- PTAB · Nov 10, 2025 · IPR2025-00878 · APJ Carl M Defranco · IPR · Institution
The Board instituted review of claims 1–3 and 11 after finding a reasonable likelihood that claim 1 is anticipated by Cleveland or obvious over Nakagawa.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“contentions, the cited portions of Cleveland, and the testimony of Clearwater’s expert), we find, preliminarily, that Cleveland discloses each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as anticipated by Cleveland.” slip op. at 6
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“5 Clearwater argues that Cleveland qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Pet. 17. In support, Clearwater asserts that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (id. at 18) and submits claim charts to demonstrate that the Cleveland provisional provides written support for: (1) at least claim 1 of Cleveland (id. at 18–21); and (2) the subject matter relied upon in Cleveland (id. at 21–40 (citing Ex. 1006 throughout)). Based on our review of the Cleveland provisional, as well as Clearwater’s claim charts, we are persuaded that the current record demonstrates that Cleveland is prior art to the challenged patent. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1381 (Fed. Cir. 2015).” slip op. at 4
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“satisfies each claim element as identified above in Section I.D, i.e., elements [1.pre]–[1.6]. See id. at 22–40. Clearwater also submits annotated Figure 3 of Cleveland, reproduced below, to further illustrate the specific laminate structure of Cleveland’s coffee cup. See id. at 39.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted
“protective layers have “a coat weight of from 5 to 30 lbs/3000 ft2,” Clearwater submits the declaration of its expert, who explains that, because Nakagawa identifies the specific polymers and the thickness of the coat used for the plastic layers and one skilled in the art “would recognize that the disclosed polymers have a given density,” then “[w]ith these known parameters, the coat weight is easily calculated to be 23.04 lbs./ 3000 ft2 — falling squarely within the claimed range.” Pet. 53–54 (citing Ex. 1003 ¶¶ 132–133; Ex. 1008 ¶ 24; Ex. 1024, at 4). At this stage, we find that testimony credible and supported by the evidence presently of record. After reviewing the preliminary record (including Clearwater’s contentions, the cited portions of Nakagawa, and the testimony of Clearwater’s expert), we find, preliminarily, that Nakagawa discloses or otherwise suggests each claim element in the manner recited by claim 1. Thus, on the current record, Clearwater demonstrates a reasonable likelihood that challenged claim 1 is unpatentable as obvious over Nakagawa. We need not decide Clearwater’s challenge of the dependent claims based on Nakagawa alone nor its challenge of claims 1–3 based on Nakagawa and Tanner. Our analysis of these challenges, in our view, is best left for trial after full development of the record.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,637,126 - Luminex International Co., Ltd. / Menard, Inc. v. Signify Holdings B.V.Some claims unpatentablePTAB · Aug 13, 2025 · IPR2024-01469 · APJ Steven M Amundson · IPR · Final written decision
Claims 1–7, 9–15, and 18–20 are unpatentable; claims 8, 16, and 17 are not determined unpatentable under the asserted prior-art grounds.
RulingsFinal written decision- PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32
- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“G. Analysis 1. REAL PARTY IN INTEREST Based on the record before us and for the reasons explained below, we disagree with Patent Owner that Menard is a “real party in interest” under § 315(b). See Resp. 77–82; Sur-reply 27–28. First, the circumstances here differ materially from the circumstances in Ventex. There, two agreements defined the relationship between Ventex (the petitioner and manufacturer of Heatwave fabric) and Seirus (the alleged real party in interest and purchaser of Heatwave fabric). Ventex, IPR2017- 00651, Paper 152 at 7 & n.8. First, a 2013 Supplier Agreement “prevented Ventex from selling to Seirus competitors” and included an indemnity provision requiring Ventex to indemnify Seirus for losses arising from Ventex’s failure to perform certain obligations. Id. at 7, 14. Second, a 2016 Exclusive Manufacturing Agreement provided that Ventex would manufacture the Heatwave fabric only for Seirus in exchange for Seirus’s payment of an exclusivity fee. Id. at 7. Columbia (the patent owner) accused Seirus products incorporating the Heatwave fabric of infringing the patent at issue, and Columbia served Seirus with a complaint alleging patent infringement in 2014 more than two years before Ventex filed a petition in 2017. Id. at 5, 7. When determining that Seirus was a “real party in interest” under § 315(b), the Board reasoned that “Ventex and Seirus had a specially structured, preexisting, and well established business relationship with one another, including indemnification and exclusivity arrangements.” Ventex, IPR2017-00651, Paper 152 at 10; see id. at 12. Additionally, the Board noted that certain evidence “suggest[ed] that” slip op. at 32
