• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Taiwan Semiconductor Manufacturing Company Ltd. / Apple Inc. v. Marlin Semiconductor Ltd.Instituted
  PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution

  Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,745,847
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Instituted
  PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution

  The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Cradlepoint, Inc. / Honeywell International, Inc. et al. v. Sisvel S.P.A.No claims unpatentable
  PTAB · Sep 29, 2025 · IPR2021-00580 · APJ Monica S Ullagaddi · IPR · Remand

  On remand, the Board held claims 1–10 not shown unpatentable under the Sachs anticipation and obviousness grounds because Sachs did not disclose the required timer stopping, and the new theories were not considered.

  RulingsRemand decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Whether Mr. Bates is a Person of Ordinary Skill in the Art In the Final Written Decision, we adopted Petitioner’s definition because “there does not appear to be a dispute that needs to be resolved.” FWD 8. Here, where Mr. Bates’ qualifications are challenged, we have reviewed the complete record including the parties’ arguments on remand and we find that Mr. Bates does not meet the requirements for a person of ordinary skill in the art according to Petitioner’s definition for level of ordinary skill in the art, which we adopted (see FWD 8). Notably, the panel adopted Petitioner’s definition of the level of ordinary skill in the Institution Decision (Paper 16, 8), and neither party challenged that determination during the trial, although Patent Owner did offer its own definition (PO Resp. 9). Mr. Bates has one degree: “a bachelor’s degree in Business Management.” Ex. 2001 ¶ 7. A degree in Business Management is not “a degree in electrical engineering or a similar discipline.” Pet. 35 (emphasis added). Accordingly, we disregard the testimony of Mr. Bates in rendering our findings and conclusions in this Decision. We note that, even if we did consider Mr. Bates’s testimony, the findings and conclusions rendered in this Decision would not change.” slip op. at 12

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “cover for his lack of education.” Pet. Remand Br. 4. Patent Owner disagrees and argues, inter alia, that “Mr. Bates was a pioneer in the cellular telecommunications field with more than five decades of practical and teaching experience.” PO Remand Resp. 5 (citing Ex. 2001 ¶¶ 8–23) (emphasis omitted); see id. at 3–4, 6. Whether Mr. Bates is a Person of Ordinary Skill in the Art In the Final Written Decision, we adopted Petitioner’s definition because “there does not appear to be a dispute that needs to be resolved.” FWD 8. Here, where Mr. Bates’ qualifications are challenged, we have reviewed the complete record including the parties’ arguments on remand and we find that Mr. Bates does not meet the requirements for a person of ordinary skill in the art according to Petitioner’s definition for level of ordinary skill in the art, which we adopted (see FWD 8). Notably, the panel adopted Petitioner’s definition of the level of ordinary skill in the Institution Decision (Paper 16, 8), and neither party challenged that determination during the trial, although Patent Owner did offer its own definition (PO Resp. 9). Mr. Bates has one degree: “a bachelor’s degree in Business Management.” Ex. 2001 ¶ 7. A degree in Business Management is not “a degree in electrical engineering or a similar discipline.” Pet. 35 (emphasis added). Accordingly, we disregard the testimony of Mr. Bates in rendering our findings and conclusions in this Decision. We note that, even if we did consider Mr. Bates’s testimony, the findings and conclusions rendered in this Decision would not change.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “C. Claim Construction The Federal Circuit determined that “the plain and unambiguous language of claim 1 requires that a method, to come within the claim, must perform both limitations 1[c] and 1[d] where their preconditions apply.” Sierra Wireless, 130 F.4th at 1022. We interpret the claims and analyze Petitioner’s unpatentability arguments under the Federal Circuit’s determination.” slip op. at 13

