Id. at 7:18–26. Given this disclosure, we agree with the testimony of Patent Owner’s expert that Shakkarwar’s empirical calculation, by looking up the frequencies of various devices and summing them up, is not the claimed mapping of frequencies to frequencies. Ex. 2002 ¶ 44 (citing Ex. 1006, 6:8– 16, 6:49–7:17). That is, rather than teaching the use of the graphics device frequency get a corresponding interconnect frequency, Shakkarwar calculates the interconnect frequency by adding up the frequencies of all of the devices using the interconnect. Ex. 1006, 6:63–7:30; Ex. 2002 ¶ 44 (“Considerations of the hardware are addressed through empirical calculation, by knowing the requested data bandwidth of each device.”). Based on the above, we find that Shakkarwar’s table does not map a set of frequencies to a set of frequencies, and we find that the alleged mapping in Shakkarwar is not what is required by the claim because knowing the non-core device frequency in Shakkarwar is insufficient to know the required interconnect frequency. Thus, we credit the testimony of Patent Owner’s expert that Shakkarwar does not teach the claimed mapping. Ex. 2002 ¶¶ 42–45. On the other hand, the testimony of Petitioner’s expert is conclusory on this point, and fails to grapple with these differences between the claims and prior art. Ex. 1003 ¶ 140. Thus, we credit the testimony of Patent Owner’s expert over Petitioner’s expert as to the teachings of Shakkarwar.” slip op. at 15
Patent outcomesUS 10,705,588 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,705,588 - Mercedes-Benz USA, LLC v. Daedalus Prime LLCNo claims unpatentablePTAB · Jan 8, 2025 · IPR2023-01343 · APJ Thomas L Giannetti · IPR · Final written decision
Claims 1–7, 13–15, 17, and 18 were not shown unpatentable because Bose and White, alone or in the asserted combinations, failed to teach claimed workload comparisons or workload monitoring.
RulingsFinal written decision- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We are persuaded and find for the reasons given that Petitioner fails to prove by a preponderance of the evidence that White teaches or suggests “receiving a bus workload for a communication bus and a first processing element workload for a first processing element based on an integrated circuit reaching a limit.” Patent Owner’s expert Dr. Brogioli testifies that “[t]he workload is a function of the demands imposed by, e.g., applications running on the system, and may or may not be subject to direct control, whereas the conditions under which that workload is processed are controlled directly.” Brogioli Decl. ¶ 66. We agree with Dr. Brogioli and find that White’s frequency and voltage monitoring and adjustments do not result in the power management logic receiving the bus workload as recited in claim element 4[a]. Id. ¶¶ 64–66. We find the testimony of Mr. Wyatt on this issue unconvincing. Wyatt Decl. ¶ 103. In support of his opinion that “monitoring the operating voltages and frequencies of the logic core 120A and common logic bridge 110 is monitoring the workload of those components,” he states: “It was well understood that operating frequency and voltage of a component reflect the activity and use, or workload, of that component.” Id. However, he does not provide any evidentiary support for this statement. We, therefore, give it little weight. See PTAB Consolidated Trial Practice Guide 40 (Nov. 2019)5 (“Opinions expressed without disclosing the underlying facts or data may be given little or no weight.”) (citing Rohm & Haas Co. v. Brotech Corp., 127 F.3d 1089, 1092 (Fed. Cir. 1997)).” slip op. at 30
- Skill levelSkill level petitioner adoptedDecided for petitioner
“response. Paper 9. At the institution stage, therefore, Patent Owner did not dispute Petitioner’s description of a person of ordinary skill in the art or provide its own description. We regarded Petitioner’s description as consistent with the prior art before us. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). Thus, for the purpose of our Institution Decision, we adopted Petitioner’s proposal. Institution Dec. 12–13. In its Response, Patent Owner states that it “uses this definition” in its analysis. PO Resp. 15 (citing Brogioli Decl. ¶ 25). In view of the foregoing, for this Decision, we adopt the description of the person of ordinary skill articulated by Petitioner and used in our Institution Decision. In light of our review of the complete record, we find that this formulation is consistent with the ’494 patent and the prior art of record, and is supported by the testimony of Mr. Wyatt. See Wyatt Decl. ¶ 21.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionGranted
“Post-institution, Patent Owner proposes a construction for the term “workload.” PO Resp. 15–16. Patent Owner contends that “[a] person of ordinary skill in the art would understand that in the ’494 patent, the term ‘workload’ means ‘an amount of activity over a quantum or period of time.’” Id. at 15. Dr. Brogioli’s testimony supports this construction, as does Mr. Wyatt’s. Brogioli Decl. ¶¶ 36–38; Wyatt Dep. 34:14–36:9. The ’494 patent also supports this construction. Ex. 1001, 8:20–22, 9:60–63. Petitioner does not dispute this proposed construction in its Reply. For the reasons given, we adopt Patent Owner’s construction for “workload.”” slip op. at 15
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Nowhere does Petitioner or its expert point to an explicit disclosure in Bose of making a comparison of the claimed “bus workload and a bus workload threshold.” Instead, Petitioner relies on its expert’s opinion as to what a person of ordinary skill might have known, without any additional supporting evidence. See, e.g., Pet. 26 (“[A person of ordinary skill] would have understood global PMCU compares a workload threshold as exemplified by the predicted power and performance of each power mode and the monitored workload to select and adjust the power mode of a component” (citing Wyatt Decl. ¶¶ 54–55)). This opinion is not supported by the record. The only disclosure of a comparison in Bose that we have been shown is the comparison of PowerTotal to PowerMax in step 303 of Figure 3, which Petitioner does not rely on to meet the “comparison” limitation in the claim. Hearing Tr. 17:16–20. Also without proper support is Petitioner’s assertion that “a [person of ordinary skill] would have understood that in Bose, selecting or adjusting power mode for a component entails comparing a workload threshold, such as predicted power and performance associated with each power mode with real time statistics, such as the monitored workload of a component.” Pet. 26 (citing Wyatt Decl. ¶¶ 55–56). We determine that for the reasons given, Petitioner fails to demonstrate by a preponderance of the evidence that the claimed comparison element 1[g] of claim 1 is taught or suggested by Bose. We find, therefore, that Petitioner has not demonstrated that claim 1 is anticipated by Bose, nor has Petitioner demonstrated that to a person of ordinary skill, claim 1 would have been obvious in light of Bose.” slip op. at 25
Patent outcomesUS 8,898,494 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 8,898,494
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.