• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Tesla, Inc. v. Iqar Inc.All claims unpatentable
  PTAB · Sep 18, 2025 · IPR2024-00630 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–16 are unpatentable as anticipated by Koebler and obvious over Koebler alone and in combination with other references.

  RulingsFinal written decision

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995) (citing 35 U.S.C. § 120). Section 112 requires, inter alia, that the specification contain a written description of the claimed invention. 35 U.S.C. § 112(a). In determining whether the written description requirement is met, we consider “whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). This analysis requires “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Id. Thus, “the level of detail required to satisfy the written description requirement varies depending on the nature and scope of the claims and on the complexity and predictability of the relevant technology.” Id. For example, the analysis must consider “the existing knowledge in the particular field, the extent and content of the prior art, the maturity of the science or technology, [and] the predictability of the aspect at issue.” Id. (alteration in original) (quoting Capon v. Eshhar, 418 F.3d 1349, 1359 (Fed. Cir. 2005)). “While a prior application need not contain precisely the same words as are found in the asserted claims, the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008) (citations omitted); see also Purdue Pharma LP v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (“In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.”). However, “it is the specification itself that must demonstrate possession. And while the description requirement does not demand any particular form of disclosure . . . , a description that merely renders the invention obvious does not satisfy the requirement.” Ariad, 598 F.3d at 1352 (citations omitted); see also Lockwood v. Am. Airlines, 107 F.3d 1565, 1572 (Fed. Cir. 1997) (“While the meaning of terms, phrases, or diagrams in a disclosure is to be explained or interpreted from the vantage point of one skilled in the art, all the limitations must appear in the specification. The question is not whether a claimed invention is an obvious variant of that which is disclosed in the specification. Rather, a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.”).” slip op. at 7

  • Skill levelSkill level board ownDecided for petitioner

    “The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (quoting Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007)). “The patent’s purpose can also be informative.” Id.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “Initially, we note that, although Petitioner presents a definition for “traction” in its Reply (see Pet. Reply 10), Dr. Morellas agreed with Patent Owner’s proposed interpretation during his deposition: Q. What would a person having ordinary skill in the art understand the word “traction” to mean? A. It would mean the grip that the -- that the tire has with the road. Q. So when the tire is gripping the road, the vehicle will have traction; correct? A. Correct. Q. But if the wheels are spinning freely and not gripping the road, the vehicle has no traction; correct? A.· Correct. Ex. 2031, 36:8–17. Accordingly, we adopt Patent Owner’s interpretation of “traction” to be a measure “of the friction between the vehicle’s drive wheels and the road surface” such that “a vehicle’s wheels have ‘traction’ when wheel rotation acts to propel the vehicle along the roadway” and “[t]he vehicle’s wheels lose ‘traction’ when they spin freely relative to the road and thus are no longer acting to propel the vehicle along the roadway.” See PO Resp. 27; see also Tr. 18:4–5 (Petitioner’s counsel stating that “the ultimate disposition doesn’t matter which definition [of ‘traction’ the Board] adopt[s]”).” slip op. at 24

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “2. Anticipation “Under 35 U.S.C. § 102 a claim is anticipated ‘if each and every limitation is found either expressly or inherently in a single prior art reference.’” King Pharm., Inc. v. Eon Labs, Inc., 616 F.3d 1267, 1274 (Fed. Cir. 2010) (quoting Celeritas Techs. Ltd. v. Rockwell Int’l Corp., 150 F.3d 1354, 1360 (Fed. Cir. 1998)). “Anticipation requires the presence in a single prior art disclosure of all elements of a claimed invention arranged as in the claim.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010) (quoting Connell v. Sears, Roebuck & Co., 722 F.2d 1542, 1548 (Fed. Cir. 1983)). A reference inherently discloses an element of a claim “if that missing characteristic is necessarily present, or inherent, in the single anticipating reference.” Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003) (citing Cont’l Can Co. USA, Inc. v. Monsanto Co., 948 F.2d 1264, 1268 (Fed. Cir. 1991)). “Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, 593 F.3d at 1332 (quoting Cont’l Can, 948 F.2d at 1269).” slip op. at 28