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Petitioner was on notice, when Patent Owner’s Response was filed at the latest, that claim 1 could be construed as unconditionally requiring both limitations 1[c] and 1[d]. Indeed, Petitioner contended that it had shown both limitations “in single references.” Pet. Reply 5. Petitioner now seeks to shift its unpatentability contentions for limitation 1[c] from Figure 5 of Sachs to Figures 6 and 7. Petitioner’s new reliance on Figures 6 and 7 of Sachs is “a meaningfully distinct contention” from its position in both the Petition and the Reply. See Ariosa Diagnostics v. Verinata Health, Inc., 805 F.3d 1359, 1367 (Fed. Cir. 2015). We therefore find that Petitioner impermissibly presents new theories of unpatentability on remand. 3. Independent Claim 1 We decline to address Petitioner’s new theories of unpatentability proposed on remand concerning Sachs’s Figure 7. See Pet. Remand Br. 15– 20. Although Petitioner cites pages 59–61 of the Petition as discussing Figure 7 of Sachs (see Pet. Remand Br. 15), the cited discussion concerns dependent claims 5 and 10, not independent claims 1 and 8.” slip op. at 17

  Patent outcomesUS 7,869,396 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,869,396
• Comcast Cable Communications, LLC v. Entropic Communications, LLCSome claims unpatentable
  PTAB · Sep 4, 2025 · IPR2024-00430 · APJ Jon M Jurgovan · IPR · Final written decision

  Claims 1–3, 6–10, 14–18, and 22–24 are unpatentable; claims 4–5, 11–13, and 19–21 are not shown unpatentable.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for petitioner

    “We agree with Petitioner that the ’690 patent does not limit the term “probe” to channel assessment. Pet. Reply 2–4. Reviewing the intrinsic evidence, the “Technical Field” of the ’690 patent states that “some embodiments relate to channel assessment probes,” implying others do not. Ex. 1001, 1:13–14. The ’690 patent further states that “receiver determined probes may be used in a variety of applications” including to “discover hidden nodes” and “off-site network diagnosis.” Id. at 2:20–27. In addition, the ’690 patent states that probes may be used for “network maintenance procedures,” to “replicate a potential problem, reach or discover a distant or previously undetected node on the network, or assist with network admissions procedures.” Id. at 4:25–38. Turning to the claims of the ’690 patent, the evidence of record does not establish that the independent claims recite anything unique or specific to channel assessment (although their scope covers that purpose). Furthermore, dependent claim 7 of the ’690 patent recites that the “probe” is used to diagnose a network problem, and dependent claim 13 recites that the “probe” is used to identify a hidden node. Restricting the independent claims to probes used solely for channel assessment would be contradictory to these dependent claims. Littlefuse, Inc. v. Mersen USA EP Corp., 29 F.4th 1376, 1380 (Fed. Cir. 2022) (construction of term in independent claims should not render dependent claims superfluous or lacking scope).” slip op. at 20

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “We agree with Petitioner that a “physical layer probe” is “a probe that relates to the physical layer.” The term does not appear per se in the specification of the ’960 patent, nor in the prosecution history, but only in claims 9, 17, and 19. However, the term “physical layer” is well-known and is the first layer in the Open Systems Interconnection (OSI) network model. See, e.g., Ex. 1021, 35–40, 69; Ex. 1002 ¶¶ 49–50. The physical layer is used to transmit digital bits over a network, and defines the timing, mechanical, and physical network characteristics required for transmitting the data bits. Hence, a “physical layer probe” is a probe that relates to the physical layer. We need not, and do not, construe the term further to resolve the parties’ dispute. See Realtime, Vivid Techs., supra. Having decided proper constructions for the disputed terms, we proceed in our analysis to consider the parties’ arguments concerning the challenge grounds. In the following sections, we apply the plain meaning of the claim terms, and as necessary, specify what the plain meanings are.” slip op. at 23

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “C. Level of Ordinary Skill in the Art Petitioner contends as follows: A POSITA8 would have had a bachelor’s degree in electrical engineering, computer engineering, or a similar discipline, and three to four years of experience working in signal processing and/or communication systems/networks. Additional education may substitute for experience, and significant work experience may substitute for formal education. Pet. 6 (citing Ex. 1002 ¶¶ 115–120). Patent Owner does not dispute Petitioner’s proposed level of skill in the art. We adopt and apply Petitioner’s proposed skill level because it is consistent with the problems and solutions identified in the ’690 patent and the prior art references asserted by Petitioner. In addition, we find the adopted skill level consistent with the education and experience that a POSITA would have had. See In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)) (citing factors to consider when determining level of ordinary skill in the art).” slip op. at 25

