PTAB
Advanced fields
132 decisions · 410msnewest first
  • PTAB · Oct 5, 2026 · IPR2025-00677 · APJ Ryan H Flax · IPR · Final written decision

    Claims 1–7, 10, 13, 16, 18, and 19 are unpatentable as anticipated by Douglas and Ganesh; the revised contingent motion to amend is denied.

    RulingsFinal written decision
    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “record before us, we conclude that Petitioner proves by a preponderance of the evidence that each challenged claim of the ’811 patent is anticipated by Douglas and by Ganesh. Accordingly, we find that claims 1–7, 10, 13, 16, 18, and 19 of the ’811 patent are unpatentable. Moreover, we find that Patent Owner’s Revised Contingent Motion to Amend adds new matter in every proposed substitute claim, and, therefore, the motion is denied.” slip op. at 80

    • 112 supportMotion to amend, deniedDenied

      “Because the RMTA does not meet the foundational statutory and regulatory requirements, we decline to reach Petitioner’s arguments as to the asserted unpatentability of the proposed substitute claims. C. CONCLUSION ON REVISED MOTION TO AMEND Because the RMTA does not meet foundational statutory and regulatory requirements for a motion to amend, it is denied.” slip op. at 80

    Patent outcomesUS 10,430,811 unpatentable
    § 102 anticipationcites Phillips
    Patents in suitUS 10,430,811
  • PTAB · Sep 29, 2026 · IPR2025-01122 · APJ Carl M Defranco · IPR · Final written decision

    Claims 1–16 are unpatentable as obvious over Liao or Liao and Cheng; Rolicki is not prior art, and the challenge over Offord ’341 and Offord ’797 fails.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “A. Level of Ordinary Skill in the Art Baby Jogger does not dispute Evenflo’s definition of the level of ordinary skill in the art, which is that a person of ordinary skill in the art (hereinafter, “one skilled in the art”) would have had “a bachelor’s degree in a relevant field (e.g., mechanical engineering or industrial design) and at least two years of product design experience and/or industry experience with juvenile products” and that “[m]ore education can replace product design experience, and vice versa.” Pet 8 (citing Ex. 1001 ¶¶ 31–33); PO Resp. generally. We apply that definition here, as it accords with the problems addressed in the prior art and the specification of the ’682 patent.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “At the outset, we note that the claim language requires only that “the first seat and the second seat” be arranged in an inline descending configuration, not that the seat’s mounting points or other physical connections be so arranged. Ex. 1010, 17:31–33. Baby Jogger improperly reads “seats” out of the claim and substitutes the seat’s “mounting points” on the frame. A proper reading of the claim language focuses on what happens when both seats are connected to the frame, not where they are so connected. In other words, “when connected to the frame” simply emphasizes that both seats must be connected to the frame to form the inline descending configuration, as opposed to the single stroller embodiment of Figure 1, where there cannot be an inline descending configuration because only one seat is connected to the frame and the other seat is removed, i.e., not connected to the frame. That reading is supported by the specification of the ’682 patent,” slip op. at 9

    • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

      “We find that testimony persuasive, for it shows what one skilled in the art would have recognized the 2008 Provisional as necessarily disclosing. The relevant inquiry is whether the disclosure of the prior application “convey[s] with reasonable clarity to those skilled in the art that, as of the filing date sought, the inventor was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis in original; citation omitted). “While a prior application need not contain precisely the same words as are found in the asserted claims, . . . the prior application must indicate to a person skilled in the art that the inventor was ‘in possession’ of the invention as later claimed.” Id. In other words, “to satisfy the written description requirement, ‘the missing descriptive matter must necessarily be present in the [original] application’s specification such that one skilled in the art would recognize such a disclosure.’”7 Id. (quoting Tronzo v. Biomet, Inc., 156 F.3d 1154, 1159 (Fed. Cir. 1998) (emphasis added). “This requires that the written description actually or inherently disclose the claim element.” Id. at 1306–07. Moreover, a drawing may supply written description for the arrangement it depicts even though the text describes that arrangement in different terms. See Cooper Cameron Corp. v. Kvaerner Oilfield Prods., Inc., 291 F.3d 1317, 1319–23 (Fed. Cir. 2002).” slip op. at 16

