- Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Resonant Systems, Inc.Some claims unpatentablePTAB · Jan 8, 2025 · IPR2023-00992 · APJ Steven M Amundson · IPR · Final written decision
Claims 1, 2, 7, 8, 11, and 17 are unpatentable; claims 3–6, 9, and 14 are not shown unpatentable, and claims 15 and 16 were disclaimed.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“B. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art include (1) the educational level of the inventor; (2) the type of problems encountered in the art; (3) prior-art solutions to those problems; (4) the rapidity with which innovations are made; (5) the sophistication of the technology; and (6) the educational level of workers active in the field. Envtl. Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–97 (Fed. Cir. 1983). Not all factors may exist in every case, and one or more of these or other factors may predominate in a particular case. Id. These factors are not exhaustive, but merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). Moreover, the prior art itself may reflect an appropriate skill level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner asserts that a person of ordinary skill in the art at the time of the alleged invention “would have had a bachelor’s degree in electrical engineering, mechanical engineering, computer science, or a similar field and two years of experience related to electronic consumer product design.” 3 The parties do not provide evidence or argument regarding objective indicia of nonobviousness. See, e.g., Pet. 9–93; Resp. 18–66. Pet. 6. Petitioner also asserts that an ordinarily skilled artisan “could have also obtained similar knowledge and experience through other means.” Id. Dr. Wolfe’s testimony supports Petitioner’s assertions. See Ex. 1003 ¶ 30. Patent Owner asserts that a person of ordinary skill in the art at the time of the alleged invention “would have had (1) a bachelor’s degree in electrical engineering, mechanical engineering, or a comparable field of study, and (2) at least two years of professional experience with electro-mechanical control systems, or other similarly relevant industry experience.” Resp. 3. Patent Owner also asserts that “[a]dditional relevant industry experience may compensate for lack of formal education or vice versa.” Id. Dr. Goossen’s testimony supports Patent Owner’s assertions. See Ex. 2008 ¶ 16.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“10. SUMMARY “[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.” Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Above, we discussed issues concerning the “component” limitations in claims 1, 3, and 4 and an ambiguity in claim 4. See supra §§ III.C.4(c), III.C.5(c), III.C.6(c), III.C.7(c), III.C.8(c), III.C.9. We determine that no other claim language requires a discussion of scope or an explicit construction to decide whether Petitioner satisfies the “preponderance of the evidence” standard for proving unpatentability. D. Alleged Obviousness over Fukumoto: Claims 1–3, 7–9, and 17 Petitioner contends that claims 1–3, 7–9, and 17 are unpatentable under § 103(a) because the claims would have been obvious over Fukumoto. See Pet. 9–35; Reply 16–22. Patent Owner disputes Petitioner’s contentions. See Resp. 18–27; Sur-reply 7–14. Below, we provide an overview of Fukumoto. Then, we consider the obviousness issues. For the reasons explained below, we agree with Petitioner that claims 1, 2, 7, and 17 are unpatentable under § 103(a) because the claims would have been obvious over Fukumoto but disagree that claims 3, 8, and 9 are unpatentable based on Fukumoto.” slip op. at 44
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) does not applyDecided for patent owner
“2. MEANS-PLUS-FUNCTION CLAIMING The patent statute provides that “[a]n element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.” 35 U.S.C. § 112 ¶ 6 (2006). The absence of the word “means” in a claim limitation creates a rebuttable presumption that § 112’s means-plus-function provision does not apply. Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc in relevant part). When a claim limitation lacks the word “means,” a party may rebut the presumption that § 112’s means-plus-function provision does not apply by demonstrating that “the claim term fails to ‘recite[] sufficiently definite structure’ or else recites ‘function without reciting sufficient structure for performing that function.’” Williamson, 792 F.3d at 1348 (alteration by the court) (quoting Watts v. XL Sys., Inc., 232 F.3d 877, 880 (Fed. Cir. 2000)). Construing a means-plus-function limitation involves two steps: first, identify the claimed function or functions; and second, determine what structure, if any, disclosed in the patent’s specification corresponds to the claimed function or functions. Williamson, 792 F.3d at 1351; see Medtronic, Inc. v. Advanced Cardiovascular Sys., Inc., 248 F.3d 1303, 1311 (Fed. Cir. 2001). For the second step, a person of ordinary skill in the art must “recognize the structure in the specification and associate it with the corresponding function in the claim.” All-Voice Computing PLC v. Nuance Commc’ns, Inc., 504 F.3d 1236, 1241 (Fed. Cir. 2007). The “duty to link or associate structure to function is the quid pro quo for the convenience” of using means-plus-function claiming. B. Braun Med., Inc., v. Abbott Lab’ys, 124 F.3d 1419, 1424 (Fed. Cir. 1997). When a limitation recites two or more functions, the specification” slip op. at 18
