- Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20
Patent outcomesUS 8,350,294 unpatentableClaim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 8,350,294 - PTAB · Oct 11, 2024 · IPR2024-00771 · APJ Grace Karaffa Obermann · IPR · Institution
The Board instituted IPR on claims 1–6 of the ’195 patent on all asserted grounds and granted Texas Instruments’ motion to join the Cirrus IPR.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Because the Preliminary Response in the instant case includes arguments pertaining to the sufficiency of the asserted prior art references, which were not raised in the preliminary response in the Cirrus IPR, we briefly address below the patentability of the challenged claims.” slip op. at 6
- PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner
“II. TIMELINESS OF THE PETITION UNDER 35 U.S.C. § 315(B) Pursuant to 35 U.S.C. § 315(b), “[a]n inter partes review may not be instituted if the petition requesting the proceeding is filed more than 1 year after the date on which the petitioner, real party in interest, or privy of the petitioner is served with a complaint alleging infringement of the patent.” Patent Owner argues that the Petition is untimely under 35 U.S.C. § 315(b) because Petitioner is in privity with time-barred entities. Prelim. Resp. 10– 30. However, 35 U.S.C. § 315(b) also provides that the one-year time bar “shall not apply to a request for joinder under subsection (c).” See also 37 C.F.R. § 42.122(b). Because the Petition is accompanied by a timely request for joinder (Paper 2) to the instituted proceeding (IPR2024-00017), which we grant as further discussed below, Patent Owner’s argument that the Petition is time-barred under 35 U.S.C. § 315(b) is moot, irrespective of whether Petitioner is in privity with time-barred entities.” slip op. at 5
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“B. Whether to Join Petitioner as a Party to the Cirrus IPR Joinder may be authorized when warranted, but the decision to grant joinder is discretionary. See 35 U.S.C. § 315(c); 37 C.F.R. § 42.122. A motion for joinder should (1) set forth reasons why joinder is appropriate; (2) identify any new grounds of unpatentability asserted in the petition; (3) explain what impact (if any) joinder would have on the trial schedule for the existing review; and (4) address specifically how briefing and discovery may be simplified. See, e.g., Kyocera Corp. v. Softview LLC, IPR2013- 00004, Paper 15 (PTAB April 24, 2013). As the moving party, Petitioner bears the burden of proving that it is entitled to the requested relief. 37 C.F.R. § 42.20(c). As an initial matter, we find the Motion for Joinder meets the timing requirements of 37 C.F.R. § 42.122(b) because Petitioner filed it on April 4, 2024, no later than one month after the Cirrus IPR was instituted on May 1, 2024.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“5. “Aid the Movement of Minority Carriers” Patent Owner argues that the Petition fails to show that the applied prior art references disclose the claim limitations “requiring ‘aid the movement of minority carriers,’” as twice recited in claim 1. Prelim. Resp. 8. Patent Owner summarizes this dispute as follows: The challenged patent discloses and claims a semiconductor device with (among other things) a “drift layer having a graded concentration of dopants . . . [and] further having a first static unidirectional electric drift field to aid the movement of minority carriers.”[] The Petition should not be instituted, because (among other deficiencies) it fails to show that the prior art discloses the “aid the movement of minority carriers” claim limitation. Rather than pointing to anything in the prior art that would teach this claim limitation, the Petition assumes that any “graded concentration of dopants” would necessarily “aid the movement of minority carriers.” The Petition contains no analysis explaining why the “graded concentration of dopants” in the prior art meet the “aid the movement of minority carriers” limitation, apart from the fact that they are “graded concentration of dopants.” In other words, Petitioner reads the “aid the movement of minority carriers” limitation out of the claims completely. Id. at 1–2. Patent Owner includes additional details in support of its view that the asserted prior art fails to establish obviousness of the “aid carrier movement” limitations of claim 1. Prelim. Resp. 1–10.” slip op. at 8
§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,421,195 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - Home Depot U.S.A., Inc. v. Lynk Labs, Inc.All claims unpatentablePTAB · May 22, 2023 · PGR2022-00009 · APJ Monica S Ullagaddi · PGR · Final written decision
