- First Quality Retail Services, LLC / First Quality Consumer Products, LLC et al. v. Essity Hygiene And Health ABAll claims unpatentablePTAB · May 12, 2026 · IPR2024-01487 · APJ Kristina M Kalan · IPR · Final written decision
Claims 1–5, 7, 8, 20–22, 24, and 25 are unpatentable, based on anticipation by Bergstrom and obviousness over the stated combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In the Institution Decision, we adopted Petitioner’s definition. Dec. 9–10. In its Response, Patent Owner cites to Petitioner’s definition and states that Patent Owner “applies Petitioners’ definition.” PO Resp. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’138 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner
“We begin our analysis with the language of the claims. Phillips, 415 F.3d at 1312; see also SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 874–875 (Fed. Cir. 2004) (“There is a ‘heavy presumption’ that the terms used in the claims ‘mean what they say and have the ordinary meaning that would be attributed to those words by persons skilled in the relevant art.’”). Claim 1 recites, in relevant part, “said fluid flow control structure being a layered structure comprising a non-perforated fibrous polymeric layer and a first perforated polymeric layer.” Ex. 1001, 13:62–64 (limitation [1h]). The plain language of claim 1 does not address additional properties of the perforated polymeric layer; the language of the dependent claims, however, imposes additional limitations on the properties of the perforated polymeric layer such as a particular basis weight (claim 2), a particular makeup (claim 3), a particular aperture size (claim 7), a particular open area (claim 8), and that it “is a three-dimensionally formed layer having penetrating apertures extending from a first surface of the first perforated polymeric layer towards a second surface of the first perforated polymeric layer and forming protrusions on said second surface” (claim 4). The dependent claims’ additional language indicates that the term “perforated” within the term “perforated polymeric layer” in claim 1 is not limited in the manner asserted by Patent Owner’s proposed construction.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“layer pierced through with holes or apertures,” we are persuaded that Petitioner meets its burden as to this limitation. Petitioner argues that under our construction, Bergstrom’s express disclosure of forming element 60, and Bergstrom’s explanation of the properties of forming element 60, meets the claimed “perforated polymeric layer” limitation. Pet. 38–41 (citing Ex. 1002 ¶¶ 114–117). Even under Patent Owner’s proposed construction, Petitioner argues, forming element 60 would also allow free flow of liquid bodily waste. Pet. Reply 3– 4 (citing Ex. 1021 ¶¶ 20–23). Importantly, Bergstrom expressly discloses: “suitable materials for the forming element 60 are plastic films, perforated plastic films and reinforced tissue or reinforced nonwoven materials.” Ex. 1004, 10:1–4. This express disclosure is clear. Even though the forming element 60 in Bergstrom might be “typically” liquid-impermeable (Ex. 1004, 9:24–30), that does not preclude a layer that is perforated, particularly where Bergstrom expressly discloses a perforated plastic film as one of the possibilities for forming element 60. Ex. 1004, 10:1–4. Additionally, although Patent Owner focuses on Bergstrom’s disclosure that forming element 60 is “typically liquid-impermeable” (PO Resp. 58–60; Ex. 1004, 9:24–30), we do not view Bergstrom’s use of the word “typically” as mandating that the forming element always be liquid impermeable. We agree that the word “typically” does not mean “always” and that such a reading would render “typically” superfluous. Pet. Reply. 5. We do not find any ambiguity in Bergstrom’s disclosure regarding possible use of perforated plastic films for its forming element 60; whether or not the forming element 60 provides other functions (like stiffness) does not dictate whether it may also be perforated, or be part of a fluid flow control structure. On this point, we credit Petitioner’s arguments and explanation, as supported by Dr. Pourdeyhimi’s testimony. Pet. Reply 6–7; Ex. 1021 ¶ 27–28 (“components of absorbent articles could be multifunctional”).” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“from the start” (PO Resp. 29), and that “using all or part of [Glaug’s] fluid-acquisition system in place of [Nakazawa’s] diffusion sheet would be antithetical to the teachings of both references” (id. at 35), we agree that the proposed combination of Nakazawa’s structure with the layers of Glaug is sufficiently motivated and reasonably expected to result in a successful article, for the reasons articulated by Petitioner. See, e.g., Pet. 59–65; Ex. 1002 ¶¶ 176–192. Namely, although fluid may flow in both Z directions in Nakazawa (PO Resp. 30), that does not foreclose the combination with Glaug in the manner proposed by Petitioner. See generally Ex. 1002 ¶¶ 176–192; see id. ¶ 184 (detailing the mechanics of the proposed combinations), ¶¶ 188–191 (discussing motivation to combine), ¶ 192 (discussing reasonable expectation of success). The combination can be achieved “either by adding the lower acquisition layer 64 [of Glaug] to diffusion sheet 63 [of Nakazawa], or by replacing diffusion sheet 63 [of Nakazawa] with the two-layer fluid acquisition system 34 [of Glaug],” and as persuasively explained by Dr. Pourdeyhimi, the arrangement constitutes a “fluid flow control structure.” See Ex. 1021 ¶¶ 45–47. Additionally, the diffusion sheet in Nakazawa can be made from the same material as used in Glaug, namely, AquiDry™. Id. ¶¶ 53–55; see also Tr. 17:25–18:3 (“although Glaug does not specify the name AquiDry in its disclosure, Patent Owner’s expert testified that it’s his understanding that Glaug is discussing the AquiDry material, the same material that is in Nakazawa . . . . they disclose using the same material, and Nakazawa says this material work[s]”). When asked if Patent Owner’s expert had any concerns that AquiDry was not the same as between Nakazawa and Glaug, Patent Owner’s counsel replied “They are the same, Your Honor. And we embrace that.” Tr. 46:8–12; see also id. at 58:19 (Petitioner’s counsel commenting about Patent Owner’s counsel: “they agree, AquiDry is used in both Nakazawa and Glaug”). Thus, Patent Owner’s argument that Nakazawa’s diffusion sheet and Glaug’s fluid acquisition layer have different purposes because Nakazawa’s diffusion sheet allegedly must promote fluid flow in the Z-directions, both toward and away from the body (PO Resp. 29–37; Ex. 2004 ¶¶ 26–28, 30– 35)) is not clearly supported by Nakazawa, and is also contravened by the shared disclosure of Nakazawa and Glaug as to the composition of the disputed layer. We have reviewed the complete record, including Patent Owner’s and Mr. Sheldon’s assertions that Nakazawa requires promoting fluid flow in both Z-directions (see id.), but find that Petitioner carries its burden to demonstrate that one of ordinary skill in the art would have been motivated to combine Nakazawa and Glaug with a reasonable expectation of success. On this complete record, Petitioner explains sufficiently why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, i.e., to use Glaug’s fluid acquisition system, or the lower non-perforated layer of its fluid acquisition system, in Nakazawa, and Petitioner provides well-supported reasons for doing so.” slip op. at 36
Patent outcomesUS 9,308,138 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,308,138 - Qiagen Sciences, LLC v. Tecan Genomics, Inc.All claims unpatentablePTAB · May 12, 2026 · IPR2025-00026 · APJ Georgianna W Braden · IPR · Final written decision
Claims 1–10 are unpatentable: claims 1–3 and 5–10 are anticipated by Porreca and obvious over Schmitt and McCloskey; claims 4 and 7 are also obvious over the listed Illumina combinations.
RulingsFinal written decision- Skill levelSkill level board ownDecided for patent owner
“On the initial trial record, we agreed with Patent Owner that one of ordinary skill in the art would have had experience with next generation sequencing, but were not persuaded that this would only be possible in the field of molecular biology. Instead, we found that a person of ordinary skill would have had either (1) a Ph.D. in the field of chemistry, molecular biology, or biochemistry or (2) a B.S. or M.S. degree with three to five years of experience working in any of those fields. Inst. Dec. 8. We specifically found that “[t]he person of ordinary skill would have had experience with next generation sequencing methods and a working knowledge of how those methods functioned.” Id. at 8–9. Patent Owner now submits that it does not dispute the definition of a person of ordinary skill in the art as laid out in the Institution Decision. PO Resp. 13. Reviewing the entire trial record, we maintain the same definition of a person of ordinary skill in the art and note that it is consistent with the skill level reflected in the disclosures of the ’357 patent and prior art. We further note that the skill level does not affect our analysis or our final decision.