  Patent outcomesUS 10,850,616 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 10,850,616
• Innoscience (Zhuhai) Technology Company, Ltd / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01381 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–3 and 7–9 are unpatentable as obvious over Uemoto and Smith; the motion to amend is granted, and proposed substitute claims 13 and 14 are not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In order to determine whether an invention would have been obvious at the time the application was filed, we consider the level of ordinary skill in the pertinent art. Graham, 383 U.S. at 17. In assessing the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (quotation omitted). Petitioner contends a person of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering, chemical engineering, physics, or material science, or a closely related field, and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies.” Pet. 5–6. Petitioner contends “[a]dditional education could substitute for professional experience and vice versa.” Id. at 6. Patent Owner contends that a person of ordinary skill in the art would have had “at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” PO Resp. 7 (citing Ex. 2009 ¶ 82). Upon review of the evidence of record and the parties’ arguments, we adopt Petitioner’s definition of the person of ordinary skill in the art as it is consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art). We note, however, that the conclusions reached in this Decision would be the same under either proposed definition of the ordinarily skilled artisan. See Ex. 2009 ¶ 83 (Dr. Schubert testifying that his opinions would be the same under either proposed definition); Ex. 1033 ¶ 9 (Dr. Shealy testifying that the differences in proposed definitions of the ordinarily skilled artisan “would not change the outcome of the invalidity analysis in any material manner”); PO Resp. 7; Pet. Reply 1.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “compensated GaN layer above the barrier layer, and a gate contact above the compensated GaN layer.” Ex. 1001, 5:12–18. Petitioner contends the term “compensated” indicates that the step of compensating the GaN layer has already occurred, such that the term “compensated GaN layer” should be construed as a “‘[d]oped GaN layer formed with a step to passivate its impurities’ which is a ‘product-by-process’ limitation.”5 Pet. 12–14. And, because compensation with hydrogen was the “critical step” distinguishing the claims from the prior art, and because hydrogenation in as-grown III-nitride materials had been well known for over a decade by 2009, Petitioner contends “compensated” “cannot be interpreted as mere hydrogen presence in as-grown material, a well-known property of doped GaN.” Id. at 15. Patent Owner contends “compensated GaN material” should be construed as “a semiconductor GaN gate material in which one type of impurity (for example, donor) cancels the electrical effects of the other type of impurity (for example, acceptor).” PO Resp. 11 (citing Ex. 2009 ¶ 92) (emphasis added). Patent Owner contends this construction is consistent with the IEEE dictionary, which defines “compensated semiconductor” as 5 Given that product-by-process steps in a device claim are not entitled to patentable weight, Petitioner contends “the prior art only need show a material with passivated impurities to show unpatentability, not the step to achieve it.” Pet. 15–16. “[a] semiconductor in which one type of impurity or imperfection (for example, donor) partially cancels the electric effects of the other type of impurity or imperfection (for example, acceptor).” PO Resp. 14 (quoting Ex. 2004). Patent Owner contends its construction is also consistent with the written description of the ’294 patent, which explains that a compensated GaN material is part of the gate and includes a p-type impurity that imparts an electrical effect (i.e., conductivity), as well as a second impurity, e.g., hydrogen, that partially cancels the electrical effect of the p-type impurity, rendering the layer semi-insulating. Id. at 14–15 (citing Ex. 1001, 3:10–13, 3:43–45). On this record, we construe “compensated GaN layer” as “a GaN layer in which one type of impurity (for example, donor) partially cancels the electric effects of the other type of impurity (for example, acceptor).” This is consistent with the disclosures of the ’294 patent, the IEEE dictionary definition, and the construction ultimately adopted by the ITC. Ex. 2004, 3; Ex. 1049, 16–17 (ITC construing “compensated GaN layer” to mean “a GaN layer in which one type of impurity partially cancels the electrical effects of another type of impurity”); Ex. 1001, 3:43–45 (explaining that the compensated GaN layer of the ’294 patent is formed through the “passivation of a p-type impurity using hydrogen”). For the reasons set forth below, however, we decline to construe “compensated GaN layer” as a product-by-process claim term (as asserted by Petitioner), or to limit the compensated GaN layer to a gate material (as asserted by Patent Owner).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “There are two exceptions to the general rule that we apply the ordinary and customary meaning of a claim term: (1) when a patentee sets out a definition and acts as his own lexicographer, or (2) when the patentee disavows the full scope of a claim term either in the specification or during prosecution. See Thorner, 669 F.3d at 1365. The standards for lexicography and disclaimer, however, are “exacting.” Id. at 1366. There is no argument that the patentees acted as their own lexicographer to redefine the term “compensated GaN layer.” With respect to disavowal, a “patentee may demonstrate intent to deviate from the ordinary and accustomed meaning of a claim term by including in the specification expressions of manifest exclusion or restriction, representing a clear disavowal of claim scope.” Thorner, 669 F.3d at 1366 (quoting Teleflex, Inc. v. Ficosa N. Am. Corp., 299 F.3d 1313, 1325 (Fed. Cir. 2002)). As noted by Patent Owner, the title of the ’294 patent is, in part, “Compensated Gate MISFET” and much of the discussion of the ’294 patent is of a compensated GaN layer that is directly below the gate contact and above a barrier layer and operates in conjunction with the gate contact to control the on/off state of the transistor. PO Resp. 12–14. We are presented with insufficient argument or evidence to conclude, however, that these disclosures rise to the level of a disclaimer. For example, although the title of the ’294 patent is directed to a “Compensated Gate MISFET,” claim 1 is more broadly directed to “[a] column III Nitride transistor.” Ex. 1001, 5:12, code (54). Nor are we directed to an expression or statement of manifest exclusion in the ’294 patent that would serve to disclaim any “compensated GaN layer” that is not directly below the gate and/or that does not function in concert with the gate electrode to control the on/off state of the transistor. See Thorner, 669 F.3d at 1366. With respect to the stated goals of the invention, as noted by Patent Owner, one of the primary purposes of the compensated GaN layer of the ’294 patent is to reduce gate leakage and gate capacitance. Ex. 1001, 2:13– 19, 3:18–21 (“[U]sing a compensated semiconductor layer 38 leads to low gate leakage during device operation.”). We cannot use the goals of the invention, however, to rewrite the claims or insert terms that are not present. See Thorner, 669 F.3d at 1366. Moreover, the prior art of record indicates that a compensated GaN layer that is below the gate contact and above a barrier layer, but not part of the active gate structure, may also “decrease the leakage current between the gate and the drain.” Ex. 1006 ¶¶ 44 (“Even when a positive bias of 5 V or higher is applied to the gate electrode, no significant gate-leakage current is observed.”), 61. As such, evidence of record suggests that a person of ordinary skill in the art would have understood that one of the primary goals disclosed in the ’294 patent is achieved regardless of whether the compensated GaN layer is part of the gate, or simply in close vicinity to the gate. In view of the foregoing, we are not persuaded that the written description of the ’294 patent indicates that the “compensated GaN layer” must be part of the gate structure.” slip op. at 17

