- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Favored Tech Corporation v. P2i LtdNo claims unpatentablePTAB · Aug 23, 2021 · IPR2020-00478 · APJ Jeffrey W Abraham · IPR · Final written decision
Favored Tech did not prove claims 1–17 unpatentable: Baalmann did not anticipate the asserted claims, and the obviousness grounds lacked adequate disclosure or motivation with a reasonable expectation of success.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionNo construction neededGranted
“After considering Petitioner’s arguments regarding claim 9, Patent Owner’s silence regarding claim 9, and the language in the ’070 patent itself (e.g., Ex. 1001, 11:45–52, 12:60–61), we agree with Petitioner that the term “1H, 1H, 2H, 3H-heptadecafluorodecylacylate” in claim 9 should be construed to correctly recite HDFDA (1H, 1H, 2H, 2H-heptadecafluorodecylacrylate). The error Petitioner identifies is conspicuous and undisputed, and the intrinsic record does not suggest a different interpretation. Fitbit, Inc. v. Valencell, Inc., 964 F.3d 1112, 1119–20 (Fed. Cir. 2020); Novo Industries, L.P. v. Micro Molds Corp., 350 F.3d 1348, 1357 (Fed. Cir. 2003). Additionally, after reviewing the parties’ remaining claim construction arguments and evidence, we determine that we do not need to expressly construe any other terms for purposes of this Decision because, as addressed in detail below, we find Petitioner’s showings deficient for reasons that do not depend on the construction of any claim term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art in the field of the ’070 patent would have had “at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 14 (citing Ex. 1002 ¶¶ 26–31). Patent Owner agrees with this proposed definition “with the understanding that ‘experience with plasma-polymerization techniques’ includes plasma-enhanced chemical vapor deposition (PECVD) techniques.” PO Resp. 9 (citing Ex. 2010 ¶ 20; Ex. 1002 ¶¶ 12, 63). In light of the record before us, we adopt Petitioner’s proposal regarding the level of one of ordinary skill in the art. As Patent Owner points out, Dr. Gleason states that PECVD is a form of plasma polymerization, and thus the parties agree that experience with plasma-polymerization techniques would include PECVD. PO Resp. 9; Ex. 1002 ¶ 63. The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner. Petitioner has failed to demonstrate adequately that each and every element in claim 1, arranged as recited in the claim, is found in a single prior art reference. NetMoneyIN, 545 F.3d at 1369; Karsten Mfg. Corp. v. Cleveland Golf Co., 242 F.3d 1376, 1383 (Fed. Cir. 2001). Here, Petitioner combines several different teachings from Baalmann to support its anticipation argument. For example, Petitioner relies on the “evacuable chamber with a volume of 1 m3” from Baalmann’s Example 1, but not the power (2kW) expressly disclosed as being used with that reactor of Example 1. Ex. 1004 ¶ 47. With regard to power density, Petitioner relies on Baalmann’s general disclosure that “[t]he electrical power input per chamber volume is set between 0.5 kilowatt/m3 and 5 kilowatt/m3.” Ex. 1004 ¶ 20. As Patent Owner points out, however, that power density range is not tied to any particular reactor volume or plasma zone volume. PO Resp. 19. Baalmann also fails to expressly disclose the plasma zone volume of the reactor in Example 1. See Ex. 1004 ¶¶ 47–48. To attempt to overcome this absence of an express disclosure, Petitioner argues that, for the reactor used in Example 1, the plasma zone volume and reactor volume are the same based on the configuration of the electrodes in the reactor. Pet. 24–25. Baalmann, however, does not expressly disclose the electrode configuration of the reactor in Example 1. See Ex. 1004 ¶¶ 47–48. Instead, Petitioner relies on Baalmann’s general disclosure of an embodiment wherein one electrode is formed by the chamber wall itself. Pet. 24–25; Ex. 1004 ¶¶ 35, 61. In so doing, Petitioner ignores the fact that Baalmann also states that “[t]wo opposite rod-shaped electrodes may also be used.” Ex. 1004 ¶ 35. In view of this, we disagree with Petitioner’s conclusion that a person of ordinary skill in the art “would have understood that chamber to be configured as described throughout the rest of the specification: with the chamber wall serving as one of the electrodes.” Pet. 24. Even if we were persuaded by Petitioner’s argument, the fact remains that Petitioner’s anticipation challenge is based on the combination of different features disclosed in separate portions of Baalmann. “Such picking and choosing . . . has no place in the making of a 102, anticipation rejection.” In re Arkley, 455 F.2d 586, 587–88 (CCPA 1972) (cited with approval in Sanofi-Synthelabo v. Apotex, Inc., 550 F.3d 1075, 1083 (Fed. Cir. 2008)); see also Microsoft Corp. v. Biscotti, Inc., 878 F.3d 1052, 1069 (Fed. Cir. 2017) (stating that anticipation is not proven by multiple, distinct teachings that the artisan might somehow combine to achieve the claimed invention).