• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Cambridge Industries USA, Inc. / Accelight Technologies, Inc. v. Applied Optoelectronics, Inc.No claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-01570 · APJ Monica S Ullagaddi · IPR · Final written decision

  The majority held claims 1–19 not shown unpatentable: Wang did not anticipate claims 1–10, and Wang with Xiong did not render claims 11–19 obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent is self-explanatory and would have been recognized by a [person of ordinary skill in the art] as having plain and ordinary meanings.” Pet. 10. “Petitioner submits that no special constructions are required” because “the claim terms appear understandable in the context of the disclosure provided by the specification of the ’690 Patent.” Id. (citing Ex. 1003 ¶ 58). Patent Owner “agrees that the claim terms should be given their plain and ordinary meaning as understood by a [person of ordinary skill in the art].” PO Resp. 10. After reviewing the arguments and evidence before us, we determine that we do not need to expressly construe any claim term to resolve any controversy in the proceeding. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • BurdenNot shown unpatentable

    “Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner sufficiently establishes that claim 1 is unpatentable under 35 U.S.C. § 102 as anticipated by Wang by a preponderance of the evidence.” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12

  Patent outcomesUS 10,788,690 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,788,690
• Cambridge Industries USA, Inc. / Accelight Technologies, Inc. v. Applied Optoelectronics, Inc.No claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00437 · APJ Monica S Ullagaddi · IPR · Final written decision

  The majority held claims 1–19 not unpatentable: Wang did not establish anticipation of claims 1–10, and Wang with Xiong did not establish obviousness of claims 11–19.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “challenge set forth in the Petition by citing the background of the ’690 patent and Dr. Willner’s deposition testimony and characterizing the same as “admissions” of Patent Owner in Petitioner’s Reply, such “evidence” did not form the basis of Appellant’s original position set forth in the Petition.6 Petitioner’s arguments that all of the components recited in claim 11 “were known in the prior art” or that Dr. Willner admitted the same are unpersuasive at least because the Petition did not set forth this position. Contrary to Petitioner’s arguments during the oral hearing, the Petition does not present challenges based on “Applicant Admitted Prior Art.” See generally Pet.” slip op. at 23

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  Patent outcomesUS 10,788,690 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,788,690
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01222 · APJ Garth D Baer · IPR · Final written decision

  Claims 34–37 and 40–46 are unpatentable as obvious over the Yamazaki-based and Weaver-based grounds.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

    “Patent Owner bears the burden of production to establish that its claimed invention is entitled to an earlier priority date for this fact-intensive issue. See In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1375–76 (Fed. Cir. 2016). We agree with Petitioner that the email chain does not support Patent Owner’s conception claim because it “does not discuss depositing a planarization layer, as required by both independent claims.” Pet. Reply 3. Patent Owner asserts that the inventor’s discussion of “PML” (polymer multi-layer) encapsulation in the email chain shows their conception of the claimed planarization layer because the ’389 patent describes that PMLs “‘[t]ypically’ include[e] ‘a planarization layer’ that ‘is provided to give a planar surface’ for deposition of an upper layer,” and “‘address ‘any point defects (i.e. pin holes)’ that might appear in the barrier layer’s surface.” PO Resp. 6 (quoting Ex. 1001, 1:31–37, 1:41–44, 1:56–62). We disagree with Patent Owner for two reasons. First, the challenged patent’s specification does not corroborate that the inventors conceived the claimed planarization before the challenged patent’s priority because it did not exist at the time of the email. Whether the inventors, at the time of filing, considered PMLs to typically include a planarization layer as of the claimed priority date does not support the allegation that they conceived of that same planarization layer more than a year earlier. Moreover, the ’389 patent’s teaching that “[t]ypically, for PML structures, a planarization layer 106 is formed” (Ex. 1001, 1:30–31) shows that the inventors recognized PML structures and planarization layers were distinct because only a subset of PML structures formed planarization layers, even if they do so typically. Thus, the inventor’s discussion of a PML layer in the email chain does not evidence their conception of the claimed planarization layer, as Patent Owner contends. Additionally, even if we were to understand the inventors’ mention of PML encapsulation in the emails, together with the discussion of patterning techniques for an organic layer, as discussing a planarization layer, such discussions are evidence of brainstorming ideas, rather than documenting the path taken with the claimed invention. For instance, the inventors use phrases like “don’t know if this will work,” “these are all just ‘undeveloped’ ideas,” and “looking forward to keep this discussion rolling.” Ex. 2006, 1; see also Ex. 1034, 59:22−59:18. As Petitioner argues, and we agree, these are more theoretical and future-development discussions than an exchange of a definite idea. Pet. Reply 2−3 (citing Hybritech Inc. v. Monoclonal Antibodies, Inc., 802 F.2d 1367, 1376 (Fed. Cir. 1986). For these reasons, we agree with Petitioner that Patent Owner has not” slip op. at 6