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “To be probative, Patent Owner must prove there is a nexus between the presented evidence and the merits of the claimed invention. See Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988). A rebuttable presumption of nexus applies when the “patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco, 851 F.2d at 1392). “That is, presuming nexus is appropriate ‘when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.’” Id. (quoting Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1072 (Fed. Cir. 2018)). If the praise is not limited to the features of the claimed invention, the patent owner may still prove nexus “by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. at 1373–74 (quoting In re Huang, 100 F.3d 135, 140 (Fed. Cir. 1996)). Patent Owner contends that the compensated gate of the ’294 patent “was a breakthrough invention and resulted in the first commercially viable enhancement-mode GaN transistor.” PO Resp. 60 (citing Ex. 2009 ¶¶ 192– 193, 197; Ex. 2021). Patent Owner further contends that this achievement required the counter-intuitive use of a compensated gate material in the gate structure, and represented “a technological leap that laid the foundation for viable enhancement-mode GaN transistors.” Id. at 61–62. For this achievement, Patent Owner contends the inventor, Dr. Alex Lidow, received the 2015 SEMI Award. Id. at 60 (citing Ex. 2021). Upon review of Patent Owner’s evidence and the parties’ arguments, we find that Patent Owner’s objective indicia evidence is entitled to little, if any, weight. The evidence of praise relied upon by Patent Owner is not clearly linked to the claimed invention or any particular product having each of the claimed features of the ’294 patent. Ex. 2021. For example, the 2015 SEMI award was provided to Dr. Lidow “for commercialization of GaN power devices.” Id. An article explaining the award indicates that “high cost” previously “limited [the] commercial success” of GaN technologies, but Dr. Lidow was able to overcome these issues, “from resolving packaging limitations to establishing a low-cost supply chain,” “through persistence.” Id. This praise is not demonstrably linked to the claimed invention or any particular device, and does not mention the use of a compensated gate, or any other relevant feature recited in the claims. In view of the foregoing, we determine that Patent Owner’s objective evidence of non-obviousness is entitled to little, if any, weight.” slip op. at 20

  Patent outcomesUS 8,350,294 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 8,350,294
• MPL Brands NV, Inc. v. Buzzballz, LLCInstituted
  PTAB · Jan 27, 2025 · IPR2024-01098 · APJ Cynthia M Hardman · IPR · Institution

