- Axon Enterprise, Inc. / Dedrone Holdings, Inc. et al. v. Airspace Defense, Inc.Some claims unpatentablePTAB · Oct 6, 2026 · IPR2025-00629 · APJ Scott C Moore · IPR · Final written decision
Original claim 12 is not unpatentable; substitute claim 37 is added, while substitute claims 21–28 and 30–36 are denied as obvious.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“F.3d at 1279–80, we begin our analysis with the Specification of the ’711 Patent. The Specification indicates when a UAV (such as the recited “reference aerial vehicle”) navigates autonomously, it flies without manual control, and can, for example, track and fly to a target using information captured onboard the vehicle itself. See Ex. 1001, 3:24–28 (“[I]t may not be desirable to manually control the interceptor aerial vehicle to follow the target UAV. In some embodiments, the interceptor aerial vehicle is able to autonomously track and fly to the target UAV using machine vision based on images captured by a camera of the interceptor aerial vehicle.”). The Specification also indicates that “autonomous” means more than just “automatic flight,” and clarifies that autonomous navigation occurs when a UAV that previously received a target location from an external source subsequently turns and flies itself towards the received location. See, e.g., id. at 4:15–17 (disclosing that the detected location of a target may be provided to an interceptor “to allow it to automatically and autonomously fly toward the direction of the detected location”); 15:64–16:3 (automatic and autonomous navigation occurs when an interceptor’s navigation component and/or flight controller receive the location of a target, and adjust the interceptor “to turn and fly towards the received location . . . based on the received location”); 16:49–60 (“For example, a flight direction and/or speed of an interceptor aerial vehicle are automatically and autonomously adjusted based on a location and size of the target within the captured image. . . . This allows the flight path of the interceptor aerial vehicle to be dynamically adjusted to track and follow a moving target.”).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“have had reason to combine Beard and Laufer in the manner proposed by Petitioner, the combination would not satisfy the Autonomous Navigation limitation required by claim 12 because Laufer’s autopilot commands are generated by and transmitted from a remote command center (i.e., Laufer’s central controller 115). PO Resp. 15–16. In its Reply, Petitioner does not dispute that Laufer’s autopilot commands are generated by Laufer’s central controller 115, which is remote from the aircraft being controlled. See Reply 13–17. Petitioner asserts, however, that the combination still satisfies the Autonomous Navigation limitation because these autopilot commands are generated without human input. See id. Based on the complete trial record, Patent Owner’s arguments are persuasive. See PO Resp. 15–16; PO Sur-reply 42, 1–6; Ex. 2025 ¶¶ 84–87. The flight of Beard’s UAV 100 under the control of Laufer’s autopilot commands does not satisfy the Autonomous Navigation limitation of claim 12, as we have construed that limitation, because Laufer’s autopilot commands are generated at a location that is remote from UAV 100 (Laufer’s central controller 115.) See, e.g., Ex. 1010 ¶ 40 (“Central controller 115 uses autopilot command module 440 to generate autopilot aircraft commands”), ¶¶ 26, 30 (clarifying that central controller 115 and the controlled interceptor aircraft are separate devices that may communicate through a “wireless connection”), Fig. 4 (depicting “aircraft control commands 475” being generated externally from the depicted “Interceptor Aircraft”); see also Ex. 2025 ¶¶ 95–95. Petitioner never disputes that, in the proposed combination, Laufer’s central controller 115 would remain external to Beard’s UAV 100. See Reply 13–17. Instead, Petitioner relies on its proposed construction of the Autonomous Navigation limitation, which would have encompassed such an arrangement. See id. Our construction of the Autonomous Navigation limitation, which did not adopt Petitioner’s claim construction position, is dispositive of Petitioner’s argument. We thus determine that Petitioner has not shown by a preponderance of the evidence that claim 12 would have been obvious over Beard and Laufer.” slip op. at 15
- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“the legal requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4, 7–8. For the reasons that follow, we determine that Patent Owner has satisfied this burden. 1. Proposal of a Reasonable Number of Substitute Claims A motion to amend must “propose a reasonable number of substitute claims.” 35 U.S.C. § 316(d)(1)(B); see also 37 C.F.R. § 42.121(a)(3) (“A motion to amend may cancel a challenged claim or propose a reasonable number of substitute claims.”). “There is a rebuttable presumption that a reasonable number of substitute claims per challenged claim is one (1) substitute claim.” Lectrosonics, IPR2018-01129, Paper 15 at 4; see also 37 C.F.R. § 42.121(a)(3). Patent Owner has shown it proposes a reasonable number of substitute claims by proposing a single substitute claim for each of challenged claims 1–4, 8–11, and 13–20. MTA 1–2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 2. Amendments Respond to a Ground of Unpatentability “A motion to amend may be denied where … [t]he amendment does not respond to a ground of unpatentability involved in the trial.” 37 C.F.R. § 42.121(a)(2)(i). Patent Owner has responded to the grounds of unpatentability involved in this proceeding by amending the claims in response to the Petition’s asserted prior art. See MTA 2, 25, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 3. No Enlargement of the Scope of the Claims An amendment may not seek to enlarge the scope of the claims of the patent. 35 U.S.C. § 316(d)(3); 37 C.F.R. §§ 42.121(b)(1)–(b)(2). Patent Owner asserts that the amendments in the Motion do not enlarge the scope of the claims of the patent because each proposed substitute claim “retains all of the limitations of the corresponding challenged claim, and each proposed independent substitute claim adds further limitations.” See MTA 2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 4. No Introduction of New Matter An amendment may not introduce new matter. 35 U.S.C. § 316(d)(3);” slip op. at 22
- 112 supportDecided for patent owner
“Having considered the evidence and argument cited by both parties, we determine there is sufficient written description support for the disputed portions of limitations [37.e1], [37.e3,] and [37.e4]. The ’452 application discloses selecting between groups of processing schemes (e.g., algorithms) depending on a confidence level, where the groups are, for example: high cost, high robustness algorithms; medium cost, medium robustness algorithms; and low cost, low robustness algorithms. See Ex. 2019 ¶¶ 146–147. These schemes or algorithms may be neural networks. See, e.g., id. ¶ 50 (including neural network as a type of algorithm); see also id. ¶¶ 109–110); see generally MTA Opp 1 (not disputing that schemes may be neural networks). Specifically, the ’452 application describes “algorithms that process video frames of one or more video data streams,” and “produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Id. ¶ 141. The ’452 application also discloses the concept of switching between neural networks based on confidence levels. In particular, the ’452 application discloses that a “process cycles through the processing schemes to produce a detection of an object,” for example, where “if the confidence number is higher than an activation number, an action is performed to stop or change a running group (i) and select or switch to group (ii).” Id. ¶ 146. More particularly, “a processing scheme from the group of (i) High cost (low refresh rate), high robustness algorithm[s] can select a cheaper processing scheme from the group of (ii) Medium cost, medium robustness algorithms.” Id. The ’452 application additionally discloses that schemes or algorithms (e.g., neural networks) are applied to individual video frames, and that the confidence levels that determine which neural network will be applied in the future are also derived from individual video frames. For example, as discussed above, the ’452 application describes that “[t]he processing schemes produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Ex. 2019 ¶ 141 (emphases added). The ’452 application also describes selecting and applying an individual neural network, rather than only selecting and applying a group of processing schemes. For example, as highlighted above, the ’452 application describes that “a processing scheme from the” “High” group “can select a cheaper processing scheme from the” “Medium” group. Id. ¶ 146 (emphases added). In our view, these disclosures, read together, would reasonably convey to one skilled in the art that the inventor had possession of the disputed subject matter described above. See Ariad, 598 F.3d at 1351.” slip op. at 24