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “Hence, we determine that Petitioner has shown by preponderant evidence that the Ranging Request (“probe request”) message includes CID and SS MAC address and other parameters (“first plurality of parameters”) which at least specify the CID (“content payload of the probe”) and the SS MAC address (“second node”) of the Ranging Response.12 We thus proceed to consider Petitioner’s contentions for the remaining limitations of claim 1, which are undisputed, and determine that claim 1 is anticipated by IEEE-802.16.” slip op. at 29

  Patent outcomesUS 8,284,690 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,284,690
• Comcast Cable Communications, LLC v. Entropic Communications, LLCAll claims unpatentable
  PTAB · Sep 3, 2025 · IPR2024-00441 · APJ Aaron W Moore · IPR · Final written decision

  Claims 1–18 are unpatentable over Kamieniecki and Konstantinos; Petitioner did not show claims 1–18 unpatentable over Renken or Renken and Cholas because Renken is not prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Level of Ordinary Skill in The Art Petitioner contends that a person having ordinary skill in the art “would have had a degree in electrical engineering or a similar discipline, and three-to-four years of experience working with television signal processing and communication 1 Because the challenged claims have an effective filing date before the effective date of the AIA, we apply the pre-AIA version of 35 U.S.C. § 103. 2 US 2005/0114879 A1, published May 26, 2005 (Ex. 1009). 3 US 2010/0120386 A1, published May 13, 2010 (Ex. 1010). 4 US 2010/0303181 A1, published Dec. 2, 2010 (Ex. 1016). 5 US 2008/0313691 A1, published Dec. 18, 2008 (Ex. 1017). 6 US 8,649,421 B2, issued Feb. 11, 2014 (Ex. 1011). systems,” and that “[a]dditional education may substitute for professional experience and significant work experience may substitute for formal education.” Pet. 30 (citing Ex. 1002 ¶¶ 40–42). “Patent Owner accepts the Petition’s [description of a person of ordinary skill] solely for purposes of responding to the Petition in this proceeding.” PO Resp. 11. Based on our review of the record before us, we determine that Petitioner’s stated level of ordinary skill in the art is reasonable because it appears consistent with the evidence of record, including the asserted prior art. Accordingly, we apply Petitioner’s definition in this Decision. B.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “On the present record, we do not discern a need to construe explicitly any claim language because doing so would have no effect on our analyses and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). C.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “We agree that the record provides sufficient evidence that one of ordinary skill in the art would have found it advantageous to add a multi-channel receiver to improve monitoring, as Petitioner argues. Having the ability to monitor without waiting for idle or disturbing users would be a clear advantage.” slip op. at 18

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “We conclude that Patent Owner has not shown a sufficient nexus between the claimed invention and any product embodying the claimed invention that was successful, praised, or solved a long-felt need. Patent Owner identifies five elements allegedly required “[t]o implement MaxLinear’s Remote Spectrum Monitoring in CPE.” See PO Resp. 65. To support this, Patent Owner cites pages 5–7 of Exhibit 2009. See id.7 That exhibit, however, describes requirements for “Full Band Capture,” not MaxLinear’s “Remote Spectrum Monitoring.” To” slip op. at 31

  Patent outcomesUS 8,792,008 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 8,792,008
• DISH Network LLC v. Entropic Communications, LLCAll claims unpatentable
  PTAB · Jul 22, 2025 · IPR2024-01059 · APJ Jon M Jurgovan · IPR · Final written decision

  Claims 1 and 3 are unpatentable as obvious over Kliger and Isaksson, and over Amit, Jacobsen, and Isaksson.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “Although Patent Owner points to various parts of the ’518 patent as supporting its proposal, other parts of the patent are not so limited. For example, the ’518 patent repeatedly mentions prior art patents disclosing communication techniques applied to twisted pair wiring, including discrete multi-tone (DMT) modulation and bit loading. Ex. 1001, 3:49–50, 3:67–4:2, 8:19–26. The patent further mentions that its data network overlays cable or satellite services. See, e.g., id. at 5:1–6. Thus, a POSITA would not be limited to experience only with “coaxial cables” as opposed to work involving signal processing and/or communication systems/networks more generally. The ’518 patent describes the “Technical Field” as “broadband communication networks and specifically . . . communications using coaxial cable building wiring.” Id. at 1:25–30. We find it appropriate here to use the broader statement of “broadband communication networks” as the field of a POSITA’s experience. The challenged claims of the ’518 patent relate to a “data communication network” comprising “cable wiring” with “segments of coaxial cable.” Id. at 12:16–19. This does not mean that the “cable wiring” is strictly coaxial—only that it includes segments that are.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningOther