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“In the Institution Decision, the Board adopted Petitioner’s construction of the term “adaptor.” Inst. Dec. 9. Patent Owner does not dispute this construction. PO Resp. 13–14. During oral argument, Petitioner argued that claim 1 requires “an adapter to be ligated onto a target DNA, and that adapter needs to have two different sequences of DNA that are used for identification” including a “socalled identifier that's one to eight nucleotides in an indexing site.” Tr. 6:19–7:2. Patent Owner, again, did not dispute this characterization of “adaptor.” See generally Tr. Based on the entirety of the trial record, we continue to apply Petitioner’s construction of the term “adaptor,” although we note that it does not affect our analysis.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“Based on the entirety of the trial record, we do not agree with Patent Owner’s reading of either the claims or the prior art because Patent Owner takes too narrow a view of both. First, based on the plain language of Porreca, we find it uses a combination of the sequence reads of the target sequence and differentiator tag sequences to determine whether there is duplication. See Ex. 1006 ¶¶ 139–140, 143, 148, 153. All that the claim requires is that the method identifies sequence reads with identical identifier and target sequences as duplicates. Because claim 1 contains the transition “comprising,” the claim is still satisfied if the category of identified duplicate reads contains identical labels and also contains more. Patent Owner admits that the identifier and target sequence do not have to be used simultaneously. Tr. 46:16–48:4. Instead, Patent Owner challenges whether Porreca uses the required elements in combination as recited in the challenged claims. Based on the record before us, we agree with Petitioner’s position especially in view of the open-ended nature of the claims and Patent Owner’s own admission that there is no temporal requirement for the use of target sequences and differentiator tag sequences. Specifically, we find that Porreca teaches using the combination of the target sequences and the differentiator tag sequence to determine whether particular sequence reads are unique or PCR duplicates. See Ex. 1006 ¶¶ 139–140, 143, 148, 153. The use of both such sequences meet the claim limitations. This finding is consistent with the prosecution history of the ’357 patent and how the applicant and examiner interpreted the claims. See Ex. 1013, 69–70, 78–79. Second, we find the disclosure of Porreca sufficient to demonstrate to an ordinarily skilled artisan that “collapsing” is done by comparing target sequences and differentiator tag sequences. Porreca specifically explains that: after multiple reads have been collected for a given locus, it is possible that due to bias (e.g., caused by PCR amplification steps), a large fraction of the reads are derived from a single originating molecule. This would skew the population of target sequences observed, and would affect the outcome of the genotype call.” slip op. at 30
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We do not agree with Patent Owner for at least two reasons. First, Patent Owner fails to address the fact that Schmitt cites to McCloskey 2007. We find that the citation of McCloskey 2007 in Schmitt indicates that the ordinarily skilled artisan would have considered the teachings of McCloskey to be highly relevant to the teachings of Schmitt and would have considered them to be both useful in the field of sequencing. See Ex. 1005 ¶ 6. Second, Patent Owner fails to explain or even identify the purported structural differences between Schmitt and McCloskey that would prevent the teachings of McCloskey from being relevant to Schmitt. In addition, we credit the testimony of Dr. Metzker that one of ordinary skill in the art would have understood the benefits of adding a barcode to target sequences and would have looked to McCloskey and the batch-stamps it teaches because both Schmitt and McCloskey are in the same field and address the same problems. See Ex. 1003 ¶¶ 110, 114. Accordingly, we find that Petitioner has demonstrated by a preponderance of the evidence that a person of ordinary skill in the art at the critical time would have had sufficient reason to combine the teachings of Schmitt and McCloskey to arrive at challenged claim 1.” slip op. at 48
Patent outcomesUS 11,098,357 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,098,357 - Tableau Software, LLC v. Icharts LLCAll claims unpatentablePTAB · May 7, 2026 · IPR2024-01387 · APJ Iftikhar Ahmed · IPR · Final written decision
Claims 1–16 are unpatentable under the instituted obviousness grounds, including Becerra, the QlikView Manuals, and combinations with other references.
