- Uatp IP LLC v. Slick Slide LLCInstitutedPTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution
The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Skill levelSkill level patent owner adoptedOther
“On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · GrahamPatents in suitUS 11,998,854 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Institution
Instituted IPR of claims 1–10 on all petition grounds; Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, Rossi, and Castellani.
RulingsInstitution decision- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“second German priority application do not disclose every limitation of independent claims 1 and 7 of the ’430 patent. Figure 1 does not depict a barcode under the flange, but rather the use of raised areas on the side of the capsule that act as an identifier. Ex. 1047, Fig. 1. Figure 2, coupled with its associated description, might suggest that the barcode could be on the portion of the base element facing away from the membrane,9 but this figure does not disclose many of the other elements of the claim, including holding arms, a drop box, annular convexity and concavity, and a pump to supply water to the single-serve capsule. Pet. 41; Ex. 1047, 9:21–24, Fig. 2. We also determine that Patent Owner does not sufficiently demonstrate that Figures 16–18 of the second German priority application provide adequate disclosures showing that the inventors were in possession 9 We question whether the second German priority application supports placing a barcode under the flange. The application states that the barcode could “be provided on that side of the peripheral region of the basic element which is directed away from the membrane.” Ex. 1047, 9:21–24. This statement is rather ambiguous as to where the “peripheral region” is that is “directed away from the membrane.” The text goes on to explain, however, that “[t]his barcode,” i.e., the barcode that is “directed away from the membrane,” “is read by a detector 13,” which in Figure 2 is oriented to read a barcode on the top surface of the flange. Id. at 9:25–26, Fig. 2. This suggests that the barcode is not on the bottom side of the flange and that arrow 15 is pointing to the outer portion of the peripheral region that is not covered by the membrane, and not necessarily the bottom of the flange. First, the second German priority application describes the use of “an identifier” that is read by a “sensor/detection means” and then compared to a stored identifier. Ex. 1047, 2:29–31. In Figure 2 the identifier may be a barcode and the detection means is detector 13. Id. at 9:11–26. In Figures 16–18, however, element 2.4.2 is not an identifier, but rather a “a form-fitting and/or friction-fitting means and/or a detection means.” Id. at 12:22– 24 (emphasis added). As such, it is unclear how this disclosure would demonstrate possession of the disputed claim limitation, when combined with the other limitations of claims 1 and 7 as a whole. Second, it is not evident that the toothed rings of Figures 16–18 are on the underside of the flange, as asserted by Patent Owner. Prelim. Resp. 42 (asserting that a barcode “could be located on the bottom side of the flange instead of the toothed ring”); Prelim. Sur-reply 4. The second German priority application states that the “form-fitting and/or friction-fitting means and/or detection means 2.4.2” is located in the “outer region” of the peripheral region 2.4. Ex. 1047, 12:22–24. We are directed to no evidence that this “outer region” is on the bottom of the flange, and Figures 16–18 each appear to depict means 2.4.2 on, or forming, the outer circumference of the flange.11 Id. at Figs. 16–18, 6:8–11 (noting that the toothed ring is provided “on the outer circumference of the periphery”). 10 The parties dispute whether Figure 16 of the second German priority application discloses annular convexity and concavity. Pet. 42–43; Prelim. Resp. 45–46; Prelim. Reply 4–5; Prelim. Sur-reply 4. At most, the parties identify a material issue of fact with respect to these two claim elements that is best resolved on a full trial record. 11 At first blush, Figure 17A appears to show means 2.4.2 under a portion of element 27 of the capsule. Ex. 1047, Fig. 17A; Prelim. Sur-reply 4 depicted in Figures 16–18, which rely on toothed rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. The second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments, the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22–27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). Patent Owner does not sufficiently explain how a barcode could replace means 2.4.2 in these embodiments and still retain the capsule within the device or allow the capsule to enter the insertion shaft.