- Gettattle, Inc. v. Afterwords, Inc.All claims unpatentablePTAB · Oct 5, 2026 · IPR2025-00677 · APJ Ryan H Flax · IPR · Final written decision
Claims 1–7, 10, 13, 16, 18, and 19 are unpatentable as anticipated by Douglas and Ganesh; the revised contingent motion to amend is denied.
RulingsFinal written decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“record before us, we conclude that Petitioner proves by a preponderance of the evidence that each challenged claim of the ’811 patent is anticipated by Douglas and by Ganesh. Accordingly, we find that claims 1–7, 10, 13, 16, 18, and 19 of the ’811 patent are unpatentable. Moreover, we find that Patent Owner’s Revised Contingent Motion to Amend adds new matter in every proposed substitute claim, and, therefore, the motion is denied.” slip op. at 80
- 112 supportMotion to amend, deniedDenied
“Because the RMTA does not meet the foundational statutory and regulatory requirements, we decline to reach Petitioner’s arguments as to the asserted unpatentability of the proposed substitute claims. C. CONCLUSION ON REVISED MOTION TO AMEND Because the RMTA does not meet foundational statutory and regulatory requirements for a motion to amend, it is denied.” slip op. at 80
Patent outcomesUS 10,430,811 unpatentable§ 102 anticipationcites PhillipsPatents in suitUS 10,430,811 - Evenflo Company, Inc. v. Baby Jogger II, LLCAll claims unpatentablePTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53
Patent outcomesUS 11,731,682 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,731,682 - First Quality Retail Services, LLC / First Quality Consumer Products, LLC et al. v. Essity Hygiene And Health ABAll claims unpatentablePTAB · May 12, 2026 · IPR2024-01487 · APJ Kristina M Kalan · IPR · Final written decision
Claims 1–5, 7, 8, 20–22, 24, and 25 are unpatentable, based on anticipation by Bergstrom and obviousness over the stated combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Institution Decision, we adopted Petitioner’s definition. Dec. 9–10. In its Response, Patent Owner cites to Petitioner’s definition and states that Patent Owner “applies Petitioners’ definition.” PO Resp. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’138 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner
“We begin our analysis with the language of the claims. Phillips, 415 F.3d at 1312; see also SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 874–875 (Fed. Cir. 2004) (“There is a ‘heavy presumption’ that the terms used in the claims ‘mean what they say and have the ordinary meaning that would be attributed to those words by persons skilled in the relevant art.’”). Claim 1 recites, in relevant part, “said fluid flow control structure being a layered structure comprising a non-perforated fibrous polymeric layer and a first perforated polymeric layer.” Ex. 1001, 13:62–64 (limitation [1h]). The plain language of claim 1 does not address additional properties of the perforated polymeric layer; the language of the dependent claims, however, imposes additional limitations on the properties of the perforated polymeric layer such as a particular basis weight (claim 2), a particular makeup (claim 3), a particular aperture size (claim 7), a particular open area (claim 8), and that it “is a three-dimensionally formed layer having penetrating apertures extending from a first surface of the first perforated polymeric layer towards a second surface of the first perforated polymeric layer and forming protrusions on said second surface” (claim 4). The dependent claims’ additional language indicates that the term “perforated” within the term “perforated polymeric layer” in claim 1 is not limited in the manner asserted by Patent Owner’s proposed construction.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“layer pierced through with holes or apertures,” we are persuaded that Petitioner meets its burden as to this limitation. Petitioner argues that under our construction, Bergstrom’s express disclosure of forming element 60, and Bergstrom’s explanation of the properties of forming element 60, meets the claimed “perforated polymeric layer” limitation. Pet. 38–41 (citing Ex. 1002 ¶¶ 114–117). Even under Patent Owner’s proposed construction, Petitioner argues, forming element 60 would also allow free flow of liquid bodily waste. Pet. Reply 3– 4 (citing Ex. 1021 ¶¶ 20–23). Importantly, Bergstrom expressly discloses: “suitable materials for the forming element 60 are plastic films, perforated plastic films and reinforced tissue or reinforced nonwoven materials.” Ex. 1004, 10:1–4. This express disclosure is clear. Even though the forming element 60 in Bergstrom might be “typically” liquid-impermeable (Ex. 1004, 9:24–30), that does not preclude a layer that is perforated, particularly where Bergstrom expressly discloses a perforated plastic film as one of the possibilities for forming element 60. Ex. 1004, 10:1–4. Additionally, although Patent Owner focuses on Bergstrom’s disclosure that forming element 60 is “typically liquid-impermeable” (PO Resp. 58–60; Ex. 1004, 9:24–30), we do not view Bergstrom’s use of the word “typically” as mandating that the forming element always be liquid impermeable. We agree that the word “typically” does not mean “always” and that such a reading would render “typically” superfluous. Pet. Reply. 