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“Conclusion About Obviousness/Nonobviousness For the reasons discussed above, Fukumoto teaches claim 1’s subject” slip op. at 64
Patent outcomesUS 9,369,081 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,369,081 - PTAB · Nov 14, 2024 · PGR2024-00026 · APJ Hyun J Jung · PGR · Institution
Instituted PGR on claims 1–7 and all grounds because Petitioner showed it was more likely than not that at least one challenged claim lacks written-description support.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this stage, Petitioner’s arguments, cited portions of the Specification, and supporting testimonial evidence demonstrate that it is more likely than not that claims 1–7 are unpatentable.” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateDecided for petitioner
“patent describes that “angular position transducer 78 is placed on top of swing leg pivot shaft 24” and that “pivot shaft 24 is rotationally fixed to the connector plate and duplicates the angular movements of swing leg 20 about the pivot shaft.” Ex. 1001, 12:15–16, 12:20–22, Figs. 5, 7. The ’723 patent also describes that “[a]ngular position transducer 78 is mounted inside . . . protective can 90 . . . which is bolted to hinge bracket 28 via an upright holding arm 92” and that “trigger pin 94 projects upwardly from the top surface of pivot shaft 24 and cooperates with angular position transducer 78 to generate an angular position signal.” Id. at 12:28–33, Fig. 5. These descriptions expressly convey that angular position transducer 78 is on pivot shaft 24 and mounted inside protective can 90 that is bolted to hinge bracket 28. Id. at 12:15–16, 12:20–22, 12:28–30, Figs. 5, 7; see also Prelim. Resp. 17 (describing the same embodiment shown in Figs. 5 and 7). According to Petitioner, the ’723 patent describes the pivot shaft as part of the hinge bracket, not the modular frame or swing leg. Pet. 109–110 (citing Ex. 1001, 7:42–46, 12:17–22). On the preliminary record, we agree because the cited portions of the Specification describe that a “hinge bracket is interposed between each swing leg and an associated surface of the bolsters and includes a fixed, upright pivot shaft that pivotally engages the swing leg for pivotal movements” and “pivot shaft 24 is rotationally fixed to the connector plate.” Ex. 1001, 7:42–45, 12:20–21. We also agree that “even if one were to find that the hinge bracket is part of either the modular frame or swing leg (contrary to the claims and specification treating these all as separate components), the specification would only provide written description for one of the claimed alternatives.” Pet. 110 (citing Ex. 1002 ¶ 199).” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this preliminary stage, we determine that express claim interpretation is not necessary to determine whether it is more likely than not that at least one of the claims challenged in the petition is unpatentable. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“We will also not use our discretion under § 325(d) to deny the Petition based on arguments previously presented in IPR2021-00135, because Petitioner relies on a Board determination regarding claim 8 from IPR2021- 00136, not arguments previously made for claim 1 in IPR2021-00135. Pet. 111–115, 119; Prelim. Resp. 8–9; Prelim. Sur-reply 5. Furthermore, we determined the effective filing date of claim 8 of the ’571 patent without deciding, that other challenged claims, such as claim 1, were entitled to their earliest possible effective filing date. See Godberson-Smith, Paper 61 at 11, 12.” slip op. at 12
Claim construction§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,772,723 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45
Patent outcomesUS 10,994,923 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,994,923 - Viking Drill & Tool, Inc. v. Hongjia WangAll claims unpatentablePTAB · Jul 5, 2024 · IPR2023-00474 · APJ William V Saindon · IPR · Final written decision
