- Luxottica Of America Inc. v. E-Vision Optics, LLCSome claims unpatentablePTAB · Dec 23, 2025 · IPR2024-01030 · APJ Richard H Marschall · IPR · Final written decision
Claims 1–20, 22–31, and 33–37 are unpatentable; claims 21 and 32 were not shown unpatentable, principally because the proposed combinations failed to establish motivation to combine or the required airtight seal.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“We find that the proposals from the parties substantially overlap, such that it remains unclear whether any substantive difference exists. Notably, neither party argues that the minor differences in the proposals lead to a different outcome on any issues in this proceeding. Based on our review of the proposals, we apply Patent Owner’s proposal because it is consistent with the problems and solutions disclosed in the ’483 patent and prior art of record. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). The outcome of the issues addressed in this Decision would not change if we applied Petitioner’s proposal.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“hermetically sealed” module does not encompass waterproof modules that are not airtight. First, as Petitioner admits, as a general matter, “[s]omething that is hermetically sealed is sealed so as to be airtight.” Pet. 28 (citing Ex. 1002 ¶ 103; Ex. 1010, 269); PO Sur-reply 16. Petitioner later tries to argue that the specification puts a different spin on this meaning, but still acknowledges that “[o]utside the context of the ’483 patent, a hermetic seal is sometimes equated with an airtight seal.” See Pet. Post-hearing 2–3 (citing Ex. 1002 ¶ 103; Ex. 1010, 269). Based on our review of the record, the “ordinary meaning” of “hermetically sealed” means “airtight,” and, as noted above, “airtight” is not the same thing as “waterproof.” Second, the claims support Patent Owner’s position by including dependent claims that separately claim a “hermetically sealed” module (claims 13 and 32) and a “waterproof” module (claims 15 and 34), strongly suggesting that the terms have a different scope to avoid rendering some claims redundant. See Ex. 1001, 11: 65–66, 12:3–4, 12:52–53, 12:55–56. Petitioner argues in its Post-hearing brief that claims requiring waterproof modules are “a narrower species” of hermetic seal, but fails to explain how hermetic, airtight, and waterproof seals would not fall within the scope of both claims using its approach. Pet. Post-hearing Reply 2. Petitioner’s earlier argument in its Reply also seems to cut against this position by asserting that the specification “treats hermitically sealing as conventional and equivalent to waterproofing,” with different dependent claims directed to two allegedly “equivalent” terms making little sense. Pet. Reply 14 (emphasis added). The most natural reading of the claim language suggests that “hermetically sealed” means airtight, and does not encompass modules that are waterproof but not airtight. Third, while the specification does not define “hermetically sealed” and uses “waterproof” and “hermetically sealed” in similar contexts, it does not suggest that “hermetically sealed” does not require an airtight seal consistent with its ordinary meaning. See Pet. Reply 14–15 (citing Ex. 1001, 6:47–53, 9:15–18, 10:47–50). Instead, the specification states that hermetic seals prevent water from contacting electronics, which remains consistent with Patent Owner’s position because airtight hermetic seals are also waterproof. See Ex. 1001, 6:47–53, 9:15–18. The specification also states that “[t]he module preferably houses any of the aforementioned electrical components in a substantially water-proof and wear resistant/moisture resistant environment and is preferably hermetically sealed.” Id. at 10:47–50 (emphasis added). This passage supports Patent Owner’s position by suggesting that the preferable “hermetically sealed” module goes beyond mere water resistance. See PO Sur-reply 16–17. slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“2. Petitioner’s Anticipation Arguments and Evidence Petitioner argues that Howell-596 discloses every limitation of claims 1, 9, 10, 14, 15, and 18, and points to specific portions of Howell-596 and expert testimony to support its arguments. See Pet. 10–20 (citing Ex. 1002; Ex. 1003). We have reviewed the evidence and arguments of record and find that Petitioner has shown, by a preponderance of the evidence, that the limitations in claims 1, 9, 10, 14, 15, and 18 are disclosed by Howell-596 for the reasons set forth in the Petition, which we adopt as our own. See id.11 Accordingly, we find that Petitioner has established, by a preponderance of the evidence, that Howell-596 anticipates claims 1, 9, 10, 14, 15, and 18.