• Axon Enterprise, Inc. / Dedrone Holdings, Inc. et al. v. Airspace Defense, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00629 · APJ Scott C Moore · IPR · Final written decision

  Original claim 12 is not unpatentable; substitute claim 37 is added, while substitute claims 21–28 and 30–36 are denied as obvious.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “F.3d at 1279–80, we begin our analysis with the Specification of the ’711 Patent. The Specification indicates when a UAV (such as the recited “reference aerial vehicle”) navigates autonomously, it flies without manual control, and can, for example, track and fly to a target using information captured onboard the vehicle itself. See Ex. 1001, 3:24–28 (“[I]t may not be desirable to manually control the interceptor aerial vehicle to follow the target UAV. In some embodiments, the interceptor aerial vehicle is able to autonomously track and fly to the target UAV using machine vision based on images captured by a camera of the interceptor aerial vehicle.”). The Specification also indicates that “autonomous” means more than just “automatic flight,” and clarifies that autonomous navigation occurs when a UAV that previously received a target location from an external source subsequently turns and flies itself towards the received location. See, e.g., id. at 4:15–17 (disclosing that the detected location of a target may be provided to an interceptor “to allow it to automatically and autonomously fly toward the direction of the detected location”); 15:64–16:3 (automatic and autonomous navigation occurs when an interceptor’s navigation component and/or flight controller receive the location of a target, and adjust the interceptor “to turn and fly towards the received location . . . based on the received location”); 16:49–60 (“For example, a flight direction and/or speed of an interceptor aerial vehicle are automatically and autonomously adjusted based on a location and size of the target within the captured image. . . . This allows the flight path of the interceptor aerial vehicle to be dynamically adjusted to track and follow a moving target.”).” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “have had reason to combine Beard and Laufer in the manner proposed by Petitioner, the combination would not satisfy the Autonomous Navigation limitation required by claim 12 because Laufer’s autopilot commands are generated by and transmitted from a remote command center (i.e., Laufer’s central controller 115). PO Resp. 15–16. In its Reply, Petitioner does not dispute that Laufer’s autopilot commands are generated by Laufer’s central controller 115, which is remote from the aircraft being controlled. See Reply 13–17. Petitioner asserts, however, that the combination still satisfies the Autonomous Navigation limitation because these autopilot commands are generated without human input. See id. Based on the complete trial record, Patent Owner’s arguments are persuasive. See PO Resp. 15–16; PO Sur-reply 42, 1–6; Ex. 2025 ¶¶ 84–87. The flight of Beard’s UAV 100 under the control of Laufer’s autopilot commands does not satisfy the Autonomous Navigation limitation of claim 12, as we have construed that limitation, because Laufer’s autopilot commands are generated at a location that is remote from UAV 100 (Laufer’s central controller 115.) See, e.g., Ex. 1010 ¶ 40 (“Central controller 115 uses autopilot command module 440 to generate autopilot aircraft commands”), ¶¶ 26, 30 (clarifying that central controller 115 and the controlled interceptor aircraft are separate devices that may communicate through a “wireless connection”), Fig. 4 (depicting “aircraft control commands 475” being generated externally from the depicted “Interceptor Aircraft”); see also Ex. 2025 ¶¶ 95–95. Petitioner never disputes that, in the proposed combination, Laufer’s central controller 115 would remain external to Beard’s UAV 100. See Reply 13–17. Instead, Petitioner relies on its proposed construction of the Autonomous Navigation limitation, which would have encompassed such an arrangement. See id. Our construction of the Autonomous Navigation limitation, which did not adopt Petitioner’s claim construction position, is dispositive of Petitioner’s argument. We thus determine that Petitioner has not shown by a preponderance of the evidence that claim 12 would have been obvious over Beard and Laufer.” slip op. at 15

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “the legal requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4, 7–8. For the reasons that follow, we determine that Patent Owner has satisfied this burden. 1. Proposal of a Reasonable Number of Substitute Claims A motion to amend must “propose a reasonable number of substitute claims.” 35 U.S.C. § 316(d)(1)(B); see also 37 C.F.R. § 42.121(a)(3) (“A motion to amend may cancel a challenged claim or propose a reasonable number of substitute claims.”). “There is a rebuttable presumption that a reasonable number of substitute claims per challenged claim is one (1) substitute claim.” Lectrosonics, IPR2018-01129, Paper 15 at 4; see also 37 C.F.R. § 42.121(a)(3). Patent Owner has shown it proposes a reasonable number of substitute claims by proposing a single substitute claim for each of challenged claims 1–4, 8–11, and 13–20. MTA 1–2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 2. Amendments Respond to a Ground of Unpatentability “A motion to amend may be denied where … [t]he amendment does not respond to a ground of unpatentability involved in the trial.” 37 C.F.R. § 42.121(a)(2)(i). Patent Owner has responded to the grounds of unpatentability involved in this proceeding by amending the claims in response to the Petition’s asserted prior art. See MTA 2, 25, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 3. No Enlargement of the Scope of the Claims An amendment may not seek to enlarge the scope of the claims of the patent. 35 U.S.C. § 316(d)(3); 37 C.F.R. §§ 42.121(b)(1)–(b)(2). Patent Owner asserts that the amendments in the Motion do not enlarge the scope of the claims of the patent because each proposed substitute claim “retains all of the limitations of the corresponding challenged claim, and each proposed independent substitute claim adds further limitations.” See MTA 2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 4. No Introduction of New Matter An amendment may not introduce new matter. 35 U.S.C. § 316(d)(3);” slip op. at 22

