- LG Energy Solution, Ltd. v. Molecular Rebar Design, LLCAdverse judgmentPTAB · Sep 2, 2025 · IPR2024-01005 · APJ Avelyn Ross · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner, terminated review of claims 1–23, and cancelled the scheduled hearing after Patent Owner disclaimed all challenged claims.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Under our rules, a party may request adverse judgment against itself at any time during a proceeding, and we construe a disclaimer of all claims involved in a trial as a request for adverse judgment. 37 C.F.R. §42.73(b). Because Patent Owner has disclaimed all challenged claims, and has requested adverse judgment, we determine that it is appropriate to enter adverse judgment against Patent Owner pursuant to 37 C.F.R. § 42.73(b) and to terminate this proceeding. Under these circumstances, we grant Patent Owner’s Motion, and” slip op. at 2
NonePatents in suitUS 9,636,649 - PTAB · Aug 11, 2025 · IPR2025-00560 · APJ Barry L Grossman · IPR · Institution
The Board instituted IPR on claims 1–29 and every asserted ground, finding a reasonable likelihood that claim 1 is unpatentable over Chang and Fang.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The Board determines whether to institute a trial on behalf of the Director. 37 C.F.R. § 42.4(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art would have had “bachelor’s degree in mechanical engineering or a similar field and at least two years of experience designing human breast pump equipment. More education could substitute for experience and vice versa.” Pet. 8 (citing Ex. 1003 ¶¶ 15–18). Mr. Bauer’s Declaration testimony states he considered some of the factors listed above. Ex. 1003 ¶ 17. Mr. Bauer testifies that based on his background and experience, in his opinion, the level of ordinary skill is as stated by Petitioner. Id. at 18. For purposes of this Decision, based on the prior art, the sophistication of the disclosed technology in the ’381 patent, and Mr. Bauer’s undisputed testimony, we adopt Petitioner’s definition of the level of ordinary skill.13” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We do not perceive the need to construe any claim limitation. Claims must be construed “only to the extent necessary to resolve the controversy.” AstraZeneca AB v. Mylan Pharms. Inc., 19 F.4th 1325, 1345 (Fed. Cir. 2021) (quoting Vivid Techs., Inc. v. American Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because binding. We wish to have the record developed before rendering any binding determination, finding, or conclusion. 14 The citation to Ex. 1005, 2290 appears to be an error. We do not find the cited claim construction at this location. we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe the claim preambles here where the construction is not ‘material to the [obviousness] dispute.’” (citations omitted)).” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Petitioner also asserts that “[m]ultiple reasons would have prompted a POSITA to implement a diaphragm pump in Chang’s breast pump device in accordance with Fang’s suggestions.” Id. at 21–24. Based on the record before us, we agree that Fang discloses a diaphragm, as recited in clause 1[a][1]. We also agree, based on the record before us, that a person of ordinary skill would have had multiple reasons to use Fang’s diaphragm pump in Chang’s device with a reasonable expectation of success.” slip op. at 21
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,813,381 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Molecular Rebar Design, LLCInstitutedPTAB · Jul 17, 2025 · IPR2025-00359 · APJ Avelyn M Ross · IPR · Institution
The Board instituted review of claims 1–4 and 7–17 on all petition grounds and granted Samsung’s unopposed motion for joinder in IPR2024-01013.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We instituted review of claims 1–4 and 7–18 of the ’483 patent in IPR2024- 01013 after a review of all arguments and evidence presented by the parties, including Patent Owner’s arguments in its preliminary response. For the reasons discussed in the Institution Decision in IPR2024-01013, we determine that Petitioner demonstrates a reasonable likelihood of showing at least one claim of the ’483 patent is unpatentable. Thus, we find that the Petition warrants institution of inter partes review on all claims and grounds set forth in the Petition.” slip op. at 8