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Based on these undisputed points and the parties’ arguments, we agree with Patent Owner that Petitioner fails to establish that a POSITA would have been motivated to locate Howell-596’s module housing 1700, which contains its UV detection system 1500, behind a user’s ear. Petitioner never squarely addresses the fact that placing Howell-596’s UV detection system behind a user’s ear would negatively impact its performance. Pet. 31–33; Pet. Reply 17–22. As a result, even if we accept Petitioner’s arguments and evidence as to the various advantages when placing electronics behind a user’s ear, it fails to establish a motivation to combine that requires placing Howell-596’s module housing 1700, and therefore its UV detection system, behind a user’s ear. Petitioner never acknowledges the readily apparent disadvantages of placing a UV detection system behind the ear, where it may not work at all. See Pet. 31–33. Nor does Petitioner argue that, in its combination, adjustments would be made to ensure accurate operation of Howell-596’s UV detection system. See id. Similarly, Petitioner notes that both Howell-596 and Howell-833 disclose UV sensors behind the ear of a user, but those teachings do not establish that placing Howell-596’s module behind the ear would ensure proper operation of its UV detection system housed within that module. See Pet. Reply 17–22. Instead, even though Howell-596 discloses a sensor behind the ear of a user, it maintains the UV detection system in a module toward the front of the temple, away from the ear. See id. at 18–19; PO Surreply 21–22; Ex. 1003 ¶ 205 (describing UV detection system 2102), Fig. 21 (showing UV detection system 2102 toward the front of the temple). Moreover, Petitioner’s reliance on the sensor placed behind the ear of the user in Howell-596 lacks weight because that sensor merely indicates that the device “is being worn by a user,” which serves a very different purpose than Howell-596’s UV detection system, which seeks to monitor a user’s exposure to UV radiation, a central purpose of Howell-596’s eyewear. See Ex. 1003 ¶ 205, code (57). Howell-833 also employs a UV sensor behind the ear, but Petitioner does not establish that it operates any differently than the “being worn” sensor in Howell-596, and therefore does not establish that Howell-596’s UV detection system would still work for its intended purposes in Petitioner’s proposed combination. See Pet. Reply 19–20.” slip op. at 29
Patent outcomesUS 8,708,483 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,708,483 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - DISH Network L.L.C. / DISH Technologies L.L.C. v. Digital Broadcasting Solutions, LLCSome claims unpatentablePTAB · Dec 9, 2024 · IPR2023-00976 · APJ Sheila F Mcshane · IPR · Final written decision
Claims 1–16, 18, and 19 are unpatentable over Casagrande and Russ and Dow; claim 17 was not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Relying on the testimony of Dr. Jeffay, Petitioner proposes that a” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“1. “a first period of time” Patent Owner contends that the term “first period of time,” recited in limitation 1[d][i], would be understood “to start after transmission of the entire ‘video program’ to the DVR.” PO Resp. 5 (citing Ex. 2006 ¶ 47). Patent Owner refers to claim 1 and its recital that the video program is provided “in its entirety.” Id. (citing limitation 1[d][ii]). Patent Owner argues that “[i]n order to ‘provide said video program in its entirety’ from ‘said memory device,’ the entire ‘video program’ must be stored in the ‘memory device,’ which is only possible after transmission of the entire ‘video program’ to the DVR.” Id. (citing Ex. 2006 ¶ 47). Patent Owner contends that in light of dependent claims 6 and 14, the “first period of time” must start after the transmission of the entire video program. Id. at 5–6 (quoting claim 6 (“wherein said first period of time is a period of time that is less than one week from said transmission of said video program”); claim 14 been transmitted.”)). Additionally, Patent Owner refers to the prosecution history of the ’710 patent: a digital video recorder (“DVR”) that stores a video program and plays at least a portion of the video program back at a later time (e.g., a time more convenient to the user of the DVR, etc.) . . . In a first state, the DVR is configured to play the program as it was originally recorded (e.g., with both the program and auxiliary data). In a second state, the DVR is configured to play the program data without the auxiliary data (or a portion thereof) . . . To this end, the claimed invention provides that if the video program is being watched within a first period of time (e.g., within a day or two of the video program being transmitted to the DVR, etc.), then the video program will be played back in its entirety (e.g., including both program and auxiliary data). PO Resp. 6 (quoting Ex. 1003, 108–109). Based on this passage, Patent Owner asserts that the “first period of time” must start after transmission of the entire video program. Id. (citing Ex. 2006 ¶ 49). Patent Owner argues that the referenced statement in the prosecution history is “clear and unambiguous.” PO Sur-reply 3. Petitioner contends that Patent Owner’s interpretation of the term” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“specific reasoning to combine Casagrande and Russ to be persuasive. See PO Resp. 23–24. Dr. Jeffay testifies that “Casagrande acknowledges that one concern expressed by content providers is the decreasing value of interstitial content over time, particularly because commercials may become less relevant to the user or may expire.” Ex. 1002 ¶ 117 (citing Ex. 1006, 10:5–13 (“[T]he supplemental content 602 may also be selected to replace a commercial with a timelier commercial from the same advertiser. For example, a department store may have originally advertised a sale during the original broadcast of the show, but that particular sale may have since ended.”)). Accordingly, the evidence supports that Casagrande identifies that the earlier playback of commercials has value, which provides support” slip op. at 31
