- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Recor Medical, Inc. / Otsuka Medical Devices Co., Ltd. v. Medtronic Ireland Manufacturing Unlimited Co.Some claims unpatentablePTAB · Nov 3, 2025 · IPR2022-00431 · APJ Eric C Jeschke · IPR · Remand
On remand, claims 1–3 and 8–12 are unpatentable over the instituted grounds; claim 4 was not shown unpatentable.
RulingsRemand decision- RemandOther
“Federal Circuit (Paper 33), which vacated the original Final Written Decision and remanded the proceeding to the Board. See ReCor Med., Inc. v. Medtronic Ir. Mfg. Unlimited Co., No. 2023-2251, 2025 WL 944511 (Fed. Cir. Mar. 27, 2025) (“the Appeal Decision” or “Appeal Dec.”); see also Paper 41 (copy of the Appeal Decision). The Federal Circuit’s mandate issued on May 5, 2025. See Paper 40. We have jurisdiction under 35 U.S.C. § 6, and we issue this Final Written Decision on Remand under 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. For the reasons below, on the complete record, we conclude that Petitioner has proven, by a preponderance of the evidence, the unpatentability of claims 1–3 and 8–12 of the challenged patent, and we conclude that Petitioner has not proven, by a preponderance of the evidence, the unpatentability of claim 4.” slip op. at 2
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedNot shown unpatentable
“and Petitioner’s rebuttal evidence. Objective evidence of nonobviousness, when present, must be considered as part of an obviousness inquiry. Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Notwithstanding what the teachings of the prior art would have suggested to one of ordinary skill in the art, the totality of the evidence submitted, including objective evidence of nonobviousness, may lead to a conclusion that one or more of the challenged claims would not have been obvious to one of ordinary skill in the art. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984).” slip op. at 50
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed
“1. Claims 1–3 and 8–11 Because the obviousness ground based on Levin and Acker is dispositive as to challenged claims 1–3 and 8–11, we need not reach this additional ground as to those claims. See SAS Inst. Inc. v. Iancu, 584 U.S. 357, 371 (2018) (holding that a petitioner “is entitled to a final written decision addressing all of the claims it has challenged”); Boston Sci. Scimed, analysis in the appeal to the Federal Circuit. See Appeal Dec. *1–*2 (summarizing grounds at issue on appeal and not discussing anticipation based on Acker). Inc. v. Cook Grp. Inc., 809 F. App’x 984, 990 (Fed. Cir. 2020) (nonprecedential) (stating that the “Board need not address issues that are not necessary to the resolution of the proceeding,” such as “alternative arguments with respect to claims [the Board] found unpatentable on other grounds”); SK Hynix Inc. v. Netlist, Inc., IPR2017-00692, Paper 25 at 40 (PTAB July 5, 2018) (determining all challenged claims to be unpatentable and not addressing additional grounds). 2. Dependent Claim 4 As to dependent claim 4, in the context of this ground, Petitioner relies on Acker as to the additional limitations in claim 4 in the same manner as relied on in the context of the ground based on Levin and Acker. See Pet. 73 (“The combination teaches this element for the same reasons described in [the obviousness ground based on Levin and Acker], claim 4, with the exception that [one of ordinary skill in the art] would have been motivated based on his or her knowledge of prior renal denervation work, as noted above.”). Thus, for the same reasons discussed above (see § II.C.3.c), we determine, based on the complete record, that Petitioner has not demonstrated by a preponderance of the evidence that claim 4 would have been obvious based on Acker and the knowledge of one of ordinary skill in the art. G. Asserted Obviousness of Claim 12 Based on Acker, the Knowledge of a Person of Ordinary Skill in the Art, and Yock Petitioner asserts that claim 12, which depends from independent claim 1, would have been obvious based on Acker, the knowledge of one of ordinary skill in the art, and Yock. Pet. 12, 75; Pet. Reply 35–36. Patent Owner provides arguments addressing this ground. PO Resp. 57–60; PO” slip op. at 75