Claims 1, 2, 5, 7, 8, 12–15, 18, 19, and 22 are unpatentable as obvious over Zhou, Bannister, Gentry, and Durfee; the Board did not reach the additional Welty-based grounds.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedOther
“known that a spiral flute helps to lift swarf away from the cutting surface. Pet. 67 (citing Ex. 1004 ¶¶ 201–202). The testimony of Petitioner’s expert states that a person of ordinary skill in the art would have known that “the spiral shape of the flute side walls was desirable since it helps to lift chips, or swarf, away from the cutting surface and evacuate it from the hole being cut.” Ex. 1004 ¶ 202. This makes intuitive sense, as a wall perpendicular to the surface would push accumulated chips along, whereas the wedge shape of the spiral will lift them away from the cutting surface. According to Petitioner, a person of ordinary skill in the art would have been motivated to modify Zhou’s flute to arrange the cutting edges such that they, as a whole, have a spiral shape in order to achieve these chip-lifting benefits. Thus, we find that a person of ordinary skill in the art at the time of the invention had a reason to include the known feature of cutting tips that spiraled around the cone portion, in order to achieve the benefit of providing better chip removal.” slip op. at 27
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A [person of ordinary skill in the art (POSA)] with respect to the ’583 patent would have been an individual educated in mechanical engineering with a bachelor’s degree and at least one or two years of experience in the development of drill bits, or an associate’s degree and at least five years of experience in the development of drill bits. A POSA would typically work in a team with machinists and would be aware of developments in the field of machine tools, particularly drill bits, for example by attending trade shows, and by reading patents and trade journals.” slip op. at 17
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“formed sequentially and spirally on a cone portion exterior” of the twist drill. The parties agreed to construe the cutting blade groups being “formed spirally” as meaning that the cutting blade groups are slanted with respect to the rotational axis, i.e., are not perpendicular to the rotational axis. The parties have agreed that being “formed spirally” is met by axial relief. Pet. 23; Tr. 77:9–12. We adopted this construction. slip op. at 18
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“2. Construction of Remaining Terms We determine that no further terms require construction. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 19
Patent outcomesUS 11,007,583 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,007,583 - PTAB · May 20, 2024 · IPR2024-00114 · APJ Jon M Jurgovan · IPR · Institution
The Board instituted IPR on claims 1–8 on all asserted grounds, finding a reasonable likelihood that at least one claim would have been obvious over DiPerna964 and Strack.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“We determine below that Fintiv factors 1–5 do not favor discretionary denial. Thus, we do not reach the issue of whether the merits are compelling. CommScope Techs. LLC v. Dali Wireless, Inc., IPR2022- 01242, Paper 23 at 4–5 (PTAB Feb. 27, 2023) (precedential) (Board must first address Fintiv factors 1–5, and should engage the compelling merits question only if that analysis favors discretionary denial) (“CommScope”). 7. Balancing the Fintiv Factors Weighing against exercising our discretion to deny institution is factor 3 involving the parties’ limited investment and lack of substantive orders in the District Court litigation. Factor 4 concerning the limited overlap of the issues in the two cases also weighs against discretionary denial. Only factor 5, that Petitioner and the defendant in the District Court litigation are the same party, weighs in favor of discretionary denial. Factor 1 concerning the absence of a stay in the District Court litigation, and factor 2 concerning the close proximity between the start of trial in the District Court litigation and the estimated deadline for the final written decision, are neutral on the facts of this case. We therefore determine that the balance of factors 1–5 weighs against discretionary denial. Accordingly, we do not consider the issue of whether compelling merits have been shown under factor 6. See CommScope, Paper 23 at 4–5.2” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Pet. 9 (citing Ex. 1006, 23) (emphasis added). From this passage, we understand the “safety” switch to be “separate” from the panic button, not a part of it. This understanding is reinforced by claim 7 which depends from claim 1 and recites that the mobile device “further compris[es] a safety switch,” meaning it is a separate element from the panic button. Ex. 1001, 9:3–4. Thus, moving