- PTAB · Oct 6, 2026 · IPR2025-00530 · APJ Scott C Moore · IPR · Final written decision
Original claims 1–9 were canceled; the non-contingent motion to add substitute claims 10–18 was denied for lack of written-description support, and claim 18 was also indefinite.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“that either the ’303 application or the ’838 provisional contain adequate written description support for the disputed feature of limitation [10.d]. Though the disclosures cited by Patent Owner indicate that a secondary identifier can be used to aid in verification of a UAV, these disclosures also make clear that both first and second identifiers are transmitted by and received from the UAV. See, e.g., Ex. 2002, 4:15–17, 30:24–31:6; Ex. 2003 ¶¶ 14, 66. Patent Owner’s reliance on disclosure characterized as transmitting an identifier from a remote computing system “through the UAV” (Reply 2) is not persuasive. The cited disclosures from the ’303 application and ’838 provisional generally disclose that the identifiers transmitted by a UAV can be “generated remotely,” such as by a “remote computing system.” Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45. But Patent Owner has not identified disclosure indicating that a remote computing system may transmit an identifier to the identification receiver. In the ’303 application and ’838 provisional, only the UAV (which is part of the discrimination system, and thus not “remote”) actually transmits identifiers to the identification receiver. Patent Owner is correct in its assertion that an “aerial system identifier can be generated on-board the aerial system” or “generated remotely . . . at a remote computing system.” Mot. 7 (citing Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45). But even if a UAV’s identifier was at some time in the past generated by a remote computing system, the subsequent transmission of that identifier from the UAV to the identification receiver would not satisfy the plain language of limitation [10.d]. The claim language “receive … a second identifier from a computing system that is remote to the discrimination system” requires the receipt of a transmission of the second identifier from a remote computing system. This claim language limits the source of the received transmission (i.e., where the particular transmission is “receive[d] … from”). Thus, the relevant issue is from where was the recited second identifier received. The relevant is not where the second identifier was originally generated.” slip op. at 12
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“We determine that the disputed language in limitation [10.d] is not indefinite. There is no recitation in proposed substitute claim 10 that the second identifier is transmitted solely from the identifier transmission system. Thus, the alleged irreconcilable contradiction cited by Petitioner is not recited in the claims. Petitioner’s position appears to rest on the fact that the ’303 application and ’838 provisional do not disclose receiving the second identifier from a remote computing system. See Sur-reply 6 (“To manufacture written description support, [Patent Owner] argues the claim encompasses identifiers routed ‘through the UAV.’”). Though we agree that limitation [10.d] lacks adequate written description support, this defect does not render the claim indefinite because the scope of limitation [10.d] is otherwise reasonably certain based on its plain language. See supra § III.C.4.” slip op. at 18
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date, deniedDecided for patent owner
“In contrast, the ’393 provisional never discloses that the described drone defense system may use the identity of a detected drone to develop a particular countermeasure. The disclosed RTSS certainly uses identity information to determine whether a drone is a threat. And if a threat is identified, the RTSS immediately starts “a series of processes … to determine what rule of engagement will be applied on the intruding drone.” Ex. 1006 ¶ 10. The ’393 provisional discloses that the system may select a particular countermeasure based on (i) the particular zone within a protected area within which a drone is located, (ii) “the behavior of the hostile drone,” or (iii) “other instructions.” Id. ¶¶ 9, 10. But the ’393 provisional never discloses that these “other instructions” may include the identity of the drone. The system disclosed in the ’393 provisional uses the identity of a drone to determine whether to activate the countermeasure system. See id. ¶¶ 16–18. But there is no disclosure in the ’393 provisional that the countermeasure system, once activated, uses the identity of the drone to develop the particular countermeasure to be employed. See generally Ex. 1006. Thus, though the Whitmarsh reference itself contains ample written description support for limitation [19e], the earlier-filed ’393 provisional does not. On this record, and having reviewed the ’393 provisional in its entirety, we determine that the ’393 provisional does not “reasonably convey[] to those skilled in the art that the inventor had possession of” the subject matter of limitation [19e] of Whitmarsh’s claim 19 “as of the filing date” of the ’393 provisional. See Ariad, 598 F.3d at 1351.” slip op. at 27
§ 102 anticipation§ 112 disclosurecites NautilusPatents in suitUS 10,249,199 - PTAB · Mar 25, 2026 · IPR2024-01380 · APJ Arthur M Peslak · IPR · Final written decision
The Board cancelled original claims 1–10 and granted substitute claims 11–19 because Petitioner did not prove claim 11 obvious over Torrence and Piepho.