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“First, Yoakim expressly states that the capsule may use a “barcode,” and the plain and ordinary meaning of this term is a code that satisfies the construction adopted by the district court. To the extent Patent Owner has reason to believe that Yoakim does not apply the plain and ordinary meaning of the term “barcode,” and that one of ordinary skill in the art would have understood this fact, it is encouraged to present such evidence during trial. Second, in this obviousness inquiry the question is not whether a person of ordinary skill in the art is more likely to adopt a barcode or a bitcode, but whether one of ordinary skill in the art would have seen a benefit to applying the “barcode” of Yoakim under the flange of the capsule. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021) (“Our case law is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’”). On that point, Jarisch expressly discloses the benefits of doing so. Ex. 1005 ¶ 22 (noting that applying the code at the bottom of the rim lowers the risk of the code becoming unreadable). As such, we determine that Petitioner sufficiently identifies where Yoakim discloses a barcode and explains why one of ordinary skill in the art would have placed such a “barcode” on the bottom of the capsule’s flange.” slip op. at 27
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“Information Disclosure Statement (IDS) during prosecution of the ’430 patent and that Rossi and Castellani were mentioned in the inter partes reviews that were cited on the IDS. Pet. 19; Prelim. Resp. 23. We need not determine whether Part 1 of the Advanced Bionics framework is satisfied based on these disclosures, however, as Part 2 of the analysis, which we address below, is dispositive. a) Factor (c)—the extent to which the asserted art was evaluated during examination, including whether the prior art was the basis for a rejection The Examiner did not issue any rejections during prosecution of the ’430 patent. Ex. 1002, 232–234. As the reasons for allowance, the Examiner stated: [A]llowance of claims 1 and 21–29 is indicated as none of the cited prior art discloses or suggests the flange comprising a top side and an opposing bottom side; a cover that is fastened to the top side of the flange to close the cavity; and an identifier provided on the bottom side of the flange, the identifier being a barcode, wherein the beverage machine, by reading or detecting the identifier with the sensor/detector, is configured to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine, and only if the beverage machine determines that the single-serve capsule belongs to the group of single serve capsules operable for use with the beverage machine is the pump controlled to push the water into the single-serve capsule. Id. at 233. In arriving at this conclusion, the Examiner did not cite or discuss the disclosures of Yoakim, Jarisch, Rossi, or Castellani. Id. at 232–234. Yet, these references appear, based on the current record, to expressly teach or allowance, including a “flange comprising a top side and an opposing bottom side” (Ex. 1004 ¶ 197, Fig. 6); “a cover that is fastened to the top side of the flange to close the cavity” (Ex. 1004 ¶¶ 128–129, 197, 414); “an identifier provided on the bottom side of the flange” (Ex. 1005 ¶ 22) that is “a barcode” (Ex. 1004 ¶¶ 496, 525); and “reading or detecting the identifier with the sensor/detector . . . to determine if the single-serve capsule belongs to a group of single serve capsules operable for use with the beverage machine” (Ex. 1004 ¶¶ 25, 192, 477, 494–496, 525; Ex. 1005 ¶ 82; Ex. 1041, 3, 11). As such, to the extent the asserted combination of prior art references was evaluated during prosecution of the application that matured into the ’430 patent, we determine that such evaluation was minimal.” slip op. at 37
- Other 314aDecided for petitioner
“B. 35 U.S.C. § 314(a) Patent Owner contends that “[t]he parties have been embroiled in disputes involving substantive claims for infringement for both the ’430 Patent and the Jarisch 929 reference,” and “it is unnecessary to open up yet another front in this dispute.” Prelim. Resp. 68–69. As such, Patent Owner requests that we deny institution under 35 U.S.C. § 314(a). Id. Patent Owner directs our attention to no case in which the Director has exercised discretion to deny a petition merely because the same patent was the subject of a co-pending district court infringement action. Indeed, 35 U.S.C. § 315(b) specifically contemplates such a scenario. Accordingly, we decline to exercise discretion to deny the Petition under 35 U.S.C. § 314(a).” slip op. at 40
