PTAB
Advanced fields
41 decisions · 705msnewest first
  • PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

    The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

      “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

    • BurdenNot shown unpatentable

      “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

    • Obviousness (§103) › Analogous artAnalogous artOther

      “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

    Patent outcomesUS 9,421,713 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,421,713
  • PTAB · Jan 28, 2026 · IPR2024-01174 · APJ Susan L C Mitchell · IPR · Final written decision

    Claims 1–8 and 10–23 are unpatentable: the Board found claims 1–15 anticipated or obvious over the asserted grounds and claims 16–23 obvious over the Native combination.

    RulingsFinal written decision
    • Expert testimonyPetitioner expert creditedPatent owner expert discountedOther

      “argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22

    • Skill levelSkill level petitioner adoptedOther

      “Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 17 (citing Ex. 1002 ¶¶ 27–29). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications at this stage of the proceeding. PO Resp. 10. For this Decision, we adopt and apply Petitioner’s proposal above, which does not appear to be inconsistent with the level of skill reflected in the asserted prior art.” slip op. at 9

    • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

      “Patent Owner asserts that the preamble of independent claim 1, 16, and 20 reciting “a deodorant stick” is limiting” as it provides antecedent basis for the recitation of “said deodorant stick being free of an aluminum salt” for each independent claim. PO Resp. 7–10. Patent Owner also points to dependent claims 6–9 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 9. We agree. Petitioner does not provide argument to the contrary. See, e.g., Pet. 19 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick). We determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 8

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “We find that the evidence of record fails to support Patent Owner’s argument that the prior art fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate deodorant stick within the parameters of claim 1. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claim 1.” slip op. at 22

    Patent outcomesUS 11,497,706 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · Graham
    Patents in suitUS 11,497,706
  • PTAB · Nov 10, 2025 · IPR2025-00878 · APJ Carl M Defranco · IPR · Institution

    The Board instituted review of claims 1–3 and 11 after finding a reasonable likelihood that claim 1 is anticipated by Cleveland or obvious over Nakagawa.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “contentions, the cited portions of Cleveland, and the testimony of Clearwater’s expert), we find, preliminarily, that Cleveland discloses each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as anticipated by Cleveland.” slip op. at 6

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner

      “5 Clearwater argues that Cleveland qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Pet. 17. In support, Clearwater asserts that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (id. at 18) and submits claim charts to demonstrate that the Cleveland provisional provides written support for: (1) at least claim 1 of Cleveland (id. at 18–21); and (2) the subject matter relied upon in Cleveland (id. at 21–40 (citing Ex. 1006 throughout)). Based on our review of the Cleveland provisional, as well as Clearwater’s claim charts, we are persuaded that the current record demonstrates that Cleveland is prior art to the challenged patent. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1381 (Fed. Cir. 2015).” slip op. at 4

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

      “satisfies each claim element as identified above in Section I.D, i.e., elements [1.pre]–[1.6]. See id. at 22–40. Clearwater also submits annotated Figure 3 of Cleveland, reproduced below, to further illustrate the specific laminate structure of Cleveland’s coffee cup. See id. at 39.” slip op. at 5

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted

      “protective layers have “a coat weight of from 5 to 30 lbs/3000 ft2,” Clearwater submits the declaration of its expert, who explains that, because Nakagawa identifies the specific polymers and the thickness of the coat used for the plastic layers and one skilled in the art “would recognize that the disclosed polymers have a given density,” then “[w]ith these known parameters, the coat weight is easily calculated to be 23.04 lbs./ 3000 ft2 — falling squarely within the claimed range.” Pet. 53–54 (citing Ex. 1003 ¶¶ 132–133; Ex. 1008 ¶ 24; Ex. 1024, at 4). At this stage, we find that testimony credible and supported by the evidence presently of record. After reviewing the preliminary record (including Clearwater’s contentions, the cited portions of Nakagawa, and the testimony of Clearwater’s expert), we find, preliminarily, that Nakagawa discloses or otherwise suggests each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as obvious over Nakagawa. We need not decide Clearwater’s challenge of the dependent claims based on Nakagawa alone nor its challenge of claims 1–3 based on Nakagawa and Tanner. Our analysis of these challenges, in our view, is best left for trial after full development of the record.” slip op. at 8

    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
    Patents in suitUS 8,637,126
  • PTAB · Aug 13, 2025 · IPR2024-01469 · APJ Steven M Amundson · IPR · Final written decision

    Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not determined unpatentable under the asserted prior-art grounds.