5. We do not find any ambiguity in Bergstrom’s disclosure regarding possible use of perforated plastic films for its forming element 60; whether or not the forming element 60 provides other functions (like stiffness) does not dictate whether it may also be perforated, or be part of a fluid flow control structure. On this point, we credit Petitioner’s arguments and explanation, as supported by Dr. Pourdeyhimi’s testimony. Pet. Reply 6–7; Ex. 1021 ¶ 27–28 (“components of absorbent articles could be multifunctional”).” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“from the start” (PO Resp. 29), and that “using all or part of [Glaug’s] fluid-acquisition system in place of [Nakazawa’s] diffusion sheet would be antithetical to the teachings of both references” (id. at 35), we agree that the proposed combination of Nakazawa’s structure with the layers of Glaug is sufficiently motivated and reasonably expected to result in a successful article, for the reasons articulated by Petitioner. See, e.g., Pet. 59–65; Ex. 1002 ¶¶ 176–192. Namely, although fluid may flow in both Z directions in Nakazawa (PO Resp. 30), that does not foreclose the combination with Glaug in the manner proposed by Petitioner. See generally Ex. 1002 ¶¶ 176–192; see id. ¶ 184 (detailing the mechanics of the proposed combinations), ¶¶ 188–191 (discussing motivation to combine), ¶ 192 (discussing reasonable expectation of success). The combination can be achieved “either by adding the lower acquisition layer 64 [of Glaug] to diffusion sheet 63 [of Nakazawa], or by replacing diffusion sheet 63 [of Nakazawa] with the two-layer fluid acquisition system 34 [of Glaug],” and as persuasively explained by Dr. Pourdeyhimi, the arrangement constitutes a “fluid flow control structure.” See Ex. 1021 ¶¶ 45–47. Additionally, the diffusion sheet in Nakazawa can be made from the same material as used in Glaug, namely, AquiDry™. Id. ¶¶ 53–55; see also Tr. 17:25–18:3 (“although Glaug does not specify the name AquiDry in its disclosure, Patent Owner’s expert testified that it’s his understanding that Glaug is discussing the AquiDry material, the same material that is in Nakazawa . . . . they disclose using the same material, and Nakazawa says this material work[s]”). When asked if Patent Owner’s expert had any concerns that AquiDry was not the same as between Nakazawa and Glaug, Patent Owner’s counsel replied “They are the same, Your Honor. And we embrace that.” Tr. 46:8–12; see also id. at 58:19 (Petitioner’s counsel commenting about Patent Owner’s counsel: “they agree, AquiDry is used in both Nakazawa and Glaug”). Thus, Patent Owner’s argument that Nakazawa’s diffusion sheet and Glaug’s fluid acquisition layer have different purposes because Nakazawa’s diffusion sheet allegedly must promote fluid flow in the Z-directions, both toward and away from the body (PO Resp. 29–37; Ex. 2004 ¶¶ 26–28, 30– 35)) is not clearly supported by Nakazawa, and is also contravened by the shared disclosure of Nakazawa and Glaug as to the composition of the disputed layer. We have reviewed the complete record, including Patent Owner’s and Mr. Sheldon’s assertions that Nakazawa requires promoting fluid flow in both Z-directions (see id.), but find that Petitioner carries its burden to demonstrate that one of ordinary skill in the art would have been motivated to combine Nakazawa and Glaug with a reasonable expectation of success. On this complete record, Petitioner explains sufficiently why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, i.e., to use Glaug’s fluid acquisition system, or the lower non-perforated layer of its fluid acquisition system, in Nakazawa, and Petitioner provides well-supported reasons for doing so.” slip op. at 36