  • 112 supportDecided for patent owner

    “Having considered the evidence and argument cited by both parties, we determine there is sufficient written description support for the disputed portions of limitations [37.e1], [37.e3,] and [37.e4]. The ’452 application discloses selecting between groups of processing schemes (e.g., algorithms) depending on a confidence level, where the groups are, for example: high cost, high robustness algorithms; medium cost, medium robustness algorithms; and low cost, low robustness algorithms. See Ex. 2019 ¶¶ 146–147. These schemes or algorithms may be neural networks. See, e.g., id. ¶ 50 (including neural network as a type of algorithm); see also id. ¶¶ 109–110); see generally MTA Opp 1 (not disputing that schemes may be neural networks). Specifically, the ’452 application describes “algorithms that process video frames of one or more video data streams,” and “produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Id. ¶ 141. The ’452 application also discloses the concept of switching between neural networks based on confidence levels. In particular, the ’452 application discloses that a “process cycles through the processing schemes to produce a detection of an object,” for example, where “if the confidence number is higher than an activation number, an action is performed to stop or change a running group (i) and select or switch to group (ii).” Id. ¶ 146. More particularly, “a processing scheme from the group of (i) High cost (low refresh rate), high robustness algorithm[s] can select a cheaper processing scheme from the group of (ii) Medium cost, medium robustness algorithms.” Id. The ’452 application additionally discloses that schemes or algorithms (e.g., neural networks) are applied to individual video frames, and that the confidence levels that determine which neural network will be applied in the future are also derived from individual video frames. For example, as discussed above, the ’452 application describes that “[t]he processing schemes produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Ex. 2019 ¶ 141 (emphases added). The ’452 application also describes selecting and applying an individual neural network, rather than only selecting and applying a group of processing schemes. For example, as highlighted above, the ’452 application describes that “a processing scheme from the” “High” group “can select a cheaper processing scheme from the” “Medium” group. Id. ¶ 146 (emphases added). In our view, these disclosures, read together, would reasonably convey to one skilled in the art that the inventor had possession of the disputed subject matter described above. See Ariad, 598 F.3d at 1351.” slip op. at 24

  Patent outcomesUS 10,514,711 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 10,514,711
• Medivis, Inc. v. Novarad Corp.Some claims unpatentable
  PTAB · Oct 1, 2026 · IPR2023-00042 · APJ Scott Raevsky · IPR · Remand

  Claims 1–6, 11, and 20 are unpatentable as obvious over Doo and Amira; claims 12–19 were not shown unpatentable because the asserted tissue properties were not shown in Amira.

  RulingsRemand decision

  • RemandOther

    “Federal Circuit. The court issued its decision in Medivis, Inc. v. Novarad Corp., No. 2024-1794, 2026 WL 587294 (Fed. Cir. Mar. 3, 2026) (“Medivis”) (Paper 40),1 affirming-in-part, reversing-in-part, and remanding our Final Written Decision (Paper 35) for further proceedings. In its opinion, the Federal Circuit reversed our “determination of no motivation to combine Doo and Amira” and remanded for further proceedings to evaluate whether claims 1–6 and 11–20 (“the Remanded Claims”) of U.S. Patent No. 11,004,271 B2 (“the ’271 patent,” Ex. 1001) are unpatentable in view of Petitioner’s obviousness challenge over Doo and Amira. Medivis, slip op. at 9–10. We have jurisdiction under 35 U.S.C. § 6(b). We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Medivis, Inc. (“Petitioner”) and Novarad Corp. (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Medivis, we hold that Petitioner has demonstrated, by a preponderance of the evidence, that claims 1–6, 11, and 20 are unpatentable; however, Petitioner has not demonstrated, by a preponderance of the evidence, that claims 12–19 are unpatentable.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We adopt Petitioner’s proposed level of skill, except that we excise part of Petitioner’s definition to produce the following modified version: 4 Throughout this decision, we eliminate the parties’ italicization of reference names from quotations without noting “emphasis omitted.” 5 Doo, WO 2015/164402 A1, published October 29, 2015 (Ex. 1008). 6 Excerpt of Amira 5 User’s Guide, title through Chapter 2 (Visual Imaging 2009) (Ex. 1005). engineering, or a related field with several years of experience in the design, development, and study of augmented reality devices and . . . familiarity with conventional medical imaging data and visualization of data for medical procedures . . . . Our edit removes the alternative of “working with a team including someone with such familiarity” because one’s role in a team may be tangential to their personal experience with medical imaging. Regardless, had we adopted Petitioner’s original definition, our decision would not have changed.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We agree with Petitioner that the term “3D slices” has no apparent connection to the phrase “direct volume rendering.” Patent Owner’s argument appears to be that DVR “requires an image of the entire anatomical volume that is neither feature-specific nor segmented, [which] would seemingly require that all inner layers be displayed.” Reply 4; see Sur-reply 6–10 (not disputing Petitioner’s characterization). But, as Petitioner notes, the specification directly undermines this by teaching “display [of] a slice of the 3D data instead of a volume of the 3D data.” See Reply 4 n.2 (quoting Ex. 1001, 5:34–35). In other words, to the extent DVR would depict an image of the entire anatomical volume, displaying 3D slices “instead of a volume of the 3D data” implies the opposite of DVR. Even if “3D slices” somehow implied DVR, Patent Owner’s position is still untenable. Claim 1 does not recite “3D slices.” Instead, claim 1 recites “3D data” and “inner layers.” Ex. 1001, 18:54–65. Patent Owner fails to clarify the relationship between “slices,” “3D data,” and “layers,” and its expert even admits that slices and layers are two different things. See PO Resp. 13; Ex. 1022, 32:7–16 (agreeing that the words “slice” and “layer” are not “synonyms”), cited in Reply 4. We also agree with Petitioner that dependent claim 3 distinguishes slices and layers by reciting “slices of the projected inner layer.” Reply 4 (quoting Ex. 1001, 19:3–10). Thus, even if 3D slices somehow implied DVR, the language of claim 1 does not support limiting the claim this way.” slip op. at 12

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “The determination of whether a document was publicly accessible “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). For instance, courts routinely rely on the Wayback Machine to determine when a reference was first made available to the public. Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021) (“District courts have taken judicial notice of the contents of webpages available through the Wayback Machine ‘as facts that can be accurately and readily determined from sources whose accuracy cannot reasonably be questioned.’”). We disagree with Patent Owner’s argument that “Medivis cannot rely on additional prior art”—Exhibits 1023 and 1024—“that was submitted after its Petition to carry its burden without leave from the Board.” Sur-reply 4. As Patent Owner did not file a motion to exclude these exhibits, we decline Patent Owner’s invitation to disregard them. We also find Petitioner’s Reply argument proper because it directly responds to Patent Owner’s contention that Petitioner did not prove the public accessibility of Amira. See Chamberlain Grp., Inc. v. One World Techs., Inc., 944 F.3d, 919, 925 on issues previously raised.”). Petitioner’s Reply argument appropriately elaborates on the Petition’s contention that Amira was publicly accessible. Patent Owner also does not dispute the substance of Petitioner’s evidence. For example, Patent Owner does not address the substance of Mr. Frank-White’s declaration. We find that this evidence, including Mr. Frank- White’s declaration testimony, persuasively supports the public availability of Amira as of the date shown in the Wayback Machine URL. See Ex. 1024.” slip op. at 22

