- Ty Inc. v. Softbelly’S, Inc.All claims unpatentablePTAB · Sep 10, 2021 · IPR2020-00689 · APJ John E Schneider · IPR · Final written decision
Claims 15 and 16 are unpatentable: claim 15 as anticipated by Ogawa and obvious over Ogawa and Masahiro; claim 16 as obvious over Ogawa with Cherk, and with Masahiro and Cherk.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We have considered the arguments presented by the parties and the evidence of record and are not persuaded that our original definition of a person of ordinary skill in the art was in error. While the claims at issue refer to an optical grade fabric, we note that the fabric is not the invention. Rather, as stated in the Specification, the field of the invention is “cleaning tools for electronic display screens, and more specifically to cleaning tools for computer display screens and the like.” Ex. 1001, col. 1, ll. 4–6. The claims further narrow the field of the invention to cleaning tools in the form of a doll-like structure. Id. at col. 6, l. 37. Based on the forgoing, we continue to apply the same definition of a person of ordinary skill in the art we used in our Decision on Institution. However, the findings and conclusions set forth below would have been the same had we instead adopted Patent Owner’s proposed definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“We have considered the arguments presented by the parties and the evidence of record and conclude that Petitioner has the better position. The term “display screen,” as used in the challenged claims, refers to an intended use of the cleaning tool. As such, it does limit the scope of the claims. We begin by noting that the challenged claims are directed to a device or apparatus. Ex. 1002, col. 2, ll. 8–13. As such, the claims “cover what a device is, not what a device does.” Hewlett-Packard Co. v. Bausch & Lomb Inc., 909 F.2d 1464, 1468 (1990). The preamble of both claims 6 and 11 read in part: “doll-like figure for cleaning or wiping the surface of a display screen.” Ex. 1001, col. 6, ll. 37–38; col. 7, ll. 1–2. Both claims end with the clause “providing a pliant cleaning tool for wiping a display screen.” Id. at col. 6, ll. 50–51; col. 7, ll. 13–14. These phrases are crafted in terms of a device for performing a specific function or use. This type of phrase has been found to recite an intended use and not a physical limitation. See Marrin v. Griffin, 599 F.3d 1290, 1294–96 (Fed. Cir. 2010). The recitation of the intended use in the body of the claim does not affect our analysis. The term for wiping a display screen still recites a use of the device that does not impart a structural limitation.” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We have considered the testimony of both experts and the evidence of record and find Mrs. Ryan’s testimony to be more persuasive. Therefore, we agree with Petitioner that Ogawa discloses a wiping tool which has an inner chamber formed by a strip of optical grade fabric — the wipe portion — and a non-optical grade fabric — the gripping body. We give more weight to Mrs. Ryan’s testimony based on her extensive experience in designing plush toys. Ex. 1005 ¶¶ 3–5. Mrs. Ryan has worked in the area of plush toy design for over twenty-six years and has taught classes relating to plush toy design. Id. ¶¶ 3–4; page 40. In addition, Mrs. Ryan’s testimony regarding how one skilled in the art would envision the wiping tool of Ogawa is consistent with the evidence of record. For example, King4 teaches that teddy bears are formed by joining pieces of fabric creating an inner pocket into which stuffing is inserted. Ex. 1026, 7–12. Cockrill5 also teaches that teddy bears are traditionally made by cutting out the material, sewing the pieces together, and then stuffing the bears. Ex. 1025, 67.” slip op. at 17