the safety switch into position readies the panic button, which is not the same as the panic button readying itself to perform functions in claims 1–8 of the ’404 patent. Patent Owner does not sufficiently address this issue in its assertions. See Prelim. Resp. 5–7. Patent Owner’s reliance on disclosures elsewhere in the ’404 patent is likewise not persuasive. Prelim. Resp. 5–6. For example, the ’353 application mentions “ready” in relation to using a self-defense mechanism such as pepper spray, which has not been shown to be related to the panic button. Ex. 1006, 5, 9–10. Although Patent Owner relies on the ’353 application’s description of voice activation using a codeword, voice activation does not ready the panic button for activation to perform functions, but actually activates the panic button to perform those functions. Prelim. Resp. 6 (citing Ex. 1006, 17). Petitioner thus met its burden here to demonstrate that claims 1–8 of the ’404 patent lack written description support for a panic button adapted to “ready itself” to perform the recited functions because the limitation is not present in the ’353 application to which the ’404 patent claims priority. Pet. 8–10. The burden of production thus shifted to Patent Owner to demonstrate that the ’353 application has written description support for this limitation, which it has not done on this record. Prelim. Resp. 5–7.” slip op. at 17
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“of the proceeding, we are persuaded that Petitioner has demonstrated a reasonable likelihood of prevailing on its assertions that at least one of claims 1–8 of the ’404 patent would have been obvious under 35 U.S.C. § 103 based on the ground set forth in the Petition. Accordingly, we institute trial for all challenged claims on all grounds asserted by Petitioner. See SAS Institute Inc. v. Iancu, 138 S. Ct. 1348 (2018). Our factual findings, conclusions of law, and determinations at this stage of the proceeding are preliminary, and based on the evidentiary record developed thus far. At this stage of the proceeding, we have not made a final determination with respect to the patentability of the challenged claims or to the construction of any claim term. V. ORDER For the foregoing reasons, it is ORDERED that, pursuant to 35 U.S.C. § 314(a), an inter partes review of claims 1–8 of the ’404 patent is hereby instituted on all challenges to patentability set forth in the Petition; and” slip op. at 31
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner has shown sufficiently that a POSITA would have combined DiPerna964 and Strack with a reasonable expectation of success. Pet. 16–18. DiPerna964 and Strack are directed to similar mobile devices for use in security and emergency situations. Id. at 16–17. Petitioner demonstrates sufficiently that a POSITA would have regarded Strack’s arming and timer technique as an improvement that would have been useful with DiPerna964’s mobile device (at least in some circumstances) to provide the user with additional time to evaluate whether triggering the 911 call is warranted. Id. at 17–18. This amounts to the use of a known technique to improve similar devices in the same way, which is a recognized rationale for combining prior art references. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 401, 417 (2007). Accordingly, on this record, Petitioner has presented a reasonable likelihood that a POSITA would have combined DiPerna964 and Strack with a reasonable expectation of success. Pet. 16–18.” slip op. at 22
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,265,404 - Crusoe Energy Systems, LLC v. Upstream Data Inc.Institution deniedPTAB · Mar 29, 2024 · PGR2023-00052 · APJ Matthew S Meyers · PGR · Institution
Institution was denied because Petitioner did not show it was more likely than not that claims 1–41 were unpatentable under any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 324 (2018); 37 C.F.R. § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). Section 324(a) provides that a post-grant review may not be instituted “unless . . . the information presented in the petition . . . , if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Upon considering the Petition, Preliminary Response, and the cited evidence, we conclude that Petitioner has not satisfied its burden under 35 U.S.C. § 324 to show that it is more likely than not that claim 1 is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner disagrees with Petitioner’s articulation of the level of ordinary skill in the art, but does not offer a definition of its own. Prelim. Resp. 5. According to Patent Owner, “[t]his Petition and related declaration propose two alternative levels of ordinary skill in the art, where the second alternative does not require any formal education or any experience in the field of oil or gas production.” Id. While Patent Owner disagrees with Petitioner’s characterization of the level of ordinary skill in the art, Patent Owner does not explain how a different level of skill is likely to alter Petitioner’s analysis. Instead, Patent Owner contends that it “applied Petitioner’s articulation and confirmed the analysis detailed below would not change based on disagreements over the level of ordinary skill in the art.” Id. (citing Ex. 2101 ¶¶ 16–17). 