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Instead, Evenflo’s argument rests on isolating the statement—“A similar sub-frame arrangement is disclosed in [Offord ’797]”—from the remainder of the passage in which that statement appears in order to arrive at a reason to incorporate the reversibility teaching of Offord ’797. However, when that statement is read in the context of the full passage in which it appears, nowhere does that passage suggest reversibility as the reason for referencing Offord ’797. More accurately, it suggests a different reason that relates to a curved lug 108 by which sub-frame 100 rests on the stroller’s main frame 4 to carry the weight of the stroller’s two occupants— When the interface components 100 are attached to the frame assembly 4 they form a sub-frame of the frame assembly 4, and when the child-carrying units are mounted thereon, one behind the other, they are in a compact echelon formation, one of the connector sockets 106 of each component 100 being at a higher level in relation to the ground than the other connector sockets 106. The higher connector socket 106 and further connecting leg 102 are both connected to the respective opposite ends of an upper mounting piece 107. In addition, on the inner side of the lower connector sockets 106 there is a downwardly curved lug 108 which serves to rest upon a part of the basket frame 44, such that the weight of two infants is fully supported by the frame assembly 4. A similar sub-frame arrangement is disclosed in [Offord ’797]. Ex. 1051, 9:23–36 (emphasis added). That passage shows that, rather than reversibility of the sub-frame, the reference to Offord ’797 is more aptly directing the reader to the arrangement and details of a similarly curved lug structure in the stroller sub-frame of Offord ’797. Indeed, Figures 5 and 6 of Offord ’797, reproduced below, disclose just such a curved lug in the context of “corner pieces 20” having “channel 21.” Ex. 1054, 4:10–23.” slip op. at 53

    Patent outcomesUS 11,731,682 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousness
    Patents in suitUS 11,731,682
  • PTAB · May 12, 2026 · IPR2024-01487 · APJ Kristina M Kalan · IPR · Final written decision

    Claims 1–5, 7, 8, 20–22, 24, and 25 are unpatentable, based on anticipation by Bergstrom and obviousness over the stated combinations.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “In the Institution Decision, we adopted Petitioner’s definition. Dec. 9–10. In its Response, Patent Owner cites to Petitioner’s definition and states that Patent Owner “applies Petitioners’ definition.” PO Resp. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’138 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

      “We begin our analysis with the language of the claims. Phillips, 415 F.3d at 1312; see also SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 874–875 (Fed. Cir. 2004) (“There is a ‘heavy presumption’ that the terms used in the claims ‘mean what they say and have the ordinary meaning that would be attributed to those words by persons skilled in the relevant art.’”). Claim 1 recites, in relevant part, “said fluid flow control structure being a layered structure comprising a non-perforated fibrous polymeric layer and a first perforated polymeric layer.” Ex. 1001, 13:62–64 (limitation [1h]). The plain language of claim 1 does not address additional properties of the perforated polymeric layer; the language of the dependent claims, however, imposes additional limitations on the properties of the perforated polymeric layer such as a particular basis weight (claim 2), a particular makeup (claim 3), a particular aperture size (claim 7), a particular open area (claim 8), and that it “is a three-dimensionally formed layer having penetrating apertures extending from a first surface of the first perforated polymeric layer towards a second surface of the first perforated polymeric layer and forming protrusions on said second surface” (claim 4). The dependent claims’ additional language indicates that the term “perforated” within the term “perforated polymeric layer” in claim 1 is not limited in the manner asserted by Patent Owner’s proposed construction.” slip op. at 12

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “layer pierced through with holes or apertures,” we are persuaded that Petitioner meets its burden as to this limitation. Petitioner argues that under our construction, Bergstrom’s express disclosure of forming element 60, and Bergstrom’s explanation of the properties of forming element 60, meets the claimed “perforated polymeric layer” limitation. Pet. 38–41 (citing Ex. 1002 ¶¶ 114–117). Even under Patent Owner’s proposed construction, Petitioner argues, forming element 60 would also allow free flow of liquid bodily waste. Pet. Reply 3– 4 (citing Ex. 1021 ¶¶ 20–23). Importantly, Bergstrom expressly discloses: “suitable materials for the forming element 60 are plastic films, perforated plastic films and reinforced tissue or reinforced nonwoven materials.” Ex. 1004, 10:1–4. This express disclosure is clear. Even though the forming element 60 in Bergstrom might be “typically” liquid-impermeable (Ex. 1004, 9:24–30), that does not preclude a layer that is perforated, particularly where Bergstrom expressly discloses a perforated plastic film as one of the possibilities for forming element 60. Ex. 1004, 10:1–4. Additionally, although Patent Owner focuses on Bergstrom’s disclosure that forming element 60 is “typically liquid-impermeable” (PO Resp. 58–60; Ex. 1004, 9:24–30), we do not view Bergstrom’s use of the word “typically” as mandating that the forming element always be liquid impermeable. We agree that the word “typically” does not mean “always” and that such a reading would render “typically” superfluous. Pet. Reply. 5. We do not find any ambiguity in Bergstrom’s disclosure regarding possible use of perforated plastic films for its forming element 60; whether or not the forming element 60 provides other functions (like stiffness) does not dictate whether it may also be perforated, or be part of a fluid flow control structure. On this point, we credit Petitioner’s arguments and explanation, as supported by Dr. Pourdeyhimi’s testimony. Pet. Reply 6–7; Ex. 1021 ¶ 27–28 (“components of absorbent articles could be multifunctional”).” slip op. at 20

