- Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.
RulingsFinal written decision- Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner
“have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39
Patent outcomesUS 11,230,430 unpatentable§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentablePTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45
Patent outcomesUS 10,994,923 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,994,923 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - Google LLC v. Ipa Technologies Inc.All claims unpatentablePTAB · Jun 1, 2023 · IPR2019-00731 · APJ Trevor M Jefferson · IPR · Remand
Claim 28 is unpatentable under § 103(a) over Martin and Farley; Martin qualifies as prior art because Dr. Moran’s contribution made him a joint inventor of the relied-on disclosure.
RulingsRemand decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“we do not agree with Patent Owner that evidence analogous to that in Duncan Parking is required in this case or for Petitioner to meet its burden by stating which specific aspects of the Facilitator were conceived by Dr. Moran. PO Remand 3–4. As the Federal Circuit stated, the facilitator described in Section 4.5 of the Martin reference plays a central role in the OAA disclosed in the specification of the ’560 patent. Google, 34 F.4th at 1087; see Ex. 1011, 23–24 (Section 4.5); Ex. 1001, 19:14–19:62. In addition, Patent Owner admits that “large portions of the ’560 application and the Martin reference are identical or almost identical.” PO Resp. 1. We find that Petitioner and Dr. Moran have sufficiently identified the facilitator in the Martin reference as his work, and persuasively asserted that Dr. Moran’s background and experience with OAA and distributed software systems support his contribution to the conception of the facilitator in the distributed agent approach of Sections 4.1–4.5. Ex. 1007 ¶¶ 23–39. Dr. Moran’s testimony provides sufficient and persuasive detail to support his contribution claim to the facilitator of Section 4.5. Id.” slip op. at 21
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“With respect to Dr. Moran’s contribution to the Martin reference, we find Dr. Moran’s testimony credible over that of Mr. Cheyer and Mr. Martin, because, as the Federal Circuit noted, because the latter testimony conflicts with other evidence of record. Google, 34 F.4th at 1088. Cheyer’s and Martin’s testimony that Dr. Moran’s role was administrative and non-technical with respect to the core infrastructure of OAA is belied by a separate article describing OAA that includes the facilitator and lists Dr. Moran as the lead author. Ex. 1174, 1–2, 4. Indeed, the OAA article lists Dr. Moran and Mr. Cheyer as authors but excludes Mr. Martin. Id. Although Mr. Cheyer disagrees with the article’s description of the origins of OAA and the facilitator (Ex. 2037, 78:23–79:12 (Mr. Cheyer asserting that he “would not agree in the characterization of Open Agent Architecture grew out of [earlier] works” as described in the article)), Mr. Cheyer admits patent]” (id. at 1088), “which is a continuation-in-part of the application that resulted in the ’115 patent” (id. at 1086). in his deposition that Dr. Moran was extremely technical, and probably made technical contributions to OAA (id. at 34:1–20, 64:16–20, 102:2–4). Similarly, Mr. Martin’s testimony also supports that Dr. Moran “may have made contributions to the technological development of either interfaces for use with OAA, agents used with OAA, or systems based on OAA.” Ex. 2038, 116:2–8, 117:7–119:10. When viewed in light of Dr. Moran’s status as a joint inventor on the closely related ’931 patent (Ex. 2002, code (75)) and as a lead author of the substantive paper that discusses OAA’s early development, we find Mr. Martin’s and Mr. Cheyer’s admissions—that Dr. Moran made technical contributions to OAA—undermine their testimony that Dr. Moran’s inclusion as an author on the Martin reference was a matter of administrative respect and not a result of a technical contribution. See PO Remand 11; PO Resp. 50–51. Indeed, we find Cheyer and Martin’s general description of Dr. Moran—as an administrator without technical contributions to the Martin reference—is not supported by the full record, which instead supports Dr. Moran’s contributions to technical work that involves the Martin reference, such as contemporary papers and the ’931 patent. See, e.g., Ex. 1174, 2002. In sum, the testimony and contemporary evidence supports Dr. Moran’s testimony that his conception and contribution to the Martin reference, the facilitator, was technical and not merely administrative. Ex. 1007 ¶ 39.