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“We have considered the testimony of both experts and the evidence of record and find Mrs. Ryan’s testimony to be more persuasive. Therefore, we agree with Petitioner that Ogawa discloses a wiping tool which has an inner chamber formed by a strip of optical grade fabric — the wipe portion — and a non-optical grade fabric — the gripping body. We give more weight to Mrs. Ryan’s testimony based on her extensive experience in designing plush toys. Ex. 1005 ¶¶ 3–5. Mrs. Ryan has worked in the area of plush toy design for over twenty-six years and has taught classes relating to plush toy design. Id. ¶¶ 3–4; page 40. In addition, Mrs. Ryan’s testimony regarding how one skilled in the art would envision the wiping tool of Ogawa is consistent with the evidence of record. For example, King4 teaches that teddy bears are formed by joining pieces of fabric creating an inner pocket into which stuffing is inserted. Ex. 1026, 7–12. Cockrill5 also teaches that teddy bears are traditionally made by cutting out the material, sewing the pieces together, and then stuffing the bears. Ex. 1025, 67. Dr. Adanur’s experience and expertise appears to be primarily focused on textiles. Ex. 2005 ¶¶ 8–24. While Dr. Adanur testified that he has some experience in the area of plush toys, that experience appears to be limited to selection of fabric that could be used to manufacture plush toys and making several puppets at home to earn extra money. Ex. 1027, 52, 57–59, 78–79. In addition, Dr. Adanur does not cite to any evidence other than Ogawa to support his opinions as to what one skilled in the art would envision upon reading Ogawa. See Ex. 2005 ¶¶ 84–87. Patent Owner, however, contends that Ogawa is silent as to whether the tool has an inner chamber made from a piece of optical grade fabric and a piece of non-optical grade fabric. PO Resp. 1, 22. 4 King, Make Your Own Teddy Bears, 1985 (Ex. 1026) (“King”). 5 Cockrill, The Teddy Bear Encyclopedia, 1993 (Ex. 1025) (“Cockrill”).” slip op. at 17
Patent outcomesUS 6,195,831 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,195,831 - Eis GmbH v. Novoluto GmbHRehearing grantedPTAB · Sep 25, 2020 · IPR2020-00007 · APJ Susan L C Mitchell · IPR · Rehearing
Granted EIS GMBH’s rehearing request and instituted IPR of claims 1–3, 5, 7, 8, 11, 14, 15, 17–21, and 23–26 on all asserted grounds.
RulingsRehearing decision- RehearingRehearing, grantedGranted
“We find that Dr. Prisco’s testimony is a reasonable interpretation of how Taylor works if the bellows are bidirectional, and the bellows are expanded and contracted when the suction cup is sealingly engaged. Figure 3 of Taylor shown above appears to support Dr. Prisco’s testimony that the bellows may be expanded or contracted from the initial position shown in Figure 3 and does not appear to show any valve or second opening in the bellows to provide unidirectional flow as Dr. Jensen, Patent Owner’s declarant, asserts. Also, as Petitioner asserts, Taylor indicates that a squeeze ball may be substituted for the bellows expressly indicating a device with a bidirectional flow. Although Patent Owner raises valid arguments concerning a common definition of bellows indicating unidirectional flow and provides testimony from Dr. Jensen reasonably supporting such a position, these dueling positions create a genuine issue of material fact that we weigh in favor of Petitioner on institution. See 37 C.F.R. 42.108(c).” slip op. at 18
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We conclude from a review of Fang and Taylor that they are not substantially the same art nor is Petitioner making substantially the same argument as was presented the Office during prosecution of the ’061 Patent based on Fang. We find that the way in which Fang and Taylor work appear to be materially different. Fang appears to apply only suction to the skin whereas Taylor, with the sealingly connected suction cup, appears to apply a cyclical vacuum that Dr. Prisco testifies meets the claim limitations requiring generation of a pattern of negative and positive pressures, modulated with respect to a reference pressure. Ex. 1002 ¶¶ 62–64, 75. Thus Taylor appears to teach the claim element Patent Owner argued during prosecution was missing from Fang. Also, in applying factors (b) and (d) of Becton, Dickinson, because of such differences noted above, we find that Taylor is not cumulative of Fang, which was considered and applied by the Office during prosecution of the ’061 Patent. 4. Conclusion Thus, we find that Taylor and Fang are not substantially the same art, nor were substantially the same arguments based on these references presented in the Petition and during prosecution of the ’061 Patent, respectively. As discussed above, because Petitioner primarily relies on Taylor in all four grounds for teaching the modulation of positive and negative pressures with respect to a reference pressure as required by all of the challenged claims, we also find that, overall, the same or substantially the same art was not previously presented to the Office nor were the same or substantially the same arguments previously presented to the Office. Therefore, we do not need to reach the application of the remaining Becton, Dickenson factors relating to whether the Petitioner has demonstrated a material error by the Office. Thus, we decline to exercise our discretion under § 325(d) to deny institution of an inter partes review here.” slip op. at 12