Claims 1–5, 7–12, and 14–19 are unpatentable based on lack of written description, anticipation by Bruning, or obviousness over Bruning and Kabel.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“lighting device.” Accordingly, we determine that the level of ordinary skill in the art is “a bachelor’s degree in electrical engineering, or similar technical field, with two years of relevant experience in the field of design and/or development of LEDs and circuits,” as Petitioner proposes and that “the field of design and/or development” would be “in the context of lighting devices” as Patent Owner proposes, in which “[a]n increase in experience could compensate for less education.” Id.; Pet. 24 (citing Ex. 1002 ¶ 46).” slip op. at 15
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“theoretically fall under the “or greater” portion of the amended claim limitation “forward voltage of 6V or greater,” Applicant distinguished Colby on the basis that the 120V AC voltage from a wall outlet is not “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs.” See Ex. 1023, 9 (emphasis added). Applicant’s argument specifically identifies the claim language at issue––“forward voltage of 6V or greater”––and specifically states that it is not disclosed because Colby does not disclose the minimum voltage and instead, discloses something else, something larger–– 120V AC voltage. Accordingly, we conclude that Applicant disclaimed any voltage that is more than “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs” from the scope of “forward voltage.”” slip op. at 25
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable
“4. 35 U.S.C. § 112(a) With respect to the written description requirement, we are persuaded” slip op. at 32
- Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable
“Basis § Unpatentable Unpatentable Lack of written description, 3, 10, 17 112(a) 3, 10, 17 Lack of enablement 3, 10, 17 112(b) Indefiniteness 3, 10, 17 Lack of written description, 4, 11, 18 112(a) 4, 11, 18 Lack of enablement 4, 11, 18 112(b) indefiniteness 4, 11, 18” slip op. at 77
Patent outcomesUS 10,932,341 unpatentableClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 10,932,341 - PTAB · Nov 12, 2021 · IPR2021-00843 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on all grounds for claims 1–17, finding a reasonable likelihood that at least one challenged claim would be shown unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the parties’ arguments and evidence, and for the reasons set forth below, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing with respect to at least one challenged claim of the ’023 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’023 patent. See SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018).” slip op. at 2
- Skill levelSkill level board ownDecided for petitioner
“For purposes of this Decision, we generally accept Petitioner’s proposed definition of the person of ordinary skill in the art (or ordinarily skilled artisan), which appears to be consistent with the level of skill in the art reflected in the prior art of record and the disclosures of the ’023 patent; however, we also agree with Patent Owner that such a definition should be flexible enough to include a person with a lesser academic degree and having experience working in the field, such as an engineer with clinical experience in ophthalmic surgery, as well as a medical doctor, such as an ophthalmic surgeon with experience working with medical optics and lasers. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (noting that the appropriate level of ordinary skill in the art may be reflected in “the prior art itself”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). Such an expanded definition of the person of ordinary skill in the art, including aspects of both parties’ definitions, is appropriate based on our review of the record, which demonstrates individuals having a broad array of scientific degrees that collaborate as a team. We note, however, that our decision to institute trial in this proceeding would not change were we to adopt Patent Owner’s proposed definition.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner
“On this record, we agree with Patent Owner that the disputed preamble phrase is limiting. “[C]lear reliance on the preamble during prosecution to distinguish the claimed invention from the prior art transforms the preamble into a claim limitation because such reliance indicates use of the preamble to define, in part, the claimed invention.” Catalina Mkt’g Int’l, Inc. v. Coolsavings.com, Inc., 289 F.3d 801, 808–09 (Fed. Cir. 2002). Here, the Examiner expressly allowed the claims in view of the Examiner’s Amendment changing “scanning system” to “cataract surgery scanning system,” thereby transforming this portion of the preamble into a limitation. Ex. 1006, 13, 15, 18; see Catalina Mkt’g, 289 F.3d. at 808. Furthermore, contrary to Petitioner’s arguments, the record appears to suggest that there are structural differences between the optical systems of cataract surgery systems on the one hand and corneal surgery systems on the other. See Ex. 2006, 5:30–36; Ex. 2009, 1209–10. Thus, on this record, we are not persuaded that the language added by the Examiner represents merely an intended use for the disclosed system. In view of the foregoing, for purposes of this Decision, we construe the preamble phrase “cataract surgery scanning system” recited in independent claims 1, 8, and 12 to be limiting.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“The ’023 patent explains that a “cataract incision” is an incision created “to allow access for the lens removal instrumentation.” Ex. 1004, 10:17–19. The potential ambiguity in the claim comes, as Petitioner notes, from the fact that the cataract incision of claim 1 “only partially extend[s] through the target tissue,” which would not appear to provide immediate “access to an eye chamber of the patient’s eye.” Pet. 10; Ex. 1004, 10:19– 23, 14:15–21. Although somewhat ambiguous on its face, the prosecution history provides guidance as to how this claim phrase is to be interpreted. Phillips, 415 F.3d at 1317 (“Like the specification, the prosecution history provides evidence of how the PTO and the inventor understood the patent.”). During prosecution, the Applicants explained that the invention allows “straight cataract incisions [to be] made at the correct location,” and that partially penetrating cataract incisions are advantageous because they allow the laser delivery system to be located in an “unsterile field,” with the final penetrating incision to be made “by a physician after a patient has been moved to a sterile field.” Ex. 1006, 52–53. The Applicants then explained that despite the fact that partially penetrating cataract incisions do not fully for the lens removal instruments,” as that term is used in the ’023 patent. Id. at 52 (noting the purpose of “partially penetrating cataract incisions” is “to allow access for lens removal instruments”), 55 (“In short, none of the cited art teaches . . . to deliver the first treatment pattern to the target tissue to form partially penetrating cataract incisions – i.e. incisions that allow access for the lens removal instruments.”). The Examiner agreed with this reasoning. Id. at 15 (agreeing that the prior art did not teach or suggest partially penetrating cataract incisions that provide “access to the eye chamber of the patient’s eye”). Given these disclosures, we agree with Patent Owner that “provides access to an eye chamber of the patient’s eye” in claim 1 means that the partial incision is a starting incision, made in the appropriate shape and location, that allows complete access for lens removal instrumentation when completed, for example, by the surgeon. In view of the foregoing, we construe the claim phrase “cataract incision therein that provides access to an eye chamber of the patient’s eye, the incision . . . only partially extending through the target tissue” to require “a partially penetrating cataract incision that, when completed by the” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 9,233,023 - Ty Inc. v. Softbelly’S, Inc.All claims unpatentablePTAB · Sep 10, 2021 · IPR2020-00689 · APJ John E Schneider · IPR · Final written decision
Claims 15 and 16 are unpatentable: claim 15 as anticipated by Ogawa and obvious over Ogawa and Masahiro; claim 16 as obvious over Ogawa with Cherk, and with Masahiro and Cherk.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We have considered the arguments presented by the parties and the evidence of record and are not persuaded that our original definition of a person of ordinary skill in the art was in error. While the claims at issue refer to an optical grade fabric, we note that the fabric is not the invention. Rather, as stated in the Specification, the field of the invention is “cleaning tools for electronic display screens, and more specifically to cleaning tools for computer display screens and the like.” Ex. 1001, col. 1, ll. 4–6. The claims further narrow the field of the invention to cleaning tools in the form of a doll-like structure. Id. at col. 6, l. 37. Based on the forgoing, we continue to apply the same definition of a person of ordinary skill in the art we used in our Decision on Institution. However, the findings and conclusions set forth below would have been the same had we instead adopted Patent Owner’s proposed definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“We have considered the arguments presented by the parties and the evidence of record and conclude that Petitioner