• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Penumbra, Inc. v. Rapidpulse, Inc.No claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01261 · APJ Jamie T Wisz · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because the asserted combinations did not teach the claimed predetermined cycle for controlling distal fluid flow.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(1) a person with a B.S. in engineering or an equivalent field, with two-four years of academic or industry experience in aspiration embolectomy and thrombectomy or comparable industry experience who would, where appropriate, work or consult with others, including a physician, to develop embolectomy or thrombectomy devices; or (2) an interventional neurosurgeon with at least three years of experience developing and/or using medical devices in embolectomy or thrombectomy procedures, and who would, where appropriate, work or consult with others, including an engineer, to develop such a medical device. Pet. 11 (citing Ex. 1005 ¶ 48). Petitioner also contends that, “[a] person with less education but more relevant practical experience, or more relevant education but less practical experience, may also meet this standard.” Id. Patent Owner states that for purposes of its PO Response, it “accepts ¶ 44). We adopt Petitioner’s characterization because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’402 patent and the cited prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “specification explicitly includes sensors similar to those in the prior art in support of their argument that the claimed “predetermined cycle” must not exclude the use of such sensors. Pet. Reply 15 (citing Ex. 1001, 32:55–33:7, 40:66–41:5, 44:9–29). We reviewed the portions of the specification cited by Petitioner. We agree with Patent Owner that one excerpt discussing sensor use appears to be directed to triggering the predetermined cycle rather than causing timing changes during the cycle itself (Ex. 1001, 32:55–66) (describing use of a pressure sensor to “determine when the vacuum channel 3 is clogged by a thrombus and automatically perform the unclogging procedures described herein”), while another excerpt discusses a sensor that Petitioner that the ’402 patent discusses the use of sensors to “tune” the system and that such “tuning” can be done statically (setting the cycle timing in advance) or dynamically (adjusting the timing during the cycle itself). See Ex. 1001, 48:19–49:50. Overall, we find that these disclosures involving sensors demonstrate that sensors may be used in various ways in different embodiments. However, none of these disclosures explicitly discuss the use of sensors in conjunction with a “pre-determined cycle.” Therefore, we find that the ’402 patent specification’s discussion of “sensors” are not particularly informative as to the appropriate construction of a “predetermined cycle” and do not outweigh the other explicit disclosures of “predetermined cycle” in the patent. We next turn to the other intrinsic evidence discussed by the parties — the prosecution history. As discussed by Patent Owner, in the Notice of Allowance, the Examiner found that Garrison did not teach or suggest a “predetermined cycle” because Garrison’s controller “changed the cycle of opening and closing the valves based on feedback from sensors.” Ex. 1004, 86. We acknowledge that the patent applicant filed subsequent comments during prosecution in which they stated that they “do[] not concede that the Examiner’s characterizations of the terms of the claims and the prior art are correct.” Id. at 29. However, we agree with Patent Owner that the importance of the Examiner’s statement in the Notice of Allowance does not rely on it being an express disclaimer (a standard which it does not meet). PO Sur-reply 8. We also considered Petitioner’s contention that the Examiner’s interpretation of Garrison may have been in error (PO Resp. 16); however, even if this were true, the Examiner’s statement still provides helpful insight into how the Examiner was interpreting the term sensors to change the opening and closing of valves during a cycle was not a “predetermined cycle.” Id. at 86. In sum, we find that Patent Owner’s proposed construction is consistent with the usage of the term “predetermined cycle” in the ’402 patent specification and prosecution history. Thus, after considering all of the cited evidence, we construe “predetermined cycle” to mean that “the timing of the sequence of valve operations in the cycle is determined beforehand, i.e., fixed, rather than varying based on feedback after operation begins.”” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “2. Other Terms The parties also provided proposed constructions for the limitations of “[limited/limiting] to a positive amount of exit flow” and “control[ling] fluid flow in and out from the distal end of the catheter.” See Pet. 15–16; Pet. Reply 1–8; PO Resp. 22–24; PO Sur-Reply 2–6. However, having evaluated the arguments and evidence before us, we determine that construction of these terms is not necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that neither Petitioner nor Mr. Brown propose any combination of Yang and Mullins that does not include Mullins’s pressure sensor in order “to control fluid flow in and out from the distal end of the catheter.” Indeed, in addressing the “predetermined cycle” limitation, Mr. Brown contends that Mullins discloses a “cycling controller that ‘varies aspiration pressure according to sensed pressure within the catheter lumen.’” Ex.1005 ¶¶ 131–32 (citing, e.g., Ex.1008, 27:40–28:20 (“[a] novel aspect of this pump system is the incorporation of feedback into the pump algorithm in order to produce more effective pressure cycling”)). This use of a sensor to change pressure during a cycle, is not a “predetermined cycle” under our construction. combinations is its discussion of distal end flow control, not for its sensors.” Pet. Reply 17 (citing Ex. 1035 ¶ 83). However, Petitioner’s obviousness grounds rely on the combination of Yang and Mullins, especially with regard to Mullins’s disclosure of “a controller” in order “to control fluid flow in and out.” As discussed above, Mullins relies on the sensor-feedback approach in order to control flow and we find that Petitioner has not presented persuasive evidence of how the combined disclosures of Yang and Mullins would control flow without using Mullins’s sensor feedback approach. See W.L. Gore & Assocs., Inc. v. Garlock, Inc., 721 F.2d 1540, 1550 (Fed. Cir. 1983) (error to “consider[] … references in less than their entireties, i.e., in disregarding disclosures in [them] … that diverge from and teach away from the invention”). Therefore, we determine that Petitioner has not sufficiently shown that the combination of Yang and Mullins discloses or renders obvious “a controller configured to open and close the vacuum valve and the vent valve in a predetermined cycle to change a level of vacuum at the distal end of the catheter and to control fluid flow in and out from the distal end of the catheter.” Accordingly, having considered the parties’ respective evidence and arguments, we find that Petitioner has not shown by a preponderance of the evidence that claim 1 of the ’402 patent would have been unpatentable as obvious over the combination of Yang and Mullins.” slip op. at 27