RulingsFinal written decision- 112 supportGranted
“relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc) (citing Vas-Cath Inc. v. Mahurkar, 935 F.2d 1555, 1562–63 (Fed. Cir. 1991)). “[T]he hallmark of written description is disclosure.” Id. “[T]he test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art. Based on that inquiry, the specification must describe an invention understandable to that skilled artisan and show that the inventor actually invented the invention claimed.” Id. “In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.” Yingbin-Nature (Guangdong) Wood Ind. Co., Ltd. v/ Int’l Trade Com’n, 535 F.3d 1322, 1334 (Fed. Cir. 2008). “[T]he level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Ariad, 598 F.3d at 1351 (citing Capon v. Eshhar, 418 F.3d 1349, 1357–58 (Fed. Cir. 2005)). “This inquiry . . . is a question of fact.” Id. (citing Ralston Purina Co. v. Far-Mar-Co, Inc., 772 F.2d 1570, 1575 (Fed. Cir. 1985)). Further, inventions in the mechanical and electrical-based arts usually involve predictable factors and can be more predictable than other fields, such as chemistry and biology. See In re Fisher, 427 F.2d 833, 839 (CCPA 1970);” slip op. at 13
- Skill levelSkill level petitioner adoptedDecided for petitioner
“C. Level of Ordinary Skill in the Art The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)).” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“D. Claim Construction We determine that no express construction of any claim term is necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“[c]ombin[e] the tapered region of Piepho with the shaft of Torrence, the tapered region would extend from an uppermost extremity of the shaft.” RMTA Opp. 9. But, Petitioner concedes that neither reference discloses a tapered region extending from the uppermost extremity. Petitioner argues that Torrence’s shaft is straight (Amended RMTA Sur-reply 9) and that “[t]he tapered region of Piepho does not extend to the extreme end of the shaft.” RMTA Opp. 11 (emphasis added). Because neither Torrence nor Piepho discloses a shaft with a tapered region that “extends from an uppermost extremity of the shaft,” we find that the combination of Torrence and Piepho does not teach limitation 11[a]. We now analyze whether Petitioner provides reasoning with a rational underpinning why a person of ordinary skill in the art would have been motivated to modify Torrence with Piepho to extend Torrence’s taper from the upper extremity of its shaft. slip op. at 22
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,827,568 - PTAB · Sep 10, 2025 · IPR2025-00141 · APJ Ken B Barrett · IPR · Remand
The Board instituted IPR of claims 1–21 on all asserted grounds after finding a reasonable likelihood of prevailing on the Nishida-based challenges.
RulingsRemand decision- Director reviewDirector review, grantedGranted
“partes review of U.S. Patent No. 8,266,749 B2 (“the ’749 patent,” Ex. 1001). Paper 1 (“Pet.”). The Petition challenges the patentability of claims 1–21 of the ’749 patent. Nike, Inc. (“Patent Owner”)2 filed a Preliminary Response to the Petition. Paper 6 (“Prelim. Resp.”). With our authorization, Petitioner filed a Reply to Patent Owner’s Preliminary Response (Paper 10) and Patent Owner filed a Sur-reply (Paper 13). We discretionarily denied institution under 35 U.S.C. § 325(d). Paper 20. Petitioner filed a request for Director Review of the Decision denying institution. Paper 21. Director Review was granted, the Decision denying institution of inter partes review was vacated, and the case was remanded to the Board. Id. at 4. Specifically, the case was “remanded to the Board with instructions to consider Petitioner’s Nishida grounds and to determine whether the Petition should be instituted.” Id. at 3–4.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“presented in the Petition and the Preliminary Response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’749” slip op. at 2
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“In support of Petitioner’s position, Dr. Adanur testifies that “Nishida discloses that the unfinished surface area 1.1 is part of the web 1 itself,” that Nishida discloses that the computer-controlled process can (using Nishida’s phrase) “put in” up to seven different textile fibers or yarns into the web of material in one operation, and that, “[t]hus, Nishida discloses simultaneously knitting its layouts 2 and tongue 40 (each a ‘textile element’) with the unfinished surface area 1.1 (a ‘surrounding textile structure’).” Ex. 1002 ¶ 216 (citing Ex. 1022, 2:12–20, 4:47–55, 5:45–49). For purposes of institution, we credit that testimony over the testimony of Dr. Pastore, because, on the current record, we regard Dr. Adanur’s testimony as more consistent with the evidence. This and the other related issues may be explored more fully during the trial.” slip op. at 23
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that: A person of ordinary skill in the art (“POSITA”) in the field of the ’749 patent in March 2004 would have been someone with at least a few years of experience in knit materials and knitting methods and machines that can be used in making footwear, or a bachelor’s degree in textile-related sciences, engineering, or industrial product design, or equivalent academic or work experience, including in the footwear industry. EX1002, ¶68. Such a person of ordinary skill would have at least a general understanding of general construction processes and materials used in the manufacturing process of fabric-based articles. For individuals with a lower educational level, a person could still be of ordinary skill in the art provided that person’s working experience compensates for any such lower educational level, or vice versa. See id. Pet. 23–24. Patent Owner states that, “[f]or purposes of this Preliminary Response, Nike applies Skechers’ definition for a person of ordinary skill in the art.” Prelim. Resp. 14. Petitioner’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Petitioner’s definition of the person of ordinary skill in the art.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,266,749 - PTAB · Sep 11, 2024 · IPR2023-00763 · APJ Kristen L Droesch · IPR · Remand
Instituted review of claims 7 and 11 on the § 103 ground over Park and IEEE 802.16-2004.