Patent outcomesUS 9,308,138 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,308,138 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Mar 5, 2026 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 3, 8–13, 15, 16, and 19–24 are unpatentable over Brown and Ho, with claims 16 and 19 also relying on the Quick Connection Art; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner proposes that: A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’105 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“of “integrally molded with” as “molded together as a single structure.” Paper 21, 15.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner responds that: a POSITA would not have been motivated to make the proposed modification, nor does the Petition include any analysis regarding why a POSITA would be motivated to move from a vertical extended portion to a radial extended portion. Indeed, a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar as it introduces another sudden directional change into the fluid flow system. PO Resp. 58–59 (citing Ex. 2013 ¶ 242).” slip op. at 32
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“Patent Owner argues that the ’105 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 63–65; PO Sur-reply 26–29. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 of the bowl fill valve 109, the flow of water through the bowl fill valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288. Further, the ’606 Application states: The bowl fill valve 109 may be, for example, a ball valve, a gate valve, a globe valve, a plug valve, a diaphragm valve, a butterfly valve, a needle valve, a sliding gate, a quick turn valve, a knife valve or any other appropriate type of valve as can be appreciated by those with ordinary skill in the art.” slip op. at 42
Patent outcomesUS 9,103,105 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Allstate Insurance Company v. Atos, LLCSome claims unpatentablePTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand
Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”
RulingsRemand decision- RemandOther
“was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35
Patent outcomesUS 9,846,174 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,846,174 - Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentablePTAB · Jan 7, 2026 · PGR2024-00043 · APJ Ryan H Flax · PGR · Final written decision
Claims 1–39 are unpatentable under Grounds 1–10; Petitioner did not prove lack of enablement under Ground 11, and Patent Owner’s motion to exclude was denied.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“REAL PARTIES-IN-INTEREST Petitioner identifies Avation Medical, Inc. as the real party-in-interest. Pet. x. Patent Owner identifies EMKinetics, Inc. as the real party-in-interest. Paper 5, 1; Paper 6, 1. Neither party contests the other’s assertions on this. C.” slip op. at 3
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSA at the time of the claimed invention would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices. Additional work experience could substitute for a formal degree and vice versa. Ex.1003, ¶21. Pet. 20 (citing Ex. 1003). Patent Owner does not contest this proposed definition or offer an alternative. See generally Resp. We accept and use Petitioner’s uncontested definition of the ordinarily skilled artisan, which appears to comport with the level of skill in the art reflected in the prior art of record and the ’943 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may]” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.200(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner states that, “no terms require construction for purposes of this Petition.” Pet. 21. Patent Owner presents no express position on claim construction. See generally Resp. We do not expressly construe any claim terms. E.” slip op. at 20
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner
“question, based on factual findings. VidStream, 981 F.3d at 1063–64. Moreover, public accessibility is the touchstone in determining whether a reference is a printed publication and such depends on whether the reference was available to interested, ordinarily skilled persons exercising reasonable diligence, which is determined on a case-by-case basis. Id. at 1065. Particularly pertinent here is that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” Id. Hulu (which cites VidStream on this issue) concerned, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. Hulu, 2021 WL 487622. Hulu holds that, although testimonial evidence is one way to prove public accessibility, there are also a variety of hallmarks of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at *10–13, 21. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established, and whether the reference’s “purpose of publishing . . . was ‘dialogue with an intended audience.’” Id. at *10–21 (citing Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)).” slip op. at 30