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“1. Independent Claim 1 Petitioner contends that Acker discloses each limitation of claim 1. Pet. 61–63; Pet. Reply 35. In the “Overview of the Ground” section, Petitioner references its proposed construction of the phrase “configured to” and states that “it is proper to consider whether the prior art is ‘capable of’ performing the recited functions, as opposed to requiring that a designer of a prior art device have actually conceived of the recited functional language.” Pet. 61. Petitioner continues: “If the PTAB agrees that this is the proper approach to claim construction, then Acker also anticipates the claims challenged in this ground.” Id. For the reasons below, we determine, based on the complete record, that Petitioner has not demonstrated by a preponderance of the evidence that claim 1 is anticipated by Acker. As to element 1d, which includes the phrase “configured to,”16 Petitioner states that Acker is capable of being used to target renal neural fibers outside of the blood vessel to thermally induce modulation of target neural fibers while protecting non-target tissue in the blood vessel wall from thermal injury for the reasons discussed under claim 1, limitation [1d] and in the section entitled “Reasonable Expectation of Success”, beginning on page 37 [of the Petition]. Pet. 62–63 (citing Daft Pet. Decl. ¶ 179) (first bracketed text added by Petitioner). Patent Owner argues that, in the context of this asserted ground based” slip op. at 71
Patent outcomesUS 8,845,629 mixed§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,845,629 - PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution
Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,745,847 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - The Boeing Company v. The Regents Of The University Of CaliforniaNo claims unpatentablePTAB · Oct 2, 2025 · IPR2024-00761 · APJ Alyssa A Finamore · IPR · Final written decision
The Board held claims 1–24 not unpatentable because the asserted references did not show the glass element propagating a modified stress wave to generate tensile stress at the interface.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the time of the invention of the ’684 patent “would have had an M.S. in Mechanical Engineering or a related field, and at least five years of experience using laser systems to characterize and test mechanical behavior in materials” and that “[m]ore education may supplement practical experience or vice versa.” Pet. 5 (citing Ex. 1003 ¶ 38). Patent Owner” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Decided for patent owner
“Both parties maintain that no claim term needs to be construed. Pet. 4 (citing Ex. 1003 ¶ 40); PO Resp. 20. Patent Owner, however, provides an express construction for limitation [1.d] of independent claim 1 and the similar limitation of independent claim 13, namely limitation [13.c]. PO Resp. 20 (citing Ex. 2011 ¶ 25). To resolve the controversy before us, we determine that these limitations require express construction. 1. “the glass element is configured to propagate and modify a stress wave to the coating/substrate interface to generate a tensile stress between the substrate and the coating” (limitation [1.d]) and “propagating and modifying a stress wave through the glass element to the coating/substrate interface to generate a tensile force between the substrate and the coating” (limitation [13.c]) Patent Owner argues these limitations mean “changing the profile of the laser generated compressive wave and propagating the wave profile as modified to the free surface of the coating, which upon reflection from the free surface as a tension wave generates a tensile stress at the coating/substrate interface.” PO Resp. 20 (citing Ex. 2011 ¶ 25). Petitioner does not refute this proposed construction and, during the oral argument, Petitioner confirmed it agrees with the proposed construction. Tr. 8:16–9:12. We so no reason to depart from the parties agreed-upon construction of limitations [1.d] and [13.c]. Accordingly, for purposes of this Final Written Decision, we adopt the parties’ construction of limitations [1.d] and [13.c].” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“a shock in the compression wave in the fused silica substrate. Even if we were to agree with Petitioner that Wang-Dissertation’s fused silica substrate modifies the compression waveform, we would not be persuaded that the fused silica substrate propagates the modified wave to the free surface of the coating, which upon reflection from the free surface as a tension wave generates a tensile stress at the coating/substrate interface, as limitation [1.d] requires. In view of the presence of tension-wave-1 in Wang-Dissertation’s experiments, we find Petitioner has not demonstrated persuasively that the fused silica substrate propagates a modified stress wave to the free surface of the coating to generate a tensile stress at the coating/substrate interface. Also, we find credible Dr. Gupta’s unrebutted testimony that any modified compression wave would attenuate in the substrate and not propagate to the free surface coating or generate a tensile stress at the coating/substrate interface. Ex. 2011 ¶¶ 93–98. Petitioner does not dispute that the experiments in Wang-Dissertation include tension-wave-1. See Ex. 1005, 65 (“The experimental picture is complicated somewhat by the presence of a tensile wave, reflected from the back of the confining layer.”). Nor does Petitioner dispute that Wang-Dissertation discloses that the tension-wave-1 propagates faster than the compression-wave-1 and eventually overtakes compression-wave-1. See id. at 65–66 (“Being tensile, it propagates faster that the peak compressive stress, and faster than the low stress tail of the main pulse. It eventually overtakes the compressive pulse and linear dissipative mechanisms govern the final thickness of the shock.”). Rather, Petitioner relies on Dr. Wang’s testimony regarding the timing of the waves through the sample and argues that tension-wave-1 does not overtake compression-wave-1 in the fused silica substrate. Pet. Reply 17 (citing Ex. 1038 ¶ 5). Dr. Wang testifies that the peak stress from tension-wave-1 is about 2 ns behind the peak of compression-wave-1 and will not reach the interface before the reflected tensile peak of compression-wave-1 reaches the interface in 0.3 ns. Ex. 1038 ¶ 5. However, as Dr. Gupta persuasively explains, the delay between tension-wave-1 and compression-wave-1 depends on the properties of the confining layer, and Wang-Dissertation acknowledges that these properties are not well controlled. Ex. 2011 ¶ 54; see also Ex. 1005, 65 (“The surface properties of that confining layer are not well controlled.”).” slip op. at 19
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“claimed subject matter. Pet. 35–38; Pet. Reply 23–24. In doing so, Petitioner continues to rely on Wang-Dissertation to disclose limitation [1.d] of independent claim 1 and limitation [13.c] of independent claim 13. Pet. 35–38; Pet. Reply 23–24. Petitioner does not put forth any further obviousness rationale in this ground based on Wang-Dissertation for teaching these limitations. For the same reasons discussed in sections II.C.2–3, Petitioner has not persuaded us that Wang-Dissertation teaches or suggests limitations [1.d] and [13.c]. Thus, Petitioner has not shown, by a preponderance of the evidence, that Wang-Dissertation renders obvious the subject matter set forth in claims 4, 6, 9, 15, 17, 20, 23, and 24, which depend from independent claims 1 and 13.” slip op. at 24
Patent outcomesUS 7,487,684 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 7,487,684 - Air Products And Chemicals, Inc. v. Evonik Operations GmbH And Evonik CorporationNo claims unpatentablePTAB · Aug 18, 2025 · IPR2024-00611 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 1–23 were not shown unpatentable: the Ungerank Patent was not established as prior art, and Scholz did not establish the claimed recycle range or motivation to modify its systems.