§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 11,230,430 - Nespresso USA, Inc. v. K-Fee System GmbHInstitutedPTAB · Sep 13, 2023 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Institution
Instituted IPR on claims 1–16 because Petitioner showed a reasonable likelihood that the claims would have been obvious over Yoakim, Jarisch, and Rapparini.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, Petitioner demonstrates a reasonable likelihood of prevailing with respect to claims 1–16 of the ’923 patent. Accordingly, we institute an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995). One may show support for the claims of a later application by showing that a single, earlier application provides written description support for the claims. PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); Studiengesellschaft Kohle, MBH v. Shell Oil Co., 112 F.3d 1561, 1564 (Fed. Cir. 1997) (noting that a patentee “cannot distinct previous applications”). Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artPriority date, deniedDecided for petitioner
“Once Petitioner identifies a prior art reference with an effective filing date prior to that of the challenged patent, the burden of production to show entitlement to the benefit of the filing date of an earlier filed application shifts to Patent Owner. See In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (“a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Patent Owner may show possession of the invention through “such descriptive means as words, structures, figures, diagrams, formulas, etc., that fully set forth the claimed invention.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). “Although the exact terms need not be used in haec verba, . . . the specification must contain an equivalent description of the claimed subject matter. A description which renders obvious the invention for which an earlier filing date is sought is not sufficient.” Id.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“7. Analysis: Reasons to Combine the References Petitioner shows sufficiently that Yoakim, Jarisch and Rapparini are “analogous art in the field of portion capsule beverage extraction, each disclosing an invention that may be applied in automatic coffee/espresso machines.” Pet. 43. “Yoakim and Jarisch both improve the optimization of beverage parameters in a single-serve brewing system, and use optical codes read by the machine to achieve this.” Id. “Rapparini further improves the the wall of the capsule body like those used in Yoakim and Jarisch.” Id. at 43–44; see id. at 50–51, 53–54 (Petitioner’s further argument that Rapparini discloses “an optimized capsule structure that is stiffer and more stable” by virtue of radially spaced and vertically oriented ribs and grooves, where the vertically oriented grooves are free from extending entirely to the bottom region of the capsule). Petitioner directs us to additional evidence tending to establish that an ordinarily skilled artisan would have been prompted to modify Yoakim’s device, to include the code placement of Jarisch and the grooves and ribs of Rapparini, to arrive at the claimed invention with an expectation of success. Id. at 44–48.” slip op. at 27
§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites PhillipsPatents in suitUS 10,994,923 - PTAB · Aug 30, 2023 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Institution
The Board instituted IPR on claims 19–61 and 63–81 on all petitioned grounds, finding a reasonable likelihood that Doud anticipates claims 19–61 and 63–75.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine that Petitioner demonstrates a reasonable likelihood of prevailing with respect to at least one claim of the ’740 patent. Accordingly, we grant institution of an inter partes review.” slip op. at 2
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“the application describe the claim limitations exactly,” the application must demonstrate to persons of ordinary skill in the art that the applicants invented a composition including those limitations. Wertheim, 541 F.2d at 262. On its face, the range of “at least 0.01 wt. %” encompasses a range that is broader than 0.01–35 wt. %, and Patent Owner does not sufficiently explain why a person of ordinary skill in the art would understand from merely a disclosure of 35 wt.% that the inventors were in possession of the entire claimed range for copper, cobalt, or nickel in the magnesium composition.” slip op. at 11