Patent outcomesUS 10,514,711 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 10,514,711 - Billerud Aktiebolag (Publ) v. Westrock MWV, LLCSome claims unpatentablePTAB · Mar 12, 2025 · IPR2023-01206 · APJ Elizabeth M Roesel · IPR · Final written decision
Claims 1, 2, and 4–22 are unpatentable as obvious; claim 23 was not shown unpatentable. Substitute claims 25–26 are allowed, while 24 and 27 are denied for lack of written-description support.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedOther
“Exhibits 1013 and 1014 are also not admissible as expert testimony because Mr. Wirén is not “qualified as an expert by knowledge, skill, experience, training, or education.” Fed. R. Evid. 703. “To offer expert testimony from the perspective of a skilled artisan in a patent case—like for claim construction, validity, or infringement—a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.” Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). Mr. Wirén does not meet our definition of a person of ordinary skill in the art. See Section II.B, supra. That definition is based on the undisputed testimony of Messrs. Zotterman and Klass. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. Although Mr. Wirén has a Master’s of Science in chemical engineering, he lacks any experience or specialization in paperboard manufacturing. Ex. 2011, 12:1–10, 19:6–25, 20:2–7. We therefore agree with Patent Owner that Exhibits 1013 and 1014 are the testimony of Mr. Wirén and should be excluded from evidence because Mr. Wirén is not a person of ordinary skill in the relevant art. PO MTE 5–6, 9; Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362 (Fed. Cir. 2008) (“Unless a patent lawyer is also a qualified technical” slip op. at 61
- Skill levelSkill level board ownOther
“Level of Ordinary Skill in the Art Based on the testimony of the parties’ witnesses, we determine that a person of ordinary skill in the art would have had a bachelor’s degree in paper science and engineering, chemical engineering, process engineering, mechanical engineering, or a related degree, with three to five years of experience in paperboard manufacturing, or a master’s degree in paper science and engineering, chemical engineering, process engineering, or mechanical engineering, or a similar field with a specialization in paperboard manufacturing. Ex. 1003 ¶ 24; Ex. 2003 ¶ 26. We find that the level of ordinary skill in the art, as articulated above, is consistent with the level of technical understanding and competence reflected in the ’142 Patent Specification and the asserted prior art references.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDecided for petitioner
“A claim construction that excludes a particular element is viewed as a “negative limitation.” Ethicon LLC v. Intuitive Surgical, Inc., 847 Fed. App’x 901, 907 (Fed. Cir. Mar. 15, 2021). “[S]uch exclusions must find support either in ‘the words of the claim’ or through an ‘express disclaimer or independent lexicography in the written description that would justify adding that negative limitation.’” Id. (citing Omega Eng’g, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed. Cir. 2003); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366–67 (Fed. Cir. 2002)). “The standards for finding lexicography and disavowal are exacting.” GE Lighting Sols., LLC v. AgiLight, Inc., 750 F.3d 1304, 1309 (Fed. Cir. 2014). “To act as its own lexicographer, a patentee must ‘clearly set forth a definition of the disputed claim term,’ and ‘clearly express an intent to define the term.’” Id. (citing Thorner, 669 F.3d at 1365). Similarly, disclaimer or disavowal requires that the specification or prosecution history demonstrate that the invention does not include a particular feature. Id. Here, we find no claim language, lexicography, or disclaimer in the ’142 Patent or its file history that would support defining a “hot-hard calender” as requiring that only one of the two rollers be heated to an elevated temperature.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“a contact surface of said thermo-roller is heated to an elevated temperature of at least 250°F.” Petitioner shows persuasively that the temperature limitation is taught by the combination of Fugitt and Papermaking. Pet. 32–34. Fugitt discloses that “[t]he rolls of the calender may be steam heated.” Ex. 1004 ¶ 26. In a section titled “Heated Rolls,” Papermaking discloses that “Steam can be used up to 170°C [338°F] surface temperature.” Ex. 1010, 95, 98. Petitioner is thus correct that, “[w]hile Fugitt teaches that a hot calender may be steam heated, Papermaking clarifies that one of ordinary skill in the art would understand that steam