• Texas Instruments Incorporated v. Greenthread, LLCInstituted
  PTAB · Oct 11, 2024 · IPR2024-00771 · APJ Grace Karaffa Obermann · IPR · Institution

  The Board instituted IPR on claims 1–6 of the ’195 patent on all asserted grounds and granted Texas Instruments’ motion to join the Cirrus IPR.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Because the Preliminary Response in the instant case includes arguments pertaining to the sufficiency of the asserted prior art references, which were not raised in the preliminary response in the Cirrus IPR, we briefly address below the patentability of the challenged claims.” slip op. at 6

  • PTAB / AIA Trials › §315(b) time barNot time barredDecided for petitioner

    “II. TIMELINESS OF THE PETITION UNDER 35 U.S.C. § 315(B) Pursuant to 35 U.S.C. § 315(b), “[a]n inter partes review may not be instituted if the petition requesting the proceeding is filed more than 1 year after the date on which the petitioner, real party in interest, or privy of the petitioner is served with a complaint alleging infringement of the patent.” Patent Owner argues that the Petition is untimely under 35 U.S.C. § 315(b) because Petitioner is in privity with time-barred entities. Prelim. Resp. 10– 30. However, 35 U.S.C. § 315(b) also provides that the one-year time bar “shall not apply to a request for joinder under subsection (c).” See also 37 C.F.R. § 42.122(b). Because the Petition is accompanied by a timely request for joinder (Paper 2) to the instituted proceeding (IPR2024-00017), which we grant as further discussed below, Patent Owner’s argument that the Petition is time-barred under 35 U.S.C. § 315(b) is moot, irrespective of whether Petitioner is in privity with time-barred entities.” slip op. at 5

  • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted

    “B. Whether to Join Petitioner as a Party to the Cirrus IPR Joinder may be authorized when warranted, but the decision to grant joinder is discretionary. See 35 U.S.C. § 315(c); 37 C.F.R. § 42.122. A motion for joinder should (1) set forth reasons why joinder is appropriate; (2) identify any new grounds of unpatentability asserted in the petition; (3) explain what impact (if any) joinder would have on the trial schedule for the existing review; and (4) address specifically how briefing and discovery may be simplified. See, e.g., Kyocera Corp. v. Softview LLC, IPR2013- 00004, Paper 15 (PTAB April 24, 2013). As the moving party, Petitioner bears the burden of proving that it is entitled to the requested relief. 37 C.F.R. § 42.20(c). As an initial matter, we find the Motion for Joinder meets the timing requirements of 37 C.F.R. § 42.122(b) because Petitioner filed it on April 4, 2024, no later than one month after the Cirrus IPR was instituted on May 1, 2024.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “5. “Aid the Movement of Minority Carriers” Patent Owner argues that the Petition fails to show that the applied prior art references disclose the claim limitations “requiring ‘aid the movement of minority carriers,’” as twice recited in claim 1. Prelim. Resp. 8. Patent Owner summarizes this dispute as follows: The challenged patent discloses and claims a semiconductor device with (among other things) a “drift layer having a graded concentration of dopants . . . [and] further having a first static unidirectional electric drift field to aid the movement of minority carriers.”[] The Petition should not be instituted, because (among other deficiencies) it fails to show that the prior art discloses the “aid the movement of minority carriers” claim limitation. Rather than pointing to anything in the prior art that would teach this claim limitation, the Petition assumes that any “graded concentration of dopants” would necessarily “aid the movement of minority carriers.” The Petition contains no analysis explaining why the “graded concentration of dopants” in the prior art meet the “aid the movement of minority carriers” limitation, apart from the fact that they are “graded concentration of dopants.” In other words, Petitioner reads the “aid the movement of minority carriers” limitation out of the claims completely. Id. at 1–2. Patent Owner includes additional details in support of its view that the asserted prior art fails to establish obviousness of the “aid carrier movement” limitations of claim 1. Prelim. Resp. 1–10.” slip op. at 8

  § 102 anticipation§ 103 obviousness
  Patents in suitUS 8,421,195
• Kohler Co. v. Delta Faucet Co.Instituted
  PTAB · Oct 4, 2024 · IPR2024-00700 · APJ Jane E Inglese · IPR · Institution

