- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Medivis, Inc. v. Novarad Corp.Some claims unpatentablePTAB · Oct 1, 2026 · IPR2023-00042 · APJ Scott Raevsky · IPR · Remand
Claims 1–6, 11, and 20 are unpatentable as obvious over Doo and Amira; claims 12–19 were not shown unpatentable because the asserted tissue properties were not shown in Amira.
RulingsRemand decision- RemandOther
“Federal Circuit. The court issued its decision in Medivis, Inc. v. Novarad Corp., No. 2024-1794, 2026 WL 587294 (Fed. Cir. Mar. 3, 2026) (“Medivis”) (Paper 40),1 affirming-in-part, reversing-in-part, and remanding our Final Written Decision (Paper 35) for further proceedings. In its opinion, the Federal Circuit reversed our “determination of no motivation to combine Doo and Amira” and remanded for further proceedings to evaluate whether claims 1–6 and 11–20 (“the Remanded Claims”) of U.S. Patent No. 11,004,271 B2 (“the ’271 patent,” Ex. 1001) are unpatentable in view of Petitioner’s obviousness challenge over Doo and Amira. Medivis, slip op. at 9–10. We have jurisdiction under 35 U.S.C. § 6(b). We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Medivis, Inc. (“Petitioner”) and Novarad Corp. (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Medivis, we hold that Petitioner has demonstrated, by a preponderance of the evidence, that claims 1–6, 11, and 20 are unpatentable; however, Petitioner has not demonstrated, by a preponderance of the evidence, that claims 12–19 are unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We adopt Petitioner’s proposed level of skill, except that we excise part of Petitioner’s definition to produce the following modified version: 4 Throughout this decision, we eliminate the parties’ italicization of reference names from quotations without noting “emphasis omitted.” 5 Doo, WO 2015/164402 A1, published October 29, 2015 (Ex. 1008). 6 Excerpt of Amira 5 User’s Guide, title through Chapter 2 (Visual Imaging 2009) (Ex. 1005). engineering, or a related field with several years of experience in the design, development, and study of augmented reality devices and . . . familiarity with conventional medical imaging data and visualization of data for medical procedures . . . . Our edit removes the alternative of “working with a team including someone with such familiarity” because one’s role in a team may be tangential to their personal experience with medical imaging. Regardless, had we adopted Petitioner’s original definition, our decision would not have changed.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We agree with Petitioner that the term “3D slices” has no apparent connection to the phrase “direct volume rendering.” Patent Owner’s argument appears to be that DVR “requires an image of the entire anatomical volume that is neither feature-specific nor segmented, [which] would seemingly require that all inner layers be displayed.” Reply 4; see Sur-reply 6–10 (not disputing Petitioner’s characterization). But, as Petitioner notes, the specification directly undermines this by teaching “display [of] a slice of the 3D data instead of a volume of the 3D data.” See Reply 4 n.2 (quoting Ex. 1001, 5:34–35). In other words, to the extent DVR would depict an image of the entire anatomical volume, displaying 3D slices “instead of a volume of the 3D data” implies the opposite of DVR. Even if “3D slices” somehow implied DVR, Patent Owner’s position is still untenable. Claim 1 does not recite “3D slices.” Instead, claim 1 recites “3D data” and “inner layers.” Ex. 1001, 18:54–65. Patent Owner fails to clarify the relationship between “slices,” “3D data,” and “layers,” and its expert even admits that slices and layers are two different things. See PO Resp. 13; Ex. 1022, 32:7–16 (agreeing that the words “slice” and “layer” are not “synonyms”), cited in Reply 4. We also agree with Petitioner that dependent claim 3 distinguishes slices and layers by reciting “slices of the projected inner layer.” Reply 4 (quoting Ex. 1001, 19:3–10). Thus, even if 3D slices somehow implied DVR, the language of claim 1 does not support limiting the claim this way.” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“The determination of whether a document was publicly accessible “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). For instance, courts routinely rely on the Wayback Machine to determine when a reference was first made available to the public. Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021) (“District courts have taken judicial notice of the contents of webpages available through the Wayback Machine ‘as facts that can be accurately and readily determined from sources whose accuracy cannot reasonably be questioned.’”). We disagree with Patent Owner’s argument that “Medivis cannot rely on additional prior art”—Exhibits 1023 and 1024—“that was submitted after its Petition to carry its burden without leave from the Board.” Sur-reply 4. As Patent Owner did not file a motion to exclude these exhibits, we decline Patent Owner’s invitation to disregard them. We also find Petitioner’s Reply argument proper because it directly responds to Patent Owner’s contention that Petitioner did not prove the public accessibility of Amira. See Chamberlain Grp., Inc. v. One World Techs., Inc., 944 F.3d, 919, 925 on issues previously raised.”). Petitioner’s Reply argument appropriately elaborates on the Petition’s contention that Amira was publicly accessible. Patent Owner also does not dispute the substance of Petitioner’s evidence. For example, Patent Owner does not address the substance of Mr. Frank-White’s declaration. We find that this evidence, including Mr. Frank- White’s declaration testimony, persuasively supports the public availability of Amira as of the date shown in the Wayback Machine URL. See Ex. 1024.” slip op. at 22
Patent outcomesUS 11,004,271 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 11,004,271 - Alliance Laundry Systems, LLC v. Payrange LLCSome claims unpatentablePTAB · Aug 19, 2026 · PGR2025-00027 · APJ George R Hoskins · PGR · Final written decision
Claims 1–6 and 8–20 are unpatentable under § 101; claim 7 was not shown unpatentable.
