- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentablePTAB · Jul 27, 2026 · IPR2025-00565 · APJ Michael R Zecher · IPR · Final written decision
Claims 1–5 are unpatentable because Amazon showed they are anticipated by Shin; the Board did not reach Amazon’s contingent obviousness ground over Shin.
RulingsFinal written decision- BurdenOther
“Written Decision under 35 U.S.C. § 318(a) as to the patentability of claims 1–5 of the ’337 patent. For the reasons we identify below, we hold that Amazon has demonstrated by a preponderance of the evidence that these claims are unpatentable.” slip op. at 2
- Skill levelOther
“2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed
“1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17
Patent outcomesUS 11,069,337 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,069,337 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Tableau Software, LLC v. Icharts LLCAll claims unpatentablePTAB · May 7, 2026 · IPR2024-01387 · APJ Iftikhar Ahmed · IPR · Final written decision
Claims 1–16 are unpatentable under the instituted obviousness grounds, including Becerra, the QlikView Manuals, and combinations with other references.
RulingsFinal written decision- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“why it is trustworthy and how it archives dates by which the webpages were accessible, as this is an information resource on which librarians reasonably rely. See FED. R. EVID. 703. We agree with Petitioner that Dr. Hall-Ellis does have personal knowledge of the facts stated in the remaining testimony (e.g., what she actually downloaded from websites), and that FEDERAL RULE OF EVIDENCE 602 is inapplicable to her testimony offered as an expert. See Pet. Opp. 5–6 (citing Ex. 1030 ¶¶ 26, 29–32, 35, 37–39). We find her testimony to be relevant to the issues presented and specifically to whether the QlikView documents were publicly accessible. We also find no danger that the testimony would confuse the issues or mislead the Board or present unfair prejudice to Patent Owner. Accordingly, we deny Patent Owner’s Motion as to the remaining portion of Dr. Hall-Ellis’s declaration.” slip op. at 92
- Strike new argumentNew argument disregardedGranted
“FURTHER ORDERED that Petitioner’s Motion to Strike portions of Patent Owner’s Reply on its Motion to Exclude (Paper 32) is granted; and” slip op. at 102
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“1. Motivation to Combine Becerra and Couckuyt Petitioner argues that a person of ordinary skill in the art would have been motivated to combine the teachings of Becerra and Couckuyt because such a person would have recognized that Couckuyt discloses useful techniques of assigning data to Becerra’s charts, including assigning data to each axis. Pet. 34 (citing Ex. 1005 ¶¶ 19, 52, Fig. 5; Ex. 1003 ¶ 224). Petitioner contends that Couckuyt discloses associating data from a “spreadsheet document” with a chart, such as a “bar graph.” Id. at 35 (citing Ex. 1006, 6:1–37; Figs. 3a, 3c). below. Petitioner’s annotations to Figure 4 identify “Drop Zones” in red and “Data Fields” in Blue. Id. at 36. Petitioner contends Couckuyt discloses a “drag-and-drop user interface (DDUI) . . . associated with a data source, such as the two-dimensional data source 300,” and Figure 4 illustrates the DDUI permitting “value data fields and the characteristic data fields . . . to be dragged and dropped into drop zones.” Id. at 35–36 (citing Ex. 1006, 7:10–13). Petitioner contends that a “primary benefit of the charting DDUI is that the user can quickly change the data that is being presented in the chart,” and using Couckuyt’s techniques, a user can “quickly change the data” and see the desired effects. Id. at 36 (citing Ex. 1006, 1:18–19; Ex. 1003 ¶ 228). Petitioner contends that when Becerra’s control panel includes multiple charts, Couckuyt’s techniques would allow dragging-anddropping data from a data source to multiple charts, and would simplify the process of assigning data to multiple control panel components. Id. at 36–37 skill in the art would