RulingsFinal written decision- ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part
“why it is trustworthy and how it archives dates by which the webpages were accessible, as this is an information resource on which librarians reasonably rely. See FED. R. EVID. 703. We agree with Petitioner that Dr. Hall-Ellis does have personal knowledge of the facts stated in the remaining testimony (e.g., what she actually downloaded from websites), and that FEDERAL RULE OF EVIDENCE 602 is inapplicable to her testimony offered as an expert. See Pet. Opp. 5–6 (citing Ex. 1030 ¶¶ 26, 29–32, 35, 37–39). We find her testimony to be relevant to the issues presented and specifically to whether the QlikView documents were publicly accessible. We also find no danger that the testimony would confuse the issues or mislead the Board or present unfair prejudice to Patent Owner. Accordingly, we deny Patent Owner’s Motion as to the remaining portion of Dr. Hall-Ellis’s declaration.” slip op. at 92
- Strike new argumentNew argument disregardedGranted
“FURTHER ORDERED that Petitioner’s Motion to Strike portions of Patent Owner’s Reply on its Motion to Exclude (Paper 32) is granted; and” slip op. at 102
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“1. Motivation to Combine Becerra and Couckuyt Petitioner argues that a person of ordinary skill in the art would have been motivated to combine the teachings of Becerra and Couckuyt because such a person would have recognized that Couckuyt discloses useful techniques of assigning data to Becerra’s charts, including assigning data to each axis. Pet. 34 (citing Ex. 1005 ¶¶ 19, 52, Fig. 5; Ex. 1003 ¶ 224). Petitioner contends that Couckuyt discloses associating data from a “spreadsheet document” with a chart, such as a “bar graph.” Id. at 35 (citing Ex. 1006, 6:1–37; Figs. 3a, 3c). below. Petitioner’s annotations to Figure 4 identify “Drop Zones” in red and “Data Fields” in Blue. Id. at 36. Petitioner contends Couckuyt discloses a “drag-and-drop user interface (DDUI) . . . associated with a data source, such as the two-dimensional data source 300,” and Figure 4 illustrates the DDUI permitting “value data fields and the characteristic data fields . . . to be dragged and dropped into drop zones.” Id. at 35–36 (citing Ex. 1006, 7:10–13). Petitioner contends that a “primary benefit of the charting DDUI is that the user can quickly change the data that is being presented in the chart,” and using Couckuyt’s techniques, a user can “quickly change the data” and see the desired effects. Id. at 36 (citing Ex. 1006, 1:18–19; Ex. 1003 ¶ 228). Petitioner contends that when Becerra’s control panel includes multiple charts, Couckuyt’s techniques would allow dragging-anddropping data from a data source to multiple charts, and would simplify the process of assigning data to multiple control panel components. Id. at 36–37 skill in the art would have also had a reasonable expectation of success combining Becerra with Couckuyt because the combination would amount to nothing more than incorporating Couckuyt’s well-known drag-and-drop techniques into Becerra’s system. Id. at 37 (citing Ex. 1003 ¶¶ 229–231). Patent Owner responds that Couckuyt focuses on selecting a data icon that corresponds to dragging and dropping data fields, not dragging and dropping data, while Becerra teaches that selecting various data ranges from the spreadsheet is desirable. PO Resp. 36–37 (citing Ex. 1004 7:48–52; Ex. 2001 ¶ 146). According to Patent Owner, a person of ordinary skill in the art would not have been motivated to merely select data fields that do not limit the selected data in any way. Id. Patent Owner further argues Becerra’s method of binding components to a spreadsheet range and extracting formulas from a spreadsheet teaches away from the multiple chart generation scheme of Couckuyt that uses drag and dropping of data fields. Id. at 37. According to Patent Owner, Couckuyt is directed to the need for a charting DDUI that can generate multiple charts at the same time and such a need does not exist in Becerra which in turn is focused on creating a control panel that is an interactive graphics simulation. Id. (citing Ex. 1004, 1:66–67, 2:5–8; Ex. 1005 ¶ 11; Ex. 2001 ¶ 148). Based on our review of the complete record, we determine that” slip op. at 31