    “Petitioner contends that the challenged claims are “obvious under any reasonable interpretation,” so “no express constructions are required.” Pet. 3. Patent Owner does not offer construction of any claim term, so there is no dispute over claim construction that we need to resolve. We apply the ordinary and customary meanings consistent with 37 C.F.R. § 42.100(b).” slip op. at 12

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “The ’518 patent seeks to overcome channel impairments by using probe messages to characterize the communication channel and determine optimum bit loading. Ex. 1001, code (57). These impairments include signal reflections, ISI, and signal attenuation. Pet. Reply 9–10 (citing Ex. 1001, 3:5–19). Similarly, Isaksson estimates channel characteristics by periodic transmission of a base sync frame from one transceiver to another where it is compared with a reference frame. Ex. 1013, 10. Isaksson’s channel characteristics may include attenuation, phase shifting, and variance, which are similar to the problems identified in the ’518 patent. Id. Both the ’518 patent and Isaksson address the problem of ISI by using bit loading to transmit data using sub-carriers less affected. Ex. 1001, 3:5–20; Ex. 1013, 16, 35, 79. Hence, we find the problems identified in the ’518 patent and Isaksson of how to overcome channel impairments reasonably pertinent such that Isaksson is analogous art to the ’518 patent. We find unavailing Patent Owner’s arguments that the ’518 patent is specific to in-home networks with coaxial cables and splitters whereas Isaksson is restricted to twisted pair, point-to-point networks having no intervening devices and which are located outside of homes. PO Resp. 15– 20; PO Sur-Reply 21–24. Any such differences do not change the fundamental nature of the problems of noise and interference affecting these environments. Such differences go more toward the field of endeavor than the reasonable pertinence of the problems each address. See Pet. Reply 10 (citing Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020)). Specifically, both the ’518 patent and Isaksson address the problem of channel impairments such as interference (e.g., ISI) and noise, and use the solution of bit loading to overcome them. See, e.g., Ex. 1001, 4:42–47; Ex. 1013, 1:3–7, 6:17–20, 16:10–16, 79:5–14. Hence, we find that the ’518 patent and Isaksson are analogous art because Isaksson is reasonably pertinent to the problems addressed in the ’518 patent notwithstanding Patent Owner’s arguments. We do not reach the question of whether the two are in the same field of endeavor.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Kliger identifies the problems of splitter reflections causing inter- symbol interference, external noise, and dynamic network conditions adversely affecting home network communications. Pet. 23–24 (citing Ex. 1007 ¶ 73; Ex. 1010, 5; Ex. 1004 ¶¶ 65–68). Isaksson teaches using multi-carrier modulation, such as DMT and OFDM, to address frequency dependent loss and noise using synchronized bit-loading based on carrier SNR. Id. at 24 (citing Ex. 1004 ¶ 69; Ex. 1013, code (57), 26:4–20). We agree with Petitioner that the combination of Kliger and Isaksson amounts to the use of known techniques (Isaksson’s synchronized bit-loading) to improve similar devices in the same way (overcoming interference and maintaining connections with other modems). Id. at 26–27 (citing KSR, 550 U.S. at 415–421). We do not agree with Patent Owner’s argument that Kliger already solves the issues that Petitioner identifies such that a POSITA would not have looked to Isaksson’s synchronized bit-loading. PO Resp. 50. Petitioner has established that Isaksson’s solutions would improve Kliger’s modulation by determining the number of bits-per-carrier based on SNR, disabling noisy carriers, and synchronizing bit loading. Pet. 23–28; Pet. Reply 23–24. Hence, a POSITA would have been motivated to improve Kliger with Isaksson. See KSR, 550 U.S. at 417 (“if a technique has been used to improve one device, and a [POSITA] would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill”). Patent Owner alleges that Kliger’s network is coaxial whereas Isaksson’s is point-to-point, twisted pair with no intermediary devices such