  The Board instituted IPR on claims 1–24 and all asserted grounds, finding a reasonable likelihood that Kohler would prevail on at least one claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Petitioner provides sufficient information for purposes of institution to show that Tseng discloses or would have suggested a translucent light pipe defining a closed loop to diffuse light from light emitters outwardly away from a housing. Tseng’s Figures 30 and 37 show that rib 371 and protrusion 383 of translucent light conductors 37, 38 (light pipes), respectively, are both shaped as unbroken circles. Ex. 1004, Figs. 37, 38; see also id. ¶ 24 (describing “circular” rib), ¶ 26 (indicating that the “light conductor is formed in a sleeve shape”). Tseng discloses that light from LED elements 40 enters input face 311 of Tseng’s light conductors 37, 38, travels through transmission portion 312, and is emitted through downward facing output face 313. Ex. 1004 ¶¶ 91, 94, 97, 98, Figs. 30, 31, 35, 36, 37. Light is also emitted from outwardly extending annular rib 371 and protrusion 383 of light conductors 37, 38, respectively, which “enhance[s] light transmission.” Id. Petitioner, therefore, provides sufficient information to show that Tseng’s translucent light conductors 37, 38 (light pipes) define a closed loop to diffuse light from LED elements 40 (light emitters) outwardly away from external sleeve 34 (housing).” slip op. at 18

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had a degree in industrial design or an equivalent field, and two years of professional experience working with kitchen, bath, or other plumbing fixtures (or similar products), or an equivalent level of skill, knowledge, and experience. Pet. 14. Petitioner asserts that a POSITA also would have been aware of, and generally knowledgeable about, the standard features and functionality of kitchen, bath, or other plumbing fixtures (or similar products). Id. Patent Owner neither adopts nor disputes Petitioner’s proposed level of ordinary skill in the art. Prelim. Resp. 10. For purposes of this Decision, we apply Petitioner’s definition of a POSITA, which is undisputed on this record, and is consistent with the level of ordinary skill in the art at the time of the invention as reflected in the asserted prior art.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Interpretation We interpret claims “using the same claim construction standard that would be used to construe the claims in a civil action held under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention when read in the context of the specification and prosecution history. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe terms in controversy only to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner asserts that the claim terms do not require construction and should be afforded their plain and ordinary meaning. Pet. 13. Patent Owner contends that it “has applied the plain and ordinary meaning of the claim terms.” Prelim. Resp. 10. Taking into consideration the information presented, we determine that none of the claim terms requires express construction for purposes of deciding whether to institute review.7” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “its sprayhead by routing an electric wire connected to an external power supply through the shower head. Pet. 44 (citing Ex. 1004 ¶ 68, Figs. 1–5). Petitioner asserts that because Tseng’s shower head is designed to be pulled out, the wire is subject to stress and strain, which could lead to failure over time. Id. (citing Ex. 1003 ¶¶ 251–253). According to Petitioner, incorporating Mizuno’s hydroelectric generator into Tseng’s shower head would obviate the need for an external power supply or battery, which would reduce installation and operation costs, prevent a potential wiring failure, and eliminate periodic battery replacement. Id. at 45 (citing Ex. 1003 ¶¶ 257–260). Petitioner asserts that a person of ordinary skill in the art, therefore, would have been motivated to incorporate Mizuno’s hydroelectric generator into Tseng’s shower head, and would have had a reasonable expectation of success in doing so because Mizuno’s hydroelectric generator is designed and intended to be integrated into a faucet’s shower head to reliably power LEDs. Id. at 45–46 (citing Ex. 1008 ¶¶ 1, 2). Patent Owner counters that a person of ordinary skill in the art would not have had any reason to modify Tseng in view of Mizuno. Prelim. Resp. 32. Patent Owner contends that Tseng expressly set out to develop a design that includes electrical wiring, and did so successfully by improving the integration of electrical wiring into its shower head design. Id. at 33–34 (citing Ex. 1004 ¶¶ 9, 102–110). Patent Owner further contends that a person of ordinary skill in the art would not have been motivated to completely redesign Tseng’s shower head to change the power source entirely to eliminate wiring. Id. Patent Owner contends that a person of ordinary skill in the art also would not have had a reasonable expectation of success in incorporating Mizuno’s hydroelectric generator into Tseng’s shower head because Tseng explicitly discloses that the space in its shower head is narrow. Id. at 36 (citing Ex. 1004 ¶¶ 7, 108). According to Patent Owner, Mizuno’s hydroelectric generator requires room for additional components beyond the hydrogenator, including a voltage stabilizer, cooling components, and a relief valve, which Patent Owner contends would have discouraged the ordinarily skilled artisan from a major redesign of Tseng’s faucet necessary to incorporate these elements. Id. at 37. We have considered Petitioner and Patent Owner’s assertions for ground 2. Because Petitioner demonstrates a reasonable likelihood of prevailing in its challenge to the patentability of claim 1 for ground 1, resolution of the disputed factual issues raised by Petitioner and Patent Owner in ground 2 is best left for trial after full development of the record.” slip op. at 22