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“We disagree with Patent Owner’s contention. Rather, we find that the Petition persuasively explains how Martin discloses a facilitator agent arranged to coordinate cooperative task completion within a distributed computing environment having autonomous service-providing electronic agents. Pet. 39; Ex. 1002 ¶ 100. Further, Petitioner persuasively demonstrates that Farley discloses how agent functionality can be distributed across multiple processes. Pet. 39–40; Ex. 1002 ¶¶ 101–102. Finally, Petitioner also provides persuasive reasons as to why one of ordinary skill in the art would have been motivated to combine Martin and Farley, including reasons expressly provided by Farley. Pet. 40; Ex. 1002 ¶¶ 103–104.” slip op. at 28
- ExcludeMotion to exclude, deniedMixed
“III. MOTION TO EXCLUDE In our prior Final Written Decision, we denied Patent Owner’s Motion to Exclude (1) portions of Exhibit 1153; (2) Exhibits 1170, 1171, and 1172; (3) Exhibit 1174; and (4) portions of Exhibits 2037 and 2038; and we dismissed as moot Patent Owner’s Motion to Exclude (1) Exhibits 1158 and 1159 and (2) Exhibits 1175, 1176, and 1181. Final Dec. 26–30. We maintain these determinations on remand.” slip op. at 29
Patent outcomesUS 7,069,560 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,069,560 - Google LLC v. Ipa Technologies Inc.All claims unpatentablePTAB · Jun 1, 2023 · IPR2019-00728 · APJ Trevor M Jefferson · IPR · Remand
On remand, the Board held claim 63 unpatentable under § 103(a) over Martin and Kohn, finding Martin was prior art because Moran was a joint inventor.
RulingsRemand decision- RemandDecided for petitioner
“Petitioner relies upon is sufficient to establish the degree to which the reliedon portions of the Martin reference were conceived by Dr. Moran, and the significance of those contributions to the overall anticipating disclosure of the Martin reference. See Google, 34 F.4th at 1086–88; Duncan Parking, 914 F.3d at 1358. Contrary to Patent Owner’s contentions, Petitioner is not merely relying on Dr. Moran’s authorship to establish inventorship. PO Remand 8 (citing In re Katz, 687 F.2d 450, 455 (C.C.P.A. 1982)). Instead, Dr. Moran’s testimony establishes how his background led to his contributions to the multiple facilitator architectures disclosed in Martin and in the ’115 patent specification. Google, 34 F.4th at 1087; Ex. 1007 ¶¶ 23– 34 (OAA project), 35–39 (OAA paper). In view of Dr. Moran’s testimony, we do not agree with Patent Owner that evidence analogous to that in Duncan Parking is required in this case or for Petitioner to meet its burden by stating which specific aspects of the Facilitator were conceived by Dr. Moran. PO Remand 3–4. As the Federal Circuit stated, the facilitator described in Section 4.5 of the Martin reference plays a central role in the OAA disclosed in the specification of the ’115 patent. Google, 34 F.4th at 1087; see Ex. 1011, 23–24 (Section 4.5); Ex. 1001, 18:56–19:36. In addition, Patent Owner admits that “large portions of the ’115 application and the Martin reference are identical or almost identical.” PO Resp. 1. We find that Petitioner and Dr. Moran have sufficiently identified the facilitator in the Martin reference as his work, and persuasively asserted that Dr. Moran’s background and experience with OAA and distributed software systems support his contribution to the conception of the facilitator in the distributed agent approach of Sections 4.1–4.5. Ex. 1007 ¶¶ 23–39. Dr. Moran’s testimony provides sufficient and persuasive detail to support his contribution claim to the facilitator of Section 4.5. Id. Based on the record, the Federal Circuit’s remand squarely asks whether Dr. Moran’s stated contributions to the conception of the facilitator should be credited over Cheyer and Martin’s conflicting testimony regarding his lack of technical contribution. Google, 34 F.4th at 1088 (stating that “[t]he testimony of Dr. Moran, if credited, might well establish that he was a co-inventor of the particular portions of the Martin reference relied on by Google in, and relevant to, the challenge to particular claims”). When Dr. Moran’s testimony is viewed in combination with the supporting evidence,7 we find that incorporation of the facilitator in general, which is also found in the specification and claims, persuasively supports Dr. Moran’s testimony regarding his inventive contribution to the Martin reference. Specifically, we find Dr. Moran’s testimony persuasively supported and credible over the conflicting testimony and evidence offered by Mr. Cheyer and Mr. Martin. See Pet. Reply 12–13; Ex. 2038, 116:2–8, 117:7–119:10 (Cheyer admission that Dr. Moran made technical contributions to OAA); Ex. 2037, 34:1–20, 64:16–20, 102:2–4.” slip op. at 21