heated thermo-rollers may reach up to 338°F.” Pet. 36. Based on these disclosures, we are persuaded by Mr. Zotterman’s testimony that it would have been “obvious to heat the thermo-roller of Fugitt to at least 250°F.” Ex. 1003 ¶ 159. combine Fugitt and Papermaking because of Papermaking’s status as a “trusted handbook[],” because both references disclose a method of manufacturing a paperboard structure with hot calendering,” and “because of the known advantages of heated rollers.” Pet. 36–37; Ex. 1003 ¶¶ 157, 159, 162. Petitioner’s contention is supported by Papermaking’s disclosures that, for cartonboard, “[p]recalendering is used before the coater to reduce roughness and porosity” and “[h]igh thermo roll temperatures (in some cases over 200°C) result in bulk savings because of the temperature gradient.” Ex. 1005, 80–82; see also Pet. 38; Ex. 1003 ¶ 164 (citing these disclosures). Papermaking’s disclosed range of “up to 170°C [338°F]” for steam- heated rolls (Ex. 1010, 98), overlaps the claimed range of “at least 250°F.” Patent Owner agrees. Tr. 27:11–13. “If the relevant comparison between a disputed claim limitation and the prior art pertains to a range of overlapping values, ‘. . . even a slight overlap in range establishes a prima facie case of obviousness.’” Genentech, Inc. v. Hospira, Inc., 946 F.3d 1333, 1341 (Fed. Cir. 2020) (citing In re Peterson, 315 F.3d 1325, 1329 (Fed. Cir. 2003)). “[S]uch an overlap creates a presumption of obviousness, and . . . the burden of production falls upon the patentee to come forward with pertinent evidence that the overlapping range would not have been obvious in light of the prior art.” Id. (citing E.I. DuPont de Nemours & Co. v. Synvina C.V., 904 F.3d 996, 1006, 1008 (Fed. Cir. 2018)). slip op. at 21
Patent outcomesUS 11,293,142 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,293,142 - Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentablePTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision
Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8
- Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed
“Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22
Patent outcomesUS 10,689,740 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,689,740 - Pelican Biothermal, LLC v. Va-Q-Tec AGSome claims unpatentablePTAB · Jun 16, 2023 · PGR2021-00085 · APJ Barry L Grossman · PGR · Final written decision
The Board granted the motion to amend but held amended claim 64 unpatentable as anticipated by NanoCool 98596-type products and obvious over the cited combinations; all other amended claims were not shown unpatentable.
RulingsFinal written decision- PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part
“VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that Petitioner has demonstrated by a preponderance of the evidence that amended claim 64 is unpatentable; FURTHER ORDERED that Patent Owner’s Non-Contingent Motion to Amend is granted for claims 64 and denied for all other amended claims; and” slip op. at 77
- ExcludeMotion to exclude, deniedDenied
“A. Status as Prior Art Is a Substantive Issue, Not an Evidentiary Issue. A motion to exclude is not an appropriate mechanism for challenging the sufficiency of evidence, such as whether a reference qualifies as prior art, or the proper weight that should be afforded an argument. See Flir Systems, Inc. v. Leak Surveys, Inc., IPR2014-00411, Paper 113, 4, 8–9 (PTAB September 3, 2015); PTAB Consol. Trial Practice Guide 79 (Nov. 30 Mr. Zumwalt testifies that other NanoCool products, designated by product number 85430 and 98630, also have the same configuration as the 98830 product and are made by the same process. Thus, “the 98830, 85430, and 98630 products can be collectively referred to as ‘98830-type’ products all having the same relevant design.” Ex. 1030 ¶ 17. 2019) (“A motion to exclude . . . may not be used to challenge the sufficiency of the evidence to prove a particular fact. A motion to exclude is not a vehicle for addressing the weight to be given evidence—arguments regarding weight should appear only in the merits documents.”); Caterpillar Inc. v. Wirtgen Am., Inc., IPR2017-02187, Paper 42,17 (PTAB May 21, 2019) (status as prior art “is a substantive issue, not an evidentiary issue.”) Thus, whether the NanoCool 98830 product is prior art is not the proper basis for Patent Owner’s Motion to Exclude evidence concerning the NanoCool 98830 product.” slip op. at 29
- Skill levelSkill level board ownOther