8 To the extent necessary, and for purposes of this Decision, we accept Petitioner’s statement on the level of skill in the art. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007) (listing the type of problems encountered in the art, prior art solutions to those problems, and the sophistication of the technology as factors that may be considered in determining the level of ordinary skill in the art). The prior art itself may be sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima, 261 F.3d at 1355 (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Because the meanings of the claim terms “blockchain mining devices,” “mining processor,” and “adapted to mine transactions” are inextricably linked with Petitioner’s indefiniteness grounds, we will address the meaning of those terms in the context of the parties’ arguments to the extent necessary to resolve the controversy as set forth below in Section III.C. Similarly, we will address the parties’ arguments regarding the disputed means-plus-function limitations in our discussion of 35 U.S.C. § 112(f) as set forth below in Section III.E. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Disclosure Requirements (§112) › Definiteness (Nautilus)Not shown unpatentable
“To satisfy the definiteness requirement of § 112(b), a patent’s claims must, when “viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable certainty.” Nautilus, 572 U.S. at 910. We are not persuaded that the Petition shows that it is more likely than not that Petitioner would prevail in demonstrating that the term “blockchain mining devices,” as recited by independent claims 1 and 24, is indefinite. As an initial matter, we agree with Patent Owner that “Petitioner’s indefiniteness theory is flawed because its ‘alternative interpretations’ are of its incorrect claim construction rather than the claim language in view of the specification as required by Nautilus.” Prelim. Resp. 13. We find the Specification informs, with reasonable certainty, those skilled in the art about the meaning of the term “blockchain mining devices.” The 18 Specification informs us that “each blockchain mining device 12 may be composed of suitable components. The blockchain mining device 12 may have a network interface, such as network equipment 88, and one or a plurality of mining processors 92 (92A-92E for example).” Ex. 1001, 15:21–25. And, claim 1 recites that the “blockchain mining devices [are] connected to the generator” and “each have a mining processor and are connected to a network interface.” Id. at 19:59–62. Thus, reading the term “blockchain mining devices” in light of the language of the claim and the Specification, an ordinarily skilled artisan would have understood “blockchain mining devices” to mean a device composed of, for example, a network interface and one or more processors. Id. at 15:21–25, 19:59–62.” slip op. at 18
Claim construction§ 112 disclosureDiscretionary denialPatents in suitUS 11,574,372 - Medit Corporation v. 3shape A/SInstitutedPTAB · Mar 28, 2024 · IPR2023-01315 · APJ James J Mayberry · IPR · Institution
The Board instituted review of claims 1, 2, 4, 5, 9, 10, and 12–17 on all asserted grounds because the Petition showed a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“For institution, “[t]he ‘reasonable likelihood’ standard is a somewhat flexible standard that allows the Board room to exercise judgment.” Patent Trial and Appeal Board Consolidated Trial Practice Guide 53 (Nov. 2019), available at https://www.uspto.gov/TrialPracticeGuideConsolidated.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction In inter partes reviews, we interpret a claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under this standard, we construe the claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id.” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency foundInstituted