- Obviousness (§103) › Objective indicia / secondary considerationsDecided for petitioner
“ix. Conclusion Patent Owner presents no evidence of objective indicia of” slip op. at 39
Patent outcomesUS 8,929,710 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,929,710 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentablePTAB · Apr 19, 2023 · IPR2021-01576 · APJ Scott Raevsky · IPR · Final written decision
Claims 1–12 are unpatentable as obvious; claims 13–18 are not shown unpatentable because the asserted combinations fail to teach or suggest multiple LED packages connected in series.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“PO Resp. 8 (citing Ex. 2001 ¶¶ 41–42). Patent Owner argues that its definition is superior because Petitioner’s “and/or” qualifier “might be read as considering a person who has ‘related circuit design’ experience but no experience with ‘LED devices’ to be a POSITA.” Id. at 9. Patent Owner further views Petitioner’s “or a related field” phrasing as potentially including a person who has no experience with LED devices. Id. We agree with Patent Owner on both points. We agree with Patent Owner that Patent Owner’s proposal is more consistent with the problems and solutions in the ’979 patent and prior art of record. We adopt Patent Owner’s definition of the level of skill but note that had we adopted Petitioner’s level of skill, we would not have reached a different outcome here.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“specification support its construction of “formed or mounted to” as encompassing indirect attachment to the substrate. Neither the plain claim language nor the specification requires the phosphor coating to be directly attached to the substrate. Limitation 1(c) recites, wherein the LED chips comprise a phosphor coating to produce a change in a color or a quality of light emitted from the LED chips, wherein the LED chips, the power connection leads, and the phosphor coating are formed or mounted to a flexible substrate that is sufficiently flexible to be formed into a cylindrical shape[.] Ex. 1001, 22:7–12 (emphasis added). The claim is inartfully written, as it requires the LEDs to comprise a phosphor coating but then separately recites that the LED chips and the phosphor coating are formed or mounted to the substrate. But Petitioner correctly explains that the plain meaning requires that “the LED chips comprise a phosphor coating” and that “the [same] phosphor coating” (included in the LED chips) is “formed or mounted to a flexible substrate.” Reply 2. In other words, the use of the term “the” before “phosphor coating” indicates reliance on the antecedent basis of “LED chips comprise a phosphor coating,” and thus the same coating of the LED chips is formed or mounted to the substrate. Logically, by including a phosphor coating with the LED chips, which are formed or mounted to the substrate, the coating of these chips is also indirectly formed or mounted to the substrate. Conversely, it would be illogical to conclude that the claim recites two phosphor coatings, one attached to the LED chips and another attached directly to the substrate, because the structure of the claim refers to a single phosphor coating of the LED chips. Even Patent Owner concedes that the claim encompasses the phosphor coating indirectly being mounted or attached to the substrate (in addition to being directly attached). PO Resp. 11 (“The ordinary English reading of the claim language does not encompass the phosphor coating only being indirectly attached to the substrate, instead, the language indicates that the coating is directly applied to the substrate.” (emphasis changed)), 13 (“the phosphor coating . . . is not merely attached to the substrate indirectly”).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“After considering Patent Owner’s arguments, which we address below, we agree with Petitioner that the combination of Wojnarowski and Martin discloses this limitation and that a person of ordinary skill in the art would have been motivated to combine the references’ teachings in the manner asserted by Petitioner. Briefly, we summarize our findings, and then we address the parties’ arguments in more detail. First, we agree with Petitioner, and Patent Owner does not dispute, that Wojnarowski’s AC input voltage would have been converted to DC voltage in light of the bridge rectifier and capacitor disclosed by Wojnarowski. Pet. 25; Ex. 1002 ¶¶ 119– 20 (citing, e.g., Ex. 1005, 7:59–62, Fig. 24); PO Resp. 35–36 (acknowledging Wojnarowski discloses converting an AC input to a DC voltage). Second, we further agree with Petitioner, and Patent Owner does not dispute, that excessive current due to too few LEDs would have harmed Wojnarowski’s LEDs, and too small a current due to too many LEDs would be insufficient