• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• CSPC Pharmaceutical Group Limited / CSPC Ouyi Pharmaceutical Co., Ltd. et al. v. Ipsen Biopharm Ltd.Some claims unpatentable
  PTAB · Aug 13, 2026 · IPR2025-01531 · APJ Zhenyu Yang · IPR · Final written decision

  Claims 1, 3–6, and 8–14 are unpatentable as obvious; claims 2, 7, and 15 were not shown unpatentable because the prior art did not establish the claimed drug sequence.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner states that, for purposes of this proceeding, it does not dispute Petitioner’s proposed definition of a POSA. PO Resp. 8. Based on the entirety of the trial record, we adopt Petitioner’s proposed definition of a POSA’s skill level because it is consistent with the skill level reflected in the disclosures of the ’552 patent and prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We decline to discount Dr. Oberstein’s opinion based on the alleged conflict of interest and bias. Dr. Oberstein testified that the consulting fees he receives from Patent Owner reflect a small fraction of his income. Ex. 1210, 402:21–403:9. We also agree with Patent Owner that an oncologist prescribing an FDA-approved regimen does not evince bias. See Sur-reply 23; see also Ex. 1206, 49 (showing NALIRIFOX is a category 1, NCCN-preferred first-line therapy for metastatic pancreatic cancer), 69 (explaining category 1 is based upon high-level evidence). Petitioner also contends that Dr. Oberstein “offers conclusory opinions,” “fails to properly apply the law, continues to look at each reference in isolation, refuses to acknowledge logical suggestions in the art, and imports new limitations into the claims.” Reply 3–4. We evaluate each piece of evidence, including Dr. Oberstein’s opinion, as it relates to our substantive patentability analysis, and accord it proper weight.” slip op. at 9

  • ExcludeMotion to exclude, deniedDenied

    “Petitioner, as the moving party, bears the burden of proving that the material sought to be excluded is inadmissible under the Federal Rules of Evidence. See 37 C.F.R. §§ 42.20(c), 42.62(a); see also Trial Practice Guide (“TPG”)15 § II.K (“A motion to exclude must explain why the evidence is not admissible.”). For the reasons explained below, we deny Petitioner’s Motion.” slip op. at 17

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “only on a ground that could be raised under section 102 or 103 and only on the basis of prior art consisting of patents or printed publications.” 35 U.S.C. § 311(b). Whether a reference qualifies as a “printed publication” involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is publicly accessible upon a satisfactory showing that such document has been disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence can locate it. Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350–51 (Fed. Cir. 2008). Conroy was published on May 12, 2011. Ex. 1003, 1. Conroy refers to Conroy Protocol (Ex. 1004), stating that “[t]he protocol, including the statistical analysis plan, is available with the full text of this article at NEMJ.org.” Ex. 1003, 3. When questioned whether he has “any reason to believe that the protocol would not have been provided on NEJM.org with this text when it was published,” Dr. Oberstein testified that “if they say they provided it, then I think they probably provided it.” Ex. 1210, 165:20–166:2. 17 Alternatively, to the extent necessary, under the circumstances of this case, we waive the requirement of § 42.63(b). See 37.C.F.R. § 42.5(b). In addition, Dr. Ratain testified that “most top journals require that the protocol be submitted at the time of initial submission, and it’s always published alongside any major paper.” Ex. 2073, 42:2–5. According to Dr. Ratain, “[c]ertainly, New England Journal of Medicine does that.” Id. at 42:6–7. We credit the testimony from both Dr. Oberstein and Dr. Ratain on this issue. Accordingly, we find Exhibit 1004 was publicly accessible at the same time Conroy was published. slip op. at 28

  Patent outcomesUS 11,344,552 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,344,552
• CSPC Pharmaceutical Group Limited / CSPC Ouyi Pharmaceutical Co., Ltd. et al. v. Ipsen Biopharm Ltd.Some claims unpatentable
  PTAB · Aug 13, 2026 · IPR2025-00505 · APJ Zhenyu Yang · IPR · Final written decision