“Neither Petitioner nor Mr. Harber provide any analysis of the factors pertinent to a determination of the level of ordinary skill, identified above, to support their conclusory statements. We give Mr. Harber’s conclusory testimony minimal probative weight. 37 C.F.R. § 42.64(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Moreover, there is no persuasive evidence to which we have been directed of the need for specific education or experience in biological or chemical technologies related to the claimed containers and inserts.” slip op. at 26
- Expert testimonyPetitioner expert discountedDecided for patent owner
“With regard to the level of ordinary skill in the art, Petitioner asserts that a person of ordinary skill would have had “a bachelor’s degree or higher degree in biological, chemical or mechanical engineering, or related sciences, and at least two to five years of experience in designing and testing ISCs [insulated shipping containers] depending on education level.” Pet. 9 (emphasis added) (citing Ex. 1002 ¶¶ 23–24). Exhibit 1002 is the Declaration testimony of Mr. Paul Haber. Mr. Harber actually states a slightly different level of ordinary skill. Mr. Harber testifies: The hypothetical POSITA would have: (i) at least a bachelor’s degree in biological, chemical or mechanical engineering, or related sciences, and have at least three to five years of experience in designing and testing ISCs [Insulated Shipping Containers][29]. Such a person may also have (ii) a higher level degree, such as a PhD and/or Master’s degree in engineering, or related sciences, and have at least two to three years of experience in designing and testing ISCs. 29 See Ex. 1002 ¶ 23. Ex. 1002 ¶ 24 (emphasis added). Mr. Harber also testifies that “[t]hese descriptions are approximate, and a higher level of education or specific skill might make up for less experience, and vice-versa.” Id.” slip op. at 25
Patent outcomesUS 10,766,685 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 10,766,685 - Simpson Strong-Tie Company Inc. v. Columbia Insurance CompanySome claims unpatentablePTAB · Mar 15, 2023 · PGR2021-00109 · APJ Stephen E Belisle · PGR · Final written decision
Claims 1–12, 15–17, and 21–23 are unpatentable; the revised contingent motion to amend is granted for claim 32 and denied for claims 24–31, 33–35, 38–40, and 44–46.
RulingsFinal written decision- Skill levelSkill level board ownOther
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art, at the time” slip op. at 22
- BurdenNot shown unpatentable
“Accordingly, based on the foregoing and the complete record before” slip op. at 38
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“C. Claim Construction We apply the claim construction standard articulated in Phillips v.” slip op. at 23
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteMixed
“persuaded by Petitioner that the limitations “a channel-shaped portion configured to receive the structural component” and “a base configured to receive an end portion of the structural component thereon to support the structural component” would not have informed the skilled artisan, with reasonable certainty, about the scope of the claimed invention. See Energizer Holdings, Inc. v. Int’l Trade Comm’n, 435 F.3d 1366, 1370 (Fed. Cir. 2006) (“When the meaning of the claim would reasonably be understood by persons of ordinary skill when read in light of the specification, the claim is not subject to invalidity upon departure from the protocol of ‘antecedent basis.’”). Accordingly, we conclude that Petitioner” slip op. at 40
Patent outcomesUS 11,021,867 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 11,021,867 - Cradlepoint, Inc. / Sierra Wireless, Inc. et al. v. Sisvel International S.A.Some claims unpatentablePTAB · Jan 18, 2022 · IPR2020-01102 · APJ Aaron W Moore · IPR · Final written decision
Claims 1–5, 15–20, 30, and 31 are unpatentable as obvious over Qualcomm and TS25.322; claims 6–14 and 21–29 were not shown unpatentable. Substitute claims 32–35, 45–49, 59, and 60 were denied.