- Xencor, Inc. v. Merus N.V.InstitutedPTAB · Sep 26, 2025 · IPR2025-00604 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1, 2, 7–24, 26–28, and 30–32 on all four grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in an inter partes review. We may institute an inter partes review if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’286 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSA at the time of the alleged invention would have at least an advanced degree (e.g., a Master’s or Ph.D.) in biochemistry, process chemistry, protein chemistry, chemical engineering, molecular and structural biology, biochemical engineering, or similar disciplines; several years of post-graduate training or related experience (including industry experience) in one or more of these areas; and two or more years of experience in the production of bispecific antibodies. (EX1002, ¶¶16-17.) Pet. 15. Patent Owner states, “[f]or purposes of the Preliminary Response, Patent Owner applies Petitioner’s proposed definition of a POSA.” Prelim. Resp. 10. At this point, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the level of skill in the art reflected in the prior art of record and the ’286 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). C.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningNo construction neededDecided for petitioner
“The ’286 patent uses the term “heavy chain” or “heavy chains” repeatedly; however, we find no express definition of the term. See generally Ex. 1001. Rather, the ’286 patent uses the term “heavy chain” in relation to antibody structure in a way that suggests the term is standard and well known in the art. See, e.g., id. at 3:19–59 (Background). The parties’ briefing on the technology reinforces this fact. See Pet. 5–14 (“The basic structure of natural IgG comprises four protein chains—two identical heavy chains (shown in red) and two identical light chains (shown in blue)—which are arranged in a Y-shaped configuration: . . . (EX1013, 112-13; EX1002, ¶¶23-30.)”); Prelim. Resp. 3–4 (“Natural or wild type Igs have a particular structure made of two identical light (L) chains and two identical heavy (H) chains. See EX2008 at ¶ 23. Each Ig heavy chain consists of three constant domains (CH1, CH2, and CH3) and one variable domain (VH), which is also isotypes, or a functional derivative and/or fragment of these. In a preferred embodiment, Ig-like molecules are produced that are antibodies of the IgG isotype because IgG antibodies e.g. have a longer half life as compared to antibodies of other isotypes. Ex. 1001, 11:9–21. As noted above (see supra Section I.C), IgG antibodies’ heavy chains have three constant domains, but IgE and IgM have four. Thus, Patent Owner’s argument that heavy chain means one variable and three constant domains, and two differently-binding Fab arms, ignores embodiments of the invention. consistent with the definition of heavy chain in the ’286 Patent. See EX2008 at ¶ 24; EX1001 at 11:58–66.”). This is also how the ’286 patent generally uses the term. See Ex. 1001, 11:58–12:1. But, the Specification does not limit its embodiments to only IgG antibodies because it also describes that the invention may be “IgG1, IgG2, IgG3, IgG4, IgA, IgE, and IgM” type antibodies, and fragments. Ex. 1001, 11:9–21; see also supra n.10 (quoting the ’286 patent’s definition of antibody). Other embodiments would not necessarily have the heavy chains as argued by Patent Owner. There is no evidence of record that the ’286 patent’s claims or the Specification generally use or limit the term “heavy chains” (or “heavy chain”) in any way deviating from its ordinary and customary meaning in the art. Therefore, at this stage of the proceeding, we decline to expressly interpret this claim language. 2. Summary on Claim Construction At this stage of the proceeding, we expressly construe no claim terms and give each claim term the ordinary and customary meaning it would have had to the person of ordinary skill in the art as of the invention date. See Nidec Motor Corp., 868 F.3d at 1017. If either party intends to further argue claim construction at trial, they should do so in a clearly designated section of their briefing so as to expressly identify such arguments. See, e.g., 37 C.F.R. § 42.104(b)(3) (content of petition); see also Board’s Consolidated Trial Practice Guide (CTPG) at 46, 48–45 (Nov. 2019).12 Claim construction arguments should not be relegated to patentability arguments on the facts.” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“In brief summary, these limitations require one CH3 heavy chain to have a positive amino acid substituted in place of a neutral one, the other CH3 heavy chain to have a negative amino acid substituted in place of a neutral one, and that when the heavy chains are expressed by culturing the host cell these positive and negative amino acids interact and the antibody produced is a heterodimeric antibody. Petitioner asserts that Lazar expressly teaches engineering two CH3 domains so that, when expressed, they interact and form a heterodimeric CH3 interface by making neutral-to-positive and neutral-to-negative amino acid substitutions at known interacting residues on each CH3 domain, e.g., S364E (changing neutral serine to negative glutamic acid at residue 364) on one CH3 domain, and L368K (changing neutral leucine to positive lysine at residue 368) on the other CH3 domain; or T366D (swapping neutral threonine for negative aspartic acid at residue 366) on one CH3 domain and L351K (swapping neutral leucine for positive lysine at residue 351) on the other CH3 domain; that these residues were known in the art to be respective interfacing contact residues; that these modifications favor Fc heterodimerization; and that they result in a heterodimeric antibody (proof-of-concept shown by synthesizing and screening). Pet. 23–28 (citing Ex. 1001, 13:1–17, 17:67–18:3, 19:5–12; Ex. 1002 ¶¶ 111–119; Ex. 1004 ¶¶ 121, 183, 241 (Tables 1, 2); Ex. 1007, 8:9–10, 17:19–20 (Table 1); Ex. 1008, 244–36).” slip op. at 29
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 9,358,286 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Precision Planting LLC v. Maschio Gaspardo S.P.A.No claims unpatentablePTAB · Mar 21, 2025 · IPR2024-00008 · APJ Benjamin D M Wood · IPR · Final written decision
Claims 1–5, 7–14, and 16 were not shown unpatentable because the asserted anticipation and obviousness grounds failed to establish the claimed thrust-bearing element and its required location.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“We determine that the evidence of record overcomes the presumption that § 112, para. 6 does not apply because “thrust-bearing element” does not recite sufficiently definite structure in this case. See, e.g., Pet. 22 (the term is not used here according to its common meaning). First, the word “element” is a “[g]eneric term[]” or “verbal construct[]” often “used in a claim in a manner that is tantamount to using the word ‘means’” because it does not “connote sufficiently definite structure.” Williamson, 792 F.3d at 1350. We find nothing in the ’121 patent or elsewhere in the record suggesting that “element” in the term “thrust-bearing element” should be considered other than a generic placeholder term. Second, although the term “thrust bearing” may connote certain structure, “thrust-bearing element” does not. A “thrust bearing” is “a well-known term of art in engineering and is ‘a bearing which sustains axial loads and prevents axial movement of a loaded shaft.’” Ex. 1003 ¶ 46 (citing Ex. 1017, 2147). “The balls of traditional thrust bearings are positioned inline with the axial force, as thrust bearings are designed specifically to transmit axial load.” Id. Here, however, “thrust-bearing” is hyphenated, and is therefore a phrasal adjective modifying “element” rather than the noun phrase “thrust bearing.”8 Further, there are “substantial differences”” slip op. at 15
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for patent owner
“We largely agree with Petitioner. “[S]tructure disclosed in the specification is ‘corresponding’ structure only if the specification or prosecution history clearly links or associates that structure to the function recited in the claim.” B. Braun Med. Inc. v. Abbott Labs., 124 F.3d 1419, 1424 (Fed.Cir.1997). The Specification of the ’121 patent “clearly links or associates” two components with the function of bearing axial thrust from the sowing disc: shaft 27 with flanging 30, and thrust-bearing plate 31. Ex. 1001, 3:25–35. Thrust-bearing plate 31 is expressly described as “bear[ing] on that surface of the disc which faces seal 24 . . . in order to withstand at least some of the axial load produced by the disc 16 on the seal 24. Ex. 1001, 3:28–31. Rotatably-mounted shaft 27 with flanging 30 is “fixed” to thrust-bearing plate 31 and therefore bears the axial load from the disc via the thrust-bearing plate. Id. at 3:25–28.10 10 Drive element 32 is described as part of thrust-bearing element 26 and permits thrust-bearing element 26 to be driven in rotation with sowing disc 16. Ex. 1001, 3:36–40. It is not described as bearing any axial load, however. Further, it is not necessary for the thrust-bearing element to rotate with the sowing disc for that element to bear axial load from the sowing disc. See id. at 3:58–59 (“Provision is also made for the