RulingsFinal written decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Pet.”) pursuant to 35 U.S.C. §§ 321–329 to institute a post-grant review of U.S. Patent No. 11,966,920 B2 (Ex. 1001, “the ’920 patent”), claims 1–20. We issued an Institution Decision (Paper 12) granting the petitioned review. slip op. at 2
- Skill levelOther
“B. Level of Ordinary Skill in the Art Petitioner contends a person having ordinary skill in the art pertaining” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“thereby supporting our conclusion that the plain and ordinary meaning of “affordance” in claim 1 refers to an interactive user interface element.” slip op. at 30
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“For the foregoing reasons, we conclude Petitioner’s reliance on Low’s” slip op. at 21
Patent outcomesUS 11,966,920 mixedClaim construction§ 101 eligibility§ 103 obviousnesscites Alice · Mayo · Bilski · Berkheimer · Enfish · Electric Power · KSRPatents in suitUS 11,966,920 - Alliance Laundry Systems, LLC v. Payrange LLCSome claims unpatentablePTAB · Aug 19, 2026 · PGR2025-00028 · APJ George R Hoskins · PGR · Final written decision
Claims 1–6 and 8–20 are unpatentable under § 102, § 103, or § 101; claim 7 was not shown unpatentable because the asserted grounds did not establish its limitations.
RulingsFinal written decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“1. Legal Standards “Anticipation requires that every limitation of the claim in issue be” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed
“2016) (alteration in original) (quoting Kinetic Concepts, 688 F.3d at 1368). Further, an assertion of obviousness “cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” KSR, 550 U.S. at 418 (quoting In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)); accord In re NuVasive, Inc., 842 F.3d 1376, 1383 (Fed. Cir. 2016) (stating that “conclusory statements” amount to an “insufficient articulation[] of motivation to combine”; “instead, the finding must be supported by a ‘reasoned explanation’” (quoting In re Lee, 277 F.3d 1338, 1342 (Fed. Cir. 2002))); In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016) (“To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.”).” slip op. at 36
- Patent Eligibility (§101) › Alice/Mayo step one — 'directed to'Step1 directed to exceptionMixed
“because the “user interface” limitations merely apply the recited abstract idea on a generic mobile device without meaningfully limiting the abstract idea. See 2025 Guidance, at 4–5. For example, these limitations do not reflect an improvement to the functioning of the mobile device (or any other computer device), and instead are “mere instructions to implement an abstract idea or other exception on” the mobile device. Id. Indeed, the ’423 patent specification describes only a generic “swipe-to-pay” feature. See, e.g., Ex. 1001, 7:13–33, Figs. 8C, 10A–10D. This supports our conclusion here that the claim 11 limitations do not integrate the recited abstract idea into a practical application. See MPEP § 2106.04(d)(1) (“[T]he specification should be evaluated to determine if the disclosure provides sufficient details such that one of ordinary skill in the art would recognize the claimed invention as providing an improvement,” and “it must describe” slip op. at 108
- Patent Eligibility (§101) › Alice/Mayo step two — inventive conceptStep2 no inventive conceptMixed
“because the “user interface” limitations merely apply the recited abstract idea on a generic mobile device without meaningfully limiting the abstract idea. See 2025 Guidance, at 4–5. For example, these limitations do not reflect an improvement to the functioning of the mobile device (or any other computer device), and instead are “mere instructions to implement an abstract idea or other exception on” the mobile device. Id. Indeed, the ’423 patent specification describes only a generic “swipe-to-pay” feature. See, e.g., Ex. 1001, 7:13–33, Figs. 8C, 10A–10D. This supports our conclusion here that the claim 11 limitations do not integrate the recited abstract idea into a practical application. See MPEP § 2106.04(d)(1) (“[T]he specification should be evaluated to determine if the disclosure provides sufficient details such that one of ordinary skill in the art would recognize the claimed invention as providing an improvement,” and “it must describe” slip op. at 108
Patent outcomesUS 11,972,423 mixed§ 101 eligibility§ 102 anticipation§ 103 obviousnesscites Alice · Mayo · Bilski · Enfish · Electric Power · KSR · GrahamPatents in suitUS 11,972,423 - Embody, Inc. / Zimmer Biomet Holdings, Inc. v. Lifenet HealthSome claims unpatentablePTAB · Aug 4, 2026 · IPR2025-00249 · APJ Michael J Fitzpatrick · IPR · Final written decision
Claims 1 and 4–8 are unpatentable: claims 1 and 4–6 as obvious over Huang2 and Kuo, and claims 7–8 as anticipated by Huang2; claims 2–3 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for patent owner
“(“POSITA”) “would be a Ph.D. student with a minimum of two years of experience in their faculty advisor’s laboratory” and would have an understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 20– 21 (citing Ex. 1003 § II.C7). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner
“At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:28–29. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”). Importantly, the Specification does not treat the existence of minor peaks as prerequisites for the existence of major peaks. Indeed, the Specification does not discuss “minor peaks” at all. See generally Ex. 1001. Likewise, none of the claims of the ’227 patent, whether challenged or unchallenged, recites “minor peaks” or any additional peaks beyond the disputed “major peaks.” Id. at 23:30–24:42. Nor does the Specification include an example of FFT analysis results in which the average of the peaks therein is calculated and those higher than the average are identified as major peaks.8” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMixed
“Petitioner has the better position. Huang2 teaches crosslinking and provides a reason for doing so (stability). In particular, Huang2 states: “To better mimic skin ECM, electrospun collagen fibers have been fabricated, however, the rapid degradation and poor mechanical properties determine that either crosslinking or combination with other materials is necessary to obtain a stable scaffold.” Ex. 1005, 1791 (emphasis added). It is true that, in describing work actually carried out, Huang2 states that blending with PCL was performed and does not mention crosslinking. See id. at 1792 (“Nanofibrous matrices of PCL and Collagen at a weight ratio of 3:1 were fabricated using electrospinning as previously described.”). However, the prior art – here, Huang2 – is not limited to that which it describes having created. See In re Mills, 470 F.2d 649, 651 (C.C.P.A. 1972) (“a reference is not limited to the disclosure of specific working examples”); see also In re Lemelson, 397 F.2d 1006, 1009 (CCPA 1968) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”); In re Fritch, 972 F.2d 1260, 1264 (Fed. Cir. 1992) (“It is well settled that a prior art reference is relevant for all that it teaches to those of ordinary skill in the art.”). Huang2 teaches two stabilization methods when using collagen in scaffolds. Huang2 states that one or the other “is necessary to obtain a stable scaffold” (when using collagen), but it does not preclude or teach away from using Patent Owner-cited testimony of Dr. Mikos is not as definitive as Patent Owner suggests; Dr. Mikos’s testimony is that a person of ordinary skill in the art “typically would not have done both.” Ex. 2015 ¶64 (emphasis added). The bottom line is that Huang2 teaches the person of ordinary skill in the art two ways to stabilize scaffolds/matrices comprised of collagen, provides a reason for doing so (stability), and does not teach away from using both. We are persuaded that a “scaffold comprising crosslinked fibers comprising collagen” would have been obvious in view of the cited teachings of Huang2.” slip op. at 33
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We are not persuaded by Appellant’s citations to either reference. As discussed above, Petitioner’s Ground 1 is premised on a person of ordinary skill in the art altering the native flat sheet structure of Huang2 by rolling it into a jelly-roll structure as taught by Kuo. See Pet. 41 (Beginning its claim 2 arguments with the following: “Claim 1 is obvious for the reasons expressed above in § X.A., supra, which are incorporated herein.”); see also Pet. Reply 17 (“[B]ased on the explicit teaching of Kuo, a POSA would have been motivated to take the electrospun flat scaffold made by the techniques of Huang2, seed it with the desired cells, and roll it to treat a tendon and ligament.” (emphasis added)). Indeed, the paragraphs of Kuo that Petitioner cites for disclosing “scaffold sheets,” explicitly describe rolling them into jelly-roll like structures. See Ex. 1018 ¶7 (stating that “the sheet is spirally contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct”), ¶22 (describing a method comprising “forming a tissue construct by contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct” and implanting it in a patient). Petitioner fails to argue that that “one or more elongated sheets” recited in claim 2 would encompass the rolled structure of its proposed modification. Nor does Petitioner articulate a claim construction argument that could support such an argument. Petitioner has failed to prove, by a preponderance of the evidence, that claim 2 would have been obvious over Huang2 and Kuo.” slip op. at 42
Patent outcomesUS 11,318,227 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman · KSRPatents in suitUS 11,318,227 - Klipsta Pty Ltd v. Lindsay AlbaneseSome claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00346 · APJ Annette R Reimers · IPR · Final written decision