RulingsRemand decision- Director reviewDirector review, grantedGranted
“considering the factors set forth in General Plastic Industrial Co. v. Canon Kabushiki Kaisha, IPR2016-01357, Paper 19 (PTAB Sept. 6, 2017) (precedential only as to Section II.B.4.i) (“General Plastic”), and expanded upon in Valve Corp. v. Electronic Scripting Products, Inc., IPR2019-00062, Paper 11 (PTAB Apr. 2, 2019) (precedential) (“Valve”). Paper 17 (“Decision”). Petitioner requested Director Review of the Decision, which was granted. Papers 18, 19. On March 22, 2024, the Director issued a Decision Vacating the Decision as an improper extension of the “significant relationship,” as set forth in General Plastic and Valve, and remanding to the Board to issue a decision on institution that addresses the merits of the Petition. Paper 28 (“Director’s Decision”).” slip op. at 2
- RemandOther
“considering the factors set forth in General Plastic Industrial Co. v. Canon Kabushiki Kaisha, IPR2016-01357, Paper 19 (PTAB Sept. 6, 2017) (precedential only as to Section II.B.4.i) (“General Plastic”), and expanded upon in Valve Corp. v. Electronic Scripting Products, Inc., IPR2019-00062, Paper 11 (PTAB Apr. 2, 2019) (precedential) (“Valve”). Paper 17 (“Decision”). Petitioner requested Director Review of the Decision, which was granted. Papers 18, 19. On March 22, 2024, the Director issued a Decision Vacating the Decision as an improper extension of the “significant relationship,” as set forth in General Plastic and Valve, and remanding to the Board to issue a decision on institution that addresses the merits of the Petition. Paper 28 (“Director’s Decision”).” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2020). We may not institute an inter partes review “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s proposal is consistent with the level of skill reflected in the prior art references of record. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007) (listing the type of problems encountered in the art, prior art solutions to those problems, and the sophistication of the technology as factors that may be considered in determining the level of ordinary skill in the art). See also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”). Accordingly, for purposes of this decision, we adopt Petitioner’s definition of the person of ordinary skill in the art.” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,447,450 - PTAB · Dec 13, 2021 · IPR2020-01062 · APJ Ken B Barrett · IPR · Final written decision
The Board granted cancellation of claims 1–15, 19–20, and 22–24; allowed substitute claims 26–29, 31–38, and 40–44; and denied substitute claims 30 and 39 for lack of written-description support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Ex. 1003 ¶¶ 78–79; see Pet. 10. In the Institution Decision, we adopted Mr. Fischer’s definition for purposes of that decision. Institution Decision (Paper 7) 9–10. Patent Owner states that it “accepts that definition for the purposes of this proceeding.” Rev’d MTA 24. Mr. Fischer’s definition is consistent with the level of ordinary skill reflected in the prior art references of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (recognizing that the prior art itself may reflect an appropriate level of skill in the art). For purposes of this decision, we apply Mr. Fischer’s definition of the person of ordinary skill in the art.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner proposes constructions for “code” and “Electronic Product Code (EPC).” Opp. to Rev’d MTA 6. Patent Owner asserts that “the limitations of the substitute claims do not require construction and should, instead, be construed in accordance with their ordinary meaning.” Rev’d MTA 24. According to Patent Owner, the addition of certain features of the proposed substitute claims renders moot Petitioner’s arguments concerning the meaning of the term “code.” Id. Additionally, Petitioner argues that the content of the recited codes— an EPC and a code different from the EPC—constitutes “printed matter” (non-functional descriptive material) and, therefore, are not entitled to patentable weight. Opp. to Rev’d MTA 7–10; Pet. Sur-reply 5–6. We need not reach this issue. Even if we construed the specifically recited codes as being non-functional descriptive material, Petitioner, for reasons discussed below, has not shown that the claimed subject matter is unpatentable. Also, the parties do not identify any other issue in this case that turns on whether the two recited codes are non-functional descriptive material. See, e.g., Opp. to Rev’d MTA 11–12 (Petitioner arguing that the relied-on prior art discloses codes in the form of an EPC and a TID (i.e. a code other than the EPC)). On this record, we determine that no claim terms require express construction.” slip op. at 14
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“A patent claim is indefinite when that claim, “viewed in light of the specification and prosecution history, [does not] inform those skilled in the art about the scope of the invention with reasonable certainty.” Nautilus, Inc. v. BioSig Instruments, Inc., 572 U.S. 898, 910 (2014).” slip op. at 12
- ScopeDecided for patent owner
“Motion to Amend, that “[c]onstruing ‘a first and second memory bank’ to mean, for example, two memories instead of ‘a memory’ also impermissibly broadens the claims.” Opp. to Rev’d MTA 4 n.1 (citing Ex. 1032 ¶¶ 3024– 3027); see also Pet. Sur-reply 1–2 (“the scope of the proposed claims is impermissibly broadened to encompass logical memory banks storing codes in more than one memory.”); Tr. 7:12–13 (“That’s improper because it enlarges the scope of claims to include two memories instead of just one.”). Petitioner’s argument appears to assume that the proposed substitute claims require two memories (as opposed to the recited “memory bank[s]”) and that, because two memories are quantitatively more than one memory, the claims have been broadened. We disagree with Petitioner’s arguments. The arguments are contingent upon a construction of two memory banks being the same scope as two memories. See Opp. to Rev’d MTA 4 n.1 (“Construing . . . impermissibly broadens the claims.”). Petitioner has not offered any persuasive argument or evidence that the two different terms—“memory” and “memory bank” are coextensive or that the more general term “memory” can encompass two of the more specific “memory bank[s].” Further, even if the proposed substitute claims required two memories rather than two memory banks, adding the requirement of a second memory (or, as written in the proposed claims, two memory banks rather than “a memory” as in the issued claim) is further limiting the claims and, therefore, is not broadening the scope. See Hockerson-Halberstadt, Inc., 183 F.3d at 1374. We agree with Patent Owner that the amended language regarding two memory banks does not impermissibly broaden the scope relative to the original claims.” slip op. at 18