thrust-bearing element 26 to be made idle and not driven in rotation by the [drive] shaft 20.”). Ultimately, however, whether drive element 32 is properly considered as part of the corresponding structure is not relevant to the outcome of this case. We disagree with Patent Owner that bearings 28 and seat 29 should be considered corresponding structure. The Specification does not associate these structures with any axial load-bearing function. Instead, bearings 28 and seat 29 are described as the means by which, and the location in which, shaft 27 is rotatably mounted. Ex. 1001, 3:25–27. Regardless, whether or not bearings 28 and seat 29 are considered corresponding structure does not affect the outcome of this case. In summary, we construe “thrust-bearing element” as a means-plus- function claim term under 35 U.S.C. § 112, para. 6. Its recited function is to bear thrust, or more specifically to “withstand at least some of the axial load produced by the disc on the seal.” The structure described in the Specification as corresponding to this function is shaft 27 with flanging 30, and thrust-bearing plate 31. We construe the limitation as directed to this structure, and equivalent structures.” slip op. at 21
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“The question is not whether the patentee disclaimed coverage over structures in which the thrust-bearing element is not located entirely in the movable portion of the housing. Instead, we must simply ascertain what the patentee meant by “supported rotatably in the movable portion.” To answer this question, we look to the Specification, which “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315. “The construction that stays true to the claim language and most naturally aligns with the patent’s description of the invention will be, in the end, the correct construction.” Id. at 1316. Here, it is undisputed that in the sole embodiment described by the ’121 patent, the thrust-bearing element is supported by and entirely within the movable portion of the housing. Ex. 1001, Figs. 1, 2; Pet Post-Hearing Resp. 1; PO Post-Hearing Resp. 2. Construing “in the movable portion” to require the thrust-bearing element to be entirely within the movable portion both “stays true to the claim language and most naturally aligns” with the sole disclosed embodiment. Such a construction does not import the word “entirely” from the sole embodiment into the claims because the construction “arises from the claim language itself.” See SharkNinja Operating LLC v. iRobot Corp., 2024 WL 1132219, *2–*3 (Fed. Cir. 2024) (construing “primary brush assembly disposed within the round housing perimeter” to require that the primary brush assembly be “entirely within” the round housing perimeter is not an improper incorporation of “entirely” from embodiments into the claims because the construction “arises from the claim language itself”). Accordingly, having reviewed the complete record and the parties’ pre- and post-hearing briefing, we determine that “supported rotatably in the movable portion” means supported rotatably entirely in the space defined by the movable portion.” slip op. at 25
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“b. When “Thrust-Bearing Element” is Construed as a Means-Plus-Function Claim Limitation, there is Insufficient Evidence in the Record to Support a Finding that VenHuizen Discloses a Thrust- Bearing Element that is Supported Rotatably in the Movable Portion As noted above, Petitioner contends that VenHuizen’s shaft 55, retaining hub 56, and handle 58 together constitute the claimed thrust-bearing element “under a proper means-plus-function definition.” Pet. Reply 18–19.12 We do not discern sufficient evidence of record or persuasive technical reasoning from Petitioner to support a finding that these elements together are “supported rotatably in the movable portion” of the housing, as claim 1 requires. Ex. 1001, 4:38–39. We construed this limitation to require the thrust-bearing element to be supported rotatably entirely in the space defined by the movable portion (the space defined by VenHuizen’s second housing member 90). Petitioner does not contend, much less show, that these components are supported rotatably entirely in the movable second housing member 90. On the contrary, of the three components constituting VenHuizen’s thrust-bearing element, all of retaining hub 56 and most of shaft 55 are located in the fixed portion of the housing (first housing member 50), not the movable portion 90. See Ex. 1001, Fig. 6. Only handle 58 is ever located in the movable portion (when the fixed and movable portions are joined together). See id. Accordingly, Petitioner has not shown that VenHuizen discloses a thrust-bearing element rotatably supported in the movable portion.” slip op. at 35