  The Board instituted IPR on all challenged claims 1–6 based on all asserted grounds, finding a reasonable likelihood that Kick anticipates or renders them obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “We have authority under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the briefing and cited evidence of record in view of this standard, we institute an inter partes review. The following preliminary findings of fact and conclusions of law are made solely to determine whether to institute review. Any final decision will be based on the full trial record.” slip op. at 2

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “challenged claims 1, 2, and 6 lack adequate written description support in the ’934 application as filed. See Pet. 10–11. The specification, figures, and claims as originally filed do not disclose any volume limitations. See Ex. 1004 (’934 prosecution history), 1–17. Instead, the volume limitations recited in the challenged claims find their first support in Figure 7, which was filed over one month after the ’934 application was originally filed. Compare id. at 1–17, with id. at 34–56. The addition of new matter during prosecution of a patent application is prohibited. See 35 U.S.C. § 132(a) (“No amendment shall introduce new matter into the disclosure of the invention.”); see also 37 C.F.R. § 1.121(f); Manual of Patent Examining Procedure (“MPEP”) § 608.04. Therefore, we agree with Petitioner that “the new matter improperly added during the prosecution of the ’934 application cannot be considered part of the disclosure of the original, April 19, 2010 application and/or relied upon for claiming priority in subsequent applications.” Pet. 9.” slip op. at 21

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date, deniedDecided for petitioner

    “prosecution history), 34. We agree with Petitioner that “any claims in the subsequent applications that recite the new matter [are] entitled to, at the earliest, a priority date of February 25, 2020—the filing date of the ’195 application.” Pet. 10. As discussed above, challenged claims 1, 2, and 6 recite volume limitations that first find adequate support in Figure 7 of the ’195 application. Accordingly, on this record (and after consideration of Patent Owner’s arguments, discussed below), we determine that the priority date of the challenged claims is no earlier than the February 25, 2020, filing date of the ’195 application. Id. at 10–11. We agree with Petitioner that “Kick is prior art under 35 U.S.C. § 102(a)(1) with respect to the claims of the ’904 patent because it was published more than one year before the February 25, 2020, priority date of the challenged claims.” Pet. 16.” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “On this record, we find that the issues the parties raise regarding limitation [1z] are highly fact-intensive and implicate genuine issues of material fact that are more appropriately resolved on a fully-developed record. Accordingly, on this record we reserve judgment on these arguments, to allow the record to develop during trial.” slip op. at 30

  § 102 anticipation§ 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,738,904
• MPL Brands NV, Inc. v. Buzzballz, LLCInstituted
  PTAB · Dec 18, 2024 · PGR2024-00035 · APJ Cynthia M Hardman · PGR · Institution

  The Board instituted PGR on all asserted grounds after finding the patent eligible for PGR and each challenged claim more likely than not unpatentable under at least one obviousness ground.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level). However, we find some ambiguity in the last sentence of Petitioner’s proposal (“A POSITA could substitute additional education for industry experience and vice versa.”) because the reference to “additional education” is not tethered to relevant education. Accordingly, we modify the last sentence of Petitioner’s proposal to clarify that the additional education must be relevant. Thus, we restate that for purposes of this Decision, a person of ordinary skill in the art of the ’441 patent would have had: (i) an associate’s or bachelor’s degree in mechanical, industrial or manufacturing engineering and (ii) at least two to three years of practical experience with designing or manufacturing mechanical products such as food or beverage packaging. A POSITA could substitute additional relevant education for practical experience and vice versa. B. Post-Grant Review Eligibility As a threshold matter, we must determine whether Petitioner has” slip op. at 11