  Claims 1, 3–6, and 8–14 are unpatentable as obvious over the first § 103 combination; claims 2, 7, and 15 were not shown unpatentable because the art did not support the claimed drug sequence.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that [t]he person of ordinary skill in the art (POSA) would have been an M.D. and/or Pharm. D who would have completed training in medical oncology, particularly in the field of gastrointestinal (GI) cancers, or a Ph.D. in clinical pharmacology, pharmaceutical sciences, pharmaceutics, and/or drug delivery, also particularly in the field of GI cancers, or their equivalents, along with at least 1-2 years of post-doctoral experience. Pet. 26 (citing Ex. 1002 ¶¶ 44–46). Patent Owner states that, for purposes of this proceeding, it does not dispute Petitioner’s proposed definition of a POSA. PO Resp. 8. Based on the entirety of the trial record, we adopt Petitioner’s proposed definition of a POSA’s skill level because it is consistent with the skill level reflected in the disclosures of the ’552 patent and prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We decline to discount Dr. Oberstein’s opinion based on the alleged conflict of interest and bias. Dr. Oberstein testified that the consulting fees he receives from Patent Owner reflect a small fraction of his income. Ex. 1210, 402:21–403:9. We also agree with Patent Owner that an oncologist prescribing an FDA-approved regimen does not evince bias. See Sur-reply 23; see also Ex. 1206, 49 (showing NALIRIFOX is a category 1, NCCN-preferred first-line therapy for metastatic pancreatic cancer), 69 (explaining category 1 is based upon high-level evidence). Petitioner also contends that Dr. Oberstein “offers conclusory opinions,” “fails to properly apply the law, continues to look at each reference in isolation, refuses to acknowledge logical suggestions in the art, and imports new limitations into the claims.” Reply 3–4. We evaluate each piece of evidence, including Dr. Oberstein’s opinion, as it relates to our substantive patentability analysis, and accord it proper weight.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “In the DI, the Board stated that the ordinary understanding of a claim reciting a “method of treating metastatic adenocarcinoma of the pancreas” that comprises “administering an antineoplastic therapy to the patient” in order “to treat the metastatic adenocarcinoma of the pancreas” is that the “treatment” would have more than a de minimis therapeutic benefit or efficacy for the patient being treated. DI 14. We, however, rejected the notion that the claims “would require some particular degree of clinical efficacy” because “the level of clinical efficacy is not a claim limitation.” Id.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

    “The parties, however, disagree over whether each recited dose must be the starting dose. Petitioner argues that “claim 1 requires that the method of treatment is a first-line therapy, but does not require that the claimed doses be used as a starting dose.” Paper 51, 1. In contrast, Patent Owner argues that “[t]he specification describes that the recited dose of each drug is a ‘starting’ or ‘initial’ dose.” Paper 50, 2 (citing Ex. 1001, 13:38–45, 30:5–7). For purposes of this Decision, we do not need to resolve this dispute. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (stating that claim terms need only be construed to the extent necessary to resolve the controversy). As explained below, we agree with Petitioner that, even if claim 1 recites the starting dose for each drug, Petitioner has shown, by a preponderance of the evidence, that the prior art teaches each dose and a POSA would have had a reason to start with the recited doses. See infra Section II.G.3; Paper 51, 3 n.2. Because we find that the prior art teaches or suggests the claimed subject matter even under Patent Owner’s proposed narrower claim interpretation, we need not further construe the disputed claim language.” slip op. at 16