Patent outcomesUS 11,844,943 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,844,943 - Fluidmaster, Inc. v. Danco, Inc.Some claims unpatentablePTAB · Dec 15, 2025 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1, 7–15, 19, and 20 are unpatentable over Brown and Ho; claims 2–6 and 16–18 were not shown unpatentable on the asserted grounds.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Brown’s adapter tube 23 (i.e., the extended portion) does not extend radially from a longitudinal axis of valve assembly 13 (i.e., the toilet fill valve). Ex. 1021, Fig. 1. Mr. Jobin testifies that a POSITA would not be motivated to move adapter tube 23 from a vertical position to a radial position because “a radial extended portion is directly counter to the stated goals of Brown (e.g., reducing noise caused by turbulence), at least insofar system.” Ex. 2013 ¶ 251; see Ex. 1021, 1:9–62. Patent Owner’s argument is persuasive. Petitioner’s analysis and Dr. Cameron’s testimony is conclusory and does not sufficiently explain why a POSITA would be motivated to make the proposed modification to Brown. For example, Petitioner does not sufficiently explain how such a modification would result in a more compact toilet fill valve system that could be adapted to fit in more toilet tank designs. Further, neither Petitioner nor Dr. Cameron sufficiently address Mr. Jobin’s testimony regarding Brown’s desire for a quieter toilet. See Pet. Reply 23; Ex. 1036 ¶ 84. Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 2 is unpatentable over Brown and Ho.” slip op. at 35
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner
“description is an objective inquiry into the four corners of the specification from the perspective of a POSA. Using this test, the invention must be described in a manner sufficient to demonstrate that the inventor actually invented the claimed invention. Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010). “One shows that one is ‘in possession’ of the invention by describing the invention, with all its claimed limitations, not that which makes it obvious.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). Written description is a question of fact judged as of the relevant filing date. Falko–Gunter Falkner v. Inglis, 448 F.3d 1357, 1363 (Fed. Cir. 2006). An ipsis verbis disclosure, however, is not necessary to satisfy the written description requirement. Vas–Cath Inc. v. Mahurkar, 935 F.2d 1555, 1563 (Fed. Cir. 1991). The disclosure need only reasonably convey to a POSA that the inventor had possession of the subject matter in question, even if every nuance of the claims is not explicitly described in the specification. Id.; see Ariad, 598 F.3d at 1351. Patent Owner argues that the ’993 patent claims were “fully supported as of the filing date of at least the ’606 Application . . . March 11, 2004” because the ’606 Application discloses regulating water flow and a POSITA would know that appropriate devices for regulating water flow includes nonadjustable waterflow restrictors. PO Resp. 68; PO Sur-reply 28–30. Patent Owner’s argument is persuasive. The ’606 Application discloses: [W]hen the toilet fill valve 100 is open and water flows from the water inlet 103 to the water outlets 106 and into a toilet tank, an amount of water is also supplied to the bowl fill valve inlet 113 that flows through the bowl fill valve 109 and out the bowl fill valve outlet 116. By virtue of the manual setting of handle 119 valve 109 is regulated. In this manner, the flow of water is regulated so that enough water flows out of the bowl fill valve 109 to fill a toilet bowl without wasting any water down a drain. Ex. 1012, 47, ¶ 8 (emphasis added); see also Ex. 1001, 2:28–39. As can be seen from the passage above, the ’606 Application discloses regulating an amount of water supplied to a toilet bowl using a valve (i.e., a water flow regulator). Ex. 2013 ¶ 288.” slip op. at 48
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable
“1. Analysis of Claims 1–18 Schuster is available as prior art if the ’993 patent is only entitled to its January 27, 2014, filing date and not entitled to claim priority to earlier filing dates of the parent applications. On its face, the ’993 patent claims priority to a number of earlier parent applications, including Application No. 12/786,904 (the ’904 Application) filed May 25, 2010, and the Application code 63. Petitioner contends that the ’993 patent is not entitled to claim priority to the filing date of the earlier parent applications, and, thus, Schuster, a parent application of the ’993 patent, is available as prior art.15 Pet. 91–92. Petitioner alleges that the earlier parent applications, specifically Application No. 12/786,904 (the ’904 Application), do not provide written description support for the ’993 patent’s claim term “water flow regulator.” According to Petitioner, “water flow