- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - Tennant Company v. Oxygenator Water Technologies, Inc.No claims unpatentablePTAB · Feb 28, 2025 · IPR2021-00625 · APJ Kristina M Kalan · IPR · Remand
Claims 13, 14, and 17–27 were not shown unpatentable because Tennant did not establish that Wikey or Davies inherently disclosed the claimed microbubbles and nanobubbles.
RulingsRemand decision- RemandOther
“The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11. On September 19, 2024, we authorized the parties to file supplemental briefing, stating also that the “parties are not authorized to present new factual assertions, provide additional exhibits, or raise new arguments beyond those directed to the issues raised in the remand.” Ex. 3001. Pursuant to this authorization, Petitioner filed an Opening Brief on Remand (Paper 61; “Pet. Br. Rem.”) in support of its contentions. Patent Owner filed a Lead Brief on Remand (Paper 62; “PO Br. Rem.”) in support of its contentions. Petitioner filed a Reply Brief on Remand (Paper 66; “Pet. Reply Br. Rem.”). Patent Owner filed a Responsive Brief on Remand (Paper 65; “PO Resp. Br. Rem.”).” slip op. at 3
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable
“Accordingly, and in line with our previous determination that “Wikey appears to disclose each limitation of claim 13 except ‘microbubbles and nanobubbles having a bubble diameter of less than 50 microns’” (Final Dec. 20), we determine that Petitioner has not demonstrated that Wikey inherently discloses microbubbles or nanobubbles. Accordingly, Petitioner has not demonstrated that Wikey discloses every limitation of claim 13.” slip op. at 56
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“The Federal Circuit vacated and remanded our anticipation determinations as to claims 13, 14, and 17–27. Tennant, 11.1 The Federal Circuit further stated: “Because we vacate and remand to the Board to consider Tennant’s anticipation argument, we do not reach Tennant’s obviousness arguments (which depends on its contention that either Wikey or Davies produce nanobubbles).” Id. at 11.” slip op. at 3
Patent outcomesUS RE45,415 not shown unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham - PTAB · Jun 24, 2024 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Institution
The Board instituted IPR on claims 1–5, 7, and 9–14 on all asserted grounds, finding a reasonable likelihood of prevailing on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDecided for petitioner
“because they are premised on a misapplication of our precedent. Providing a document to the Office in an Information Disclosure Statement is sufficient to satisfy AB prong one as long as that “previously presented” art is “the same or substantially the same” as that presented in the Petition. See Advanced Bionics, 7–8 (holding that “[p]reviously presented art includes . . . art provided to the Office by an applicant, such as on an Information Disclosure Statement (IDS), in the prosecution history of the challenged patent”). As we have already found, there are no material differences between the asserted art and the prior art involved during examination under BD factor (a). Petitioner provides no authority that requires us to interpret “involved during examination” under BD factor (a) as “used in a rejection” or “mentioned by the examiner” (Pet. 60), and we are aware of none. Patent Owner’s position, in that regard, appears to conflate the first AB prong (whether the art previously was presented to the Office) with an aspect of the second AB prong (the extent to which the Examiner considered that art).” slip op. at 11
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The findings and conclusions set forth in this Decision are provided for the exclusive purpose of explaining our determination that Petitioner has met that standard on this record. slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“have had “at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29). Patent Owner does not propose a different level of skill in the art at this stage of the proceeding. See Prelim. Resp., generally. On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Petitioner’s proposed unchallenged definition because, on this record, it is consistent with the disclosures of the asserted prior art references.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that the claimed term “aryl” should be construed to mean “an aromatic ring system.” See Pet. 20–23. Patent Owner does not propose a different claim construction at this stage of the proceeding. See Prelim. Resp., generally. After review of the preliminary record, we determine that no claim terms need to be construed for purposes of institution. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”).” slip op. at 8