to power Wojnarowski’s LEDs. Pet. 26; Ex. 1002 ¶ 134; PO Resp. 48 (discussing, but not disputing, these assertions).13 Third, we agree that a POSITA would have recognized in view of Martin’s teachings and the knowledge of a skilled artisan that when configuring Wojnarowski’s device, the total forward voltage drop of the series-connected LEDs should approximately match the DC voltage output 13 Petitioner explains the relationship between voltage and current for the LEDs as follows: “the total voltage drop of the circuit would dictate the current drawn by the LED circuitry, which would have been known to be inversely proportional to the voltage.” Pet. 26 (citing Ex. 1002 ¶ 134). of Wojnarowski’s circuit. Pet. 26–27 (citing Ex. 1002 ¶¶ 132–38; Ex. 1008, Abstract (LED voltage “must be matched to the input source voltage”), ¶ 60 (“For AC or any other regularly varying input voltage, there is an additional requirement to direct drive voltage matching”)). For example, Martin teaches that “[t]he number of LEDs in the monolithic array may be selected to achieve a particular voltage drop across each device.” Ex. 1006 ¶ 22. Martin further explains, “[t]he voltage across each of the individual LEDs in the array is the line voltage divided by the number of LEDs in series,” and “[t]he number of LEDs is chosen such that the maximum voltage across each individual LED during the peak in the alternating current cycle is low enough so as not to damage the LEDs.” Id. The forward voltage drop across Martin’s 38 LEDs is about 171 V, which matches Martin’s AC input voltage peak of about 169.71 V. See id. (“At 120 RMS volts, the peak voltage will be about 180V [correction: 169.71 V],” and if the LEDs “can tolerate a maximum forward voltage of 4.5V, at least 38 LEDs connected in series are required.” (38 LEDs x 4.5 V = 171 V)); PO Resp. 41–42 (“While Martin references ‘about 180V,’ both parties agree that the correct value of the peak voltage Vp is 169.71 V.” (citing Ex. 1002 ¶ 127)). Although Martin’s LED forward voltage drop (171 V) differs slightly from the peak input voltage (169.71 V), Patent Owner conceded at the hearing that the claimed “matches” does not require an exact equivalence. Tr. 38:9–11 (“Patent Owner agrees . . . that matching has a meaning that goes beyond exact equivalence.”).14” slip op. at 22
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“35 U.S.C. § 311(b). PO Resp. 22–25. This statute provides that “[a] petitioner in an inter partes review may request to cancel as unpatentable 1 or more claims of a patent only on a ground that could be raised under section 102 or 103 and only on the basis of prior art consisting of patents or printed publications.” § 311(b) (emphasis added). Patent Owner contends that Martin is not available as prior art under 35 U.S.C. § 311(b) because it is not a patent or printed publication and is only prior art under 35 U.S.C. § 102(e). PO Resp. 22. Patent Owner argues that documents are “printed publications” as of the date they become available to the public, and Martin became public on its publication date of October 21, 2004, after the February 25, 2004 priority date of the ’979 patent. Id. at 23. Patent Owner raises a similar argument for the Soules-II reference in Ground 6. Id. at 25– 26. Petitioner responds that the AIA framework permits the use of § 102(e) prior art in IPR proceedings, unlike formerly available covered business method review (CBM) proceedings, which restricted challenges to § 102(a) prior art. Reply 29. We agree. The statute governing the formerlyavailable CBM proceeding explicitly limits challenges based on “prior art that is described by section 102(a).” AIA § 18(a)(1)(C). In contrast, § 311(b) more broadly permits challenges “on the basis of prior art consisting of patents or printed publications.” The broader language in § 311(b) implies that unlike CBMs, IPRs are not limited to challenges solely under § 102(a) prior art. The parties cite to no Federal Circuit decisions that squarely address this issue. However, the Federal Circuit has applied § 102(e) patent application publication prior art in appeals from IPR proceedings. See, e.g., Purdue Pharma L.P. v. Iancu, 767 Fed. App’x 918, 920–21, 926 (Fed. Cir. 2019) (nonprecedential) (determining that a § 102(e) patent application publication was available as prior art in an IPR). The Board has also long permitted challenges based on patent application publications under § 102(e). See, e.g., Idle Free Sys., Inc. v. Bergstrom, Inc., IPR2012-00027, Paper 14 at 27 (PTAB Jan. 31, 2013) (instituting trial over § 102(e) ground based on a patent application publication). We therefore find Patent Owner’s § 311(b) argument unpersuasive.” slip op. at 34