  Patent outcomesUS 11,004,271 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 11,004,271
• Crowdstrike, Inc. v. Gosecure, Inc.Some claims unpatentable
  PTAB · Aug 12, 2026 · IPR2025-00070 · APJ Neil T Powell · IPR · Final written decision

  Claims 1, 3–7, and 9–21 are unpatentable as obvious; claims 2 and 8 were not shown unpatentable because the asserted art did not meet their construed limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “III. ANALYSIS LEVEL OF ORDINARY SKILL A. Petitioner explains the applicable level of skill in the art as follows: As of June 24, 2010, a person of ordinary skill in the art (POSITA) would be a person having a bachelor’s degree in computer science, computer engineering, or an equivalent, as well as two years of industry experience and who would have had a working knowledge of software security analysis, and dynamic malware analysis. Additional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education. Pet. 8 (Ex. 1003 ¶¶ 30–31). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See Ex. 2031 ¶¶ 15–16. We adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’872 patent and the prior art of record. See Okajima v.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We begin with the claim language in view of the Specification, which weighs heavily against Patent Owner’s position that we should rewrite “computer system” as narrowly referring to a “computing device.” PO Resp. 24. As Petitioner notes, the ’872 patent’s Specification uses “computer system” to refer to a wide range of equipment, from a component of a computing device, to a whole computing device, to a collection of computing devices. Reply 9–10 (citing Ex. 1001, 4:5–8, 11:15–18, 16:50–55). In one example, the Specification refers to “one or more other computer systems (e.g., protected network devices 136).” Ex. 1001, 18:52–53. Thus, the Specification lists “protected network devices 136” as only an example of “other computer systems,” demonstrating that “computer systems” refers to things other than protected network devices. Although Patent Owner may be correct that this passage more than a single computing device,” we find that other disclosures in the ’872 patent do. Specifically, the Specification uses the language “distributed computer system” when referring to numerous components, including “protected network devices” and an “IDS/IPS system.” Ex. 1001, 3:26–28; Reply 10. In addition to showing that a “computer system” is not limited to a single computing device, this conveys that a “computer system” according to the ’872 patent can include an IDS/IPS.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Based on our review of the complete record, we find Petitioner’s arguments and evidence to be more persuasive. Patent Owner does not dispute Petitioner’s argument and evidence that capturing detailed information like Goel’s activity sources, activity targets, and association was recognized as enhancing threat analysis. Pet. 44 (citing Ex. 1003 ¶ 79); see PO Resp. 55–59; Sur-Reply 15–17. Additionally, contrary to Patent Owner’s suggestion, we find that the Petition does not propose incorporating Goel’s kernel hooks into Capalik’s system. See Pet. 41–46. Patent Owner contends that the Petition’s reference to modifying Capalik by “adding lines of code” suggests implementing the code disclosed in Goel include kernel hooks. Id. Notwithstanding Patent Owner’s assertion otherwise, this is an unpersuasive bodily incorporation argument, as the Petition never says an ordinarily skilled artisan would have used the exact lines of code from Goel in Capalik. Rather, the Petition says that an ordinarily skilled artisan would have had sufficient skill to implement straightforward code modifications to identify activity sources, targets, and associations: a [person of ordinary skill in the art] would have understood that modifying Capalik’s system (e.g., Linux-based) to additionally monitor, identify, and store each individual activity of an attack including “activity sources, activity targets, and associations” would have required straightforward modifications to programs/code instructions, which would have been well-within the skillset of a [person of ordinary skill in the art]. Pet. 46. Patent Owner argues that Petitioner does not explain how an ordinarily skilled artisan would have modified Capalik without using kernel hooks. Sur-Reply 17. But Patent Owner does not cite any evidence to counter Dr. Jakobsson’s testimony that an ordinarily skilled artisan would have had the skill to apply Goel’s general teaching of identifying sources, targets, and associations to Capalik’s system. Ex. 1003 ¶ 182. On the whole, the evidence does not support Patent Owner’s position that the combination would have required substantially increased detection risk. Moreover, even if the combination would have somewhat increased detection risk, Petitioner persuades us that an ordinarily skilled artisan still would have had reason to combine the references teachings. Patent Owner’s allegations of increased detection risk do not negate the undisputed evidence that the combination would have provided the advantage of improved threat analysis. Pet. 44 (citing Ex. 1003 ¶¶ 175–182). Ultimately, Patent Owner’s that activity logging be undetectable.” PO Resp. 56 (emphasis added) (citing Ex. 1004 ¶ 6). This exaggerates Capalik’s disclosure. Although the cited paragraph suggests that certain systems unfortunately may be detectable by some users, it does not convey that it is a requirement for the system to be categorically undetectable. See Ex. 1004 ¶ 6.8 In sum, Petitioner persuades us by a preponderance of the evidence that it would have been obvious to modify Capalik “to identify and store unauthorized activities including the activity source, activity target, and association of each activity.” Pet. 41–46; PO Resp. 55–59; Reply 20–22; Sur-Reply 15–17.” slip op. at 47

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “arguments and evidence, we determine that Patent Owner fails to sufficiently show a nexus between any of its objective indicia evidence and the claimed invention. See Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (“The patentee bears the burden of showing that a nexus exists”). A showing of sufficient nexus is required to establish that the evidence relied upon traces its basis to a novel element in the claim, not to something in the prior art. Institut Pasteur & Universite Pierre Et Marie Curie v. Focarino, 738 F.3d 1337, 1347 (Fed. Cir. 2013). Objective evidence that results from something that is not “both claimed and novel in the claim” lacks a nexus to the merits of the invention. In re Kao, 639 F.3d 1057, 1068 (Fed. Cir. 2011) (emphasis omitted). Thus, establishing nexus involves a showing that novel elements in the claim, not prior-art elements, account for the objective evidence of nonobviousness. Id. As discussed above, Petitioner shows that Capalik teaches all limitations of claim 1. Petitioner persuades us that none of claim 1’s elements individually nor any combination thereof is novel over Capalik’s disclosure. Accordingly, claim 1 is not novel over Capalik, which disproves Patent Owner’s assertion of nexus. PO Resp. 73–76. Moreover, even if claim 1 were novel, Patent Owner otherwise fails to show nexus for its commercial success, praise, or copying assertions. Patent Owner’s evidence does not show that Petitioner’s commercial product embodies claim 1. For example, we agree with Petitioner that Patent Owner “failed to analyze any meaningful detail regarding” how the Falcon Platform allegedly meets limitation 1(d). Reply 28–29. In particular, Patent Owner has not sufficiently addressed limitation 1(d) with the following argument: “1[D] The Falcon Platform transmitted to other computer systems” slip op. at 37