“We understand Petitioner to rely on an inherent disclosure of the certainty score in contending that Korten anticipates claim 1. See, e.g., ABS Glob., Inc. v. Cytonome/St, LLC, 84 F.4th 1034, 1042–43 (Fed. Cir. 2023) (“A claim is anticipated if ‘each and every element as set forth in the claim is found, either expressly or inherently, in a single prior art reference.’” (emphasis added). And inherency is a high standard. See, e.g., Cont’l Can Co. USA v. Monsanto Co., 948 F.2d 1264, 1269 (Fed. Cir. 1991) (“Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient. If, however, the disclosure is sufficient to show that the natural result flowing from the operation as taught would result in the performance of the questioned function, it seems to be well settled that the disclosure should be regarded as sufficient.”). We determine, on the limited record before us, that Petitioner has made a sufficient showing for institution that a certainty score would naturally flow from Korten’s validity and error determinations. Accordingly, upon review of the information in the Petition and corresponding evidence, including Patent Owner’s counter arguments, we determine Petitioner has sufficiently demonstrated, at this stage of the proceeding, that Korten discloses the subject matter of limitation 1[c].” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot reached
“teachings of Korten with either Lehmann I or Lehmann II. Prelim. Resp. 22–26, 29 (referencing arguments for Ground 2), 35–36 (referencing arguments for Ground 2 directed to motivation to combine references). Patent Owner argues that, contrary to Petitioner’s assertion, the technology of Korten does not overlap with Lehmann II. Id. at 23. Specifically, Patent Owner argues that Petitioner and Dr. Foroosh fail to address how a person having ordinary skill in the art could have successfully combined the two-dimensional imaging of Lehmann II with the three-dimensional imaging of Korten. See id.; see, e.g., Pet. 31 (“Lehmann II is directed towards the analysis of [two-dimensional] images, whereas Korten is directed towards rendering and displaying [three-dimensional] models.”). Patent Owner argues that Petitioner should have been aware of this issue given the Board’s prior decision denying institution in IPR2023-00400. Prelim. Resp. 23. Patent Owner then itemizes a list of technical challenges with respect to combining a two-dimensional system with a three-dimensional system. Id. at 24. These challenges include that Petitioner does not explain “how one might associate a Z-coordinate of Korten with the color data obtained by the Lehmann II camera,” how a person having ordinary skill in the art “would have Korten’s processor align the [two-dimensional] color image areas obtained by the Lehmann II camera with the [three-dimensional] entity previously created by Korten, and then provide color values to the entity at aligned X-Y-Z points,” and “how to implement Lehmann II’s [two-dimensional] image into Korten’s [three-dimensional] model.” Id.; see also id. at 24–26 (discussing difficulties in using spectrophotometers to collect color data and associating two-dimensional color data with three-dimensional representations). Petitioner, concentrating on Lehmann II’s best fit technology, contends that “[a]lthough Lehmann II is directed towards the analysis of [two-dimensional] images, whereas Korten is directed towards rendering and displaying [three-dimensional] models, this difference is immaterial as it relates to determining the certainty score of the selected tooth shade value.” Pet. 31 (referencing Ex. 1015 ¶ 141); cf. Ex. 1015 ¶ 141 (providing the same testimony as is in the Petition). We have reviewed Patent Owner’s argument and determine, on the limited record before us, that Patent Owner identifies a weakness in Petitioner’s position. Petitioner’s contentions concerning motivation to combine Korten and Lehmann II seem to focus on a motivation for using Lehmann’s teachings of the subject matter of limitation 1[c], and does not address Petitioner’s reliance on Lehmann II for the subject matter of limitation 1[b], which recites the step of “determining a tooth shade value for at least one point on the tooth based on the texture data of the corresponding point of the digital 3D representation and on known texture values of one or more reference tooth shade values.” See Pet. 30 (mapping the requirements of limitation 1[b] to disclosures in Lehmann II); Ex. 1001, 21:33–37 (providing limitation 1[b]). Limitation 1[b] seems to require implementing teachings concerning two-dimensional color data from Lehmann II with three-dimensional color data collected at the step of limitation 1[a] by Korten’s system. As such, Petitioner’s reasoning may not be adequately supported by a rational underpinning. Cf. KSR Int’l Co., 550 U.S. at 418 (stating that, to facilitate the analysis of an obviousness position, the proponent should provide “some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness”). The parties may develop the record concerning this dispute at trial.” slip op. at 30