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

      “from the start” (PO Resp. 29), and that “using all or part of [Glaug’s] fluid-acquisition system in place of [Nakazawa’s] diffusion sheet would be antithetical to the teachings of both references” (id. at 35), we agree that the proposed combination of Nakazawa’s structure with the layers of Glaug is sufficiently motivated and reasonably expected to result in a successful article, for the reasons articulated by Petitioner. See, e.g., Pet. 59–65; Ex. 1002 ¶¶ 176–192. Namely, although fluid may flow in both Z directions in Nakazawa (PO Resp. 30), that does not foreclose the combination with Glaug in the manner proposed by Petitioner. See generally Ex. 1002 ¶¶ 176–192; see id. ¶ 184 (detailing the mechanics of the proposed combinations), ¶¶ 188–191 (discussing motivation to combine), ¶ 192 (discussing reasonable expectation of success). The combination can be achieved “either by adding the lower acquisition layer 64 [of Glaug] to diffusion sheet 63 [of Nakazawa], or by replacing diffusion sheet 63 [of Nakazawa] with the two-layer fluid acquisition system 34 [of Glaug],” and as persuasively explained by Dr. Pourdeyhimi, the arrangement constitutes a “fluid flow control structure.” See Ex. 1021 ¶¶ 45–47. Additionally, the diffusion sheet in Nakazawa can be made from the same material as used in Glaug, namely, AquiDry™. Id. ¶¶ 53–55; see also Tr. 17:25–18:3 (“although Glaug does not specify the name AquiDry in its disclosure, Patent Owner’s expert testified that it’s his understanding that Glaug is discussing the AquiDry material, the same material that is in Nakazawa . . . . they disclose using the same material, and Nakazawa says this material work[s]”). When asked if Patent Owner’s expert had any concerns that AquiDry was not the same as between Nakazawa and Glaug, Patent Owner’s counsel replied “They are the same, Your Honor. And we embrace that.” Tr. 46:8–12; see also id. at 58:19 (Petitioner’s counsel commenting about Patent Owner’s counsel: “they agree, AquiDry is used in both Nakazawa and Glaug”). Thus, Patent Owner’s argument that Nakazawa’s diffusion sheet and Glaug’s fluid acquisition layer have different purposes because Nakazawa’s diffusion sheet allegedly must promote fluid flow in the Z-directions, both toward and away from the body (PO Resp. 29–37; Ex. 2004 ¶¶ 26–28, 30– 35)) is not clearly supported by Nakazawa, and is also contravened by the shared disclosure of Nakazawa and Glaug as to the composition of the disputed layer. We have reviewed the complete record, including Patent Owner’s and Mr. Sheldon’s assertions that Nakazawa requires promoting fluid flow in both Z-directions (see id.), but find that Petitioner carries its burden to demonstrate that one of ordinary skill in the art would have been motivated to combine Nakazawa and Glaug with a reasonable expectation of success. On this complete record, Petitioner explains sufficiently why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, i.e., to use Glaug’s fluid acquisition system, or the lower non-perforated layer of its fluid acquisition system, in Nakazawa, and Petitioner provides well-supported reasons for doing so.” slip op. at 36

    Patent outcomesUS 9,308,138 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,308,138
  • PTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand

    Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”

    RulingsRemand decision
    • RemandOther

      “was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

      “considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35

    Patent outcomesUS 9,846,174 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 9,846,174
  • PTAB · Jan 7, 2026 · PGR2024-00043 · APJ Ryan H Flax · PGR · Final written decision

    Claims 1–39 are unpatentable under Grounds 1–10; Petitioner did not prove lack of enablement under Ground 11, and Patent Owner’s motion to exclude was denied.