Claim 16 is unpatentable as obvious over the asserted grounds; claims 1–15, 17, and 18 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Petitioner contends that a person having ordinary skill in the art at the time of the invention (“POSITA”) “would be a regular consumer/shopper with a rudimentary knowledge of the use of magnetic clips and a basic understanding of clip construction.” Pet. 13. We find that the ’047 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of skill reflected in these references and in the ’047 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10
- BurdenMixed
“Petitioner’s mapping of the components of KR ’458’s fastening device is insufficient. Although Petitioner maps the center line of fastening member 115 to the recited second end, Petitioner fails to adequately map the recited first end of the second strap or explain why one of skill in the art would consider the second ferromagnetic member (convex member 117) to be disposed at the first end of the second strap as required by claim 1. that the first end is “upward to connector 117.” Pet. 24. This is not the end of the second strap. As discussed above, the end of the second strap wraps around rectangular ring 210 and is then secured to itself.7 Connector 117 is positioned below the true end of the strap, more in the middle of this segment of the strap. In other words, Petitioner arbitrarily defines the strap as only the portion of hat holder 110 between the center line and connector 117, in contradiction to what KR ’458 actually discloses. Nowhere does Petitioner explain why connector 117 is disposed at the first end of the second strap. Neither does Petitioner explain why we should disregard the true end of the strap, nor why one of skill in the art would consider only a middle portion of the strap to be the second strap. Thus, Petitioner has not satisfied its burden in this regard. Therefore, Petitioner has not shown that KR ’458 discloses “a second strap having a first end and a second end, the second strap joined to the first strap,” with “a second ferromagnetic member disposed at the first end of the second strap.” For the foregoing reasons, we determine that a preponderance of the evidence does not support that claim 1 is anticipated by KR ’458.” slip op. at 23
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“The ’047 patent discloses that in addition to being separate straps, the rear strap and the front strap “can be formed from a single piece of material.” Ex. 1001, 3:40–44, 5:24–32, 10:18–25. In particular, Figures 5A–5B of the ’047 patent illustrate rear strap 510 and front strap 520 as being “formed from a single piece of material that is folded approximately in half where a first half can be the rear strap 510 and a second half can be the front strap 520.” Id. at 10:18–21, Figs. 5A–5B. Indeed, Patent Owner acknowledges “[i]t should be noted that forming the first and second straps from a single piece of material is well within the scope of the claimed invention.” Ex. 1007, 5 (citing the ’047 patent at 3:37–44). Moreover, we note the positions taken by the parties are consistent with the fact that claim second strap are formed from a single folded strap.” Ex. 1001, 14:47–48. We, therefore, adopt Petitioner’s construction of “the second strap joined to the first strap” to include “a single piece of material.”” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Petitioner’s construction of a “hook” to include a “structure that serves to attach the hat holder to another object” is based on function, rather embodiments in the Specification of the ’047 patent. Although strap-style hook 340 of Figures 3A–3C is a flexible component rather than a more rigid component like hook 140 shown in Figures 1A–1C , both can be considered types of hooks. All of the embodiments, whether rigid or flexible, can be considered to have a hook-like structure when serving the function of attaching the hat holder to another object. Petitioner’s proposed construction would render the term “hook” meaningless, as various types of structures could be used to attach the hat holder to another object, that would not reasonably be considered to be a “hook.” For example, a snap, safety pin, ring, or button could be used to attach a hat holder to another object. Petitioner’s identification of different embodiments in the ’047 patent of hook-like structures does not show why one of skill in the art would consider almost any structure to be considered a “hook.” We, therefore, reject Petitioner’s construction of a “hook” as a “structure that serves to attach the hat holder to another object.” “wherein the first strap and the second strap are configured to retain a” slip op. at 12
Patent outcomesUS 10,413,047 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,413,047 - Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentablePTAB · Jun 10, 2026 · IPR2025-00350 · APJ Jason M Repko · IPR · Final written decision
Claims 7–12 were held unpatentable over Wannamaker alone or with Avellan; claims 1–6 and 13 were not shown unpatentable because Avellan did not teach the claimed screen-capture sequence and assembly.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art. PO Resp. 17. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 19–20; PO Resp. 18. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding.” slip op. at 5
