- PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - PTAB · Nov 14, 2016 · IPR2015-01243 · APJ Grace Karaffa Obermann · IPR · Final written decision
Petitioner failed to prove claims 1–8, 10, and 11 of the ’290 patent, claims 1–8 and 10–13 of the ’173 patent, and claims 1–6 and 8–19 of the ’510 patent obvious over Fohr, Sato, and …
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“We recognize that it may be necessary “to look to interrelated teachings of multiple patents . . . in order to determine whether there was an apparent reason to combine the known elements in the fashion claimed.” KSR Int’l, 550 U.S. at 418. Petitioner in these proceedings, however, directs us to no persuasive reason why an ordinary artisan would have turned to the heat-retaining battery module of Hallaj when working to implement a plurality of Sato’s cells in a pack to replace the capacitors in Fohr. Pet. 36–38 (nowhere addressing that critical point); Reply 13 (devoting four sentences to rebuttal of Patent Owner’s persuasive evidence that one would not have combined the disclosures of Hallaj, Fohr, and Sato in the manner claimed); see Ex. 1033, 15 (Examiner’s observation, in confirming the patentability of the challenged claims during reexamination, that Sato contains “no information as to how Sato’s cells would be implemented in a pack”). We view Petitioner’s unexplained leap from the single battery cell of Sato to the heat-retaining battery module of Hallaj as a classic example of impermissible hindsight reconstruction driven not by any teaching in the prior art, but by the claim requirement of a “plurality” of cells implemented in a battery pack. Pet. 36–38; Reply 13. Patent Owner, by contrast, comes forward with persuasive evidence, which we credit, showing that one of ordinary skill in the art would not have been led to arrange a plurality of Sato’s cells in the heat-retaining battery module of Hallaj because such a modified battery pack would have been unsuitable for use as a replacement for the capacitors in Fohr. Specifically, we credit the testimony of Dr. Blomgren, who cogently explains why a person of ordinary skill in the art would not have been led to the proposed modification. Ex. 2147 ¶¶ 79–85.” slip op. at 17
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We are not persuaded by Dr. Riley’s testimony that Fohr effectively teaches that both lithium-based battery cells and capacitors can achieve the 20 Amp Limitation, on a theory that “it’s actually the tool that draws the power” and “the right lithium cell” would be “a drop in replacement for this application.” Ex. 2169, 121:12–16 (Dr. Riley’s deposition testimony); Resp. 17. Dr. Riley readily admitted an unfamiliarity with capacitors, and identified no suitable “drop in” ready lithium cells available at the time of the invention. Ex. 2169, 121:11–122:4 (“[I]f I had a cell that could do similar things, I’d certainly swap it in there.”). On that point, we find more credible Dr. Blomgren’s testimony that “there is no guarantee that a given pack of battery cells can provide the current that a tool tries to draw.” Resp. 17 (citing Ex. 2147 ¶ 60).” slip op. at 13
- Skill levelSkill level board ownOther
“B. Level of Ordinary Skill in the Art We hold that the prior art references asserted in the Petition are representative of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (absence of specific findings on “level of skill in the art does not give rise to reversible error ‘where the prior art itself reflects an appropriate level and a need for testimony is not shown’” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). To the extent that a more specific definition is required, we hold that an ordinary artisan would include one holding a Bachelor’s Degree in Electrical Engineering with two or three years of experience in battery design. That definition comports with the very similar definitions advanced by the parties. In that regard, Petitioner asserts that an ordinary artisan would encompass a person holding a Bachelor’s Degree in Electrical Engineering with three years of experience in battery design. Pet. 8; Ex. 1007 ¶ 9. Patent Owner similarly asserts that an ordinary artisan would include a person holding a Bachelor’s Degree in Electrical Engineering with two years of battery design experience. Resp. 8; Ex. 2105 ¶ 24.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“In our Decisions to Institute, we construed the 20 Amp Limitation to require that “the battery cells, when configured together in a battery pack, are capable of producing reasonably close to 20 amps of discharge current or greater over the course of delivering their entire rated capacity.” Dec. 5. Neither party disputes that construction, which we adopt for the purposes of this Final Written Decision. To the extent that any other claim term requires express construction, we discuss the construction in our analysis below. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (only claim terms in controversy need be construed, and then only to the extent necessary to resolve the controversy). The following facts are supported by a preponderance of the evidence.” slip op. at 10
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,944,173 - PTAB · Oct 1, 2015 · IPR2014-00714 · APJ Kevin W Cherry · IPR · Final written decision