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateDecided for patent owner

    “In view of the evidence discussed above, we agree with Patent Owner that there is adequate written description support for a transparent container body such that a depression in the container base is “visible through at least a portion of the container body,” as recited in claims 9, 10, 15, and 16. Prelim. Resp. 9. Regarding Petitioner’s assertion that the ’441 patent does not disclose “a transparent/translucent liquid” (Pet. 7), we again disagree. As Patent Owner points out, “the ’441 Patent mentions beverages, such as ‘beer and soda,’ as liquids for which the claimed container would be suitable.” Prelim. Resp. 10 (quoting Ex. 1001, 1:25–27). Patent Owner demonstrates that a person of ordinary skill in the art “would have recognized that beer is typically see-through, or translucent.” Id. (citing Ex. 2012 (Till) ¶ 24 (discussing an inspection apparatus for bottles that “are filled with a transparent liquid (e.g. beer, table water, mineral water, wine etc.)”); Ex. 2013 (Schnuckle) ¶ 8 (noting “translucent to transparent liquids such as water, soda, juice, or the like”)). We agree with Patent Owner that the ’441 patent’s identification of “beer and soda as beverages the described and claimed container was intended to hold” provides adequate written description support “for having transparent or translucent liquids within the container.”12 Prelim. Resp. 10. For the reasons discussed above, on this record Petitioner has not demonstrated that claims 9, 10, 15, and 16 include subject matter having a November 10, 2023, priority date. Thus, Petitioner has not demonstrated that the ’441 patent is eligible for post-grant review under AIA § 3(n)(1)(A).” slip op. at 15

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “Patent Owner’s arguments are unavailing. As an initial matter, Mr. Kirkpatrick is opining about a design patent application, and Patent Owner has not established that Mr. Kirkpatrick possesses the education and experience of a designer of ordinary skill in the art of ornamental aspects of containers for storing liquids or solids. See Ex. 2001 ¶ 5 (implying that Mr. Kirkpatrick is a generalist whose experience with design patents is in preparing formal drawings of designs invented by others).17 For this reason alone, on this record we accord Mr. Kirkpatrick’s declaration little weight on the question of whether the ’195 parent application provides adequate written description support for originally-filed Figure 2 of the ’813 design application. See, e.g., Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022) (“To offer expert testimony from the perspective of a skilled artisan in a patent case . . . a witness must at least have ordinary skill in the art. Without that skill, the witness’ opinions are neither relevant nor reliable.”). Even if Mr. Kirkpatrick’s opinions were relevant, they would not change our conclusion regarding lack of adequate written description. Mr. Kirkpatrick attributes the differences between the drawings to “choices in drafting strategy of the respective illustrators,” such as how to use “contour lines to illustrate sloped surfaces” and how much detail to include for well-known features like pop-tops. See Ex. 2001 (Kirkpatrick Decl.) ¶¶ 19, 23–24, 28–32.18 These arguments are unavailing. First, there is no evidence of record indicating that the figures in the ’195 parent application and ’813 design application were created by different illustrators. Second, 17 Patent Owner also has not established that Mr. Kirkpatrick possesses the education and experience of a person of ordinary skill in the art of the ’441 patent, as we have defined it here. Supra Section II.A. 18 Mr. Kirkpatrick’s analysis of a photograph of a can submitted by the applicant during prosecution (see Ex. 2001 (Kirkpatrick Decl.) ¶¶ 25–32) is additionally unavailing because there is no evidence of record indicating that the patent illustrator(s) used this particular photograph or the depicted can to create the patent illustrations. we agree with Petitioner that even if different illustrators employ different drafting strategies, this “does not absolve Patent Owner’s responsibility not to add new matter.” Prelim. Reply 6.” slip op. at 28

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Because the ’441 patent is eligible for post-grant review, we turn to an analysis of whether the Petition demonstrates “that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). C. Petitioner’s Grounds of Alleged Unpatentability As noted above in Section I.E, Petitioner asserts four different obviousness grounds. At this stage of the proceeding, Patent Owner does not address the merits of Petitioner’s obviousness grounds. See generally Prelim. Resp. For the reasons discussed below, we determine that Petitioner has demonstrated that it is more likely than not that the challenged claims are unpatentable based on the asserted grounds.” slip op. at 34

  Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,932,441
• Maplebear Inc. D/B/A Instacart v. Consumeron, LLCAll claims unpatentable
  PTAB · Nov 20, 2024 · IPR2023-00865 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–19 are unpatentable under § 103 over Carr and Lauka, with additional references for the dependent-claim grounds, because the challenged claims lack priority support in the ’848 application.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Instacart submits that a person of ordinary skill in the art (“POSITA”) would have had “a bachelor’s degree in electrical engineering, computer engineering, computer science, or equivalent training, and approximately two years of experience working in the field of electronic commerce” and that “[l]ack of work experience can be remedied by additional education, and vice versa.” Pet. 27 (citing Ex. 1003 ¶¶ 22–25). Consumeron responds that one skilled in the art would have been “someone with a background in electrical engineering, computer science, or the like” and that “industry experience can make up for a lack of technical training, and more education can make up for a lack of industry experience.” PO Resp. 7 (citing Ex. 2016 ¶¶ 19–23). But, as Consumeron’s expert acknowledges, Consumeron’s proposed definition “is not materially different” from Instacart’s. See Ex. 2016 ¶ 22. Accordingly, while we adopt the level of skill in the art as defined by Instacart our findings and analysis would be the same under Consumeron’s proposal.” slip op. at 7