    RulingsFinal written decision
    • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

      “REAL PARTIES-IN-INTEREST Petitioner identifies Avation Medical, Inc. as the real party-in-interest. Pet. x. Patent Owner identifies EMKinetics, Inc. as the real party-in-interest. Paper 5, 1; Paper 6, 1. Neither party contests the other’s assertions on this. C.” slip op. at 3

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “A POSA at the time of the claimed invention would have had an undergraduate degree in the field of biomedical engineering or a related discipline, such as electrical engineering, and at least two years of experience in the design and/or analysis of biomedical devices. Additional work experience could substitute for a formal degree and vice versa. Ex.1003, ¶21. Pet. 20 (citing Ex. 1003). Patent Owner does not contest this proposed definition or offer an alternative. See generally Resp. We accept and use Petitioner’s uncontested definition of the ordinarily skilled artisan, which appears to comport with the level of skill in the art reflected in the prior art of record and the ’943 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may]” slip op. at 19

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.200(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner states that, “no terms require construction for purposes of this Petition.” Pet. 21. Patent Owner presents no express position on claim construction. See generally Resp. We do not expressly construe any claim terms. E.” slip op. at 20

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner

      “question, based on factual findings. VidStream, 981 F.3d at 1063–64. Moreover, public accessibility is the touchstone in determining whether a reference is a printed publication and such depends on whether the reference was available to interested, ordinarily skilled persons exercising reasonable diligence, which is determined on a case-by-case basis. Id. at 1065. Particularly pertinent here is that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” Id. Hulu (which cites VidStream on this issue) concerned, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. Hulu, 2021 WL 487622. Hulu holds that, although testimonial evidence is one way to prove public accessibility, there are also a variety of hallmarks of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at *10–13, 21. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established, and whether the reference’s “purpose of publishing . . . was ‘dialogue with an intended audience.’” Id. at *10–21 (citing Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)).” slip op. at 30

    Patent outcomesUS 11,844,943 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham
    Patents in suitUS 11,844,943
  • PTAB · Dec 10, 2025 · PGR2025-00054 · APJ Ryan H Flax · PGR · Institution

    The Board instituted PGR on claims 1–16 on all four grounds, finding at least one claim more likely than not unpatentable based on obviousness, indefiniteness, or lack of written description.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “institute trial in a post-grant review. We institute a post-grant review only if the information presented in the petition filed under 35 U.S.C. § 321, if unrebutted, shows that it is more likely than not that at least one claim challenged in the petition is unpatentable. 35 U.S.C. § 324. On the existing record, we conclude that Petitioner demonstrates it is more likely than not that Petitioner would prevail in showing that at least one challenged claim of the ’781 patent is unpatentable under a presented ground. See generally Pet. Therefore, we grant institution of post-grant review. Our reasoning is discussed below.” slip op. at 2

    • PTAB / AIA Trials › Real party in interest / privityDecided for petitioner

      “STANDING Petitioner states that it certifies that: (1) the ’781 patent is available for post grant review because its earliest claimed effective filing date is October 9, 2018, and the patent issued less than nine months ago, on December 3, 2024; and (2) Petitioner is not barred or estopped from requesting a post grant review on the grounds in this petition. Pet. 5. This is sufficient. See 35 U.S.C. § 100(note)(A)–(B), § 321; 37 C.F.R. § 42.204(a). Patent Owner does not contest standing. See generally Prelim. Resp. B. REAL PARTIES-IN-INTEREST Petitioner states that “[t]he real parties-in-interest are Petitioner Straumann USA, LLC and its affiliates Institut Straumann AG and JJGC Indústria e Comércio de Materiais Dentários S.A.” Pet. 3. Patent Owner raises no objection and itself identifies “Smart Denture Conversions, LLC is the real party-in-interest.” Paper 4, 2; see generally Prelim. Resp. C.” slip op. at 3

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 42. And, as set forth above, Patent Owner asserts that, for the sake of its present arguments, it matters not which of the two proposed definitions we use for this proceeding. Prelim. Resp. 21. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’781 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This issue may be further developed at trial by the parties, if desired. C.” slip op. at 19

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “same claim construction standard that is used to construe patent claims in a civil action in federal district court thus, by default, we give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” 37 C.F.R. § 42.200(b); Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). Petitioner indicates that None of the claim terms of claims 1–16 need to be construed to determine the patentability issues presented in this petition. The petition applies the ordinary meaning of the claim language as it would be understood by a POSA after reading the ’781 patent. Ex. 1002, ¶130. Petitioner will propose a construction if Patent Owner argues or the Board determines that one is required for any term. Pet. 31 (citing Ex. 1002). And, Patent Owner presents no express position on claim construction at this point. See generally Prelim. Resp. At this stage of the proceeding, we do not expressly construe any claim terms; however, this position is preliminary and we may change it based on the fully developed record at trial.8 D.” slip op. at 19

    Claim construction§ 103 obviousness§ 112 disclosurecites Graham
    Patents in suitUS 12,156,781
  • PTAB · Nov 21, 2025 · IPR2025-00956 · APJ Ryan H Flax · IPR · Institution