  Patent outcomesUS 11,344,552 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,344,552
• Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.Some claims unpatentable
  PTAB · Feb 24, 2026 · IPR2024-01203 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 1–11 are unpatentable as obvious; claim 12 was not shown unpatentable because the evidence did not establish that Froitzheim’s silver contact was formed over silicon dioxide.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art would have had (i) an advanced degree in electrical engineering, mechanical engineering, applied physics, chemistry, materials science, or a related discipline and (ii) at least one year of experience 7 Neither Petitioner nor Patent Owner raises issues of objective indicia of nonobviousness. designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Alternatively, a POSITA [i.e., a person of ordinary skill in the art] would have had (i) a bachelor’s degree in the aforementioned disciplines and (ii) at least two years of experience designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Less work experience may be compensated by a higher level of education, and vice versa.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We are persuaded that Petitioner has shown a reasonable expectation of success in the combination of Froitzheim and Gan. Petitioner explains that the combination of Froitzheim and Gan simply replaces one emitter, i.e., Froitzheim’s diffused emitter, with the polysilicon emitter of Gan. Pet. 36. According to Petitioner, a person of ordinary skill in the art would have also readily understood how to replace a diffused emitter with a polysilicon emitter and oxide layer [and] would have understood that instead of diffusing boron into the substrate’s back side as taught by Froitzheim, a [person of ordinary skill in the art] would instead follow the manufacturing technique taught by Gan. Pet. 37 (citing Ex. 1005, 246). Petitioner explains that the Gan processes are well-known and routine, and Dr. Holman states that “modifying Froitzheim in view of Gan simply involves using Gan’s known technique of a polysilicon emitter and oxide layer with Froitzheim’s known solar cell to improve Froitzheim’s solar cell in a similar way.” Pet. 37 (citing Ex. 1003 ¶ 144). For example, Petitioner directs our attention to “multiple instances” in which oxide layers and polysilicon emitters have been implemented successfully in the art. Pet. 37 (citing Ex. 1005, 246; Ex. 1006 ¶ 22; Ex. 1046, Abstr., 1121; Ex. 1003 ¶ 145). Furthermore, Gan’s statement that “cell performance can be improved if the diffused-emitter is replaced with the polysilicon emitter” and “polysilicon emitters with low J0 and ρc can be obtained with a very small fraction of interfacial oxide breakup” indicate a reasonable expectation of success. Ex. 1005, 245, 249. Gan also states that “polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells.” Ex. 1005, 249. Thus, we are persuaded that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Froitzheim and Gan.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We are not persuaded the record evidence rises to the level of a teaching away. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). And “teaching away” requires more than the mere expression of a general preference.” Galderma Labs., L.P., v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013). Notably, our reviewing court has determined that a reference can distinguish prior art in order to show the novelty of an invention without teaching away from combining the prior art with the invention disclosed in the reference. See Ricoh Co. v. Quanta Computer Inc., 550 F.3d 1325, 1332 (Fed. Cir. 2008). Here, Li prefers a “heterogeneous PN junction” and states that “a PN junction is prepared by a low-temperature deposition method, which avoids a conventional diffusion process at 800–1000°C. Such high-temperature process will cause more defects or contamination in silicon material, which will affect the improvement of cell efficiency.” Ex. 1008, 4. But, Li’s preference for lower temperature diffusion processes does not amount to a teaching away from the broader disclosure. In fact, Li acknowledges that “[t]he silicon thin film can be prepared by any deposition method,” including conventional processes at higher temperatures. Ex. 1008, 4 (emphasis added). And, while Patent Owner asserts that “[d]eposition methods are not relevant to the parties’ dispute, which is over deposition temperature” (Sur-reply 17), the deposition method employed includes its deposition temperature. See Ex. 1008, 4 (Li describing “conventional” diffusion processes at temperatures of 800–1000° C). Thus, just because Li teaches one way of depositing its silicon thin film using a low-temperature deposition method does not mean that Li teaches away from high-temperature processes. Li’s teachings do not discredit or discourage high-temperature processes in a manner that may be said to teach away.” slip op. at 51

  Patent outcomesUS 8,222,516 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,222,516
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15

  Patent outcomesUS 8,558,223 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,558,223
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Bizlink Technology, Inc. v. Anderson Power Products, Inc.Some claims unpatentable
  PTAB · Nov 7, 2025 · IPR2024-00687 · APJ Lisa L Tsang · IPR · Final written decision