regulator” encompasses both adjustable devices for restricting the flow of water (i.e., valves) and fixed devices for restricting the flow of water (i.e., restrictors). Pet. 15. Petitioner contends that the ’904 Application does not provide support for water flow restrictors and, thus, does not provide support for the broader claim term water flow regulators. Id. at 14–15, 91–92. Petitioner argues that only adjustable water flow devices (i.e., valves) are supported by the ’904 Application. Id. Petitioner, thus, asserts that earliest effective filing date of the ’993 patent’s claims is the filing date of its application, January 27, 2014. Id. at 92. To be entitled to claim the benefit of an earlier filing date under 35 U.S.C. § 120 each application in the priority chain must comply with the written description requirement of 35 U.S.C. § 112(a). See Hollmer v. 14 The parties do not dispute that the ’993 patent and the earlier parent applications, including the ’904 Application and the ’606 Application, have the same pertinent portions of their specifications. See PO Resp. 71, n.16; Ex. 1004 ¶ 324. 15 Schuster issued on January 31, 2012, from Application No. 12/786,904, filed on May 25, 2010. Ex. 1029, code (21), (22), (45). Schuster, thus, issued more than one year prior to January 27, 2014.” slip op. at 46
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“2. Analysis of Claims 19 and 20 Claim 19 depends from claim 14 and additionally recites, “wherein the waterflow regulator comprises an adjustable water flow regulator that is configured to adjust the flow rate of the second portion of the water based at least in part on a setting of the adjustable water flow regulator.” Ex. 1001, 12:16–20. Claim 20 depends from claim 14 and recites the same additional limitation. Id. at 12:21–24. Claims 19 and 20, thus, require the water flow regulator to be an adjustable water flow regulator. Petitioner indicates that the earlier parent applications provide written description support for an adjustable water flow regulator. Pet. 91 (“[T]he ’904 application specification makes it clear that the adjustability of the bowl fill valve is a desirable and essential feature of the invention”); PO Surreply 28. Accordingly, Petitioner fails to meet its burden to show, by a preponderance of the evidence, that claims 19 and 20 are unpatentable over Schuster.” slip op. at 50
Patent outcomesUS 9,139,993 mixed§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - PTAB · Nov 21, 2025 · IPR2025-00956 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–12 under all asserted grounds, finding a reasonable likelihood that at least one claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in an inter partes review. We institute an inter partes review only if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’992 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“These two proposed definitions of the ordinarily skilled artisan share many consistencies, for example, the types of degrees and experience such a person would have had, but differ in the number of years of experience. Petitioner proposes the ordinarily skilled artisan would have had at least five years of experience and Patent Owner proposes at least three years (which would necessarily include five years, too). Patent Owner also proposes that the ordinarily skilled artisan would have consulted a dentist, oral surgeon, prosthodontist, or periodontist with experience in dental implants and prosthetics. At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 40. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’992 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This parties may further developed this issue at trial, if desired. C.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.100(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc).” slip op. at 14
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner
“Here, the first claim limitation at issue is broad, i.e., different thread pattern/profile between a definite and a temporary screw, and the Specification’s and priority applications’ disclosure is narrow and specific, asymmetric buttress style threads in a temporary screw and symmetrical threads in a definite screw (are different). Any apparent predictability in or maturity of the relevant field here must be contrasted with the fact that the Specification, considering the ’992 patent itself or any of the identified priority applications, never once even discusses the (claimed) concept of specifically differing the thread style between a temporary and a definitive screw. Any differences in thread style are not called out by the disclosure, but are described and can be discerned only in relation to the respective