Patent outcomesUS 8,770,121 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,770,121 - Mastercard Incorporated And Mastercard International Incorporated v. Ov Loop, Inc.All claims unpatentablePTAB · Mar 19, 2025 · IPR2023-01289 · APJ James A Tartal · IPR · Final written decision
Claims 1–33 are unpatentable as obvious over Collinge; the Board did not reach the anticipation grounds based on Collinge or the grounds based on Fiske.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner asserts that a person of ordinary skill in the art would have had “the equivalent of an undergraduate degree in electrical and computer engineering (or a related field) and approximately two years of work experience in the field of secure payment system,” and that “[a]dditional education in the field could be substituted for industry experience, and vice versa.” PO Resp. 4. Patent Owner does not suggest that its proposed level of ordinary skill materially differs from the level of skill proposed by Petitioner. See id. We find, on the current record, that the ’171 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references and in the ’171 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. Accordingly, we adopt Petitioner’s proposed level of ordinary skill. We would have reached the same conclusions in this Decision had we adopted Patent Owner’s proposed level of ordinary skill in the art.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In light of the lack of any dispute over the Second Construction, a construction we find consistent with the ordinary and customary meaning of the claim language, we need not resolve whether the claim language also encompasses Petitioner’s First Construction. Moreover, as explained below, we find Collinge renders obvious the subject matter of the limitation under either construction. See infra Section III.D.5. For the foregoing reasons, we find that an express construction of any claim term is not necessary for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 16
- Obviousness (§103) › Analogous artNot reached
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We disagree with Patent Owner’s arguments because here Petitioner is not relying on some other disclosure to fill a missing limitation absent from Collinge, but is instead relying only on Collinge and the knowledge a person of ordinary skill in the art would possess when appreciating the teachings of Collinge. Petitioner is not suggesting Collinge needed to be modified to add the use of an APDU, but, rather, that Collinge’s disclosure already contemplated it based on the well-known background of the art. Petitioner shows by a preponderance of the evidence that “the Collinge Provisionals state the disclosures therein are intended to be used in a ‘standard’ PayPass transaction,” and that a person of ordinary skill in the art would have considered “the PayPass Specification (and EMV Specifications, with which the PayPass Specification complies) when reading Collinge.” Pet. Reply 8 (citing Ex. 1009, 8, 14–15, 22–23; Ex. 1050 ¶ 22). in a “standard” PayPass transaction and that a person of ordinary skill in the art would have known, at a minimum, that it would have been obvious from Collinge that the “first set of data” (i.e., the encrypted payload in Collinge) would have been “usable” by the application of Collinge “to formulate an application protocol data unit response,” as required by limitation [1.C]. Petitioner further demonstrates how Collinge discloses that the “first set of data” was “useable by the application to formulate” an APDU response in addressing limitation [1.E–3], which specifically requires “generating a response.” See Pet. Reply 11 (explaining that “[d]etails of how [the encrypted payload] is used to formulate an APDU response are explained where that is separately claimed”); see also id. (citing Pet. 48–50 (addressing limitation [1.E-3])).” slip op. at 36
Patent outcomesUS 10,032,171 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,032,171 - PTAB · Jan 27, 2025 · IPR2024-00965 · APJ Zhenyu Yang · IPR · Institution
Instituted review of claims 1–6 on all asserted grounds because Petitioner showed a reasonable likelihood of prevailing on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has satisfied the threshold requirement set forth in 35 U.S.C. § 314(a). Accordingly, we institute inter partes review of all challenged claims based on the ground raised in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedInstituted
“We agree with Patent Owner that testimony from a “custodian with any personal knowledge of arXiv.org or its regular practices” would have strengthened Petitioner’s argument that Gloor is prior art. See Prelim. Resp. 20; see also, e.g., Murray & Poole Enters. LTD v. Institut De Cardiologie De Montreal, IPR2023-01064, Paper 49 (PTAB Jan. 14, 2025) (considering testimony regarding the internet archive service known as the Wayback Machine (https://web.archive.org/) in determining public accessibility). At the institution stage, however, Petitioner needs to show that Gloor qualifies as prior art by “a reasonable likelihood” standard. See Hulu, LLC, v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 13 (PTAB Dec. 20, 2019) (precedential) (“[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.”). We find that, for purposes of institution, Petitioner has met its burden to show a reasonable likelihood that Gloor was publicly accessible before the priority date of the ’200 patent. To prevail in this inter partes review, Petitioner must meet the preponderance of the evidence standard. See 35 U.S.C. § 316(e). Thus, we encourage the parties to fully develop the record during trial to facilitate the ultimate resolution of this issue.” slip op. at 9
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“institution under § 325(d). Prelim. Resp. 21–29. Under 35 U.S.C. § 325(d), in determining whether to institute an inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” Our § 325(d) analysis employs a two-prong framework: (1) whether the arguments presented in the petition are the same or substantially the same as those previously presented to the Office; and (2) if so, whether the petitioner has demonstrated a material error by the Office in its prior consideration of those arguments. Advanced Bionics, LLC v. Med-El Electromedizinishe Gerӓte GmbH, IPR2019-01469, Paper 6 (“Advanced Bionics”), 8 (PTAB Feb. 13, 2020) (precedential).” slip op. at 11
§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 11,768,200 - PTAB · Jan 27, 2025 · IPR2024-00964 · APJ Zhenyu Yang · IPR · Institution
The Board instituted IPR on claims 1–8 based on both asserted obviousness grounds: Parameswaran with Gloor and Parameswaran with Bentley.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has satisfied the threshold requirement set forth in 35 U.S.C. § 314(a). Accordingly, we institute inter partes review of all challenged claims based on the ground raised in the Petition.” slip op. at 2
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“We agree with Patent Owner that testimony from a “custodian with any personal knowledge of arXiv.org or its regular practices” would have strengthened Petitioner’s argument that Gloor is prior art. See Prelim. Resp. 27; see also, e.g., Murray & Poole Enters. LTD v. Institut De Cardiologie De Montreal, IPR2023-01064, Paper 49 (PTAB Jan. 14, 2025) (considering testimony regarding the internet archive service known as the Wayback Machine (https://web.archive.org/) in determining public accessibility). At the institution stage, however, Petitioner needs to show that Gloor qualifies as prior art by “a reasonable likelihood” standard. See Hulu, LLC, v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 13 (PTAB Dec. 20, 2019) (precedential) (“[A]t the institution stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.”). We find that, for the purposes of institution, with Dr. Gloor’s declaration and the supporting exhibits attached therein, Petitioner has met this burden. To prevail in this inter partes review, Petitioner must meet the preponderance of the evidence standard. See 35 U.S.C. § 316(e). Thus, we encourage the parties to fully develop the record during trial to facilitate the ultimate resolution of this issue.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“detailed analysis to support its argument that the combination of Parameswaran and Gloor teaches or suggests each limitation of claim 1. Pet. 23–36. Petitioner also contends that an ordinarily skilled artisan would have been motivated combine the teachings of the two references and would have had a reasonable expectation of success in doing so. Id. at 36–45. Patent Owner counters that the combination does not teach or suggest two limitations, namely the amplifying and discarding steps of the method. Prelim. Resp. 18–24. Patent Owner also challenges Gloor’s prior art status. Id. at 24–28. Based on the current record, we find Petitioner’s argument with respect to the amplifying and discarding steps more persuasive. With respect to the remaining limitations, we find persuasive Petitioner’s analysis on the prior art’s teachings. We also find persuasive Petitioner’s analysis on the motivation to combine and reasonable expectation of success. For the purposes of institution, we adopt those analyses as our own. We address Patent Owner’s counterarguments below.” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“cross-over events (id. at 18–21). Based on the current record, we find Petitioner’s argument more persuasive. Petitioner relies on the combination of Parameswaran and Gloor as teaching the amplifying step. See Pet. 31–33. As such, Patent Owner cannot show non-obviousness “by attacking references individually.” In re Keller, 642 F.2d 413, 426 (CCPA 1981). Patent Owner argues that “because Parameswaran used pyrosequencing on the surface of beads in a Roche 454 sequencer, it does not disclose the formation of clusters.” Prelim. Resp. 21 (citing Pet. 31). Petitioner, however, relies on Gloor for teaching “amplifying said nucleic acid templates on a surface of a flow cell thereby to form clusters.” Pet. 31–32. Patent Owner does not challenge this reliance. See generally Prelim. Resp. Patent Owner contends that Petitioner “equat[es] the claimed chimeric sequences with ‘mismatched’ or ‘misassigned’ sequences containing an ‘unexpected’ pair of forward and reverse barcode motifs identified in Parameswaran.” Prelim. Resp. 18–19. But, according to Patent Owner, “Petitioner does not point to any disclosure in Parameswaran identifying these “mismatched” motifs as chimeric sequences—as opposed to mere sequencing or sample handling error—nor does Petitioner cite any disclosure in Parameswaran regarding such sequences resulting from cross-over events.” Id. at 19. We find Patent Owner’s characterization of Petitioner’s argument inaccurate. As we understand it, Petitioner does not “equat[e]” the claimed chimeric sequences with “mismatched” sequences in Parameswaran. Instead, as Patent Owner acknowledges, “Petitioner argues that ‘sequences with mismatched barcode motifs’ in Parameswaran ‘include chimeric sequences resulting from cross-over events.’” Id. (quoting Pet. 32) (emphasis added).” slip op. at 14
§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,041,852 - PTAB · Jan 13, 2025 · IPR2024-01156 · APJ Jeffrey N Fredman · IPR · Institution
The Board instituted inter partes review of claims 1–30 on all grounds, finding it more likely than not that the claims are unpatentable.
RulingsInstitution decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the current record, there is no controversy over the meaning of any of the claim terms and neither party identifies a claim construction that would impact our analysis. We therefore find that, at this stage of the proceeding, there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“VIII. LEVEL OF ORDINARY SKILL IN THE ART Petitioner asserts (without opposition): A person of ordinary skill in the art (“POSA”) at the time of invention would have a working knowledge of microbiology and would have been involved in developing testing methodologies for analysis of samples such as food products (“validation methodologies”). The POSA would most likely have an advanced degree in microbiology, food science, or animal science and at least two years of work experience but may alternatively have a bachelor’s degree in those areas and at least four years of experience with validation methodologies. The POSA would have been familiar with relevant scientific literature and industry regulations, directives, and guidelines relating to validation methodologies.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“Determining whether claims are anticipated involves a two-step analysis. The first step involves construction of the claims of the patent at issue. Claim construction is a question of law reviewed de novo.” In re Aoyama, 656 F.3d 1293, 1296 (Fed.Cir.2011). “The second step [of an anticipation analysis] involves comparing the claims to the prior art. Anticipation is a question of fact reviewed for substantial evidence.” In re Aoyama, 656 F.3d at 1296. “A prior art reference anticipates a patent claim under 35 U.S.C. § 102(b) if it discloses every claim limitation.” In re Montgomery, 677 F.3d 1375, 1379 (Fed. Cir. 2012). A reference may anticipate inherently if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“The motivation-to-combine analysis is a flexible one. “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed,” [but the] “analysis ‘need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.’” Intel Corp. v. PACT XXP Schweiz AG, 61 F.4th 1373, 1379–80 (Fed. Cir. 2023) (quoting KSR, 550 U.S. at 418, 420 (emphasis added)). “[I]f there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine,” because KSR explains that “if a technique has been used to improve one device [or method], and a person of ordinary skill in the art would recognize that it would improve similar devices [or methods] in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” Id. at 1380 (quoting KSR, 550 U.S. at 417; and Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 797 (Fed. Cir. 2021)). If addressing a known problem, the prior art combination need not be “the best option, only . . . a suitable option.” Id. (quoting Intel, 21 F.4th at 800 (emphasis original)).” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,845,486 - PTAB · Nov 8, 2024 · IPR2024-00834 · APJ Tawen Chang · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood of unpatentability and declining discretionary denial under §§ 325(d) and 314.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (2012) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). The Board may authorize an inter partes review if we determine that the information presented in the Petition and Patent Owner’s Preliminary Response shows a reasonable likelihood that Petitioner will prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314(a).” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“anticipated by Sonti. Pet. 3. To show anticipation under 35 U.S.C. § 102, each and every claim element, arranged as in the claim, must be found in a single prior art reference. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359 (Fed. Cir. 2008). The prior art need not, however, use the same words as the claims to find anticipation. In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009). In evaluating anticipation, it is permissible to take into account not only the literal teachings of the prior art reference, but also the inferences the skilled artisan would draw from it. Eli Lilly and Co. v. Los Angeles Biomedical Res. Inst. At Harbor-UCLA Med. Ctr., 849 F.3d 1073, 1074–75 (Fed. Cir. 2017) (holding that the “dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference”). As such, “a reference can anticipate a claim even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Kennametal, Inc. v. Ingersoll Cutting Tool Co., 780 F.3d 1376, 1381 (Fed. Cir. 2015) (internal quotation and alteration marks omitted).” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“b. Reasonable Expectation of Success Petitioner asserts that an ordinarily skilled artisan would have been motivated, with a reasonable expectation of success, to topically administer 1% tapinarof composition once a day to treat mild to severe plaque psoriasis in view of Sonti’s teaching to apply its compositions (including 1% tapinarof compositions) in various application frequencies (including once daily) to treat moderate to severe plaque psoriasis. Pet. 29–30 (citing, e.g., Ex. 1003 ¶¶ 182–184, 187–188; Ex. 1005 Abstract, ¶¶ 55, 196, 288, 387).” slip op. at 32
- Obviousness (§103) › Objective indicia / secondary considerationsInstituted
“d. Objective Indicia of Non-obviousness Patent Owner asserts that, although the “Petition notes the patent’s ‘surprising[] and unexpected[]’ finding that once daily application of 1% tapinarof cream was just effective as twice daily application, . . . the Petition does not analyze, as the law requires, this surprising, unexpected finding in its obviousness arguments.” Prelim. Resp. 52. We are not persuaded by this argument. Immediately after the Petition’s acknowledgement that “[t]he specification [of the ’088 patent] contends that it was ‘surprisingly’ found that once daily application was just as effective as twice daily,” the Petition notes that, “[h]owever, during prosecution the examiner cited a set of prior art by Chen et al. disclosing treating plaque psoriasis by topically applying a composition containing 1% tapinarof once a day.” Pet. 1 (footnote omitted). Indeed, Patent Owner acknowledges that Petitioner counters “Applicant’s surprising and unexpected findings” by referring to the Chen references cited during prosecution, but asserts that “Chen . . . does not undermine Applicant’s surprising and unexpected findings” because “Chen discloses applying a composition containing 1% mixture of cis and trans 3,5-dihydroxy-4-isopropylstilbene, and not one containing 1% tapinarof (3,5-dihydroxy-4-isopropyl-trans-stilbene).” Prelim. Resp. 52–53.16 As 16 Patent Owner refers to its earlier discussion on this issue. Prelim. Resp. 53 (“As already discussed . . .”). That earlier discussion is with respect to the Chen references cited in Sonti (i.e., Exs. 1012 & 1013), not the Chen 40” slip op. at 40
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,590,088 - Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentablePTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision
Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.