    The Board instituted IPR on claims 1–12 under all asserted grounds, finding a reasonable likelihood that at least one claim is unpatentable.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “institute trial in an inter partes review. We institute an inter partes review only if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’992 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “These two proposed definitions of the ordinarily skilled artisan share many consistencies, for example, the types of degrees and experience such a person would have had, but differ in the number of years of experience. Petitioner proposes the ordinarily skilled artisan would have had at least five years of experience and Patent Owner proposes at least three years (which would necessarily include five years, too). Patent Owner also proposes that the ordinarily skilled artisan would have consulted a dentist, oral surgeon, prosthodontist, or periodontist with experience in dental implants and prosthetics. At this point, we find little meaningful difference between the two proposed definitions. In fact, neither does Patent Owner’s witness, Mr. Leinsing, who states that his “opinions would not change under either definition.” Ex. 2011 ¶ 40. Thus, at this stage, we accept and use Petitioner’s proposed definition of the ordinarily skilled artisan, which, unlike Patent Owner’s, does not implicate reliance on the knowledge of people other than the individual ordinarily skilled artisan. Petitioner’s definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’992 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). This parties may further developed this issue at trial, if desired. C.” slip op. at 13

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe patent claims in a civil action in federal district court. 37 C.F.R. § 42.100(b). In construing claims, district courts and the Board here, by default, give claim terms their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc).” slip op. at 14

    • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateNot entitled to earlier dateDecided for petitioner

      “Here, the first claim limitation at issue is broad, i.e., different thread pattern/profile between a definite and a temporary screw, and the Specification’s and priority applications’ disclosure is narrow and specific, asymmetric buttress style threads in a temporary screw and symmetrical threads in a definite screw (are different). Any apparent predictability in or maturity of the relevant field here must be contrasted with the fact that the Specification, considering the ’992 patent itself or any of the identified priority applications, never once even discusses the (claimed) concept of specifically differing the thread style between a temporary and a definitive screw. Any differences in thread style are not called out by the disclosure, but are described and can be discerned only in relation to the respective threads’ functionality, i.e., Fig. 75’s temporary screw 190 has buttress-style threading so it can be pulled out rather than unscrewed from the abutment; Fig. 9’s definitive screw 75 has male threads that fill the female threads of the abutment 8 for a secure permanent engagement. Ex. 1001, 15:23–30, 21:25–44, 23:3–36; Ex. 1012, 97–98, Figs. 9, 75. And, although it is possible for a single disclosed species to provide written description support for a claimed genus, “a sufficient description of a genus . . . requires the disclosure of either a representative number of species falling within the scope of the genus or structural features common to the members of the genus so that one of skill in the art can ‘visualize or recognize’ the members of the genus.” Ariad, 598 F.3d at 1350; see also Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). That does not appear to be the case here—the present record does not support that the described asymmetrical buttress, serrated style of different temporary screw threading (relative to that of the definitive screw and regardless of the direction of the threads for rotation) is sufficiently representative of the genus’s “different” thread patterns/profiles. See, e.g., Ex. 1006 (a buttress style thread does not function the same as a buttress reverse or 75º joint profile or rounded, or trapezoidal thread).” slip op. at 30

    Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham
    Patents in suitUS 11,937,992
  • PTAB · Nov 3, 2025 · IPR2025-00827 · APJ Barry L Grossman · IPR · Institution

    The Board instituted IPR on claims 1–5, 7–14, 16–19, 22–26, and 28–32, finding a reasonable likelihood that Renisch anticipates at least one challenged claim.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not perceive a need to construe any claim limitation at this time. This, however, does not preclude the parties from arguing proposed constructions of the claims during trial. Indeed, the parties are hereby given notice that any disputed claim construction, in general, should be addressed at trial and, if so, should be addressed clearly in a designated section of briefing rather than relegated to arguments on the merits of patentability. Claim construction, if necessary, will be determined at the close of the evidentiary record and after any hearing. slip op. at 15

    • BurdenDecided for petitioner

      “Compliance with the Particularity Requirements of 35 U.S.C. § 312(a)(3) Patent Owner asserts that the Petition fails to meet the particularity requirements of 35 U.S.C. § 312(a)(3). Prelim. Resp. 18–26. According to Patent Owner, “Petitioner’s excessive internal cross-referencing impermissibly forces the Board and Patent Owner to piece together scattered portions of the Petition (and exhibits).” Id. at 26. Patent Owner concludes that “the Petition fails to adequately map the references to the claim elements with particularity.” Id. We disagree. Using claims 1 and 10 as an example, Petitioner asserts: Claim 10 recites a “system for automatically processing 3D images” that is substantively identical to the “method for automatically processing 3D images” recited in claim 1, addressed above. Whereas claim 1 (the method claim) recites a series of steps, each performed “by a processor,” claim 10 (the system claim) recites a “processor” with stored instructions that perform the same steps recited in claim 1. Similarly, dependent claims 11–14, 16, and 26 are substantively identical to dependent claims 2–5, 7, and 19. Pet. 41–42. Claims 1 and 10 contain similar elements and limitations. Petitioner’s reference, for example, in the Petition’s analysis of claim 10, back to the analysis of claim 1 concerning nearly identical elements and limitations (id. at 42) is a matter of efficiency and is sufficiently clear for us to determine the basis for Petitioner’s challenges. We determine that the Petition does not violate the statutory requirement for particularity.” slip op. at 16