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “8 Consumeron argues Dr. Houh’s testimony should be given little weight because he “admitted he did not evaluate what the ’848 Application reasonably conveys to a skilled artisan.” Resp. 26 (citing Ex. 2011, 74:8– 76:6, 83:4–84:1, 92:22–95:5). We disagree. Dr. Houh’s testimony indicates that he properly considered what the ’848 application reasonably conveys to a POSITA. See Ex. 1003 ¶¶ 52, 56, 58, 61, 65. The portions of his cross-examination testimony cited by Consumeron do not suggest otherwise. For the reasons explained below, we credit Dr. Houh’s testimony over the competing interpretations offered by Consumeron and Dr. Mitzenmacher. 9 The dissent criticizes the majority’s analysis as “overly narrow” and too focused on the preferred embodiment. See Dissent 7–8. We disagree. Our analysis considers the entirety of the ’848 application, including all of the passages cited by Consumeron and the dissent.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

    “But it does not follow that an agent encountering a stock-out would necessarily respond according to the specific steps recited in claims 1 and 14.10 For example, instead of sending information about a replacement product, the agent could travel to another location to look for the same product, or notify the customer that the desired product could not be found and terminate the transaction. Because the ’848 application only contemplates scenarios where a product can be located, it does not describe the agent’s response in the event the identified product cannot be located or is unavailable, much less reasonably convey possession of a method comprising the specific, responsive steps in claims 1 and 14.11” slip op. at 17

  • Prior constructionPrior construction adoptedTerm construed petitioner constructionDecided for petitioner

    “construed the terms “acquisition request” and “acquiring” in our final written decision in the related 1357 IPR to encompass “not only a request for a delivery agent to shop for and purchase goods, but also a request for the agent to pick up or obtain pre-paid goods.” See 1357 IPR, Paper 35 at 11. It is undisputed that the ’465 patent at issue here and the ’835 patent at issue in the 1357 IPR are related and share essentially identical specifications, figures, and claim terms. See Pet. Reply 16; PO Resp. 38 n.6. Thus, for the same reasons as in our final written decision in the related 1357 IPR, we likewise determine here that Instacart’s construction of “acquisition request” is the correct one. See SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents ‘derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.’” (quoting NTP, Inc., v. Research in Motion, Ltd., 418 F.3d 1282, 1293 (Fed. Cir. 2005)). Consumeron provides no persuasive justification for us to depart from our prior reasoning in the related 1357 IPR.” slip op. at 23

  Patent outcomesUS 11,238,465 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips
  Patents in suitUS 11,238,465
• Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentable
  PTAB · Sep 10, 2024 · IPR2023-00485 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1–10 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, Rossi, and Castellani.

  RulingsFinal written decision

  • Skill levelSkill level board ownPetitioner expert creditedDecided for petitioner

    “have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products.” Pet. 31 (citing Ex. 1003 ¶ 40). In the Institution Decision, we preliminarily determined that a person of ordinary skill in the art “would have a bachelor’s degree in engineering plus five years of experience in design of mechanical beverage systems, or similar products, as well as experience with sensors for recognizing an identifier.” Inst. Dec. 8 (emphasis added). Neither party disputes this conclusion. PO Resp. 9; see generally Pet. Reply. As such, we adopt our preliminary definition of the ordinarily skilled artisan for purposes of this Final Written Decision.” slip op. at 8