RulingsFinal written decision- BurdenMixed
“It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19
Patent outcomesUS 11,298,166 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,298,166 - PTAB · Oct 9, 2024 · IPR2024-00733 · APJ Matthew S Meyers · IPR · Institution
The Board instituted IPR on claims 1–14 and all asserted grounds, finding a reasonable likelihood of success based on anticipation by Liddell and obviousness over Simpson and Liddell.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“determine whether to institute an inter partes review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2020). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.”” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble not limitingTerm construed petitioner constructionDecided for petitioner
“preamble term “hand carriable” does not limit the claimed apparatuses. “[A] preamble is not limiting ‘where a patentee defines a structurally complete invention in the claim body and uses the preamble only to state a purpose or intended use for the invention.’” Catalina Marketing, 289 F.3d at 808 (quoting Rowe v. Dror, 112 F.3d 473, 478 (Fed. Cir. 1997)). This rule against giving effect to intended-use language in the preamble “reflects a longstanding substantive aspect of the patent statue—specifically, the ‘well settled’ fundamental principle ‘that the recitation of a new intended use for an old product does not make a claim to that old product patentable.’” Arctic Cat Inc. v. GEP Power Products, Inc., 919 F.3d 1320, 1328 (Fed. Cir. 2019) (quoting In re Schreiber, 128 F.3d 1473, 1477 (Fed. Cir. 1997)). In this case, we view the phrase “hand carriable,” as it appears in the preamble, to be indicative of an intended use of the claimed apparatuses, rather than a structural limitation, and as such, we do not see it to be limiting based on the current record. Patent Owner does not point to any particular structural limitation required by the preamble term “hand carriable.” See Prelim. Resp. 2–10. Although the independent claims each recite “a handle,” the claims do not explicitly tie this limitation to the “hand carriable” language in the preambles. In any case, to the extent the handle recited in the claims may be used for carrying the claimed apparatus, the claims need not rely on the preamble term “hand carriable” for antecedent basis, as the handle limitation is introduced in the body of the claims. In other words, with respect to the functionality of carrying the apparatus by hand, the claim bodies recite “a structurally complete invention.” Catalina Marketing, 289 F.3d at 808.” slip op. at 14
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Reference is prior artInstituted
“reasonable likelihood that it would prevail in challenging the patentability of independent claim 1. In our view, Petitioner’s analysis, on this record, adequately identifies where all the elements of claim 1 are found in Liddell.” slip op. at 28
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“On the current record, we find that the Petition provides sufficient rationale to modify Simpson in view of Liddell. See Pet. 57–61 (citing Ex. 1002 ¶¶ 250–267). For example, Petitioner contends that one of ordinary skill in the art would have been motivated to incorporate Liddell’s cyclonic separating apparatus into Simpson’s vacuum cleaner in order to reap “the benefits of cyclonic separation, including maintaining steady suction as the separator fills with dirt.” Id. at 59 (citing Ex. 1002 ¶¶ 256– 259). Petitioner explains that Organ establishes that “bagless vacuums like ‘cyclonic’ vacuums were ‘becoming increasingly popular’” in the prior art because they are able “to maintain a consistently high level of suction, even as the collecting chamber fills with dirt” (id. (citing Ex. 1006, 1:8–13)), and relying on the declaration testimony of Dr. Giachetti, argues that one of ordinary skill in the art would have “would have been motivated to substitute Simpson’s dust separation system with a bagless cyclonic separator for the same reason” (id. (citing Ex. 1002 ¶ 281)).” slip op. at 38
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,327,607
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.