  Claims 1–3 and 7–12 are unpatentable; claim 4 is not shown unpatentable because Winkler does not establish that its insulating barriers press against each other when partially disconnected.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “We agree with Patent Owner’s first argument that a level of ordinary skill in the art that encompasses an individual having experience with electrical circuits but not electrical connectors is not consistent with the technology and descriptions in the ’017 patent. See PO Resp. 7. The field of the invention of the ’017 patent is “electrical connectors, and more particularly, . . . an electrical connector that suppresses arcing if connected or disconnected while current is flowing.” Ex. 1001, 1:7–9. Consistent therewith, the challenged claims are directed to “[a]n electrical connector pair” and recite structural features of the electrical connector pair. Id. at 4:20–56, 5:1–20.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We find that the intrinsic evidence supports maintaining our construction in the Institution Decision that “insulating” means “electrically insulating.” See Dec. 11–12. In particular, we agree with Patent Owner’s argument that the insulating barriers would be unable to be configured to “block[] substantially all through-air arcing paths between the first and second electrical contacts,” as claimed, unless they were electrically insulating. See Ex. 1001, 4:36–44. Moreover, as Patent Owner avers, our interpretation of “insulating” as it applies to the first and second insulating barriers should be the same as for the first and second housings. See Digital Biometrics, 149 F.3d at 1345 (“whatever interpretation we assign [to a word used in a claim] should encompass both uses because the same word appearing in the same claim should be interpreted consistently” (citation omitted)).” slip op. at 15

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Ex. 2001 ¶ 102. Accordingly, we find Dr. Eldering’s testimony persuasive as to this issue and determine that the diagram shows what an ordinarily skilled artisan would have reasonably inferred Winkler to disclose when the connectors are partially disconnected. Compare Ex. 1004, Fig. 2, with Pet. 33; see also Ex. 1004, 3:14–27 (discussing the process by which the connectors are engaged with each other).” slip op. at 44

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Id. at 3:27–37 (emphasis added). These wall portions 58 are located between the distal ends of the terminals and where Petitioner proposes to add a printed circuit board or wiring board to Winkler. See id. at Fig. 2; Pet. 44–46 (diagrams showing Winkler as modified to have a printed circuit board or wiring board). As such, movement of Winkler’s terminals appears to be mostly limited to within their respective receiving pockets. Given the above teachings, we fail to see how Petitioner’s proposed modification would have meaningfully interfered with the degree of freedom of movement required by Winkler’s terminals. Notably, Mr. Locati’s testimony regarding this issue is conclusory. See Ex. 2001 ¶ 120. Because movement of Winkler’s terminals occurs primarily in the receiving pockets, we also do not discern how the solder joint of Petitioner’s proposed modification would experience undue stress or risk breaking due to that movement. See Ex. 1004, 1:47–55, 3:14–37, Fig. 2; Pet. 44–46. This is particularly true in view of Winkler’s teaching that each cylindrical end portion may be soldered to a cable. See id. at 2:6–10; see also Pet. 43 (arguing that Winkler teaches soldering to a cable but not specifically to a printed circuit or wiring board). Accordingly, we determine that Petitioner has shown by a preponderance of the evidence that claim 8 would have been obvious over the combined teachings of Winkler and Handbook.” slip op. at 55

  Patent outcomesUS 8,808,017 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,808,017
• Synaffix B.V. v. Hangzhou Dac Biotech Co., Ltd.Some claims unpatentable
  PTAB · Aug 26, 2025 · IPR2022-01531 · APJ Devon Zastrow Newman · IPR · Final written decision

  Claims 1–17, 20, 21, 24, 26, and 29–31 are unpatentable; claims 25 and 32–34 were not shown unpatentable, and the motion to exclude was dismissed as moot.