  Patent outcomesUS 9,954,872 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 9,954,872
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.Some claims unpatentable
  PTAB · Nov 25, 2025 · PGR2024-00030 · APJ Linda E Horner · PGR · Final written decision

  Claims 17 and 18 are unpatentable under §112(d) for improper dependent form; claims 1–10 and 12–16 were not shown unpatentable on the asserted obviousness grounds.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “We do not credit Dr. Anthony’s testimony, which is based on the arbitrary shading in Figure 7 (see Ex. 1002 ¶ 174), that Schröder teaches or suggests limitation 1[d] because it (1) is inconsistent with Petitioner’s reasoning for limitation 1[c], and (2) it is based on an admitted misreading of the embodiment of Schröder’s Figure 5 (see Ex. 1002 ¶ 175). As to the first item, Dr. Anthony states that “a POSITA would have been motivated to place a battery in a part of the cavity that is far from a PCB holding other electrical components because that configuration allows for better thermal management.” Ex. 1002, para. 175. The problem with this statement is that Petitioner relies on Schröder’s teaching that inlay 12, i.e., the alleged PCB, could include “other electrical components,” such as a battery to support its position that Schröder suggests placing a battery between the ring halves. See, e.g., Pet. Reply 2 (pointing to Dr. Mercier’s depo testimony that inlay 12 with “other components” is inserted between ring halves); id. at 3 (relying on Schröder’s teaching about placing components in depressions on inlay 12). So, Petitioner earlier asserts for the battery limitation 1[c] that Schröder teaches or suggests putting a battery on inlay 12 inside the ring halves, but then for limitation 1[d], Dr. Anthony testifies that a POSITA would place the battery “far” away from the inlay 12 (i.e., the alleged PCB). These positions are inconsistent.” slip op. at 25

  • Skill levelSkill level board ownOther

    “at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶¶ 18–22). Petitioner also contends that a person of ordinary skill would have been “familiar with, for example, sensor system design and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 26. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’178 patent and the references cited in the Petition.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner indicates that in the related ITC proceeding involving the ’178 patent, the Administrative Law Judge (ALJ) adopted three constructions agreed-upon by the parties in that proceeding8 and also construed two disputed terms.9 Resp. 26–27 (citing Ex. 2016, 5, 6, 14). Patent Owner agrees with Petitioner, however, that no terms need to be construed to decide the issues raised in the Petition. Id. at 27. We reviewed the constructions adopted by the ITC. Ex. 2016, 5, 6, 14. 8 In the ITC proceeding, the ALJ adopted the parties’ agreed-upon constructions that: (1) the preamble of claim 1 [a finger-worn wearable ring device] is limiting; (2) [positioned/configured to fit] within a “cavity” is [positioned/configured to fit] within a “hollow space”; and (3) [the internal housing component] “coupled with” [the external housing component] is [the internal housing component] “connected with” [the external housing component]. Ex. 2016, 5. 9 In the ITC proceeding, the ALJ construed the claims such that: (1) the internal and external housing components of claims 1, 12, and 17 enclose space and do not necessarily exclude potting material; and (2) “circumferential,” as recited in claims 1, 17, and 18, does not require a closed shape. Ex. 2016, 14, 17. These constructions are not germane to the issues we need to decide to resolve this proceeding. Thus, we agree that no explicit claim construction is necessary for this decision. To the extent the parties’ arguments raise any implicit issues of claim construction, we address those issues within the context in which they are raised in our analysis below.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “The record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “Mestas’s batteries, layout, and other components . . . would have to be scaled down 5 to 10 times to be appropriately sized for a finger worn ring.” Resp. 64 (internal quotation marks omitted) (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Moreover, we do not credit Dr. Anthony’s testimony that miniaturization of the battery would have been “trivial to implement.” Ex. 1002 ¶ 242. Dr. Anthony admitted on cross-examination that it would not have been within the level of skill of a person having ordinary skill in the art to design a smaller version of Mestas’s battery, and that such a person would need to procure a battery of the appropriate size and specifications for implementation in a finger-ring from a battery manufacturer. Ex. 2021, 315:9–318:9. Yet Dr. Anthony had not ascertained, for purposes of his testimony, whether there was a battery available in 2013 that was appropriate to fit within the inlay space of the modified version of Schröder’s finger-ring that he and Petitioner allege would have been obvious to one of skill in the art at that time. Id. at 321:5–10. Further, we credit Dr. Mercier’s testimony that Dr. Anthony’s testimony fails to consider the differences in power requirements between Mestas and Schröder or to account for the constraints of such a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶¶ 159–160. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’178 patent, we also have evidence that prior art “finger ring wearables up to the ’178 patent had used ‘coin’ type batteries.” Id. at 66 (citing Ex. 2018 ¶ 161). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would look to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 161. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 61–70. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring-type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 71. Based on these findings, Petitioner has not met its burden to show by a preponderance of the evidence that a person having ordinary skill in the art would have been led to modify Schröder’s finger-ring to place a curved battery between the internal and external housing components in light of the teachings in Mestas. Thus, Petitioner has not met its burden to show by a preponderance of the evidence that dependent claim 3 of the ’178 patent is unpatentable over Schröder and Mestas.” slip op. at 38

  Patent outcomesUS 11,868,178 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,868,178
• Google LLC v. Eyesmatch Ltd.Some claims unpatentable
  PTAB · Nov 21, 2025 · IPR2025-00296 · APJ Neil T Powell · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “December 18, 2012, would have a bachelor’s degree in electrical or computer engineering, or a closely related field such as computer science, and two years of work experience with image capture and processing systems or related fields.” Pet. 7 (citing Karam Decl. ¶ 91). Petitioner adds that “[a] person with less and/or different education, but more relevant practical experience, or vice versa, may also meet this standard.” Id. According to Petitioner, [t]he prior art also evidences such level of skill.” Id. Patent Owner states that it “applies Petitioners’ proposed level of skill for purposes of this Response.” PO Resp. 9 (citing Forsyth Decl. ¶¶ 53–54). For this Decision, we adopt the formulation of the level of ordinary skill in the art proposed by Petitioner and applied by Patent Owner as consistent with the prior art before us in this proceeding.10” slip op. at 9