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Applicant-admitted prior artDecided for petitioner

    “B. Whether Petitioner Relies on Applicant Admitted Prior Art Patent Owner asserts we should “not consider” Yamazaki-based challenges because Petitioner included Applicant Admitted Prior Art (AAPA) in those grounds. See PO Resp. 16 (citing Qualcomm Incorporated v. Apple Inc., 134 F.4th 1355 (Fed. Cir. 2025)) (holding that AAPA may not be part of the basis for an inter partes review). We disagree. As Petitioner notes, it “utilizes the AAPA in the alternative with Ghosh, to show that it was known to manufacture OLED devices in bulk (which [Patent Owner] does not dispute).” Pet. Reply 9. Because “[t]he Petition identifies disclosures in Ghosh that independently demonstrate the same teachings for which the AAPA is cited,” we agree with Petitioner that it does not improperly rely on AAPA for any of its challenges. Id.” slip op. at 8

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “C. Whether Yamazaki, Weaver, and Palanisamy Are Printed Publications under 35 U.S.C. § 311(b) Patent Owner asserts that Yamazaki, Weaver, and Palanisamy do not qualify as printed publications under 35 U.S.C. § 311(b) because they only qualify as prior art under § 102(e). PO Resp. 17. According to Patent Owner, “[e]ven though the Federal Circuit has held that such references are ‘printed publications’ under 311(b), to preserve arguments on appeal, Patent Owner submits that such an interpretation is inconsistent with the plain statutory language, the precedent, and non-public accessibility of an unpublished patent application.” Id. We disagree with this argument because the Federal Circuit has rejected it, as Patent Owner acknowledges. See Lynk Labs, Inc. v. Samsung Electronics Co., 2023-2346, Slip. Op. (Fed. Cir. Jan. 14, 2025).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Yamazaki does not involve multiple devices on a substrate” and Ghosh teaches “non-selective deposition of at least the barrier layer.” PO Resp. 31. We disagree with this argument because it attacks Yamazaki and Ghosh individually, rather than the combination of Yamazaki’s selective deposition and Ghosh’s plurality of devices that Petitioner asserts. See In re Keller, 642 F.2d 413, 426 (CCPA 1981). We also disagree with Patent Owner’s criticism that Petitioner fails to explain why skilled artisans would have ignored Ghosh’s non-selective deposition method for barrier layers on multiple devices. PO Resp. 32. This argument attacks a straw man as Petitioner does not propose modifying Ghosh’s method with Yamazaki’s selective deposition. See Pet. 21–23. Rather, Petitioner proposes modifying Yamazaki’s selective deposition method by applying it to Ghosh’s teaching of encapsulating a plurality of OLED devices. Id. Next, Patent Owner asserts that skilled artisans would not have extended Yamazaki’s single-device fabrication/encapsulation method to a plurality of