have also had a reasonable expectation of success combining Becerra with Couckuyt because the combination would amount to nothing more than incorporating Couckuyt’s well-known drag-and-drop techniques into Becerra’s system. Id. at 37 (citing Ex. 1003 ¶¶ 229–231). Patent Owner responds that Couckuyt focuses on selecting a data icon that corresponds to dragging and dropping data fields, not dragging and dropping data, while Becerra teaches that selecting various data ranges from the spreadsheet is desirable. PO Resp. 36–37 (citing Ex. 1004 7:48–52; Ex. 2001 ¶ 146). According to Patent Owner, a person of ordinary skill in the art would not have been motivated to merely select data fields that do not limit the selected data in any way. Id. Patent Owner further argues Becerra’s method of binding components to a spreadsheet range and extracting formulas from a spreadsheet teaches away from the multiple chart generation scheme of Couckuyt that uses drag and dropping of data fields. Id. at 37. According to Patent Owner, Couckuyt is directed to the need for a charting DDUI that can generate multiple charts at the same time and such a need does not exist in Becerra which in turn is focused on creating a control panel that is an interactive graphics simulation. Id. (citing Ex. 1004, 1:66–67, 2:5–8; Ex. 1005 ¶ 11; Ex. 2001 ¶ 148). Based on our review of the complete record, we determine that” slip op. at 31
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“2. Whether QlikView Manuals Qualify as Prior Art Petitioner argues that “the QlikView Manuals describe a well-known system and are printed publications available to the public at least by July 8, 2008.” Pet. 7–9. Petitioner offers ample evidence to demonstrate the QlikView Manuals were publicly accessible by July 8, 2008. See id. (citing Ex. 1008; Ex. 1009; Ex. 1014–1023; Ex. 1003 ¶ 129–140; Ex. 1030;11 Ex. 1068 ¶¶ 4–7; Ex. 1032; Ex. 1033). Petitioner contends in 2008, QlikView was a well-known software product sold by QlikTech International AB (“QlikTech”). Id. at 8 (citing Ex. 1003 ¶ 129; Ex. 1030 ¶ 23; Ex. 1068 ¶¶ 4–7). Petitioner asserts that QlikTech announced that QlikView version 8.50 was scheduled for release on June 30, 2008, and QlikTech’s website added the “QlikView 8.50” hyperlink by July 8, 2008. Id. (citing Ex. 1003 ¶¶ 129–131; Ex. 1022, 1; Ex. 1068 ¶ 7). Petitioner contends that, as of July 8, 2008, a person of ordinary skill in the art would have understood that they could view the QlikView Manuals in the installation package. Id. (citing Exs. 1014–1017; Ex. 1003 ¶¶ 131–132; Ex. 1068 ¶ 7). Petitioner further contends that the QlikView Manuals were also available on QlikTech’s website as of this 11 As discussed below (see infra § IV.A), we grant Patent Owner’s Motion to Exclude as to certain portions of Exhibit 1030 and do not give them any weight. However, we deny Patent Owner’s Motion as to the remaining portions of Dr. Hall-Ellis’s testimony as well as Ms. Lofton’s testimony and various other exhibits proffered by Petitioner to show public accessibility of the QlikView manuals as of July 8, 2008. QlikView 8.50 was published on July 8, 2008. Id. at 8–9 (citing Exs. 1008, 1009, 1017, 1059, 1060; Ex. 1030 ¶¶ 29, 37). In its Patent Owner Response, Patent Owner does not contest that the QlikView Manuals were published and publicly available by July 8, 2008. PO Resp. 50 n.2 (noting only that Patent Owner intends to move to exclude evidence Petitioner relies on to establish the publication date for QlikView Manuals); Tr. 45:3–19. We are persuaded that Petitioner has shown by a preponderance of the evidence that the QlikView Manuals were publicly available as of July 8, 2008.12” slip op. at 50
Patent outcomesUS 8,271,892 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,271,892 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Maxell, Ltd.All claims unpatentablePTAB · Apr 27, 2026 · IPR2024-00906 · APJ Frederick C Laney · IPR · Final written decision
Claims 1, 4–6, and 8–27 are unpatentable as obvious; Judge Hudalla dissented as to claim 15.