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Yet paragraph 122 of Mr. Lipoff’s declaration merely repeats the Petition’s argument almost verbatim. Compare Ex. 1007 ¶ 122, with Pet. 28. Mr. Lipoff does not add any citation to Avellan or any other source that supports his testimony. See Ex. 1007 ¶ 122. Nor does Mr. Lipoff offer any additional technical reasoning than what is stated in the Petition. Testimony may be entitled to little weight if it merely restates the petition’s unsupported, conclusory assertions without adding supporting evidence or technical reasoning. Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). That is the case here.” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We are persuaded by Patent Owner’s argument that claim 1 is not obvious over Avellan because it does not assemble a media stream of multimedia items using the recited screen captures. See PO Resp. 21–23. We agree with Patent Owner that the plain language of the claim requires more than transmitting individual media items. PO Sur-reply 20. To the extent that Avellan captures images, those images do not meet the claimed requirements for a “temporal sequence of screen captures” in the independent claims, which must (1) be of the web page rendered by a browser, (2) “define all the content of the web page at a given time,” (3) “illustrate a dynamic change of at least a portion of the content over time” when two of them are compared, and (4) used to assemble “the at least one media stream.” Rather, the record better supports Patent Owner’s argument that Avellan transmits the multimedia items separate from any media stream assembled from screen captures. PO Resp. 21–23; PO Sur-reply 20.” slip op. at 7
Patent outcomesUS 10,524,002 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 10,524,002 - Stingray Group Inc. / Stingray Music USA, Inc. v. Edwin A. Hernandez-MondragonSome claims unpatentablePTAB · May 28, 2026 · IPR2025-00351 · APJ Brian P Murphy · IPR · Final written decision
Claims 1–9 are unpatentable as obvious over the stated combinations; claims 10–26 were not shown unpatentable because Avellan does not teach limitations [10d]–[10f].
RulingsFinal written decision- Skill levelOther
“would have a bachelor’s or equivalent degree in computer science or a related field and at least 2 years of experience in multimedia processing or delivery using internet protocols.” Pet. 10 (citing Ex. 1002 ¶¶ 67–68). The Petition further states that “a person with less formal education but more experience, or more formal education but less experience, could have also met the relevant standard for a POSITA.” Id. Patent Owner submits a similar definition and does not take issue with the Petition’s characterization of the level of ordinary skill in the art of delivering multimedia content. Resp. 18. We determine that no express finding is necessary and that the level of ordinary skill in the art is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978). Any perceived difference in how each party characterizes a POSITA’s education, knowledge, and work experience does not change our analysis or conclusions. slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Neither party has offered any claim construction arguments, relying on ordinary and customary meaning. Pet. 11; Resp. 18–19; Reply 5. We determine that construction of claim terms is not necessary to resolve the disputes raised by the parties in this proceeding. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Expert testimonyPetitioner expert creditedDecided for petitioner
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentableNot shown unpatentable
“To establish inherency, the extrinsic evidence “must make clear that the missing descriptive matter is necessarily present in the thing described in the reference, and that it would be so recognized by persons of ordinary skill.” Continental Can Co. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991). “‘Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.’” Id. at 1269 (quoting In re Oelrich, 666 F.2d 578, 581 (C.C.P.A. 1981)). Reasonable inferences of a POSITA may suffice to establish inherent disclosure in a prior art reference such as Farber. See Eli Lilly v. Los Angeles Biomedical Research Institute, 849 F.3d 1073, 1074–1075 (Fed. Cir. 2017) (“[T]he dispositive question regarding anticipation is whether one skilled in the art would reasonably understand or infer from a prior art reference that every claim element is disclosed in that reference.”). Here, however, we find the Petition’s argument and evidence insufficient to establish by a preponderance of the evidence that Farber inherently discloses limitation [1b].” slip op. at 16
Patent outcomesUS 11,140,441 mixedClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,140,441 - Stryker Corporation / Wright Medical Technology, Inc v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01452 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8, 9, 13, and 19 are unpatentable; claims 2–5, 11, 12, 17, and 18 were not shown unpatentable over Slater or Slater and Weaver.