  RulingsFinal written decision

  • RemandOther

    “review of claims 1–17, 20, 21, 24–26, and 29–34 of the ’682 patent. Paper 2 (“Pet.”), 1, 3. Patent Owner, Hangzhou DAC Biotech Co., Ltd., filed a Preliminary Response (Paper 9, “Prelim. Resp.”). We initially determined that the information presented in the Petition did not establish a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims, and did not institute inter partes review. Paper 17. Petitioner requested Director review of our decision denying institution (Paper 18 (“Request”)). The Director delegated review of the decision to a Delegated Rehearing Panel (“DRP”). Paper 19. Patent Owner was granted the option to file a response to Petitioner’s Request (Paper 22 (“Request Resp.”)). The Delegated Review Panel vacated our decision and remanded the case to this panel with a revised claim construction for claim 1. Paper 23 (“DRP Dec.”). On August 30, 2024, we instituted an inter partes review after remand from the Director. Paper 25 (“Inst. Dec.”). Patent Owner subsequently filed a Patent Owner Response (Paper 31, “Resp.”), Petitioner filed a Reply (Paper 36, “Reply”), Patent Owner filed a Sur-reply (Paper 44, “Sur-reply”), and Petitioner filed a Sur-sur-reply (Paper 48, “Sur-sur-reply”).” slip op. at 2

  • PTAB / AIA Trials › Motions to amend / substitute claimsOther

    “I. Patent Owner’s Motion to Exclude Evidence Patent Owner moves to exclude Exhibits 1089 and 1090. Paper 50. As we did not rely on either of Exhibits 1089 or 1090 in deciding this matter, Patent Owner’s motion is dismissed as moot.” slip op. at 96

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableMixed

    “For these reasons, Patent Owner’s arguments and cited evidence also” slip op. at 31

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “function as R2, and the ethyl group may function as R4, which can be a linear alkyl having 1–6 carbon atoms. We note that claim 3 permits R5 and R6 to be absent. For these reasons, the arguments presented in the Petition demonstrate that claim 3 would have been obvious over Singh’s Compound 3 when modified in view of Harris.” slip op. at 73

  Patent outcomesUS 10,131,682 mixed
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,131,682
• Tesla, Inc. v. Autonomous Devices, LLCSome claims unpatentable
  PTAB · Jan 6, 2025 · IPR2023-01169 · APJ Barbara A Parvis · IPR · Final written decision

  Claims 1, 2, and 4–20 are unpatentable over Thomas; claim 3 is not shown unpatentable. Substitute claims 22–36 are unpatentable, and substitute claim 21 is not reached.

  RulingsFinal written decision

  • BurdenFwd mixedMixed

    “g) Conclusion—Claim 1 Based on the arguments and evidence of record, we determine that” slip op. at 28

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “g) Conclusion—Claim 1 Based on the arguments and evidence of record, we determine that” slip op. at 28

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “with the computer program 110.” Ex. 1005, 3:54–55. Thomas describes that (1) the “collected data is then stored in the database 130,” (2) the collected “data is stored in a data structure, generally referred to as a user’s profile,” and (3) the collected “data is logically linked to an event, or situation, that initiated the user’s input.” Id. at 3:56–61. Thomas describes creating or establishing a user profile by simulator 120 recording “the user’s decision/input” and storing “the user’s input in the field or sub-profile associated with the particular situation and/or event.” Id. at 4:67–5:5, Fig. 6. Patent Owner does not dispute Petitioner’s showing for element [1.3]. Also, contrary to Patent Owner’s arguments, we must consider what Thomas discloses rather than whether Thomas uses the exact claim term “instruction sets.” Cf. Gleave, 560 F.3d at 1334 (a reference does not have to satisfy an ipsis verbis test to disclose a claimed element). For these reasons, we are not persuaded by Patent Owner’s argument that Thomas does not “mention instruction sets” or “anything related to an instruction set.” PO Resp. 36–37; PO Sur-reply 17.” slip op. at 42

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, deniedDenied

    “C. Indefiniteness Petitioner argues that proposed substitute claims 22–36 are indefinite.” slip op. at 72

  Patent outcomesUS 10,607,134 mixed
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 10,607,134
• Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentable
  PTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision

  Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.

  RulingsFinal written decision

  • BurdenMixed

    “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19

  Patent outcomesUS 11,298,166 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,298,166

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.