Patent outcomesUS 10,652,979 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,652,979 - Fujifilm Corporation v. Sony CorporationSome claims unpatentablePTAB · Nov 7, 2018 · IPR2017-01268 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 15 and 17 are unpatentable as anticipated by Ishikawa; the petitioner did not show claims 1–11, 16, and 18–20 unpatentable over Aonuma or Aonuma and Abe.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) at the time of the ’774 patent would have had “a bachelor’s degree in materials science, electrical engineering, mechanical engineering, chemistry, or a closely related field, and at least five years of experience” in industry or academic research relating to magnetic tape, or “a master’s degree or higher” in the same fields and at least three years of experience relating to magnetic tape. Pet. 13 (citing Ex. 1003 ¶ 65; Ex. 1018 ¶ 60). Patent Owner does not dispute Petitioner’s assessment in its Response, and Dr. Talke agrees that it “is reasonable.” Ex. 2026 ¶¶ 25–26. Petitioner’s assessment appears consistent with the level of ordinary skill in the art at the time of the invention as reflected in the prior art in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Accordingly, we adopt Petitioner’s assessment of the level of ordinary skill in the art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“the broadest reasonable construction, claim terms are presumed to have their ordinary and customary meaning as understood by a person of ordinary skill in the art in the context of the entire patent disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For the purposes of the Decision on Institution, we determined that, based on the record at that time, no claim term required express construction (Dec. on Inst. 7), and we see no reason to modify that determination in light of the record developed during trial. C.” slip op. at 9
- Expert testimonyPetitioner expert creditedMixed
“considerably greater than Ishikawa’s stylus load of 50–300 μN (Ex. 1015 ¶ 45). The Talke Declaration does not address this discrepancy, and Dr. Talke stated during his deposition that reducing the stylus load would reduce scratching of the magnetic tape surface. Ex. 1030, 108:14–19 (“Q: Would reducing the contact pressure for the stylus instrument reduce the scratching of the magnetic tape surface by the stylus? A: Yes, it would, but you have to remember the other problem is the diameter and size of the stylus.”). Moreover, Petitioner provides evidence that it was not uncommon to use stylus-type profilometers to measure the properties of magnetic tape, even after Bhushan was published in 1996. See Reply 6. In particular, Petitioner points to Saliba,6 which describes using a stylus-type profilometer, under identical conditions to those used in Ishikawa, to measure the surface characteristics (including peak-to-valley roughness) of the backcoating of magnetic tape. Ex. 1027, 7:28–40, 57–60. Petitioner further points to Ohno,7 which also describes using “a stylus type 3D profilometer in accordance with JIS B0601” to measure the surface roughness characteristics of magnetic tape. Ex. 1028 ¶ 36; see also Ex. 1015 ¶ 45 (Ishikawa explaining that surface roughness characteristics were measured “in accordance with JIS-B0601-1994”); Ex. 1027, 7:28–39 (Saliba explaining that surface roughness characteristics where measured “in accordance with JIS-B0601-1994”). Accordingly, we are persuaded that the 6 US Patent No. 6,558,774 B1, issued May 6, 2003 (Ex. 1027). 7 U.S. Patent App. Pub. No. US 2005/0175866 A1, published Aug. 11, 2005 (Ex. 1028). evidence establishes that a stylus-type profilometer is a suitable device for measuring the surface characteristics of magnetic tape.” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We agree with Petitioner that Ishikawa teaches “peak-to-valley roughness less than about 325 nm” as recited in claim 15. Pet. 24–25; Reply 5–8; Ex. 1003 ¶ 216. In particular, Ishikawa teaches a backcoating layer of a magnetic tape that has a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm.” Ex. 1015 ¶ 44. Ishikawa provides five example embodiments of its magnetic tape, and reports the measurements of a number of characteristics of the backcoat layer for each example, including peak-to-valley roughness Rz. Id. ¶¶ 120–134, Table 1. Ishikawa discloses that peak-to-valley roughness Rz was measured using a stylus-type profilometer under the following conditions: Stylus: diameter: 1.5 to 2.5 μm; curvature: 60º Contact pressure: 50 to 300 μN Cut-off length: 80 μm Sampling length: 80 μm Assessment length: 400 μm Id. ¶¶ 45, 49. The reported peak-to-valley roughness Rz values for the five examples ranged from 58 to 87 nm, as shown in the annotated portion of Ishikawa Table 1 from the Petition, reproduced below: Pet. 24 (citing Ex. 1015, Table 1). The annotated portion of Ishikawa Table 1 shows the results for the measured characteristics of the backcoat layer of Examples 1–5, with the peak-to-valley roughness Rz values highlighted by a red box. Id. Because Ishikawa teaches that the backcoating layer of its magnetic tape should have a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm,” and because Ishikawa presents examples of magnetic tape with backside surfaces having a peak-to-valley roughness of 87 nm or less, Ishikawa discloses “a peak-to-valley roughness less than about 325 nm” as recited in claim 15.” slip op. at 16
Patent outcomesUS 7,029,774 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,029,774 - Alere Inc. v. Rembrandt Diagnostics, LPSome claims unpatentablePTAB · Feb 9, 2018 · IPR2016-01502 · APJ Jon B Tornquist · IPR · Final written decision
Claim 2 is unpatentable as anticipated by MacKay; claims 3–5 were not shown unpatentable over MacKay and Cipkowski.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble not limitingDecided for petitioner