RulingsFinal written decision- BurdenNot shown unpatentable
“In an inter partes review, the burden of persuasion is on the petitioner to prove ‘unpatentability by a preponderance of the evidence,’ . . . and that burden never shifts to the patentee.” Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (quoting 35 U.S.C. § 316(e)). Here, Petitioner asserts that (1) the combined teachings of the Ungerank Patent and Scholz disclose or suggest all of the limitations of claims 1–5, 7, 9, and 11–23 of the ’380 patent, and (2) the Ungerank Patent qualifies as prior art because the portions cited in the Corrected Petition and the Baker Declaration were published in the Ungerank Application.7 slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artDecided for patent owner
“Petitioner ultimately has the burden of persuasion, based on all the evidence, on both these assertions. See Dynamic Drinkware, 800 F.3d at 1378. After reviewing the parties’ arguments and the evidence of record, we are not persuaded that Petitioner establishes, by a preponderance of the evidence, that the portions of the Ungerank Patent relied on in the Corrected Petition and the Baker Declaration qualify as prior art. There is nothing in the Initial Petition or the exhibits filed in support thereof that indicates Petitioner’s intention to rely on the Ungerank Application as prior art in this proceeding. The Initial Petition defines “Ungerank” as the Ungerank Patent, and all citations to “Ungerank” in support of Petitioner’s allegations are to the Ungerank Patent. Initial Pet. 3, 12–14, 17–42. The Initial Petition does not refer to the Ungerank Application, and the Ungerank Application was not submitted as an exhibit with the Initial Petition. Id. at iii–v (Exhibit List). And Petitioner’s expert declarant, Dr. Baker, did not consider the Ungerank Application when formulating his opinions in support of the Initial Petition. Ex. 1003 ¶ 51 (identifying materials considered). Although the Corrected Petition redefines “Ungerank” as the Ungerank Application, the Corrected Petition retains its citations to the Ungerank Patent.8 Corrected Pet. 3, 12–15, 18–43. In that regard, Petitioner generally asserts that the Ungerank Application’s “specification and figures 8 At the hearing, Petitioner’s counsel stated that they left the citations to the Ungerank Patent in the Corrected Petition because they “didn’t want to make tons and tons of changes,” and the Ungerank Patent citations “are much more specific.” Tr. 12:10–13; see also Pet. Reply 10 (“Moreover, by citing AP-1006’s column and line numbers instead of AP-1038’s paragraph numbers, Petitioner provided more specific citations in support of its arguments.”). are identical to the” Ungerank Patent, but does not direct us to where the specific portions of the Ungerank Patent that it asserts to be prior art can be found in the Ungerank Application. See id. at 3. We are also not directed to any evidence in the record that indicates that Dr. Baker compared the portions of the Ungerank Patent on which he relies to the disclosures in the Ungerank Application, or even considered the Ungerank Application at all. See Ex. 1003 ¶ 51; Ex. 1041 ¶ 4; Ex. 2009, 44:10–45:18; Ex. 2018, 12:18– 23. We decline to perform an analysis that is missing from the Corrected Petition and Dr. Baker’s testimony. See United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”); DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”). Accordingly, Petitioner does not establish, by a preponderance of the evidence, that the cited portions of the Ungerank Patent were published in the Ungerank Application.” slip op. at 17
- Strike new argumentNew argument disregardedDecided for patent owner
“Our rules provide that a petitioner must include “[a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence including material facts, and the governing laws, rules, and precedent.” 37 C.F.R. § 42.22(a). Our rules also state that “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” Id. § 42.23(b). “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” CTPG 74. Our Trial Practice Guide explains that “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g., to make out a prima facie case of unpatentability.” Id. at 73; see also id. at 74 (“Examples of indications that a new issue has been raised in a reply include new evidence necessary to make out a prima facie case for the patentability or unpatentability of an original or proposed substitute claim, such as newly raised rationale to combine the prior art references that was not expressed in the petition.”). In the Reply, Petitioner argues that “POSITAs ‘might have already figured out’” that, in Comparative Example 1, the surface area of the membrane in stage 2 was larger than that of the membrane is stage 1, and Scholz’s Figure 7 systems with larger stage 2 membrane areas than stage 1 were “consistent with POSITAs’ likely intuition about [Comparative Example 1’s] stage 2 and stage 1 areas.” Pet. Reply 19. As Petitioner concedes, this “an additional reason POSITAs would have found it appropriate to look to Scholz’s Figure 7 to better understand [Comparative Example 1’s] relative surface areas.” Id. (citing Ex. 1041 ¶¶ 31–32) (emphasis added). The case presented in the Corrected Petition is that a POSITA would have looked to Scholz because Comparative Example 1 does not provide details on the area of the membranes or their ratios. Corrected Pet. 18–19. Petitioner’s admitted “additional reason” to combine the Ungerank Patent and Scholz in the Reply is a newly raised rationale to combine the prior art references necessary to make out a prima facie case of unpatentability. See CTPG 74. Accordingly, Petitioner’s untimely new argument is waived, and we do not consider it here.” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Having considered the complete trial record, we determine that Petitioner fails to sufficiently demonstrate that the combination of the Ungerank Patent and Scholz teaches limitation [1.f.ii] because Petitioner fails to establish by a preponderance of the evidence that a POSITA would have been motivated to look to the relative sizes of the membranes in the stages of Scholz’s Figure 7 to determine the relative sizes of the membranes in the stages of Comparative Example 1.” slip op. at 21
Patent outcomesUS 10,471,380 not shown unpatentable§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 10,471,380 - PTAB · Jun 26, 2025 · IPR2024-00294 · APJ David Cotta · IPR · Final written decision
Claims 1–20 are unpatentable; proposed substitute claims 21–24 are also unpatentable, so the contingent motion to amend is denied.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“appear to be that Patent Owner specifies that the POSA’s knowledge and experience may include optical sensors and that the POSA may have a degree emphasizing software. We do not deem these differences material, particularly because the optical sensors and technologies at issue are those used in physiological monitoring technologies and both parties agree that the POSA would have a working knowledge of physiological monitoring technologies. Ex. 1003 ¶ 24; PO Resp. 11. We find the additional specificity of Patent Owner’s definition to be helpful. In addition, Patent Owner’s definition appears to be consistent with the level of skill in the art reflected in the prior art of record and the disclosure of the ’507 patent. Accordingly, we adopt Patent Owner’s proposed definition of the person of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art. (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). We note that we would reach the same outcome under either definition of the POSA. Cf., PO Resp. 12 (asserting that Petitioner’s proposed definition is “flawed” but also asserting that “patentability is confirmed” “[r]egardless of the level of skill”).” slip op. at 14
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Ex. 1007, 1528. The dispute between the parties focuses on whether D’Angelo was made available to attendees of the IEEE EMBS conference identified in this header and, if so, what effect that has.16 Accordingly, we begin our analysis by considering the conference.” slip op. at 42
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“understood Mendelson to disclose averaging signals. We do not find in Mendelson any discussion of summing or averaging signals. See generally Ex. 1011, 912–915. Our inability to find a teaching of averaging in Mendelson is consistent with the testimony of Drs. Kenny and Duckworth. Dr. Kenny testifies that “there is simply no disclosure in Mendelson itself of any summing or averaging of collected signals.” Ex. 1083 ¶ 23. And in his deposition, Dr. Duckworth was unable to identify any express disclosure of averaging in Mendelson. See Ex. 1087, 103:9–114:11 (confirming that certain aspects of his declaration testimony relating to averaging of signals are not discussed in Mendelson). Accordingly, Mendelson, standing alone, does not support that the POSA would have understood Mendelson’s Sensor Module to have output averaged signals” slip op. at 28
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“the PDA to read out ‘data that’s been stored’ (i.e., previously measured physiological data) even after the Receiver Module’s battery had died” because Mendelson’s Receiver Module lacks “a microSD card or other nonvolatile storage from which measured data could be ‘read out’ after its battery has died.” PO Resp. 37; see also Ex. 2037 ¶ 147 (testimony of Dr. Duckworth confirming that Mendelson’s system could not store data that could be read out after its battery died). Accordingly, Patent Owner argues the POSA “would not have been motivated to modify Mendelson’s Receiver Module to draw power from the PDA as proposed because doing so would not allow the PDA to ‘read out’ the previously ‘measured physiological data’ after the Receiver Module’s battery died.” PO Resp. 39.” slip op. at 60
§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,736,507
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.