- Skill levelOther
“C. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the ’336 patent’s effective filing date would have had “a bachelor’s degree in mechanical engineering, electrical engineering, optics, or physics with at least three years of experience working in the design of LED lights or lighting fixtures; a master’s degree in one of the above disciplines with at least two years of experience; or equivalent experience.” Pet. 14 (citing Ex. 1004 ¶¶ 26–29). Dr. Eden’s testimony supports Petitioner’s assertion. See Ex. 1004 ¶¶ 27–28. Patent Owner “adopts for purposes of this proceeding only” Petitioner’s description of an ordinarily skilled artisan. Resp. 10 (citing Pet. 14). We adopt Petitioner’s description of an ordinarily skilled artisan because it comports with the technology and claims of the ’336 patent as” slip op. at 40
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner
“Alleged Objective Indicia of Nonobviousness (i) General Principles Before reaching a conclusion about obviousness, we consider evidence concerning objective indicia of nonobviousness. See Apple, 839 F.3d at 1048. For such evidence to have substantial weight, “its proponent must establish a nexus between the evidence and the merits of the claimed invention.” ClassCo, Inc. v. Apple, Inc., 838 F.3d 1214, 1220 (Fed. Cir. 2016); see Ancora Techs., Inc. v. Roku, Inc., 140 F.4th 1351, 1361 (Fed. Cir. 2025) (noting that the Board did not err by requiring “a nexus to the challenged claims as opposed to the patent as a whole”). “[T]here is no nexus unless the evidence presented is ‘reasonably commensurate with the scope of the claims.’” ClassCo, 838 F.3d at 1220 (quoting Rambus Inc. v. Rea, 731 F.3d 1248, 1257 (Fed. Cir. 2013)). The patentee “bears the burden of showing that a nexus exists.” WMS Gaming, Inc. v. Int’l Game Tech., 184 F.3d 1339, 1359 (Fed. Cir. 1999). A rebuttable presumption of nexus arises “when the patentee shows that the asserted objective evidence is tied to a specific product and that product ‘embodies the claimed features, and is coextensive with them.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). Whether a rebuttable presumption of nexus arises “turns on the nature of the claims and the specific facts.” Teva Pharms. Int’l GmbH v. Eli Lilly & Co., 8 F.4th 1349, 1362 (Fed. Cir. 2021). The presumption analysis should consider the unclaimed features in the product tied to the objective evidence to assess their significance and impact on the correspondence between the patented invention and the product. Quanergy Sys., Inc. v. Velodyne Lidar USA, Inc., 24 F.4th 1406, 1418 (Fed. Cir. 2022). When, “for example, the patented invention is only a small component of the product tied to the objective evidence, there is no presumption of nexus.” Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1333 (Fed. Cir. 2019). Absent a presumption of nexus, the patentee may prove nexus by” slip op. at 76
Patent outcomesUS 10,299,336 mixed§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,299,336 - PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,686,562 - PTAB · Jun 18, 2025 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1, 2, 5–7, 9, 16, and 17, finding a reasonable likelihood that claim 1 is anticipated by Boyer.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“approximately two weeks before the statutory deadline for a final written decision, but the most recent median time-to-trial statistics for Judge Gilstrap in the Eastern District of Texas indicate that the actual trial date will likely be in July 2026, which is later than the statutory deadline to issue a final written decision in this proceeding in mid-June 2026. See Ex. 2001, 7 (median time from filing to trial of 23.2 months); Prelim. Resp. 10. Thus, we find this factor is neutral or weighs slightly against discretionary denial.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’713 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“We note that, as discussed below, we are able to determine whether to institute inter partes review of the ’713 patent without expressly construing the term “from multiple print heads or deposition lines.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). As for Patent Owner’s argument that Petitioner has failed to carry its burden to identify how the claims are to be construed, we disagree on the present record. Although Petitioner does not provide a preferred construction for the single term it proposes requires construction, Petitioner does identify which of its two alternative constructions applies to each of its asserted grounds of unpatentability. Pet. 6 (“Under the first construction, [the obviousness grounds] are applicable, and [the anticipation ground] would be excluded from the claim scope. Under the alternative construction, all of [the asserted grounds] are applicable.”). In our view, this approach does not fail to satisfy Petitioner’s burden under 37 U.S.C. § 42.104(b)(3).” slip op. at 17