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 8,134,451 - PTAB · Oct 15, 2020 · IPR2019-00995 · APJ Timothy J Goodson · IPR · Final written decision
The Board granted the non-contingent motion to amend, canceling claims 2, 8, 10, 18, 19, 28–30, 32–34, 37, 38, 40–42, 45, and 47 and substituting claims 48–62, which were not shown obvious.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“minimal probative value because Patent Owner has not adequately demonstrated a nexus between the asserted objective indicia and the merits of the claimed invention. Mot. to Exclude 3–4; Reply Mot. to Exclude 1–2. This argument attacks the merits of Patent Owner’s substantive arguments on objective indicia and does not establish an evidentiary basis for excluding Mr. Van Vliet’s testimony. We agree with Patent Owner that Mr. Van Vliet’s testimony is relevant to the issue of objective indicia of nonobviousness. See Opp. Mot. to Exclude 1–2. Petitioner also argues that Mr. Van Vliet’s declaration should be excluded because it contains hearsay. Mot. to Exclude 4–6; Reply Mot. to Exclude 2. Petitioner states that it “is not moving to exclude based on the fact that the Declaration itself [is] hearsay, but rather that it contains a multitude of statements therein that are themselves hearsay, made by persons other than Van Vliet . . . .” Mot. to Exclude 5. However, as Patent Owner points out, Petitioner does not identify any specific statements in the declaration that constitute hearsay. Opp. Mot. to Exclude 4. Even after Patent Owner pointed out this lack of specificity, Petitioner’s Reply still does not clarify which specific statements in the declaration are alleged to be hearsay and instead simply repeats the assertion there are “a multitude of statements therein that are themselves hearsay.” Reply Mot. to Exclude 2.” slip op. at 11
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“however, we first consider whether Patent Owner’s Revised Motion to Amend meets the statutory and regulatory requirements of 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. To satisfy those requirements, Patent Owner must demonstrate that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter; and (4) the proposed claims are supported in the original disclosure (and any earlier filed disclosure for which the benefit of filing date is sought). See 35 U.S.C. § 316(d) (2018); 37 C.F.R. § 42.121 (2018).” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“We determine that the plain language of the claim, which requires that the fuel delivery connections “compris[e]” the fuel level sensor, shows that the fuel level sensor is structurally connected to the fuel level sensor. As Petitioner agrees, this claim language requires that the fuel delivery connection includes the fuel level sensor. Tr. 34:17–20. Both the fuel delivery connections and the fuel level sensor are structures, so for one to include the other, they must be physically connected. Petitioner’s argument give effect to the word “comprising.” Because a fuel delivery connection and a fuel level sensor would be operationally connected in any system that has both items, Petitioner’s interpretation essentially reads out the word “comprising” and treats the claim phrase as if it recited “fuel delivery connections and a fuel level sensor.” Our interpretation that the fuel delivery connections must be physically connected to the fuel level sensor is more faithful to the claim’s recitation that the fuel delivery connections “compris[e]” the fuel level sensor. See Stumbo v. Eastman Outdoors, Inc., 508 F.3d 1358, 1362 (Fed. Cir. 2007) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”) (quoting Merck & Co. v. Teva Pharms. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005)).” slip op. at 22
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“a low and high fuel level in the tanks to which the fuel delivery connection is connected.” RMTA A1. Patent Owner proposes that “low” fuel level means “empty or nearly empty” and “high” means “full or nearly full.” Id. at 5 nn.16–17 (citing Ex. 1001, 4:1–4, 6:7–12; Ex. 2002, 10). Petitioner does not contest Patent Owner’s proposed constructions or offer competing constructions for these terms. See generally Opp. RMTA; Tr. 13:17–15:14. Although Patent Owner’s argument in support of these constructions is truncated, we determine that Patent Owner’s proposals are supported by the evidence of record. The ’906 patent describes that operators can be provided with “visual representations or displays showing the fuel level in each of the tanks 12. Any visual representation or display may be used that shows at least a high level condition (tank full) and a low level condition (tank empty or nearly empty) and preferably also shows actual fuel level.” Ex. 1001, 3:66–4:4; see also id. at 6:7–10 (explaining that “[t]he control station 56 may be provided with a full readout or display for each fuel tank 12 being filled that shows the level of fuel in the fuel tank 12 including when the fuel tank 12 is near empty and near full. An alternative is to provide only fuel empty (low sensor dry) or fuel full (high sensor wet) signals.”). These descriptions equate a high fuel level with the tank being full or nearly full and a low fuel level with the tank being empty or nearly empty. Patent” slip op. at 24
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,029,906 - PTAB · Sep 21, 2020 · IPR2019-00846 · APJ Jennifer Meyer Chagnon · IPR · Final written decision