RulingsRemand decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 11, 12, 17, and 18 of the ’716 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“In its Petition, Petitioner contends that Weaver discloses the limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 36–39; Ex. 1002 ¶¶ 188–196. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 191– 196. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 36.” slip op. at 18
Patent outcomesUS 9,763,716 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,763,716 - Stryker Corporation / Wright Medical Technology, Inc. v. Osteomed LLCSome claims unpatentablePTAB · May 4, 2026 · IPR2021-01450 · APJ Sheridan K Snedden · IPR · Remand
On remand, claims 6, 8–10, 14, and 17 are unpatentable; claims 2–5, 12, and 13 were not shown unpatentable, based on anticipation by Slater and obviousness over Slater and Weaver.
RulingsRemand decision- RemandMixed
“Appeals for the Federal Circuit. The court issued its decision in Stryker Corp. v. OsteoMed LLC, No. 2023-1925, 2025 WL 2814019 (Fed. Cir. Oct. 3, 2025) (“Stryker”) (Paper 49),1 affirming-in-part, reversing-in-part, vacating and remanding-in-part our Final Written Decision (Paper 46) for further proceedings. In its opinion, the Federal Circuit reversed our finding of no anticipation as to independent claims 1 and 11 of U.S. Patent No. 8,529,608 B2 (“the ’608 patent,” Ex. 1001), and vacated and remanded for further proceedings to evaluate whether dependent claims 2–6, 8–10, 12–14, and 17 (the “Remanded Claims”) are similarly unpatentable in view of Petitioner’s challenges relying on the Slater reference. Stryker, slip op. at 14–15. We have jurisdiction under 35 U.S.C. § 6. We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Stryker Corporation and Wright Medical Technology, Inc. (collectively, “Petitioner”) and OsteoMed LLC (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Stryker, we find by a preponderance of the evidence that claims 6, 8–10, 14, and 17 are unpatentable. We also conclude that Petitioner has not demonstrated, by a preponderance of the evidence, that claims 2–5, 12, and 13 are unpatentable.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“Accordingly, for the same reasons expressed by our previous decision addressing claim 8 of the ’085 patent, and the court’s analysis in Stryker, we conclude that Slater does not anticipate claims 2–5, 12, and 13 of the ’608 patent because Slater deliberately describes a variable angle hole that lacks a single predetermined angle—that is, Slater describes a transfixation screw hole that does not have a central axis defining the trajectory.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“limitations in claim 6 and that it would have been obvious to add Weaver’s features to Slater’s plate to provide a more secure fixation between the screws and the plate. Pet. 37–39; Ex. 1002 ¶¶ 161–169. Specifically, Petitioner contends that configuring Slater’s transfixation screw hole (claim 6) or at least one of Slater’s attachment points (claim 8) as a threaded screw hole to lockably engage the head of a locking screw would have been an obvious design choice “because locking screws ‘provide a high resistance to shear or torsional forces’ and reduce the incidence of screw loosening.” Pet. 39 (quoting Ex. 1009, 1:57–58); Ex. 1009, 1:46–48; Ex. 1002 ¶¶ 162– 163. Petitioner otherwise relies on its anticipation analysis for claim 1 discussed above. Pet. 37. Patent Owner raised no separate argument regarding the patentability of claims 6 and 8, instead relying solely on its argument that Slater does not anticipate independent claim 1, on which claims 6 and 8 depend. PO Resp. 46; Reply 4 (“Patent Owner does not challenge the combination of Slater and Weaver for claims 6 and 8.”). We have reviewed Petitioner’s arguments and evidence as to the undisputed limitations of claims 6 and 8 and find that Petitioner establishes that the combination of Slater and Weaver discloses all of the limitations of claims 6 and 8, and that one of ordinary skill in the art would have been motivated to combine Slater and Weaver for the reasons provided by Petitioner. We adopt Petitioner’s arguments and evidence as to these limitations as our own. See Pet. 37–39.” slip op. at 19
Patent outcomesUS 8,529,608 mixed§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,608
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.