  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,393,363
• Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentable
  PTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

    “To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45

  Patent outcomesUS 10,994,923 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,994,923
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Honeywell International Inc. v. DSM IP Assets B.V.Institution denied
  PTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution

  The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23

  • Skill levelOther

    “PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner

    “a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

    “Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,280,532
• Apple Inc. v. RJ Technology, LLCInstituted
  PTAB · Aug 20, 2024 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Institution

  The Board instituted review of claims 1–18 on all asserted grounds and granted Apple’s motion to join IPR2023-01183.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Having considered the arguments and evidence presented by Petitioner, we determine that Petitioner has demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’641 patent. Accordingly, we institute an inter partes review as to all the challenged claims of the ’641 patent on all the grounds of unpatentability set forth in the Petition. And, for the reasons set forth below, we grant Petitioner’s Motion for Joinder.” slip op. at 2

  • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted

    “In considering a motion for joinder, and whether such joinder is appropriate, the Board may consider “whether a new ground of unpatentability is raised in the second petition, how the cost and schedule of the first proceeding will be impacted if joinder is granted, and whether granting joinder will add to the complexity of briefing and/or discovery.” Patent Trial and Appeal Board Consolidated Trial Practice Guide November 20197 at 76 (citing Kyocera Corp. v. SoftView LLC, IPR2013-00004, Paper 15 at 4 (PTAB Apr. 24, 2013)).” slip op. at 9

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. at 11–12 (citing Ex. 1002 ¶¶ 50–51). Upon review of the prior art of record and the Petitioner’s arguments, we adopt Petitioner’s uncontested definition of the person of ordinary skill in the art for purposes of this Decision as it appears consistent with the ’641 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner provides constructions for the terms “A method for improving . . . characterized in that,” “ratio of positive electrode material to negative electrode material as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V” (claim 5), “as calculated by a specific capacity with a charge voltage limited to 4.2 V” (claim 1), and “at least 7500 of capacity” (claim 11). Pet. 8–11. For purposes of this decision, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8

  Claim constructioncites Phillips · KSR · Graham
  Patents in suitUS 7,749,641
• Philip Morris Products, S.A. v. Rai Strategic Holdings, Inc.All claims unpatentable
  PTAB · Jul 31, 2024 · PGR2020-00071 · APJ Jeffrey W Abraham · PGR · Remand

  On remand, the Board held claims 10 and 27 unpatentable as obvious over Robinson, Greim, and Adams because skilled artisans would have optimized heater length through routine experimentation.

  RulingsRemand decision

  • RemandOther

    “Standard Operating Procedure 3 communicating the parties’ positions on submitting additional briefing on remand. Ex. 3001.2 We responded on April 15, 2024, authorizing the parties to file additional briefs limited to the question of “whether the Federal Circuit’s determinations on written description are applicable to an obviousness analysis, and if so, how they should be applied.” Ex. 3001. Petitioner filed its Supplemental Brief on Remand on April 29, 2024 (Paper 41, “Pet. Supp. Br.”), and Patent Owner filed its Supplemental Reply Brief on Remand on May 13, 2024 (Paper 42, “PO Supp. Reply”). B. The Issue on Remand As part of our Final Written Decision, we determined that Petitioner established, by a preponderance of the evidence, that claims 10 and 27 lack adequate written description support. FWD 38–41. In view of this, we declined to address Petitioner’s arguments that claims 10 and 27 are unpatentable as obvious in view of Robinson,3 Greim,4 and Adams.5” slip op. at 4