Claims 3 and 4 are cancelled, and substitute claims 12 and 13 are added; Petitioner did not prove the substitute claims obvious over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Dr. Ducharme testifies that a person of ordinary skill in the art “would have had at least an undergraduate degree in mechanical engineering, or equivalent education, training, or experience, with at least two years of experience with [Unmanned Aeriel Vehicles (UAV)].” Ex. 1003 ¶ 72. Dr. Reinholtz testifies that a person of ordinary skill in the art “would have had a bachelor’s degree in mechanical engineering and at least two years of experience designing mechanisms and mechanical structures of the type used in releasable couplings and locking devices. Additional education could substitute for professional experience and significant work experience could substitute for formal education.” Ex. 2001 ¶ 28. Dr. Reinholtz acknowledges that he does not view “Dr. Ducharme’s proposed definition as substantially different from [his own].” Ex. 2001 ¶ 30. We agree and note that our consideration of the issues presented does not turn on which proposed definition is applied. Dr. Ducharme and Dr. Reinholtz also acknowledge that their respective testimony would remain the same regardless of which of these definitions of a person of ordinary skill in the art is applied. See Ex. 1028 ¶ 23; Ex. 2001 ¶ 30. In any event, for purposes of this Final Written Decision, we adopt Petitioner’s description of a person of ordinary skill in the art, while maintaining our prior determination (Inst. Dec. 10) that the prior art reflects the appropriate level of skill at the time of the claimed invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“1. “lugs” and “notches” Claim 1 recites, inter alia, “the shaft lock portion defining notches configured to engage corresponding lugs on the blade lock portion.” Ex. 1001, 6:7–9 (emphasis Petitioner’s (Pet. 23)). In the Institution Decision, we construed “lugs” and “notches,” in accordance with Petitioner’s proposal, as “projections” and “indentations,” respectively. See Inst. Dec. 12; Pet. 24; Ex. 1003 ¶ 86. The parties do not dispute this construction in their subsequent briefing, and we discern no reason to change this construction based on the complete record of this proceeding. Therefore, we maintain our prior construction for purposes of this Final Written Decision.” slip op. at 15
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“claims.” 35 U.S.C. § 316(d)(1)(B); see 37 C.F.R. § 42.121(a)(3) (“A motion to amend may cancel a challenged claim or propose a reasonable number of substitute claims.”). Patent Owner proposes two substitute claims in place of two challenged claims. Revised Mot. Amend 1, 27. “There is a rebuttable presumption that a reasonable number of substitute claims per challenged claim is one (1) substitute claim.” Lectrosonics, Paper 15 at 4; see 37 C.F.R. § 42.121(a)(3). Petitioner does not argue otherwise. See generally Opp. Therefore, we determine that the amendments propose a reasonable number of substitute claims.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable
“screwed onto the wrong driveshaft, when using a conventional threaded attachment mechanism (such as that described in Sasaki) is actually “mistake-proof.” Based on the evidence of record, we determine that it is not. Or, in other words, we determine that the conventional threaded attachment mechanism taught by Sasaki does not teach the Engagement Limitation (i.e., it does not prevent the clockwise lock mechanism from “be[ing] engaged in” the counterclockwise lock mechanism). According to Patent Owner, “the conventional screw-on type blade attachment mechanism does not prevent the attachment of a blade to the wrong drive.” Revised Mot. Amend 15 (citing Ex. 2001 ¶¶ 52–54, 59). Patent Owner contends that “it is relatively easy to attach a blade on the wrong drive on a UAV that utilizes the conventional screw-on type connection mechanism.” Id. (citing Ex. 2001 ¶¶ 52–54); see also Ex. 2006 (video created by Dr. Reinholtz demonstrating that a blade can be attached to the wrong drive using a screw-on type attachment mechanism). In its Reply, Patent Owner argues, again relying on the testimony of Dr. Reinholtz, that “[w]ith a conventional threaded attachment mechanism, when a blade is screwed onto the wrong driveshaft, the blade becomes engaged in the lock mechanism.” Reply 2 (citing Ex. 2016 ¶¶ 20–24). Petitioner, on the other hand, relying on the testimony of Dr. Ducharme, contends that “[w]hen a blade is forced onto the driveshaft and the threads are ‘stripped’, the blade is not, and cannot be, ‘engaged’ with the lock mechanism”; “[r]ather, the metal threads on the shaft lock portion are likely carving out new notches in the blade lock portion.” Opp. 12 (citing Ex. 1028 ¶ 49). According to Patent Owner, however, the “[i]ntent of the UAV designer is not a part of the Engagement Limitation.” Reply 2; see id. (noting that “Petitioner’s position appears to be premised on the incorrect notion that the Engagement Limitation requires the engagement of lock mechanism components in the precise way that is intended by the designer of the UAV”). Patent Owner contends that to “be engaged in,” as properly construed, “include[s] the type of connection between threads when a blade is screwed onto the wrong driveshaft.” Id. at 3. As we have construed it, to “be engaged in” merely requires “being interlocked.” See supra Section II.C.2. Relying on testimony of Dr. Reinholtz, Patent Owner further contends that “when a blade is screwed onto the wrong driveshaft, the threads on the blade mate or interlock with the threads on the driveshaft.” Reply 3 (citing Ex. 2016 ¶¶ 20, 23–24); see also Tr. 31:8–12 (“[A]s Dr. Reinholtz explains [at Ex. 2016 ¶ 23], that when a blade is misthreaded, a mechanical connection is created by engagement between the threads either because threads on the blade are deformed around threads on the shaft or threads on the shaft carved through threads on the blade.”). As shown in Dr. Reinholtz’s video, when the blades are screwed onto the wrong driveshaft, the blade and shaft are locked together (i.e., “interlocked” or “engaged”). Ex. 2006; see also Ex. 2001 ¶ 54 (describing the video, and indicating that the incorrectly installed blades “do not fall off” and are “securely attached”).” slip op. at 32