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedOther
“On this record, the term “at least 0.01 wt. %” in the ’740 patent encompasses values for nickel, copper, and cobalt that are higher than the 35 wt. % (nickel and copper) and 20 wt. % (cobalt) limits outlined in the parent and grandparent applications. Accordingly, we determine that there is a reasonable likelihood that claim 19 of the ’740 patent is not entitled to the benefit of the filing dates of its priority applications. Challenged claims 20–61 and 63–75 depend from claim 19 and there is no argument presented that these claims have independent written description support in Doud. For example, there is no evidence presented that any of these dependent claims narrow the ranges for each of copper, nickel, and cobalt recited in in the ’295 application for these claims.7 Accordingly, for purposes of this Decision, we apply Doud as prior art to challenged claims 19–61 and 63–75.” slip op. at 12
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“as the ’740 patent. For example, Doud and the ’740 patent both disclose a method of forming a novel magnesium composite that includes melting an AZ91D magnesium alloy containing 90 wt. % magnesium, 9 wt. % aluminum, and 1 wt. % zinc. Ex. 1005 ¶¶ 45, 47; Ex. 1001, 21:43–51, 22:48–53, 33:32–43, 34:9–12. To this alloy is added either 7 wt. % nickel or 10 wt. % copper. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:48–51, 22:53–56, 33:35–36, 34:12–13. These additives are mixed in the magnesium alloy at a temperature that is less than the melting point of copper or nickel, and the casting is then cooled. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:51–54, 22:56–58, 33:35, 34:12-13. Doud reports that nickel and copper, when added to molten magnesium, will form Mg2Ni and CuMg2 intermetallic, galvanically-active, in situ precipitates. Ex. 1005 ¶¶ 12–13. Doud discloses that the dissolution rate of the resulting casting material is either 325 mg/cm2-hr (nickel) or 50 mg/cm2-hr (copper) in a 3% KCl solution at 90° C. Ex. 1005 ¶¶ 45, 47, 53, 57; Ex. 1001, 21:60–62, 22:61–63, 33:41–43, 34:15–17. Doud also discloses that the average particle diameter of the additives used in the invention is generally “at least about 0.1 microns” and “typically no more than about 500 microns.” Ex. 1005 ¶ 6. Petitioner explains how the identified disclosures of Doud anticipate independent claim 19. Pet. 39–40. Petitioner also identifies where the limitations of dependent claims 20–61 and 63–75 are disclosed in Doud. Id. at 41–45. Patent Owner does not address Petitioner’s anticipation arguments with respect to claims 19–61 and 63–75, apart from arguing that Doud is not prior art to these claims. Prelim. Resp. 27–39. demonstrates a reasonable likelihood that claims 19–61 and 63–75 are anticipated by Doud.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 10,689,740 - PTAB · Jun 20, 2023 · PGR2023-00008 · APJ Kristina M Kalan · PGR · Institution
The Board instituted post-grant review of claims 1–13 on all petitioned grounds, finding it more likely than not that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“To institute post-grant review, we must determine that the information presented in the Petition, “if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one of the challenged claims of the ’624 patent is unpatentable. Thus, we institute post-grant review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“evaluated the subject matter of Riis during examination of the ’624 patent, we agree that Riis was before the Office, as discussed in connection with our analysis of the first part of the Advanced Bionics framework, above. Examiner T presumably was aware of Riis by virtue of having initialed an IDS containing Riis in the ’624 patent’s application and also by virtue of having initialed an IDS containing Riis in the ’067 Application, but Examiner T did not apply Riis in connection with the examination of the ’624 patent. On this record, Patent Owner also fails to show that the claims of the child application leading to the ’624 patent are substantially similar to those of the parent ’814 patent in which Examiner S considered Riis, and, thus, consideration of Riis during the prosecution of the ’814 patent does not equate to consideration of Riis during the