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a Bachelor’s degree in mechanical engineering, electrical engineering, chemistry, or physics, or a related field, and three to four years of industry experience, or a Master’s degree in mechanical engineering, electrical engineering, chemistry, or physics, or a related field, and one to two years of industry experience. Such a [person of ordinary skill in the art] would have been familiar with electrically powered smoking articles and/or the components and underlying technology used therein. Pet. 14 (citing Ex. 1004 ¶¶ 26–30). Patent Owner states that “[f]or purposes of the trial in this proceeding, [Patent Owner] accepts Petitioner’s proposed education and experience level of the [person of ordinary skill in the art].” PO Resp. 13. In view of the foregoing, for purposes of this Decision, we adopt Petitioner’s definition of a person of ordinary skill in the art. The prior art of record reflects this level of ordinary skill. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[t]he challenged claims are unpatentable under any reasonable construction,” and, “for purposes of this proceeding . . . adopts the plain meaning of the claims and submits that no claim term requires construction.” Pet. 14. Patent Owner contends it was improper for Petitioner to adopt the plain meaning of the claims without explaining what it considers the plain meaning of each claim term to be. PO Resp. 13. Patent Owner does not offer a construction for any claim term. PO Resp. 13. After considering the full record developed during trial, we determine that no claim limitations need an express construction for purposes of resolving the controversy.” slip op. at 18

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “Although Patent Owner is correct that Petitioner does not direct us to any disclosure of a heating member having a length that “falls within the claimed range,” such a disclosure in the art is not required for a showing of obviousness. See, e.g., In re Huang, 100 F.3d 135, 136 (Fed. Cir. 1996). In Huang, the claim required a racquet grip comprising a textile layer and a polyurethane layer, and that the ratio of their thicknesses be “larger than approximately 0.18.” Id. at 137. The prior art disclosed a textile layer and polyurethane layer in thickness ratios ranging from 0.111–0.142. Id. at 136. Although the prior art did not disclose a ratio in the claimed range, the Federal Circuit affirmed the Board’s obviousness rejection because the evidence showed that “one of ordinary skill in the art would have experimented with various thicknesses to obtain an optimum range.” Id. at 139; see In re Aller, 220 F.2d 454 (CCPA 1955) (affirming an obviousness rejection of a claim to a chemical process reciting use of 25– 70% sulfuric acid at 40–80 degrees when the prior art disclosed the same reaction with 10% sulfuric acid at 100 degrees); In re Hill, 284 F.2d 955 (CCPA 1960) (affirming an obviousness rejection of a claim to a chemical process conducted at 150–250 degrees when the prior art disclosed the same reaction at 300 degrees). The Federal Circuit also noted that “Huang does not contend that he has achieved unexpected results by increasing the thickness of the polyurethane layer.” Huang, 100 F.3d at 139–140. Those principles apply with equal force to the facts in this case. Here, the evidence of record demonstrates that heaters having a length that spans some percentage of the length of the disposable aerosol forming substance were known in the art. For example, Robinson discloses one embodiment wherein heating element 72 has an elongated portion that extends into tobacco segment 89. Ex. 1006, 27:35–39, Fig. 3. Greim likewise discloses a heating element having some length, which may be inserted into a plug of an aerosol-forming substrate. Ex. 1007, 13, Fig. 4. Adams discloses similar information. Ex. 1008 ¶ 45 (“The axial length of the projection 72 is selected so that it does not extend all the way through the tobacco plug.”), Fig. 7. Following the reasoning in Huang, these disclosures of a heater having some length, albeit not necessarily a length in the claimed range, are sufficient to demonstrate obviousness if there is evidence demonstrating “one of ordinary skill in the art would have experimented with various [lengths] to obtain an optimum range” and there is no evidence that the claimed range provides unexpected results. Huang, 100 F.3d at 139.” slip op. at 22

  Patent outcomesUS 10,492,542 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,492,542
• Nespresso USA, Inc. v. K-Fee System GmbHInstituted
  PTAB · Jun 25, 2024 · IPR2024-00304 · APJ James J Mayberry · IPR · Institution

  The Board instituted IPR of claims 1–12 based on a reasonable likelihood that claim 1 is obvious over Yoakim, Jarisch, and Rossi.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institute review. 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4(a) (2023) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, upon considering the Petition, Preliminary Response, and evidence of record, we institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “have had “a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, and experience with sensors for recognizing an identifier.” Pet. 16–17 (referencing Ex. 1003 ¶ 40; IPR2022-01574, Paper 12, 15). Patent Owner does not dispute Petitioner’s characterization of the level of ordinary skill in the art of the ’830 patent. For purposes of this Decision, based on the prior art, the sophistication of the technology at issue, and Mr. Jobin’s Declaration testimony, we adopt Petitioner’s unopposed definition of the level of ordinary skill. The ’830 patent, as well as the prior art of record, includes systems that use identifiers on a capsule to control the operation of a beverage machine. See, e.g., Ex. 1001, 1:28–34 (“[T]he present invention . . . has an identifier, which allows to individualize the respective portion capsule.”); Ex. 1004 ¶ 25 (discussing the system’s “identification means”); Ex. 1005 ¶ 1 (“The invention relates to the preparation of a beverage by use of a capsule containing beverage ingredient in a beverage production device. The present invention in particular focuses on the detection of the capsule.”); Ex. 1041, code (57) (“The process for controlling the operation of an edibleproduct making machine [includes] . . . recogni[zing] an identifying element . . . .”). Cf. Nespresso USA, Inc. v. K-Fee Sys. GmbH, IPR2022- 01574, Paper 29, 19–20 (PTAB April 10, 2024) (finding, for a related patent claiming similar subject matter, that the level of ordinary skill in the art is “is a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier”).” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededPlain and ordinary meaningOther