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,260,184 - PTAB · Jun 28, 2018 · IPR2017-00414 · APJ James T Moore · IPR · Final written decision
Claims 1–7 were not shown unpatentable under § 103 over either Cohen and Martin or Holmes and Martin because the combinations did not establish the claimed separate shaping before mixing.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“As used herein, the term “hearing aid profile” refers to a collection of acoustic configuration settings for hearing aid 102, which are used by a processor 110 to shape electrical signals related to sounds to compensate for the user's hearing loss. Ex. 1001, 3:11–15. Petitioner states that Patent Owner defined this term in the ’538 patent as “a collection of acoustic configuration settings for hearing aid 102, which are used by processor 110 to shape electrical signals related to sounds to compensate for the user’s hearing loss.” Pet. 15. According to Petitioner, this construction is consistent with the plain and ordinary meaning of the term, relying upon the testimony of its witness Dr. Les Atlas. Pet. 15 (citing Ex. 1003 ¶ 38).10 Patent Owner does not dispute Petitioner’s proposed construction. Resp. 10–11. 10 Dr. Les Atlas is the Petitioner’s witness in this matter. We find him qualified to testify as to the subject matter of this proceeding, by virtue of his education and experience. See Ex. 1003 ¶ 4, and Appendix A thereto. We are cognizant of Patent Owner’s suggestion that we give his testimony “little, if any, weight” because of the similarity of the testimony with Petitioner’s arguments and discrepancies between it and his deposition testimony. Resp. 31–34. We give Dr. Atlas’ testimony appropriate contextual weight herein based upon the content of the testimony itself, and any contrary testimony in Exhibit 2005. We decline to assign generally no weight to his testimony, however. supports, and is consistent with, Petitioner’s proposal. Ex. 1001, 3:12–16. Accordingly, we determine that the broadest reasonable construction, in light of the specification of the ’538 patent, of the term “hearing aid profile” is a “collection of acoustic configuration settings for hearing aid, which are used by a processor to shape electrical signals related to sounds to compensate for a user’s hearing loss.”” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“For the purposes of our decision, we determine that no other claim terms need explicit construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (citation omitted).” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“11 Petitioner defines the level of ordinary skill in the art as someone with a Bachelor’s degree in electrical engineering and at least two years of experience in the field of audio engineering. Pet. 14 (citing Ex. 1003 ¶ 25). Patent Owner does not challenge Petitioner’s definition. Resp. passim. The references in the record support a finding that this is the appropriate level. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of skill in the art). 12 The record contains no allegations or evidence of secondary considerations.” slip op. at 10
- Expert testimonyPetitioner expert discountedPatent owner expert creditedMixed
“We find the testimony of Dr. Atlas on the key point of obviousness of pre-mixing processing to be less persuasive than that of Mr. Brown. We also find Dr. Atlas’ testimony falls short of adequately explaining how the combination of Cohen and Martin teaches a nexus (i.e., the “based on both the first [shaped] output signal and the second [shaped] output signal” (emphasis added) (hereinafter, “based on both limitation”) limitation recited in claim 1) between the claim 1 requirements of: (1) a condition precedent of shaping both a first output signal and a second output signal; and (2) a subsequent result of using both the first shaped output signal and the second shaped output signal if the hearing aid is in a third mode. Dr. Atlas assumes that one of ordinary skill in the art would process separately each signal and then mix them. Ex. 1003 ¶ 66. We find Dr. Atlas’ assumption is flawed. Specifically, in making this assumption, Dr. Atlas does not address adequately how the combination of Cohen and Martin opines “it would have been obvious to a person of ordinary skill in the art” (emphasis added), his later sentences appears to base his opinion principally on the reason one of ordinary skill in the art could do it. Id. In particular, he testifies: Because Cohen’s hearing aid applies different hearing aid profiles to different input sources, it would have been obvious to a person of ordinary skill in the relevant art to add the functionality of the combination mode as taught by Martin to Cohen’s hearing aid such that the speaker would produce an audible sound based on the output signals of the processor. Combining two signals such that both signals are sent to a speaker to an audible combination of sounds, that is where each signal is sufficiently perceived, was well within the technical ability of a person of ordinary skill in the art. To accomplish this would require that each one of the two signals is passed through an appropriate hearing aid profile. For example, it would have been obvious to a person of ordinary skill in the art that a different hearing aid profiles could be used for an audio coil inputs and that of a neighboring conversation and environmental sounds through a microphone. Namely, it is commonly known that the different frequency sensitivity of an audio telecoil versus a microphone can be beneficially compensated for. (Rodriquez, Ex. 1011, Abstract)” slip op. at 24
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,649,538 - PTAB · Dec 19, 2017 · IPR2016-01107 · IPR · Final written decision
Claim 21 was not shown unpatentable under § 103 over Neilson, Kelly, and Miller because the references did not teach the nozzle limitations without hindsight, and secondary considerations weighed against obviousness.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededDecided for patent owner