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Upon consideration of Petitioner’s arguments, we are persuaded that it is appropriate under these circumstances to join Petitioner to the proceeding in IPR2024-01013. Petitioner’s agreement to accept an “understudy” role and to not actively participate in IPR2024-01013 unless the current petitioner ceases to participate will limit any potential impact on the trial schedule and will avoid increasing the costs or complexity of the proceeding. Therefore, joinder of Petitioner to IPR2025-00359 will further the goals of a just, speedy, and inexpensive resolution of Petitioner’s challenge. 37 C.F.R. § 42.1(b).” slip op. at 10
Nonecites Phillips · KSR · GrahamPatents in suitUS 10,153,483 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Molecular Rebar Design, LLCInstitutedPTAB · Jul 17, 2025 · IPR2025-00358 · APJ Julia Heaney · IPR · Institution
The Board instituted review of claims 1–16 on all petition grounds and granted Samsung’s motion to join IPR2024-01012 as an understudy petitioner.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A. Whether the Petition Warrants Institution As we note above, the Petition challenges the same claims on the same grounds of unpatentability, and relies on the same evidence, including the same declarant testimony, as presented in the 1012 IPR. Pet. 1; Mot. 6– 7. In other words, the Petition is virtually identical to the petition filed in the 1012 IPR. We incorporate our analysis from the 1012 IPR regarding the asserted grounds of unpatentability and determine that Petitioner has demonstrated sufficiently under 35 U.S.C. § 315(c) that institution of an inter partes review is warranted under 35 U.S.C. § 314(a).” slip op. at 4
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Based on the facts and circumstances discussed above, we determine Petitioner has established good cause for joining the 1012 IPR. Specifically, we find that joining Petitioner to the 1012 IPR is unlikely to require any delay or modification to the scheduling order already in place for the 1012 IPR. We also determine that Patent Owner will not be prejudiced unduly by the joinder of this proceeding. Thus, we determine that granting the Motion for Joinder under these circumstances would help “secure the just, speedy, and inexpensive resolution” of these proceedings. See 37 C.F.R. § 42.1(b). For the above reasons, we grant Petitioner’s Motion for Joinder and join Petitioner as a party to the 1012 IPR.” slip op. at 6
NonePatents in suitUS 10,608,282 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Molecular Rebar Design, LLCInstitutedPTAB · Jul 17, 2025 · IPR2025-00355 · APJ Julia Heaney · IPR · Institution
The Board instituted inter partes review of claims 1–23 on the petition’s grounds and granted Samsung’s motion to join the LGES IPR in an understudy role.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A. Whether the Petition Warrants Institution As we note above, the Petition challenges the same claims on the same grounds of unpatentability, and relies on the same evidence, including the same declarant testimony, as presented in the 1005 IPR. Pet. 1; Mot. 5. In other words, the Petition is virtually identical to the petition filed in the 1005 IPR. We incorporate our analysis from the 1005 IPR regarding the asserted grounds of unpatentability and determine that Petitioner has demonstrated sufficiently under 35 U.S.C. § 315(c) that institution of an inter partes review is warranted under 35 U.S.C. § 314(a).” slip op. at 4
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Based on the facts and circumstances discussed above, we determine Petitioner has established good cause for joining the 1005 IPR. Specifically, we find that joining Petitioner to the 1005 IPR is unlikely to require any delay or modification to the scheduling order already in place for the 1005 IPR. We also determine that Patent Owner will not be prejudiced unduly by the joinder of this proceeding. Thus, we determine that granting the Motion for Joinder under these circumstances would help “secure the just, speedy, and inexpensive resolution” of these proceedings. See 37 C.F.R. § 42.1(b). For the above reasons, we grant Petitioner’s Motion for Joinder and join Petitioner as a party to the 1005 IPR.” slip op. at 6
NonePatents in suitUS 9,636,649 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Molecular Rebar Design, LLCInstitutedPTAB · Jul 17, 2025 · IPR2025-00356 · APJ Grace Karaffa Obermann · IPR · Institution