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art at the time of the invention “would have a degree in electrical engineering or similar discipline, with at least three years of relevant industry or research experience in telecommunication, including familiarity with cellular communications technologies,” that this person “would also have familiarity with WCDMA,” and that “[t]his definition is approximate,” as “more education may substitute for industry experience or vice versa.” Pet. 12–13 (citing Ex. 1007 ¶¶ 30–34). We adopted Petitioner’s proposal at institution. See Decision 7–8. In its Response, Patent Owner “proposes that a person having ordinary skill at the time of invention—August 23, 2005—in the relevant art would be one with a bachelor’s degree in electrical engineering, computer sciences, or telecommunications, along with three to five or more years of practical experience in the field” and that “[a] combination of more experience in the field and less education or more education and less experience in the field would also suffice.” PO Resp. 8 (citing Ex. 2001 ¶ 27). Patent Owner asserts that “[a]lthough [its] proposed level of skill in the art is similar to Petitioners’ proposal, Patent Owner includes the qualification that a combination of more experience in the field and less education, or more education and less experience in the field would also suffice.” Id. The parties do not argue that the formulation of the level of skill in the art affects any issue in this case, and we maintain our adoption of Petitioner’s formulation, which we find to be generally consistent with the disclosures of the ’443 patent and the prior art, and which includes that “more education may substitute for industry experience or vice versa.”” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“length indicator” to mean “a single length indicator that provides two pieces of information: (1) that a first data octet of the protocol data unit is a first octet of a first service data unit; and (2) that at least one other octet of the protocol data unit is the last octet of another service data unit.” See Prelim. Resp. 9–10. We agreed with Patent Owner that the specification’s description of a single length indicator that conveys both types of information and the arguments made during prosecution that the claims required a “single LI” or “the same length indicator” to include both types of information were sufficient to support a construction that required a single length indicator to include both pieces of information. See Decision 9. Although it did not propose a construction in the Petition, Petitioner now argues that “the claim language uses the indefinite article ‘a’ to modify ‘length indicator’” and that “[p]recedent is well settled that ‘an indefinite article ‘a’ or ‘an’ in patent parlance carries the meaning of ‘one or more’ in open-ended claims containing the transitional phrase ‘comprising.’” Pet. Reply 5 (citing KCJ Corp. v. Kinetic Concepts, Inc., 223 F.3d 1351, 1356 (Fed. Cir. 2000)). While we agree with Petitioner that “a” may mean “one or more,” that simply means that the addition of more length indicators would not be excluded from the scope of the claim. Petitioner does not explain, and we do not see, how that affects the meaning of “length indicator” itself and, for the reasons argued by Patent Owner and adopted at institution, we maintain the earlier construction of “length indicator” as “a single length indicator that provides two pieces of information: (1) that a first data octet of the protocol data unit is a first octet of a first service data unit; and (2) that at least one other octet of the protocol data unit is the last octet of another service data unit.” See Decision 8; Prelim. Resp. 9–12; PO Resp. 10–13. slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“We also observe that, although Patent Owner characterizes this issue as one based on “teaching away” (see, e.g., PO Resp. 3; PO Sur-Reply 15– 16), the argument is not about teaching away because Patent Owner is not pointing us to any specific teaching in the prior art, or elsewhere, that would counsel against the proposed modification. Patent Owner is not arguing that something in the prior art disparages or discourages the use of one bit of an LI as a flag. Instead, Patent Owner is arguing that one of skill in the art would not pursue the Qualcomm approach because to do so would mean accepting other drawbacks that would flow from the use of the flag. In any event, we credit Patent Owner’s evidence that dedicating a bit of the LI for use as a flag would reduce the length that could be represented by the remaining bits of the LI and cause SDUs to be divided into more PDUs. See, e.g., Ex. 2005 ¶¶ 30, 32. However, the record also shows that use of the flag would provide a specific advantage, as described in Qualcomm. See Ex. 1006, 3; Ex. 1007 ¶ 253. This is the motivation advanced by Petitioner which, notably, Patent Owner does not dispute. We conclude that, even if Patent Owner is correct that the proposal in Qualcomm would reduce the permitted PDU size from 128 octets to 64, the change would merely be something a skilled artisan would need to weigh against the advantages that the Qualcomm technique would provide. Patent Owner may be correct that the reduced lengths would, in the end, render the modified system unsuitable for certain applications or for adoption in a standard. That would not, however, make the modification nonobvious, particularly where the exact change proposed in the combination was suggested by individuals working in the field, as evidenced by Qualcomm itself.7 The record shows that at least some of those working in the field, at the time of the invention, believed that the advantages of Qualcomm’s approach would outweigh the reduced lengths.” slip op. at 20