“Based on the record before us, we determine that the phrase, “a nozzle oriented towards the splash shield,” means “a nozzle pre-positioned such that it points at the splash shield,” and the phrase, “directing rinsing fluid onto the splash shield using the nozzle,” means “spraying rinsing fluid onto the splash shield from the pre-positioned nozzle.” Our claim constructions are supported by the claim language for at least two reasons: First, the phrase, “a nozzle oriented towards the splash shield,” describes a component of a mixing machine. Claim 21 recites: “providing a mixing machine having . . . a nozzle oriented towards the splash shield.” Ex. 1001, 7:1–5. This limitation describes the structure of a mixing machine that is used to perform the claimed method. As Petitioner explains, “[c]laim 21 is a method claim that separately recites attributes of the provided mixing machine and a step of directing rinsing fluid.” Pet. Reply 4. “Oriented” describes the position of the nozzle in the machine. The nozzle is oriented before it is used to direct rinsing fluid onto the splash shield. In other words, the nozzle is pre-positioned. Second, the claim drafter used the term, “positionable,” rather than” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“3. Level of Ordinary Skill in the Art We accept Dr. Slocum’s definition of a person having ordinary skill in the art (“PHOSITA”) as an engineer with at least an undergraduate degree in mechanical engineering or related discipline and at least three years of professional or research experience in the design of consumer or medical products that utilize fluid systems. Ex. 1010 ¶ 20. Dr. Maynes states that he does not necessarily agree with Dr. Slocum’s definition, but does not provide and alternative definition or no persuasive reasoning as to why Dr, Slocum’s definition is incorrect. Ex. 2023 ¶ 6. We also rely on Petitioner’s references as reflecting the level of ordinary skill in the art at the time of the invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentable
“limited to automatic rinsing, Miller discloses an electronically controlled nozzle 129. Pet. Reply 12. Petitioner argues that it would have been a simple substitution to modify Kelly’s spray device 56 with Miller’s electronically controlled nozzle 129 and that the teachings of Kelly and Miller would have led a skilled artisan to orient Miller’s electronically controlled nozzle 129 toward Neilson’s lid 16 and direct rinsing fluid thereon. Id. at 12–13 (citing Ex. 1010 ¶¶ 69, 82–85; Ex. 2027, 169–72). We are not persuaded by Petitioner’s argument for two reasons. First, Petitioner’s reply argument relies on impermissible hindsight. The combination of Neilson, Kelly, and Miller does not teach or suggest the nozzle limitations of claim 21 without relying on the claim as a roadmap for selecting and modifying the teachings. Miller teaches nozzle 129 for spraying cleaning fluid onto a blender spindle after each use. Ex. 1004 ¶ 55, Figs. 17, 18. Miller also discloses a splash shield in the form of a tubular sleeve inserted into a mixing container during blending. Id. ¶ 42; Ex. 1005, 4:1–4, 4:33–36. Like Neilson’s lid 16, Miller’s splash shield is manually removed for cleaning. Ex. 1003, 5:65–66; Ex. 1004 ¶ 45; Ex. 1005, 5:4–10. Although Miller’s nozzle 129 is pre-positioned, it is not pointed at a splash shield. See Ex. 1004 ¶ 55, Fig. 18 (showing nozzle 129 for dispensing cleaning fluid onto spindle 114). To meet the nozzle limitations of claim 21, Kelly’s nozzle would need to be modified from a manually positionable nozzle to one that is pre-positioned such that it points at a splash shield. Such a modification is not suggested by Miller, which does not teach or suggest a nozzle pointed at a splash shield and instead teaches that the splash shield is manually removed for cleaning. Ex. 1004 ¶ 45; Ex. 1005, 5:4–10. Thus, even if combined, Neilson, Kelly, and Miller do not, absent hindsight, teach or suggest a method of rinsing a splash shield in which a nozzle is pre-positioned such that it points at the splash shield and rinsing fluid is sprayed onto the splash shield from the pre-positioned nozzle.” slip op. at 20
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Dr. Slocum that is not supported by Miller, and we, thus, decline to afford it substantial weight. Pet. Reply 13 (citing Ex. 1010 ¶¶ 69, 84, 85); see also Pet. 28 (citing Ex. 1010 ¶ 77).8 In paragraph 69, Dr. Slocum testifies that, “in the case of Miller,” the angle of the nozzle is adjusted “to clean . . . the splash shield.” Ex. 1010 ¶ 69. In paragraph 85, Dr. Slocum testifies that Miller teaches “the rinsing fluid [is] used for the splash shield.” Id. ¶ 85. In paragraph 77, Dr. Slocum testifies that Miller discloses using a nozzle oriented towards a splash shield for directing rinsing fluid onto the splash shield. Id. ¶ 77. Dr. Slocum’s testimony is inconsistent with Miller, which teaches that the splash shield is manually removed for cleaning. Ex. 1004 ¶ 45; Ex. 1005, 5:4–10. In fact, on cross-examination, Dr. Slocum conceded that Miller does not disclose automatic cleaning of the sleeve (splash shield) 8 See supra note 7. and that Miller’s nozzle is not pointed at the sleeve. Ex. 2027, 189:8– 190:11. Petitioner also relies on Dr. Slocum’s testimony that a PHOSITA reading Kelly would have substituted an electronic valve for Kelly’s manual valve and would have “put a bunch of them in at a bunch of different angles,” so when the valves are actuated, the whole thing is cleaned. Ex. 2027, 169:5–172:9; see Pet. Reply 13. In our view, the cited testimony is not credibly based on the teachings of the prior art references, as opposed to the teachings of the ’662 patent. Whereas Dr. Slocum opines that it would have been obvious to clean a splash shield using electronically operated nozzles (id.), Neilson, Kelly, and Miller all teach manual cleaning of a splash shield. Ex. 1002, 4:13–20; Ex. 1003, 5:65–66; Ex. 1004 ¶ 45; Ex. 1005, 5:4–10. In view of the inconsistencies between Dr. Slocum’s testimony and the teachings of Miller, we do not give substantial weight to his opinion that the method of claim 21 would have been obvious to a PHOSITA in view of Neilson, Kelly, and Miller.” slip op. at 21
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,520,662 - PTAB · Dec 30, 2014 · IPR2013-00403 · APJ Justin T Arbes · IPR · Final written decision
The Board canceled claims 1–27 and granted substitute claims 28 and 30, but denied substitute claims 29 and 31–33 for failure to meet amendment requirements or show patentability.