  • Prior constructionPrior construction adoptedDecided for patent owner

    “Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Post-institution, Patent Owner invites us to construe limitation 1[f]’s recitation of “mirror tracking mode” and limitation 1[c]’s recitation of “adaptive transformation mapping.” PO Resp. 9–14. Regarding the latter, Patent Owner explains that “[i]n the District Court Litigation, ‘adaptive transformation mapping’ was construed as ‘continuously variable transformation mapping’ and ‘transformation mapping’ was construed as a ‘selected set of image transformations.’” Id. at 14 (citing Ex. 2008, 14, 37; Ex. 2013 ¶¶ 25, 27). Patent Owner does not, however, identify any way that those claim constructions affect our analysis of the parties’ patentability disputes. We find it unnecessary in resolving the parties’ patentability disputes to construe expressly limitation 1[c]’s recitation of “adaptive transformation mapping.”” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4.” slip op. at 23

  Patent outcomesUS 8,982,110 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 8,982,110
• Lifecore Fitness, LLC D/B/A Assault Fitness v. Woodway USA, Inc.Some claims unpatentable
  PTAB · May 6, 2025 · IPR2024-00083 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1–4, 6, 7, 9–13, 15, and 16 are unpatentable as obvious over Socwell, Magid, and Sclater; claim 8 was not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

    “Prior to institution, Patent Owner argued that we should dismiss the Petition because it identifies the Petitioner as the California Corporation and not the Delaware Corporation. Paper 6, 23–24 (Preliminary Response); Paper 9, 1 (Preliminary Sur-Reply); Paper 12 (Conference Call Transcript); Paper 18 (Request for Director Review). In our Decision on Institution, we found Patent Owner’s argument, as applied to the facts of this proceeding, to be unpersuasive and corrected the caption to correctly reference Petitioner as the California Corporation, essentially replacing the “Inc.” with “LLC” in Petitioner’s name. Paper 13, 14–17; see also Paper 21 (Decision Denying Director Review).” slip op. at 3

  • BurdenOther

    “We find Dr. Giachetti’s testimony, alone, insufficient to establish by a preponderance of the evidence that a POSA, given Tollkien and Sclater, would have been motivated to look to one-way sprag-type clutches to solve the problem of unexpected forward motion of the running belt of a treadmill. Without a reference, like Magid, teaching that it was known to use a one-way clutch mechanism on a treadmill to prevent unexpected forward motion, we are persuaded by Patent Owner that Petitioner’s combination is impermissibly based in hindsight. See PO Resp. 42–47. After considering Petitioner’s evidence and analysis, and taking into account Patent Owner’s arguments and evidence, we determine that Petitioner has failed to show by a preponderance of the evidence that claim 1 is unpatentable over Tollkien and Sclater.” slip op. at 42

  • ExcludeMotion to exclude, deniedGranted in part

    “Declaration of Robert Giachetti, Ph.D. P.E) under FRE 401–402. Mot. 4 (citing FRE 401–402 in the heading). Patent Owner’s Motion, however, includes no substantive arguments directed to whether Giachetti Declaration is relevant admissible evidence or irrelevant inadmissible evidence. Mot. 4– 7. In its Reply, Patent Owner states: “While the Motion to Exclude does not expressly detail Exhibit 1036’s lack of relevance under FRE 401–402, the irrelevance is plain. Petitioner’s provision of new arguments in Reply, which is not allowed, renders such arguments irrelevant.” PO Reply to Mot., 1, n.1. Patent Owners argument is unpersuasive because it is a mere assertion without adequate explanation. The party moving to exclude evidence bears the burden of proving that it is entitled to the relief requested—namely, that the material sought to be excluded is inadmissible under the Federal Rules of Evidence. See 37 C.F.R. §§ 42.20(c), 42.62(a). Patent Owner’s mere assertion does not meet Patent Owner’s burden to show that Exhibit 1036 is irrelevant inadmissible evidence.” slip op. at 52

  • Strike new argumentNew argument consideredDecided for petitioner

    “8 Patent Owner argues that we should not consider Petitioner’s Reply and Exhibits 1036 and 1051 because the Reply and Exhibits relate to new arguments which should have been made in the Petition. PO Sur-Reply 4–5. We do not agree. Petitioner may rely upon Exhibits 1036 and 1051 to response to arguments raised in the Patent Owner’s Response. See PO Resp. (a ); Axonics, Inc. v. Medtronics, Inc., 75 F.4th 1374, 1380–1382 (Fed. Cir. 2023) (“we have continued to recognize that a petitioner is entitled under the APA to respond to new claim construction arguments made by a patent owner.”)” slip op. at 16

  Patent outcomesUS 11,465,005 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,465,005
• Simpson Strong-Tie Company Inc. v. Columbia Insurance CompanySome claims unpatentable
  PTAB · Feb 28, 2025 · PGR2023-00048 · APJ Stephen E Belisle · PGR · Final written decision

  Claims 1–37, 39–90, and 92–105 are unpatentable as obvious; claims 38 and 91 were not shown unpatentable because the cited references do not teach flanges physically contacting along a juncture.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art, at the time of the effective filing date of the ’626 patent, “would have had an education background of, or practical experience providing an equivalent to, a Bachelor of Science in Mechanical Engineering, Structural Engineering or a related/equivalent field and at least four years of work experience in construction connector design/development.” Pet. 11 (citing Ex. 1003 ¶¶ 12–15). Patent Owner does not dispute this assessment. PO Resp. 17–18. In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art also may be reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Neither party argues that the outcome of these cases would differ based on our adoption of any particular definition of the level of ordinary skill in the art. Considering the subject matter of the ’626 patent, the background technical field, the prior art, and Petitioner’s proposed and undisputed definition of the skilled artisan, we apply the level of skill set forth above, which is consistent with the testimony of Mr. Fennell (Ex. 1003 ¶¶ 12–15).” slip op. at 20