devices on a substrate because doing so would “multiply defects and errors, drop the yield exponentially, and increase the cost.” PO Resp. 34. Patent Owner asserts that precision/defect problems would be particularly acute when using Yamazaki’s inkjet method to print devices’ electro luminescence layers. Id. at 35–36. We disagree. Even if extending Yamazaki’s method to Ghosh’s multiple devices comes at a cost of potential defects, that tradeoff would not undermine Petitioner’s proffered combination given Petitioner’s articulated benefits outline above, including facilitating manufacturing display panels for OLEDs with improved throughput, improved productivity, and reduced manufacturing costs, as compared to fabricating/encapsulating just a single device. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”). It also does not matter that “inkjet printing yielded devices of half the efficiency than spin coating,” as Patent Owner asserts (PO Resp. 35), because Petitioner does not need to show that Yamazaki’s inkjet printing would be the best option for batch fabrication/encapsulation, only that it would was a suitable one from which the prior art did not teach away. See Par Pharm., Inc. v. TWi Pharms., Inc., 773 F. 3d 1186, 1197–98 (Fed. Cir 2014). That is, Petitioner does not need to show that Yamazaki’s inkjet method was an improvement over other known fabrication/encapsulation methods, so long as it was a known fabrication/encapsulation method and skilled artisans would understand that implementing it for a plurality of devices had known advantages over fabricating/encapsulating a single device, which Petitioner identifies. See Pet. 22. We also agree with Dr. Subramanian that skilled artisans would have a reasonable expectation of success in making the proposed combination given similarities between the references (both are directed to encapsulation of an OLED display device with multiple thin-film layers and at least the first encapsulation is selectively deposited) and because “as the ’389 patent admits, in the prior art it was conventional to use batch fabrication to manufacture OLED display devices with thin-film encapsulation.” Ex. 1003 ¶ 86. As Dr. Subramanian explains, a particular advantage of inkjet printing is that it scales well to larger areas and it was known at the time of the ’389 patent that inkjet could be used to print multiple devices on a glass substrate. Ex. 1032 ¶¶ 2, 27–28. Patent Owner’s argument that “Yamazaki’s methods are far from ready for manufacturing” (PO Resp. 34) goes well beyond what is necessary to show that skilled artisans would have had a reasonable expectation of achieving what is claimed. See Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Given Petitioner’s analysis outlined above, we agree with Petitioner that it would have been obvious to skilled artisans to fabricate and encapsulate multiple OLED devices on a substrate using Yamazaki’s ink-jet methods. slip op. at 15