- BurdenMixed
“In TS25.322, the value “0000000” is a predefined, special value used to indicate that “[t]he previous RLC PDU was exactly filled with the last segment of an RLC SDU and there is no ‘Length Indicator’ that indicates the end of the RLC SDU in the previous RLC PDU.” See Ex. 1005, 36–37. However, although Qualcomm specifically contemplates implementing its flag scheme by “[r]e-arrang[ing] special LI values as they are now coded on less number of bits” (Ex. 1006, 4), the Petition did not argue a combination that includes modification of the special LIs for the independent claims. Instead, Petitioner relied on Qualcomm’s proposal to modify ordinary LIs that indicate the end of SDUs. See, e.g., Pet. 71–72 (describing and illustrating modification of the LI that identified the end of SDU 1: “[t]he green modified LI indicates that a first data octet of PDU is a first octet of SDU1 and another octet of the PDU is the last octet of SDU1”); Ex. 1007 ¶¶ 261–262. Petitioner’s argument with respect to these claims is thus not consistent with the argument it advanced for the independent claims from which these claims depend. Petitioner cannot reasonably rely on one type of prior art LI as the “length indicator” of claim 1, but then shift to a different type of prior art LI when addressing the very same “length indicator” recited in a dependent claim. Moreover, Petitioner fails to explain how or why the special LI “0000000” that is used to indicate the layout of the previous PDU could reasonably be used to also indicate the layout of the current PDU in which the LI appears. For example, if the previous PDU did not meet the condition identified by the “0000000” special value, then the LI would not appear in the next PDU even if that next PDU had a first SDU that ended in that PDU. For these reasons, Petitioner has not provided sufficient explanation or argument to establish obviousness of claims 6 and 21.9” slip op. at 28
Patent outcomesUS 7,894,443 mixedClaim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,894,443 - Clearone, Inc. v. Shure Acquisition Holdings, Inc.Some claims unpatentablePTAB · Aug 14, 2020 · IPR2019-00683 · APJ Christa P Zado · IPR · Final written decision
Claims 1–5, 7–33, and 35–40 are unpatentable; claims 6 and 34 were not shown unpatentable. The motion to amend was granted for substitute claims 57–67.
RulingsFinal written decision- ExcludeMotion to exclude, deniedMixed
“establish that it is entitled to the relief requested—namely, that the material sought to be excluded is inadmissible under the Federal Rules of Evidence. See 37 C.F.R. §§ 42.20(c), 42.62(a). For the reasons discussed below, Petitioner’s Motion is dismissed as moot, and Patent Owner’s Motion is denied-in-part and dismissed-in-part.” slip op. at 10
- Skill levelOther
“C. Level of Ordinary Skill in the Art To establish the level of ordinary skill in the art, we look to various” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“For the foregoing reasons, we determine the term “rotationally offset” slip op. at 23
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“date it becomes publicly accessible. In re Hall, 781 F.2d 897, 899 (Fed. Cir. 1986). “Whether a reference qualifies as a printed publication under § 102 is a legal conclusion based on underlying fact findings.” Acceleration Bay, LLC v. Activision Blizzard Inc., 908 F.3d 765, 772 (Fed. Cir. 2018). “A reference is considered publicly accessible if it was ‘disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art, exercising reasonable diligence, can locate it.’” Id.” slip op. at 24
Patent outcomesUS 9,565,493 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 9,565,493 - Flir Systems, Inc. / Flir Maritime US, Inc. (F/K/A Raymarine, Inc.) v. Garmin Switzerland GmbHSome claims unpatentablePTAB · Jul 10, 2018 · IPR2017-00946 · APJ Scott B Howard · IPR · Final written decision
Claims 28, 29, and 45 were held unpatentable; claims 1–7, 12–23, 25–27, and 41–44 were not shown unpatentable. Substitute claims 73 and 74 were allowed.