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 10,695,151 - Advanced Lighting Concepts LLC v. Mate LLC.Institution deniedPTAB · Feb 13, 2024 · IPR2023-01257 · APJ James J Mayberry · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–3, 5, 7, 13, 15, or 21 unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“provides that an inter partes review may not be instituted unless the information presented in the Petition shows that “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314; see also 37 C.F.R § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). For the reasons that follow, we do not institute inter partes review of” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“art depicted in Figure 5 (relied upon for claim element 1(b)) either relates to or can be combined with Shteynberg’s discussion of its Figure 10 embodiment depicting capacitor 345 (relied upon for claim element 1(d)). For a prior art reference to anticipate a claim, it “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as in the claim.’” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). For example, in Net MoneyIN, the Federal Circuit held that an “Internet payment system” was not anticipated by a prior art reference that disclosed all the components of the invention, because the reference disclosed two separate payment protocols, each of which contained only a subset of the components claimed in the patent at issue. Id. at 1371. “[T]he [prior art] reference must clearly and unequivocally disclose the claimed [invention] or direct those skilled in the art to the [invention] without any need for picking, choosing, and combining various disclosures not directly related to each other by the teachings of the cited reference.” Id. at 1371 (citation omitted). Here, Petitioner relies upon two disparate disclosures without any indication as to how these disclosures could be combined. Second, Petitioner has not sufficiently shown that capacitor 345 functions as an inrush current limit or that Shteynberg discloses a “power factor correction (PFC) boost connected to the inrush current limit” as required by claim element 1(d). Petitioner and its declarant have clearly stated that a person having ordinary skill in the art “would readily understand that using a resistor in series with a capacitor to limit inrush current as described in Shteynberg is analogous to the inrush current limit of the ‘446 [p]atent.” Pet. 17 (emphasis added); Ex. 1002 ¶ 57. Neither Petitioner nor its declarant make any persuasive argument that a capacitor only, such as capacitor 345, can constitute an inrush current limit. Indeed, Mr. McAlexander provides no testimony that a capacitor alone can constitute an inrush current limit, let alone that Shteynberg discloses an inrush current limit that is connected to power factor correction (PFC) boost as required by claim element 1(d). See Ex. 1002 ¶¶ 53–61 (providing testimony that Shteynberg anticipates claim 1 but not discussing the inrush current limit of claim element 1(d)). Indeed, Petitioner does not include any citations to Mr. McAlexander’s declaration to support its contention that Shteynberg discloses an inrush current limit as required by claim element 1(d). See Pet. 19–22. Thus, Petitioner has not provided persuasive evidence or argument that Shteynberg’s Figure 10 discloses an inrush current limit, let alone an inrush current limit that is connected to a power factor correction (PFC) boost. As noted above, Petitioner has provided no persuasive argument as to how Shteynberg’s disclosures regarding its discussion of the resistor in series with a capacitor shown in prior art Figure 5 can be combined with Shteynberg’s disclosures regarding its inventive embodiment of Figure 10. Thus, we find that Petitioner fails to demonstrate a reasonable likelihood that Shteynberg discloses the recited inrush current limit as required by claim 1.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Skill levelSkill level petitioner adoptedDecided for petitioner
“the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Petitioner’s declarant, Mr. McAlexander, testifies that a person having ordinary skill in the art (“POSITA”) to which the ’446 patent pertains, would have “at least a bachelor’s degree in electrical engineering, computer science, or a related field and significant experience with power regulation devices, like LED drivers and dimmers.” Ex. 1002 ¶ 31. Patent Owner, having waived its Preliminary Response, does not contest Petitioner’s articulation of the level of skill in the art. Paper 7. We regard Petitioner’s definition as consistent with the prior art before us and the skill reflected in the Specification of the ’601 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art may reflect an appropriate level of skill). Thus, for the purpose of this Decision, we apply Mr. McAlexander’s definition.” slip op. at 9