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner
“Upon weighing the parties’ testimony and evidence, we agree with Petitioner that sufficient evidence supports the technical contributions of Dr. Moran to OAA, including admissions by Mr. Martin that Dr. Moran made such contributions (see Ex. 2038, 116:2–116:8, 117:7–119:10; see also id. at 73:3–73:15); contemporaneous papers showing Dr. Moran’s contribution to the OAA including a facilitator (see Ex. 1170; Ex. 1174, 1– 2), and the ’931 patent (Ex. 2002). See Pet. Reply 5–7, 8, 12–13; Pet. Remand 11. In particular, Dr. Moran’s testimony establishes that he contributed to Section 4.5, the facilitator that plays an essential role in the OAA, that differs from prior art agents, and that is found in the ’115 specification. We find Dr. Moran’s contributions to be significant when measured against the full anticipating Martin reference, and to render him a joint inventor of the Martin reference. Google, 34 F.4th at 1085 (quoting Duncan Parking, 914 F.3d at 1358). 5. Conclusion Based on the full record, we find that Petitioner has provided persuasive evidence by a preponderance of the evidence that Dr. Moran is an inventive entity to the Martin reference. Accordingly, we find that Petitioner has established that Martin is “by another” and is prior art under § 102(a) to the ’115 patent. We next turn to the sole remaining ground based on the Martin reference to determine the patentability of the remaining challenged claim.” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“combination of Martin and Kohn. Petitioner’s expert, Dr. Olsen, provides persuasive testimony and evidence that Martin teaches compound goals and a skilled artisan would have been motivated in view of Kohn to modify Martin’s facilitator agent to interpret a compound goal that includes both local and global constraints. Pet. 32–34; Ex. 1002 ¶¶ 49, 77–88. Dr. Olsen’s testimony does not evince hindsight, but instead supports the finding that an ordinarily skilled artisan could use compound goals required in Martin and apply the type of constraints (global and local) disclosed in Kohn. Ex. 2024, 159:4–160:16. In addition, Dr. Olsen testified, the proposed implementation “would have been a mere combination of known components and technologies . . . , according to known methods, to produce predictable results.” Ex. 1002 ¶ 87. We do not agree that this case presents the same technical issues raised in G.B.T. Inc. v. Walletex Microelectronics Ltd., IPR2018-00326, Paper 60 at 16–17 (PTAB June 25, 2019), where the petitioner’s declarant failed to show how the combination would have achieved desired results and features from the combination of the circuits. Here, Dr. Olsen identified known compound goals in Martin to which Kohn’s local and global constraints are applicable. Pet. 32–34; Ex. 1002 ¶¶ 49, 77–88. In view of the level of skill in the art and the testimony of Dr. Olsen (Ex. 1002 ¶¶ 49, 77–88; Ex. 2024, 159:4–160:16), we find that Petitioner establishes persuasive motivation to combine the software teachings of Kohn’s constraints into the goals of Martin and how the references would have been combined by a preponderance of the evidence.” slip op. at 29
- ExcludeMotion to exclude, deniedMotion to exclude, grantedMixed
“III. MOTION TO EXCLUDE In our prior Final Written Decision, we denied Patent Owner’s Motion to Exclude (1) portions of Exhibit 1153; (2) Exhibits 1170, 1171, and 1172; (3) Exhibit 1174; and (4) portions of Exhibits 2037 and 2038; and we dismissed as moot Patent Owner’s Motion to Exclude (1) Exhibits 1158 and 1159 and (2) Exhibits 1175, 1176, and 1181. Final Dec. 25–28. We maintain these determinations on remand.” slip op. at 30
Patent outcomesUS 6,851,115 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 6,851,115 - Tokyo Ohka Kogyo., Ltd. v. Fujifilm Electronic Materials U.S.A., Inc.All claims unpatentablePTAB · May 31, 2023 · PGR2022-00010 · APJ Jo-Anne M Kokoski · PGR · Final written decision