    “apparent interpretations that [Patent Owner] offered in its infringement contentions.” Pet. 17 (referencing Ex. 1049). Petitioner then provides certain examples. Id. at 17–23. Petitioner concludes “that for this proceeding, no claim terms require formal construction.” Id. at 23 (referencing Ex. 1003 ¶¶ 150–153). Patent Owner does not address claim construction. We agree with Petitioner that, for the purposes of this Decision, we need not expressly construe any claim terms to resolve the parties’ disputes. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We apply the plain and ordinary meaning in this Decision. To the extent that the scope of any particular claim term requires discussion, however, we provide it in our assessment of the challenges.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In any event, Patent Owner’s reasonable expectation of success focuses on the wrong inquiry. “The reasonable expectation of success requirement refers to the likelihood of success in combining references to meet the limitations of the claimed invention.” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). The claimed invention is not directed to reading the code. Instead, the claim is directed to a portion capsule with an individualized identifier on the bottom of the capsule’s flange, with the identifier having certain qualities. Petitioner sufficiently demonstrates, on the current record, that a person having ordinary skill in the art would have had a reasonable expectation of success in including an identifier on the bottom of the flange of a portion capsule as taught by Jarisch. See Pet. 42 (“Jarisch explicitly teaches positioning an optical code ‘on the bottom of the rim of the capsule which is opposed to the lid of the capsule.’” (quoting Ex. 1005 ¶ 22)). iii. Combining Yoakim and Jarisch with Rossi Next, Patent Owner argues that Petitioner’s reasons for combining Rossi’s teaching of a capsule identification system is deficient because Yoakim already achieves a safety function by using a capsule and capsule holder with complementary shapes. Prelim. Resp. 39 (referencing Ex. 1004 ¶ 205); see also Ex. 1004 ¶ 205 (describing gripping structure 840 on the bottom of an exemplary capsule that serves as a “lock” into which a “key” structure in the capsule holder fits). We have considered Patent Owner’s argument and determine, on the current record, that it does not demonstrate a deficiency in Petitioner’s position for purposes of instituting trial. This argument is directed to a single embodiment with gripping structure 840, a feature not relied upon in the Petition for satisfying any claim limitations. Even if Yoakim discloses one way to ensure compatible capsules are used, such a disclosure does not mean that a person having ordinary skill in the art would not have found it obvious to use a different method known in the art that could be employed with predictable results for capsules that do not employ a gripping structure. Cf. KSR Int’l Co., 550 U.S. at 417 (“[I]f a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.”). Also, Petitioner’s rationale for employing Rossi’s teachings is broader than safety considerations. The Petition identifies “greater specificity and accuracy of brewing conditions” as well as increased safety. See Pet. 44.” slip op. at 28

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,465,830
• Nespresso USA, Inc. v. K-Fee System GmbHInstituted
  PTAB · Jun 25, 2024 · IPR2024-00299 · APJ James J Mayberry · IPR · Institution