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,525,446 - Advanced Lighting Concepts LLC v. Mate LLCInstitution deniedPTAB · Feb 13, 2024 · IPR2023-01259 · APJ Kristina M Kalan · IPR · Institution
The Board denied institution because Petitioner failed to show a reasonable likelihood that claims 1, 2, 5, 10, 12, or 13 were unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“To institute inter partes review, we must determine that the information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon considering the Petition and the evidence of record, we determine that Petitioner has not shown a reasonable likelihood that it would prevail in showing the unpatentability of at least one of the claims challenged in the Petition. Accordingly, we do not institute inter partes review.” slip op. at 2
- BurdenDenied
“comports with the standard for anticipation. Under the applicable standard for anticipation, neither Petitioner nor its declarant provides persuasive analysis that would show that one skilled in the art would have reasonably understood or inferred from Zudrell-Koch that its input voltage pin discloses the claimed power limit. Eli Lilly, 849 F.3d at 1074–1075. Mr. McAlexander testifies: “As discussed above, a POSITA would understand that the input voltage pin is the power limiter that receives power from the power circuit.” Ex. 1002 ¶ 58. Mr. McAlexander cites no evidence in paragraph 58. Regarding the “As discussed above” portion of paragraph 58, the only previous paragraph cited by Petitioner in connection with its limitation 1(b) argument is paragraph 57, in which Mr. McAlexander states that “IC power-supply pins denote voltage and current supply terminals in electric, electronics engineering, and in integrated circuit design.” Id. ¶ 57. Mr. McAlexander, however, provides no citation in support of this statement and does not provide any clarification if or how IC power-supply pins relate to the input voltage pin discussed in Zudrell-Koch. Id. The only support in paragraph 57 is a summary of a short website page titled “Digital Input,” which provides: “Digital input is where a pin will detect the presence of a voltage level that is either ‘high’ or ‘low,’” and which discusses the topic of” slip op. at 15
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“comports with the standard for anticipation. Under the applicable standard for anticipation, neither Petitioner nor its declarant provides persuasive analysis that would show that one skilled in the art would have reasonably understood or inferred from Zudrell-Koch that its input voltage pin discloses the claimed power limit. Eli Lilly, 849 F.3d at 1074–1075. Mr. McAlexander testifies: “As discussed above, a POSITA would understand that the input voltage pin is the power limiter that receives power from the power circuit.” Ex. 1002 ¶ 58. Mr. McAlexander cites no evidence in paragraph 58. Regarding the “As discussed above” portion of paragraph 58, the only previous paragraph cited by Petitioner in connection with its limitation 1(b) argument is paragraph 57, in which Mr. McAlexander states that “IC power-supply pins denote voltage and current supply terminals in electric, electronics engineering, and in integrated circuit design.” Id. ¶ 57. Mr. McAlexander, however, provides no citation in support of this statement and does not provide any clarification if or how IC power-supply pins relate to the input voltage pin discussed in Zudrell-Koch. Id. The only support in paragraph 57 is a summary of a short website page titled “Digital Input,” which provides: “Digital input is where a pin will detect the presence of a voltage level that is either ‘high’ or ‘low,’” and which discusses the topic of” slip op. at 15
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Petitioner’s obviousness grounds do not cure the deficiency in Petitioner’s argument and evidence about whether Zudrell-Koch discloses every element of claim 1. Here, in its obviousness grounds, Petitioner relies on the same reasoning as it presents for anticipation and has not provided any argument or evidence as to why Zudrell-Koch might disclose or suggest the limitations of claim 1 under an obviousness standard. Nor do Petitioner’s arguments present any reasoning as to why Zhdanau or Veskovic might disclose or suggest the limitations of claim 1 under an obviousness standard. On this record, Petitioner’s obviousness arguments fail to meet Petitioner’s burden of demonstrating that the prior art discloses or suggests every element of the challenged claims. For the foregoing reasons, Petitioner has not established a reasonable likelihood of prevailing in showing obviousness of claims 12 and 13 by Zudrell-Koch, Zhdanau, and Veskovic.” slip op. at 27
§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,591,713
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.