    RulingsFinal written decision
    • PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner

      “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32

    • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

      “G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32

    • Skill levelOther

      “C. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the ’336 patent’s effective filing date would have had “a bachelor’s degree in mechanical engineering, electrical engineering, optics, or physics with at least three years of experience working in the design of LED lights or lighting fixtures; a master’s degree in one of the above disciplines with at least two years of experience; or equivalent experience.” Pet. 14 (citing Ex. 1004 ¶¶ 26–29). Dr. Eden’s testimony supports Petitioner’s assertion. See Ex. 1004 ¶¶ 27–28. Patent Owner “adopts for purposes of this proceeding only” Petitioner’s description of an ordinarily skilled artisan. Resp. 10 (citing Pet. 14). We adopt Petitioner’s description of an ordinarily skilled artisan because it comports with the technology and claims of the ’336 patent as” slip op. at 40

    • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner

      “Alleged Objective Indicia of Nonobviousness (i) General Principles Before reaching a conclusion about obviousness, we consider evidence concerning objective indicia of nonobviousness. See Apple, 839 F.3d at 1048. For such evidence to have substantial weight, “its proponent must establish a nexus between the evidence and the merits of the claimed invention.” ClassCo, Inc. v. Apple, Inc., 838 F.3d 1214, 1220 (Fed. Cir. 2016); see Ancora Techs., Inc. v. Roku, Inc., 140 F.4th 1351, 1361 (Fed. Cir. 2025) (noting that the Board did not err by requiring “a nexus to the challenged claims as opposed to the patent as a whole”). “[T]here is no nexus unless the evidence presented is ‘reasonably commensurate with the scope of the claims.’” ClassCo, 838 F.3d at 1220 (quoting Rambus Inc. v. Rea, 731 F.3d 1248, 1257 (Fed. Cir. 2013)). The patentee “bears the burden of showing that a nexus exists.” WMS Gaming, Inc. v. Int’l Game Tech., 184 F.3d 1339, 1359 (Fed. Cir. 1999). A rebuttable presumption of nexus arises “when the patentee shows that the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). Whether a rebuttable presumption of nexus arises “turns on the nature of the claims and the specific facts.” Teva Pharms. Int’l GmbH v. Eli Lilly & Co., 8 F.4th 1349, 1362 (Fed. Cir. 2021). The presumption analysis should consider the unclaimed features in the product tied to the objective evidence to assess their significance and impact on the correspondence between the patented invention and the product. Quanergy Sys., Inc. v. Velodyne Lidar USA, Inc., 24 F.4th 1406, 1418 (Fed. Cir. 2022). When, “for example, the patented invention is only a small component of the product tied to the objective evidence, there is no presumption of nexus.” Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1333 (Fed. Cir. 2019). Absent a presumption of nexus, the patentee may prove nexus by” slip op. at 76

    Patent outcomesUS 10,299,336 mixed
    § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,299,336
  • PTAB · Jun 10, 2025 · IPR2024-00231 · APJ Avelyn M Ross · IPR · Final written decision

    Claims 14–16, 18, 27–29, 31, and 32 were not proven unpatentable because the asserted references failed to establish the claimed airflow path or a reason to make the proposed combinations.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner’s and Patent Owner’s proposed levels of skill are similar and differ in that Petitioner’s relevant degrees and corresponding two years of experience additionally includes “industrial design” and “product design” and familiarity with “electrically powered vaporizing articles, their components or the underlying technologies” where Patent Owner requires two years of experience “designing electro-mechanical consumer products or an advanced degree.” Compare Pet. 7, with PO Resp. 2. Patent Owner alleges that “Petitioner has failed to establish unpatentability under either standard,” indicating that the level of skill in the art is not a dispositive issue. PO Resp. 3. In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’123 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’123 patent and the prior art. We note that the outcome of this Decision would be the same under Patent Owner’s proposed definition.” slip op. at 11