“structure or steps, or if it is ‘necessary to give life, meaning, and vitality’ to the claim.” Catalina Mkt’g Int’l, Inc. v. Coolsavings.com, Inc., 289 F.3d 801, 808 (Fed. Cir. 2002) (quoting Pitney Bowes, Inc. v. Hewlett–Packard Co., 182 F.3d 1298, 1305 (Fed. Cir. 1999)). For example, a preamble may be limiting when the disputed preamble phrase provides antecedent basis for a claim term in the body of a claim, the specification underscores that the additional structure recited in the preamble is important, or when the patentee clearly relied upon the preamble during prosecution to distinguish the claimed invention from the prior art. Id. at 808–09. “Conversely, a preamble is not limiting ‘where a patentee defines a structurally complete invention in the claim body and uses the preamble only to state a purpose or intended use for the invention,’” id. at 808, or where the patentee uses the preamble to give “a descriptive name to the set of limitations in the body of the claim,” IMS Tech., Inc. v. Haas Automation, Inc., 206 F.3d 1422, 1434 (Fed. Cir. 2000) (“The phrase ‘control apparatus’ in the preamble merely gives a descriptive name to the set of limitations in the body of the claim that completely set forth the invention.”). The term “device” is not recited in the body of any claim of the ’019 patent,4 the body of claim 1 recites a structurally complete invention, and the preamble phrase “device for collecting and assaying a sample of biological fluid” specifies the intended use of the invention. Thus, we find the claims of the ’019 patent do not support construing “device” as a limitation. See Catalina Mkt’g, 289 F.3d at 808–09.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“device” set forth above requires a single, unitary structure rather than a collection of separate structures that could be used during the test. See id. at 18 (concluding without analysis that the dictionary definition requires a “single, unitary structure”). Indeed, despite the ubiquitous use of the term “device” in patents generally, we are directed to no case in which the term “device,” by itself, was found to require a single, unitary structure. See Manual of Patent Examining Procedure, Section 2106, I (identifying “devices” as one of the four categories of statutory subject matter); Saffran v. Johnson & Johnson, 712 F.3d 549, 565 (Fed. Cir. 2013) (O’Malley concurring in part) (confirming that, in general, the term “device” is generic). Thus, we are not persuaded that the ordinary meaning of the term “device” requires a “single, unitary structure.” See Ex. 1023 ¶ 66 (Dr. Bohannon testifying that the word device, like the words “apparatus” or “system,” is merely a generic term that does not have a specialized meaning in the art and does not require a single, unitary structure). slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We do not find this argument persuasive. As noted above, we do not construe claim 1 to contain a method step of adding fluid to the container. We construe the first wherein clause of claim 1(c), instead, to require a structure that is capable of allowing liquid to enter the container when the flow control channel is properly disposed therein and is capable of directing this liquid to the sample loading zone of the assay test strip without the liquid having to migrate through an intermediate structure, such as a wicking material. We are persuaded—and Patent Owner does not dispute—that the apparatus of MacKay, as disclosed in Figures 8A–C, has a structure that is capable of achieving both functions. See, e.g., Tr. 26:10–30:20. First, given the open nature of the container, it is evident that liquid may be added to the container when the flow control channel is disposed within the container, and Patent Owner does not assert otherwise. See, e.g., id. Second, even if the fluid present in Figures 8A–C is considered, there is no intermediate structure in the container of MacKay that would prevent additional assay sample fluid from entering the container and being immediately directed to the sample loading zone of the assay test strips.6 Based on the foregoing, we find that MacKay discloses every limitation of claims 1 and 2 of the ’019 patent. Accordingly, Petitioner has demonstrated by a preponderance of the evidence that claim 2 is anticipated by MacKay.” slip op. at 21
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“discloses the subject matter of claims 3–5 of the ’019 patent. Pet. 26–30. Petitioner also asserts that one of ordinary skill in the art would have sought to insert the test trip and flow control channel of MacKay in the holder of Cipkowski, in order to prevent “flooding of the test strip as taught in MacKay.” Id. at 29.” slip op. at 23
Patent outcomesUS 6,548,019 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 6,548,019 - Old Republic General Insurance Group, Inc. / Old Republic Insurance Company et al. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Apr 12, 2017 · IPR2015-01992 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1, 2, 4–12, 14–24, and 34–48 are unpatentable over the stated grounds; claims 3 and 13 were not shown unpatentable, and claims 25–33 and 49 were disclaimed.