  Patent outcomesUS 6,949,389 unpatentable
  § 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 6,949,389
• Boe Technology Group Co., Ltd. v. Optronic Sciences LLCAll claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01132 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1–7 are unpatentable: claims 1–3 and 5 are anticipated by Anzai, claim 4 is obvious over Anzai and Yamazaki, and claims 1–7 are obvious over Yamazaki and Anzai.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner describes a person of ordinary skill in the art (“POSITA” or “ordinarily skilled artisan”) at the time of the invention as having “a Bachelors’ degree in electrical engineering or a comparable field of study, plus approximately two to three years of professional experience with electronic and optoelectronic device design” and notes that “[a]dditional graduate education could substitute for professional experience, and significant experience in the field could substitute for formal education.” Pet. 5–6 (citing Ex. 1002, Neikirk Decl., ¶ 23). Patent Owner’s expert, Dr. Bretschneider testifies that In my opinion, the field of “electronic and optoelectronic device design” is too broad. A POSITA of the ’121, had at least a Bachelors’ degree in a field of engineering or physics and at least two to three years of professional experience related to the design and manufacture of the relevant aspects of flat panel displays. Additional relevant graduate education related [sic] could reduce but not eliminate the time requirement for professional experience. While Dr. Neikirk proposes a different definition of a POSITA, the differences do not have material effect on my opinions rendered below. Regardless of which definition of a POSITA were used, my conclusions would remain the same Ex. 2005, Bretschneider Decl., ¶ 39. We agree with and will apply Petitioner’s statement of the level of ordinary skill in the art. This level of ordinary skill is reflective of the education and experience that would have been required to understand the problems and solutions identified in the ’121 patent and the prior art. Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001). We note that our conclusions would be the same even if we applied Patent Owner’s slightly narrower definition of a POSITA.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We find these definitions to be of some help in construing this term. We find that the common thread is that a “passivation layer” is an insulating layer that provides protection from the environment to the layers below it. See Ex. 1012, 140; Ex. 1013, 542, Ex. 1014, 798; Ex. 2010, 3; Ex. 2013, 1. We find this construction to be most consistent with the broad claim language and the disclosure in the Specification. Although “tying up dangling bonds,” may be a mechanism by which some materials provide such protection, nothing in the Specification or the extrinsic evidence provided appears to require that. Also, while chemical protection may be one kind of protection none of the evidence suggests that is the only protection that is provided. Moreover, nothing in the Specification supports reading a chemical protection requirement into the construction. Thus, we decline to adopt that portion of Patent Owner’s construction. Instead, we construe passivation layer as “an insulating layer that provides protection from the environment to the layers below it.” We need not construe the term any further to resolve the parties’ dispute over this claim language. See Realtime, 912 F.3d at 1375.” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “constructions for “passivation layer” and “capping layer.” We find that Petitioner has presented sufficient evidence to show that Anzai discloses both a “passivation layer” and a “capping layer.” As we explained above, we have construed “passivation layer” to mean “an insulating layer that provides protection from the environment to the layers below it.” Petitioner has shown that “first planarization film 17” is an insulating layer. See Ex. 1002 ¶¶ 62–65. We further find that Petitioner has shown sufficiently that “first planarization film 17” is “formed over the entire surface for flattening, which will protect the semiconductor surface from the surrounding environment.” Id. ¶ 63. We have rejected Patent Owner’s contentions that the film must tie up “dangling bonds,” and instead determined that protecting the surface from the environment is sufficient. Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the “passivation layer” of claim 3. As we explained above, we have construed “capping layer” to be “an insulation layer covering (i.e., capping) an underlying layer or structure.” Here, Petitioner has shown that Anzai’s planarization film 19 meets the claimed “capping layer.” See Pet. 20. We find that Petitioner has shown that it is more likely than not that “planarization film 19” is made of insulating material. As Dr. Neikirk persuasively testifies, Anzai discloses that planarization layer 17 may be made of an organic resin for flattening the surface. EX1003, 4:20-24. While Anzai does not disclose the material for planarization layer 19, it must be made of an insulation material because in the embodiment of Fig. 3A, it is the sole layer between electrode layer 71 and cathode layer 65 forming the second capacitor. Id., 6:3–8; Fig. 3A. Moreover, Anzai discloses that the first planarization film 17 and the second planarization film 19 for the first embodiment “function as the capacitance insulating film for this configuration.” Id., 5:62–67. Ex. 1002, Neikirk Decl., ¶ 62. We find this testimony well-reasoned and entitled to substantial weight. We further agree with Dr. Neikirk that a “POSITA would further understand that the second planarization film 19 is then further disposed on the first planarization film 17 (capping the passivation layer).” Id. ¶ 63 (citing Ex. 1003, 5:3–13; Figs. 2A–B, 3A–B). Thus, we find that Petitioner has shown by a preponderance of the evidence that Anzai discloses the claimed “capping layer.” Accordingly, we find that Petitioner has shown by a preponderance of” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “motivation to combine Anzai and Yamazaki. See Pet. 25–27; Ex. 1002, Neikirk Decl., ¶¶ 78–79. First, Patent Owner argues that essentially silicon nitride is an inferior material to use for Anzai’s planarization layer 17 compared with organic resin. PO Resp. 13–15. However, “[i]t’s not necessary to show that a combination is the best option, only that it be a suitable option.” Intel Corp. v. Qualcomm Inc., 21 F.4th 797, 800 (Fed. Cir. 2021) (emphasis in original). Patent Owner does not argue that silicon nitride would not work, but rather that it would be more difficult and more expensive to use. See PO Resp. 14. But “the fact that the two disclosed apparatus[es] would not be combined by businessmen for economic reasons is not the same as saying that it could not be done because skilled persons in the art felt that there was some technological incompatibility that prevented their combination. Only the latter is telling on the issue of nonobviousness.” Grit Energy Solutions LLC v. Oren Techs., LLC, 957 F.3d 1309, 1323 (Fed. Cir. 2020) (quoting Orthopedic Equip. Co., Inc. v. United States, 702 F.2d 1005, 1013 (Fed. Cir. 1983)). “Likewise, a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Here, Petitioner explains that “a POSITA would have known that organic materials usually have lower dielectric constants than inorganic materials, such as SiN, and a higher dielectric constant is desirable for the insulator in a capacitor since that leads to higher capacitance per unit area.” Pet. 26 (citing Ex. 1002, Neikirk Decl., ¶ 78). Petitioner further explains that this “then allows a reduced area storage capacitance element, one of the objectives of Anzai.” Id. (citing Ex. 1003, code (57)). Patent Owner’s focus mainly on planarization (PO Sur-reply 16–17) ignores that the Anzai’s planarization layers 17 and 19 also “function as the capacitance insulating film.” Ex. 1003, 5:65–67. Thus, although there are tradeoffs, Petitioner has shown sufficiently that a POSITA would have been motivated to incorporate the teachings of Yamazaki regarding potential materials for planarization layers 17 and 19. Second, Patent Owner argues that a Petitioner has failed to provide an adequate reason to select silicon nitride from Yamazaki’s list of potential materials. We disagree. Petitioner has explained the benefits of selecting a high dielectric inorganic material. Pet. 26. Yamazaki provides only three potential options—silicon oxide, silicon nitride, and silicon oxynitride. See Ex. 1004, 11:45–50. Moreover, Dr. Neikirk testified, supported by multiple references, that using silicon nitride was well known in the prior art at the time of the invention. See Ex. 1002, Neikirk Decl., ¶ 75 (citing Ex. 1007; Ex. 1008; Ex. 1009). “When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp.” KSR, 550 U.S. at 421. Indeed, “[i]f a person of ordinary skill can implement a predictable variation, § 103 likely bars its patentability.” Id. at 417. This is the case here. Petitioner has shown that a person of ordinary skill seeking to improve the capacitance of Anzai’s planarization layers 17 and 19, without increasing the size of the capacitor, would have looked at the inorganic materials identified in Yamazaki as suitable for the purpose, and it would have been would obvious to choose silicon nitride, a well-known, and predictable material for the application. Thus, we disagree with Patent Owner that Petitioner has failed to show a sufficient reason for selecting silicon nitride from Yamazaki’s list of suitable materials. Third, Patent Owner argues that Petitioner’s contentions only support” slip op. at 37

