- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Medivis, Inc. v. Novarad Corp.Some claims unpatentablePTAB · Oct 1, 2026 · IPR2023-00042 · APJ Scott Raevsky · IPR · Remand
Claims 1–6, 11, and 20 are unpatentable as obvious over Doo and Amira; claims 12–19 were not shown unpatentable because the asserted tissue properties were not shown in Amira.
RulingsRemand decision- RemandOther
“Federal Circuit. The court issued its decision in Medivis, Inc. v. Novarad Corp., No. 2024-1794, 2026 WL 587294 (Fed. Cir. Mar. 3, 2026) (“Medivis”) (Paper 40),1 affirming-in-part, reversing-in-part, and remanding our Final Written Decision (Paper 35) for further proceedings. In its opinion, the Federal Circuit reversed our “determination of no motivation to combine Doo and Amira” and remanded for further proceedings to evaluate whether claims 1–6 and 11–20 (“the Remanded Claims”) of U.S. Patent No. 11,004,271 B2 (“the ’271 patent,” Ex. 1001) are unpatentable in view of Petitioner’s obviousness challenge over Doo and Amira. Medivis, slip op. at 9–10. We have jurisdiction under 35 U.S.C. § 6(b). We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Medivis, Inc. (“Petitioner”) and Novarad Corp. (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Medivis, we hold that Petitioner has demonstrated, by a preponderance of the evidence, that claims 1–6, 11, and 20 are unpatentable; however, Petitioner has not demonstrated, by a preponderance of the evidence, that claims 12–19 are unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We adopt Petitioner’s proposed level of skill, except that we excise part of Petitioner’s definition to produce the following modified version: 4 Throughout this decision, we eliminate the parties’ italicization of reference names from quotations without noting “emphasis omitted.” 5 Doo, WO 2015/164402 A1, published October 29, 2015 (Ex. 1008). 6 Excerpt of Amira 5 User’s Guide, title through Chapter 2 (Visual Imaging 2009) (Ex. 1005). engineering, or a related field with several years of experience in the design, development, and study of augmented reality devices and . . . familiarity with conventional medical imaging data and visualization of data for medical procedures . . . . Our edit removes the alternative of “working with a team including someone with such familiarity” because one’s role in a team may be tangential to their personal experience with medical imaging. Regardless, had we adopted Petitioner’s original definition, our decision would not have changed.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We agree with Petitioner that the term “3D slices” has no apparent connection to the phrase “direct volume rendering.” Patent Owner’s argument appears to be that DVR “requires an image of the entire anatomical volume that is neither feature-specific nor segmented, [which] would seemingly require that all inner layers be displayed.” Reply 4; see Sur-reply 6–10 (not disputing Petitioner’s characterization). But, as Petitioner notes, the specification directly undermines this by teaching “display [of] a slice of the 3D data instead of a volume of the 3D data.” See Reply 4 n.2 (quoting Ex. 1001, 5:34–35). In other words, to the extent DVR would depict an image of the entire anatomical volume, displaying 3D slices “instead of a volume of the 3D data” implies the opposite of DVR. Even if “3D slices” somehow implied DVR, Patent Owner’s position is still untenable. Claim 1 does not recite “3D slices.” Instead, claim 1 recites “3D data” and “inner layers.” Ex. 1001, 18:54–65. Patent Owner fails to clarify the relationship between “slices,” “3D data,” and “layers,” and its expert even admits that slices and layers are two different things. See PO Resp. 13; Ex. 1022, 32:7–16 (agreeing that the words “slice” and “layer” are not “synonyms”), cited in Reply 4. We also agree with Petitioner that dependent claim 3 distinguishes slices and layers by reciting “slices of the projected inner layer.” Reply 4 (quoting Ex. 1001, 19:3–10). Thus, even if 3D slices somehow implied DVR, the language of claim 1 does not support limiting the claim this way.” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“The determination of whether a document was publicly accessible “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). For instance, courts routinely rely on the Wayback Machine to determine when a reference was first made available to the public. Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021) (“District courts have taken judicial notice of the contents of webpages available through the Wayback Machine ‘as facts that can be accurately and readily determined from sources whose accuracy cannot reasonably be questioned.’”). We disagree with Patent Owner’s argument that “Medivis cannot rely on additional prior art”—Exhibits 1023 and 1024—“that was submitted after its Petition to carry its burden without leave from the Board.” Sur-reply 4. As Patent Owner did not file a motion to exclude these exhibits, we decline Patent Owner’s invitation to disregard them. We also find Petitioner’s Reply argument proper because it directly responds to Patent Owner’s contention that Petitioner did not prove the public accessibility of Amira. See Chamberlain Grp., Inc. v. One World Techs., Inc., 944 F.3d, 919, 925 on issues previously raised.”). Petitioner’s Reply argument appropriately elaborates on the Petition’s contention that Amira was publicly accessible. Patent Owner also does not dispute the substance of Petitioner’s evidence. For example, Patent Owner does not address the substance of Mr. Frank-White’s declaration. We find that this evidence, including Mr. Frank- White’s declaration testimony, persuasively supports the public availability of Amira as of the date shown in the Wayback Machine URL. See Ex. 1024.” slip op. at 22
Patent outcomesUS 11,004,271 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,004,271 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution
Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,745,847 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Valve Corporation v. Immersion CorporationAll claims unpatentablePTAB · Jun 12, 2025 · IPR2024-00477 · APJ Scott Raevsky · IPR · Final written decision
Claims 1–7 are unpatentable as anticipated by and obvious over Komata; the Board did not reach the Tsuji or Rosenberg grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner contends that a POSITA would have had a bachelor’s degree in electrical engineering or computer science (or an equivalent degree), and two years of practical or industry experience in the field of human computer interaction (HCI), including implementation of computer-based systems and software for providing haptic feedback effects to a user. . . . Also, a person could have qualified as a [POSITA] with more formal education and less practical or industry experience, or vice versa. PO Resp. 17–18 (citing Ex. 2008 ¶ 17). Although these level of skill definitions are not the same, the differences are minor, and Patent Owner does not argue that its level of skill definition is dispositive. To the contrary, Patent Owner asserts that “[i]n any event, the challenged claims of the ’260 Patent are patentable under either . . . definition.” Id. at 18. We apply Petitioner’s level of skill but would have reached the same result had we applied Patent Owner’s.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“As we explained in our Institution Decision, we disagreed then, and still disagree, “that the second pressure must be detected after the first pressure is detected (or that the third pressure must be detected after the first pressure is detected) simply because the second pressure is greater than the first pressure (and the third pressure is greater than the second pressure).” Dec. 27. As we explained there, “[t]he claimed relative magnitudes of the first, second, and third pressures do not define any temporal relationships regarding the detection of the pressures.” Id. We agree with Petitioner that claim 1 recites quantitative relationships for the pressures, not temporal relationships. Reply 4. For example, claim 1 requires “the second pressure greater than the first pressure” but says nothing about when the second pressure must be greater than the first pressure. A key misconception undergirding Patent Owner’s argument is its statement that “a ‘first pressure’ must first exist before the invention can detect that the ‘second pressure’ is greater.” PO Resp. 27 (emphasis added). The claim does not require detecting that the second pressure is greater than the first pressure. Limitation [1c] simply says, “detect a second pressure on the first input device, the second pressure greater than the first pressure.” In other words, all the detection that this limitation requires is detecting a second pressure. The claim then observes that the second pressure is greater than the first pressure but does not require detecting this. Limitation [1e] similarly detects pressure but not the comparison: “detect a third pressure on the first input device, the third pressure greater than the second pressure.” Thus, it does not follow that “a ‘first pressure’ must first exist before the invention can detect that the ‘second pressure’ is greater.” See id. Accordingly, we determine that Patent Owner’s analysis of the claim language is unpersuasive.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Our decision here does not depend on the meaning of this term. Patent Owner only argues the phrase “tactile sensation” for Petitioner’s challenge over Rosenberg, which we do not reach because Petitioner’s challenge over Komata is dispositive. See PO Resp. 63–66. Accordingly, we do not construe this term.