Claim construction§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 9,421,713 - Njoy, LLC / Njoy Holdings, Inc. v. Juul Labs, Inc.No claims unpatentablePTAB · Jun 10, 2025 · IPR2024-00231 · APJ Avelyn M Ross · IPR · Final written decision
Claims 14–16, 18, 27–29, 31, and 32 were not proven unpatentable because the asserted references failed to establish the claimed airflow path or a reason to make the proposed combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s and Patent Owner’s proposed levels of skill are similar and differ in that Petitioner’s relevant degrees and corresponding two years of experience additionally includes “industrial design” and “product design” and familiarity with “electrically powered vaporizing articles, their components or the underlying technologies” where Patent Owner requires two years of experience “designing electro-mechanical consumer products or an advanced degree.” Compare Pet. 7, with PO Resp. 2. Patent Owner alleges that “Petitioner has failed to establish unpatentability under either standard,” indicating that the level of skill in the art is not a dispositive issue. PO Resp. 3. In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’123 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’123 patent and the prior art. We note that the outcome of this Decision would be the same under Patent Owner’s proposed definition.” slip op. at 11
- Expert testimonyPetitioner expert creditedOther
“In this case, Mr. McAlexander meets both Petitioner’s and Patent Owner’s proposed level of skill in the art. As a result, we are persuaded Mr. McAlexander has the requisite skill and relevant expertise to offer testimony in this matter. For example, Mr. McAlexander has a Bachelor’s Degree in Electrical Engineering and far more than 2 years of experience in the electrical engineering field. Ex. 1027, 3–6, 7. In addition, Mr. McAlexander has provided expert consulting services in a wide range of technology areas involving the process and design of electro-mechanical consumer products. Ex. 1003 ¶ 5. Through one of Mr. McAlexander’s business ventures, his laboratory has “performed detailed airflow analyses, designing and constructing specialized apparatuses to emulate human breath, allowing for precise activation testing of ENDS devices.” Ex. 1043 ¶ 16. That said, a declarant’s expertise, even clothed as a skilled artisan, does not entitle a naked opinion persuasive weight. Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985). Here, Patent Owner had the opportunity to, and in fact did, thoroughly cross examine Mr. McAlexander about the purported deficiencies in his testimony. See, e.g., Exs. 2052, 2054; Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579, 595 (1993) (“Vigorous cross examination [and] presentation of contrary evidence . . . are the traditional and appropriate means of attacking shaky but admissible evidence.”). Therefore, to the extent Patent Owner credibly identifies deficiencies in Mr. McAlexander’s testimony or that testimony lacks factual support or is based on broad, conclusory assertions, we will assign appropriate weight. See Velander v. Garner, 348 F.3d 1359, 1371 (Fed. Cir. 2003) (explaining that it is within the Board’s discretion, as the trier of fact, to accord appropriate weight to the evidence presented).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends that the parties proposed a construction for “pressure valve,” a limitation appearing in claims 18 and 31, during the ITC investigation. Pet. 7 (citing Ex. 1001, 41:58–65). Patent Owner contends that the terms of the ’123 patent should be given their plain and ordinary meaning. PO Resp. 4. Because resolution of the issues presented in this case do not require construction of the term “pressure valve,” we do not expressly construe this claim term. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner. To anticipate a claim, a reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, 545 F.3d at 1369. “The requirement that the prior art elements themselves be arranged as in the claim means that the claims cannot be treated . . . as mere catalogs of separate parts, in disregard of the part-to-part relationships set forth in the claims.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Indeed, the prior art reference “must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference.” Net MoneyIN, 545 F.3d at 1371 (citation omitted). “[D]ifferences between the prior art reference and the claimed invention, however slight, invoke the question of obviousness, not anticipation.” Id.” slip op. at 20
Patent outcomesUS 10,130,123 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,130,123 - PTAB · Apr 30, 2025 · IPR2024-01494 · APJ Justin T Arbes · IPR · Institution