Claim construction§ 103 obviousnessDiscretionary denialcites PhillipsPatents in suitUS 11,041,087 - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00071 · APJ Julia Heaney · IPR · Final written decision
Claims 3–5, 8, 11, 20–22, 27–29, 31, and 33 are unpatentable as obvious over the stated combinations of prior art and skilled-artisan knowledge.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.” Our analysis begins with the claim language. The term “adhesion layer” appears in each of the ’806 patent’s independent claims, which include both method and device claims. See, e.g., Ex. 1001, 13:44–63 (claim 1 directed to a “semiconductor device”); id. at 17:58–18:17 (claim 30 directed to a “method of manufacturing a semiconductor device”). Claim 1 recites “a first semiconductor chip having a first adhesion layer adhered to its back surface” and “a second semiconductor chip having a second adhesion layer adhered to its back surface.” Id. at 13:49–51, 13:54–56 (emphasis added). Claim 30 recites the steps of “forming a first insulating adhesion layer on a back surface of a first wafer” and “forming a second insulating adhesion layer on a back surface of a second wafer.” Id. at 17:60–62, 18:3–5 (emphases added). In the absence of contrary evidence, we must assume that the term “adhesion layer” has the same meaning in all claims of the ’806 patent. In re Varma, 816 F.3d 1352, 1363 (Fed. Cir. 2016) (“the principle that the same phrase in different claims of the same patent should have the same meaning is a strong one, overcome only if ‘it is clear’ that the same phrase has different meanings in different claims,” quoting Fin Control Sys. Pty, Ltd. v. OAM, Inc., 265 F.3d 1311, 1318 (Fed. Cir. 2001)). The language of claim 30 and similarly worded claims of the ’806 patent suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer and need not be pre-formed, as argued by Patent Owner. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of claims 30 and 31 does not support Patent Owner’s construction that the “adhesion layer” must be a pre-formed layer that is adhered. Cf. PO Resp. 22–25 (arguing for that construction).” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Citing testimony from Dr. Suhling, Petitioner asserts that a person of ordinary skill in the art at the priority date of the ’806 patent would have had i) a bachelor-level degree in electrical engineering, mechanical engineering, material science, or a related subject and five or more years of experience working in the field of semiconductor packaging; ii) a Master’s-level degree in mechanical engineering, electrical engineering, material science, or a related field, and at least 1-3 years of experience in the design/development of semiconductor packages; or iii) a Ph.D.- level degree in mechanical engineering, material science, electrical engineering, or a related field, and at least some experience in the area of semiconductor packaging. Pet. 17–18 (citing Ex. 1002 ¶¶ 28–32). Petitioner further states that “[a]dditional education may substitute for professional experience, and significant work experience may substitute for formal education.” Pet. 18. Patent Owner’s declarant, Mr. Elenius, states that a person of ordinary skill in the art would have had “a bachelor’s degree in electrical, mechanical or materials engineering and two to three years of experience in the design or development of semiconductor manufacturing, or the equivalent.” Ex. 2014 ¶ 32. Mr. Elenius further states that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. For purposes of this Decision, we find no meaningful differences” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“3. Reasons to Combine Petitioner contends that it would have been obvious for a person of ordinary skill in the art to combine Ball’s teachings of stacking chips with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 28–29. Petitioner contends that a person of ordinary skill would have been motivated to combine the teachings of Ball and Mostafazadeh for several reasons, including to provide a more efficient manufacturing process for multichip modules and to simplify the stacking process. Pet. 28–31. Patent Owner argues that a person of ordinary skill would not have been motivated to combine Mostafazadeh with Ball because there would have been no reasonable expectation of success and the combination would not have resulted in a functioning semiconductor device. PO Resp. 39. Patent Owner asserts that Petitioner’s combination of Ball and Mostafazadeh would fail for multiple reasons and that Mostafazadeh does not describe multi-chip stacked mounting. Id. at 39–52. Having considered the evidence and arguments, we determine that the preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module with Mostafazadeh’s process for applying adhesive at the wafer stage and then dicing to create individual chips with adhesive backsides. Pet. 28–31. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s combination. Ball teaches a stacked multichip module using flip-chip and wire bond interconnections, where a lower chip is flip-chip connected to a substrate using metal bumps, and an upper chip is wire bond connected to the substrate. Ex. 1005, Abstract, 3:42–64, 4:58–59, 5:3–12, 5:18–20, 5:23– 27, Fig. 1. Ball teaches that the upper chip is attached to the lower chip in a back-to-back arrangement with a layer of adhesive applied over a back side of the lower chip. Id. Mostafazadeh teaches a method for applying integrated circuit dies to support surfaces. Ex. 1003, Abstract. In Mostafazadeh’s method, an adhesive coating is formed on a surface of a semiconductor wafer, the adhesive coating is dried, and the semiconductor wafer is diced to form integrated circuit dies, each having an adhesive layer on its mounting surface, i.e., its back surface. Id. at 3:5–11, 5:20–25, 7:9–11, 7:29–8:2, Fig. 2 (steps 104–110). A selected die is then attached to an associated support surface by placing the adhesive layer of the selected die in contact with the associated support surface. Id. at 3:11–13, 8:10–12, Fig. 2 (steps 112–118).” slip op. at 33
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“After considering the parties’ arguments and evidence, we determine that Petitioner meets its burden of proof for claim element [3d]. Our finding is supported by Figure 1 of Ball, which depicts a second chip mounted to a first chip in a back-to-back arrangement. Ex. 1002 ¶ 158; Ex. 1005, Fig. 1. More particularly, Ball’s Figure 1 shows that back side 32 of upper die 12 (the claimed “second semiconductor chip”) is mounted to back side 30 of lower die 14 (the claimed “first semiconductor chip”) by adhesion layer 28. Ex. 1005, 5:18–20. Relying on Dr. Suhling’s testimony, Petitioner shows persuasively that “a circuit is formed on the front surface 34 of upper die 12 . . . , as evidenced by bonding pads 36 and wires 38 connecting the upper die’s circuitry to the wiring layer on substrate 16.” Pet. 41; Ex. 1002 ¶ 159. We credit Dr. Suhling’s unrebutted testimony that, “[b]ecause the circuitry is on the front side of upper die 12, a [person of ordinary skill in the art] would know that the back surface adhesive layer is ‘where a circuit is not formed.’” Ex. 1002 ¶ 159. Patent Owner argues that, to meet claim elements [3b] and [3d], “a reference must show that an adhesion layer extends to cover the entire back surface of the second semiconductor chip where a circuit is not formed.” PO Resp. 30. We find no support in the claim language or other intrinsic evidence for Patent Owner’s argument. In our view, the phrase “back surface where a circuit is not formed” identifies the back side of the chip as opposed to the front side, where a circuit is formed. Ex. 1001, 14:26–27 (claim element [3d]). Our interpretation is supported by the claim language as a whole. Claim element [3b], for example, recites “a first semiconductor chip having a circuit forming on its front surface and an adhesion layer adhered to its back surface.” Id. at 14:17–19 (emphasis added). In this” slip op. at 47
Patent outcomesUS RE38,806 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00072 · APJ Julia Heaney · IPR · Final written decision
Claims 1, 2, 6, 7, 9, 10, 12–19, 23–26, 30, and 32 are unpatentable as obvious over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Although the proposals for the level of skill in the art by the parties’ declarants have differences in wording, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’806 patent, the types of problems and solutions described in the ’806 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionGranted
“On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.”” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Petitioner shows persuasively that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Mostafazadeh with Ball and Fogal. Pet. 32–33. The evidence discussed above concerning reasons to combine supports a reasonable expectation of success. We are also persuaded by Dr. Suhling’s testimony that the “combination of Ball, Fogal, and Mostafazadeh would require no modification of the multichip modules in Ball and Fogal: rather Mostafazadeh merely explains in more detail methods known in the art for creating chips with adhesive surfaces.” Ex. 1002 ¶ 239; see also id. ¶¶ 62– 69 (describing prior art methods for applying adhesive to the backside of a wafer). For the foregoing reasons, we find that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of successfully combining Ball, Fogal, and Mostafazadeh.” slip op. at 46