Claims 1–15 are unpatentable for lack of written description support under § 112(a); the Board did not reach either obviousness ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person having ordinary skill in the art (“POSA”) “would have had a Bachelor degree in materials science, engineering, chemistry or similar technical discipline, and had at least two years of experience relating to the design and development of semiconductor manufacturing processes.” Pet. 14. Petitioner further submits that, “[a]lternatively, such a person may have had additional graduate education as a substitute for professional experience, or significant work experience as a substitute for formal education.” Id. Patent Owner states that, “[w]ithout taking a position on the correctness of this definition, Patent Owner applies Petitioner’s POSA definition.” PO Resp. 11 (citing Pet. 14). 3 The Leahy-Smith America Invents Act (“AIA”), Pub. L. No. 112–29, 125 Stat. 284 (2011), revised 35 U.S.C. § 103 effective March 16, 2013. Petitioner contends, and Patent Owner does not contest, that “the earliest priority date claimed by the ’329 patent” is December 6, 2013. Pet. 13; PO Resp. 6. Because the undisputed earliest claimed priority date of the ’329 patent is after March 16, 2013, we apply the AIA versions of §§ 102 and 103. record, and is consistent with the level of skill in the art at the time of the invention as reflected in the prior art in this proceeding.” slip op. at 5
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree. It is clear from the plain language of claim 1 that the claimed “cleaning composition” is a composition for cleaning that includes four named components and has a specified pH. Ex. 1001, 29:2–9. The ’329 patent specification unambiguously teaches that the cleaning composition is for removing residues from semiconductor substrates. Id. at 1:23–29, 2:10–12, 2:17–33, 15:52–55. Although the ’329 patent describes a cleaning composition that comprises a redox agent, a chelating agent, a metal corrosion inhibitor, an organic solvent, and water, we see no reason to construe the term “cleaning composition” itself to require these components. Claim 1 expressly recites expressly including or precluding a chelating agent or a metal corrosion inhibitor. Ex. 1001, 29:2–9. The Federal Circuit advises that the specification “is not a suitable substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n. 14 (Fed. Cir. 1985) (en banc)). The ’329 patent specification does teach a cleaning composition that includes a redox agent, a chelating agent, a metal corrosion inhibitor, an organic solvent, and water, but claim 1 is directed to a cleaning composition that expressly requires only a subset of those components. Patent Owner’s proposed construction would effectively rewrite the claim by adding unclaimed components, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”).” slip op. at 9
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable
“that Petitioner establishes that the ’329 patent does not provide sufficient written description support for the challenged claims. Pet. 15–43; Ex. 1007 ¶¶ 56–82. More specifically, we find that the ’329 patent does not reasonably convey to a POSA that the inventor was in possession of cleaning compositions that do not include a chelating agent or a metal corrosion inhibitor. There is no dispute, on this record, that the ’329 patent specification explicitly teaches that a redox agent, a chelating agent, a metal corrosion inhibitor, an organic solvent, and water are mandatory components of the cleaning composition described therein. PO Resp. 15 (Patent Owner agreeing with Petitioner that “[t]he ’329 patent’s disclosure is unambiguously explicit regarding mandatory components of the cleaning compositions described therein.” (citing Pet. 17; Ex. 1007 ¶¶ 56–57) (emphasis omitted, alteration in original)); see Ex. 1001, 3:47–48, 3:62–64, 10:24–26, 10:66–11:2, 12:3–4; Ex. 1007 ¶¶ 56–67. Claim 1, however, does not require that the cleaning composition include a chelating agent or a metal corrosion inhibitor. Ex. 1001, 29:2–9. Therefore, establishing proper written description support for claim 1 requires more than showing that the inventor was in possession of a cleaning composition that includes a redox agent, a chelating agent, a metal corrosion inhibitor, an organic solvent, and water; the ’329 patent must also show that the inventor was in possession of a cleaning composition that includes only a redox agent (hydroxylamine), an organic solvent (an alkylene glycol), water, and an alkanolamine. Id.” slip op. at 13
Patent outcomesUS 10,927,329 unpatentableClaim construction§ 112 disclosurecites PhillipsPatents in suitUS 10,927,329 - Home Depot U.S.A., Inc. v. Lynk Labs, Inc.All claims unpatentablePTAB · May 22, 2023 · PGR2022-00009 · APJ Monica S Ullagaddi · PGR · Final written decision