The Board instituted review of claims 5, 6, and 9–20 on all asserted grounds after finding a reasonable likelihood that claim 5 would have been obvious over Bowen and Soukup.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Pursuant to 35 U.S.C. § 314(a), the Director may not authorize an inter partes review unless the information in the petition and preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” See 37 C.F.R. § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). For the reasons that follow, we institute an inter partes review as to claims 5, 6, and 9–20 of the ’909 patent on all grounds of unpatentability asserted with respect to those claims in the Petition.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We disagree with Patent Owner’s arguments based on the current record. Dr. Bokor testifies that “as is evident from the TMR equation, . . . lowering the resistance (barrier height) for parallel spin electrons [(i.e., Rp)] compared to antiparallel [(i.e., Rap)] improved TMRs.” Ex. 1024 ¶ 169 (citing Ex. 1035, 3273) (emphasis added). Dr. Bokor’s testimony is consistent with the TMR equation above, which has Rp as the only term in the denominator, and reflects that Rp would be lowered disproportionally, or otherwise the TMR would not have “improved.” Id. It also appears to be supported by other evidence of record. See Ex. 1035, 3273 (noting the” slip op. at 17
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable
“Finally, we note that, although Petitioner has made a sufficient showing with respect to obviousness, we are not persuaded by Petitioner’s inherency argument. See Pet. 36. Specifically, Petitioner has not established that a barrier height of 0.1–0.85 eV is necessarily present in, or the natural result of, a tunnel barrier layer having some amount of oxygen vacancy defects. See Hospira, Inc. v. Fresenius Kabi USA, LLC, 946 F.3d 1322, 1329 (Fed. Cir. 2020) (“When the prior art does not expressly disclose a claim limitation, ‘inherency may supply a missing claim limitation in an obviousness analysis.’ . . . Inherency is established in the context of obviousness when ‘the limitation at issue necessarily must be present, or the natural result of the combination of elements explicitly disclosed by the prior art.’”). Petitioner points to the ’909 patent’s statement that “[w]hen there are oxygen vacancy defects, the potential barrier height of the MgO tunnel barrier is thought to decrease (such as in the range of 0.10 to 0.85 eV; more specifically, 0.2 to 0.5 eV), which is thought to result in an increase in the tunneling current.” Ex. 1017, col. 7, ll. 19–23; see Pet. 36. Bowen, however, has “oxygen vacancy defects” in its MgO layer and “[o]xygen vacancies are naturally present in every oxide” according to Petitioner, but Bowen discloses a barrier height of 0.9 eV, which is outside the claimed range (albeit only slightly). Pet. 13, 23–24. Thus, Bowen contradicts Petitioner’s assertion that a barrier height within the claimed range of 0.1–0.85 eV is inherent when there are oxygen vacancy defects.” slip op. at 23
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner argues that at the time of the ’909 patent (2004), a person of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 18–19 (citing Ex. 1024 ¶ 25). Patent Owner applies Petitioner’s definition of the level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 17. Based on the record presented, including our review of the ’909 patent and the types of problems and solutions described in the ’909 patent and cited prior art, we agree with Petitioner’s proposed definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 9
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,968,909 - Lam Research Corp. v. Inpria Corp.All claims unpatentablePTAB · Apr 18, 2025 · IPR2024-00033 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–12 are unpatentable as anticipated by the ’888 Publication; Patent Owner’s motion to add substitute claims 13–23 is granted.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“priority issue are based on the cited disclosures of the ’867 application discussed above. Ex. 2009 ¶ 29. For the reasons discussed above, we do not view the cited disclosures as sufficiently supporting Dr. Banerjee’s conclusion that the ’867 application provides support for claim 1’s average thickness range (id.) and, therefore, give this testimony little weight. Stated somewhat differently, Dr. Banerjee’s advances an opinion (really a legal one) that is not supported by the facts and not in line with the caselaw discussed in this section (such as RAI).” slip op. at 26
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPrinted publication establishedDecided for petitioner
“priority issue are based on the cited disclosures of the ’867 application discussed above. Ex. 2009 ¶ 29. For the reasons discussed above, we do not view the cited disclosures as sufficiently supporting Dr. Banerjee’s conclusion that the ’867 application provides support for claim 1’s average thickness range (id.) and, therefore, give this testimony little weight. Stated somewhat differently, Dr. Banerjee’s advances an opinion (really a legal one) that is not supported by the facts and not in line with the caselaw discussed in this section (such as RAI).” slip op. at 26
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“d) Conclusion For the reasons discussed above, Petitioner has demonstrated by a” slip op. at 30
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“For these reasons, Patent Owner has met its burden to show by a” slip op. at 34