- ExcludeOther
“We do not discuss or cite any of these exhibits in this Decision, or rely on any of them in reaching our determination that all of the challenged claims are unpatentable. Because their presence in the record would not affect our analysis in this Decision, we dismiss as moot Petitioner’s motion with respect to these exhibits.” slip op. at 72
Patent outcomesUS RE38,806 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00073 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–15 are unpatentable under §103: the Board found the asserted combinations taught the limitations, with motivation to combine and a reasonable expectation of success.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“The claim language, “forming” an “adhesion layer on a back surface,” suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of the claims of the ʼ879 patent does not support Patent Owner’s construction that the “adhesion layer” must be a preformed layer that is adhered. Cf. PO Resp. 21–23 (arguing for that construction).” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’879 patent, the types of problems and solutions described in the ’879 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 13
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Mostafazadeh, could overflow.” PO Resp. 41, 42 (citing Ex. 2014 ¶ 121). According to Patent Owner, the downward pressure during mounting “could cause adhesive to squeeze out.” Id. at 41. We find that Patent Owner’s argument and the corresponding testimony of Mr. Elenius are speculative and do not outweigh Petitioner’s evidence of obviousness. The overflow issue was recognized and addressed by Mostafazadeh. Contrary to Patent Owner’s argument, Mostafazadeh provides explicitly that its adhesive layer “covers an entire mounting surface 190 of the selected integrated circuit dies 182 and does not extend beyond a boundary of the mounting surface 190.” Ex. 1003, 10:6–9 (emphasis added). Additionally, Mostafazadeh teaches that when “the adhesive layer is rolled on, it is exactly the same size as the mounting surface and is quite even. Thus, when the die is attached to its supporting surface the adhesive does not extend beyond the mounting surface of the die.” Id. at 9:15–18. Further, Mostafazadeh teaches that its process avoids the adhesive jutting around the edges of the die. Id. at 2:26–28. These teachings support that a person of ordinary skill in the art would have had a reasonable expectation of successfully applying Mostafazadeh’s die attachment method to Ball’s multichip device while avoiding adhesive overflow. Next, Patent Owner argues that Petitioner’s combination would fail” slip op. at 40
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module using flip-chip and wire bond connections with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 25–28. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s” slip op. at 33
Patent outcomesUS 6,352,879 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 6,352,879 - Unified Patents, LLC v. VL Collective IP LLCSome claims unpatentablePTAB · Dec 18, 2023 · IPR2022-01086 · APJ Patrick M Boucher · IPR · Final written decision
Claims 1, 3, 5, 9, 12, 13, and 15 are unpatentable over Sonohara; claims 20 and 21 were not shown unpatentable because Sonohara’s assignment rule is based on timestamps.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner’s expert, Dr. Goodrich, proposes what Patent Owner characterizes as “a somewhat different level,” namely “an individual with at least a bachelor’s degree in Computer Science or related area and two years of experience developing software tools and/or computer systems for use in the area of audio or video creation, encoding, and/or distribution.” PO Resp. 13; Ex. 2007 ¶ 50. Although we agree that the respective articulations are “somewhat different,” they are generally similar, and our Decision does not depend on nuanced distinctions regarding the level of ordinary skill. Indeed, Dr. Goodrich describes his proposed articulation as “approximate,” such that “more work experience could compensate for less education or more education could compensate for less work experience.” Ex. 2007 ¶ 50. Because we find Petitioner’s proposal reasonable, consistent with the level of skill reflected by the prior art, and supported by Dr. Freedman’s testimony, we adopt it for this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). We nevertheless note that we would reach the same ultimate conclusion that claims 1, 3, 5, 9, 12, 13, and 15 (but not claims 20 and 21) have been shown to be unpatentable by a preponderance of the evidence were we to adopt Patent Owner’s proposal. See PO Resp. 13 (“this Response establishes that Petitioner’s arguments fail even under its preferred definition of the level of ordinary skill”).” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notNot reached