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“that Komata discloses all the limitations of claim 1. Patent Owner does not dispute that Komata discloses all the limitations of claim 1. Instead, Patent Owner disputes that Komata discloses the order of all the steps of claim 1, based on its construction requiring the steps to be performed in order. PO Resp. 50–54; Reply 17 (observing that Patent Owner “does not dispute that Ground 1 demonstrates how Komata anticipates or renders obvious claims 1–7 if [Patent Owner’s] ordered-steps argument is rejected”); Sur-reply 12–14 (not disputing the Reply’s observation). As Patent Owner’s argument relies on a claim construction we have not adopted, Patent Owner fails to undermine Petitioner’s persuasive showing.7 To the extent, as we note above, that the claims may require a partial ordering (i.e., limitation [1a] preceding limitation [1b] and limitation [1c] preceding limitation [1d], see supra Section I.A.1.a), Petitioner has persuasively shown that Komata discloses such ordering. a. Summary as to Claim 1 For the above reasons, Petitioner has shown by a preponderance of the evidence that claim 1 is anticipated by and would have been obvious over Komata. 3. Dependent Claims 2–7 Petitioner also contends that claims 2–7 would have been obvious over Komata. Pet. 28–35. Patent Owner does not dispute these dependent claims. Petitioner provides detailed explanations indicating where Komata teaches or suggests the limitations of claims 2–7, supported by Mr. Ward’s testimony. Id. We determine that Petitioner has shown by a preponderance of the evidence that claims 2–7 are anticipated by and would have been obvious over Komata.” slip op. at 17
Patent outcomesUS 7,336,260 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 7,336,260 - Valve Corporation v. Immersion CorporationAll claims unpatentablePTAB · Jun 12, 2025 · IPR2024-00478 · APJ Scott Raevsky · IPR · Final written decision
Claims 1–19 are unpatentable because Petitioner proved that Rosenberg I anticipates them.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have a bachelor’s degree in electrical engineering, computer science, or a related field, plus at least two years of industry or graduate level experience with software engineering, haptics programming, and/or human-computer interaction, including experience with user-interfaces and applications involving touchscreens, touchpads, and related technologies.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“feedback that simulates a mechanical detent.” PO Resp. 28; Sur-reply 3. Petitioner “does not explicitly disagree” that a virtual detent is “vibrotactile feedback that simulates a mechanical detent.” Reply 2. Petitioner asserts that “[i]f there is a dispute, it is whether Rosenberg I’s vibrotactile feedback ‘simulates a mechanical detent’ because [Patent Owner] says such simulation requires a sense of mechanical resistance and Rosenberg I allegedly lacks such simulated resistance.” Id. (citing PO Resp. 58–59).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“To the extent Patent Owner urges us to require virtual detents to vary on a system or application basis, we do not find this interpretation required by the claims or specification either. Although the claims refer to “a plurality of systems,” they do not recite different detent profiles for each of those systems. Claim 1, for example, recites “receiving a detent profile associated with one of the systems.” The other claims are similar. Patent Owner’s reliance on non-limiting specification language is also unavailing. E.g., Ex. 1001, 8:38–46 (“can” and “may”), 4:30–44 (“embodiment” and “may”).” slip op. at 13
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble not limitingDecided for petitioner
“supports its proposed construction. See PO Resp. 32. Patent Owner argues that claim 15 recites a “system comprising” “an input device configured to control one of a plurality of systems,” and hence “the recited plurality of systems are subsystems in addition to the containing system.” Id. We question how this point supports Patent Owner’s proposal because this does not address why each system must “provide[] context for virtual detents.” But regardless, we find it unpersuasive because claim 15’s preamble is not limiting (merely reciting “A system comprising”). See Summit 6, LLC v. Samsung Elecs. Co., 802 F.3d 1283, 1292 (Fed. Cir. 2015) (“[P]reamble language that merely states the purpose or intended use of an invention is generally not treated as limiting the scope of the claim.”); see also Tr. 80:4– 8 (Patent Owner conceding that the preamble is non-limiting). Nor is there any explicit language in claim 15 that would exclude any particular system, such as the system recited in the preamble, from the recited “plurality of systems.”” slip op. at 9