The Board instituted review of claims 1–8 on all petition grounds and granted Samsung’s unopposed motion to join IPR2024-01006.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We agree with the parties that the Samsung Petition “involves the same patent, challenges the same claims, relies on the same expert declaration, and is based on the same grounds and combinations of prior art.” Id. (Patent Owner’s admission); see Mot. 3 (Petitioner, averring that the Samsung Petition and the Petition filed in IPR1006 are “substantively identical”). Under these circumstances, our reasons for instituting review based on LG Energy Solution’s Petition apply with equal force to the “substantively identical” Samsung Petition. Id. Accordingly, for the same reasons set forth in the Institution Decision filed in IPR1006, we institute review on all claims and all grounds asserted in the Samsung Petition. See generally IPR1006, Paper 8 (Institution Decision in IPR1006).” slip op. at 3
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“(1) the Motion for Joinder is timely, having been “filed within one month of the institution decision” in IPR1006; (2) the Samsung Petition “is substantially identical to the” Petition filed in IPR1006; (3) “joinder will have minimal, if any, impact on the trial schedule, as all issues are substantively identical”; (4) Petitioner agrees to “accept an ‘understudy role’” in the joined proceeding, unless LG Energy Solution, Ltd. “is terminated from” IPR1006; and (4) joinder will simplify “briefing and discovery” as all issues will be resolved “in a single proceeding.” Mot. 3–4. Patent Owner contests none of those facts. To the contrary, Patent Owner does “not oppose” the Motion for Joinder and “fully expects this proceeding to be joined with” IPR1006. Waiver 1. Having considered Petitioner’s Motion for Joinder, as well as Patent Owner’s Waiver, we determine that joinder of the instant proceeding with IPR1006 is appropriate. Accordingly, we grant Petitioner’s unopposed Motion for Joinder, subject to the requirements set forth in the Order below.” slip op. at 4
NonePatents in suitUS 8,808,909 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Molecular Rebar Design, LLCInstitutedPTAB · Jul 17, 2025 · IPR2025-00357 · APJ Grace Karaffa Obermann · IPR · Institution
The Board instituted review of claims 1–5 on all grounds in the Petition and granted Samsung’s unopposed motion to join IPR2024-01011.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We agree with the parties that the Samsung Petition “involves the same patent, challenges the same claims, relies on the same expert declaration, and is based on the same grounds and combinations of prior art.” Id. (Patent Owner’s admission); see Mot. 3 (Petitioner, averring that the Samsung Petition and the Petition filed in IPR1011 are “substantively identical”). Under these circumstances, our reasons for instituting review based on LG Energy Solution’s Petition apply with equal force to the “substantively identical” Samsung Petition. Id. Accordingly, for the same reasons set forth in the Institution Decision filed in IPR1011, we institute review on all claims and all grounds asserted in the Samsung Petition. See generally IPR1011, Paper 9 (Institution Decision in IPR1011).” slip op. at 3
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“Having considered Petitioner’s Motion for Joinder, as well as Patent Owner’s Waiver, we determine that joinder of the instant proceeding with IPR1011 is appropriate. Accordingly, we grant Petitioner’s unopposed Motion for Joinder, subject to the requirements set forth in the Order below.” slip op. at 4
NonePatents in suitUS 8,968,924 - Bio-Rad Laboratories, Inc. v. California Institute Of TechnologyRehearing deniedPTAB · May 22, 2025 · IPR2024-01178 · APJ Cynthia M Hardman · IPR · Rehearing