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

      “We have considered Patent Owner’s arguments, but, on this record, are not persuaded. We recognize that Dr. Sonka provides a different opinion than Petitioner and Dr. Rosen. Dr. Sonka testifies that in his opinion “the distinctions between Renisch and claim 1 go beyond terminology.” Ex. 2014 ¶ 79. At this stage, in the absence of a full record, we need not record, it appears that Renisch discloses the elements of limitation [1(c)] at paragraphs 26–31, where it discloses obtaining a scanned 3D image of a fuller anatomy, i.e., a segmentation map, and then using a segmentation unit (76) to define the boundaries of anatomical structures of interest within that fuller anatomy, i.e., creating a plurality of segmentation masks, using a library, models, clustering, edge detection, region growing, neural networks, and/or an atlas of normal anatomical structures, and then identifying hot spots of interest within those anatomical structures of interest, and identifying organs with lesions and those without. Ex. 1005 ¶¶ 26–31. Based on the record before us and the specific disclosures in Renisch, as discussed in this Decision, we determine that Petitioner has met the “reasonable likelihood” standard necessary to institute an inter partes review proceeding. Although we address only Ground A and claims 1 and 10 herein for the purposes of institution, as noted above, we will address all asserted grounds and challenged claims in any final decision.” slip op. at 20

    Claim construction§ 102 anticipationDiscretionary denialcites Phillips
    Patents in suitUS 11,941,817
  • PTAB · Oct 7, 2025 · IPR2025-00677 · APJ Ryan H Flax · IPR · Institution

    Instituted review of claims 1–7, 10, 13, 16, 18, and 19 on all four anticipation grounds because the Petition showed a reasonable likelihood of prevailing.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “Under 37 C.F.R. § 42.4(a), we have authority to determine whether to institute trial in an inter partes review. We may institute an inter partes review if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’811 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “ORDINARY LEVEL OF SKILL IN THE ART Petitioner contends: As of the effective priority date of the ‘811 patent, a person of ordinary skill in the relevant field at the time would be familiar with the pre-existing point of sale and network-based technologies as above, for example in Section I.D. above as well as the “BACKGROUND OF THE INVENTION” portion of the ‘811 patent specification. Ex. 1001, col. 1, l. 21 – col. 5, l. 10. This person would include someone who has, through education or practical experience, at least 2-3 years of experience in software engineering, such as the development of data sets, database management, and networking integration for dynamic content generation and network-based distribution. Pet. 10. Patent Owner states, “[f]or the purposes of this Preliminary Response only, Patent Owner applies Petitioner’s definition of a person of ordinary skill in the art. See Petition, p. 10.” Prelim. Resp. 14. We accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears to comport with the level of skill in the art reflected in the prior art of record and the ’811 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). C.” slip op. at 10

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

      “The claim language does little to identify any meaning of “point-of- sale interface.” Looking to the ’811 patent’s written description, it never uses the term “point-of-sale interface,” but it states “moder[n] Point-of-Sale (POS) systems . . . capture rich details around their customers’ purchasing activity.” Ex. 1001, 1:52–54. The Specification further states that “[t]he transaction data may be stored locally to a point-of-sale (“POS”) device or to a remote location, such as a cloud service provider.” Id. at 2:23–25. Regarding the associated term “interface,” the written description states, “[i]n general, as used herein, an interface is a component of computer executable instructions stored in a tangible, non-transitory medium and executed by processor 12 to present a display of information related to the interface allowing someone to view and/or interact with the presented information.” Id. at 4:32–37. We are pointed to and find nothing in the ’811 patent’s prosecution history that sheds any further light on the meaning of this language. See Pet. 12–14; Prelim. Resp. 12–13; Ex. 1003. Based on the intrinsic record, we find that the ’811 patent describes a point-of-sale as being local to a transaction, e.g., a sale/purchase of a product” slip op. at 14