Claims 1–5, 7–12, and 14–19 are unpatentable based on lack of written description, anticipation by Bruning, or obviousness over Bruning and Kabel.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“lighting device.” Accordingly, we determine that the level of ordinary skill in the art is “a bachelor’s degree in electrical engineering, or similar technical field, with two years of relevant experience in the field of design and/or development of LEDs and circuits,” as Petitioner proposes and that “the field of design and/or development” would be “in the context of lighting devices” as Patent Owner proposes, in which “[a]n increase in experience could compensate for less education.” Id.; Pet. 24 (citing Ex. 1002 ¶ 46).” slip op. at 15
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“theoretically fall under the “or greater” portion of the amended claim limitation “forward voltage of 6V or greater,” Applicant distinguished Colby on the basis that the 120V AC voltage from a wall outlet is not “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs.” See Ex. 1023, 9 (emphasis added). Applicant’s argument specifically identifies the claim language at issue––“forward voltage of 6V or greater”––and specifically states that it is not disclosed because Colby does not disclose the minimum voltage and instead, discloses something else, something larger–– 120V AC voltage. Accordingly, we conclude that Applicant disclaimed any voltage that is more than “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs” from the scope of “forward voltage.”” slip op. at 25
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable
“4. 35 U.S.C. § 112(a) With respect to the written description requirement, we are persuaded” slip op. at 32
- Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable
“Basis § Unpatentable Unpatentable Lack of written description, 3, 10, 17 112(a) 3, 10, 17 Lack of enablement 3, 10, 17 112(b) Indefiniteness 3, 10, 17 Lack of written description, 4, 11, 18 112(a) 4, 11, 18 Lack of enablement 4, 11, 18 112(b) indefiniteness 4, 11, 18” slip op. at 77
Patent outcomesUS 10,932,341 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 10,932,341 - Laltitude LLC, Dba Picasso Tiles v. Altus Holdings, Inc.All claims unpatentablePTAB · May 10, 2023 · IPR2022-00155 · APJ Bart A Gerstenblith · IPR · Final written decision
The sole challenged claim was held unpatentable as anticipated by Zhao US and Zhao CN; the Board did not reach the three obviousness grounds.
RulingsFinal written decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“same as that used for infringement, except that for anticipation, the patented design is compared with the alleged anticipatory reference rather than an accused design. Int’l Seaway Trading Corp. v. Walgreens Corp., 589 F.3d 1233, 1238, 1240 (Fed. Cir. 2009). The ordinary observer test for design patent infringement was first enunciated by the Supreme Court in Gorham Co. v. White, 81 U.S. 511 (1871), as follows: [I]f, in the eye of an ordinary observer, giving such attention as a purchaser usually gives, two designs are substantially the same, if the resemblance is such as to deceive such an observer, inducing him to purchase one supposing it to be the other, the first one patented is infringed by the other. Id. at 528. The ordinary observer test requires the fact finder to consider all of the ornamental features illustrated in the figures that are visible at any time in the “normal use” lifetime of the accused product, i.e., “from the completion of manufacture or assembly until the ultimate destruction, loss, or disappearance of the article.” Int’l Seaway, 589 F.3d at 1241. Further, while the ordinary observer test requires consideration of the overall prior art and claimed designs, [t]he mandated overall comparison is a comparison taking into account significant differences between the two designs, not minor or trivial differences that necessarily exist between any two designs that are not exact copies of one another. Just as “minor differences between a patented design and an accused article’s design cannot, and shall not, prevent a finding of infringement” . . . so too minor differences cannot prevent a finding of anticipation. Id. at 1243 (citation omitted) (quoting Litton Sys., Inc. v. Whirlpool Corp., 728 F.2d 1423, 1444 (1984)).” slip op. at 8
Patent outcomesUS D719,138 unpatentable§ 102 anticipation
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.