  Patent outcomesUS 7,586,121 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,586,121
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Feb 9, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision

  Claims 2, 4, 9–12, and 17 are unpatentable under § 103 because the prior-art combinations teach the claimed features and have adequate motivation and reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art “would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 12

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “1. Whether Ma Qualifies as a Prior Art Printed Publication First, Patent Owner argues that Petitioner has not demonstrated that Ma was publicly accessible in August 2008 so as to qualify as prior art. PO 11 As Petitioner notes, the district court adopted a claim construction requiring only “one or more wavelengths” in the infrared-to-UV spectrum. PO Resp. 26 (citing Ex. 2031, 47–48). Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 10

  Patent outcomesUS 11,828,425 unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 11,828,425
• Lenovo (United States), Inc. v. University Of RochesterSome claims unpatentable
  PTAB · Feb 2, 2026 · IPR2024-01225 · APJ Thu A Dang · IPR · Final written decision

  Claims 1 and 3–7 are unpatentable as obvious; claims 8–12 were not shown unpatentable because the asserted grounds did not establish asynchronous operation between domains.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “specification is the ‘single best guide to the meaning of a disputed term,’ . . . and ‘is, thus, the primary basis for construing the claims.’” Trs. of Columbia Univ. in City of New York v. Symantec Corp., 811 F.3d 1359, 1362 (Fed. Cir. 2016) (citations omitted). Although Patent Owner contends that the Specification disparages systems that impose significant restrictions on the possible choices of frequencies (PO Resp. 21), we find availing Petitioner’s contention that “[s]upport for Patent Owner’s construction is absent from the specification.” Pet. Reply 10. As Petitioner points out, Patent Owner’s claim construction “appears to be based on a single paragraph of the ’443 patent referring to preexisting ‘synchronization schemes [that] restrict the phase relationship and relative frequencies of the clocks.” Id. That is, the only reference by Patent Owner to the Specification is that the Specification states that “Some synchronization schemes restrict the . . . relative frequencies of the clocks, thereby eliminating the need for hardware arbitration [27]. Unfortunately, these schemes impose significant restrictions on the possible choices of frequences.” PO Resp. 26 (citing Ex. 1001, 6:32–36). We agree with Petitioner that such disclosure in the Specification “does not describe how these synchronization schemes ‘restrict the phase relationship and relative frequencies’ with any specificity.’” Pet. the Specification that some schemes impose restrictions on the possible choices of frequency is not a disparagement of any system that has limited choices of frequency or would preclude the claims from covering such prior art techniques. Instead, as Petitioner points out, the Specification of the ’443 patent states “[t]he preferred embodiment uses four domains […] so that domains may vary somewhat in size and still be covered by a single clock.” Id. (citing Ex. 1001, 5:57–59). As Dr. Baker testified in support of Petitioner’s contention, “the preferred embodiment of the ’443 patent relies on a single external master clock that distributes a signal to the local PLL of each domain.” See Ex. 1032 ¶ 9. Thus, although Patent Owner contends that clock signals generated based on a master clock cannot be interpreted to be generated independently of the clock signals generated for others of the plurality of domains (PO Resp. 49), we agree with Petitioner that such claim construction would “exclude[] the preferred embodiment of the ’443 patent,” which is disfavored. Pet. Reply 11. For the reasons discussed above, we conclude that “changeable independently” of the other domains does not require that the separate clocks in the plurality of domains be globally-asynchronous.” slip op. at 12

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedDecided for petitioner

    “As both parties recognize, (PO Resp. 5; Pet. Reply 12), “[actual] [r]eduction to practice in the United States requires that the invention be embodied in tangible form.” Scott v. Koyama, 281 F.3d 1243, 1247 (Fed. Cir. 2002). In particular, actual reduction to practice requires a showing of the invention in a physical or tangible form that shows every element. not sufficient. See Kimberly-Clark v. Johnson & Johnson, 745 F.2d 1437, 1445 (Fed. Cir. 1984). Here, Patent Owner does not provide any evidence showing every element of the claims in physical or tangible form, as required, but rather contends that the Specification refers to the Paper, wherein the Paper stated that simulation using a software, SimpleScalar, was performed. PO Resp. 16. We are persuaded by Petitioner’s contention that the SimpleScalar simulation was not an actual reduction to practice of the claimed invention. Pet. Reply 12. As Petitioner points out, claim 1, for example, is directed to a “microprocessor,” wherein “Patent Owner has presented no evidence and has not alleged that any physical microprocessor was ever produced or operated.” Id. at 13; see PO Resp. 15–17. And as Petitioner points out, “Patent Owner has produced no evidence of any physical prototype of the claimed microprocessor that could have validated the simulation.” Pet. Reply 13–14. We agree with Petitioner that, at most, such simulation “demonstrated feasibility for prototyping of a microprocessor,” but not a tangible form of the microprocessor itself as required for an actual reduction to practice. Id. at 14; see also Standard Mfg. Co. v. United States, 25 Cl. Ct. 1, 67 (1991) (“The feasibility of the optical alignment system may have been proven by the optical mock-up, but the optical mock-up was not a reduction to practice of the proposed MHU–145/M trailer.”).” slip op. at 36