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to at least “five years” or involved “experience with sensors for recognizing an identifier.” Inst. Dec. 8 (adopting Patent Owner’s own proposed definition of one of ordinary skill in the art); see Sur-reply 3–4 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3– 12, 102:20–104:9; Ex. 2017 ¶¶ 3–4, 8–10) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.10 See Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). The Federal Circuit has explained that “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Second, Patent Owner and Dr. Howell assert that a person of ordinary skill in the art “would have understood upon reading the second German application that the capsule features described would be intended to be combinable with each of the described embodiments.” PO Resp. 40; Ex. 2017 ¶ 61. But Patent Owner and Dr. Howell do not explain how a barcode could be used in the devices depicted in Figures 16–18, which place the detection means 2.4.2 on the outer circumference of the flange (not its underside) and rely on toothed-rings physically interacting with either the chamber, retaining arms, or a pinion. Ex. 1047, 12:22–31, 13:8–18. Indeed, the second German priority application explains that means 2.4.2 physically interacts with retaining arms 30 (embodiments of Figures 16 and 17) or a pinon (embodiment of Figure 18), and if means 2.4.2 were not present in these embodiments the capsule would either “drop through into a waste container” or could not be inserted through the insertion shaft. Id. at 12:22– 27, 13:9–12, 13:16–35 (noting that in the embodiment disclosed in Figure 18 a pinon interacts with means 2.4.2 and only when means 2.4.2 “is formed complementary to the teeth of the means” can the capsule be inserted). At no point does the second German application identify means 2.4.2 as a barcode or suggest a barcode could be used as the detection means. The second German application also states that A person skilled in the art is also aware that for example the insertion shaft may also contain a sensor, for example a camera, clear, however, that element 27 is part of the brewing chamber, and not the capsule. Ex. 1047, 12:27–31, 13:5–8, 13:21–26, 15:36. Thus, we are not persuaded that the toothed ring is in fact on the bottom side of the flange. which senses the shape of the means 2.4.2. For example, it would be possible, in the present case, for the shape of the teeth and/or the spacing between the same to be sensed. This signal, in turn, is passed to a control means, which frees, for example, the brewing chamber if the capsule is the correct one. Ex. 1047, 14:11–19. Again, despite using a camera to determine if a capsule is “the correct one,” the second German application does not suggest using a barcode in place of the toothed-ring structure, or suggest moving the location of the detection means 2.4.2 from the outer surface to the underside of the flange. This reinforces that the inventors did not contemplate using a barcode in the embodiments depicted in Figures 16–18.” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “As asserted by Petitioner, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 48–49; Pet. Reply 23–24 (Ex. 1003 ¶¶ 184–185; Ex. 1005 ¶¶ 82–84, Fig. 5). And, although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as generally depicted in Figure 5 of Jarisch. Pet. Reply 24 (noting that Dr. Howle’s testimony on this subject is “conclusory” and depends on “bodily incorporation”). As such, we credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing.17 Ex. 1003 ¶ 184. Patent Owner further contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that 17 As discussed above, Mr. Jobin has extensive experience in the design of brewing devices. Conversely, Dr. Howle has limited experience in this field and is not one of ordinary skill in the art. Although Mr. Jobin’s testimony is more persuasive regardless of the discrepancy in experience between the two declarants, when this difference in design experience is considered, it only serves to increase the weight we give to Mr. Jobin’s testimony. there is a “snug fit” to avoid “unbalances.” PO Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of the multiple volume capsules or permit a “snug fit.” Id.; PO Resp. 28. Patent Owner’s assertion that Yoakim discloses the use of certain capsules that might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. As noted by Patent Owner, Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure. But Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch, and other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Moreover, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or even less effective. Id. (citing Ex. 2019, 36:18–37:6; Ex. 1005 ¶ 23 (Jarisch explaining that its device includes a capsule holding means and that the capsule may be successfully driven in rotation). As such, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange and that this design would allow for successfully receiving single-serve capsules and driving them in rotation. Ex. 1003 ¶¶ 182–184; Ex. 1005 ¶ 23.” slip op. at 39

  Patent outcomesUS 11,230,430 unpatentable
  § 103 obviousness§ 112 disclosurecites KSR · Graham
  Patents in suitUS 11,230,430
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Nabors Drilling Technologies USA, Inc. v. Motive Drilling Technologies, Inc.All claims unpatentable
  PTAB · Feb 22, 2024 · PGR2022-00055 · APJ Sean P O’Hanlon · PGR · Final written decision

  Claims 1–4 and 10–13 are unpatentable under § 101; claims 1–4 and 11–13 are also unpatentable as obvious over Pirovolou, Panchal, and Budiman, and claim 10 over those references plus Downton.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of ordinary skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). The person of ordinary skill in the art is a hypothetical person presumed to have known the relevant art at the time of the invention. In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, we may consider certain factors, including: “(1) the educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of active workers in the field.” Best Med. Int’l, Inc. v. Elekta Inc., 46 F.4th 1346, 1353 (Fed. Cir. 2022) (citations omitted). “The patent’s purpose can also be informative.” Id. (citation omitted).” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Neither party presents arguments for the express construction of any term, instead interpreting the claim terms according to their ordinary and customary meaning. Pet. 18; PO Resp. 29. For purposes of this Decision, and based on the record before us, we determine that no construction of any term is necessary. slip op. at 10