RulingsFinal written decision- Adverse judgmentAdverse judgmentOther
“On February 8, 2017, Patent Owner informed the Board that it had “disclaimed claims 25–33 and 49” of the ’002 patent, thereby “rendering the institution of claims 25–33 and 49 in the subject inter partes review proceeding moot.” Paper 18, 1; Ex. 2005 (disclaimer of claims 25–33 and 49 pursuant to 37 C.F.R. § 1.321(a)).” slip op. at 2
- BurdenMixed
“2. Analysis To anticipate a claim a “prior art reference must disclose each and every feature of the claimed invention, either explicitly or inherently.” Eli Lilly & Co. v. Zenith Goldline Pharm., 471 F.3d 1369, 1375–76 (Fed. Cir. 2006). An inherent disclosure may be found when an asserted prior art reference “necessarily” includes the unstated limitation. Transclean Corp. v. Bridgewood Servs., Inc., 290 F.3d 1364, 1373 (Fed. Cir. 2002).” slip op. at 13
- ExcludeMotion to exclude, deniedDenied
“Upon review of Petitioner’s arguments and supporting evidence, we are persuaded that Petitioner has identified where each limitation of independent claim 1 is disclosed in Huang. Claims 11, 34, and 40 contain limitations similar to claim 1, Petitioner provides detailed arguments as to where each limitation of these claims is disclosed in Huang, and Patent Owner does not present any arguments for these claims separate from those 7 At oral argument, Patent Owner asserted that we should not consider Petitioner’s argument that the icons of Huang contain URL information because this argument was presented for the first time in Petitioner’s Reply. Tr. 32:19–35:5. Patent Owner did not file a motion to exclude this evidence, however, or request a sur-reply to address any allegedly new issues raised for the first time in Petitioner’s Reply. Id. at 34:18–23. Nor is it evident why Petitioner’s arguments are not appropriate rebuttal arguments addressing Patent Owner’s proposed construction of “pointer.” Accordingly, we decline to exclude Petitioner’s URL arguments and evidence.” slip op. at 15
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“be used in conjunction with the mobile interface agent, including “a computer, cable set top box, cellular phone, or other device.” Ex. 1001, 4:44–45. Patent Owner does not explain why the description of a “pointer” in one “context,” i.e., on a computer or PDA, represents a clear and deliberate attempt to define the term in all contexts, such that all pointers must be a “reference” to “a type of menu item” and be “accessible on a computer, PDA, or server.” See In re Paulsen, 30 F.3d at 1480 (noting that an inventor is “free to define the specific terms used to describe his or her invention,” but “this must be done with reasonable clarity, deliberateness, and precision”). The broadest definition of the term “pointer” in the ’002 patent is “a link/shortcut to an item.” Ex. 1001, 10:8–10 (“As discussed above, a pointer is a link/shortcut to an item such as . . . .”); Dec. on Inst. 10. This definition is consistent with the description of “pointers” in the ’002 patent written description and claims. Ex. 1001, 20:4–6 (“wherein the pointers provide links to access the corresponding user specific resources and information.”). Accordingly, we construe “pointer” to mean “a link or shortcut to an item.”” slip op. at 9
Patent outcomesUS 6,546,002 mixedClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 6,546,002 - Google Inc. v. Network-1 Technologies, Inc.Some claims unpatentablePTAB · Jun 20, 2016 · IPR2015-00345 · APJ Kevin F Turner · IPR · Final written decision
Claims 9–16, 23, and 24 were held unpatentable as anticipated by Iwamura; the Board did not find claims 1–8, 21, 22, 25–27, 29, 30, 33–35, 37, and 38 unpatentable.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Although the sections of the Specification of the ’237 Patent cited by Petitioner relate to disk size, that size is a direct result of the number of records in the data set. Claim 1, for example, recites “using the received features extracted from the media work to perform a sub-linear time search of extracted features of identified media works.” For that claim, under our adopted claim construction, the size of the data set would be the number of extracted features of the identified media works. It would not be logical to assume that the size of the data set would be the length of an individual record or the amount of disk space the data set occupies when the number of extracted features would be readily available. Although disk space could be used as a measure, it would be variable with respect to the format of the disk space, for example. Therefore, we are not persuaded that disk space should be used as a determinant of data set size in the construction of “sub-linear search.” As such, the data set would be the number of extracted features, in claim 1, irrespective of the exact number of commercials or frames.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“ii) “non-exhaustive search” With respect to the claim term “non-exhaustive search,” Patent Owner emphasizes that a non-exhaustive search makes a comparison without all possible matches but does not concern itself with whether all data within all possible matches have been compared. PO Resp. 6–7. Petitioner does not dispute the construction, and we remain persuaded that a “non-exhaustive” search need not consider all data within all possible matches, but rather should be exhaustive or non-exhaustive with respect to the number of records in a database. See Dec. 5–7.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for petitioner