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Here, we find that Petitioner has not met its burden to prove that one of ordinary skill in the art would have recognized that “the functional units of Georgiou operate asynchronously since they have different clocks.” Pet. 74 (citing Ex. 1002 ¶¶ 53–56, 211–219). Specifically, although Petitioner relies on Georgiou for teaching different clocks, Petitioner’s conclusory statement that such application would operate asynchronously requires gapfilling. Id. As Patent Owner points out, Georgiou discloses a clocking architecture in which “all domain clocks are derived from a shared master clock through predetermined rational dividers.” PO Resp. 49. Petitioner concedes during the oral hearing that, in systems such as Georgiou, each domain clock is set a fraction of a master clock, and thus, the various domain clocks are “possibly” synchronous with each other. Tr. 59:4–14 (JUDGE DANG: . . . would being fractions of the master, wouldn’t they be synchronized with each other? MR UHR: They may be, . . . the answer is possibly.”) Thus, we find Petitioner’s contention that a POSITA would have recognized that the functional units of Georgiou operate “asynchronously” lacks sufficient support in the record. We find the testimony of Dr. Baker insufficient to support Petitioner’s position. Ex. 1002 ¶¶ 53–56, 213, 215–219. In his declaration, Dr. Baker testified that he “provided several references . . . that explain operating domains asynchronous to one another while the domains operate synchronously.” Id. ¶¶ 215–219. However, although such references explain “globally asynchronous, local synchronous (GALS) systems” (id. ¶ 216), Dr. Baker does not explain why a POSITA “would have known that a functional unit of Georgiou also operates asynchronous with respect to at different frequencies.” Id. ¶ 217. Without evidentiary support, we are left with speculation and impermissible hindsight. See in Re Wagner, 379 F.2d 1011, 1017 (CCPA 1967). We decline to engage in speculation. See, e.g., In re Vaidyanathan, 381 F. App’x 985, 993 (Fed. Cir. 2010); In re Wallen, 565 F. App’x 867, 869 (Fed. Cir. 2014), both citing In re Zurko, 258 F.3d 1379, 1386 (Fed. Circ. 2001) ([T]he Board must point to some concrete evidence in the record in support of these findings.”). In sum, based on our review of the record, we find Petitioner’s showing is insufficient. Thus, based on the complete record presented, we determine that Petitioner has not persuasively shown that Georgiou teaches “operating the microprocessor such that each domain operates synchronously, while the domains operate asynchronously relative to one another,” as recited in claim 8.” slip op. at 28

  • BurdenMixed

    “of ordinary skill in the art would have recognized that “the functional units of Georgiou operate asynchronously since they have different clocks.” Pet. 74 (citing Ex. 1002 ¶¶ 53–56, 211–219). Specifically, although Petitioner relies on Georgiou for teaching different clocks, Petitioner’s conclusory statement that such application would operate asynchronously requires gapfilling. Id. As Patent Owner points out, Georgiou discloses a clocking architecture in which “all domain clocks are derived from a shared master clock through predetermined rational dividers.” PO Resp. 49. Petitioner concedes during the oral hearing that, in systems such as Georgiou, each domain clock is set a fraction of a master clock, and thus, the various domain clocks are “possibly” synchronous with each other. Tr. 59:4–14 (JUDGE DANG: . . . would being fractions of the master, wouldn’t they be synchronized with each other? MR UHR: They may be, . . . the answer is possibly.”) Thus, we find Petitioner’s contention that a POSITA would have recognized that the functional units of Georgiou operate “asynchronously” lacks sufficient support in the record. We find the testimony of Dr. Baker insufficient to support Petitioner’s position. Ex. 1002 ¶¶ 53–56, 213, 215–219. In his declaration, Dr. Baker testified that he “provided several references . . . that explain operating domains asynchronous to one another while the domains operate synchronously.” Id. ¶¶ 215–219. However, although such references explain “globally asynchronous, local synchronous (GALS) systems” (id. ¶ 216), Dr. Baker does not explain why a POSITA “would have known that a functional unit of Georgiou also operates asynchronous with respect to at different frequencies.” Id. ¶ 217. Without evidentiary support, we are left with speculation and impermissible hindsight. See in Re Wagner, 379 F.2d 1011, 1017 (CCPA 1967). We decline to engage in speculation. See, e.g., In re Vaidyanathan, 381 F. App’x 985, 993 (Fed. Cir. 2010); In re Wallen, 565 F. App’x 867, 869 (Fed. Cir. 2014), both citing In re Zurko, 258 F.3d 1379, 1386 (Fed. Circ. 2001) ([T]he Board must point to some concrete evidence in the record in support of these findings.”). In sum, based on our review of the record, we find Petitioner’s showing is insufficient. Thus, based on the complete record presented, we determine that Petitioner has not persuasively shown that Georgiou teaches “operating the microprocessor such that each domain operates synchronously, while the domains operate asynchronously relative to one another,” as recited in claim 8.” slip op. at 28

  Patent outcomesUS 7,089,443 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,089,443

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.