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“how Taylor works if the bellows are bidirectional, and the bellows are expanded and contracted when the suction cup is sealingly engaged. Figure 3 of Taylor shown above appears to support Dr. Prisco’s testimony that the bellows may be expanded or contracted from the initial position shown in Figure 3 and does not appear to show any valve or second opening in the bellows to provide unidirectional flow as Dr. Jensen, Patent Owner’s declarant, asserts. Also, as Petitioner asserts, Taylor indicates that a squeeze ball may be substituted for the bellows expressly indicating a device with a bidirectional flow. Although Patent Owner raises valid arguments concerning a common definition of bellows indicating unidirectional flow and provides testimony from Dr. Jensen reasonably supporting such a position, these dueling positions create a genuine issue of material fact that we weigh in favor of Petitioner on institution. See 37 C.F.R. 42.108(c).” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We find that Dr. Prisco’s testimony is a reasonable interpretation of how Taylor works if the bellows are bidirectional, and the bellows are expanded and contracted when the suction cup is sealingly engaged. Figure 3 of Taylor shown above appears to support Dr. Prisco’s testimony that the bellows may be expanded or contracted from the initial position shown in Figure 3 and does not appear to show any valve or second opening in the bellows to provide unidirectional flow as Dr. Jensen, Patent Owner’s declarant, asserts. Also, as Petitioner asserts, Taylor indicates that a squeeze ball may be substituted for the bellows expressly indicating a device with a bidirectional flow. Although Patent Owner raises valid arguments concerning a common definition of bellows indicating unidirectional flow and provides testimony from Dr. Jensen reasonably supporting such a position, these dueling positions create a genuine issue of material fact that we weigh in favor of Petitioner on institution. See 37 C.F.R. 42.108(c).” slip op. at 18
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialPatents in suitUS 9,849,061 - Rimfrost As. v. Aker Biomarine Antarctic As.All claims unpatentablePTAB · Mar 6, 2020 · IPR2018-01730 · APJ John E Schneider · IPR · Final written decision
Claims 1–20 are unpatentable across the stated anticipation and obviousness grounds; the contingent motion to amend with substitute claims 21–29 is denied because those claims are obvious.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“At institution, we preliminarily adopted Petitioner’s definition of an ordinarily skilled artisan, and determined that the prior art itself was sufficient to demonstrate the level of ordinary skill in the art at the time of the invention. Inst. Dec. 8. We note that Patent Owner states that it “accepts [Petitioner’s] definition of a POSITA.” PO Resp. 15. Accordingly, for this Decision, we adopt Petitioner’s definition, while maintaining that the prior art demonstrates the appropriate level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art). Moreover, we have reviewed the credentials of Drs. Tallon and Hoem, and consider each of them to be qualified to provide their opinion on the level of skill and the knowledge of a person of ordinary skill in the art at the time of the invention.