RulingsFinal written decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedDecided for patent owner
“reachable through intuitive navigation from the homepage using the descriptive titles to the reference, is sufficient to demonstrate the BT-Spec was publicly accessible. See M&K Holdings, Inc. v. Samsung Electronics Co., 985 F.3d 1376, 1381 (Fed. Cir. 2021) (“The law regarding public accessibility is not as restrictive as M&K suggests—a website’s landing page is not required to have search functionality. Instead, given the prominence of JCT-VC, the dispositive question is whether interested users of the JCT-VC website could have located Park and Zhou through reasonable diligence.”). The Bluetooth SIG website itself functioned as a well-known, organized repository that a skilled artisan would naturally consult when researching Bluetooth technology. See id. at 1382 (“The Board found that the documents in question on the meeting pages of the JCT-VC website were effectively indexed by subject matter in light of the title-search functionality and the fact that Park and Zhou featured descriptive titles. That finding supports the Board’s conclusion that Park and Zhou were publicly accessible.”).” slip op. at 39
- ExcludeMotion to exclude, deniedDenied
“IV. PATENT OWNER’S MOTION TO EXCLUDE The party moving to exclude evidence bears the burden of proof to” slip op. at 139
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“12. Conclusion Based on the complete record, we find a preponderance of the” slip op. at 115
Patent outcomesUS 11,445,241 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,445,241 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Maxell, Ltd.All claims unpatentablePTAB · Apr 27, 2026 · IPR2024-00907 · APJ Frederick C Laney · IPR · Final written decision
Claims 1, 4, 5, 8–12, and 14–25 are unpatentable as obvious; the majority finds the asserted combinations persuasive despite 3GPP-Spec not qualifying as prior art.
RulingsFinal written decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable
“accessibility. A document hosted on the official standards body website, reachable through intuitive navigation from the homepage using the descriptive titles to the reference, is sufficient to demonstrate the BT-Spec was publicly accessible. See M&K Holdings, Inc. v. Samsung Electronics Co., 985 F.3d 1376, 1381 (Fed. Cir. 2021) (“The law regarding public accessibility is not as restrictive as M&K suggests—a website’s landing page is not required to have search functionality. Instead, given the prominence of JCT-VC, the dispositive question is whether interested users of the JCT-VC website could have located Park and Zhou through reasonable diligence.”). The Bluetooth SIG website itself functioned as a well-known, organized repository that a skilled artisan would naturally consult when researching Bluetooth technology. See id. at 1382 (“The Board found that the documents in question on the meeting pages of the JCT-VC website were effectively indexed by subject matter in light of the title-search functionality and the fact that Park and Zhou featured descriptive titles. That finding supports the Board’s conclusion that Park and Zhou were publicly accessible.”).” slip op. at 40
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006) (“[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” (alteration in original)). This search for answers about whether the claimed subject matter would have been obvious to a skilled artisan at the time of the invention applies “an expansive and flexible approach.” Id. at 415. Whether a patent claiming the combination of prior art elements would have been obvious is determined by whether the improvement is more than the predictable use of prior art elements according to their established functions. Id. at 417. Reaching this conclusion, however, requires more than a mere showing that the prior art includes separate references covering each separate limitation in a claim under examination. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). Rather, obviousness requires the additional showing that a person of ordinary skill at the time of the invention would have selected and combined those prior art elements in the normal course of research and development to yield the claimed invention. Id.” slip op. at 14
- ExcludeMotion to exclude, deniedDenied
“IV. PATENT OWNER’S MOTION TO EXCLUDE The party moving to exclude evidence bears the burden of proof to” slip op. at 158
Patent outcomesUS 10,129,590 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,129,590 - Reolink Innovation Inc. / Shenzhen Reolink Technology Co., Ltd. v. Throughtek Co., Ltd.All claims unpatentablePTAB · Jan 23, 2026 · IPR2024-01192 · APJ Michael J Strauss · IPR · Final written decision