Patent outcomesUS 9,823,564 unpatentable§ 102 anticipationcites Phillips · KSR · Graham · NautilusPatents in suitUS 9,823,564 - PTAB · Mar 20, 2025 · IPR2024-01406 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted IPR on claims 1, 3, 4, 8–13, and 15 on all asserted grounds, finding a reasonable likelihood that Takeuchi anticipates those claims.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’202 patent. Accordingly, we institute an inter partes review of claims 1, 3, 4, 8–13, and 15 of the ’202 patent. A. Real Parties in Interest” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“or “POSITA”) would have had “a bachelor’s degree in mechanical engineering, electrical engineering, or a related field, and three to four years of experience, or a master’s degree in mechanical engineering, electrical engineering, or a related field, and one to two years of experience.” Pet. 6 (citing Ex. 1003 ¶ 13). Petitioner further contends that “[s]uch experience would include a familiarity with thermal fluid delivery devices and/or the components and underlying technology used therein, and a higher level of 1 US 5,249,586, issued Oct. 5, 1993 (Ex. 1004, “Morgan”). 2 EP 0 845 220 B1, published Jan. 26, 1998 (Ex. 1006, “Susa”). 3 US 2005/0205084 A1, published Sept. 22, 2005 (Ex. 1007, “Gupta”). 4 US 6,155,268, issued Dec. 5, 2000 (Ex. 1009, “Takeuchi”). at 6–7 (citing Ex. 1003 ¶ 13). Patent Owner states that, for purposes of the Preliminary Response, “Patent Owner maintains that Petitioners’ arguments fail even under Petitioners’ POSA definition.” Prelim. Resp. 13. On this record, we preliminarily adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’202 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). B. Claim Construction” slip op. at 6
- Prior constructionPrior construction adoptedDecided for petitioner
“term “wicked into contact” that the Board adopted in a prior inter partes review proceeding that addressed the same term in an earlier, related patent. Pet. 7 (citing IPR2020-01602, Paper 32 at 8–15 (PTAB March 30, 2022)). ‘wicked into contact’ to mean: ‘wicked into contact (1) with the heater, or (2) with an area in close proximity to, and exposed [to] the heat produced by, the heater,’” and “[t]he present Petition adopts this formal construction for purposes of this IPR proceeding.” Id. (citing IPR2020-01602, Paper 32 at 15). Patent Owner also “adopts this construction for purposes of” the Preliminary Response, and argues that “Petitioner’s grounds fail even under its proposed construction of ‘wicked into contact.’” Prelim. Resp. 13. For purposes of this Decision, we adopt the Board’s prior construction of “wicked into contact,” namely, “wicked into contact (1) with the heater, or (2) with an area in close proximity to, and exposed to the heat produced by, the heater,” which is undisputed on this record. See Philip Morris Products, S.A. v. RAI Strategic Holdings, Inc., IPR2020-01602, Paper 32 at 8–15 (PTAB March 30, 2022). C. Asserted Anticipation by Morgan” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot reached
“To establish anticipation, each and every element in a claim, arranged as recited in the claim, must be found in a single prior art reference. Net Karsten Mfg. Corp. v. Cleveland Golf Co., 242 F.3d 1376, 1383 (Fed. Cir. 2001). “A reference may anticipate inherently if a claim limitation that is not expressly disclosed is ‘necessarily present, or inherent, in the single anticipating reference.’” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012) (quoting Verizon Servs. Corp. v. Fibernet Va., Inc., 602 F.3d 1325, 1336–37 (Fed. Cir. 2010)). Based on the current record, we are not persuaded that Petitioner sufficiently establishes that Morgan discloses “a storage compartment . . . being arranged such that the liquid aerosol-forming material can be wicked into contact with the electrical resistance heater to volatilize the liquid aerosol-forming material” as recited in claim 1.” slip op. at 12
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 11,925,202 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Mar 14, 2025 · IPR2024-01449 · APJ Justin T Arbes · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1 and 2 were unpatentable under any of the four asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“inter partes review unless the information in the petition and preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” See 37 C.F.R. § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). For the reasons that follow, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 29 (citing Ex. 1024 ¶ 25). Patent Owner applies Petitioner’s definition of the level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 17. Based on the record presented, including our review of the ’463 patent and the types of problems and solutions described in the ’463 patent and cited prior art, we agree with Petitioner’s proposed definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“C. Claim Interpretation We interpret each challenged claim using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 25–26. Patent Owner