threads’ functionality, i.e., Fig. 75’s temporary screw 190 has buttress-style threading so it can be pulled out rather than unscrewed from the abutment; Fig. 9’s definitive screw 75 has male threads that fill the female threads of the abutment 8 for a secure permanent engagement. Ex. 1001, 15:23–30, 21:25–44, 23:3–36; Ex. 1012, 97–98, Figs. 9, 75. And, although it is possible for a single disclosed species to provide written description support for a claimed genus, “a sufficient description of a genus . . . requires the disclosure of either a representative number of species falling within the scope of the genus or structural features common to the members of the genus so that one of skill in the art can ‘visualize or recognize’ the members of the genus.” Ariad, 598 F.3d at 1350; see also Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). That does not appear to be the case here—the present record does not support that the described asymmetrical buttress, serrated style of different temporary screw threading (relative to that of the definitive screw and regardless of the direction of the threads for rotation) is sufficiently representative of the genus’s “different” thread patterns/profiles. See, e.g., Ex. 1006 (a buttress style thread does not function the same as a buttress reverse or 75º joint profile or rounded, or trapezoidal thread).” slip op. at 30
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,937,992 - PTAB · Nov 3, 2025 · IPR2025-00827 · APJ Barry L Grossman · IPR · Institution
The Board instituted IPR on claims 1–5, 7–14, 16–19, 22–26, and 28–32, finding a reasonable likelihood that Renisch anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not perceive a need to construe any claim limitation at this time. This, however, does not preclude the parties from arguing proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that any disputed claim construction, in general, should be addressed at trial and, if so, should be addressed clearly in a designated section of briefing rather than relegated to arguments on the merits of patentability. Claim construction, if necessary, will be determined at the close of the evidentiary record and after any hearing. slip op. at 15
- BurdenDecided for petitioner
“Compliance with the Particularity Requirements of 35 U.S.C. § 312(a)(3) Patent Owner asserts that the Petition fails to meet the particularity requirements of 35 U.S.C. § 312(a)(3). Prelim. Resp. 18–26. According to Patent Owner, “Petitioner’s excessive internal cross-referencing impermissibly forces the Board and Patent Owner to piece together scattered portions of the Petition (and exhibits).” Id. at 26. Patent Owner concludes that “the Petition fails to adequately map the references to the claim elements with particularity.” Id. We disagree. Using claims 1 and 10 as an example, Petitioner asserts: Claim 10 recites a “system for automatically processing 3D images” that is substantively identical to the “method for automatically processing 3D images” recited in claim 1, addressed above. Whereas claim 1 (the method claim) recites a series of steps, each performed “by a processor,” claim 10 (the system claim) recites a “processor” with stored instructions that perform the same steps recited in claim 1. Similarly, dependent claims 11–14, 16, and 26 are substantively identical to dependent claims 2–5, 7, and 19. Pet. 41–42. Claims 1 and 10 contain similar elements and limitations. Petitioner’s reference, for example, in the Petition’s analysis of claim 10, back to the analysis of claim 1 concerning nearly identical elements and limitations (id. at 42) is a matter of efficiency and is sufficiently clear for us to determine the basis for Petitioner’s challenges. We determine that the Petition does not violate the statutory requirement for particularity.” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20
Claim construction§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 11,941,817 - Gettattle, Inc. v. Afterwords, Inc.InstitutedPTAB · Oct 7, 2025 · IPR2025-00677 · APJ Ryan H Flax · IPR · Institution