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

      “At this point in the proceeding, we do not agree with Patent Owner that the recited survey module must be autonomous, self-contained, or a web-container package. As discussed above, we preliminarily interpret this term to mean software code for displaying a survey question. We find no support in the current record to add to this definition any additional requirements related to autonomy, self-containment, or a web-based context for the survey module. The Petition (at 19) points to Douglas as teaching the claimed survey module, i.e., in Douglas, software sent to the customer for taking a product survey on the display of the customer’s computer device. Douglas teaches, in response to a customer providing a survey trigger (e.g., purchase data signals), a survey generator creates a transaction-specific survey (e.g., “Was the item you found too expensive?”) and transmits it to the customer’s device (e.g., a mobile phone with a touchscreen); the survey is interactive; and the customer touches or clicks their device’s screen to respond to the survey questions. Ex. 1007 ¶¶ 34–35. Moreover, Douglas also discloses that its survey “interact[s] with the customer using one or more software applications on customer device 106,” which may be, e.g., a computer or mobile phone, further, “[t]he one or more software applications may be provided by survey system 101, or merchant 107, or a third party,” and finally, “[t]he one or more software applications may be web-based applications and/or native mobile applications installed on the customer device 106.” Id. ¶¶ 18–20; see also Prelim. Resp. 35 (conceding as much). Thus, Douglas appears to disclose a survey system where a survey server responds to a triggering survey token created by a merchant and sent by a customer, that connects the customer with a particular purchase, by creating a purchase-specific survey question and sending it to a customer’s electronic device, where the survey question is displayed on a web-browser by software, and the customer’s survey answers may then spur the system to generate and follow up with additional questions. See Ex. 1007 ¶¶ 18–20, 27–29, 33–39. This appears to include the claimed survey module at issue. As for Patent Owner’s argument that the recited survey module must” slip op. at 31

    Claim construction§ 102 anticipationcites Phillips
    Patents in suitUS 10,430,811
  • PTAB · Sep 26, 2025 · IPR2025-00605 · APJ Tawen Chang · IPR · Institution

    The Board instituted IPR on claims 1–7 and all petitioned grounds, finding a reasonable likelihood that claim 1 is anticipated by Desjarlais or Moore or obvious over Lazar alone.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “SAS, 138 S. Ct. at 1356. Thus, because we determine, based on the arguments and evidence on the present record, that there is a reasonable likelihood Petitioner would prevail with respect to claim 1, we institute an inter partes review of all challenged claims under each Ground presented in the Petition. Id.; see also 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”). III. CONCLUSION For the reasons provided above, we find that Petitioner has demonstrated a reasonable likelihood of showing at trial that at least one of the challenged claims of the ’859 patent is unpatentable under at least one ground. Accordingly, we institute inter partes review of all challenged claims based on all the Grounds presented in the Petition.” slip op. at 49

    • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

      “As Petitioner points out, the cited disclosure in the ’935 provisional does not “mention[] positions 364 and 368 together as a pair of positions for potential mutations on two chains.” Pet. 28 (citing Ex. 1002 ¶¶ 109–19). Although Patent Owner is correct that examples or actual reduction to practice are not required for adequate written description and “[a] specification may . . . contain a written description of a broadly claimed 34 invention without describing all species that [the] claim encompasses,” Prelim. Resp. 15 (quoting Ariad Pharms., 598 F.3d at 1352 and Cordis Corp. v. Medtronic AVE Inc., 339 F.3d 1352, 1365 (Fed. Cir. 2003)), the ’935 provisional must still “reasonably convey[] to those skilled in the art that the inventor[s] had possession of the claimed subject matter” as of the relevant date. Regeneron Pharms., Inc. v. Mylan Pharms. Inc., 127 F.4th 896, 914 (Fed. Cir. 2025); Ariad, 598 F.3d at 1351. In this case, Table A of the ’935 provisional discloses a list of CH3 domain interface residues and identifies, for each interface residue in heavy chain A, the contacting residue in the corresponding chain B. Ex. 1030, 17, Table A. Table A does not, however, describe any particular substitutions or pairs of substitutions that should be made to the CH3 domains. See, e.g., Pet. 28 (citing Ex. 1002 ¶¶ 109–119). Table 7 of the ’935 provisional does identify specific amino acid substitutions in CH3 domains, including substitutions resulting in a positively charged residue at position 364 (e.g., S364K) and a negatively charged residue (e.g., L368D) at position 368. Ex. 1030, 52, Table 7. Patent Owner argues that this table “discloses specific positions for ‘identification of novel charge pair mutants.’” Prelim. Resp. 13 (citing Ex. 2010 ¶ 48). As Petitioner points out, however, while Example 13 of the ’935 provisional relates to identification of novel charge pair mutants, Table 7 itself was only a “first step” in this identification process. Ex. 1030, 51:6–17. In this step, “many interface contact residues in the IgG CH3 domain were scanned one by one or in groups for substitutions that would result in repulsion of 35 identical heavy chains” so that identified substitutions can then be used to generate antibodies “by engineering matched pairs of CH3 residues in one or more IgG heavy chains – CH3 regions” in follow up experiments. Id. Accordingly, Table 7 does not appear to describe heterodimer combinations, such as those that would result from a pairing of chains with different substitutions. Pet. 29–30 (citing, e.g., Ex. 1002 ¶¶ 111–118). As Petitioner further points out, the follow up experiments testing the matched pairs of CH3 residues did not include paired substitutions at positions 364 and 368. Id. at 29–31. Patent Owner points to disclosure in the ’935 provisional describing, as a distinguishing feature of its invention, the substitution of non-charged or neutral amino acids in wildtype CH3 with charged residues, which according to the ’935 provisional has the “advantage that at least one additional charge-charge interaction in the CH3 interface is created.” Prelim. Resp. 12 (citing, e.g., Ex. 2010 ¶¶ 42–48). For the same reasons discussed above, Petitioner has sufficiently established, for purposes of institution, that such disclosure would not reasonably convey to an ordinarily skilled artisan that the inventors had possession of the entire genus of heterodimeric antibodies comprising CH3 domains wherein a non-charged amino acid is replaced with a charged residue so as to create an additional charge-charge interaction in the CH3 interface. In this regard, we also note that “a description that merely renders the invention obvious does not satisfy the [written description] requirement.” Ariad, 598 F.3d at 1352.” slip op. at 34

    • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference is prior artDecided for petitioner

      “adequately describes a heterodimeric antibody comprising the recited charged residues at the recited positions of the CH3 domains, i.e., “a positively charged amino residue at position 364” at a first CH3 domain and “a negatively charged amino acid residue at position 368” of the second CH3 domain. Having considered the evidence of record at this preliminary stage of the proceeding, and for the reasons set forth below, we are persuaded that Petitioner has shown sufficiently, for purposes of institution, that the ’935 provisional does not provide adequate written description support for claim 1 of the ’859 patent and that, accordingly, Desjarlais and Moore qualify as prior art to that claim. As Petitioner points out, the cited disclosure in the ’935 provisional does not “mention[] positions 364 and 368 together as a pair of positions for potential mutations on two chains.” Pet. 28 (citing Ex. 1002 ¶¶ 109–19). Although Patent Owner is correct that examples or actual reduction to practice are not required for adequate written description and “[a] specification may . . . contain a written description of a broadly claimed 34 invention without describing all species that [the] claim encompasses,” Prelim. Resp. 15 (quoting Ariad Pharms., 598 F.3d at 1352 and Cordis Corp. v. Medtronic AVE Inc., 339 F.3d 1352, 1365 (Fed. Cir. 2003)), the ’935 provisional must still “reasonably convey[] to those skilled in the art that the inventor[s] had possession of the claimed subject matter” as of the relevant date. Regeneron Pharms., Inc. v. Mylan Pharms. Inc., 127 F.4th 896, 914 (Fed. Cir. 2025); Ariad, 598 F.3d at 1351.” slip op. at 34

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “The ’859 patent does not provide an explicit definition of “immunoglobulin class.” Nevertheless, we do not construe that term to require “two heavy chains with four domains, VH, CH1, CH2, and CH3, and two Fab arms.” As an initial matter, the Specification teaches that antibodies include, 16 e.g., IgE and IgM — which have an additional CH4 domain in their heavy chains — as well as functional derivatives and/or fragments of known antibody isotypes. Ex. 1001, 11:44–48. Patent Owner’s proposed construction, which limits antibodies to those having two Fab arms and “two heavy chains with four domains, VH, CH1, CH2, and CH3,” excludes these embodiments and cannot be correct. Moreover, the ’859 patent defines antibody as containing “one or more domains” that bind an epitope on an antigen. Ex. 1001, 11:39–44. Thus, an antibody does not require two Fab arms as in a native immunoglobulin molecule.12 The ’859 patent also describes a preferred embodiment as “Ig-like molecules.” Id. at 11:49–52. Thus, we look to the definition of “Ig-like molecule” in the ’859 patent, i.e., “a proteinaceous molecule that possesses at least one immunoglobulin (Ig) domain,” to inform our understanding of the phrase “immunoglobulin class of proteins.” Ex. 1001, 11:4–6. Accordingly, we further construe “immunoglobulin class of proteins” to mean proteinaceous molecules comprising at least one domain that is derived from or shares sequence homology with an immunoglobulin domain.” slip op. at 16

    Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
    Patents in suitUS 11,926,859
Page 1 of 14
← Previous12345…Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.