does not propose interpretations of any claim terms in its Preliminary Response. We conclude that no express interpretation of any claim term is necessary to determine whether to institute an inter partes review in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (citation omitted) (emphasis added)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Further, because Bowen’s disclosed barrier height is outside the claimed range, Petitioner relies on Soukup’s purported teaching of a barrier height of “about 0.33 eV” and contends that a person of ordinary skill in the art would have been motivated to “achieve” that barrier height for the MgO barrier of Bowen’s device. Id. at 34–36. The data that Petitioner relies on from Soukup for the “about 0.33 eV” barrier height, though, was determined using the slope of an Arrhenius plot, not Simmons’ formula. Ex. 1028, 3229 (Abstract), 3231–33, Table I. In Soukup, apparent barrier heights for the samples were determined using (1) the slope of an Arrhenius plot, and (2) the zero-field intercept of the straight line logI versus V1/2 plot. Id. at 3229 (Abstract), 3230–32, Fig. 3, Table I. Reproduced below is Table I of Soukup, as annotated by Patent Owner (Prelim. Resp. 39): Annotated Table I of Soukup includes the results of analyses of sample test data, with the column highlighted in yellow showing the barrier heights obtained by a zero-field intercept method and the column highlighted in blue showing barrier heights obtained from the slope of an Arrhenius plot. See Ex. 1028, 3233; Prelim. Resp. 38–39. Dr. Bokor testifies that “Soukup disclosed that Simmons’ formula was used to approximate tunnel barrier height” and “[o]ne of skill would have understood the ‘height and the bias dependence of the insulator potential-energy barrier’ [referenced in Soukup] included the tunnel barrier height.” Ex. 1024 ¶¶ 145–147 (quoting Ex. 1028, 3229; citing Ex. 1024 ¶¶ 45–49). We do not find this testimony persuasive. Although Soukup refers to “Simmons’ model” and the Simmons 1963 paper in its “Introduction,” it does not teach any calculation using Simmons’ formula to obtain a barrier height within the claimed range. See Ex. 1028, 3229, 3236 n.1; Prelim. Resp. 63. Soukup plainly recognizes that there are methods of calculating barrier height other than Simmons’ formula, and discusses at length its calculations using two such methods: the Arrhenius plot method and the zero-field intercept method. See, e.g., Ex. 1028, 3229 (Abstract) (“These results . . . indicate a potential barrier height of about 0.72 eV when determined from the zero-field intercept of the straight line logI vs V1/2 plot and about 0.33 eV when obtained from an Arrhenius plot.”), 3232–33. Petitioner does not address whether the 0.33 eV barrier height it relies on from Soukup (determined using the Arrhenius plot method) would still be within the claimed range if calculated using Simmons’ formula. See Prelim. Resp. 63. Nor does Petitioner rely on any values from Soukup’s disclosure that would be used as the variables in Simmons’ formula—Petitioner relies solely on Bowen. See Pet. 39–42. Thus, Petitioner’s argument that Bowen and Soukup teach a barrier height within the claimed range, obtained using equation (1), is not persuasive. See id. at 34–42.” slip op. at 17
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,123,463 - Tennant Company v. Oxygenator Water Technologies, Inc.No claims unpatentablePTAB · Feb 28, 2025 · IPR2021-00625 · APJ Kristina M Kalan · IPR · Remand
Claims 13, 14, and 17–27 were not shown unpatentable because Tennant did not establish that Wikey or Davies inherently disclosed the claimed microbubbles and nanobubbles.
RulingsRemand decision- RemandOther
“The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11. On September 19, 2024, we authorized the parties to file supplemental briefing, stating also that the “parties are not authorized to present new factual assertions, provide additional exhibits, or raise new arguments beyond those directed to the issues raised in the remand.” Ex. 3001. Pursuant to this authorization, Petitioner filed an Opening Brief on Remand (Paper 61; “Pet. Br. Rem.”) in support of its contentions. Patent Owner filed a Lead Brief on Remand (Paper 62; “PO Br. Rem.”) in support of its contentions. Petitioner filed a Reply Brief on Remand (Paper 66; “Pet. Reply Br. Rem.”). Patent Owner filed a Responsive Brief on Remand (Paper 65; “PO Resp. Br. Rem.”).” slip op. at 3
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable
“Accordingly, and in line with our previous determination that “Wikey appears to disclose each limitation of claim 13 except ‘microbubbles and nanobubbles having a bubble diameter of less than 50 microns’” (Final Dec. 20), we determine that Petitioner has not demonstrated that Wikey inherently discloses microbubbles or nanobubbles. Accordingly, Petitioner has not demonstrated that Wikey discloses every limitation of claim 13.” slip op. at 56
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11.” slip op. at 3
Patent outcomesUS RE45,415 not shown unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.