    • Expert testimonyPetitioner expert creditedOther

      “In this case, Mr. McAlexander meets both Petitioner’s and Patent Owner’s proposed level of skill in the art. As a result, we are persuaded Mr. McAlexander has the requisite skill and relevant expertise to offer testimony in this matter. For example, Mr. McAlexander has a Bachelor’s Degree in Electrical Engineering and far more than 2 years of experience in the electrical engineering field. Ex. 1027, 3–6, 7. In addition, Mr. McAlexander has provided expert consulting services in a wide range of technology areas involving the process and design of electro-mechanical consumer products. Ex. 1003 ¶ 5. Through one of Mr. McAlexander’s business ventures, his laboratory has “performed detailed airflow analyses, designing and constructing specialized apparatuses to emulate human breath, allowing for precise activation testing of ENDS devices.” Ex. 1043 ¶ 16. That said, a declarant’s expertise, even clothed as a skilled artisan, does not entitle a naked opinion persuasive weight. Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985). Here, Patent Owner had the opportunity to, and in fact did, thoroughly cross examine Mr. McAlexander about the purported deficiencies in his testimony. See, e.g., Exs. 2052, 2054; Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579, 595 (1993) (“Vigorous cross examination [and] presentation of contrary evidence . . . are the traditional and appropriate means of attacking shaky but admissible evidence.”). Therefore, to the extent Patent Owner credibly identifies deficiencies in Mr. McAlexander’s testimony or that testimony lacks factual support or is based on broad, conclusory assertions, we will assign appropriate weight. See Velander v. Garner, 348 F.3d 1359, 1371 (Fed. Cir. 2003) (explaining that it is within the Board’s discretion, as the trier of fact, to accord appropriate weight to the evidence presented).” slip op. at 12

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

      “Petitioner contends that the parties proposed a construction for “pressure valve,” a limitation appearing in claims 18 and 31, during the ITC investigation. Pet. 7 (citing Ex. 1001, 41:58–65). Patent Owner contends that the terms of the ’123 patent should be given their plain and ordinary meaning. PO Resp. 4. Because resolution of the issues presented in this case do not require construction of the term “pressure valve,” we do not expressly construe this claim term. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 14

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “We agree with Patent Owner. To anticipate a claim, a reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, 545 F.3d at 1369. “The requirement that the prior art elements themselves be arranged as in the claim means that the claims cannot be treated . . . as mere catalogs of separate parts, in disregard of the part-to-part relationships set forth in the claims.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Indeed, the prior art reference “must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference.” Net MoneyIN, 545 F.3d at 1371 (citation omitted). “[D]ifferences between the prior art reference and the claimed invention, however slight, invoke the question of obviousness, not anticipation.” Id.” slip op. at 20

    Patent outcomesUS 10,130,123 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,130,123
  • PTAB · Feb 28, 2025 · IPR2021-00625 · APJ Kristina M Kalan · IPR · Remand

    Claims 13, 14, and 17–27 were not shown unpatentable because Tennant did not establish that Wikey or Davies inherently disclosed the claimed microbubbles and nanobubbles.

    RulingsRemand decision
    • RemandOther

      “The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11. On September 19, 2024, we authorized the parties to file supplemental briefing, stating also that the “parties are not authorized to present new factual assertions, provide additional exhibits, or raise new arguments beyond those directed to the issues raised in the remand.” Ex. 3001. Pursuant to this authorization, Petitioner filed an Opening Brief on Remand (Paper 61; “Pet. Br. Rem.”) in support of its contentions. Patent Owner filed a Lead Brief on Remand (Paper 62; “PO Br. Rem.”) in support of its contentions. Petitioner filed a Reply Brief on Remand (Paper 66; “Pet. Reply Br. Rem.”). Patent Owner filed a Responsive Brief on Remand (Paper 65; “PO Resp. Br. Rem.”).” slip op. at 3

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable

      “Accordingly, and in line with our previous determination that “Wikey appears to disclose each limitation of claim 13 except ‘microbubbles and nanobubbles having a bubble diameter of less than 50 microns’” (Final Dec. 20), we determine that Petitioner has not demonstrated that Wikey inherently discloses microbubbles or nanobubbles. Accordingly, Petitioner has not demonstrated that Wikey discloses every limitation of claim 13.” slip op. at 56