has the better position. The term “display screen,” as used in the challenged claims, refers to an intended use of the cleaning tool. As such, it does limit the scope of the claims. We begin by noting that the challenged claims are directed to a device or apparatus. Ex. 1002, col. 2, ll. 8–13. As such, the claims “cover what a device is, not what a device does.” Hewlett-Packard Co. v. Bausch & Lomb Inc., 909 F.2d 1464, 1468 (1990). The preamble of both claims 6 and 11 read in part: “doll-like figure for cleaning or wiping the surface of a display screen.” Ex. 1001, col. 6, ll. 37–38; col. 7, ll. 1–2. Both claims end with the clause “providing a pliant cleaning tool for wiping a display screen.” Id. at col. 6, ll. 50–51; col. 7, ll. 13–14. These phrases are crafted in terms of a device for performing a specific function or use. This type of phrase has been found to recite an intended use and not a physical limitation. See Marrin v. Griffin, 599 F.3d 1290, 1294–96 (Fed. Cir. 2010). The recitation of the intended use in the body of the claim does not affect our analysis. The term for wiping a display screen still recites a use of the device that does not impart a structural limitation.” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We have considered the testimony of both experts and the evidence of record and find Mrs. Ryan’s testimony to be more persuasive. Therefore, we agree with Petitioner that Ogawa discloses a wiping tool which has an inner chamber formed by a strip of optical grade fabric — the wipe portion — and a non-optical grade fabric — the gripping body. We give more weight to Mrs. Ryan’s testimony based on her extensive experience in designing plush toys. Ex. 1005 ¶¶ 3–5. Mrs. Ryan has worked in the area of plush toy design for over twenty-six years and has taught classes relating to plush toy design. Id. ¶¶ 3–4; page 40. In addition, Mrs. Ryan’s testimony regarding how one skilled in the art would envision the wiping tool of Ogawa is consistent with the evidence of record. For example, King4 teaches that teddy bears are formed by joining pieces of fabric creating an inner pocket into which stuffing is inserted. Ex. 1026, 7–12. Cockrill5 also teaches that teddy bears are traditionally made by cutting out the material, sewing the pieces together, and then stuffing the bears. Ex. 1025, 67.” slip op. at 17
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“We have considered the testimony of both experts and the evidence of record and find Mrs. Ryan’s testimony to be more persuasive. Therefore, we agree with Petitioner that Ogawa discloses a wiping tool which has an inner chamber formed by a strip of optical grade fabric — the wipe portion — and a non-optical grade fabric — the gripping body. We give more weight to Mrs. Ryan’s testimony based on her extensive experience in designing plush toys. Ex. 1005 ¶¶ 3–5. Mrs. Ryan has worked in the area of plush toy design for over twenty-six years and has taught classes relating to plush toy design. Id. ¶¶ 3–4; page 40. In addition, Mrs. Ryan’s testimony regarding how one skilled in the art would envision the wiping tool of Ogawa is consistent with the evidence of record. For example, King4 teaches that teddy bears are formed by joining pieces of fabric creating an inner pocket into which stuffing is inserted. Ex. 1026, 7–12. Cockrill5 also teaches that teddy bears are traditionally made by cutting out the material, sewing the pieces together, and then stuffing the bears. Ex. 1025, 67. Dr. Adanur’s experience and expertise appears to be primarily focused on textiles. Ex. 2005 ¶¶ 8–24. While Dr. Adanur testified that he has some experience in the area of plush toys, that experience appears to be limited to selection of fabric that could be used to manufacture plush toys and making several puppets at home to earn extra money. Ex. 1027, 52, 57–59, 78–79. In addition, Dr. Adanur does not cite to any evidence other than Ogawa to support his opinions as to what one skilled in the art would envision upon reading Ogawa. See Ex. 2005 ¶¶ 84–87. Patent Owner, however, contends that Ogawa is silent as to whether the tool has an inner chamber made from a piece of optical grade fabric and a piece of non-optical grade fabric. PO Resp. 1, 22. 4 King, Make Your Own Teddy Bears, 1985 (Ex. 1026) (“King”). 5 Cockrill, The Teddy Bear Encyclopedia, 1993 (Ex. 1025) (“Cockrill”).” slip op. at 17
Patent outcomesUS 6,195,831 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,195,831 - Cxloyalty, Inc. v. Maritz Holdings Inc.All claims unpatentablePTAB · Dec 19, 2019 · CBM2018-00037 · APJ Justin T Arbes · CBM · Final written decision
Claims 1–15 are unpatentable under § 101; the motion to amend is granted for proposed substitute claims 16–23, which were not shown unpatentable.