“We need not resolve this dispute because we reach the same ultimate conclusion that Petitioner shows, by a preponderance of the evidence, that claims 1, 3, 5, 9, 12, 13, and 15 are unpatentable, but not that claims 20 and 21 are unpatentable, even if we apply Patent Owner’s proposed construction that the preambles are limiting and the first and second data files must be different. See Reply 15 (Petitioner asserting that “there is no need to construe the preambles as the prior art meets them even if construed”); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). For purposes of this Decision, we accordingly treat the preambles of independent claims 1 and 9 as limiting, and with the recited “first data file” and “second data file” as distinct data files.4” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner
“We agree with Patent Owner’s contention that the emphasized sentence defines the term “content-related.” See PO Resp. 15–16 (Patent Owner arguing that “[t]here are thus three strong indications of lexicography: (1) ‘content-related’ is set off by quotation marks; (2) the patentee used the word ‘is’ to describe the term ‘content-related’; and (3) the patentee states what ‘content-related’ is ‘understood to mean.’” Nor does Petitioner disagree that the sentence is definitional. See Tr. 8:15–16 (referring to the “term content-related as it’s defined in the specification”). Indeed, in the Starz litigation, the district court also treated the sentence as definitional, a fact that we find significant as a matter of comity. See Ex. 1018, 111:24–112:1 (district court judge stating at Markman hearing, “I’m going to adopt . . . the express definition provided in the specification”). But like the district court, we discern insufficient reason to adopt the additional gloss that Patent Owner seeks to apply to the definition of “content-related.” That is, Patent Owner proposes that we additionally construe the phrase “syntactical meaning” within the definitional statement to arrive at Patent Owner’s proposed construction. PO Resp. 16–20. According to Patent Owner, “[t]he specification makes clear, through its use of consistent and repeated examples, that ‘syntactical meaning’ requires a specific relationship between the data segments within a data file: succeeding data segments within a data file must be ordered so as to present the content in its intended sequence when rendered.” Id. at 17 (citing VirnetX Inc. v. Cisco Sys., Inc., 767 F.3d 1308, 1317–19 (Fed. Cir. 2014); Alloc, Inc. v. ITC, 342 F.3d 1361, 1368–71 (Fed. Cir. 2003)). Patent Owner adds that the claims, the context provided by the problems solved by the ’794 patent, and the cross-examination testimony of Petitioner’s expert, Dr. Freedman, all support this additional aspect of Patent Owner’s proposed construction. Id. at 18–20. Relying on additional direct testimony by Dr. Freedman, Petitioner counters this position as “improperly import[ing] limitations from the specification that are not required by the claims” and “render[ing] other portions of claim 1 superfluous.” Reply 3 (citing Ex. 1016 ¶ 22); see Tr. 10:18–20 (Petitioner explaining at oral hearing that “the syntax information is simply just identification information which is used to find out what the order of the files is. But the identification information does not by itself indicate the order. It’s just an identifier.”). We agree with Petitioner that it would be imprudent to adopt Patent Owner’s additional gloss because, “[w]hile claims must be construed in light of the specification, . . . limitations from the specification are not to be read into the claims, . . . for ‘[i]t is the claims that measure the invention.’” Golight, Inc. v. Wal-Mart Stores, Inc., 355 F.3d 1327 (Fed. Cir. 2004) (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 (Fed. Cir. 1985) (other citations omitted). It is apparent that the Applicant for the ’794 patent understood how to define terminology recited in the claims, but chose to limit its definition of “content-related” in terms of the broader phrase “syntactical meaning” rather than through narrower specific reference to presentation order. In addition, claims 1 and 9 already specify “sequentially outputting the first and second data segments according to their chronological sequence,” which supports Petitioner’s observation that requiring an additional sequential order to “content-related . . . data segments” renders other portions of claim 1 superfluous. See Reply 3. We accordingly adopt the definitional construction provided by the” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer not foundDecided for petitioner