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

      “The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11.” slip op. at 3

    Patent outcomesUS RE45,415 not shown unpatentable
    § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  • PTAB · Dec 16, 2024 · IPR2024-00977 · APJ Christopher M Kaiser · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 7–13 and 15–20 unpatentable on any asserted ground.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays.” Pet. 19. Petitioner also asserts that “[a]dditional relevant work experience can compensate for less education, and vice versa.” Id. On the record presented, Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 8. Neither party explains why the outcome of this case would be affected by the adoption of any particular proffered definition of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’606 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “view. First, as Petitioner admits, data line 6a is not connected to image signal line 101d and line 109 other than when sample hold circuit 101c connects them due to shift register 101b outputting an enabling signal. Pet. 49. This is supported by the layout of the four elements in Fujikawa’s Figure 2. Ex. 1005, Fig. 2 (depicting sample hold circuits 101c between and connecting data lines 6a and signal lines 101d). In addition, Patent Owner’s declarant, Dr. E. Fred Schubert, testifies that “two separate lines straddling circuitry are [not] one line.” Ex. 2001 ¶ 64. The dispute between the parties on this issue is largely one of claim construction: should the term “wiring line” in claim 7 be construed broadly enough to encompass a collection of lines separated by a sample hold circuit? In order to determine that Fujikawa discloses or teaches the recited wiring lines, we would need to answer this question in the affirmative. Yet, as discussed above, neither party proposes construing “wiring line,” or any other term used in the claims of the ’606 patent. Pet. 18; Prelim. Resp. 7. The failure to argue for and sufficiently support a broad construction of the term “wiring line” means that Petitioner does not show sufficiently, for purposes of supporting institution of review, that Fujikawa discloses or teaches the “wiring line” limitation of claim 7. b) Conclusion Regarding Claim 7 Based on the record presented, we determine that Petitioner has not shown that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 7 is unpatentable as anticipated by or obvious in view of Fujikawa.” slip op. at 11

    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,557,606
  • PTAB · Dec 11, 2024 · IPR2023-01056 · APJ Kimberly Mcgraw · IPR · Final written decision

    CommScope did not prove claims 1–3, 9–14, and 16–18 unpatentable; the asserted anticipation and obviousness grounds failed on the barrier tape’s conductive material extending to the lateral edges.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedOther

      “would have had a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in connection with designing, manufacturing, and testing of twisted-pair data cables,” and an “individual with a master’s degree in electrical engineering would require less industry experience (e.g., 1-2 years).” Pet. 15 (citing Ex. 1006 ¶ 12). Prior to institution, Patent Owner’s declarant asserted that a POSITA would have had at least a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in the telecommunications industry and disagreed that industry experience specifically with respect to twisted-pair data cables was necessary to qualify as having ordinary skill in the art. Ex. 2001 ¶ 26 (cited at Prelim. Resp. 22 n.6). Patent Owner stated, however, that any differences between the parties’ proposed definitions “are insubstantial and do not impact the analysis of the issues presented.” Prelim. Resp. 22 n.6. In our Decision on Institution, we adopted Petitioner’s proposal of a person of ordinary skill in the art (POSITA) as someone that “would have had a bachelor’s degree in electrical engineering and a minimum of 3-4 years of industry experience in connection with designing, manufacturing, and testing of twisted-pair data cables,” and an “individual with a master’s degree in electrical engineering would require less industry experience (e.g., 1-2 years).” Inst. Dec. 7–8. During the trial, neither party disputed our definition of a POSITA nor argued that the outcome of this case would differ based upon our adoption of any particular definition of a POSITA. See generally Reply; PO Resp. 12 n.4 (agreeing the POSITA definition does not impact analysis of issues presented). Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution.” slip op. at 10

    • Expert testimonyDecided for patent owner

      “Petitioner’s arguments are not persuasive. Mr. Cornelison’s testimony that a POSITA would understand that the tape shown in Figure 13C “has three layers aligned along the side edges” is not credible. See, e.g., Ex. 1006 ¶ 138. Mr. Cornelison’s testimony that Figure 13C is only “intended to identify and illustrate the three different layers of the multi-layer tape,” not to show the relative positions of the layers relative to each other (id. ¶ 137), is belied by his own testimony, in which he states that Figure 13C shows “metallic layer 133 extends to the front edges of dielectric layers 135 and 137 (id. ¶ 136). Additionally, neither Petitioner nor Mr. Cornelison provide persuasive evidence to support the contention that it would take “much more time and be more complex to make all three layers” in Figure 13C offset from each other or that it would be more costly to make than using the customary slitting processes. See Ex. 1006 ¶ 138. Although Mr. Cornelison provides evidence as to how the slitting process can be used to manufacture barrier tape, he does not provide any evidence to support his contention that the proposed slitting processes is in fact less expensive or complex than other methods. See Ex. 1006 ¶ 138. Indeed, Mr. Cornelison does not address the particular methods disclosed in Glew to manufacture the disclosed multi-layer tapes nor persuasively explain why these disclosed methods would be more costly or complex as compared to the “slitting” process. Ex. 1008 ¶¶ 199–201 (stating the multi-layer tapes can be manufactured in a “variety of ways” including bonding the various layers using adhesive or other bonding agents,” mechanically affixing or bonding the layers, needlepunching, thermal bonding, ultrasonic welding, or calendar bonding). We determine that this portion of Mr. Cornelison’s testimony is conclusory and unsupported and is entitled to little weight. Accordingly, Petitioner has not sufficiently shown that Glew discloses conductive material that extends to the lateral edges of the dielectric material as required by claims 1 and 18. As such, Petitioner has not shown a by a preponderance of the evidence that Glew anticipates independent claims 1 or 18 or the challenged claims that depend therefrom.” slip op. at 42