Instituted review of claims 1–7, 10, 13, 16, 18, and 19 on all four anticipation grounds because the Petition showed a reasonable likelihood of prevailing.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 37 C.F.R. § 42.4(a), we have authority to determine whether to institute trial in an inter partes review. We may institute an inter partes review if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’811 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“ORDINARY LEVEL OF SKILL IN THE ART Petitioner contends: As of the effective priority date of the ‘811 patent, a person of ordinary skill in the relevant field at the time would be familiar with the pre-existing point of sale and network-based technologies as above, for example in Section I.D. above as well as the “BACKGROUND OF THE INVENTION” portion of the ‘811 patent specification. Ex. 1001, col. 1, l. 21 – col. 5, l. 10. This person would include someone who has, through education or practical experience, at least 2-3 years of experience in software engineering, such as the development of data sets, database management, and networking integration for dynamic content generation and network-based distribution. Pet. 10. Patent Owner states, “[f]or the purposes of this Preliminary Response only, Patent Owner applies Petitioner’s definition of a person of ordinary skill in the art. See Petition, p. 10.” Prelim. Resp. 14. We accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears to comport with the level of skill in the art reflected in the prior art of record and the ’811 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). C.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“The claim language does little to identify any meaning of “point-of- sale interface.” Looking to the ’811 patent’s written description, it never uses the term “point-of-sale interface,” but it states “moder[n] Point-of-Sale (POS) systems . . . capture rich details around their customers’ purchasing activity.” Ex. 1001, 1:52–54. The Specification further states that “[t]he transaction data may be stored locally to a point-of-sale (“POS”) device or to a remote location, such as a cloud service provider.” Id. at 2:23–25. Regarding the associated term “interface,” the written description states, “[i]n general, as used herein, an interface is a component of computer executable instructions stored in a tangible, non-transitory medium and executed by processor 12 to present a display of information related to the interface allowing someone to view and/or interact with the presented information.” Id. at 4:32–37. We are pointed to and find nothing in the ’811 patent’s prosecution history that sheds any further light on the meaning of this language. See Pet. 12–14; Prelim. Resp. 12–13; Ex. 1003. Based on the intrinsic record, we find that the ’811 patent describes a point-of-sale as being local to a transaction, e.g., a sale/purchase of a product” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“At this point in the proceeding, we do not agree with Patent Owner that the recited survey module must be autonomous, self-contained, or a web-container package. As discussed above, we preliminarily interpret this term to mean software code for displaying a survey question. We find no support in the current record to add to this definition any additional requirements related to autonomy, self-containment, or a web-based context for the survey module. The Petition (at 19) points to Douglas as teaching the claimed survey module, i.e., in Douglas, software sent to the customer for taking a product survey on the display of the customer’s computer device. Douglas teaches, in response to a customer providing a survey trigger (e.g., purchase data signals), a survey generator creates a transaction-specific survey (e.g., “Was the item you found too expensive?”) and transmits it to the customer’s device (e.g., a mobile phone with a touchscreen); the survey is interactive; and the customer touches or clicks their device’s screen to respond to the survey questions. Ex. 1007 ¶¶ 34–35. Moreover, Douglas also discloses that its survey “interact[s] with the customer using one or more software applications on customer device 106,” which may be, e.g., a computer or mobile phone, further, “[t]he one or more software applications may be provided by survey system 101, or merchant 107, or a third party,” and finally, “[t]he one or more software applications may be web-based applications and/or native mobile applications installed on the customer device 106.” Id. ¶¶ 18–20; see also Prelim. Resp. 35 (conceding as much). Thus, Douglas appears to disclose a survey system where a survey server responds to a triggering survey token created by a merchant and sent by a customer, that connects the customer with a particular purchase, by creating a purchase-specific survey question and sending it to a customer’s electronic device, where the survey question is displayed on a web-browser by software, and the customer’s survey answers may then spur the system to generate and follow up with additional questions. See Ex. 1007 ¶¶ 18–20, 27–29, 33–39. This appears to include the claimed survey module at issue. As for Patent Owner’s argument that the recited survey module must” slip op. at 31
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,430,811
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.