“As a basic principle of claim interpretation, prosecution disclaimer promotes the public notice function of the intrinsic evidence and protects the public’s reliance on definitive statements made during prosecution.” Omega Engineering, Inc. v. Raytek Corp., 334 F.3d 1314, 1323 (Fed Cir. 2003) (citing Digital Biometrics, Inc. v. Identix, Inc., 149 F.3d 1335, 1347 (Fed. Cir. 1998)) (emphasis added). As such, a statement during prosecution qualifies as a disavowal of claim scope only if it is “so clear as to show reasonable clarity and deliberateness” and “so unmistakable as to be unambiguous evidence of disclaimer.” Id. at 1325 (citations omitted). “Consequently, for prosecution disclaimer to attach, [Federal Circuit] precedent requires that the alleged disavowing actions or statements made during prosecution be both clear and unmistakable.” Id. at 1325–26. “The party seeking to invoke prosecution history disclaimer bears the burden of proving the existence of a clear and unmistakable disclaimer that would have been evident to one skilled in the art.” Mass. Inst. of Tech. v. Shire Pharms., Inc., 839 F.3d 1111, 1119 (Fed. Cir. 2016). And “[s]tatements by the patent owner are not considered in a vacuum; rather, the skilled artisan would look at the record as a whole in assessing claim scope.” Galderma Lab’s v. Amneal Pharma, 806 F. App’x 1007, 1010 (Fed. Cir. 2022) (citing Wang Labs., Inc. v. Toshiba Corp., 993 F.2d 858, 867 (Fed. Cir. 1993) (“The prosecution history must be examined as a whole in determining whether estoppel applies.”)). We have reviewed the prosecution history, which we summarize supra § I.A.3., and we have particularly reviewed those portions highlighted by Patent Owner. See PO Resp. 32–40. We reach the same conclusion as the district court in the Starz litigation that the standard for attachment of prosecution disclaimer is not met. See Ex. 1018, 109:15–22 (district court stating at Markman hearing, “I’ve also carefully reviewed the portions of the prosecution history relied on by VideoLabs, including the patentee’s arguments regarding the Shin and Rosenau references, and I’m up [sic: not6] persuaded there was a clear and unmistakable disclaimer of all assignment rules that perform assignments by using exact timing information”). slip op. at 20
Patent outcomesUS 8,605,794 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,605,794 - Samsung Electronics Co., Ltd. / Micron Technology, Inc. et al. v. Netlist, Inc.All claims unpatentablePTAB · Dec 6, 2023 · IPR2023-00406 · APJ Jon M Jurgovan · IPR · Final written decision
Claims 1–30 are unpatentable as obvious over Grounds 1–3; the Board did not reach Grounds 4–5 and dismissed Petitioner’s motion to exclude as moot.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“e) Conclusion on Motivation to Combine Harris and the FBDIMM Standards On this record, Petitioner has shown by a preponderance of the evidence that a person of ordinary skill in the art would have combined Harris and the FBDIMM standards since Harris states that its memory module may include fully buffered DIMMs (FBDs). Ex. 1023 ¶ 9. We agree that one of ordinary skill in the art would have recognized Harris’s mention of FBDIMMs as a standard and looked to the FBDIMM Standards for information concerning the voltage values standardized for use in an FBDIMM. Ex. 1027, 83; Ex. 1028, 9. For these reasons and others set forth above, we determine that one of ordinary skill in the art would have combined Harris and the FBDIMM Standards with a reasonable expectation of success.” slip op. at 41
- ExcludeMotion to exclude, deniedDenied
“H. Motion to Exclude Petitioner seeks to exclude materials referenced in three URLs submitted with Patent Owner’s Sur-Reply on August 4, 2023. Paper 33 (citing Paper 31, 1 n.2, 24, 26). Because we do not rely on any of these URLs in a manner adverse to Petitioner, we dismiss the Motion to Exclude as moot.” slip op. at 89
Patent outcomesUS 11,016,918 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,016,918
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.