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “Thus, although the Specification does not use the term “lateral edge,” the Specification and figures of the ’030 patent make clear, that in the embodiments having a conductive layer that extends to the edges of the dielectric layers of the tape, the referred to “edge” is the edge of the “long side” of the tape that extends in the longitudinal direction. See, e.g., Ex. 1001, 7:49–51 (stating in some embodiments conductive layer 302 may not extend to the edge of tape 110), 8:1–25 (stating, inter alia, pairs 102 could electrically couple to the corresponding edge 306 resulting in increased ANEXT), 8:41–46, 10:30–36 (stating that the tape edge lies over a pair of conducts and the pair generates more ANEXT). Our construction of term “lateral edge” is supported by Roberts, which also refers to the edges of the long side of the tape extending in the longitudinal direction as the “lateral edges.” See, e.g., Ex. 1009, 2:20–24 (“a shield made from a plurality of tapes helically disposed, the lateral edges of which overlap adjacently lying tapes”), 2:42–46 (“a shield composed of a plurality of …, the lateral edges of which overlap adjacently disposed tapes”), 4:27–33 (“the plastic-coated metal foil shield (15) [FIG. 2] has lateral edges that overlap,” “the lateral edges of the shield overlapping one another”), 4:34–40 (“The lateral edges of the helically disposed tapes [of FIG. 3] overlap adjacently lying tapes.”), 5:65-75 (“the shield (15) [of FIG. 10] is made up of a plurality of tapes, the lateral edges of which overlap adjacently disposed like tapes”), Figs. 2, 3, 10. We credit Dr. Eldering’s testimony that these disclosures of Roberts shows that a POSITA would understand that a tape’s “lateral edges” are the edges running along the sides of the tape parallel to the longitudinal direction. See Ex. 2001 ¶¶ 64–65; see also Thales Visionix, Inc. v. United States, 415 F.3d 1335, 1348 (Fed. Cir. 2020) (considering whether the proposed claim construction is “consistent with the prior art’s usage of that term”).” slip op. at 19

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “contentions set forth in its Petition are insufficient to show that Cook discloses a barrier tape having a conductive material contained between two layers of dielectric material where the conductive material extends to each lateral edge of the two layers of the dielectric material, as required by claims 1 and 18, and further that the conductive material be continuous as required by claim 1. We agree with Patent Owner that Petitioner relies on multiple disparate embodiments of Cook for each of these limitations without sufficiently articulating how a single embodiment satisfies the requirements of claim 1 or 18 or articulating how the disparate embodiments may be combined to arrive at claim 1 or 18. See, e.g., PO Resp. 18–25; Pet. 18–21; see also NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008) (stating in order to establish anticipation, “it is not enough that the prior art reference . . . include multiple, distinct teachings that the artisan might somehow combine to achieve the claimed invention” and that the “reference must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference”).” slip op. at 29

    Patent outcomesUS 9,991,030 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,991,030
  • PTAB · Nov 20, 2024 · IPR2024-00887 · APJ Christopher M Kaiser · IPR · Institution