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “shaped portion configured to receive the structural component,” “a connection portion,” and “an extension portion,” and that “the extension portion spac[es] the channel-shaped portion from the [connection portion]” and “the channel-shaped portion, the extension portion and the connection portion are rigidly fixed with respect to one another.” Ex. 1001, 12:14–36 (emphases added). Claim 1’s repeated use of “portion[s]” to delineate between the three main elements of the hanger, i.e., channel-shaped portion, connection portion, and extension portion, shows or at least strongly suggests substantial flexibility as to the specific location where one “portion” transitions to another “portion” in the fire wall hanger. Similarly, although claim 1 recites that the “channel-shaped portion” is “configured to receive the structural component,” claim 1 recites no limitation precluding other “portions” of the hanger from also “receiv[ing]” or otherwise contacting the structural component. Patent Owner argues that “channel-shaped portion” should be construed to mean “[the] portion of the hanger that forms a channel configured to receive the structural component.” PO Resp. 19. Petitioner and its expert, Mr. Fennell, agree with this meaning (Pet. Reply 4; Ex. 1046 ¶¶ 16–20), and so do we. Indeed, claim 1 plainly recites this as discussed above. But Patent Owner then urges us to narrow the meaning of “portion” itself such that “channel-shaped portion” requires “all portions of the hanger which directly bound the channel that receives the structural component.” PO Resp. 19 (emphases added). Patent Owner argues the Specification makes this “clear.” Id. (citing Ex. 1001, 2:28–31). Contrary to Patent Owner’s arguments (PO Resp. 19), we find no support in claim 1 to further narrow the interpretation of “portion” in “channel-shaped portion” to mean every portion of the hanger which directly bounds the channel that receives the structural component. See Ex. 1001, 12:14–36 (claim 1). We, like Petitioner, similarly find no support in the Specification or limited prosecution history (see Pet. 5–6), and Patent Owner does not direct us to any, showing that the inventor acted as its own lexicographer or disavowed any claim scope to allot this narrowed interpretation to the subject limitation. See Pet. Reply 3 (“Nowhere does the ’626 patent specification describe that all portions of the hanger directly bounding channel 52 constitute the channel-shaped portion.” (citing Ex. 1046 ¶¶ 16–18; Ex. 1001, 4:39–47)); PO Resp. 19.” slip op. at 33

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner argues, inter alia, that Yamaguchi teaches a joist hanger with an extension portion defining a space between its back flange and channel-shaped portion, and Bundy teaches to size a space created by an extension portion of its joist hanger to receive two layers of ⅝-inch-thick drywall between its back flange plane and channel-shaped portion. Pet. 16–18 (citing 1003 ¶¶ 75–78; Ex. 1007, 5:16–18, Fig. 1; Ex. 1041 (“Perspective View”; “Usage View”)); see id. at 17–18 (discussing “advantages” of two layers of 5/8" drywall as “fire resistance in a fire separation wall”). Petitioner argues the skilled artisan “would have been motivated to receive drywall between Yamaguchi’s back flange and channel-shaped portion to provide a shielded fire resistant wooden frame wall.” Pet. 18 (citing Ex. 1003 ¶¶ 78–79; Ex. 1007, 2:10–24); see id. ([“The skilled artisan] would have optimized the size of the spacing between Yamaguchi’s back flange and channel-shaped portion to accommodate two layers of 5/8”-thick-drywall according to the size preference described by Bundy for optimal fire protection and wall integrity.” (citing Ex. 1003 ¶ 80; Ex. 1007, 5:10–22)). Petitioner concludes: This modification to Yamaguchi would have been nothing more than applying a known technique (Bundy’s spacing a hanger seat from a wall frame by distance sufficient to accommodate two 5/8”-thick-drywall sheets for fire resistance) to a similar device (Yamaguchi’s hanger having a spacing of indeterminate length) to obtain the predictable result of a firewall hanger having a space between its channel-shaped portion and a wall frame large enough for receiving drywall therebetween, thereby “protect[ing] the structural members of a building.” Pet. 18 (citing Ex. 1007, 5:18–20; Ex. 1003 ¶ 80). Petitioner argues the skilled artisan would have had a reasonable expectation of success in modifying Yamaguchi as discussed above, “because doing so would still allow Yamaguchi’s hanger to perform its intended function of securing a joist to a wall.” Pet. 18 (citing Ex. 1041, 1; Ex. 1003 ¶ 81). Petitioner argues, “[r]ecognizing that Yamaguchi’s and Bundy’s hangers are constructed from sheet metal,” the skilled artisan “would have understood how to modify the size of Yamaguchi’s extension portions to accommodate two layers of 5/8”-thick-drywall while still allowing Yamaguchi’s hanger to secure a joist’s end to a frame wall.” Pet. 18–19 (citing Ex. 1003 ¶¶ 81–83; Ex. 1007, 4:47–51); see id. at 19–20 (discussing that although “Yamaguchi’s described setting is a sill plate,” the skilled artisan “would have been motivated to use Yamaguchi’s hanger on a wood frame wall in particular so that sheathing could be installed in the space behind the joist as taught by Bundy” (citing Ex. 1003 ¶¶ 81–82)). Based on the foregoing and the complete record before us, we find Petitioner’s cited evidence provides sufficient rational reasons to combine Yamaguchi and Bundy to arrive at the invention of claim 1 with a reasonable expectation of success in doing so.” slip op. at 46

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Analysis Patent Owner argues, “[w]hile the asserted prior art does teach flanges or sidewalls that are in opposed relation to each other, none of Adams, Cullen, or Yamaguchi teach that these flanges or sidewalls engage each other along a juncture.” PO Resp. 42–43; see PO Sur-reply 6 (Patent Owner arguing, “Adams’s, Cullen’s, and Yamaguchi’s extension flanges are spaced well apart.”). Petitioner’s arguments to the contrary depend wholly on its proposed interpretation of the term “engaging” (Pet. 58–60; Pet. Reply 30–31), which we reject, as discussed above. Although Yamaguchi (and Cullen and Adams) may teach extension flanges in opposed, face-to-face relation, Petitioner does not explain, let alone with particularity or persuasively, how Yamaguchi’s (or Cullen’s or Adams’) flanges, which would wind up located on opposing sides of a joist (where a joist is mounted in the hanger), also teach such extension flanges engaging each other along a juncture—indeed, what juncture? See PO Sur-reply 7 (“Beyond asserting that the word ‘engaging’—standing alone—does not require ‘touching contact,’ [Petitioner] still does not address how the extension flanges of Yamaguchi, Cullen, and Adams can be said to ‘engage’ each other.”). Based on the foregoing and the complete record before us, we find Petitioner does not sufficiently establish that the combination of Yamaguchi and Bundy teaches or even fairly suggests a fire wall hanger wherein “the first and second extension flanges engag[e] each other along a juncture, the juncture arranged to be positioned within the two layers of ⅝-inch-thick drywall,” as recited in dependent claims 38 and 91.” slip op. at 70

  Patent outcomesUS 11,649,626 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,649,626
• Simpson Strong-Tie Company Inc. v. Columbia Insurance CompanySome claims unpatentable
  PTAB · Feb 28, 2025 · PGR2023-00049 · APJ Stephen E Belisle · PGR · Final written decision