Patent outcomesUS 9,430,042 unpatentableClaim construction§ 102 anticipationPatents in suitUS 9,430,042 - Inductev, Inc. v. Witricity CorporationSome claims unpatentablePTAB · May 16, 2025 · IPR2024-00140 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1, 7–10, 12–16, 18, and 19 are unpatentable over the stated grounds; claims 4–6 were not shown unpatentable because the proposed multi-coil alignment lacked prior-art support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art “would have had . . . a bachelor’s degree in electrical engineering, microelectronics, or equivalent and . . . two to three years of industry or research experience in the field of wireless energy transfer,” and that “a higher level of education or skill might make up for less experience, and vice-versa.” Pet. 6 (citing Ex. 1003 ¶¶ 39–44). Patent Owner does not contest this. See PO Resp. Petitioner’s proposed articulation is supported by testimonial evidence and appears to be consistent with the types of problems and solutions in the ’654 patent. See Ex. 1001, 1:15–28. We adopt it for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We agree with Petitioner that the evidence does not suggest (and Patent Owner does not explicitly argue) that the terms “transmitting antenna” and “receiving” antenna depart from the ordinary and customary meanings of those terms. Pet. 1–2. However, for the reasons discussed below, the outcome of our decision would be the same whether we adopted Petitioner’s or Patent Owner’s proposed construction. Thus, we need not adopt either party’s proposed construction for this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for patent owner
“spaced configuration are not confined to ferrite cores 32 and 3, and that at least a component of the flux lines will escape the cores. See Ex. 1032 ¶¶ 48–52; Ex. 1038 ¶ 54 Fig. 2. Indeed, the evidence suggests (and Dr. Horenstein acknowledges in his first declaration) that at least a component of flux will escape the core of even a traditional transformer. See Ex. 1032 ¶¶ 45–47; Ex. 1044, 6; Ex. 2001 ¶ 27. In his second declaration, Dr. Horenstein provides contrary testimony that in Odachi’s open configuration during alignment, cores 32 and 3 “act to confine or guide the magnetic flux lines, rather than radiate them into free space,” and “the flux lines would [not] leave the gap area and enter into the space distal to the magnetic circuit.” Ex. 2010 ¶ 69. But in view of Dr. Horenstein’s contrary position in his first declaration, and the lack of supporting evidence in his second, we do not find it credible. 37 C.F.R. § 42.65(a) (2022) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Apple Inc. v. MPH Techs. Oy, 28 F.4th 254 (Fed. Cir. 2022).” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“(4) Analysis We are persuaded by Petitioner’s argument that during the alignment process in Odachi corresponding to claim 13, there is a “spaced distance between the primary inductive coupler [230] and the secondary inductive receptacle 2” which is “reduced gradually and electromagnetic induction occurs between the coupler to the receptacle when the former coupler comes close to the latter receptacle.” Ex. 1005, 6:1–6. Thus, prior to any contact or precise alignment between the two cores, “an electromotive force is induced in the secondary coil 4 and this induced force is increased with the decrease in the spaced distance.” Id. at 6:6–8. At least in that spaced configuration, the evidence of record suggests that primary coil 31 produces a near-field component of flux into free space (the air space between the coils where there is no intervening core material) that is intercepted by secondary coil 4 to effect resonant inductive coupling, and that secondary coil 4 intercepts and receives the near-field component of flux in free space that is generated by primary coil 31 to effect resonant inductive coupling. See Ex. 1032 ¶¶ 48–52, 55. Thus, we find that Odachi discloses a “transmitting antenna” (coil 31) and a “receiving antenna” (coil 4) under Patent Owner’s proposed construction. We would reach the same finding under Petitioner’s proposed broader construction because the evidence suggests that Odachi’s coils 31 and 4 would have been considered “antennas” under the parties’ uncontested definition of that term, which is “a device that radiates and/or receives radio waves.” See id. ¶¶ 43–47, 53–54; Ex. 1032 ¶ 15 (Dr. Allen agreeing with this definition of “antenna”); Ex. 2001 ¶ 25 (Dr. Horenstein agreeing with this definition of “antenna”)). In addition, Petitioner persuasively shows that the free space between Odachi’s coils in the spaced configuration includes the “near-field region,” which includes the induction field around primary coil 31. See Ex. 2006, 498; Ex. 1045, 5:4–7; Ex. 1032 ¶¶ 53–54). Dr. Horenstein’s testimony does not contradict this. Although he points out that there are separate terms for inductive, near, and far fields, he also acknowledges that “[t]he region of space closer to the antenna than the far field is the near-field region.” Ex. 2010 ¶ 37 (citing Ex. 2006, 275).8” slip op. at 22
Patent outcomesUS 8,466,654 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,466,654
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.