RulingsFinal written decision- BurdenFwd mixedMixed
“C. Legal Principles 1. Anticipation A patent claim is unpatentable under 35 U.S.C. § 102 if “the four corners of a single, prior art document describe every element of the claimed invention, either expressly or inherently, such that a person of ordinary skill in the art could practice the invention without undue experimentation.” Advanced Display Sys., Inc. v. Kent State Univ., 212 F.3d 1272, 1282 (Fed. Cir. 2000). “A single prior art reference may anticipate without disclosing a feature of the claimed invention if such feature is necessarily present, or inherent, in that reference.” Allergan, Inc. v. Apotex Inc., 754 F.3d 952, 958 (citing Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003)). Moreover, the reference must also “disclose[] within the four corners of the document not only all of the limitations claimed but also all of the limitations arranged or combined in the same way as recited in the claim.” Net MoneyIN, Inc. v. Verisign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). However, “the reference need not satisfy an ipsissimis verbis test.” In re Gleave, 560 F.3d 1331, 1334 (Fed. Cir. 2009). We analyze the ground based on anticipation in accordance with the above-stated principles.” slip op. at 22
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“and agree with Patent Owner that the terms “re-routing the course” and “re-route the course” mean “to change at least a portion of the route of the course relative to a previous routing.” That is, there must be a first routing of a course and that routing must be changed by performance of the marine route calculation algorithm to avoid preselected conditions by identifying one or more non-user selected waypoints. The construction is consistent with the words of the claims. The claims do not merely require routing a course, but “re-routing the course.” The ordinary meaning of the prefix “re” is that something is being done again. See Tr. 18 (Petitioner agreeing that “if you put R-E in front of a word, normally that means it’s occurring a second time”). Although the claims do not explicitly recite both an original “routing” of a course that is changed by “re-routing the course,” the original “routing” is implicitly required by the use of the prefix “re.” See Tr. 34 (Patent Owner agreeing that although the claims do not explicitly require an initial routing, the initial routing is implicit in the use of “re-routing”), 44–45 (Petitioner agreeing that “re-routing” ordinarily implies an initial routing).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“proposed construction of “course” as “the path of intended travel of a craft with respect to the earth.” Instead, we need only focus on the words recited in the claim. Claim 1, which is representative, recites that performing the marine route calculation algorithm to “route a course between a first location and the potential waypoint avoiding the preselected conditions,” where such performance includes “identifying one or more non-user selected waypoints.” Ex. 1001, claim 1. The other independent claims recite similar limitations. See Ex. 1001, claims 12, 20, 27. Based on the limitation recited in the claim, the broadest reasonable interpretation of routing a “course” encompasses the identification of one or more non-user selected waypoints between a first location and a potential waypoint. No further construction is necessary for purposes of this Decision.” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We are persuaded by Petitioner’s argument that the person of ordinary skill in the art need not have first-hand experience with marine navigation devices and systems. Pet. Reply 25–26. The ’703 patent explicitly defines “marine navigation” broadly, noting that “the use of the word ‘marine’ in the embodiments of the present invention (including the claims) could be replaced with the phrase ‘non-street based.’” Ex. 1001, 1:57–67 (emphasis added). Such non-street based navigation is broad enough to encompass avionic navigation. See Pet. Reply 25–26; cf. Ex. 1003, 4–7 (demonstrating Dr. Braasch’s experience in avionic navigation). We find that Petitioner’s definition is supported by the testimony of its expert, Dr. Braasch, and, for the reasons stated above, we are not persuaded that the person of ordinary skill in the art necessarily would have had first-hand experience in marine—as opposed to non-street based— navigation. We, therefore, determine, based on the complete record, that Petitioner’s proposed definition correctly states the level of ordinary skill in the art, and we apply it for purposes of this Decision.7, 8” slip op. at 24
Patent outcomesUS 7,268,703 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 7,268,703
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.