prosecution of the ’624 patent. Regarding Patent Owner’s argument (2) that Petitioner fails to sufficiently show how the Examiner erred in evaluating the prior art, we find Petitioner’s arguments demonstrate that Examiner T, the examiner of the ’624 patent, did not apply Riis (or Wypych or Tatarka) during the examination of the’624 patent. As Petitioner argues, the error lies in that “the Examiner failed to consider the relevance of Riis as it applied to the pending method claims,” because although “Riis was considered during examination of the parent ’999 application, Riis was not similarly considered during examination of the ’018 application which led to the ’624 patent.” Pet. 76–77. We determine that the circumstances here demonstrate that the Examiner erred in evaluating the prior art.” slip op. at 12
- PTAB / AIA Trials › Real party in interest / privityNot reached
“35 U.S.C. § 322(a)(2) to deny institution, arguing that the Petition fails to identify every RPI. Prelim. Resp. 10–11, 56–60. Patent Owner argues that the Petition “should also have identified its parent corporation, Huhtamäki Oyj . . . as well as the related corporation Huhtamaki, Inc. . . . as RPIs to comply with the statutory requirements for a PGR.” Id. at 10. On this record, we determine that we need not address whether Huhtamäki Oyj and Huhtamaki, Inc. are unnamed RPIs because, even if they were, it would not create a time bar or estoppel under 35 U.S.C. § 325. See SharkNinja Operating LLC v. iRobot Corp., IPR2020-00734, Paper 11 (PTAB Oct. 6, 2020) (precedential); Lumentum Holdings, Inc. v. Capella Photonics, Inc., IPR2015-00739, Paper 38 at 6 (PTAB Mar. 4, 2016) (precedential) (Board’s jurisdiction to consider a petition does not require a “correct” identification of all RPIs in a petition); see also Blue Coat Sys., Inc. v. Finjan, Inc., IPR2016-01444, Paper 11 at 10 (PTAB July 18, 2017) (“evidence [of failure to identify all RPIs] is, at best, suggestive regarding an issue that is not jurisdictional”); Mayne Pharma Int’l Pty. Ltd. v. Merck Sharp & Dohme Corp., 927 F.3d 1232, 1240 (Fed. Cir. 2019) (“[I]f a petition fails to identify all real parties in interest . . . the Director can, and does, allow the petitioner to add a real party in interest.” (quoting Wi-Fi One, LLC v. Broadcom Corp., 878 F.3d 1364, 1374 n.9 (Fed. Cir. 2018) (en banc))). Here, notwithstanding the arguments devoted to the RPI issue in the Preliminary Response, Preliminary Reply, and Preliminary Sur-Reply, we are not persuaded that Petitioner is barred or estopped from this proceeding, or that Petitioner purposefully omitted Huhtamäki Oyj or Huhtamaki, Inc. to gain some advantage. As Petitioner argues, the “RPI analysis is not necessary at institution, because Patent Owner has not alleged Petitioner would be time barred or otherwise estopped based on unnamed RPIs.” Prelim. Reply 5 (quoting SharkNinja, IPR2020-00734, Paper 11 at 18). As SharkNinja states, certain Board decisions go through extensive analysis to determine whether parties should have been named as RPIs, whereas other Board decisions determine that “such a lengthy exercise is unnecessary for the purposes of rendering a decision on institution of trial.” SharkNinja, IPR2020-00734, Paper 11 at 19. Here, as in SharkNinja, we find the latter approach better serves the interest of cost and efficiency. Thus, at this time and on this record, we will not consider whether Huhtamäki Oyj or Huhtamaki, Inc. must be named as RPIs.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“of the invention “would have had a relevant technical degree in Chemical Engineering, Polymer Science, Materials Science, or the like, and 2–3 years of experience in laminate or film manufacture or similar packaging manufacture and that less experience may be necessary with additional education and vice versa.” Pet. 17 (citing Ex. 1003 ¶¶ 66–72). In its 4 Neither Patent Owner nor Petitioner appear to present any evidence directed to secondary considerations. See generally Pet.; Prelim. Resp.; Prelim. Reply; Prelim. Sur-Reply. Preliminary Response, Patent Owner does not contest Petitioner’s asserted level of ordinary skill in the art. See generally Prelim. Resp. We adopt Petitioner’s definition, which is consistent with the level of skill in the art at the time of the invention as reflected by the prior art and the ’624 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 17
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham · NautilusPatents in suitUS 11,260,624
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.