  Patent outcomesUS 11,406,402 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,406,402
• Alpinestars S.P.A. / Alipinestars USA Inc. v. Dainese S.P.A.Rehearing denied
  PTAB · Feb 9, 2026 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Rehearing

  The Board denied rehearing, leaving institution denied because Petitioner did not show a reasonable likelihood of prevailing on claims 1–22 under the challenged obviousness grounds.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “Petitioner misstates the Decision’s reasoning. As is clear from the previous discussion, we determined that Petitioner’s articulated reasons for combining EP’536 with CN’180 lacked a rational underpinning, not because “EP’536 does not relate to ‘air bags,’” but because the means by which EP’536’s device inflates differs fundamentally from that of CN’180’s device. Dec. 17–18. Petitioner did not acknowledge this critical difference in the Petition, and continues not to do so in its Rehearing Request.” slip op. at 5

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “EP’536 with CN’180 lacked a rational underpinning because EP’536’s inflation mechanism differs fundamentally from CN’180’s inflation mechanism. Dec. 17–18. As we stated, whereas CN’180’s fall-protection belt uses an airbag that requires an external source of pressurized air to inflate, EP’536’s garment does not need an external inflation device because “the gas generating agent 18 in each envelope automatically generates gas and inflates the envelopes in response to rising temperatures.” Id. at 18 (citing Ex. 1004 ¶ 15; Ex. 1005 ¶¶ 5, 19). This difference reflects the fundamentally different purposes of the two devices: CN’180’s device is designed to provide “fall protection” to, e.g., “elderly people,” (Ex. 1005 ¶ 1, 3), whereas EP’536’s device provides “adaptive thermal insulation” for, e.g., garments worn by fire fighters. Ex. 1004 ¶¶ 1–3, 250. Because of the different means by which EP’536’s and CN’180’s devices inflate and the different purposes for doing so, we were not persuaded that one of ordinary skill in the art would have combined the references as Petitioner proposed. Dec. 18. We further noted that the modification would not have improved the reusability of EP’536’s device “by having only one mechanism to recharge,” because EP’536’s “gas generating agent does not need any ‘mechanism to recharge.’” Dec. 18. Instead, we noted EP’536’s teaching that its gas generating agent “automatically recombines or condenses in response to a temperature decrease to return the envelopes, and therefore the garment, to its original thickness, at which point the gas generating agent is ready for subsequent reactivation.” Id. (citing Ex. 1004 ¶¶ 139–141). Finally, we determined that replacing EP’536’s envelopes with CN’180’s airbag “would have made EP’536’s invention unsuitable for its intended purpose: providing a protective garment with ‘adaptive thermal insulation.’” Dec. 19. We stated that “Petitioner does not suggest, and we have found nothing in the record to establish, that CN’180’s airbag would provide this feature.” Id. at 20.” slip op. at 3