The Board denied Bio-Rad’s rehearing request, leaving institution denied because the petition relied on Saxonov material not shown to be prior art and could not be supplemented on rehearing.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Such an approach is inconsistent with the Supreme Court’s statements that in an inter partes review, “the petitioner is master of its complaint,” and “the petition [is] the centerpiece of the proceeding.” SAS Inst., Inc. v. Iancu, 584 U.S. 357, 363, 369 (2020). “It is of the utmost importance that petitioners in IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). In contravention of these principles, Petitioner’s approach improperly shifts the onus to Patent Owner or the Board to identify and parse out erroneous, and purportedly non-essential, citations to Saxonov and piece together an argument based on the remaining citations. As we stated in the Decision, we decline to assume this task. See Dec. 20. Finally, in the Request, Petitioner attempts to “show[] how Ground 6 is fully supported by undisputed prior art material.” Req. 6. This attempt is improper. Petitioner cannot use the Request as a means to supplement the Petition to identify purportedly essential citations and disavow erroneous or non-essential citations.” slip op. at 6
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“In the Decision, we determined that Petitioner had not shown that all of the portions of Saxonov that Petitioner relied on in its unpatentability arguments qualify as prior art to the challenged claims. See Dec. 17–24. On this basis, we found that Petitioner failed to demonstrate a reasonable likelihood that it would prevail in showing the unpatentability of at least one challenged claim of the ’170 patent.” slip op. at 2
NonePatents in suitUS 10,770,170 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.Some claims unpatentablePTAB · May 16, 2025 · IPR2024-00094 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1 and 3–5 are unpatentable over Kobayashi and Hshieh; claims 2 and 6 were not shown unpatentable over the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”), “at the filing date of the ’409 [p]atent[,] would have a master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶ 52). Patent Owner does not dispute Petitioner’s proffered level of ordinary skill in the art. PO Resp. 9 (citing Ex. 2021 ¶ 55). We adopt Petitioner’s proffered level of ordinary skill in the art, which is supported by unopposed declaration testimony and consistent with the ’409 patent and prior art of record. See, e.g., Ex. 1001, 1:6–3:8 (describing the invention and related art in terms of integrated circuit design and fabrication). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“Based on the arguments and evidence, we disagree with Petitioner’s proposed construction requiring the corners to be rounded via a particular process, because doing so would improperly import a process of manufacture from the Specification into apparatus claims. See Cont’l Circuits LLC v. Intel Corp., 915 F.3d 788, 799 (Fed. Cir. 2019) (explaining that, generally, a novel product that meets the criteria of patentability is not limited to the process by which it was made, however, process steps can be treated as part of a product claim if the patentee has made clear that the process steps are an essential part of the claimed invention). Here, the portions of the Specification relied on by Petitioner (Ex. 1001, 2:10–20, 4:53–64) disclose a process for manufacturing but do not make clear that the process is an essential part of the claimed invention. We also disagree with Petitioner’s assessment of the prosecution history, i.e., that the claims were amended to distinguish the claimed rounded corners from Pfirsch’s rounded corners, which, presumably, are formed as an incidental result of lithography. On the contrary, the Examiner found (and Patent Owner acknowledged) that Pfirsch has rounded corners. Ex. 1002, 276, 295, 302. As Patent Owner correctly points out, the claims were amended during prosecution to include a “circular” contact to distinguish over Pfirsch’s square contact. See id. Petitioner does not otherwise point to evidence that Patent Owner clearly and unmistakably limited the claim scope to rounded corners formed by a particular process.