The Board canceled claims 11, 74, and 81 and denied substitute claims 154–156 because they broadened claim scope, lacked written-description support, and were not shown patentable over Mostov.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“A petition for inter partes review must identify “all real parties in interest.” 35 U.S.C. § 312(a)(2). The Office Patent Trial Practice Guide provides guidance regarding factors to consider in determining whether a party is a real party in interest. 77 Fed. Reg. 48,756, 48,759–60 (Aug. 14, 2012). Considerations may include whether a non-party “funds and directs and controls” an IPR petition or proceeding. Id. at 48,760. Additional relevant factors include: the non-party’s relationship with the petitioner; the non-party’s relationship to the petition itself, including the nature or degree of involvement in the filing; and the nature of the entity filing the petition. Id. Generally, a party does not become a “real party-in-interest” merely through association with another party in an unrelated endeavor. Id. A party also is not considered a real party in interest in an inter partes review solely because it is a joint defendant with a petitioner in a patent infringement suit or is part of a joint defense group with a petitioner in the suit. Id. Whether a party who is not a named participant in a given proceeding is a “real party-in-interest” to that proceeding “is a highly fact-dependent question.” Id. at 48,759. There is no “bright line test.” Id. Courts invoke the term “real party-in-interest” to describe relationships and considerations sufficient to justify applying conventional principles of estoppel and preclusion. Id. Here, even assuming this contention is timely, Patent Owner has failed to provide any evidence, besides the mere fact that the other parties are co-defendants in a lawsuit or alleged infringers, to support the contention that Petitioner has failed to name all of the real parties in interest. That one fact, without any further proof of control or involvement by these parties in this proceeding, is insufficient to establish that Petitioner has failed to name” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“ii. Petitioner’s Expert Patent Owner asks that we “dismiss [Petitioner’s] Expert Declaration and disqualify [Petitioner’s Declarant] for making and using a false writing.” PO Resp. 9. Patent Owner contends that Petitioner’s Declarant falsely claimed that certain patent applications were patents by listing them under the heading “Patents” in his Resume. Id. at 8–9. A Patent Owner Response is not the proper vehicle to seek to exclude testimony. See 37 C.F.R. § 42.64(c). Moreover, even if it were the proper vehicle, we are not persuaded that the alleged “falsehood” that Patent Owner identified—listing patent applications, which are clearly identified as such, under a heading titled “Patents”—is, in any way, misleading. Thus, we decline Patent Owner’s request that we dismiss Dr. Vishwanath’s testimony.3 C. Motion to Amend As discussed above, in the Motion to Amend, Patent Owner requests” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“i. Level of Ordinary Skill in the Art Neither party puts forward a succinct definition of the level of ordinary skill in the art. Petitioner’s declarant, however, has put forward a detailed discussion of various references dated before April 20064 (the date Patent Owner now alleges is the priority date) related to subject matter of the ’990 patent. See Ex. 1005 ¶¶ 20–74, 94–99. We have reviewed that discussion and the references cited in those paragraphs. We have found it accurately reflects the teachings of the references. Moreover, we agree with Petitioner’s declarant that the references are analogous to the claimed invention, and, as such, represent the level of skill in the relevant art at the time of the invention. See In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (finding that the Board did not err in concluding that the level of ordinary skill was best determined by the references of record); In re Oelrich, 579 F.2d 86, 91(CCPA 1978) (“[T]he PTO usually must evaluate . . . the level of ordinary skill solely on the cold words of the literature.”); see 4 We accept this date as the priority date only for the sake of argument. also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he absence of specific findings on the level of skill in the art does not give rise to reversible error ‘where the prior art itself reflects an appropriate level and a need for testimony is not shown.”’).” slip op. at 13
- ScopeMotion to amend, deniedDenied
“We agree with Petitioner and find, based on the Patent Owner’s own arguments, that these terms improperly broaden the scope of the claims. As Patent Owner explains, the added language is broad enough to include the removed items, and is intended to reflect the entire genus of “monitoring equipment” and “communications devices” that “are capable of communication and capable of receiving signals.” Mot. to Amend 4, 5. Thus, the claim has been broadened to not only include the listed species that have been removed, but anything falling within the claimed genus. Accordingly, we find that this amendment impermissibly broadens the claim. As for the second change in the claim language, we find that Patent Owner has failed to show why removal of the entire passage “wherein, the communication device receives a signal via any of one or more products listed in any of the plurality of product grouping categories,” would not impermissibly broaden the scope of claim 154. The deletion of this limitation necessarily broadens the claim in that limitation’s aspect. See In re Clement, 131 F.3d 1464, 1468 (Fed. Cir. 1997) (“For example, a reissue claim that deletes a limitation or element from the patent claims is broader in that limitation’s aspect.”). Given that Patent Owner has entirely deleted this limitation and Patent Owner bears the burden of showing entitlement to the amendment, it was incumbent on Patent Owner to explain why removing this entire passage from claim 154 would not broaden the scope of the claim. See In re Bennett, 766 F.2d 524, 526 (Fed. Cir. 1985) (en banc) (“[A] claim is broadened if it is broader in any respect than the original claim, even though it may be narrowed in other respects.”).” slip op. at 17
§ 102 anticipation
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.