RulingsFinal written decision- Patent Eligibility (§101) › Alice/Mayo step one — 'directed to'Step1 directed to exceptionUnpatentable
“does not remove the claim from the realm of abstract ideas. See Pet. 52–53; Reply 12; SAP Am., Inc. v. InvestPic, LLC, 898 F.3d 1161, 1168 (Fed. Cir. 2018) (holding that it “does not matter to [the conclusion that the claim is directed to an abstract idea] whether the information here is information about real investments,” as “even if a process of collecting and analyzing information is ‘limited to particular content’ or a particular ‘source,’ that limitation does not make the collection and analysis other than abstract” (citation omitted)). Further, the last two clauses of claim 1 that recite how the transaction is viewed from the perspectives of the participant and vendor system, respectively, merely express the “non-physical result” of the information transfers and confirm the abstract nature of the claimed subject matter. See Pet. 57. In fact, as to the vendor system clause, the Specification indicates that the vendor system transfers information no differently than it would for any other transaction. See Ex. 1001, col. 7, ll. 15–18 (disclosing that vendor system 208 responds to purchase request 216 “in the same way that it would respond to any other purchase request from a consumer that presents a credit card”).” slip op. at 35
- Patent Eligibility (§101) › Alice/Mayo step two — inventive conceptStep2 no inventive conceptUnpatentable
“Our conclusion also is supported by the ’087 patent’s description of” slip op. at 41
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted
“transaction, . . . display[ing] an order message indicating the completion of the purchase transaction to the respective participant.” Mot., App’x A, 4. An example in which a judicial exception is not integrated into a practical application is when “an additional element adds insignificant extra-solution activity to the judicial exception.” Guidance, 84 Fed. Reg. at 55; Flook, 437 U.S. at 590 (holding that a step of adjusting an alarm limit variable was “post-solution activity”). Displaying an order message after the facilitated transaction has been completed amounts to insignificant post-solution activity, and does not support a conclusion that the abstract idea of claim 16 is integrated into a practical application.” slip op. at 75
- 101 substituteMixed
“transaction, . . . display[ing] an order message indicating the completion of the purchase transaction to the respective participant.” Mot., App’x A, 4. An example in which a judicial exception is not integrated into a practical application is when “an additional element adds insignificant extra-solution activity to the judicial exception.” Guidance, 84 Fed. Reg. at 55; Flook, 437 U.S. at 590 (holding that a step of adjusting an alarm limit variable was “post-solution activity”). Displaying an order message after the facilitated transaction has been completed amounts to insignificant post-solution activity, and does not support a conclusion that the abstract idea of claim 16 is integrated into a practical application.” slip op. at 75
Patent outcomesUS 7,134,087 unpatentable§ 101 eligibilitycites Alice · Mayo · Bilski · Berkheimer · EnfishPatents in suitUS 7,134,087 - Saudi Arabian Oil Company v. SK Innovation Co., Ltd.All claims unpatentablePTAB · May 9, 2019 · IPR2018-00159 · APJ Monté T Squire · IPR · Final written decision
Claim 2 was held unpatentable as anticipated by Novomer 1; the contingent motion to amend was granted, substituting claim 5.
RulingsFinal written decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Applying the standard set forth in 35 U.S.C. § 314(a), which requires demonstration of a reasonable likelihood that Petitioner would prevail with respect to at least one challenged claim, we granted Petitioner’s request and instituted an inter partes review for challenged claim 2. Paper 9 (“Institution Dec.”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner agrees with Petitioner’s assessment regarding the level of ordinary skill in the art. Mot. Amend 7. We determine the level of ordinary skill proposed by Petitioner is consistent with the ’979 patent and the asserted prior art, and we adopt that level in construing and deciding the patentability of claim 2.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In the Institution Decision, we determined that the phrase “A poly(alkylene carbonate) represented by Formula 10” did not require construction at that stage. Institution Dec. 9; see also id. at 7 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only terms which are in controversy need be construed and only to the extent necessary to resolve the controversy)). Neither party has argued post-institution that this phrase of claim 2 needs be construed. See PO Resp. 2; Pet. Reply 1–3. We conclude that no further construction of this phrase is necessary.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“In the Institution Decision, we agreed with Petitioner that the variable construction of the phrase “each independently” is the broadest reasonable interpretation in light of the specification, and construed the phrase to mean that “each variable R81, R82, R83, and R84 is independent from one instance to another throughout the polymer.” Institution Dec. 13–14. Based on that construction, we also determined in the Institution Decision that claim 2 encompasses the following genera: (1) “Genus A,” which includes a poly(ethylene glycol) chain transfer agent flanked by poly(ethylene carbonate) chains (Pet. 24); (2) “Genus B,” which includes a poly(propylene glycol) chain transfer agent flanked by poly(propylene carbonate) chains (id. at 25–26); (3) “Genus C,” which includes a poly(propylene glycol) chain transfer agent flanked by poly(ethylene carbonate) chains (id. at 26); and (4) “Genus D,” which includes a poly(ethylene glycol) chain transfer agent flanked by poly(propylene carbonate) chains (id. at 27). Institution Dec. 12–13. Neither party opposes adopting the variable construction of the phrase “each independently” and the determination that, under the variable construction, claim 2 encompasses Genus A, Genus B, Genus C, and Genus D. PO Resp. 2; Pet. Reply 1–3. We maintain the variable construction of the phrase “each independently” on the complete record.” slip op. at 11