“Petitioner responds that the statements in the Specification do not rise to the level of lexicography or disavowal. Reply 4–5 (citing Facebook, Inc. v. Pragmatus AV, LLC, 582 F. App'x 864, 868 (Fed. Cir. 2014); Renishaw PLC v. Marposs Societa' per Azioni, 158 F.3d 1243, 1249 (Fed. Cir. 1998)). We agree, given that the cited portion provides that an approximate nearest neighbor search may be an example of a sublinear search, but not that all approximate nearest neighbor searches must be sub-linear. Additionally, Patent Owner has not provided persuasive evidence that all approximate nearest neighbor searches must be sub-linear, other than the citation to the Specification. As well, similar to our discussion of neighbor searches above, we are not persuaded that if an approximate nearest neighbor search happens to arrive at an exact match, that would negate the nature of the search. We are persuaded that an approximate nearest neighbor search would depend on the search methodology and not on the specific results obtained. Additionally, as Petitioner points out, the instant claims confirm that sublinearity is not necessarily required for an approximate nearest neighbor search. Reply 5–6. Claim 33 recites, in part, a “sublinear approximate nearest neighbor search,” whereas claims 9 and 12 simply recite an “approximate nearest neighbor search,” without the sublinear modifier. Interpreting all recitations of approximate nearest neighbor searches as intrinsically sublinear would render the limitation in claim 33 superfluous. Id. (citing Phillips v. AWH Corp., 415 F.3d 1303, 1314 (Fed. Cir. 2005); Digital-Vending Servs. Int’l, LLC v. Univ. of Phoenix, Inc., 672 F.3d 1270, 1274–75 (Fed. Cir. 2012)). For this additional reason, we remain persuaded that an approximate nearest neighbor search corresponds to “identifying a close match that is not necessarily the closest match,” without a requirement of being sublinear.” slip op. at 9
- Expert testimonyPetitioner expert discountedDecided for patent owner
“in which he agrees that Iwamura’s system compares a work to be identified with each reference work in the database. PO Resp. 26–28 (citing Ex. 2006, 207:18–23, 223:2–8, 247:18–20, 269:19–270:2, 271:19–21); see also Tr. 17:17 (Petitioner conceding at oral hearing that “every song is looked at”). Dr. Moulin also acknowledges that if a non-exhaustive search is one that does not look at each of the melodies in the database, Iwamura discloses an exhaustive search rather than a non-exhaustive search. Ex. 2006, 233:24– 234:14; see PO Resp. 27. Despite Dr. Moulin’s testimony and Iwamura’s description of a search that compares an input melody to each melody in the database, Petitioner contends that Iwamura discloses a non-exhaustive search. First, Petitioner submits that Iwamura specifically identifies its peak note search as a non-exhaustive search because the “search speed using peak notes is 20% of a brute force search.” Pet. 9–10 (quoting Ex. 1012, 9:8–11); Reply 7–8 (citing Ex. 1012, 9:7–11; Ex. 2005 ¶ 82; Ex. 2001). We agree with Patent Owner, however, that Iwamura’s peak note search accelerates a search within a single comparison between a work to be identified and an individual record in the database, while still comparing the work to each record in the database. See PO Resp. 29–30. In other words, the peak search technique may improve the efficiency of an individual comparison between an entered melody and a reference melody in the database, but it is still an exhaustive search because it compares the entered melody with each musical work in the database, as confirmed by Petitioner’s declarant, Dr. Moulin. Id. (citing Ex. 2006, 269:19–270:2). Petitioner further argues that Iwamura discloses a non-exhaustive search because the search can be accelerated by stopping the search when computations “exceed[] a certain limit.” Pet. 10 (quoting Ex. 1012, 7:56– 57). We agree with Patent Owner that this disclosure also refers to improving the speed of a comparison between the work to be identified and a single record in the reference database. See PO Resp. 32 (citing Ex. 2005 ¶ 179). As Dr. Karypis explains and Dr. Moulin confirms, when the total absolute difference computed between the entered melody and a particular reference melody exceeds a certain limit, the computation stops, and the search shifts to the next peak range comparison within the same record. Id. at 32–35 (citing Ex. 2005 ¶¶ 180–81; Ex. 2006, 241:24–242:2). Thus, Iwamura’s computation “limit” does not describe a non-exhaustive search because Iwamura still compares a work to be identified with each reference melody in the database.” slip op. at 16
Patent outcomesUS 8,205,237 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,205,237
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.