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“2. Whether QlikView Manuals Qualify as Prior Art Petitioner argues that “the QlikView Manuals describe a well-known system and are printed publications available to the public at least by July 8, 2008.” Pet. 7–9. Petitioner offers ample evidence to demonstrate the QlikView Manuals were publicly accessible by July 8, 2008. See id. (citing Ex. 1008; Ex. 1009; Ex. 1014–1023; Ex. 1003 ¶ 129–140; Ex. 1030;11 Ex. 1068 ¶¶ 4–7; Ex. 1032; Ex. 1033). Petitioner contends in 2008, QlikView was a well-known software product sold by QlikTech International AB (“QlikTech”). Id. at 8 (citing Ex. 1003 ¶ 129; Ex. 1030 ¶ 23; Ex. 1068 ¶¶ 4–7). Petitioner asserts that QlikTech announced that QlikView version 8.50 was scheduled for release on June 30, 2008, and QlikTech’s website added the “QlikView 8.50” hyperlink by July 8, 2008. Id. (citing Ex. 1003 ¶¶ 129–131; Ex. 1022, 1; Ex. 1068 ¶ 7). Petitioner contends that, as of July 8, 2008, a person of ordinary skill in the art would have understood that they could view the QlikView Manuals in the installation package. Id. (citing Exs. 1014–1017; Ex. 1003 ¶¶ 131–132; Ex. 1068 ¶ 7). Petitioner further contends that the QlikView Manuals were also available on QlikTech’s website as of this 11 As discussed below (see infra § IV.A), we grant Patent Owner’s Motion to Exclude as to certain portions of Exhibit 1030 and do not give them any weight. However, we deny Patent Owner’s Motion as to the remaining portions of Dr. Hall-Ellis’s testimony as well as Ms. Lofton’s testimony and various other exhibits proffered by Petitioner to show public accessibility of the QlikView manuals as of July 8, 2008. QlikView 8.50 was published on July 8, 2008. Id. at 8–9 (citing Exs. 1008, 1009, 1017, 1059, 1060; Ex. 1030 ¶¶ 29, 37). In its Patent Owner Response, Patent Owner does not contest that the QlikView Manuals were published and publicly available by July 8, 2008. PO Resp. 50 n.2 (noting only that Patent Owner intends to move to exclude evidence Petitioner relies on to establish the publication date for QlikView Manuals); Tr. 45:3–19. We are persuaded that Petitioner has shown by a preponderance of the evidence that the QlikView Manuals were publicly available as of July 8, 2008.12” slip op. at 50
Patent outcomesUS 8,271,892 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,271,892 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCAll claims unpatentablePTAB · May 4, 2026 · IPR2022-00189 · APJ Sheridan K Snedden · IPR · Remand
Claim 16 is unpatentable because Slater anticipates it.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“undisputed limitations of claim 16 and find that Petitioner establishes that Slater discloses each limitation of claim 16 for the reasons provided by Petitioner. Specifically, Petitioner shows, and Patent Owner does not dispute, that Slater describes a plate with “flared hips” comprising opposing “generally parabolic wings” as recited in dependent claim 16. Pet. 28–30; Ex. 1005, Fig. 2; Ex. 1002 ¶ 106. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 28–30. Based on the foregoing, Petitioner proves by a preponderance of the evidence that Slater anticipates claim 16.” slip op. at 12
Patent outcomesUS 8,529,608 unpatentable§ 102 anticipationPatents in suitUS 8,529,608 - Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01452 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8, 9, 13, and 19 are unpatentable; claims 2–5, 11, 12, 17, and 18 were not shown unpatentable over Slater or Slater and Weaver.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, 12, 17, and 18 of the ’716 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 188–196. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 191– 196. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 18
Patent outcomesUS 9,763,716 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,763,716 - Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCAll claims unpatentablePTAB · May 4, 2026 · IPR2022-00191 · APJ Sheridan K Snedden · IPR · Remand
On remand, the Board held claims 15 and 21 unpatentable as anticipated by Slater.
RulingsRemand decision- RemandOther
“Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 381), affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 35) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1, 10, and 16 of U.S. Patent No. 9,763,716 B2 (“the ’716 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether either of dependent claims 15 and 21 is unpatentable. Stryker, slip op. at 17.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 15 and 21 and find that Petitioner establishes that Slater discloses each limitation of claims 15 and 21 for the reasons provided by Petitioner. Specifically, Petitioner shows, and Patent Owner does not dispute, that Slater describes a plate with “flared hips” comprising opposing “generally parabolic wings” as recited in dependent claims 15 and 21. Pet. 31–33; Ex. 1005, Fig. 2; Ex. 1002 ¶ 124. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 31–33. Based on the foregoing, Petitioner proves by a preponderance of the evidence that Slater anticipates claims 15 and 21.” slip op. at 13
Patent outcomesUS 9,763,716 unpatentable§ 102 anticipationPatents in suitUS 9,763,716 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCAll claims unpatentablePTAB · May 4, 2026 · IPR2022-00190 · APJ Sheridan K Snedden · IPR · Remand
On remand, the Board determined claim 15 unpatentable as anticipated by Slater because Slater discloses every limitation, including the flared hips and opposing generally parabolic wings.