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“For all of the foregoing reasons, we are not persuaded by Petitioner’s argument that a person of ordinary skill in the art would have inferred the volume of the plasma zone10 in Coulson is 470 cm3 based on Coulson’s disclosure of a “glow discharge reactor” having a volume of 470 cm3. Pet. 38; Reply 15–16. In view of this, we are likewise not persuaded that Coulson discloses a power density of 85.1 W/m3, because Petitioner’s 9 Dr. Gleason confirmed that she did not perform any experiments to verify her opinions regarding Coulson’s plasma zone. Ex. 2017, 80:10–18. 10 As noted above, Petitioner presented its argument in the context of its proposed construction of plasma zone. Petitioner did not present an alternative argument supported by sufficient evidence addressing the volume of Coulson’s plasma zone based on Patent Owner’s proposed construction of plasma zone. Accordingly, we agree with Patent Owner’s assertion that we do not need to expressly construe the term plasma zone to resolve this issue. Sur-reply 1. argument that Coulson discloses this power density is based on its assertion that Coulson has a plasma zone volume of 470 cm3. Pet. 38. This finding is fatal to Petitioner’s obviousness challenge of claim 1 based on the combined teachings of Baalmann and Coulson because Coulson’s purported disclosure of using a power density of 85.1 W/m3 is an essential component of Petitioner’s obviousness challenge. An obviousness determination requires finding both “that a skilled artisan would have been motivated to combine the teachings of the prior art . . . and that the skilled artisan would have had a reasonable expectation of success in doing so.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367-68 (Fed. Cir. 2016). In attempting to establish a person of ordinary skill in the art would have had reason to combine the teachings of Baalmann and Coulson, and would have had a reasonable expectation of success in doing so, Petitioner repeatedly refers to using Coulson’s optimized reaction conditions, including power density, in Baalmann’s larger reactor. Pet. 48 (stating that a person of ordinary skill in the art “would have been motivated to maintain the same or similar reaction conditions within a larger reaction chamber that were present in Coulson’s chamber during Coulson’s reported plasma polymerization reactions, including power density and pressure, to preserve the same effective results.”), 48–49 (“That would have included motivation to maintain Coulson’s disclosed power density when scaling up to a larger reaction volume to preserve the beneficial results Coulson reported at that optimized power density.”); Reply 23 (referring to the “straightforward, compelling obviousness case set forth in the petition” that a person of ordinary skill in the art “would have expected to succeed performing Coulson’s reactions on a larger scale in view of Baalmann”); 23 (“The petition explained why a POSA would have modified Baalmann to use Coulson’s HDFDA monomer and reaction conditions to produce coatings with a reasonable expectation of success” ), 24 (stating the Petition “explained why a POSA would have expected success using known parameters from Coulson in an established large-scale apparatus”). During the oral hearing, counsel for Petitioner confirmed its obviousness positions depend on using Coulson’s power density. Tr. 20:10–21:16. Accordingly, Petitioner’s failure to demonstrate adequately that Coulson discloses or suggests a power density of 85.1 W/m3 undermines its reason to combine and reasonable expectation of success arguments. Petitioner’s argument that Baalmann discloses the claimed power” slip op. at 26
Patent outcomesUS 8,389,070 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,389,070
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.