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“is ‘known’ is not sufficient for a motivation to combine.” PO Resp. 47. However, the motivation-to-combine analysis is a flexible one, and the “known-technique” rationale is adequate to show a motivation to combine. For example, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417; see also Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023) (quoting Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 799–800 (Fed. Cir. 2021) (“If there’s a known technique to address a known problem using ‘prior art elements according to their established functions,’ then there is a motivation to combine.”). Here, as discussed above, the record shows that top view rounding was a known technique to eliminate corners, and that corners were a known problem (e.g., corners tend to reach undesirable higher peak electric field leading to premature breakdown voltage). See, e.g., Ex. 1003 ¶¶ 37, 39, 42– 44, 55–57, 122, 133, 135–141; Ex. 1005, 7:57–8:4; Ex. 1006, 1:18–21, 2:19–39, 5:3–17, Figs. 6A–8B; Ex. 1011, 1:29–41; Ex. 1012; PO Resp. 13, 46 (citing Ex. 1011, 1:34–40); Ex. 2021 ¶ 87. Furthermore, there is no dispute that modifying Kobayashi to eliminate corners via top view rounding was anything more than a “minor and commonplace modification” of cell shape within the skill of an ordinary artisan, or that top view rounding would change Kobayashi’s established function. Pet. 60; Ex. 2021 ¶ 86.” slip op. at 30
- Obviousness (§103) › KSR rationalesMotivation foundUnpatentable
“We agree that Kobayashi’ s Figure 5A solely cannot be relied upon as disclosing the claimed diameter. See Hockerson-Halbertstadt, Inc. v. Avia Group Int'l, 222 F.3d 951, 956 (Fed. Cir. 2000) (patent drawings not designated as being drawn to scale cannot be relied upon to define precise proportions of elements if the specification is completely silent on the issue). However, we do not agree that Petitioner failed to show Kobayashi suggests the recited diameter. We disagree with Patent Owner’s assertion that Dr. Liu’s “vague, purported ‘design considerations’” are “unsupported.” PO Resp. 43. Although Kobayashi is silent on the width/diameter of the trench contact in Figure 5A, Kobayashi discloses trenched gates having dimensions below 0.5 μm, which demonstrates that it was known in the art, and required no more than an exercise of ordinary skill in the art, to create trenched features of widths well below 1 μm. Kobayashi also discloses that the width of each trench, and the distance between the adjacent trenches (which includes the trench contact), must be selected to optimum sizes . . . [and] these sizes . . . have some degrees of freedom.” Ex. 1005, 7:42–48. This demonstrates a POSITA would seek to optimize trench contact width or diameter. Dr. Liu’s testimony regarding design considerations suggests the desirability of a reduced diameter trench contact, e.g., to minimize the width of the trench contact for purposes of easier filling, to minimize the total width of the unit cell, and to minimize manufacturing time by reducing etch back time. See Ex. 1003 ¶¶ 111–114. As Patent Owner acknowledges, “there is always a motivation to speed up the fabrication process or shrink feature sizes of semiconductors.” PO Resp. 43 (citing 2021 ¶ 131). However, contrary to Patent Owner’s arguments, these are not generic motivations “untethered” from Kobayashi. Id. Indeed, Kobayashi directly addresses the fabrication process (including new techniques to obtain trench widths under 0.5 μm) and the need to optimize the size of trench gates and the space in between (which includes the trench contact). Ex. 1005, 7:43–54, 7:19–9:53. Patent Owner also argues that Petitioner presents no evidence that modifying Kobayashi to have a diameter smaller than 1 μm is predictable. PO Resp. 44. We disagree. As discussed above, Petitioner points to Kobayashi’s teachings that the sizes are to be optimized and that the trench gate width is smaller than 0.5 μm, which suggests making other trench features of that width was within ordinary skill. Ex. 1003 ¶ 112. Furthermore, Kobayashi’s silence as to the dimensions of the trench contact suggests that the trench contact diameter dimension is likely in the ballpark of the other explicitly disclosed trenched feature dimensions and is a matter of routine optimization. In addition, Patent Owner advances no persuasive evidence that the claimed diameter produces unexpected results or is otherwise critical. Patent Owner also argues that reducing trench contact diameter has downsides (i.e., reduced ease of filling for metal plugs and reduced current carrying capacity) not addressed by Petitioner; however, Petitioner is not required to address those tradeoffs in its Petition, and we do not see how those tradeoffs would prevent the proposed combination. PO Resp. 44; see Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006) (“a given course of action often has simultaneous advantages and disadvantages, and this does not necessarily obviate motivation to combine.”); Winner Int'l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”). Here, Dr. Liu listed numerous benefits of having a reduced diameter, which weigh against the potential downsides raised by Patent Owner. Ex. 1003 ¶¶ 111–114. Moreover, we do not see how the downsides/tradeoffs prevent modifying Kobayashi in the manner suggested when the same tradeoffs appear to be applicable to the ’409 patent. Having considered Patent Owner’s arguments, and taking into” slip op. at 43