  Claims 1–37, 39–90, and 92–105 are unpatentable as obvious; claims 38 and 91 were not shown unpatentable because the asserted references did not teach flanges physically touching along a juncture.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art, at the time of the effective filing date of the ’626 patent, “would have had an education background of, or practical experience providing an equivalent to, a Bachelor of Science in Mechanical Engineering, Structural Engineering or a related/equivalent field and at least four years of work experience in construction connector design/development.” Pet. 11 (citing Ex. 1003 ¶¶ 12–15). Patent Owner does not dispute this assessment. PO Resp. 17–18.” slip op. at 20

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “artisan would have interpreted or understood the teachings of Yamaguchi and Bundy, as well as of the combination of those references, are unsupported attorney-arguments. See In re Pearson, 494 F.2d 1399, 1405 (CCPA 1974) (“Attorney’s argument in a brief cannot take the place of evidence.”). Patent Owner cites no evidence of how the skilled artisan would have understood the combined teachings of Yamaguchi and Bundy, or how such an understanding would support Patent Owner’s attorney arguments. Indeed, Patent Owner did not file any expert testimony in any of the three subject cases, despite that we must resolve the legal question of obviousness on the basis of underlying factual determinations, particularly the scope and content of the prior art and any differences between the claimed subject matter and the prior art from the vantage point of the skilled artisan. Graham, 383 U.S. at 17–18; see Pet. Reply 2 (“As a threshold matter, the Board’s findings in its Institution Decision should be carried forward to its final written decision because Patent Owner did not submit an expert declaration in support of its arguments.”); but see PO Sur-reply 1–4 (“[T]here is no requirement that a party rely exclusively on expert testimony in Post Grant Review proceedings or that attorney argument must be disregarded.”). To the contrary, Petitioner’s expert, Mr. Fennell, persuasively testifies in detail how and why the skilled artisan would have combined the teachings and suggestions of Yamaguchi and Bundy to achieve the invention of claim 1, including the features of limitation 1.3.B. See, e.g., Ex. 1003 ¶¶ 73–83, 96; Ex. 1046 ¶¶ 30–40. We find Mr. Fennell’s testimony credible (and uncontroverted).” slip op. at 40

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Judge Rich’s guidance from over thirty years ago: in all aspects of claim construction, “the name of the game is the claim.” In re Hiniker, 150 F.3d at 1369. Claims 38 and 91 recite, in relevant part, a fire wall hanger wherein “the first and second extension flanges engag[e] each other along a juncture, the juncture arranged to be positioned within the two layers of ⅝-inch-thick drywall.” Ex. 1001, 15:28–33, 21:41–46 (emphasis added). On its face, this limitation requires not only that the first and second extension flanges “engage” each other, but also do so “along a juncture.” This recitation of the flanges “engaging” each other along a “juncture” (i.e., a place where things join) strongly supports interpreting the subject limitation to require physical contact (i.e., touching) at least along some portion of the flanges (such as shown in Figure 2, reproduced above). To the contrary, nothing in claims 38 or 91, or their underlying independent claims, suggests that two flanges “engaging each other along a juncture” means or even includes within its scope two flanges “symmetrical to each other across a juncture,” as urged by Petitioner (Pet. 59).” slip op. at 67

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “Petitioner persuasively argues, and we agree: There is certainly no requirement that the hanger contain a component “that prevents the back face of the drywall (or any portion thereof) being secured directly to the face of the wall framing” or that the back flange plane “define” or “bound” the space that receives drywall as alleged by Patent Owner. POR [PO Resp.], 25-26. As explained in the Petition and supported by Mr. Fennell’s testimony, Yamaguchi-Bundy’s modified hanger has an extension portion that is long enough to permit two layers of 5/8-inch-thick drywall (i.e., an extending flange having a length over 1 and 1/4 inches) to be received between the channel-shaped portion and the back flange plane. Pet., 28-30, 37; EX1003, ¶96. That is all that is required. EX1046, ¶32. Pet. Reply 12.” slip op. at 38

  Patent outcomesUS 11,649,626 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,649,626
• Simpson Strong-Tie Company Inc. v. Columbia Insurance CompanySome claims unpatentable
  PTAB · Feb 28, 2025 · PGR2023-00047 · APJ Stephen E Belisle · PGR · Final written decision

  Claims 1–37, 39–90, and 92–105 are unpatentable as obvious; claims 38 and 91 were not shown unpatentable because the cited art did not teach flanges physically touching along a juncture.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art also may be reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Neither party argues that the outcome of these cases would differ based on our adoption of any particular definition of the level of ordinary skill in the art. Considering the subject matter of the ’626 patent, the background technical field, the prior art, and Petitioner’s proposed and undisputed definition of the skilled artisan, we apply the level of skill set forth above, which is consistent with the testimony of Mr. Fennell (Ex. 1003 ¶¶ 12–15).” slip op. at 20

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “But Patent Owner then urges us to narrow the meaning of “portion” itself such that “channel-shaped portion” requires “all portions of the hanger which directly bound the channel that receives the structural component.” PO Resp. 19 (emphases added). Patent Owner argues the Specification makes this “clear.” Id. (citing Ex. 1001, 2:28–31). Contrary to Patent Owner’s arguments (PO Resp. 19), we find no support in claim 1 to further narrow the interpretation of “portion” in “channel-shaped portion” to mean every portion of the hanger which directly bounds the channel that receives the structural component. See Ex. 1001, 12:14–36 (claim 1). We, like Petitioner, similarly find no support in the Specification or limited prosecution history (see Pet. 5–6), and Patent Owner does not direct us to any, showing that the inventor acted as its own lexicographer or disavowed any claim scope to allot this narrowed interpretation to the subject limitation. See Pet. Reply 3 (“Nowhere does the ’626 patent specification describe that all portions of the hanger directly bounding channel 52 constitute the channel-shaped portion.” (citing Ex. 1046 ¶¶ 16–18; Ex. 1001, 4:39–47)); PO Resp. 19. Further, as argued by Petitioner (Pet. Reply 4–5), Patent Owner’s proposed construction limiting “portion” to “all portions” of the hanger that “directly bound the channel that receives the structural component” could cause the “channel-shaped portion” on the same physical hanger to change depending on which type of structural component an installer were to choose to use in construction: Patent Owner’s claim construction improperly focuses on the wall assembly intended to be used with the recited hanger. The claims, however, are directed to a hanger, not a wall assembly. When assessing what part of a hanger constitutes a “channel-shaped portion” and an “extension portion,” [the skilled artisan] would consider the physical features of the hanger itself and the natural divisions between those features. [The skilled artisan] would not assess the claim language and its application to the prior art by speculating how an installer might later install the hanger with a joist or an entire wall assembly, which may differ from installation to installation. Pet. Reply 4 (citing Ex. 1046 ¶ 19). We find this defect further supports a broader interpretation of “channel-shaped portion” as discussed above. Accordingly, based on the complete record before us, we determine” slip op. at 34