Patent outcomesUS 9,023,979 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,023,979 - Fujifilm Corporation v. Sony CorporationSome claims unpatentablePTAB · Nov 7, 2018 · IPR2017-01268 · APJ Jo-Anne M Kokoski · IPR · Final written decision
Claims 15 and 17 are unpatentable as anticipated by Ishikawa; the petitioner did not show claims 1–11, 16, and 18–20 unpatentable over Aonuma or Aonuma and Abe.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) at the time of the ’774 patent would have had “a bachelor’s degree in materials science, electrical engineering, mechanical engineering, chemistry, or a closely related field, and at least five years of experience” in industry or academic research relating to magnetic tape, or “a master’s degree or higher” in the same fields and at least three years of experience relating to magnetic tape. Pet. 13 (citing Ex. 1003 ¶ 65; Ex. 1018 ¶ 60). Patent Owner does not dispute Petitioner’s assessment in its Response, and Dr. Talke agrees that it “is reasonable.” Ex. 2026 ¶¶ 25–26. Petitioner’s assessment appears consistent with the level of ordinary skill in the art at the time of the invention as reflected in the prior art in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Accordingly, we adopt Petitioner’s assessment of the level of ordinary skill in the art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“the broadest reasonable construction, claim terms are presumed to have their ordinary and customary meaning as understood by a person of ordinary skill in the art in the context of the entire patent disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For the purposes of the Decision on Institution, we determined that, based on the record at that time, no claim term required express construction (Dec. on Inst. 7), and we see no reason to modify that determination in light of the record developed during trial. C.” slip op. at 9
- Expert testimonyPetitioner expert creditedMixed
“considerably greater than Ishikawa’s stylus load of 50–300 μN (Ex. 1015 ¶ 45). The Talke Declaration does not address this discrepancy, and Dr. Talke stated during his deposition that reducing the stylus load would reduce scratching of the magnetic tape surface. Ex. 1030, 108:14–19 (“Q: Would reducing the contact pressure for the stylus instrument reduce the scratching of the magnetic tape surface by the stylus? A: Yes, it would, but you have to remember the other problem is the diameter and size of the stylus.”). Moreover, Petitioner provides evidence that it was not uncommon to use stylus-type profilometers to measure the properties of magnetic tape, even after Bhushan was published in 1996. See Reply 6. In particular, Petitioner points to Saliba,6 which describes using a stylus-type profilometer, under identical conditions to those used in Ishikawa, to measure the surface characteristics (including peak-to-valley roughness) of the backcoating of magnetic tape. Ex. 1027, 7:28–40, 57–60. Petitioner further points to Ohno,7 which also describes using “a stylus type 3D profilometer in accordance with JIS B0601” to measure the surface roughness characteristics of magnetic tape. Ex. 1028 ¶ 36; see also Ex. 1015 ¶ 45 (Ishikawa explaining that surface roughness characteristics were measured “in accordance with JIS-B0601-1994”); Ex. 1027, 7:28–39 (Saliba explaining that surface roughness characteristics where measured “in accordance with JIS-B0601-1994”). Accordingly, we are persuaded that the 6 US Patent No. 6,558,774 B1, issued May 6, 2003 (Ex. 1027). 7 U.S. Patent App. Pub. No. US 2005/0175866 A1, published Aug. 11, 2005 (Ex. 1028). evidence establishes that a stylus-type profilometer is a suitable device for measuring the surface characteristics of magnetic tape.” slip op. at 19
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We agree with Petitioner that Ishikawa teaches “peak-to-valley roughness less than about 325 nm” as recited in claim 15. Pet. 24–25; Reply 5–8; Ex. 1003 ¶ 216. In particular, Ishikawa teaches a backcoating layer of a magnetic tape that has a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm.” Ex. 1015 ¶ 44. Ishikawa provides five example embodiments of its magnetic tape, and reports the measurements of a number of characteristics of the backcoat layer for each example, including peak-to-valley roughness Rz. Id. ¶¶ 120–134, Table 1. Ishikawa discloses that peak-to-valley roughness Rz was measured using a stylus-type profilometer under the following conditions: Stylus: diameter: 1.5 to 2.5 μm; curvature: 60º Contact pressure: 50 to 300 μN Cut-off length: 80 μm Sampling length: 80 μm Assessment length: 400 μm Id. ¶¶ 45, 49. The reported peak-to-valley roughness Rz values for the five examples ranged from 58 to 87 nm, as shown in the annotated portion of Ishikawa Table 1 from the Petition, reproduced below: Pet. 24 (citing Ex. 1015, Table 1). The annotated portion of Ishikawa Table 1 shows the results for the measured characteristics of the backcoat layer of Examples 1–5, with the peak-to-valley roughness Rz values highlighted by a red box. Id. Because Ishikawa teaches that the backcoating layer of its magnetic tape should have a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm,” and because Ishikawa presents examples of magnetic tape with backside surfaces having a peak-to-valley roughness of 87 nm or less, Ishikawa discloses “a peak-to-valley roughness less than about 325 nm” as recited in claim 15.” slip op. at 16
Patent outcomesUS 7,029,774 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,029,774 - Old Republic General Insurance Group, Inc. / Old Republic Insurance Company et al. v. Intellectual Ventures II LLCSome claims unpatentablePTAB · Apr 12, 2017 · IPR2015-01992 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1, 2, 4–12, 14–24, and 34–48 are unpatentable over the stated grounds; claims 3 and 13 were not shown unpatentable, and claims 25–33 and 49 were disclaimed.