Claims 1–10 and 16 are unpatentable as obvious over the asserted combinations of the Lorex Manual or Lorex Video with the identified references.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for petitioner
“Patent Owner does not dispute any of Petitioner’s contentions as to the effective filing date, stating in agreement with Petitioner’s asserted Effective Filing Date of the Challenged Claims that “[t]he ’916 Patent claims a priority of a provisional application 61/924,240 filed on January 7, 2014.” PO Resp. 8. Given that the parties are in agreement on the January 7, 2014, effective filing date, we similarly use January 7, 2014, as the effective filing date of the challenged claims for purposes of this Decision.” slip op. at 4
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Relying on the testimony of Vlad Kardashov, Petitioner proposes that a person of ordinary skill in the art at the time of the invention of the ’916 patent “would have had a bachelor’s degree in electrical engineering and two 7 US 2012/0198040 A1, published August 2, 2012 (Ex. 1011, “Kuo”). 8 The subject ’916 patent claims priority to Kuo as a continuation-in-part of that earlier filed application. Ex. 1001, code (63). 9 Lorex Technology Inc., “How to set up remote access for DVR using - Lorex Stratus Connectivity” (June 18, 2013), available at https://www. youtube.com/watch?v=fMPRi9WFuTM (Ex. 1012, the “Lorex Video”). 10 US 2012/0113265 A1, published May 10, 2012 (Ex. 1013, “Galvin”). years of work experience with network and communication technologies.” Pet. 8 (citing Ex. 1003 ¶¶ 12–14). Patent Owner does not contest Petitioner’s proposal or provide a proposal of its own. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is consistent with the technology described in the ’916 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that “no claim elements need a formal construction for purposes of resolving controversies in this proceeding.” Pet. 9 (citing Ex. 1003 ¶¶ 43–44; Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011), Google Inc. v. Intellectual Ventures II LLC, 701 Fed. Appx. 946, 956 (Fed. Cir. 2017)). Petitioner states “[a]ll claim terms should be construed according to the Phillips standard.” Id. (citing Phillips, 415 F.3d at 1303; 37 C.F.R. § 42.100). Patent Owner presents no proposed claim constructions. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPriority date awardedDecided for petitioner
“that Patent Owner fails to demonstrate that the Lorex Manual was based on a disclosure made by the inventor or joint inventor or by another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. The Lorex Manual is relied on under Ground 1A, exclusively or in the alternative to or in combination with Kim, for all claim elements. Pet. 9– 31. Patent Owner fails to demonstrate that this subject matter was disclosed to Lorex by ThroughTek, much less by one of the inventors of the ’916 Patent.” slip op. at 22
Patent outcomesUS 9,774,916 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,774,916 - PTAB · Dec 19, 2025 · IPR2025-01078 · APJ Robert L Kinder · IPR · Institution
The Board instituted IPR on claims 1, 2, 4–12, 14–22, and 24–30, finding a reasonable likelihood that Kido anticipates at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. at 2. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1011, 5:18–21. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’371 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner proposes “a person having at least a Bachelor’s Degree in electrical engineering, computer science, or computer engineering, or undergraduate training in an equivalent field and at least two years of relevant experience in electronic gaming technology.” Pet. 10 (citing Ex. 1003 ¶¶ 22–26). Petitioner further notes that “[a]dditional graduate education could substitute for professional experience, and significant work experience could substitute for formal education.” Id. Patent Owner does not dispute this level of skill. See Prelim. Resp. 13–14 (“Evolution does not set forth an alternative level of skill for a person of ordinary skill in the art”). For purposes of this Decision, we adopt Petitioner’s proposal, which comports with the teachings of the ’371 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “a first selected position . . . to have an increased payout . . . greater than a first non-selected payout.” See Pet. 25–27, 30, 35, 36. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a payout that does not receive the Prog bonus. Pet. 35–36 (“had the first selected position not been randomly selected, the player would only be eligible for the basic payout”). Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129.” slip op. at 14
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,756,371
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.