  • Patent Eligibility (§101) › Alice/Mayo step one — 'directed to'Step1 directed to exceptionUnpatentable

    “information (recitations 1.3, 1.8), using received information to generate a set of possible drilling paths (recitation 1.4), removing certain ones of the generated possible paths (recitations 1.5–1.6), selecting a desired one of the generated paths (recitation 1.7), and updating a plan to include the selected path (recitation 1.9). This collection and manipulation of data is similar to the data collection and management concepts that were held to be patent ineligible in previous cases. See Content Extraction & Transmission LLC v. Wells Fargo Bank, 776 F.3d 1343, 1345, 1347 (Fed. Cir. 2014); In re TLI Commc’ns LLC Patent Litig., 823 F.3d 607, 610, 613 (Fed. Cir. 2016); Elec. Power Grp., LLC v. Alstom S.A., 830 F.3d 1350, 1351–54 (Fed. Cir. 2016). Although the claim enumerates the type of information (i.e., BHA location, target path, and possible convergence paths) that is acquired and analyzed, the Federal Circuit has explained that the mere selection and manipulation of particular information by itself does not make an abstract concept any less abstract. Elec. Power Grp., 830 F.3d at 1353; Dig. Image Techs., LLC v. Elecs. for Imaging, Inc., 758 F.3d 1344, 1351 (Fed. Cir. 2014).” slip op. at 20

  • Patent Eligibility (§101) › Alice/Mayo step two — inventive conceptStep2 no inventive conceptUnpatentable

    “removing illogical options as the “pruning” step, rather than both of the “removing” steps as asserted by Patent Owner. See Ex. 1001, 6:21–34, 6:42–43, 6:50. The two “removing” steps noted by Patent Owner reduce the number of cost considerations that the computer must perform (by increasing the number of other comparisons (regarding illogical options and rule violations)), but do not change the way in which the computer performs the cost analyses. And, as explained above, neither the “removing” steps nor any other recitation alters the way in which drilling is performed. Moreover, as also noted above, the “removing” steps relied upon by Patent Owner are part of the abstract idea itself and, therefore, cannot evidence an inventive concept. See Berkheimer v. HP Inc., 890 F.3d 1369, 1374 (Fed. Cir. 2018) (Moore, J., concurring); BSG Tech LLC v. BuySeasons, Inc., 899 F.3d 1281, 1290–91 (Fed. Cir. 2018). As noted above, the additional elements of the processor and memory are recited at a high level of generality, i.e., as a generic processor performing a generic computer function of processing data. The ’454 patent also describes the processor and memory as generic computer components. See Ex. 1001, 4:50–5:29. The claim includes the additional recitations of a memory and processor to send a control signal. A memory for storing data and a processor for processing data and sending signals are well‐understood, routine, and conventional computer components, which in this claim are recited at a high level of generality and perform generic computer functions (e.g., storing, processing, and transmitting information). See Ex. 1003 ¶¶ 104–105 (citing Ex. 1006 ¶ 22, Fig. 2, code (57)). Generic computer components performing generic computer functions, alone, do not amount to significantly more than the abstract idea, as the Supreme Court has explained that “the mere recitation of a generic computer cannot transform a patent-ineligible abstract idea into a patent-eligible invention.” Alice, 573 U.S. at 223. Viewing the limitations in combination also fails to amount to significantly more than the abstract idea. The claimed system seeks to use a processor and memory to generate possible convergence paths, remove certain ones of the generated possible paths, select a desired one of the generated paths, update a plan to include the selected path, and send a signal, but these functions reflect ordinary usage typically performed by a generic computer, as would be recognized by those of ordinary skill in the field of mining. See, e.g., Ex. 1006 ¶ 22, code (57). The claim here does not invoke any of the considerations that courts have identified as providing significantly more than an exception; the combination of elements is no more than the sum of their parts. Additionally, as the Federal Circuit has explained, claims that do not include a requirement for performing “claimed functions of [data] gathering, analyzing, and [transmitting] by use of anything [other than] conventional, generic technology” fail to provide an inventive concept. Elec. Power Grp., 830 F.3d at 1356. Accordingly, on this record, Petitioner sufficiently shows that the claim as a whole does not amount to significantly more than the recited exception.” slip op. at 29

  Patent outcomesUS 11,170,454 unpatentable
  Claim construction§ 101 eligibility§ 102 anticipation§ 103 obviousnesscites Alice · Mayo · Bilski · Electric Power · KSR · Graham
  Patents in suitUS 11,170,454

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.