  The Board instituted review of claims 1–8 based on a reasonable likelihood that claim 1 is obvious over Yoakim, Jarisch ’929, Rossi, and Rapparini.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institute review. 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4(a) (2023) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, upon considering the Petition, Preliminary Response, and evidence of record, we institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner contends that a person of ordinary skill in the art would have had “a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, and experience with sensors for recognizing an identifier.” Pet. 16 (referencing Ex. 1003 ¶ 40; IPR2022-01574, Paper 12, 15). Patent Owner does not dispute Petitioner’s characterization of the level of ordinary skill in the art of the ’910 patent. For purposes of this Decision, based on the prior art, the sophistication of the technology at issue, and Mr. Jobin’s Declaration testimony, we adopt Petitioner’s unopposed definition of the level of ordinary skill. The ’901 patent, as well as the prior art of record, includes systems that use identifiers on a capsule to control the operation of a beverage machine. See, e.g., Ex. 1001, 1:28–34 (“[T]he present invention . . . has an identifier, which allows to individualize the respective portion capsule.”); Ex. 1004 ¶ 25 (discussing the system’s “identification means”); Ex. 1006 ¶ 1 (“The present invention relates in particular to coding supports adapted to store information related to a capsule, capsules associated with/for embedding coding supports, reading and processing arrangements for reading and using such information for preparing a beverage.”); Ex. 1041, code (57) (“The process for controlling the operation of an edible-product making machine [includes] . . . recogni[zing] an” slip op. at 17

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their ordinary and customary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1312–14 (Fed. Cir. 2005) (en banc) (“We have frequently stated that the words of a claim ‘are generally given their ordinary and customary meaning.’” (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)).” slip op. at 18

  • Obviousness (§103) › Analogous artAnalogous artOther

    “a) Petitioner’s contentions Petitioner contends that Yoakim, Jarisch ’929, Rossi, and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/expresso machines.” Pet. 37 (referencing Ex. 1004 ¶¶ 2, 3; Ex. 1006 ¶¶ 1, 2; Ex. 1008 ¶ 1; Ex. 1041, 3; Ex. 1003 ¶ 220); cf. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.”). Patent Owner does not dispute this contention at this stage of the proceeding.” slip op. at 20

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,554,910
• Nespresso USA, Inc. v. K-Fee System GmbHInstituted
  PTAB · Jun 25, 2024 · IPR2024-00257 · APJ James J Mayberry · IPR · Institution

  The Board instituted review of claims 1–24, finding a reasonable likelihood that claim 1 would have been obvious over Yoakim, Jarisch ’929, Rossi, and Rapparini.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “institute review. 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4(a) (2023) (permitting the Board to institute trial on behalf of the Director). To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, upon considering the Petition, Preliminary Response, and evidence of record, we institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedOther

    “For purposes of this Decision, based on the prior art, the sophistication of the technology at issue, and Mr. Jobin’s Declaration testimony, we adopt Petitioner’s unopposed definition of the level of ordinary skill. The ’722 patent, as well as the prior art of record, includes systems that use identifiers on a capsule to control the operation of a beverage machine. See, e.g., Ex. 1001, 1:38–44 (“[T]he present invention . . . has an identifier, which allows to individualize the respective portion capsule.”); Ex. 1004 ¶ 25 (discussing the system’s “identification means”); Ex. 1006 ¶ 1 (“The present invention relates in particular to coding supports adapted to store information related to a capsule, capsules associated with/for embedding coding supports, reading and processing arrangements for reading and using such information for preparing a beverage.”); Ex. 1041, code (57) (“The process for controlling the operation of an edibleproduct making machine [includes] . . . recogni[zing] an identifying element . . . .”). Cf. Nespresso USA, Inc. v. K-Fee Sys. GmbH, IPR2022-01574, Paper 29, 19–20 (PTAB April 10, 2024) (finding, for a related patent claiming similar subject matter, that the level of ordinary skill in the art is “is a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier”).” slip op. at 17

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededPlain and ordinary meaningOther

    “Patent Owner does not address claim construction. We agree with Petitioner that, for the purposes of this Decision, we need not expressly construe any claim terms to resolve the parties’ disputes. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We apply the plain and ordinary meaning in this Decision. To the extent that the scope of any particular claim term requires discussion, however, we provide it in our assessment of the challenges.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “current record, that they do not demonstrate a deficiency in Petitioner’s position for purposes of instituting trial. Petitioner provides a reason to position a code on the bottom side of the rim of a capsule, taken directly from Jarisch ’929. See Pet. 37 (referencing Ex. 1006 ¶¶ 17, 63); see also Ex. 1006 ¶¶ 17 (“These locations are particularly advantageous since they . . . [are] less prone to damages caused by the processing module and in particular by the pyramidal plate, and to ingredients projections. As a consequence, the amount of coded information and the reliability of the readings are both improved.”), 63 (same); cf. KSR Int’l Co., 550 U.S. at 418 (stating that, to facilitate the analysis of an obviousness position, the proponent should provide “some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness”). On the current record, Patent Owner’s attorney argument does not identify sufficiently a deficiency in Petitioner’s reasoning.” slip op. at 27

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,548,722

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.