RulingsRemand decision- BurdenUnpatentable
“We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claim 15 and find that Petitioner establishes that Slater discloses each limitation of claim 15 for the reasons provided by Petitioner. Specifically, Petitioner shows, and Patent Owner does not dispute, that Slater describes a plate with “flared hips” comprising opposing “generally parabolic wings” as recited in dependent claim 15. Pet. 30–32; Ex. 1005, Fig. 2; Ex. 1002 ¶ 119. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 28–30. Based on the foregoing, Petitioner proves by a preponderance of the evidence that Slater anticipates claim 15.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claim 15 and find that Petitioner establishes that Slater discloses each limitation of claim 15 for the reasons provided by Petitioner. Specifically, Petitioner shows, and Patent Owner does not dispute, that Slater describes a plate with “flared hips” comprising opposing “generally parabolic wings” as recited in dependent claim 15. Pet. 30–32; Ex. 1005, Fig. 2; Ex. 1002 ¶ 119. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 28–30. Based on the foregoing, Petitioner proves by a preponderance of the evidence that Slater anticipates claim 15.” slip op. at 13
Patent outcomesUS 9,351,776 unpatentable§ 102 anticipationPatents in suitUS 9,351,776 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01450 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8–10, 14, and 17 are unpatentable; claims 2–5, 12, and 13 were not shown unpatentable, based on anticipation by Slater and obviousness over Slater and Weaver.
RulingsRemand decision- RemandMixed
“Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 11 of U.S. Patent No. 8,529,608 B2 (“the ’608 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6, 8–10, 12–14, and 17 (the “Remanded Claims”) are similarly unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. at 14–15. We have jurisdiction under 35 U.S.C. § 6. We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Stryker Corporation and Wright Medical Technology, Inc. (collectively, “Petitioner”) and OsteoMed LLC (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Stryker, we find by a preponderance of the evidence that claims 6, 8–10, 14, and 17 are unpatentable. We also conclude that Petitioner has not demonstrated, by a preponderance of the evidence, that claims 2–5, 12, and 13 are unpatentable.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 12, and 13 of the ’608 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 37–39; Ex. 1002 ¶¶ 161–169. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 162– 163. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 37. Patent Owner raised no separate argument regarding the patentability of claims 6 and 8, instead relying solely on its argument that Slater does not anticipate independent claim 1, on which claims 6 and 8 depend. PO Resp. 46; Reply 4 (“Patent Owner does not challenge the combination of Slater and Weaver for claims 6 and 8.”). We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 6 and 8 and find that Petitioner establishes that the combination of Slater and Weaver discloses all of the limitations of claims 6 and 8, and that one of ordinary skill in the art would have been motivated to combine Slater and Weaver for the reasons provided by Petitioner. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 37–39.” slip op. at 19
Patent outcomesUS 8,529,608 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,608 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01451 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8, 9, and 13 were held unpatentable; claims 2–5, 11, and 12 were not shown unpatentable because Slater lacks the claimed central axis.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableUnpatentableMixed
“addressing the ’085 patent and by the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, and 12 of the ’776 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 169–74. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 169– 74. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 17
- RemandOther
“Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46, “FWD”) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 10 of U.S. Patent 9,351,776 B2 (“the ’776 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6 and 8, 9 and 11–13 (the “Remanded Claims”) are unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. 14– 15.” slip op. at 2
Patent outcomesUS 9,351,776 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,351,776 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Maxell, Ltd.All claims unpatentablePTAB · Apr 27, 2026 · IPR2024-00906 · APJ Frederick C Laney · IPR · Final written decision
Claims 1, 4–6, and 8–27 are unpatentable as obvious; Judge Hudalla dissented as to claim 15.
RulingsFinal written decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedDecided for patent owner
“reachable through intuitive navigation from the homepage using the descriptive titles to the reference, is sufficient to demonstrate the BT-Spec was publicly accessible. See M&K Holdings, Inc. v. Samsung Electronics Co., 985 F.3d 1376, 1381 (Fed. Cir. 2021) (“The law regarding public accessibility is not as restrictive as M&K suggests—a website’s landing page is not required to have search functionality. Instead, given the prominence of JCT-VC, the dispositive question is whether interested users of the JCT-VC website could have located Park and Zhou through reasonable diligence.”). The Bluetooth SIG website itself functioned as a well-known, organized repository that a skilled artisan would naturally consult when researching Bluetooth technology. See id. at 1382 (“The Board found that the documents in question on the meeting pages of the JCT-VC website were effectively indexed by subject matter in light of the title-search functionality and the fact that Park and Zhou featured descriptive titles. That finding supports the Board’s conclusion that Park and Zhou were publicly accessible.”).” slip op. at 39
- ExcludeMotion to exclude, deniedDenied
“IV. PATENT OWNER’S MOTION TO EXCLUDE The party moving to exclude evidence bears the burden of proof to” slip op. at 139
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“12. Conclusion Based on the complete record, we find a preponderance of the” slip op. at 115
Patent outcomesUS 11,445,241 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,445,241
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.