RulingsFinal written decision- Adverse judgmentAdverse judgmentOther
“On February 8, 2017, Patent Owner informed the Board that it had “disclaimed claims 25–33 and 49” of the ’002 patent, thereby “rendering the institution of claims 25–33 and 49 in the subject inter partes review proceeding moot.” Paper 18, 1; Ex. 2005 (disclaimer of claims 25–33 and 49 pursuant to 37 C.F.R. § 1.321(a)).” slip op. at 2
- BurdenMixed
“2. Analysis To anticipate a claim a “prior art reference must disclose each and every feature of the claimed invention, either explicitly or inherently.” Eli Lilly & Co. v. Zenith Goldline Pharm., 471 F.3d 1369, 1375–76 (Fed. Cir. 2006). An inherent disclosure may be found when an asserted prior art reference “necessarily” includes the unstated limitation. Transclean Corp. v. Bridgewood Servs., Inc., 290 F.3d 1364, 1373 (Fed. Cir. 2002).” slip op. at 13
- ExcludeMotion to exclude, deniedDenied
“Upon review of Petitioner’s arguments and supporting evidence, we are persuaded that Petitioner has identified where each limitation of independent claim 1 is disclosed in Huang. Claims 11, 34, and 40 contain limitations similar to claim 1, Petitioner provides detailed arguments as to where each limitation of these claims is disclosed in Huang, and Patent Owner does not present any arguments for these claims separate from those 7 At oral argument, Patent Owner asserted that we should not consider Petitioner’s argument that the icons of Huang contain URL information because this argument was presented for the first time in Petitioner’s Reply. Tr. 32:19–35:5. Patent Owner did not file a motion to exclude this evidence, however, or request a sur-reply to address any allegedly new issues raised for the first time in Petitioner’s Reply. Id. at 34:18–23. Nor is it evident why Petitioner’s arguments are not appropriate rebuttal arguments addressing Patent Owner’s proposed construction of “pointer.” Accordingly, we decline to exclude Petitioner’s URL arguments and evidence.” slip op. at 15
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“be used in conjunction with the mobile interface agent, including “a computer, cable set top box, cellular phone, or other device.” Ex. 1001, 4:44–45. Patent Owner does not explain why the description of a “pointer” in one “context,” i.e., on a computer or PDA, represents a clear and deliberate attempt to define the term in all contexts, such that all pointers must be a “reference” to “a type of menu item” and be “accessible on a computer, PDA, or server.” See In re Paulsen, 30 F.3d at 1480 (noting that an inventor is “free to define the specific terms used to describe his or her invention,” but “this must be done with reasonable clarity, deliberateness, and precision”). The broadest definition of the term “pointer” in the ’002 patent is “a link/shortcut to an item.” Ex. 1001, 10:8–10 (“As discussed above, a pointer is a link/shortcut to an item such as . . . .”); Dec. on Inst. 10. This definition is consistent with the description of “pointers” in the ’002 patent written description and claims. Ex. 1001, 20:4–6 (“wherein the pointers provide links to access the corresponding user specific resources and information.”). Accordingly, we construe “pointer” to mean “a link or shortcut to an item.”” slip op. at 9
Patent outcomesUS 6,546,002 mixedClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 6,546,002
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.