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Such broadening usages as ‘about’ must be given reasonable scope; they must be viewed by the decision maker as they would be understood by persons experienced in the field of the invention. Although it is rarely feasible to attach a precise limit to ‘about,’ the usage can usually be understood in light of the technology embodied in the invention.” Modine Mfg. Co. v. U.S. Int’l Trade Comm’n, 75 F.3d 1545, 1554 (Fed. Cir. 1996). After considering the parties’ arguments and reviewing the Specification of the ’765 patent, we conclude that Petitioner’s proposed construction is consistent with the intrinsic evidence. Although the ’765 patent does not explicitly address the issue of “about,” the meaning of the term can be discerned from a careful reading of the Specification. Example 8 of the ’765 patent reports the analysis of phospholipid available Krill product. Ex. 1001, col. 31, l, 46–col. 32, l. 42. Table 22, reproduced above, reports the calculated values for the various phospholipids in values to a tenth of a percent. Id. at col. 32, ll. 18–38. In the discussion of the table, the values are rounded to the nearest whole number, not the nearest tenth. Id. at col. 32, ll. 11–15. This is consistent with the approach advanced by Petitioner. IPR2018-00295, Paper 35, 12.3 Similarly here, we find that although the Specification does not explicitly define the term “about,” its meaning may be discerned from the manner by which the Specification refers to reported values for phospholipid profiles of krill oil. Ex. 1001, 32:18–44 (Table 22). In the discussion of the lipids reported in Table 22, the values are rounded to the nearest whole number, not the nearest tenth. Id. at 32:47–52. This is more consistent with the approach advanced by Petitioner than by Patent Owner. Thus, as determined in that Final Written Decision, and for the reasons set forth therein, “the term ‘greater than about 5% w/w’ shall be construed to mean ‘greater than 4.5% w/w.’” IPR2018-00295, Paper 35, 13.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“We have considered the arguments of the parties and the evidence of record and conclude that claims 5 and 6 are not anticipated by Catchpole. While we agree with Petitioner that Catchpole teaches compositions that can Catchpole discloses a krill oil composition having that amount of acylalkyphospholipids. Catchpole teaches a method of separating lipid materials from a feed material. Ex. 1009, 4. The feed material used in Catchpole may be derived from “terrestrial animals, marine animals, terrestrial plants, marine plants, or micro-organisms such as microalgae, yeast and bacteria. Preferably the feed material is derived from sheep, goat, pig, mouse, water buffalo, camel, yak, horse, donkey, llama, bovine or human.” Id. at 7. Catchpole does not specifically disclose a Krill extract that contains greater than 10% acylalkyphospholipids. The only specific disclosure of the acylalkyphospholipid content of krill oil is in Table 16 discussed above, which discloses an acylalkyphospholipid content of 4.8%, less than the 6% and 7% recited in claims 5 and 6. Based on the foregoing we conclude that claims 5 and 6 are not anticipated by Catchpole. E. Ground 2 - Obviousness Based on Catchpole Combined with Sampalis” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“have been fully and fairly tried in a previous action and adversely resolved against a party-opponent.” Ohio Willow Wood Co. v. Alps South, LLC, 735 F.3d 1333, 1342 (Fed. Cir. 2013) (citing Pharmacia & Upjohn Co. v. Mylan Pharm., Inc., 170 F.3d 1373, 1379 (Fed Cir. 1999)). “It is well established that collateral estoppel, also known as issue preclusion, applies in the administrative context.” MaxLinear, Inc. v. CF CRESPE LLC, 880 F.3d 1373, 1376 (Fed. Cir. 2018) (citations omitted); Webpower, Inc. v. WAG (Final Written Decision). The application of collateral estoppel is not limited to patent claims that are identical. Ohio Willow Wood, 735 F.3d at 1342. “Rather, it is the identity of the issues that were litigated that determines whether collateral estoppel should apply. . . . If the differences between the unadjudicated patent claims and the adjudicated patent claims do not materially alter the question of invalidity, collateral estoppel applies.” Id. As our reviewing court has explained, collateral estoppel precludes a party from relitigating an issue if: (1) prior action presents an identical issue; (2) the prior action actually litigated and adjudged that issue; (3) the judgment in that prior action necessarily required determination of the identical issue; and (4) the prior action featured full representation of the estopped party. VirnetX Inc. v. Apple, Inc., 909 F.3d 1375, 1377 (Fed. Cir. 2018) (quoting Stephen Slesinger, Inc. v. Disney Enters., Inc., 702 F.3d 640, 644 (Fed. Cir. 2012)).” slip op. at 21
Patent outcomesUS 9,072,752 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 9,072,752
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.