as splitters which would cause the interference, noise, and attenuation that the ’518 patent addresses. PO Resp. 50–55. However, we do not agree that these alleged differences would have precluded a POSITA from making the combination of references. “Signal impairments such as reflections, noise, attenuation, and inter-symbol interference (ISI) are common challenges in nearly all communication mediums.” Ex. 1036 ¶¶ 23–27. Communication networks experience these challenges, whether point-to-point or shared, twisted pair or coaxial, in-home or out-of-home, with or without splitters. Id. As Petitioner’s expert, Dr. Williams, puts it, “a POSITA can draw from the same toolbox of known solutions to address these impairments regardless of the medium.” Id. ¶ 27. Among those solutions is Isaksson’s approach of synchronized bit-loading. Moreover, Isaksson expressly states that “[i]t should be emphasized that the present invention can be used not only with the MUSIC system as herein described, but with other multi-carrier systems employing dynamic bit loading.” Ex. 1013, 72:5–8 (emphasis added); Ex. 1004 ¶¶ 81–82. Hence, a POSITA would have been led to consider using Isaksson’s synchronized bit-loading with Kliger’s coaxial network which uses a multi-tone transmitter to determine whether to transmit power on each particular tone. See, e.g., Ex. 1007 ¶ 166; Ex. 1013 1:1–7. Further facilitating the combination is Kliger’s disclosure of using “a regular multi-tone transmitter (either OFDM or DMT) to determine whether to transmit power on each particular tone wherein tones can be silenced (which is, in effect, a form of bit-loading). See, e.g., Ex. 1007 ¶¶ 6, 166, Fig. 1; Ex. 1013, 1:1–7, 3:24–34, 4:21–25, 16:8–12. In addition, Kliger expressly recognizes and seeks to address signal impairments caused by splitters, including poor signal isolation, return loss performance, degradation at higher frequencies, and inter-symbol interference due to reflections (the same problems the ’518 patent addresses). Ex. 1007 ¶¶ 61, 73. Accordingly, a POSITA would have been motivated to combine teachings of Kliger and Isaksson. Patent Owner argues that Petitioner did not explain how a control channel would exist across a coaxial splitter’s multipath signal. PO Resp. 56–58 (citing Pet. 26; Ex. 1013, 73:4–15, 74:22–31, Fig. 33; Ex. 2002 ¶¶ 147–148). Patent Owner does not explain why it would be necessary to use Isaksson’s control channel in Kliger, particularly when Kliger has its own control channel. Ex. 1007 ¶¶ 63–64, 166. Patent Owner’s argument amounts to bodily incorporation of Isaksson in Kliger, which is not a proper approach to obviousness. See In re Keller, 642 F.2d 413, 426 (CCPA 1981). We further disagree with Patent Owner’s argument that Isaksson’s base sync frames (equivalent to the claimed probe messages) would not function in Kliger’s network. PO Resp. 58–60 (citing Pet. 26; Ex. 1007 ¶¶ 55–57; Ex. 1013, 24:8–28, Fig. 1; Ex. 2002 ¶¶ 149–154). Patent Owner’s arguments are directed toward an embodiment of Isaksson that Petitioner did not cite in its Petition. Pet. Reply 26. In any case, Patent Owner does not establish that using Isaksson’s base sync messages in Kliger’s system would have been beyond a POSITA’s skill. Id. at 25–26 (citing Ex. 1036 ¶¶ 90– 93). Patent Owner argues that Isaksson’s base sync frames would alter the principle of operation of Kliger because Kliger requires all devices to transmit fixed constellation size based on overall network characteristics rather than specific channel characteristics between each HNM. PO Resp. 60–63 (citing Ex. 1007, code (57), ¶¶ 40–44, 91, 99, Fig. 1; Ex. 1013, 3:24– 27, 20:24–25, 26:14–17, 78:5–79:5, Fig. 36; Ex. 2002 ¶¶ 155–157). Patent Owner has not established, however, that fixed constellation size is a “principle of operation” of Kliger, or that Kliger would require substantial reconstruction or redesign to incorporate variable constellation sizes. See In re Ratti, 270 F.2d 810, 813 (CCPA 1959). We agree with Dr. Williams that a POSITA would have sought to improve Kliger with Isaksson’s techniques. Ex. 1036 ¶ 95.” slip op. at 19

  Patent outcomesUS 7,295,518 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,295,518

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.