RulingsFinal written decision- ScopeMotion to amend, grantedGranted
“1. No Broadening of Scope Proposed substitute claims in an inter partes review “may not enlarge the scope of the claims of the patent.” 35 U.S.C. § 316(d)(3); see 37 C.F.R. § 42.121(a)(2)(ii). In its Motion to Amend, Patent Owner proposes claim 28 as a substitute for claim 2, claim 29 as a substitute for claim 11, claim 30 as a substitute for claim 13, claim 31 as a substitute for claim 22, claim 32 as a substitute for claim 24, and claim 33 as a substitute for claim 27. Mot. 1–6. Each claim includes all of the limitations of the corresponding claim for which it is a substitute, and adds additional limitations. No limitations are removed. Petitioner in its Opposition does not dispute Patent Owner’s assertion that the proposed substitute claims do not enlarge the scope of the claims of the ’583 patent. See Mot. 8. We are persuaded that the proposed substitute claims do not enlarge the scope of the original patent claims.” slip op. at 12
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateDecided for patent owner
“2. Written Description Support Pursuant to 37 C.F.R. § 42.121(b), a motion to amend in an inter partes review must set forth “[t]he support in the original disclosure of the patent for each claim that is added or amended,” and “[t]he support in an earlier-filed disclosure for each claim for which benefit of the filing date of the earlier filed disclosure is sought.”” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Term Proposed Interpretation “sync point” “a location in a data flow having data meeting a specified criteri[on]” “fine sync point” “a location in a data flow having data meeting a specified fine criteri[on] that is less restrictive than a coarse criteri[on]” “coarse sync point” “a location in a data flow having data meeting a specified coarse criteri[on] more restrictive than a fine criteri[on]” Mot. 6–7 (citing Ex. 1001, col. 9, ll. 20–57). Petitioner in its Opposition does not argue that Patent Owner’s proposed interpretations are incorrect. We agree that Patent Owner’s proposed interpretations represent the broadest reasonable interpretation of the claims in light of the Specification of the ’583 patent. The Specification discloses fine filter 560 and coarse filter 565, where “[t]he appliance designates the locations in the data flow which meet the fine and coarse filter criteria as fine and coarse sync-points, respectively,” and the filter criteria for coarse filter 565 are “more restrictive” than the filter criteria for fine filter 560. Ex. 1001, col. 9, ll. 20–38. The Specification also describes an example where “the filter criteri[on] declares a fine sync-point when the top five bits of the hashes are all zeros and a coarse filter criteri[on] which stores or compares hashes when the top ten bits of the hashes are all zeros” (i.e., the filter criterion for the coarse filter is more restrictive). Id. at col. 9, ll. 30–34. Accordingly, we interpret “sync point,” “fine sync point,” and “coarse sync point” as set forth above.” slip op. at 14
- Prior constructionPrior construction adoptedDecided for patent owner
“Also, in the Decision on Institution, we interpreted various claim terms of the independent claims of the ’583 patent as follows: Term Interpretation “network memory” (claims 1, 12, device(s) in a network for and 23) storing information “appliance” (claims 1, 12, and 23) hardware and/or software elements applied to a particular use “instruction” (claims 1, 12, and a message or signal that 23) indicates, explicitly or implicitly, an action to perform See Dec. on Inst. 6–10. Patent Owner’s proposed substitute claims depend from the original independent claims of the ’583 patent, and the parties do not dispute these interpretations in their papers. We do not perceive any reason or evidence that now compels any deviation from these interpretations. Accordingly, for purposes of assessing the proposed substitute claims, we incorporate our previous analysis of the three terms above. See id.” slip op. at 15
Claim construction§ 103 obviousness§ 112 disclosurePatents in suitUS 8,370,583
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.