    The Board instituted IPR on claims 1–3, 7–10, 12, 13, and 15–19 on all asserted grounds, finding a reasonable likelihood that claim 12 is anticipated by LithoRec.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023). For the reasons set forth below, upon considering the briefing and the evidence of record, we determine that the information presented in the Petition establishes a reasonable likelihood that Petitioner will prevail with 1 In the Introduction and section headings of the Petition, Petitioner identifies claims 1–3, 7–9, 12, 13, and 15–19 as the challenged claims. Pet. i–ii. In the substantive content of the Petition, however, Petitioner includes claim 10 as a challenged claim as well. Id. at 34–35. respect to at least one of the challenged claims, and we institute inter partes review on all of the challenged claims based on all of the grounds identified in the Petition.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that one of ordinary skill in the art “would have had a B.S. degree in electrical engineering, materials science, chemical engineering, or an equivalent field, as well as at least 2 to 3 years of academic or industry [experience] in the recycling or processing of lithiumion batteries.” Pet. 14. On the present record, Patent Owner does not contest Petitioner’s proposed definition of a person of ordinary skill in the art. Prelim. Resp. 19. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as, on the present record, it appears consistent with the ’097 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner argues that “[n]o claim construction is needed,” because “[t]he claims are unpatentable under any reasonable interpretation.” Pet. 15. That said, Petitioner directs us to alleged definitions of several terms in the specification or prosecution history of the ’097 patent. Id. at 15–17. Patent Owner argues that “[c]laim construction is not required to deny the Petition.” Prelim. Resp. 26. Based on the present record, we agree with both parties that we need not expressly construe any claim terms at this time.6 See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

      “In order to anticipate a claimed invention, a prior art reference must enable one of ordinary skill in the art to make the invention without undue experimentation.” Impax Labs., Inc. v. Aventis Pharms., Inc., 545 F.3d 1312, 1314 (Fed. Cir. 2008). In addition, “[a]n anticipatory reference need only enable subject matter that falls within the scope of the claims at issue, nothing more.” Schering Corp. v. Geneva Pharms., 339 F.3d 1373, 1381 (Fed. Cir. 2003). slip op. at 10

    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,050,097
  • PTAB · Oct 23, 2024 · IPR2024-00676 · APJ Aaron W Moore · IPR · Institution

    The Board instituted review of claims 1–4, 7–10, 14, 16, 22–23, 25, and 27 on the asserted obviousness ground based on Krantz and Herrmann.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “combination of Krantz and Herrmann (see Pet 19–99) and find that, on the record as it now stands, Petitioner has established a reasonable likelihood that it will prevail with respect to at least one claim. As described above,” slip op. at 16

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “ordinary skill in the art “would have had a bachelor’s degree in computer science, computer engineering, or an equivalent, and two years of relevant experience in networking and network security, and related fields.” Pet. 4. Petitioner also asserts that “[l]ack of professional experience can be remedied by additional education, and vice versa.” Id.” slip op. at 10

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

      “combination of Krantz and Herrmann (see Pet 19–99) and find that, on the record as it now stands, Petitioner has established a reasonable likelihood that it will prevail with respect to at least one claim. As described above,” slip op. at 16

    • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportNot reached

      “qualifies as prior art to the ’450 patent “because the InfoExpress inventors conceived of the invention [of the ’450 patent] before the effective dates [of Krantz and Herrmann] and exercised reasonably continuous diligence in reducing the claimed inventions to practice.” Prelim. Resp. 33–45. Petitioner disagrees that the present record sufficiently shows that the inventors of the ’450 patent conceived of the invention before the effective date of Krantz or Herrmann and that the inventors exercised reasonably continuous diligence in reducing that invention to practice. See Prelim. Reply 1–7. In particular, Petitioner raises questions with respect to the independence of Patent Owner’s evidence from the inventor testimony that evidence is intended to corroborate, as well as with respect to whether the evidence offered by Patent Owner sufficiently shows conception, reduction to practice, and reasonably continuous diligence. Id. We do not think the information of record is sufficient to antedate Krantz and Herrmann such that we should deny institution of inter partes review on that basis. First, Patent Owner’s arguments rely on the testimony of inventor Stacey C. Lum, who has not yet been subject to cross-examination. See Prelim. Resp. 35–45 (citing Ex. 2003). Second, Petitioner identifies several issues where further development of the record may be helpful. For example, Patent Owner’s asserted date of conception is associated with the date of an engineering specification included in the record as Exhibit 2011. See Prelim. Resp. 35–36 (citing Ex. 2003 ¶ 12; Ex. 2011; Ex. 2012). We agree with Petitioner (see Prelim. Reply 4–5) that it is unclear, based on the present record, whether Exhibit 2011 corroborates the testimony supporting Patent Owner’s conception date given that the present record does not establish the author of Exhibit 2011. See Ex. 2003 ¶ 22 (inventor Stacey C. Lum testifying only that “InfoExpress personnel drafted EX2011”). These and other issues relating to the prior-art status of Krantz and Herrmann are, in our view, best left for trial after full development of the record.3” slip op. at 15

    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 8,677,450
Page 1 of 5
← Previous12345Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.