  • Obviousness (§103) › KSR rationalesMotivation not foundNot shown unpatentable

    “rationales for combining EP’536 and CN’180. Reh’g Req. 6–7. First, Petitioner asserts that we “improperly rejected Petitioner’s ‘simple substitution’ evidence in view of [the Board’s] incorrect conclusion that EP’536 does not disclose an ‘external source of inflation [EP’536’s dosing aids].’” Id. at 6 (citing Dec. 18–19). This argument is unpersuasive at least because, as we discussed above, EP’536’s dosing aids do not constitute an external source of inflation. Petitioner further argues that we incorrectly evaluated its “obvious to try” rationale because, contrary to our analysis, Petitioner did in fact identify a problem to be solved by its “finite number of solutions”: “simplify[ing] the design and reduc[ing] the number of required inflation mechanisms.” Id. at 6–7. The Petition’s entire “obvious to try” discussion is as follows: [A] POSITA would have found it obvious to try a one-piece airbag 10 with strip-shaped inflation units 12 in the EP’536- CN’180 airbag system because it would have been a selection from a finite number of identified predictable solutions (i.e., using one chamber with connected individual inflation units 12 versus multiple individual envelopes 20). 5 Petitioner also argues that dosing aids are “needed in order to make the disclosed device reusable.” Reh’g Req. 5–6. This is incorrect, as EP’536 conveys that the reusability of the device is a result of the gas generating agent condensing or recombining when temperatures fall. Ex. 1004 ¶¶ 139– 141. Even if it were true, however, it is unclear how it would support Petitioner’s argument. Pet. 16. As is evident, Petitioner did not identify a design need, market pressure, or other problem that would have been addressed by its identified “solutions,” and therefore we were not persuaded by this rationale. Dec. 19. Petitioner’s attempt to cure this deficiency in its Rehearing Request is tardy. We cannot misapprehend or overlook an assertion that Petitioner fails to make in the Petition. It is also insufficient. Petitioner does not provide any evidence of a known design need or market pressure to “simplify [EP’536’s] design” or reduce the number of “required inflation mechanism” it uses.” slip op. at 7

  § 103 obviousness
  Patents in suitUS 12,012,065
• Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed

    “We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached

    “Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12

  Patent outcomesUS 11,780,689 unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 11,780,689
• Light & Wonder, Inc. v. Evolution Malta LimitedInstituted
  PTAB · Dec 19, 2025 · IPR2025-01078 · APJ Robert L Kinder · IPR · Institution

  The Board instituted IPR on claims 1, 2, 4–12, 14–22, and 24–30, finding a reasonable likelihood that Kido anticipates at least one challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless. . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Moreover, a decision to institute under 35 U.S.C. § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018).” slip op. at 2

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “At this juncture in the proceeding, and based on the current record, we do not agree with Patent Owner that “payout,” as claimed, should be limited to “the amount a player will win in relation to the amount wagered.” We recognize, as Patent Owner points out, that the examples provided in the Specification are listed in odds format. See id. at 2. The Specification, however, also states that “[a]ny suitable payouts can be used in some embodiments.” Ex. 1011, 5:18–21. This language suggests a broader interpretation of “payout” beyond just payout odds and we therefore decline to import the wager limitation into the claim term. Although the ’371 patent generally describes payouts in terms of odds, like 49:1, the intrinsic record lacks clear evidence necessary to limit the claims as Patent Owner proposes.” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner proposes “a person having at least a Bachelor’s Degree in electrical engineering, computer science, or computer engineering, or undergraduate training in an equivalent field and at least two years of relevant experience in electronic gaming technology.” Pet. 10 (citing Ex. 1003 ¶¶ 22–26). Petitioner further notes that “[a]dditional graduate education could substitute for professional experience, and significant work experience could substitute for formal education.” Id. Patent Owner does not dispute this level of skill. See Prelim. Resp. 13–14 (“Evolution does not set forth an alternative level of skill for a person of ordinary skill in the art”). For purposes of this Decision, we adopt Petitioner’s proposal, which comports with the teachings of the ’371 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “Based on the evidence before us, we find persuasive Petitioner’s contention that Kido’s accumulated jackpot paid when landing on a star mark reads on the claimed “a first selected position . . . to have an increased payout . . . greater than a first non-selected payout.” See Pet. 25–27, 30, 35, 36. As explained above, the current record does not support limiting the term “payout” to just the amount a player will win in relation to the amount wagered. As Petitioner notes, a payout that receives Kido’s accumulated Prog bonus payout is necessarily higher than a payout that does not receive the Prog bonus. Pet. 35–36 (“had the first selected position not been randomly selected, the player would only be eligible for the basic payout”). Further, Kido even describes its bonus routines and jackpots as payouts. Kido describes, for example, that “[w]hen the privilege unit 113 obtains the win information from the special game value award mark win determining unit 112, it awards, as a payout, the game value stored in the accumulated game value memory 117” and it describes the “jackpot (JP) amount” as “a special payout.” Ex. 1007 ¶¶ 119, 129.” slip op. at 14

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 11,756,371
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.