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner argues, inter alia, that Yamaguchi teaches a joist hanger with an extension portion defining a space between its back flange and channel-shaped portion, and Bundy teaches to size a space created by an extension portion of its joist hanger to receive two layers of ⅝-inch-thick drywall between its back flange plane and channel-shaped portion. Pet. 16–18 (citing 1003 ¶¶ 75–78; Ex. 1007, 5:16–18, Fig. 1; Ex. 1041 (“Perspective View”; “Usage View”)); see id. at 17–18 (discussing “advantages” of two layers of 5/8" drywall as “fire resistance in a fire separation wall”). Petitioner argues the skilled artisan “would have been motivated to receive drywall between Yamaguchi’s back flange and channel-shaped portion to provide a shielded fire resistant wooden frame wall.” Pet. 18 (citing Ex. 1003 ¶¶ 78–79; Ex. 1007, 2:10–24); see id. ([“The skilled artisan] would have optimized the size of the spacing between Yamaguchi’s back flange and channel-shaped portion to accommodate two layers of 5/8”-thick-drywall according to the size preference described by Bundy for optimal fire protection and wall integrity.” (citing Ex. 1003 ¶ 80; Ex. 1007, 5:10–22)). Petitioner concludes: This modification to Yamaguchi would have been nothing more than applying a known technique (Bundy’s spacing a hanger seat from a wall frame by distance sufficient to accommodate two 5/8”-thick-drywall sheets for fire resistance) to a similar device (Yamaguchi’s hanger having a spacing of indeterminate length) to obtain the predictable result of a firewall hanger having a space between its channel-shaped portion and a wall frame large enough for receiving drywall therebetween, thereby “protect[ing] the structural members of a building.” Pet. 18 (citing Ex. 1007, 5:18–20; Ex. 1003 ¶ 80). Petitioner argues the skilled artisan would have had a reasonable expectation of success in modifying Yamaguchi as discussed above, “because doing so would still allow Yamaguchi’s hanger to perform its intended function of securing a joist to a wall.” Pet. 18 (citing Ex. 1041, 1; Ex. 1003 ¶ 81). Petitioner argues, “[r]ecognizing that Yamaguchi’s and Bundy’s hangers are constructed from sheet metal,” the skilled artisan “would have understood how to modify the size of Yamaguchi’s extension portions to accommodate two layers of 5/8”-thick-drywall while still allowing Yamaguchi’s hanger to secure a joist’s end to a frame wall.” Pet. 18–19 (citing Ex. 1003 ¶¶ 81–83; Ex. 1007, 4:47–51); see id. at 19–20 (discussing that although “Yamaguchi’s described setting is a sill plate,” the skilled artisan “would have been motivated to use Yamaguchi’s hanger on a wood frame wall in particular so that sheathing could be installed in the space behind the joist as taught by Bundy” (citing Ex. 1003 ¶¶ 81–82)). Based on the foregoing and the complete record before us, we find” slip op. at 46

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “artisan would have interpreted or understood the teachings of Yamaguchi and Bundy, as well as of the combination of those references, are unsupported attorney-arguments. See In re Pearson, 494 F.2d 1399, 1405 (CCPA 1974) (“Attorney’s argument in a brief cannot take the place of evidence.”). Patent Owner cites no evidence of how the skilled artisan would have understood the combined teachings of Yamaguchi and Bundy, or how such an understanding would support Patent Owner’s attorney arguments. Indeed, Patent Owner did not file any expert testimony in any of the three subject cases, despite that we must resolve the legal question of obviousness on the basis of underlying factual determinations, particularly the scope and content of the prior art and any differences between the claimed subject matter and the prior art from the vantage point of the skilled artisan. Graham, 383 U.S. at 17–18; see Pet. Reply 2 (“As a threshold matter, the Board’s findings in its Institution Decision should be carried forward to its final written decision because Patent Owner did not submit an expert declaration in support of its arguments.”); but see PO Sur-reply 1–4 (“[T]here is no requirement that a party rely exclusively on expert testimony in Post Grant Review proceedings or that attorney argument must be disregarded.”). To the contrary, Petitioner’s expert, Mr. Fennell, persuasively testifies in detail how and why the skilled artisan would have combined the teachings and suggestions of Yamaguchi and Bundy to achieve the invention of claim 1, including the features of limitation 1.3.B. See, e.g., Ex. 1003 ¶¶ 73–83, 96; Ex. 1046 ¶¶ 30–40. We find Mr. Fennell’s testimony credible (and uncontroverted).” slip op. at 40

  Patent outcomesUS 11,649,626 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,649,626
• Lifecore Fitness, LLC D/B/A Assault Fitness v. Woodway USA, Inc.Some claims unpatentable
  PTAB · Oct 24, 2024 · IPR2023-00849 · APJ Amee A Shah · IPR · Final written decision

  Claims 1, 4, 7–12, 14, 17, and 21–25 are unpatentable as obvious; claims 18, 20, 26, and 27 were not shown unpatentable.

  RulingsFinal written decision

  • Prior constructionPrior construction adoptedOther

    “1. “safety device” For the ’745 patent, the District Court construed “safety device” as “a” slip op. at 20

  • Skill levelOther

    “B. LEVEL OF ORDINARY SKILL IN THE ART In determining the level of ordinary skill in the art, various non-” slip op. at 17

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusNot shown unpatentable

    “5. Objective Indicia of Nonobviousness a) Legal Standards Objective evidence of non-obviousness “may often be the most probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean, 699 F.3d at 1349. Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, objective evidence of nonobviousness (or “secondary considerations”) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Thus, our obviousness analysis includes consideration and weighing of Patent Owner’s indicia of nonobviousness.” slip op. at 72

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “cited by Petitioner, we find that on this record, Petitioner has demonstrated by a preponderance of evidence obviousness of claims 1, 4, 7–12, 14, 17, and 21–25 but has not demonstrated by a preponderance of evidence obviousness of claims 18 and 20 based on Socwell, Magid, and Sclater.” slip op. at 82

  Patent outcomesUS 10,799,745 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,799,745

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.