Patent outcomesUS 7,812,409 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,812,409 - Inergy Technology, Inc. v. Force Mos Technology Co., Ltd.No claims unpatentablePTAB · May 16, 2025 · IPR2024-00093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–9 were not proven unpatentable because the asserted references did not establish the claimed epitaxial layer or the required coverage of the trench sidewalls.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner defines a person of ordinary skill in the art as having “a Master’s degree in electrical engineering, and at least two years of relevant work experience in the field of integrated circuit design and manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 32–37, 57). Patent Owner does not dispute Petitioner’s definition. PO Resp. 6. We adopt Petitioner’s proposed definition of the level of ordinary skill in the art because it is supported by unopposed declaration testimony and appears to be consistent with the disclosures of the ’634 patent and the asserted prior art references. See Ex. 1001, 1:6–2:33 (describing the invention and related art in terms of integrated circuit design and fabrication); see also Ex. 1006 ¶¶ 1–6 (Hirler); Ex. 1008 ¶¶ 1–37 (Kobayashi); Ex. 1009 ¶¶ 2–29 (Shiraishi). Neither party, moreover, indicates the overall result would change based on a different definition.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that “the sidewalls of said trenches in said base layer are covered” should be construed to mean that “the entire sidewalls of” those trenches are covered. Pet. 18–19. We refer to this as “the sidewall limitation.” Petitioner shows persuasively that the disclosure and file history of the ’634 patent support its position on the sidewall limitation. Id. Patent Owner, for its part, observes that, after the filing of the Petition. two District Courts adopted the construction proposed by Petitioner.” PO Resp. 21 (citing Ex. 2010, 6–9; Ex. 2011, 23). Patent Owner also agrees to apply Petitioner’s construction for purposes of this proceeding. Id. We agree with Patent Owner that an express construction of the sidewall limitation is necessary to this Decision, id., and adopt Petitioner’s undisputed definition because it is supported by the record. No other claim term requires express construction for purposes of this Decision.” slip op. at 8
- BurdenNot shown unpatentable
“On this record, Petitioner fails to demonstrate that any claim is unpatentable under any ground asserted in the Petition. IV. CONCLUSION For the above reasons, we determine that Petitioner fails to establish by a preponderance of the evidence that claims 1–9 of the ’634 patent are unpatentable.” slip op. at 34
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“Alternatively, even if we set aside that timing issue, Dr. Liu’s bare opinion, advanced for the first time during cross-examination, that an epitaxial layer is “obvious” from Hirler’s disclosure is inadequate to support the challenges. Id. at 24–25. We accord little weight to Dr. Liu’s opinion because it is conclusory. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In any event, Petitioner does not meet, on this record, the “high standard” required to establish an inherent disclosure of an epitaxial layer in Hirler. PO Resp. 24.6 Dr. Liu opined for the first time during cross-examination “that it would have been impossible to create Hirler’s more lightly doped n- drift zone layer on top of its more heavily doped n+ substrate layer other than via epitaxy.” Id. at 25 (citing Ex. 2014, 164:16– 165:20). But Patent Owner effectively refutes that proposition with evidence that such a layer “could be created by counter-doping,” even if, as Dr. Liu contends, counter-doping may have been less ideal due to “disadvantageous mobility.” Id. (citing Ex. 2012 ¶ 133; Ex. 2014, 166:15–167:8).” slip op. at 11
Patent outcomesUS 7,629,634 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,629,634
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.